blob: a4c503e12b127fe333e86d8f7a472f06c86420a2 [file] [log] [blame]
Luca Prete22613652018-12-17 14:17:43 -08001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15node ("${TestNodeName}") {
16 timeout (100) {
17 try {
18 stage ("Parse deployment configuration file") {
Kailashe9108152018-12-19 09:46:11 -080019 sh returnStdout: true, script: "rm -rf ${configBaseDir} helm-repo-tools"
Luca Prete22613652018-12-17 14:17:43 -080020 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
Kailash093f55b2018-12-19 09:33:49 -080021 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-repo-tools"
Luca Prete22613652018-12-17 14:17:43 -080022 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
23 }
24 stage('Clean up') {
25 timeout(10) {
26 sh returnStdout: true, script: """
27 rm -rf cord-tester
28 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
29 for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
30 do
31 echo "Purging chart: \${hchart}"
32 helm delete --purge "\${hchart}"
33 done
34 """
35 timeout(5) {
36 waitUntil {
37 helm_deleted = sh returnStdout: true, script: """
38 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
39 helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
40 """
41 return helm_deleted.toInteger() == 0
42 }
43 }
44 timeout(5) {
45 waitUntil {
46 kubectl_deleted = sh returnStdout: true, script: """
47 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
48 kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
49 """
50 return kubectl_deleted.toInteger() == 0
51 }
52 }
53 }
54 }
55 stage('Add CORD repository') {
56 sh returnStdout: true, script: """
57 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
58 helm repo add cord https://charts.opencord.org
59 helm repo update
60 """
61 timeout(1) {
62 waitUntil {
63 cord_repo_present = sh returnStdout: true, script: """
64 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
65 helm repo list | grep cord | wc -l
66 """
67 return cord_repo_present.toInteger() == 1
68 }
69 }
70 }
71 stage('Install CORD Platform') {
72 sh returnStdout: true, script: """
73 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
You Wangbe85ad72018-12-18 14:18:32 -080074 helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n cord-platform --version 6.1.0 cord/cord-platform
Luca Prete22613652018-12-17 14:17:43 -080075 """
76 timeout(1) {
77 waitUntil {
78 cord_helm_installed = sh returnStdout: true, script: """
79 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
80 helm ls | grep -i cord-platform | wc -l
81 """
82 return cord_helm_installed.toInteger() == 1
83 }
84 }
85 }
Luca Prete0f3d5782018-12-20 14:42:50 -080086 stage('Wait for etcd-operator to be installed') {
87 timeout(10) {
88 waitUntil {
89 etcd_operator_installed = sh returnStdout: true, script: """
90 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
91 kubectl get pods | grep -i etcd-operator | grep -i running | wc -l
92 """
93 crd_present = sh returnStdout: true, script: """
94 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
95 kubectl get crd | grep -i etcd | wc -l
96 """
Kailash44f27952018-12-20 16:21:03 -080097 return etcd_operator_installed.toInteger() + crd_present.toInteger() == 6
Luca Prete0f3d5782018-12-20 14:42:50 -080098 }
99 }
100 }
Luca Prete22613652018-12-17 14:17:43 -0800101 stage('Install SEBA Profile') {
102 sh returnStdout: true, script: """
103 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
You Wangbe85ad72018-12-18 14:18:32 -0800104 helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n seba --version 1.0.0 cord/seba
Luca Prete22613652018-12-17 14:17:43 -0800105 """
106 timeout(1) {
107 waitUntil {
108 seba_helm_installed = sh returnStdout: true, script: """
109 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
110 helm ls | grep -i seba | wc -l
111 """
112 return seba_helm_installed.toInteger() == 1
113 }
114 }
115 }
116 stage('Install ATT workflow') {
117 sh returnStdout: true, script: """
118 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
Kailashcaeb82b2019-01-03 13:04:15 -0800119 helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n att-workflow --version 1.0.2 cord/att-workflow
Luca Prete22613652018-12-17 14:17:43 -0800120 """
121 timeout(1) {
122 waitUntil {
123 attworkflow_helm_installed = sh returnStdout: true, script: """
124 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
125 helm ls | grep -i att-workflow | wc -l
126 """
127 return attworkflow_helm_installed.toInteger() == 1
128 }
129 }
130 }
131 stage('Check containers are running') {
132 timeout(20) {
133 waitUntil {
Kailash093f55b2018-12-19 09:33:49 -0800134 sh returnStdout: true, script: """
Luca Prete22613652018-12-17 14:17:43 -0800135 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
Kailash093f55b2018-12-19 09:33:49 -0800136 helm-repo-tools/wait_for_pods.sh
Luca Prete22613652018-12-17 14:17:43 -0800137 """
Luca Prete22613652018-12-17 14:17:43 -0800138 pods_completed = sh returnStdout: true, script: """
139 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
Kailash392f4f42018-12-18 13:41:43 -0800140 kubectl get pods --all-namespaces | grep -i completed | grep -E -v 'docker-registry|mavenrepo|ponnet|kube-system' | wc -l
Luca Prete22613652018-12-17 14:17:43 -0800141 """
142 return pods_completed.toInteger() == 3
143 }
144 }
145 }
146 if ( params.reinstallOlt ) {
147 stage('Reinstall OLT software') {
148 for(int i=0; i < deployment_config.olts.size(); i++) {
149 sh returnStdout: true, script: """
150 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'
151 """
152 timeout(5) {
153 waitUntil {
154 olt_sw_present = sh returnStdout: true, script: """
155 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
156 """
157 return olt_sw_present.toInteger() == 0
158 }
159 }
160 sh returnStdout: true, script: """
161 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}"
162 """
163 timeout(5) {
164 waitUntil {
165 olt_sw_present = sh returnStdout: true, script: """
166 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
167 """
168 return olt_sw_present.toInteger() == 1
169 }
170 }
171 // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
172 if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') {
173 sh returnStdout: true, script: """
174 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc'
175 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh'
176 """
177 }
178 }
179 }
180 stage('Restart OLT processes') {
181 for(int i=0; i < deployment_config.olts.size(); i++) {
182 timeout(5) {
183 sh returnStdout: true, script: """
184 ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts
185 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist stop' || true
186 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt stop' || true
187 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/bal_core_dist.log'
188 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/openolt.log'
189 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist start &'
190 sleep 5
191 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt start &'
192 """
193 }
194 timeout(15) {
195 waitUntil {
196 onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /var/log/openolt.log | grep \"oper_state: up\" | wc -l'"
197 return onu_discovered.toInteger() > 0
198 }
199 }
200 }
201 }
202 }
203 if ( params.configurePod ) {
204 dir ("${configBaseDir}/${configToscaDir}/att-workflow") {
205 stage('Configure R-CORD - Fabric and whitelist') {
206 timeout(1) {
207 waitUntil {
208 out_fabric = sh returnStdout: true, script: """
209 curl -s -H "xos-username:admin@opencord.org" -H "xos-password:letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
210 """
211 return out_fabric.toInteger() == 1
212 }
213 }
214 }
215 stage('Configure R-CORD - Subscriber') {
216 timeout(1) {
217 waitUntil {
218 out_subscriber = sh returnStdout: true, script: """
219 curl -s -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
220 """
221 return out_subscriber.toInteger() == 1
222 }
223 }
224 }
225 stage('Configure R-CORD - OLT') {
226 timeout(1) {
227 waitUntil {
228 out_olt = sh returnStdout: true, script: """
229 curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
230 """
231 return out_olt.toInteger() == 1
232 }
233 }
234 }
235 }
236 }
237 if ( params.installBBSim ) {
238 dir ("helm-charts") {
239 stage('Install BBSim') {
240 timeout(10) {
241 sh returnStdout: true, script: """
242 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
You Wangbe85ad72018-12-18 14:18:32 -0800243 helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n bbsim bbsim --set onus_per_pon_port=${onuNumber}
Luca Prete22613652018-12-17 14:17:43 -0800244 """
245 }
246 timeout(10) {
247 waitUntil {
248 base_kubernetes_tosca_running = sh returnStdout: true, script: """
249 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
250 kubectl get pods -n voltha | grep -i bbsim | wc -l
251 """
252 return base_kubernetes_tosca_running.toInteger() == 1
253 }
254 }
255 }
256 }
257 dir ("${configBaseDir}/${configToscaDir}/bbsim") {
258 stage('Configure BBSim - OLT') {
259 timeout(1) {
260 waitUntil {
261 out_olt = sh returnStdout: true, script: """
262 curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @bbsim-16.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
263 """
264 return out_olt.toInteger() == 1
265 }
266 }
267 }
268 }
269 }
270 currentBuild.result = 'SUCCESS'
271 } catch (err) {
272 currentBuild.result = 'FAILURE'
273 step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
274 }
275 echo "RESULT: ${currentBuild.result}"
276 }
277}