Managing a device

The first API that a NEM would need to excute to start managing a hardware is the StartManagingDevice.

StartManagingDevice

service NativeHWManagementService {
    // Initializes context for a device and sets up required states
    // In the call to StartManagingDevice, the fields of ModifiableComponent which are relevant
    // and their meanings in this context is mentioned below:
    // name = The unique name that needs to be assigned to this hardware;
    // class = COMPONENT_TYPE_UNDEFINED;
    // parent = nil;
    // alias = Optional;
    // asset_id = Optional;
    // uri = IP Address of the Hardware;
    rpc StartManagingDevice(ModifiableComponent) returns(stream StartManagingDeviceResponse);
}

The uri is what would carry the IP address of the device and the name should be something that would uniquely identify the device.

On reception of this rpc, an implementation of Device Manager should validate the IP address and see if it can talk to/setup connection to the device or not. It should setup any required states that might be needed for it's internal implementation.

The NEM would wait for the StartManagingDeviceResponse before it will do any futher actions on this device. This response needs to contain the uuid assigned to this device. For futher RPCs it would be the uuid that would be used to identify the device.

The device manager implementation should ensure that the uuid returned is universally unique and does not change across reboots of the device. An example could be that the device manager first connects to the device and learns the serial number of the device and then uses this serial number to generate the uuid for the device.

StopManagingDevice

// Stop management of a device and clean up any context caches for that device
rpc StopManagingDevice(StopManagingDeviceRequest) returns(StopManagingDeviceResponse);

This RPC is to be used when a device is to be released from the system and no longer needs to be managed.

GetPhysicalInventory

// Get the HW inventory details of the Device
rpc GetPhysicalInventory(PhysicalInventoryRequest) returns(stream PhysicalInventoryResponse);

This RPC is used to retrieve the entire inventory of components of the Hardware. Again the caller has to wait on the response in a stream as implementations of Device Manager could take time to gather all this information.

GetHWComponentInfo

// Get the details of a particular HW component
rpc GetHWComponentInfo(HWComponentInfoGetRequest) returns(stream Component);

In the call to this RPC, both the name and the uuid of the component need to be passed in the HWComponentInfoGetRequest.

The name has to be unique for each of the components of the hardware and the uuid has to be universally unique. Implementation of Device Manager need to ensure this. Both of these two attributes are generated by the Device Manager.

SetHWComponentInfo

// Sets the permissible attributes of a HW component
rpc SetHWComponentInfo(HWComponentInfoSetRequest) returns(HWComponentInfoSetResponse);

In the call to this RPC, both the name and the uuid of the component need to be passed in the HWComponentInfoSetRequest.

Using this RPC, it is possible to modify the name of a component, and the Device Manager has to ensure that the name is unique, else it should return an error for this RPC. Although the name can be modified, it is recommended that NEM implementations do not do this because Device Managers and take advantage of this and come up with efficient implementations.

HeartbeatCheck

// Performs the heartbeat check
rpc HeartbeatCheck(google.protobuf.Empty) returns (Heartbeat);

This RPC is used to perform the hearbeat check for the connectivity. When the gRPC server streaming is used for conveying the Events and Metrics to external systems, on the connectivity break and reestablishment, the server streaming RPCs need to be established again.

RebootDevice

// Performs the reboot of the device
rpc RebootDevice(RebootDeviceRequest) returns (RebootDeviceResponse);

This RPC is used to administratively reboot the device. The server side implementations should reboot the device only after successfully returning this RPC.

Port Speed configuration

The Device Management Interface does not support runtime NNI (network to network interface) port speed configuration on the OLT device. The speed of the NNI ports is configured, for each port, at startup time through the startup configuration file that can be provided via the UpdateStartupConfiguration API. If a change to the NNI port speed is needed a new startup configuration will be sent to the DM implementation for that OLT via the UpdateStartupConfiguration API. The new configuration will then be applied by the DM to the OLT. This may include a reboot of the OLT.

Operators currently do not require runtime configuration of the NNI because it's not an element that is expected to change at all once initial deployment is performed.