Installing CORD-in-a-Box (CiaB)
This guide walks through the steps to bring up a demonstration CORD "POD", running in virtual machines on a single physical server (a.k.a. "CORD-in-a-Box" or just "CiaB"). The purpose of this demonstration POD is to enable those interested in understanding how CORD works to examine and interact with a running CORD environment. It is a good place for novice CORD users to start.
NOTE: Looking for a quick list of essential build commands? You can find it here
NOTE: This guide describes how to install a simplified version of a CORD POD on a single server using virtual machines. If you are looking for instructions on how to install a multi-node POD, you will find them in the Physical POD installtion guide.
What you need (prerequisites)
You will need a target server, which will run both a build environment in a Vagrant VM (used to deploy CORD) as well as CiaB itself.
Target server requirements:
- 64-bit server, with
- 48GB+ RAM
- 12+ CPU cores
- 200GB+ disk
- Access to the Internet (no enterprise proxies)
- Ubuntu 14.04 LTS freshly installed
- User account used to install CORD-in-a-Box has password-less sudo capability (e.g., like the
ubuntuuser)
Target server on CloudLab (optional)
If you do not have a target server available that meets the above requirements, you can borrow one on CloudLab. Sign up for an account using your organization's email address and choose "Join Existing Project"; for "Project Name" enter cord-testdrive.
NOTE: CloudLab is supporting CORD as a courtesy. It is expected that you will not use CloudLab resources for purposes other than evaluating CORD. If, after a week or two, you wish to continue using CloudLab to experiment with or develop CORD, then you must apply for your own separate CloudLab project.
Once your account is approved, start an experiment using the OnePC-Ubuntu14.04.5 profile on the Wisconsin, Clemson, or Utah clusters. This will provide you with a temporary target server meeting the above requirements.
Refer to the CloudLab documentation for more information.
Building a CiaB
There are three main steps to building CiaB:
- Bootstrap the server by installing software dependencies and checking out the CORD code
- Customize the source and configuration if desired
- Running
makecommands to build and deploy the CORD software, and run tests
Download and run the bootstrap script
On the target server, download the script that bootstraps the build process and run it:
This script installs software dependencies (e.g., Ansible, Vagrant) as well as the CORD source code (in ~/cord).
Customize the source and configuration
CiaB can be used as an integration testing platform for patchsets in Gerrit. There is a -p option to cord-bootstrap.sh that will checkout a specific changeset from a gerrit repo during the run. The syntax for this is <project path>:<changeset>/<revision>. It can be used multiple times - for example:
~/cord-bootstrap.sh -v -p build/platform-install:1233/4 -p orchestration/xos:1234/2
will check out the platform-install repo with changeset 1233, revision 4, and xos repo changeset 1234, revision 2. Note that the -p option will only have an effect the first time the cord-bootstrap.sh script is run. You can also just run the repo command directly to download patch sets.
You can find the project path used by the repo tool in the manifest/default.xml file.
Build and deploy the software
Once the system has been bootstrapped, run the following make commands to launch the build:
cd ~/cord/build make PODCONFIG=rcord-virtual.yml config make -j4 build |& tee ~/build.out
The output of the build will be displayed, as well as saved in ~/build.out. Also logs for individual steps of the build are stored in ~/cord/build/logs.
NOTE: If you are connecting to a remote target server, it is highly recommended that you run the above commands in a
tmuxsession, or usemoshto connect to the target rather thanssh. Without one of these, interrupted connectivity between your local machine and the remote server may cause the CiaB install to hang.*
The make -j4 build step takes a long time (at least 1 hour) to run. Be patient! If it hasn't completely failed yet, then assume all is well!
Run basic E2E tests
If the build completed without errors, you can use the following command to run basic end-to-end tests:
cd ~/cord/build make pod-tests
The output of the tests will be displayed, as well as stored in ~/cord/build/logs.
Inspecting CiaB
CiaB creates a virtual CORD POD running inside Vagrant VMs, using libvirt as a backend.
As access to the libvirt socket depends on being in the libvirtd group, you may need to to logout and back in to have your shell session gain this group membership:
~$ groups xos-PG0 root ~$ vagrant status Call to virConnectOpen failed: Failed to connect socket to '/var/run/libvirt/libvirt-sock': Permission denied ~$ logout ~$ ssh node_name.cloudlab.us ~$ groups xos-PG0 root libvirtd
Once you have done this, you can inspect the status of the VM's by setting the VAGRANT_CWD environmental variable to ~/cord/build/scenarios/cord and running vagrant status:
~$ cd cord/build ~/cord/build$ export VAGRANT_CWD=~/cord/build/scenarios/cord ~/cord/build$ vagrant status Current machine states: corddev running (libvirt) head1 running (libvirt) compute1 running (libvirt) compute2 not created (libvirt) compute3 not created (libvirt) This environment represents multiple VMs. The VMs are all listed above with their current state. For more information about a specific VM, run `vagrant status NAME`.
corddev VM
The corddev VM is a build machine used to drive the installation. It downloads and builds Docker containers and publishes them to the virtual head node (see below). It then installs MAAS on the virtual head node (for bare-metal provisioning) and the ONOS, XOS, and OpenStack services in containers. This VM can be entered as follows:
$ ssh corddev
The CORD source tree is mounted at /opt/cord inside this VM.
head1 VM
The head1 VM is the virtual head node of the POD. It runs the OpenStack, ONOS, and XOS services inside containers. It also simulates a subscriber devices using a container. To enter it, simply type:
$ ssh head1
Inside the VM, a number of services run in Docker and LXD containers.
vagrant@head1:~$ docker ps --format "table {{.ID}}\t{{.Names}}\t{{.Image}}"
CONTAINER ID NAMES IMAGE
84c09b156774 rcord_xos_gui_1 docker-registry:5000/xosproject/xos-gui:candidate
52e477e9b188 rcord_xos_ws_1 docker-registry:5000/xosproject/xos-ws:candidate
10a54a4a4f03 rcord_xos_chameleon_1 docker-registry:5000/xosproject/chameleon:candidate
257f4c29967d rcord_xos_tosca_1 docker-registry:5000/xosproject/xos-tosca:candidate
b2c78cf4de7b rcord_xos_ui_1 docker-registry:5000/xosproject/xos-ui:candidate
526a4282610d rcord_xos_core_1 docker-registry:5000/xosproject/xos-ui:candidate
0783438bba1e rcord_vtr-synchronizer_1 docker-registry:5000/xosproject/vtr-synchronizer:candidate
e66bd071bdba rcord_vsg-synchronizer_1 docker-registry:5000/xosproject/vsg-synchronizer:candidate
961ce2793217 rcord_onos-synchronizer_1 docker-registry:5000/xosproject/onos-synchronizer:candidate
7d4b66291c37 rcord_exampleservice-synchronizer_1 docker-registry:5000/xosproject/exampleservice-synchronizer:candidate
a918b5dc6f72 rcord_volt-synchronizer_1 docker-registry:5000/xosproject/volt-synchronizer:candidate
6bc841f6c888 rcord_vrouter-synchronizer_1 docker-registry:5000/xosproject/vrouter-synchronizer:candidate
c99b203f5a7e rcord_vtn-synchronizer_1 docker-registry:5000/xosproject/vtn-synchronizer:candidate
6fef0cffae83 rcord_openstack-synchronizer_1 docker-registry:5000/xosproject/openstack-synchronizer:candidate
26f8cd2e32df rcord_fabric-synchronizer_1 docker-registry:5000/xosproject/fabric-synchronizer:candidate
d99b09ec8e2c rcord_xos_db_1 docker-registry:5000/xosproject/xos-postgres:candidate
2a22f4836172 rcord_xos_redis_1 docker-registry:5000/redis:candidate
392e6e4aa4cf rcord_registrator_1 docker-registry:5000/gliderlabs/registrator:candidate
1899d7d561f9 rcord_consul_1 docker-registry:5000/gliderlabs/consul-server:candidate
ba4e6640a4f0 onosfabric_xos-onos_1 docker-registry:5000/onosproject/onos:candidate
35517eec96e1 onoscord_xos-onos_1 xos/onos:candidate
b591fd1c406f mavenrepo docker-registry:5000/opencord/mavenrepo:candidate
c4a772babeb6 switchq docker-registry:5000/opencord/maas-switchq:candidate
c79f358d03c9 automation docker-registry:5000/opencord/maas-automation:candidate
c02fd40982f6 provisioner docker-registry:5000/opencord/maas-provisioner:candidate
9b4b481bf2f5 allocator docker-registry:5000/opencord/maas-allocator:candidate
2276a0f258ad generator docker-registry:5000/opencord/maas-generator:candidate
bec8d53ebe12 storage docker-registry:5000/consul:candidate
4475dddba35a harvester docker-registry:5000/opencord/maas-harvester:candidate
30d4996337bd registry registry:2.4.0
21289d8b63ff registry-mirror registry:2.4.0
The above shows Docker containers launched by XOS (container names starting with rcord). Containers starting with onos are running ONOS. There is also a Docker image registry, a Maven repository containing the CORD ONOS apps, and a number of microservices used in bare-metal provisioning.
vagrant@head1:~$ sudo lxc list +-------------------------+---------+------------------------------+------+------------+-----------+ | NAME | STATE | IPV4 | IPV6 | TYPE | SNAPSHOTS | +-------------------------+---------+------------------------------+------+------------+-----------+ | ceilometer-1 | RUNNING | 10.1.0.4 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | glance-1 | RUNNING | 10.1.0.5 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | juju-1 | RUNNING | 10.1.0.3 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | keystone-1 | RUNNING | 10.1.0.6 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | mongodb-1 | RUNNING | 10.1.0.13 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | nagios-1 | RUNNING | 10.1.0.8 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | neutron-api-1 | RUNNING | 10.1.0.9 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | nova-cloud-controller-1 | RUNNING | 10.1.0.10 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | openstack-dashboard-1 | RUNNING | 10.1.0.11 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | percona-cluster-1 | RUNNING | 10.1.0.7 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | rabbitmq-server-1 | RUNNING | 10.1.0.12 (eth0) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+ | testclient | RUNNING | 192.168.0.244 (eth0.222.111) | | PERSISTENT | 0 | +-------------------------+---------+------------------------------+------+------------+-----------+
The LXD containers ending with names ending with -1 are running OpenStack-related services. These containers can be entered as follows:
$ ssh ubuntu@<container-name>
The testclient container runs the simulated subscriber device used for running simple end-to-end connectivity tests. Its only connectivity is to the vSG, but it can be entered using:
$ sudo lxc exec testclient bash
compute1 VM
The compute1 VM is the virtual compute node controlled by OpenStack. This VM can be entered from the head1 VM. Run cord prov list to get the node name (assigned by MAAS). The node name will be something like bony-alley.cord.lab; in this case, to login you'd run:
$ ssh ubuntu@bony-alley.cord.lab
Virtual machines created via XOS/OpenStack will be instantiated on this compute node. To login to an OpenStack VM, first get the management IP address (172.27.0.x):
vagrant@head1:~$ source /opt/cord_profile/admin-openrc.sh vagrant@head1:~$ nova list --all-tenants +--------------------------------------+-------------------------+--------+------------+-------------+---------------------------------------------------+ | ID | Name | Status | Task State | Power State | Networks | +--------------------------------------+-------------------------+--------+------------+-------------+---------------------------------------------------+ | 3ba837a0-81ff-47b5-8f03-020175eed6b3 | mysite_exampleservice-2 | ACTIVE | - | Running | management=172.27.0.3; public=10.6.1.194 | | 549ffc1e-c454-4ef8-9df7-b02ab692eb36 | mysite_vsg-1 | ACTIVE | - | Running | management=172.27.0.2; mysite_vsg-access=10.0.2.2 | +--------------------------------------+-------------------------+--------+------------+-------------+---------------------------------------------------+
The VM hosting the vSG is called mysite_vsg-1 and we see it has a management IP of 172.27.0.2. Then run ssh-agent and add the default key (used to access the OpenStack VMs):
vagrant@head1:~$ ssh-agent bash vagrant@head1:~$ ssh-add
SSH to the compute node with the -A option and then to the VM using the management IP obtained above. So if the compute node name is bony-alley.cord.lab and the management IP is 172.27.0.2:
vagrant@head1:~$ ssh -A ubuntu@bony-alley.cord.lab ubuntu@bony-alley:~$ ssh ubuntu@172.27.0.2 # Now you're inside the mysite-vsg-1 VM ubuntu@mysite-vsg-1:~$
MAAS GUI
You can access the MAAS (Metal-as-a-Service) GUI by pointing your browser to the URL http://<target-server>:8080/MAAS/. E.g., if you are running on CloudLab, your <target-server> is the hostname of your CloudLab node. The username is cord and the auto-generated password is found in ~/cord/build/maas/passwords/maas_user.txt on the CiaB server. For more information on MAAS, see the MAAS documentation.
XOS GUI
You can access the XOS GUI by pointing your browser to URL http://<target-server>:8080/xos/. The username is xosadmin@opencord.org and the auto-generated password is found in /opt/credentials/xosadmin@opencord.org on the head node.
The state of the system is that all CORD services have been onboarded to XOS. You can see them in the Service Graph represented in the Home page. If you want to see more details about the services you navigate to Core > Services, or searching for Service in the top bar (you start searching just pressing f)
A sample CORD subscriber has also been created. You can see the Service Graph for subscribers by selecting the Service Graph item in the left navigation.
Here is a sample output: 
NOTE: the
Service Graphwill need to be detangled. You can organize the nodes by dragging them around.
Kibana log viewing GUI
The Kibana web interface to the ElasticStack log aggregation system can be found at: http://<target-server>:8080/kibana/.
On initial login, you will be asked to create an index for the logstash-* files - do this and then access the main logging interface under Discover. More information on using Kibana can be be found in its documentation.
Test Results
After CORD-in-a-Box was set up, a couple of basic health tests were executed on the platform. The results of these tests can be found near the end of ~/build.out.
test-vsg
This tests the E2E connectivity of the POD by performing the following steps:
- Sets up a sample CORD subscriber in XOS
- Launches a vSG for that subscriber on the CORD POD
- Creates a test client, corresponding to a device in the subscriber's household
- Connects the test client to the vSG using a simulated OLT
- Runs
pingin the client to a public IP address in the Internet
Success means that traffic is flowing between the subscriber household and the Internet via the vSG. If it succeeded, you should see some lines like these in the output:
TASK [test-vsg : Output from ping test] ****************************************
Thursday 27 October 2016 15:29:17 +0000 (0:00:03.144) 0:19:21.336 ******
ok: [10.100.198.201] => {
"pingtest.stdout_lines": [
"PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.",
"64 bytes from 8.8.8.8: icmp_seq=1 ttl=47 time=29.7 ms",
"64 bytes from 8.8.8.8: icmp_seq=2 ttl=47 time=29.2 ms",
"64 bytes from 8.8.8.8: icmp_seq=3 ttl=47 time=29.1 ms",
"",
"--- 8.8.8.8 ping statistics ---",
"3 packets transmitted, 3 received, 0% packet loss, time 2003ms",
"rtt min/avg/max/mdev = 29.176/29.367/29.711/0.243 ms"
]
}
test-exampleservice
This test builds on test-vsg by loading the exampleservice described in the Tutorial on Assembling and On-Boarding Services. The purpose of the exampleservice is to demonstrate how new subscriber-facing services can be easily deployed to a CORD POD. This test performs the following steps:
- On-boards exampleservice into the CORD POD
- Creates an exampleservice tenant, which causes a VM to be created and Apache to be loaded and configured inside
- Runs a
curlfrom the subscriber test client, through the vSG, to the Apache server.
Success means that the Apache server launched by the exampleservice tenant is fully configured and is reachable from the subscriber client via the vSG. If it succeeded, you should see some lines like these in the output:
TASK [test-exampleservice : Output from curl test] *****************************
Thursday 27 October 2016 15:34:40 +0000 (0:00:01.116) 0:24:44.732 ******
ok: [10.100.198.201] => {
"curltest.stdout_lines": [
"",
"",
"",
"ExampleService",
" Service Message: \"hello\"",
" Tenant Message: \"world\""
]
}
Troubleshooting
If the CiaB build fails, you may try simply resuming the build at the place that failed. The easiest way is to do is to re-run the make build command; it will skip over the steps that have already completed.
If you need to force make build to re-run steps that have already completed, remove the appropriate file in the milestones directory prior to re-running.
For more information about how the build works, see the build internals guide.
Congratulations
If you got this far, you successfully built, deployed, and tested your first (virtual) CORD POD.
You are now ready to bring up a multi-node POD with a real switching fabric and multiple physical compute nodes. The process for doing so is described in the Physical POD Guide.