[SEBA-881] move device-management to go mod
Change-Id: Idf082ee75c157f72fd4173f653d9e13c1c55fcd3
diff --git a/vendor/google.golang.org/grpc/codes/codes.go b/vendor/google.golang.org/grpc/codes/codes.go
new file mode 100644
index 0000000..0273883
--- /dev/null
+++ b/vendor/google.golang.org/grpc/codes/codes.go
@@ -0,0 +1,198 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package codes defines the canonical error codes used by gRPC. It is
+// consistent across various languages.
+package codes // import "google.golang.org/grpc/codes"
+
+import (
+ "fmt"
+ "strconv"
+)
+
+// A Code is an unsigned 32-bit error code as defined in the gRPC spec.
+type Code uint32
+
+const (
+ // OK is returned on success.
+ OK Code = 0
+
+ // Canceled indicates the operation was canceled (typically by the caller).
+ Canceled Code = 1
+
+ // Unknown error. An example of where this error may be returned is
+ // if a Status value received from another address space belongs to
+ // an error-space that is not known in this address space. Also
+ // errors raised by APIs that do not return enough error information
+ // may be converted to this error.
+ Unknown Code = 2
+
+ // InvalidArgument indicates client specified an invalid argument.
+ // Note that this differs from FailedPrecondition. It indicates arguments
+ // that are problematic regardless of the state of the system
+ // (e.g., a malformed file name).
+ InvalidArgument Code = 3
+
+ // DeadlineExceeded means operation expired before completion.
+ // For operations that change the state of the system, this error may be
+ // returned even if the operation has completed successfully. For
+ // example, a successful response from a server could have been delayed
+ // long enough for the deadline to expire.
+ DeadlineExceeded Code = 4
+
+ // NotFound means some requested entity (e.g., file or directory) was
+ // not found.
+ NotFound Code = 5
+
+ // AlreadyExists means an attempt to create an entity failed because one
+ // already exists.
+ AlreadyExists Code = 6
+
+ // PermissionDenied indicates the caller does not have permission to
+ // execute the specified operation. It must not be used for rejections
+ // caused by exhausting some resource (use ResourceExhausted
+ // instead for those errors). It must not be
+ // used if the caller cannot be identified (use Unauthenticated
+ // instead for those errors).
+ PermissionDenied Code = 7
+
+ // ResourceExhausted indicates some resource has been exhausted, perhaps
+ // a per-user quota, or perhaps the entire file system is out of space.
+ ResourceExhausted Code = 8
+
+ // FailedPrecondition indicates operation was rejected because the
+ // system is not in a state required for the operation's execution.
+ // For example, directory to be deleted may be non-empty, an rmdir
+ // operation is applied to a non-directory, etc.
+ //
+ // A litmus test that may help a service implementor in deciding
+ // between FailedPrecondition, Aborted, and Unavailable:
+ // (a) Use Unavailable if the client can retry just the failing call.
+ // (b) Use Aborted if the client should retry at a higher-level
+ // (e.g., restarting a read-modify-write sequence).
+ // (c) Use FailedPrecondition if the client should not retry until
+ // the system state has been explicitly fixed. E.g., if an "rmdir"
+ // fails because the directory is non-empty, FailedPrecondition
+ // should be returned since the client should not retry unless
+ // they have first fixed up the directory by deleting files from it.
+ // (d) Use FailedPrecondition if the client performs conditional
+ // REST Get/Update/Delete on a resource and the resource on the
+ // server does not match the condition. E.g., conflicting
+ // read-modify-write on the same resource.
+ FailedPrecondition Code = 9
+
+ // Aborted indicates the operation was aborted, typically due to a
+ // concurrency issue like sequencer check failures, transaction aborts,
+ // etc.
+ //
+ // See litmus test above for deciding between FailedPrecondition,
+ // Aborted, and Unavailable.
+ Aborted Code = 10
+
+ // OutOfRange means operation was attempted past the valid range.
+ // E.g., seeking or reading past end of file.
+ //
+ // Unlike InvalidArgument, this error indicates a problem that may
+ // be fixed if the system state changes. For example, a 32-bit file
+ // system will generate InvalidArgument if asked to read at an
+ // offset that is not in the range [0,2^32-1], but it will generate
+ // OutOfRange if asked to read from an offset past the current
+ // file size.
+ //
+ // There is a fair bit of overlap between FailedPrecondition and
+ // OutOfRange. We recommend using OutOfRange (the more specific
+ // error) when it applies so that callers who are iterating through
+ // a space can easily look for an OutOfRange error to detect when
+ // they are done.
+ OutOfRange Code = 11
+
+ // Unimplemented indicates operation is not implemented or not
+ // supported/enabled in this service.
+ Unimplemented Code = 12
+
+ // Internal errors. Means some invariants expected by underlying
+ // system has been broken. If you see one of these errors,
+ // something is very broken.
+ Internal Code = 13
+
+ // Unavailable indicates the service is currently unavailable.
+ // This is a most likely a transient condition and may be corrected
+ // by retrying with a backoff. Note that it is not always safe to retry
+ // non-idempotent operations.
+ //
+ // See litmus test above for deciding between FailedPrecondition,
+ // Aborted, and Unavailable.
+ Unavailable Code = 14
+
+ // DataLoss indicates unrecoverable data loss or corruption.
+ DataLoss Code = 15
+
+ // Unauthenticated indicates the request does not have valid
+ // authentication credentials for the operation.
+ Unauthenticated Code = 16
+
+ _maxCode = 17
+)
+
+var strToCode = map[string]Code{
+ `"OK"`: OK,
+ `"CANCELLED"`:/* [sic] */ Canceled,
+ `"UNKNOWN"`: Unknown,
+ `"INVALID_ARGUMENT"`: InvalidArgument,
+ `"DEADLINE_EXCEEDED"`: DeadlineExceeded,
+ `"NOT_FOUND"`: NotFound,
+ `"ALREADY_EXISTS"`: AlreadyExists,
+ `"PERMISSION_DENIED"`: PermissionDenied,
+ `"RESOURCE_EXHAUSTED"`: ResourceExhausted,
+ `"FAILED_PRECONDITION"`: FailedPrecondition,
+ `"ABORTED"`: Aborted,
+ `"OUT_OF_RANGE"`: OutOfRange,
+ `"UNIMPLEMENTED"`: Unimplemented,
+ `"INTERNAL"`: Internal,
+ `"UNAVAILABLE"`: Unavailable,
+ `"DATA_LOSS"`: DataLoss,
+ `"UNAUTHENTICATED"`: Unauthenticated,
+}
+
+// UnmarshalJSON unmarshals b into the Code.
+func (c *Code) UnmarshalJSON(b []byte) error {
+ // From json.Unmarshaler: By convention, to approximate the behavior of
+ // Unmarshal itself, Unmarshalers implement UnmarshalJSON([]byte("null")) as
+ // a no-op.
+ if string(b) == "null" {
+ return nil
+ }
+ if c == nil {
+ return fmt.Errorf("nil receiver passed to UnmarshalJSON")
+ }
+
+ if ci, err := strconv.ParseUint(string(b), 10, 32); err == nil {
+ if ci >= _maxCode {
+ return fmt.Errorf("invalid code: %q", ci)
+ }
+
+ *c = Code(ci)
+ return nil
+ }
+
+ if jc, ok := strToCode[string(b)]; ok {
+ *c = jc
+ return nil
+ }
+ return fmt.Errorf("invalid code: %q", string(b))
+}