update the quick start guides and add an onos image to the fetch
Change-Id: I1a374c5a96ebadfe18b157d369c5b201b5fceea4
diff --git a/config/sample.yml b/config/sample.yml
new file mode 100644
index 0000000..7ae0372
--- /dev/null
+++ b/config/sample.yml
@@ -0,0 +1,70 @@
+# Deployment configuration for a phyical hardware POD
+---
+seedServer:
+ # IP address of the head node
+ ip: '10.90.0.2'
+
+ # If the head node is being accessed via a tunnel or reponds to SSH on a non-
+ # standard port, the port value should be set.
+ # port: '2022'
+
+ # User name and password used by Ansible to connect to the host for remote
+ # provisioning
+ user: 'ubuntu'
+ password: 'ubuntu'
+
+ # Network address information for the head node:
+ #
+ # fabric_ip - the IP address and mask bits to be used to configure the network
+ # interface connected to the leaf - spine fabric
+ #
+ # management_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node to the POD internal
+ # management network. The head node will deliver DHCP addresses to
+ # the other compute nodes over this interface
+ #
+ # external_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node (and the POD) to the
+ # Internet. All traffic in the POD to external hosts will be
+ # NAT-ed through this interface
+ # management_iface - the name of the interface that connects the head node to the POD
+ # internal network.
+ # external_iface - the name of the interface that connects the head node to the
+ # Internet
+ # management_network - the network and mask bits to used for hosts on the management
+ # network
+ fabric_ip: '10.6.1.1/24'
+ management_ip: '10.6.0.1/24'
+ external_ip: '47.135.132.21/24'
+ #management_iface: 'eth3'
+ #external_iface: 'eth2'
+ management_network: 10.1.0.0/24
+
+ # the skipTags options allow various part of the deployment to be skipped
+ # switch_support - does not deploy switch boot images to the PXE server
+ #
+ # reboot - will not reboot the head node after updating its network configuration
+ # this may mean the network configuration will not take effect, but will
+ # also prevent you from being locked out of the server if there is a
+ # network configuration error.
+ #
+ # interface_config - will not modify the network configuration of the head node,
+ # including the consistent naming of the network interfaces
+ skipTags:
+ # - 'switch_support'
+ # - 'reboot'
+ # - 'interface_config'
+
+docker:
+ imageVersion: candidate
+
+otherNodes:
+ # Experimental
+ #
+ # Specifies the subnet and address range that will be used to allocate IP addresses
+ # to the compute nodes as they are deployed into the POD.
+ fabric:
+ network: 10.1.1.1/24
+ management: 10.1.0.0/24
+ range_low: 10.1.1.2
+ range_high: 10.6.1.253