diff --git a/vendor/github.com/klauspost/compress/zstd/snappy.go b/vendor/github.com/klauspost/compress/zstd/snappy.go
new file mode 100644
index 0000000..a048818
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/zstd/snappy.go
@@ -0,0 +1,436 @@
+// Copyright 2019+ Klaus Post. All rights reserved.
+// License information can be found in the LICENSE file.
+// Based on work by Yann Collet, released under BSD License.
+
+package zstd
+
+import (
+	"encoding/binary"
+	"errors"
+	"hash/crc32"
+	"io"
+
+	"github.com/klauspost/compress/huff0"
+	"github.com/klauspost/compress/snappy"
+)
+
+const (
+	snappyTagLiteral = 0x00
+	snappyTagCopy1   = 0x01
+	snappyTagCopy2   = 0x02
+	snappyTagCopy4   = 0x03
+)
+
+const (
+	snappyChecksumSize = 4
+	snappyMagicBody    = "sNaPpY"
+
+	// snappyMaxBlockSize is the maximum size of the input to encodeBlock. It is not
+	// part of the wire format per se, but some parts of the encoder assume
+	// that an offset fits into a uint16.
+	//
+	// Also, for the framing format (Writer type instead of Encode function),
+	// https://github.com/google/snappy/blob/master/framing_format.txt says
+	// that "the uncompressed data in a chunk must be no longer than 65536
+	// bytes".
+	snappyMaxBlockSize = 65536
+
+	// snappyMaxEncodedLenOfMaxBlockSize equals MaxEncodedLen(snappyMaxBlockSize), but is
+	// hard coded to be a const instead of a variable, so that obufLen can also
+	// be a const. Their equivalence is confirmed by
+	// TestMaxEncodedLenOfMaxBlockSize.
+	snappyMaxEncodedLenOfMaxBlockSize = 76490
+)
+
+const (
+	chunkTypeCompressedData   = 0x00
+	chunkTypeUncompressedData = 0x01
+	chunkTypePadding          = 0xfe
+	chunkTypeStreamIdentifier = 0xff
+)
+
+var (
+	// ErrSnappyCorrupt reports that the input is invalid.
+	ErrSnappyCorrupt = errors.New("snappy: corrupt input")
+	// ErrSnappyTooLarge reports that the uncompressed length is too large.
+	ErrSnappyTooLarge = errors.New("snappy: decoded block is too large")
+	// ErrSnappyUnsupported reports that the input isn't supported.
+	ErrSnappyUnsupported = errors.New("snappy: unsupported input")
+
+	errUnsupportedLiteralLength = errors.New("snappy: unsupported literal length")
+)
+
+// SnappyConverter can read SnappyConverter-compressed streams and convert them to zstd.
+// Conversion is done by converting the stream directly from Snappy without intermediate
+// full decoding.
+// Therefore the compression ratio is much less than what can be done by a full decompression
+// and compression, and a faulty Snappy stream may lead to a faulty Zstandard stream without
+// any errors being generated.
+// No CRC value is being generated and not all CRC values of the Snappy stream are checked.
+// However, it provides really fast recompression of Snappy streams.
+// The converter can be reused to avoid allocations, even after errors.
+type SnappyConverter struct {
+	r     io.Reader
+	err   error
+	buf   []byte
+	block *blockEnc
+}
+
+// Convert the Snappy stream supplied in 'in' and write the zStandard stream to 'w'.
+// If any error is detected on the Snappy stream it is returned.
+// The number of bytes written is returned.
+func (r *SnappyConverter) Convert(in io.Reader, w io.Writer) (int64, error) {
+	initPredefined()
+	r.err = nil
+	r.r = in
+	if r.block == nil {
+		r.block = &blockEnc{}
+		r.block.init()
+	}
+	r.block.initNewEncode()
+	if len(r.buf) != snappyMaxEncodedLenOfMaxBlockSize+snappyChecksumSize {
+		r.buf = make([]byte, snappyMaxEncodedLenOfMaxBlockSize+snappyChecksumSize)
+	}
+	r.block.litEnc.Reuse = huff0.ReusePolicyNone
+	var written int64
+	var readHeader bool
+	{
+		var header []byte
+		var n int
+		header, r.err = frameHeader{WindowSize: snappyMaxBlockSize}.appendTo(r.buf[:0])
+
+		n, r.err = w.Write(header)
+		if r.err != nil {
+			return written, r.err
+		}
+		written += int64(n)
+	}
+
+	for {
+		if !r.readFull(r.buf[:4], true) {
+			// Add empty last block
+			r.block.reset(nil)
+			r.block.last = true
+			err := r.block.encodeLits()
+			if err != nil {
+				return written, err
+			}
+			n, err := w.Write(r.block.output)
+			if err != nil {
+				return written, err
+			}
+			written += int64(n)
+
+			return written, r.err
+		}
+		chunkType := r.buf[0]
+		if !readHeader {
+			if chunkType != chunkTypeStreamIdentifier {
+				println("chunkType != chunkTypeStreamIdentifier", chunkType)
+				r.err = ErrSnappyCorrupt
+				return written, r.err
+			}
+			readHeader = true
+		}
+		chunkLen := int(r.buf[1]) | int(r.buf[2])<<8 | int(r.buf[3])<<16
+		if chunkLen > len(r.buf) {
+			println("chunkLen > len(r.buf)", chunkType)
+			r.err = ErrSnappyUnsupported
+			return written, r.err
+		}
+
+		// The chunk types are specified at
+		// https://github.com/google/snappy/blob/master/framing_format.txt
+		switch chunkType {
+		case chunkTypeCompressedData:
+			// Section 4.2. Compressed data (chunk type 0x00).
+			if chunkLen < snappyChecksumSize {
+				println("chunkLen < snappyChecksumSize", chunkLen, snappyChecksumSize)
+				r.err = ErrSnappyCorrupt
+				return written, r.err
+			}
+			buf := r.buf[:chunkLen]
+			if !r.readFull(buf, false) {
+				return written, r.err
+			}
+			//checksum := uint32(buf[0]) | uint32(buf[1])<<8 | uint32(buf[2])<<16 | uint32(buf[3])<<24
+			buf = buf[snappyChecksumSize:]
+
+			n, hdr, err := snappyDecodedLen(buf)
+			if err != nil {
+				r.err = err
+				return written, r.err
+			}
+			buf = buf[hdr:]
+			if n > snappyMaxBlockSize {
+				println("n > snappyMaxBlockSize", n, snappyMaxBlockSize)
+				r.err = ErrSnappyCorrupt
+				return written, r.err
+			}
+			r.block.reset(nil)
+			r.block.pushOffsets()
+			if err := decodeSnappy(r.block, buf); err != nil {
+				r.err = err
+				return written, r.err
+			}
+			if r.block.size+r.block.extraLits != n {
+				printf("invalid size, want %d, got %d\n", n, r.block.size+r.block.extraLits)
+				r.err = ErrSnappyCorrupt
+				return written, r.err
+			}
+			err = r.block.encode()
+			switch err {
+			case errIncompressible:
+				r.block.popOffsets()
+				r.block.reset(nil)
+				r.block.literals, err = snappy.Decode(r.block.literals[:n], r.buf[snappyChecksumSize:chunkLen])
+				if err != nil {
+					println("snappy.Decode:", err)
+					return written, err
+				}
+				err = r.block.encodeLits()
+				if err != nil {
+					return written, err
+				}
+			case nil:
+			default:
+				return written, err
+			}
+
+			n, r.err = w.Write(r.block.output)
+			if r.err != nil {
+				return written, err
+			}
+			written += int64(n)
+			continue
+		case chunkTypeUncompressedData:
+			if debug {
+				println("Uncompressed, chunklen", chunkLen)
+			}
+			// Section 4.3. Uncompressed data (chunk type 0x01).
+			if chunkLen < snappyChecksumSize {
+				println("chunkLen < snappyChecksumSize", chunkLen, snappyChecksumSize)
+				r.err = ErrSnappyCorrupt
+				return written, r.err
+			}
+			r.block.reset(nil)
+			buf := r.buf[:snappyChecksumSize]
+			if !r.readFull(buf, false) {
+				return written, r.err
+			}
+			checksum := uint32(buf[0]) | uint32(buf[1])<<8 | uint32(buf[2])<<16 | uint32(buf[3])<<24
+			// Read directly into r.decoded instead of via r.buf.
+			n := chunkLen - snappyChecksumSize
+			if n > snappyMaxBlockSize {
+				println("n > snappyMaxBlockSize", n, snappyMaxBlockSize)
+				r.err = ErrSnappyCorrupt
+				return written, r.err
+			}
+			r.block.literals = r.block.literals[:n]
+			if !r.readFull(r.block.literals, false) {
+				return written, r.err
+			}
+			if snappyCRC(r.block.literals) != checksum {
+				println("literals crc mismatch")
+				r.err = ErrSnappyCorrupt
+				return written, r.err
+			}
+			err := r.block.encodeLits()
+			if err != nil {
+				return written, err
+			}
+			n, r.err = w.Write(r.block.output)
+			if r.err != nil {
+				return written, err
+			}
+			written += int64(n)
+			continue
+
+		case chunkTypeStreamIdentifier:
+			if debug {
+				println("stream id", chunkLen, len(snappyMagicBody))
+			}
+			// Section 4.1. Stream identifier (chunk type 0xff).
+			if chunkLen != len(snappyMagicBody) {
+				println("chunkLen != len(snappyMagicBody)", chunkLen, len(snappyMagicBody))
+				r.err = ErrSnappyCorrupt
+				return written, r.err
+			}
+			if !r.readFull(r.buf[:len(snappyMagicBody)], false) {
+				return written, r.err
+			}
+			for i := 0; i < len(snappyMagicBody); i++ {
+				if r.buf[i] != snappyMagicBody[i] {
+					println("r.buf[i] != snappyMagicBody[i]", r.buf[i], snappyMagicBody[i], i)
+					r.err = ErrSnappyCorrupt
+					return written, r.err
+				}
+			}
+			continue
+		}
+
+		if chunkType <= 0x7f {
+			// Section 4.5. Reserved unskippable chunks (chunk types 0x02-0x7f).
+			println("chunkType <= 0x7f")
+			r.err = ErrSnappyUnsupported
+			return written, r.err
+		}
+		// Section 4.4 Padding (chunk type 0xfe).
+		// Section 4.6. Reserved skippable chunks (chunk types 0x80-0xfd).
+		if !r.readFull(r.buf[:chunkLen], false) {
+			return written, r.err
+		}
+	}
+}
+
+// decodeSnappy writes the decoding of src to dst. It assumes that the varint-encoded
+// length of the decompressed bytes has already been read.
+func decodeSnappy(blk *blockEnc, src []byte) error {
+	//decodeRef(make([]byte, snappyMaxBlockSize), src)
+	var s, length int
+	lits := blk.extraLits
+	var offset uint32
+	for s < len(src) {
+		switch src[s] & 0x03 {
+		case snappyTagLiteral:
+			x := uint32(src[s] >> 2)
+			switch {
+			case x < 60:
+				s++
+			case x == 60:
+				s += 2
+				if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+					println("uint(s) > uint(len(src)", s, src)
+					return ErrSnappyCorrupt
+				}
+				x = uint32(src[s-1])
+			case x == 61:
+				s += 3
+				if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+					println("uint(s) > uint(len(src)", s, src)
+					return ErrSnappyCorrupt
+				}
+				x = uint32(src[s-2]) | uint32(src[s-1])<<8
+			case x == 62:
+				s += 4
+				if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+					println("uint(s) > uint(len(src)", s, src)
+					return ErrSnappyCorrupt
+				}
+				x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16
+			case x == 63:
+				s += 5
+				if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+					println("uint(s) > uint(len(src)", s, src)
+					return ErrSnappyCorrupt
+				}
+				x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24
+			}
+			if x > snappyMaxBlockSize {
+				println("x > snappyMaxBlockSize", x, snappyMaxBlockSize)
+				return ErrSnappyCorrupt
+			}
+			length = int(x) + 1
+			if length <= 0 {
+				println("length <= 0 ", length)
+
+				return errUnsupportedLiteralLength
+			}
+			//if length > snappyMaxBlockSize-d || uint32(length) > len(src)-s {
+			//	return ErrSnappyCorrupt
+			//}
+
+			blk.literals = append(blk.literals, src[s:s+length]...)
+			//println(length, "litLen")
+			lits += length
+			s += length
+			continue
+
+		case snappyTagCopy1:
+			s += 2
+			if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+				println("uint(s) > uint(len(src)", s, len(src))
+				return ErrSnappyCorrupt
+			}
+			length = 4 + int(src[s-2])>>2&0x7
+			offset = uint32(src[s-2])&0xe0<<3 | uint32(src[s-1])
+
+		case snappyTagCopy2:
+			s += 3
+			if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+				println("uint(s) > uint(len(src)", s, len(src))
+				return ErrSnappyCorrupt
+			}
+			length = 1 + int(src[s-3])>>2
+			offset = uint32(src[s-2]) | uint32(src[s-1])<<8
+
+		case snappyTagCopy4:
+			s += 5
+			if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+				println("uint(s) > uint(len(src)", s, len(src))
+				return ErrSnappyCorrupt
+			}
+			length = 1 + int(src[s-5])>>2
+			offset = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24
+		}
+
+		if offset <= 0 || blk.size+lits < int(offset) /*|| length > len(blk)-d */ {
+			println("offset <= 0 || blk.size+lits < int(offset)", offset, blk.size+lits, int(offset), blk.size, lits)
+
+			return ErrSnappyCorrupt
+		}
+
+		// Check if offset is one of the recent offsets.
+		// Adjusts the output offset accordingly.
+		// Gives a tiny bit of compression, typically around 1%.
+		if false {
+			offset = blk.matchOffset(offset, uint32(lits))
+		} else {
+			offset += 3
+		}
+
+		blk.sequences = append(blk.sequences, seq{
+			litLen:   uint32(lits),
+			offset:   offset,
+			matchLen: uint32(length) - zstdMinMatch,
+		})
+		blk.size += length + lits
+		lits = 0
+	}
+	blk.extraLits = lits
+	return nil
+}
+
+func (r *SnappyConverter) readFull(p []byte, allowEOF bool) (ok bool) {
+	if _, r.err = io.ReadFull(r.r, p); r.err != nil {
+		if r.err == io.ErrUnexpectedEOF || (r.err == io.EOF && !allowEOF) {
+			r.err = ErrSnappyCorrupt
+		}
+		return false
+	}
+	return true
+}
+
+var crcTable = crc32.MakeTable(crc32.Castagnoli)
+
+// crc implements the checksum specified in section 3 of
+// https://github.com/google/snappy/blob/master/framing_format.txt
+func snappyCRC(b []byte) uint32 {
+	c := crc32.Update(0, crcTable, b)
+	return uint32(c>>15|c<<17) + 0xa282ead8
+}
+
+// snappyDecodedLen returns the length of the decoded block and the number of bytes
+// that the length header occupied.
+func snappyDecodedLen(src []byte) (blockLen, headerLen int, err error) {
+	v, n := binary.Uvarint(src)
+	if n <= 0 || v > 0xffffffff {
+		return 0, 0, ErrSnappyCorrupt
+	}
+
+	const wordSize = 32 << (^uint(0) >> 32 & 1)
+	if wordSize == 32 && v > 0x7fffffff {
+		return 0, 0, ErrSnappyTooLarge
+	}
+	return int(v), n, nil
+}