[CORD-2466]
Create a multi-node k8s-compatible scenario
Change-Id: I618a66323672d646847e438f1e0c320962e75642
diff --git a/scenarios/controlkube/Vagrantfile b/scenarios/controlkube/Vagrantfile
new file mode 100644
index 0000000..3686e76
--- /dev/null
+++ b/scenarios/controlkube/Vagrantfile
@@ -0,0 +1,77 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+#
+# controlkube Scenario Vagrantfile
+
+require 'yaml'
+settings = YAML.load_file('genconfig/config.yml')
+
+Vagrant.configure("2") do |config|
+
+ config.vm.box = settings["vagrant_box"]
+
+ config.vm.synced_folder '.', '/vagrant', disabled: true
+
+ # set the headnode VM
+ config.vm.define "head1" do |h|
+ h.vm.hostname = "head1"
+ h.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: '0.0.0.0'
+ h.vm.provider :virtualbox do |vb|
+ vb.memory = settings['head_vm_mem']
+ vb.cpus = settings['head_vm_cpu']
+ vb.linked_clone = true
+ end
+ h.vm.provider :libvirt do |v, override|
+ v.memory = settings['head_vm_mem']
+ v.cpus = settings['head_vm_cpu']
+ end
+ h.vm.network "private_network", # management network, eth1
+ ip: "0.1.1.0", # unused IP address (setting required)
+ auto_config: false,
+ virtualbox__intnet: settings['vm_management_network_name'],
+ libvirt__network_name: settings['vm_management_network_name'],
+ libvirt__forward_mode: "none",
+ libvirt__dhcp_enabled: false
+ end
+
+ config.vm.define "compute1" do |c|
+ c.vm.hostname = "compute1"
+ c.vm.provider :virtualbox do |vb|
+ vb.memory = settings['compute_vm_mem']
+ vb.cpus = settings['compute_vm_cpu']
+ vb.linked_clone = true
+ end
+ c.vm.provider :libvirt do |v|
+ v.memory = settings['compute_vm_mem']
+ v.cpus = settings['compute_vm_cpu']
+ end
+ c.vm.network "private_network", # management network, eth1
+ ip: "0.1.1.0", # unused IP address (setting required)
+ auto_config: false,
+ virtualbox__intnet: settings['vm_management_network_name'],
+ libvirt__network_name: settings['vm_management_network_name'],
+ libvirt__forward_mode: "none",
+ libvirt__dhcp_enabled: false
+ end
+
+ config.vm.define "compute2" do |c|
+ c.vm.hostname = "compute2"
+ c.vm.provider :virtualbox do |vb|
+ vb.memory = settings['compute_vm_mem']
+ vb.cpus = settings['compute_vm_cpu']
+ vb.linked_clone = true
+ end
+ c.vm.provider :libvirt do |v|
+ v.memory = settings['compute_vm_mem']
+ v.cpus = settings['compute_vm_cpu']
+ end
+ c.vm.network "private_network", # management network, eth1
+ ip: "0.1.1.0", # unused IP address (setting required)
+ auto_config: false,
+ virtualbox__intnet: settings['vm_management_network_name'],
+ libvirt__network_name: settings['vm_management_network_name'],
+ libvirt__forward_mode: "none",
+ libvirt__dhcp_enabled: false
+ end
+end
+
diff --git a/scenarios/controlkube/config.yml b/scenarios/controlkube/config.yml
new file mode 100644
index 0000000..a277318
--- /dev/null
+++ b/scenarios/controlkube/config.yml
@@ -0,0 +1,127 @@
+---
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# controlkube Scenario - installs XOS/ONOS on kubernetes, similar to controlpod
+
+frontend_only: False
+use_maas: False
+
+# create a cord_profile dir next to the cord checkout
+config_cord_dir: "{{ ( playbook_dir ~ '/../..' ) | realpath }}"
+config_cord_profile_dir: "{{ ( playbook_dir ~ '/../../../cord_profile' ) | realpath }}"
+
+build_cord_dir: /opt/cord
+
+buildnode: head1
+headnode: head1
+
+# Make build config
+build_targets:
+ - deploy-kubespray
+# - prep-computenode
+# - prep-headnode
+# - core-image
+
+config_ssh_key_prereqs:
+ - vagrant-ssh-install
+
+copy_cord_prereqs:
+ - vagrant-ssh-install
+
+cord_config_prereqs:
+ - vagrant-ssh-install
+ - copy-cord
+
+prep_buildnode_prereqs:
+ - copy-cord
+ - copy-config
+
+# Run build prep before head prep, when build == head
+prep_headnode_prereqs:
+ - prep-buildnode
+
+# Wait until headnode prepped before building containers, for consistent DNS
+docker_images_prereqs:
+ - prep-headnode
+
+# node topology, used to bring up management interfaces
+physical_node_list:
+ - name: head1
+ ipv4_last_octet: 1
+ aliases:
+ - head
+ - name: compute1
+ ipv4_last_octet: 17
+ - name: compute2
+ ipv4_last_octet: 18
+
+# Vagrant VM configuration
+vagrant_vms:
+ - head1
+ - compute1
+ - compute2
+
+# Vagrant VM configuration
+vagrant_box: "bento/ubuntu-16.04"
+
+head_vm_mem: 2048
+head_vm_cpu: 4
+
+compute_vm_mem: 2048
+compute_vm_cpu: 4
+
+vm_management_network_name: cordmgmt
+vm_public_network_name: cordpub
+vm_public_network_cidr: "10.230.100.0/24"
+
+# images for imagebuilder to build/pull (tagged elsewhere)
+docker_image_whitelist:
+ - "xosproject/xos-base"
+ - "xosproject/xos"
+ - "xosproject/xos-client"
+ - "xosproject/xos-corebuilder"
+ - "xosproject/xos-gui"
+ - "xosproject/xos-gui-builder"
+ - "xosproject/xos-libraries"
+ - "xosproject/xos-postgres"
+ - "xosproject/xos-tosca"
+ - "xosproject/xos-ws"
+ - "xosproject/chameleon"
+ - "xosproject/xos-synchronizer-base"
+ - "gliderlabs/consul-server"
+ - "gliderlabs/registrator"
+ - "nginx"
+ - "onosproject/onos"
+ - "redis"
+ - "node"
+ - "sebp/elk"
+
+# Ansible Inventory
+inventory_groups:
+
+ config:
+ localhost:
+ ansible_connection: local
+
+ build:
+ head1:
+
+ head:
+ head1:
+
+ compute:
+ compute1:
+ compute2:
+
diff --git a/scenarios/preppedpod/config.yml b/scenarios/preppedpod/config.yml
index 9e570c4..12967f9 100644
--- a/scenarios/preppedpod/config.yml
+++ b/scenarios/preppedpod/config.yml
@@ -16,8 +16,8 @@
# preppedpod Scenario - install CORD on prepared systems with OS installed
# Only used with a virtual install, physical does not use VMs
-# opencloud profile config
frontend_only: False
+use_maas: False
# create a cord_profile dir next to the cord checkout
config_cord_dir: "{{ ( playbook_dir ~ '/../..' ) | realpath }}"
@@ -36,7 +36,12 @@
vagrant_up_prereqs:
- prereqs-check
-# Copy cord and config to physical/virtual nodes
+config_ssh_key_prereqs:
+ - vagrant-ssh-install
+
+copy_cord_prereqs:
+ - vagrant-ssh-install
+
cord_config_prereqs:
- vagrant-ssh-install
- copy-cord