blob: ee8e7499c66693d065c35b46fda1790b60976bf4 [file] [log] [blame]
David K. Bainbridged54ca702016-07-13 22:27:12 -07001# Deployment configuration for a phyical hardware POD
2---
3seedServer:
4 # IP address of the head node
5 ip: '10.90.0.2'
6
7 # If the head node is being accessed via a tunnel or reponds to SSH on a non-
8 # standard port, the port value should be set.
9 # port: '2022'
10
11 # User name and password used by Ansible to connect to the host for remote
12 # provisioning
13 user: 'ubuntu'
14 password: 'ubuntu'
15
16 # Network address information for the head node:
17 #
18 # fabric_ip - the IP address and mask bits to be used to configure the network
19 # interface connected to the leaf - spine fabric
20 #
21 # management_ip - the IP address and mask bits to be used to configure the network
22 # interface connecting the head node to the POD internal
23 # management network. The head node will deliver DHCP addresses to
24 # the other compute nodes over this interface
25 #
26 # external_ip - the IP address and mask bits to be used to configure the network
27 # interface connecting the head node (and the POD) to the
28 # Internet. All traffic in the POD to external hosts will be
29 # NAT-ed through this interface
David K. Bainbridged54ca702016-07-13 22:27:12 -070030 # external_iface - the name of the interface that connects the head node to the
31 # Internet
32 # management_network - the network and mask bits to used for hosts on the management
33 # network
34 fabric_ip: '10.6.1.1/24'
David K. Bainbridge1705b812016-10-27 11:00:04 -070035 #fabric_range_low: '10.6.1.2'
36 #fabric_range_high: '10.6.1.100'
David K. Bainbridged54ca702016-07-13 22:27:12 -070037 management_ip: '10.6.0.1/24'
38 external_ip: '47.135.132.21/24'
David K. Bainbridged54ca702016-07-13 22:27:12 -070039 #external_iface: 'eth2'
Murat Parlakisikb7a6bf32016-08-24 06:52:28 -070040 management_network: 10.6.0.0/24
David K. Bainbridged54ca702016-07-13 22:27:12 -070041
42 # the skipTags options allow various part of the deployment to be skipped
43 # switch_support - does not deploy switch boot images to the PXE server
44 #
45 # reboot - will not reboot the head node after updating its network configuration
46 # this may mean the network configuration will not take effect, but will
David K. Bainbridge53e623f2016-10-04 21:11:37 -070047 # also prevent you from being locked out of the server if there is a
David K. Bainbridged54ca702016-07-13 22:27:12 -070048 # network configuration error.
49 #
50 # interface_config - will not modify the network configuration of the head node,
51 # including the consistent naming of the network interfaces
52 skipTags:
53 # - 'switch_support'
54 # - 'reboot'
55 # - 'interface_config'
56
David K. Bainbridge53e623f2016-10-04 21:11:37 -070057 # The following variable settings can be used to customize how the network interfaces
58 # are selected into the fabric and management bridge interface or ignored/excluded.
59 # See the documentation docs/quickstart_physical.md for more information about how
60 # to set these variables.
61 extraVars:
62 # - 'fabric_include_names=<name1>,<name2>,...'
63 # - 'fabric_include_module_types=<mtype1>,<mtype2>,...'
64 # - 'fabric_include_bus_types=<btype1>,<btype2>,...'
65 # - 'fabric_exclude_names=<name1>,<name2>,...'
66 # - 'fabric_exclude_module_types=<mtype1>,<mtype2>,...'
67 # - 'fabric_exclude_bus_types=<btype1>,<btype2>,...'
68 # - 'fabric_ignore_names=<name1>,<name2>,...'
69 # - 'fabric_ignore_module_types=<mtype1>,<mtype2>,...'
70 # - 'fabric_ignore_bus_types=<btype1>,<btype2>,...'
71 # - 'management_include_names=<name1>,<name2>,...'
72 # - 'management_include_module_types=<mtype1>,<mtype2>,...'
73 # - 'management_include_bus_types=<btype1>,<btype2>,...'
74 # - 'management_exclude_names=<name1>,<name2>,...'
75 # - 'management_exclude_module_types=<mtype1>,<mtype2>,...'
76 # - 'management_exclude_bus_types=<btype1>,<btype2>,...'
77 # - 'management_ignore_names=<name1>,<name2>,...'
78 # - 'management_ignore_module_types=<mtype1>,<mtype2>,...'
79 # - 'management_ignore_bus_types=<btype1>,<btype2>,...'
David K. Bainbridge1705b812016-10-27 11:00:04 -070080 # - ubuntu_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/archive.ubuntu.com/ubuntu trusty main universe"
81 # - ubuntu_updates_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/archive.ubuntu.com/ubuntu trusty-updates main universe"
82 # - docker_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/apt.dockerproject.org/repo ubuntu-trusty main"
83 # - java_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/ppa.launchpad.net/webupd8team/java/ubuntu trusty main"
84 # - ansible_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/ppa.launchpad.net/ansible/ansible/ubuntu trusty main"
85 # - maas_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/ppa.launchpad.net/maas/stable/ubuntu trusty main"
86 # - dell_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/linux.dell.com/repo/community trusty openmanage"
87 # - juju_apt_repo="deb [arch=amd64] http://10.1.0.1:8889/mirror/ppa.launchpad.net/juju/stable/ubuntu trusty main"
David K. Bainbridge53e623f2016-10-04 21:11:37 -070088
David K. Bainbridged54ca702016-07-13 22:27:12 -070089docker:
90 imageVersion: candidate