[CORD-2463]
Make box used by Vagrant VM's a parameter
Change-Id: I19437de9126146a4e102b6db3288e6ae73b1354a
diff --git a/scenarios/preppedpod/Vagrantfile b/scenarios/preppedpod/Vagrantfile
new file mode 100644
index 0000000..99f97e2
--- /dev/null
+++ b/scenarios/preppedpod/Vagrantfile
@@ -0,0 +1,68 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+#
+# opencloud Vagrantfile
+
+require 'yaml'
+settings = YAML.load_file('genconfig/config.yml')
+
+Vagrant.configure(2) do |config|
+
+ config.vm.box = settings["vagrant_box"]
+
+ config.vm.define "head1" do |h|
+ h.vm.hostname = "head1"
+ h.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: '*'
+ h.vm.provider :libvirt do |v|
+ v.memory = settings['head_vm_mem']
+ v.cpus = settings['head_vm_cpu']
+ v.machine_virtual_size = 100
+ v.management_network_name = settings['vm_public_network_name'] # public network
+ v.management_network_address = settings['vm_public_network_cidr']
+ end
+ h.vm.network "private_network", # management network, eth1
+ ip: "0.1.1.0", # not used, ignore
+ auto_config: false,
+ libvirt__network_name: settings['vm_management_network_name'],
+ libvirt__forward_mode: "none",
+ libvirt__dhcp_enabled: false
+ end
+
+ config.vm.define "compute1" do |c|
+ c.vm.hostname = "compute1"
+ c.vm.provider :libvirt do |v|
+ v.memory = settings['compute_vm_mem']
+ v.cpus = settings['compute_vm_cpu']
+ v.machine_virtual_size = 50
+ v.nested = true
+ v.management_network_name = settings['vm_public_network_name'] # public network
+ v.management_network_address = settings['vm_public_network_cidr']
+ end
+ c.vm.network "private_network", # management network, eth1
+ ip: "0.1.1.0",
+ auto_config: false,
+ libvirt__network_name: settings['vm_management_network_name'],
+ libvirt__forward_mode: "none",
+ libvirt__dhcp_enabled: false
+ end
+
+ config.vm.define "compute2" do |c|
+ c.vm.hostname = "compute2"
+ c.vm.provider :libvirt do |v|
+ v.memory = settings['compute_vm_mem']
+ v.cpus = settings['compute_vm_cpu']
+ v.machine_virtual_size = 50
+ v.nested = true
+ v.management_network_name = settings['vm_public_network_name'] # public network
+ v.management_network_address = settings['vm_public_network_cidr']
+ end
+ c.vm.network "private_network", # management network, eth1
+ ip: "0.1.1.0",
+ auto_config: false,
+ libvirt__network_name: settings['vm_management_network_name'],
+ libvirt__forward_mode: "none",
+ libvirt__dhcp_enabled: false
+ end
+
+end
+
diff --git a/scenarios/preppedpod/config.yml b/scenarios/preppedpod/config.yml
new file mode 100644
index 0000000..14d06ad
--- /dev/null
+++ b/scenarios/preppedpod/config.yml
@@ -0,0 +1,129 @@
+---
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# preppedpod Scenario - install CORD on prepared systems with OS installed
+# Only used with a virtual install, physical does not use VMs
+
+# opencloud profile config
+frontend_only: False
+
+# create a cord_profile dir next to the cord checkout
+config_cord_dir: "{{ ( playbook_dir ~ '/../..' ) | realpath }}"
+config_cord_profile_dir: "{{ ( playbook_dir ~ '/../../../cord_profile' ) | realpath }}"
+
+build_cord_dir: /opt/cord
+
+buildnode: head1
+headnode: head1
+
+# Make build config
+build_targets:
+ - onos-debug
+ - onboard-openstack
+
+vagrant_up_prereqs:
+ - prereqs-check
+
+# Copy cord and config to physical/virtual nodes
+cord_config_prereqs:
+ - vagrant-ssh-install
+ - copy-cord
+
+prep_buildnode_prereqs:
+ - copy-cord
+ - copy-config
+
+# Run build prep before head prep, when build == head
+prep_headnode_prereqs:
+ - prep-buildnode
+
+# Wait until headnode prepped before building containers, for consistent DNS
+docker_images_prereqs:
+ - prep-headnode
+
+# Start elasticstack before XOS/ONOS, which log to it
+#start_xos_prereqs:
+# - deploy-elasticstack
+#
+#deploy_onos_prereqs:
+# - deploy-elasticstack
+
+# node topology, used to bring up management interfaces
+physical_node_list:
+ - name: head1
+ ipv4_last_octet: 1
+ aliases:
+ - head
+ - name: compute1
+ ipv4_last_octet: 250
+ - name: compute2
+ ipv4_last_octet: 251
+
+# Vagrant VM configuration
+vagrant_vms:
+ - head1
+ - compute1
+ - compute2
+
+# Vagrant VM configuration
+vagrant_box: "ubuntu/trusty64"
+head_vm_mem: 16384
+head_vm_cpu: 8
+
+compute_vm_mem: 16384
+compute_vm_cpu: 8
+
+vm_management_network_name: cordmgmt
+vm_public_network_name: cordpub
+vm_public_network_cidr: "10.230.100.0/24"
+
+# images for imagebuilder to build/pull (tagged elsewhere)
+docker_image_whitelist:
+ - "xosproject/xos-base"
+ - "xosproject/xos"
+ - "xosproject/xos-client"
+ - "xosproject/xos-corebuilder"
+ - "xosproject/xos-gui"
+ - "xosproject/xos-gui-builder"
+ - "xosproject/xos-libraries"
+ - "xosproject/xos-postgres"
+ - "xosproject/xos-tosca"
+ - "xosproject/xos-ws"
+ - "xosproject/chameleon"
+ - "xosproject/xos-synchronizer-base"
+ - "gliderlabs/consul-server"
+ - "gliderlabs/registrator"
+ - "nginx"
+ - "onosproject/onos"
+ - "redis"
+ - "node"
+
+# Ansible Inventory
+inventory_groups:
+
+ config:
+ localhost:
+ ansible_connection: local
+
+ build:
+ head1:
+
+ head:
+ head1:
+
+ compute:
+ compute1:
+ compute2:
+