blob: 10f5e44ab5dfb325ac3e59fe4d9fdb9a6aff75b7 [file] [log] [blame]
Kailash Khalasi164dc142018-09-14 11:49:08 -07001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15node ("${TestNodeName}") {
16 timeout (100) {
17 try {
18 stage ("Parse deployment configuration file") {
19 sh returnStdout: true, script: "rm -rf ${configBaseDir}"
20 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
21 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yml"
22 }
23 stage('Clean up') {
24 timeout(10) {
25 sh returnStdout: true, script: """
26 rm -rf helm-charts cord-tester
27 git clone -b ${branch} ${cordRepoUrl}/helm-charts
28 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
29 for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
30 do
31 echo "Purging chart: \${hchart}"
32 helm delete --purge "\${hchart}"
33 done
34 """
35 timeout(5) {
36 waitUntil {
37 helm_deleted = sh returnStdout: true, script: """
38 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
39 helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
40 """
41 return helm_deleted.toInteger() == 0
42 }
43 }
44 timeout(5) {
45 waitUntil {
46 kubectl_deleted = sh returnStdout: true, script: """
47 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
48 kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
49 """
50 return kubectl_deleted.toInteger() == 0
51 }
52 }
53 }
54 }
55 dir ("helm-charts") {
56 stage('Install Voltha Kafka') {
57 timeout(10) {
58 sh returnStdout: true, script: """
59 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
60 helm install --name voltha-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false incubator/kafka
61 """
62 }
63 timeout(10) {
64 waitUntil {
65 kafka_instances_running = sh returnStdout: true, script: """
66 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
67 kubectl get pods | grep voltha-kafka | grep -i running | grep 1/1 | wc -l
68 """
69 return kafka_instances_running.toInteger() == 2
70 }
71 }
72 }
73 stage('Install voltha') {
74 timeout(10) {
75 sh returnStdout: true, script: """
76 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
77 helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com/
78 helm dep build voltha
79 helm install -n voltha -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcd-operator.customResources.createEtcdClusterCRD=false voltha
80 helm upgrade -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcd-operator.customResources.createEtcdClusterCRD=true voltha ./voltha
81 """
82 }
83 timeout(10) {
84 waitUntil {
85 voltha_completed = sh returnStdout: true, script: """
86 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
87 kubectl get pods -n voltha | grep -i running | grep 1/1 | wc -l
88 """
89 return voltha_completed.toInteger() == 8
90 }
91 }
92 }
93 stage('Install ONOS') {
94 timeout(10) {
95 sh returnStdout: true, script: """
96 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
97 helm install -n onos -f configs/onos.yaml -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml onos
98 """
99 }
100 timeout(10) {
101 waitUntil {
102 onos_completed = sh returnStdout: true, script: """
103 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
104 kubectl get pods | grep -i onos | grep -i running | grep 1/1 | wc -l
105 """
106 return onos_completed.toInteger() == 1
107 }
108 }
109 }
110 stage('Install xos-core') {
111 timeout(10) {
112 sh returnStdout: true, script: """
113 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
114 helm dep update xos-core
115 helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n xos-core xos-core
116 """
117 }
118 timeout(10) {
119 waitUntil {
120 xos_core_completed = sh returnStdout: true, script: """
121 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
122 kubectl get pods | grep -i xos | grep -i running | grep 1/1 | wc -l
123 """
124 return xos_core_completed.toInteger() == 7
125 }
126 }
127 }
128 stage('Install rcord-lite') {
129 timeout(10) {
130 sh returnStdout: true, script: """
131 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
132 helm dep update xos-profiles/rcord-lite
133 helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n rcord-lite xos-profiles/rcord-lite
134 """
135 }
136 timeout(10) {
137 waitUntil {
138 rcord_tosca_completed = sh returnStdout: true, script: """
139 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
140 kubectl get pods | grep -i tosca-loader | grep -i completed | wc -l
141 """
142 return rcord_tosca_completed.toInteger() == 1
143 }
144 }
145 }
146 }
147 stage('Reinstall OLT software') {
148 for(int i=0; i < deployment_config.olts.size(); i++) {
149 sh returnStdout: true, script: """
150 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'
151 """
152 timeout(5) {
153 waitUntil {
154 olt_sw_present = sh returnStdout: true, script: """
155 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
156 """
157 return olt_sw_present.toInteger() == 0
158 }
159 }
160 sh returnStdout: true, script: """
161 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}"
162 """
163 timeout(5) {
164 waitUntil {
165 olt_sw_present = sh returnStdout: true, script: """
166 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
167 """
168 return olt_sw_present.toInteger() == 1
169 }
170 }
171 // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
172 if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') {
173 sh returnStdout: true, script: """
174 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc'
175 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh'
176 """
177 }
178 }
179 }
180 stage('Restart OLT processes') {
181 for(int i=0; i < deployment_config.olts.size(); i++) {
182 timeout(5) {
183 sh returnStdout: true, script: """
184 ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts
185 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'pkill bal_core_dist' || true
186 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'pkill openolt' || true
187 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /broadcom/bal.log'
188 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /broadcom/openolt.log'
189 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cd /broadcom; ./bal_core_dist -C :55001 < /dev/tty1 > ./bal.log 2>&1 &'
190 sleep 5
191 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cd /broadcom; ./openolt -C 127.0.0.1:55001 < /dev/tty1 > ./openolt.log 2>&1 &'
192 """
193 }
194 timeout(15) {
195 waitUntil {
Kailash Khalasi23b693c2018-09-14 14:46:50 -0700196 onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /broadcom/openolt.log | grep \"oper_state: up\" | wc -l'"
Kailash Khalasi164dc142018-09-14 11:49:08 -0700197 return onu_discovered.toInteger() > 0
198 }
199 }
200 }
201 }
Kailash Khalasi4d18e202018-09-14 13:32:16 -0700202 if ( params.configurePod ) {
203 dir ("${configBaseDir}/${configToscaDir}/${profile}") {
Kailash Khalasi164dc142018-09-14 11:49:08 -0700204 stage('Configure R-CORD - Fabric and whitelist') {
205 timeout(1) {
206 waitUntil {
207 out_fabric = sh returnStdout: true, script: """
Kailash Khalasi4d18e202018-09-14 13:32:16 -0700208 curl -s -H "xos-username:admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
Kailash Khalasi164dc142018-09-14 11:49:08 -0700209 """
210 return out_fabric.toInteger() == 1
211 }
212 }
213 }
214 stage('Configure R-CORD - Subscriber') {
215 timeout(1) {
216 waitUntil {
217 out_subscriber = sh returnStdout: true, script: """
Kailash Khalasi4d18e202018-09-14 13:32:16 -0700218 curl -s -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
Kailash Khalasi164dc142018-09-14 11:49:08 -0700219 """
220 return out_subscriber.toInteger() == 1
221 }
222 }
223 }
224 stage('Configure R-CORD - OLT') {
225 timeout(1) {
226 waitUntil {
227 out_olt = sh returnStdout: true, script: """
Kailash Khalasi4d18e202018-09-14 13:32:16 -0700228 curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
Kailash Khalasi164dc142018-09-14 11:49:08 -0700229 """
230 return out_olt.toInteger() == 1
231 }
232 }
233 }
234 }
235 }
236 currentBuild.result = 'SUCCESS'
237 } catch (err) {
238 currentBuild.result = 'FAILURE'
239 step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
240 }
241 echo "RESULT: ${currentBuild.result}"
242 }
243}