diff --git a/ansible/roles/docker/tasks/debian.yml b/ansible/roles/docker/tasks/debian.yml
index f590f17..94188b1 100644
--- a/ansible/roles/docker/tasks/debian.yml
+++ b/ansible/roles/docker/tasks/debian.yml
@@ -1,6 +1,6 @@
 - name: Debian add Docker repository and update apt cache
   apt_repository:
-    repo: deb https://apt.dockerproject.org/repo ubuntu-{{ debian_version }} main
+    repo: "{{ docker_apt_repo | default('deb https://apt.dockerproject.org/repo ubuntu-{{ debian_version }} main') }}"
     update_cache: yes
     state: present
   tags: [docker]
diff --git a/ansible/roles/java8-oracle/tasks/main.yml b/ansible/roles/java8-oracle/tasks/main.yml
index 809fbee..94aae31 100644
--- a/ansible/roles/java8-oracle/tasks/main.yml
+++ b/ansible/roles/java8-oracle/tasks/main.yml
@@ -5,7 +5,8 @@
 
 - name: Add Oracle Java repository
   sudo: yes
-  apt_repository: repo='ppa:webupd8team/java'
+  apt_repository:
+    repo: "{{ java_apt_repo | default('ppa:webupd8team/java') }}"
 
 - name: Accept Java 8 license
   sudo: yes
diff --git a/config/default.yml b/config/default.yml
index b69f602..33ceee9 100644
--- a/config/default.yml
+++ b/config/default.yml
@@ -38,10 +38,3 @@
 
 docker:
   imageVersion: candidate
-
-otherServers:
-  # Specifies the configuration for dynamically added compute nodes
-  fabric:
-    network: '10.1.1.1/24'
-    range_low: '10.1.1.2'
-    range_high: '10.1.1.253'
diff --git a/config/sample.yml b/config/sample.yml
index 2623c06..ee8e749 100644
--- a/config/sample.yml
+++ b/config/sample.yml
@@ -32,6 +32,8 @@
   # management_network - the network and mask bits to used for hosts on the management
   #                      network
   fabric_ip: '10.6.1.1/24'
+  #fabric_range_low: '10.6.1.2'
+  #fabric_range_high: '10.6.1.100'
   management_ip: '10.6.0.1/24'
   external_ip: '47.135.132.21/24'
   #external_iface: 'eth2'
@@ -75,17 +77,14 @@
   #  - 'management_ignore_names=<name1>,<name2>,...'
   #  - 'management_ignore_module_types=<mtype1>,<mtype2>,...'
   #  - 'management_ignore_bus_types=<btype1>,<btype2>,...'
+  #  - ubuntu_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/archive.ubuntu.com/ubuntu trusty main universe"
+  #  - ubuntu_updates_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/archive.ubuntu.com/ubuntu trusty-updates main universe"
+  #  - docker_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/apt.dockerproject.org/repo ubuntu-trusty main"
+  #  - java_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/ppa.launchpad.net/webupd8team/java/ubuntu trusty main"
+  #  - ansible_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/ppa.launchpad.net/ansible/ansible/ubuntu trusty main"
+  #  - maas_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/ppa.launchpad.net/maas/stable/ubuntu trusty main"
+  #  - dell_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/linux.dell.com/repo/community trusty openmanage"
+  #  - juju_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/ppa.launchpad.net/juju/stable/ubuntu trusty main"
 
 docker:
   imageVersion: candidate
-
-otherNodes:
-  # Experimental
-  #
-  # Specifies the subnet and address range that will be used to allocate IP addresses
-  # to the compute nodes as they are deployed into the POD.
-  fabric:
-    network: 10.6.1.1/24
-    management: 10.6.0.0/24
-    range_low: 10.6.1.2
-    range_high: 10.6.1.253
diff --git a/docs/OFFLINE_INSTALL.md b/docs/OFFLINE_INSTALL.md
new file mode 100644
index 0000000..641c0c6
--- /dev/null
+++ b/docs/OFFLINE_INSTALL.md
@@ -0,0 +1,147 @@
+# Offline (local repository) CORD Install
+It is possible to install CORD using a local Ubuntu application
+repository. This can be useful for several use cases including
+
+- CORD deployments that don't allow Internet access
+- Deploying CORD multiple times if your Internet access is slow
+
+To enable the install of CORD using a local repository you must first build
+a **mirror** of all the repositories utilized by the CORD install procedure
+locally. The CORD head/compute nodes must be able to access the host that is
+acting as a mirror using http. If the head node host has enough disk space, it
+can be the mirror repository.
+
+### Creating the Mirror
+To create the mirror you will need a host running `Ubtunu 14.04LTS Server`
+that has access, at least temporarily, to the Internet. On this host
+`apt-mirror` and `docker-engine` should be installed. `apt-mirror` is a
+utility used to download the Debian packages and index files for the mirror and
+`docker-engine` is used to front the mirror using an `nginx` container.
+
+#### Installing `apt-mirror`
+To install `apt-mirror` the following commands should suffice.
+
+```
+sudo apt-get update
+sudo apt-get install -y apt-mirror
+```
+
+#### Installing `docker-engine`
+To install `docker-engine` please follow the directions provided by Docker at
+https://docs.docker.com/engine/installation/linux/ubuntulinux/.
+
+#### `apt-mirror` Configuration
+`apt-mirror` takes a configuration that downloads the Debian packages and
+indexes to support a mirror. Save the following `apt-mirror` configuration to
+a local file, e.g., `cord-mirror.list`. This will create a mirror for
+machines using the `amd64` architecture. If you need the `i386` architecture
+you can configure that via the `defaultarch` setting or by duplicating each
+repository line, replacing `deb` with `deb-i386`.
+
+The goal is to create a minimal mirror repository as the downloading of the
+artifacts is quite time and space consuming. If you already have an existing
+mirror in your enterprise it is possible to augment that to pull in the
+additional repositories required by CORD, but this is an exercise left up to
+the reader.
+
+```
+############# config ##################
+#
+# set base_path    /var/spool/apt-mirror
+#
+# set mirror_path  $base_path/mirror
+# set skel_path    $base_path/skel
+# set var_path     $base_path/var
+# set cleanscript $var_path/clean.sh
+# set postmirror_script $var_path/postmirror.sh
+set run_postmirror 0
+set defaultarch amd64
+set nthreads     20
+set _tilde 0
+#
+############# end config ##############
+
+deb http://archive.ubuntu.com/ubuntu trusty main universe
+deb http://archive.ubuntu.com/ubuntu trusty-updates main universe
+deb http://apt.dockerproject.org/repo ubuntu-trusty main
+deb http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
+deb http://ppa.launchpad.net/ansible/ansible/ubuntu trusty main universe
+deb http://ppa.launchpad.net/maas/stable/ubuntu trusty main
+deb http://linux.dell.com/repo/community/ubuntu trusty openmanage
+deb http://ppa.launchpad.net/juju/stable/ubuntu trusty main
+
+clean http://archive.ubuntu.com/ubuntu
+clean http://apt.dockerproject.org/repo
+clean http://ppa.launchpad.net/webupd8team/java/ubuntu
+clean http://ppa.launchpad.net/ansible/ansible/ubuntu
+clean http://ppa.launchpad.net/maas/stable/ubuntu
+clean http://linux.dell.com/repo/community/ubuntu
+clean http://ppa.launchpad.net/juju/stable/ubuntu
+```
+
+After the `apt-mirror` configuration is ready, you can start the mirroring
+process using the command
+
+```
+sudo apt-mirror cord-mirror.list
+```
+
+Be sure to replace the `cord-mirror.list` parameter with the path to the file
+in which you saved the `apt-mirror` configuration.
+
+**NOTE:** The mirroring process can take quite a while (3+ hours) and is
+highly dependent on your Internet access speed. The mirroring process will
+download and process about **90 Gigabytes** of data. So get a cup of coffee,
+take a nap, enjoy the great out doors, or simply spend some time on
+Facebook or Netflix.
+
+#### Staring the `HTTP` Archive Server
+Before the archive server is started, the `nginx` docker image should be
+downloaded from dockerhub.com. Once this image is download the host should
+no longer require Internet access and thus the install of CORD can be
+completed offline. To download (pull) the `nginx` image use the following
+command:
+
+```
+sudo docker pull nginx:1.10
+```
+
+The following command can be used to start an `nginx` docker container that
+will front the mirror over `HTTP` so that the the head/compute nodes can
+access the archive. This command will present the archive server on port `8888`
+of the host machine. This can be changed by modifying the command line option
+`-p`. The command line option `-v` is used to specify the location where
+the mirror files were downloaded, `/var/spool/apt-mirror` by default.
+
+```
+sudo docker run \
+    --name local-repository \
+    --restart unless-stopped \
+    -p 8888:80 \
+    -v /var/spool/apt-mirror/:/usr/share/nginx/html \
+    -d nginx:1.10
+```
+
+### Using the Local Repository
+To use a local repository to deploy CORD, the POD deployment configuration must
+be modified to point to the mirror or local repository that you will be using.
+This is done by setting the following variables in the POD deployment
+configuration. In the example below the values are set assuming the host IP
+of the repository is `10.10.10.10` and the mirror was created per the
+instructions above. If you are using a different repository these values may
+have to be customized for you deployment. The simple way of looking at these
+values is that this is the value that will be used in the *Ansible*
+`apt_repository` task under the parameter `repo`.
+
+```
+seedServer
+  extraVars:
+    - ubuntu_apt_repo="deb [arch=amd64] http://10.10.10.10:8888/mirror/archive.ubuntu.com/ubuntu trusty main universe"
+    - ubuntu_updates_apt_repo="deb [arch=amd64] http://10.10.10.10:8888/mirror/archive.ubuntu.com/ubuntu trusty-updates main universe"
+    - docker_apt_repo="deb [arch-amd64] http://10.10.10.10:8888/mirror/apt.dockerproject.org/repo ubuntu-trusty main"
+    - java_apt_repo="deb [arch-amd64] http://10.10.10.10:8888/mirror/ppa.launchpad.net/webupd8team/java/ubuntu trusty main"
+    - ansible_apt_repo="deb [arch-amd64] http://10.10.10.10:8888/mirror/ppa.launchpad.net/ansible/ansible/ubuntu trusty main"
+    - maas_apt_repo="deb [arch-amd64] http://10.10.10.10:8888/mirror/ppa.launchpad.net/maas/stable/ubuntu trusty main"
+    - dell_apt_repo="deb [arch-amd64] http://10.10.10.10:8888/mirror/linux.dell.com/repo/community trusty openmanage"
+    - juju_apt_repo="deb [arch-amd64] http://10.10.10.10:8888/mirror/ppa.launchpad.net/juju/stable/ubuntu trusty main"
+```