// Copyright 2018 Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

At the root of the device-management source tree
1. cd demotest
   make demotest
   ./demotest
2. Create another ssh session
   cd ./demotest/cmd_cleint
   make cmd_cl
   ./cmd_cl

   then it will have "CMD to send:" prompt
   You can use the following "client cmd" to test.

   Example:

   For the first time, you need to use "attach:ipaddress:port:vendorname:freq" to set the device's IP related info.
   If successful, you will get "[ipaddress:port]CMD to send:" prompt to indicate what device you attached now. 
   This attach will subscribe default 3 types events into the server.  
   You can use the following wget to check if any events subscriptions on the device.

   wget --no-check-certificate  \
   -qO- https://RFSERVERIP:8888/redfish/v1/EventService/Subscriptions/ \
   | python -m json.tool

   You can also use "unsub:add:rm:alert" to unsubscribe all 3 types of event subscriptions on the device.

   And use "QUIT" to leave test.

--------------------------------------------------------------------------------------
Test items								client cmd
--------------------------------------------------------------------------------------
set device info								Example:

Set IP 192.168.4.27 port 8888 vendor "edgecore" freq 180
									attach:192.168.4.27:8888:edgecore:180
--------------------------------------------------------------------------------------
set multi-device info                                                  Example:

									attach:192.168.4.27:8888:edgecore:180
									attach:192.168.3.34:8888:edgecore:180
--------------------------------------------------------------------------------------
Get Current List of Devices monitored					showdevices
									Return from server: 192.168.4.26:8888,192.168.4.27:8888
--------------------------------------------------------------------------------------
UnSubscribe all events(ResourceAdded/ResourceRemoved/Alert)		unsub:192.168.4.27:8888:add:rm:alert
--------------------------------------------------------------------------------------
Subscribe all events(ResourceAdded/ResourceRemoved/Alert) 		sub:192.168.4.27:8888:add:rm:alert
--------------------------------------------------------------------------------------
Subscribe and unsubscribe an event					Example:	

Subscribe ResourceAdded event 						sub:192.168.4.27:8888:add
Subscribe ResourceRemoved event						sub:192.168.4.27:8888:rm
Subscribe Alert event							sub:192.168.4.27:8888:alert
Unsubscribe ResourceAdded event						unsub:192.168.4.27:8888:add
Unsubscribe ResourceRemoved event					unsub:192.168.4.27:8888:rm
Unsubscribe Alert event							unsub:192.168.4.27:8888:alert
--------------------------------------------------------------------------------------
Subscribe and unsubscribe multiple events, out of order			Use the above commands to do test.
--------------------------------------------------------------------------------------
Subscribe an unsupported event						sub:192.168.4.27:8888:update
--------------------------------------------------------------------------------------
Subscribe to an already subscribed event				Example:

									sub:192.168.4.27:8888:add
									sub:192.168.4.27:8888:add
--------------------------------------------------------------------------------------
Unsubscribe  an unsupported event					unsub:192.168.4.27:8888:update
--------------------------------------------------------------------------------------
Unsubscribe a supported but not-subscribed event			Example:

									unsub:192.168.4.27:8888:add:rm:alert
									unsub:192.168.4.27:8888:add
									unsub:192.168.4.27:8888:rm
									unsub:192.168.4.27:8888:alert
--------------------------------------------------------------------------------------
Change polling interval 						Example: 

Set frequecny to 30 seconds
									period:192.168.4.27:8888:30
--------------------------------------------------------------------------------------
Show support event list vendor						showeventlist:edgecore
-----------------------------------------------------------------------------------------------
Show current events subscribed by device                               showdeviceeventlist:192.168.4.27:8888
------------------------------------------------------------------------------------------------------------ 
Clear all current events subscribed by device                          cleardeviceeventlist:192.168.4.27:8888
-------------------------------------------------------------------------------------------------------------
* During and after each test, verify the list of events subscribed	wget --no-check-certificate  \
									-qO- https://192.168.4.27:8888/redfish/v1/EventService/Subscriptions/ \
									| python -m json.tool
--------------------------------------------------------------------------------------