[SEBA-881] move device-management to go mod
Change-Id: Idf082ee75c157f72fd4173f653d9e13c1c55fcd3
diff --git a/vendor/google.golang.org/grpc/internal/backoff/backoff.go b/vendor/google.golang.org/grpc/internal/backoff/backoff.go
new file mode 100644
index 0000000..5fc0ee3
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/backoff/backoff.go
@@ -0,0 +1,73 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package backoff implement the backoff strategy for gRPC.
+//
+// This is kept in internal until the gRPC project decides whether or not to
+// allow alternative backoff strategies.
+package backoff
+
+import (
+ "time"
+
+ grpcbackoff "google.golang.org/grpc/backoff"
+ "google.golang.org/grpc/internal/grpcrand"
+)
+
+// Strategy defines the methodology for backing off after a grpc connection
+// failure.
+type Strategy interface {
+ // Backoff returns the amount of time to wait before the next retry given
+ // the number of consecutive failures.
+ Backoff(retries int) time.Duration
+}
+
+// DefaultExponential is an exponential backoff implementation using the
+// default values for all the configurable knobs defined in
+// https://github.com/grpc/grpc/blob/master/doc/connection-backoff.md.
+var DefaultExponential = Exponential{Config: grpcbackoff.DefaultConfig}
+
+// Exponential implements exponential backoff algorithm as defined in
+// https://github.com/grpc/grpc/blob/master/doc/connection-backoff.md.
+type Exponential struct {
+ // Config contains all options to configure the backoff algorithm.
+ Config grpcbackoff.Config
+}
+
+// Backoff returns the amount of time to wait before the next retry given the
+// number of retries.
+func (bc Exponential) Backoff(retries int) time.Duration {
+ if retries == 0 {
+ return bc.Config.BaseDelay
+ }
+ backoff, max := float64(bc.Config.BaseDelay), float64(bc.Config.MaxDelay)
+ for backoff < max && retries > 0 {
+ backoff *= bc.Config.Multiplier
+ retries--
+ }
+ if backoff > max {
+ backoff = max
+ }
+ // Randomize backoff delays so that if a cluster of requests start at
+ // the same time, they won't operate in lockstep.
+ backoff *= 1 + bc.Config.Jitter*(grpcrand.Float64()*2-1)
+ if backoff < 0 {
+ return 0
+ }
+ return time.Duration(backoff)
+}
diff --git a/vendor/google.golang.org/grpc/internal/balancerload/load.go b/vendor/google.golang.org/grpc/internal/balancerload/load.go
new file mode 100644
index 0000000..3a905d9
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/balancerload/load.go
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2019 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// Package balancerload defines APIs to parse server loads in trailers. The
+// parsed loads are sent to balancers in DoneInfo.
+package balancerload
+
+import (
+ "google.golang.org/grpc/metadata"
+)
+
+// Parser converts loads from metadata into a concrete type.
+type Parser interface {
+ // Parse parses loads from metadata.
+ Parse(md metadata.MD) interface{}
+}
+
+var parser Parser
+
+// SetParser sets the load parser.
+//
+// Not mutex-protected, should be called before any gRPC functions.
+func SetParser(lr Parser) {
+ parser = lr
+}
+
+// Parse calls parser.Read().
+func Parse(md metadata.MD) interface{} {
+ if parser == nil {
+ return nil
+ }
+ return parser.Parse(md)
+}
diff --git a/vendor/google.golang.org/grpc/internal/binarylog/binarylog.go b/vendor/google.golang.org/grpc/internal/binarylog/binarylog.go
new file mode 100644
index 0000000..4062c02
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/binarylog/binarylog.go
@@ -0,0 +1,167 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package binarylog implementation binary logging as defined in
+// https://github.com/grpc/proposal/blob/master/A16-binary-logging.md.
+package binarylog
+
+import (
+ "fmt"
+ "os"
+
+ "google.golang.org/grpc/grpclog"
+)
+
+// Logger is the global binary logger. It can be used to get binary logger for
+// each method.
+type Logger interface {
+ getMethodLogger(methodName string) *MethodLogger
+}
+
+// binLogger is the global binary logger for the binary. One of this should be
+// built at init time from the configuration (environment variable or flags).
+//
+// It is used to get a methodLogger for each individual method.
+var binLogger Logger
+
+// SetLogger sets the binarg logger.
+//
+// Only call this at init time.
+func SetLogger(l Logger) {
+ binLogger = l
+}
+
+// GetMethodLogger returns the methodLogger for the given methodName.
+//
+// methodName should be in the format of "/service/method".
+//
+// Each methodLogger returned by this method is a new instance. This is to
+// generate sequence id within the call.
+func GetMethodLogger(methodName string) *MethodLogger {
+ if binLogger == nil {
+ return nil
+ }
+ return binLogger.getMethodLogger(methodName)
+}
+
+func init() {
+ const envStr = "GRPC_BINARY_LOG_FILTER"
+ configStr := os.Getenv(envStr)
+ binLogger = NewLoggerFromConfigString(configStr)
+}
+
+type methodLoggerConfig struct {
+ // Max length of header and message.
+ hdr, msg uint64
+}
+
+type logger struct {
+ all *methodLoggerConfig
+ services map[string]*methodLoggerConfig
+ methods map[string]*methodLoggerConfig
+
+ blacklist map[string]struct{}
+}
+
+// newEmptyLogger creates an empty logger. The map fields need to be filled in
+// using the set* functions.
+func newEmptyLogger() *logger {
+ return &logger{}
+}
+
+// Set method logger for "*".
+func (l *logger) setDefaultMethodLogger(ml *methodLoggerConfig) error {
+ if l.all != nil {
+ return fmt.Errorf("conflicting global rules found")
+ }
+ l.all = ml
+ return nil
+}
+
+// Set method logger for "service/*".
+//
+// New methodLogger with same service overrides the old one.
+func (l *logger) setServiceMethodLogger(service string, ml *methodLoggerConfig) error {
+ if _, ok := l.services[service]; ok {
+ return fmt.Errorf("conflicting rules for service %v found", service)
+ }
+ if l.services == nil {
+ l.services = make(map[string]*methodLoggerConfig)
+ }
+ l.services[service] = ml
+ return nil
+}
+
+// Set method logger for "service/method".
+//
+// New methodLogger with same method overrides the old one.
+func (l *logger) setMethodMethodLogger(method string, ml *methodLoggerConfig) error {
+ if _, ok := l.blacklist[method]; ok {
+ return fmt.Errorf("conflicting rules for method %v found", method)
+ }
+ if _, ok := l.methods[method]; ok {
+ return fmt.Errorf("conflicting rules for method %v found", method)
+ }
+ if l.methods == nil {
+ l.methods = make(map[string]*methodLoggerConfig)
+ }
+ l.methods[method] = ml
+ return nil
+}
+
+// Set blacklist method for "-service/method".
+func (l *logger) setBlacklist(method string) error {
+ if _, ok := l.blacklist[method]; ok {
+ return fmt.Errorf("conflicting rules for method %v found", method)
+ }
+ if _, ok := l.methods[method]; ok {
+ return fmt.Errorf("conflicting rules for method %v found", method)
+ }
+ if l.blacklist == nil {
+ l.blacklist = make(map[string]struct{})
+ }
+ l.blacklist[method] = struct{}{}
+ return nil
+}
+
+// getMethodLogger returns the methodLogger for the given methodName.
+//
+// methodName should be in the format of "/service/method".
+//
+// Each methodLogger returned by this method is a new instance. This is to
+// generate sequence id within the call.
+func (l *logger) getMethodLogger(methodName string) *MethodLogger {
+ s, m, err := parseMethodName(methodName)
+ if err != nil {
+ grpclog.Infof("binarylogging: failed to parse %q: %v", methodName, err)
+ return nil
+ }
+ if ml, ok := l.methods[s+"/"+m]; ok {
+ return newMethodLogger(ml.hdr, ml.msg)
+ }
+ if _, ok := l.blacklist[s+"/"+m]; ok {
+ return nil
+ }
+ if ml, ok := l.services[s]; ok {
+ return newMethodLogger(ml.hdr, ml.msg)
+ }
+ if l.all == nil {
+ return nil
+ }
+ return newMethodLogger(l.all.hdr, l.all.msg)
+}
diff --git a/vendor/google.golang.org/grpc/internal/binarylog/binarylog_testutil.go b/vendor/google.golang.org/grpc/internal/binarylog/binarylog_testutil.go
new file mode 100644
index 0000000..1ee00a3
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/binarylog/binarylog_testutil.go
@@ -0,0 +1,42 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// This file contains exported variables/functions that are exported for testing
+// only.
+//
+// An ideal way for this would be to put those in a *_test.go but in binarylog
+// package. But this doesn't work with staticcheck with go module. Error was:
+// "MdToMetadataProto not declared by package binarylog". This could be caused
+// by the way staticcheck looks for files for a certain package, which doesn't
+// support *_test.go files.
+//
+// Move those to binary_test.go when staticcheck is fixed.
+
+package binarylog
+
+var (
+ // AllLogger is a logger that logs all headers/messages for all RPCs. It's
+ // for testing only.
+ AllLogger = NewLoggerFromConfigString("*")
+ // MdToMetadataProto converts metadata to a binary logging proto message.
+ // It's for testing only.
+ MdToMetadataProto = mdToMetadataProto
+ // AddrToProto converts an address to a binary logging proto message. It's
+ // for testing only.
+ AddrToProto = addrToProto
+)
diff --git a/vendor/google.golang.org/grpc/internal/binarylog/env_config.go b/vendor/google.golang.org/grpc/internal/binarylog/env_config.go
new file mode 100644
index 0000000..be30d0e
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/binarylog/env_config.go
@@ -0,0 +1,210 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package binarylog
+
+import (
+ "errors"
+ "fmt"
+ "regexp"
+ "strconv"
+ "strings"
+
+ "google.golang.org/grpc/grpclog"
+)
+
+// NewLoggerFromConfigString reads the string and build a logger. It can be used
+// to build a new logger and assign it to binarylog.Logger.
+//
+// Example filter config strings:
+// - "" Nothing will be logged
+// - "*" All headers and messages will be fully logged.
+// - "*{h}" Only headers will be logged.
+// - "*{m:256}" Only the first 256 bytes of each message will be logged.
+// - "Foo/*" Logs every method in service Foo
+// - "Foo/*,-Foo/Bar" Logs every method in service Foo except method /Foo/Bar
+// - "Foo/*,Foo/Bar{m:256}" Logs the first 256 bytes of each message in method
+// /Foo/Bar, logs all headers and messages in every other method in service
+// Foo.
+//
+// If two configs exist for one certain method or service, the one specified
+// later overrides the previous config.
+func NewLoggerFromConfigString(s string) Logger {
+ if s == "" {
+ return nil
+ }
+ l := newEmptyLogger()
+ methods := strings.Split(s, ",")
+ for _, method := range methods {
+ if err := l.fillMethodLoggerWithConfigString(method); err != nil {
+ grpclog.Warningf("failed to parse binary log config: %v", err)
+ return nil
+ }
+ }
+ return l
+}
+
+// fillMethodLoggerWithConfigString parses config, creates methodLogger and adds
+// it to the right map in the logger.
+func (l *logger) fillMethodLoggerWithConfigString(config string) error {
+ // "" is invalid.
+ if config == "" {
+ return errors.New("empty string is not a valid method binary logging config")
+ }
+
+ // "-service/method", blacklist, no * or {} allowed.
+ if config[0] == '-' {
+ s, m, suffix, err := parseMethodConfigAndSuffix(config[1:])
+ if err != nil {
+ return fmt.Errorf("invalid config: %q, %v", config, err)
+ }
+ if m == "*" {
+ return fmt.Errorf("invalid config: %q, %v", config, "* not allowed in blacklist config")
+ }
+ if suffix != "" {
+ return fmt.Errorf("invalid config: %q, %v", config, "header/message limit not allowed in blacklist config")
+ }
+ if err := l.setBlacklist(s + "/" + m); err != nil {
+ return fmt.Errorf("invalid config: %v", err)
+ }
+ return nil
+ }
+
+ // "*{h:256;m:256}"
+ if config[0] == '*' {
+ hdr, msg, err := parseHeaderMessageLengthConfig(config[1:])
+ if err != nil {
+ return fmt.Errorf("invalid config: %q, %v", config, err)
+ }
+ if err := l.setDefaultMethodLogger(&methodLoggerConfig{hdr: hdr, msg: msg}); err != nil {
+ return fmt.Errorf("invalid config: %v", err)
+ }
+ return nil
+ }
+
+ s, m, suffix, err := parseMethodConfigAndSuffix(config)
+ if err != nil {
+ return fmt.Errorf("invalid config: %q, %v", config, err)
+ }
+ hdr, msg, err := parseHeaderMessageLengthConfig(suffix)
+ if err != nil {
+ return fmt.Errorf("invalid header/message length config: %q, %v", suffix, err)
+ }
+ if m == "*" {
+ if err := l.setServiceMethodLogger(s, &methodLoggerConfig{hdr: hdr, msg: msg}); err != nil {
+ return fmt.Errorf("invalid config: %v", err)
+ }
+ } else {
+ if err := l.setMethodMethodLogger(s+"/"+m, &methodLoggerConfig{hdr: hdr, msg: msg}); err != nil {
+ return fmt.Errorf("invalid config: %v", err)
+ }
+ }
+ return nil
+}
+
+const (
+ // TODO: this const is only used by env_config now. But could be useful for
+ // other config. Move to binarylog.go if necessary.
+ maxUInt = ^uint64(0)
+
+ // For "p.s/m" plus any suffix. Suffix will be parsed again. See test for
+ // expected output.
+ longMethodConfigRegexpStr = `^([\w./]+)/((?:\w+)|[*])(.+)?$`
+
+ // For suffix from above, "{h:123,m:123}". See test for expected output.
+ optionalLengthRegexpStr = `(?::(\d+))?` // Optional ":123".
+ headerConfigRegexpStr = `^{h` + optionalLengthRegexpStr + `}$`
+ messageConfigRegexpStr = `^{m` + optionalLengthRegexpStr + `}$`
+ headerMessageConfigRegexpStr = `^{h` + optionalLengthRegexpStr + `;m` + optionalLengthRegexpStr + `}$`
+)
+
+var (
+ longMethodConfigRegexp = regexp.MustCompile(longMethodConfigRegexpStr)
+ headerConfigRegexp = regexp.MustCompile(headerConfigRegexpStr)
+ messageConfigRegexp = regexp.MustCompile(messageConfigRegexpStr)
+ headerMessageConfigRegexp = regexp.MustCompile(headerMessageConfigRegexpStr)
+)
+
+// Turn "service/method{h;m}" into "service", "method", "{h;m}".
+func parseMethodConfigAndSuffix(c string) (service, method, suffix string, _ error) {
+ // Regexp result:
+ //
+ // in: "p.s/m{h:123,m:123}",
+ // out: []string{"p.s/m{h:123,m:123}", "p.s", "m", "{h:123,m:123}"},
+ match := longMethodConfigRegexp.FindStringSubmatch(c)
+ if match == nil {
+ return "", "", "", fmt.Errorf("%q contains invalid substring", c)
+ }
+ service = match[1]
+ method = match[2]
+ suffix = match[3]
+ return
+}
+
+// Turn "{h:123;m:345}" into 123, 345.
+//
+// Return maxUInt if length is unspecified.
+func parseHeaderMessageLengthConfig(c string) (hdrLenStr, msgLenStr uint64, err error) {
+ if c == "" {
+ return maxUInt, maxUInt, nil
+ }
+ // Header config only.
+ if match := headerConfigRegexp.FindStringSubmatch(c); match != nil {
+ if s := match[1]; s != "" {
+ hdrLenStr, err = strconv.ParseUint(s, 10, 64)
+ if err != nil {
+ return 0, 0, fmt.Errorf("failed to convert %q to uint", s)
+ }
+ return hdrLenStr, 0, nil
+ }
+ return maxUInt, 0, nil
+ }
+
+ // Message config only.
+ if match := messageConfigRegexp.FindStringSubmatch(c); match != nil {
+ if s := match[1]; s != "" {
+ msgLenStr, err = strconv.ParseUint(s, 10, 64)
+ if err != nil {
+ return 0, 0, fmt.Errorf("failed to convert %q to uint", s)
+ }
+ return 0, msgLenStr, nil
+ }
+ return 0, maxUInt, nil
+ }
+
+ // Header and message config both.
+ if match := headerMessageConfigRegexp.FindStringSubmatch(c); match != nil {
+ // Both hdr and msg are specified, but one or two of them might be empty.
+ hdrLenStr = maxUInt
+ msgLenStr = maxUInt
+ if s := match[1]; s != "" {
+ hdrLenStr, err = strconv.ParseUint(s, 10, 64)
+ if err != nil {
+ return 0, 0, fmt.Errorf("failed to convert %q to uint", s)
+ }
+ }
+ if s := match[2]; s != "" {
+ msgLenStr, err = strconv.ParseUint(s, 10, 64)
+ if err != nil {
+ return 0, 0, fmt.Errorf("failed to convert %q to uint", s)
+ }
+ }
+ return hdrLenStr, msgLenStr, nil
+ }
+ return 0, 0, fmt.Errorf("%q contains invalid substring", c)
+}
diff --git a/vendor/google.golang.org/grpc/internal/binarylog/method_logger.go b/vendor/google.golang.org/grpc/internal/binarylog/method_logger.go
new file mode 100644
index 0000000..160f6e8
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/binarylog/method_logger.go
@@ -0,0 +1,423 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package binarylog
+
+import (
+ "net"
+ "strings"
+ "sync/atomic"
+ "time"
+
+ "github.com/golang/protobuf/proto"
+ "github.com/golang/protobuf/ptypes"
+ pb "google.golang.org/grpc/binarylog/grpc_binarylog_v1"
+ "google.golang.org/grpc/grpclog"
+ "google.golang.org/grpc/metadata"
+ "google.golang.org/grpc/status"
+)
+
+type callIDGenerator struct {
+ id uint64
+}
+
+func (g *callIDGenerator) next() uint64 {
+ id := atomic.AddUint64(&g.id, 1)
+ return id
+}
+
+// reset is for testing only, and doesn't need to be thread safe.
+func (g *callIDGenerator) reset() {
+ g.id = 0
+}
+
+var idGen callIDGenerator
+
+// MethodLogger is the sub-logger for each method.
+type MethodLogger struct {
+ headerMaxLen, messageMaxLen uint64
+
+ callID uint64
+ idWithinCallGen *callIDGenerator
+
+ sink Sink // TODO(blog): make this plugable.
+}
+
+func newMethodLogger(h, m uint64) *MethodLogger {
+ return &MethodLogger{
+ headerMaxLen: h,
+ messageMaxLen: m,
+
+ callID: idGen.next(),
+ idWithinCallGen: &callIDGenerator{},
+
+ sink: defaultSink, // TODO(blog): make it plugable.
+ }
+}
+
+// Log creates a proto binary log entry, and logs it to the sink.
+func (ml *MethodLogger) Log(c LogEntryConfig) {
+ m := c.toProto()
+ timestamp, _ := ptypes.TimestampProto(time.Now())
+ m.Timestamp = timestamp
+ m.CallId = ml.callID
+ m.SequenceIdWithinCall = ml.idWithinCallGen.next()
+
+ switch pay := m.Payload.(type) {
+ case *pb.GrpcLogEntry_ClientHeader:
+ m.PayloadTruncated = ml.truncateMetadata(pay.ClientHeader.GetMetadata())
+ case *pb.GrpcLogEntry_ServerHeader:
+ m.PayloadTruncated = ml.truncateMetadata(pay.ServerHeader.GetMetadata())
+ case *pb.GrpcLogEntry_Message:
+ m.PayloadTruncated = ml.truncateMessage(pay.Message)
+ }
+
+ ml.sink.Write(m)
+}
+
+func (ml *MethodLogger) truncateMetadata(mdPb *pb.Metadata) (truncated bool) {
+ if ml.headerMaxLen == maxUInt {
+ return false
+ }
+ var (
+ bytesLimit = ml.headerMaxLen
+ index int
+ )
+ // At the end of the loop, index will be the first entry where the total
+ // size is greater than the limit:
+ //
+ // len(entry[:index]) <= ml.hdr && len(entry[:index+1]) > ml.hdr.
+ for ; index < len(mdPb.Entry); index++ {
+ entry := mdPb.Entry[index]
+ if entry.Key == "grpc-trace-bin" {
+ // "grpc-trace-bin" is a special key. It's kept in the log entry,
+ // but not counted towards the size limit.
+ continue
+ }
+ currentEntryLen := uint64(len(entry.Value))
+ if currentEntryLen > bytesLimit {
+ break
+ }
+ bytesLimit -= currentEntryLen
+ }
+ truncated = index < len(mdPb.Entry)
+ mdPb.Entry = mdPb.Entry[:index]
+ return truncated
+}
+
+func (ml *MethodLogger) truncateMessage(msgPb *pb.Message) (truncated bool) {
+ if ml.messageMaxLen == maxUInt {
+ return false
+ }
+ if ml.messageMaxLen >= uint64(len(msgPb.Data)) {
+ return false
+ }
+ msgPb.Data = msgPb.Data[:ml.messageMaxLen]
+ return true
+}
+
+// LogEntryConfig represents the configuration for binary log entry.
+type LogEntryConfig interface {
+ toProto() *pb.GrpcLogEntry
+}
+
+// ClientHeader configs the binary log entry to be a ClientHeader entry.
+type ClientHeader struct {
+ OnClientSide bool
+ Header metadata.MD
+ MethodName string
+ Authority string
+ Timeout time.Duration
+ // PeerAddr is required only when it's on server side.
+ PeerAddr net.Addr
+}
+
+func (c *ClientHeader) toProto() *pb.GrpcLogEntry {
+ // This function doesn't need to set all the fields (e.g. seq ID). The Log
+ // function will set the fields when necessary.
+ clientHeader := &pb.ClientHeader{
+ Metadata: mdToMetadataProto(c.Header),
+ MethodName: c.MethodName,
+ Authority: c.Authority,
+ }
+ if c.Timeout > 0 {
+ clientHeader.Timeout = ptypes.DurationProto(c.Timeout)
+ }
+ ret := &pb.GrpcLogEntry{
+ Type: pb.GrpcLogEntry_EVENT_TYPE_CLIENT_HEADER,
+ Payload: &pb.GrpcLogEntry_ClientHeader{
+ ClientHeader: clientHeader,
+ },
+ }
+ if c.OnClientSide {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+ } else {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+ }
+ if c.PeerAddr != nil {
+ ret.Peer = addrToProto(c.PeerAddr)
+ }
+ return ret
+}
+
+// ServerHeader configs the binary log entry to be a ServerHeader entry.
+type ServerHeader struct {
+ OnClientSide bool
+ Header metadata.MD
+ // PeerAddr is required only when it's on client side.
+ PeerAddr net.Addr
+}
+
+func (c *ServerHeader) toProto() *pb.GrpcLogEntry {
+ ret := &pb.GrpcLogEntry{
+ Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_HEADER,
+ Payload: &pb.GrpcLogEntry_ServerHeader{
+ ServerHeader: &pb.ServerHeader{
+ Metadata: mdToMetadataProto(c.Header),
+ },
+ },
+ }
+ if c.OnClientSide {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+ } else {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+ }
+ if c.PeerAddr != nil {
+ ret.Peer = addrToProto(c.PeerAddr)
+ }
+ return ret
+}
+
+// ClientMessage configs the binary log entry to be a ClientMessage entry.
+type ClientMessage struct {
+ OnClientSide bool
+ // Message can be a proto.Message or []byte. Other messages formats are not
+ // supported.
+ Message interface{}
+}
+
+func (c *ClientMessage) toProto() *pb.GrpcLogEntry {
+ var (
+ data []byte
+ err error
+ )
+ if m, ok := c.Message.(proto.Message); ok {
+ data, err = proto.Marshal(m)
+ if err != nil {
+ grpclog.Infof("binarylogging: failed to marshal proto message: %v", err)
+ }
+ } else if b, ok := c.Message.([]byte); ok {
+ data = b
+ } else {
+ grpclog.Infof("binarylogging: message to log is neither proto.message nor []byte")
+ }
+ ret := &pb.GrpcLogEntry{
+ Type: pb.GrpcLogEntry_EVENT_TYPE_CLIENT_MESSAGE,
+ Payload: &pb.GrpcLogEntry_Message{
+ Message: &pb.Message{
+ Length: uint32(len(data)),
+ Data: data,
+ },
+ },
+ }
+ if c.OnClientSide {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+ } else {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+ }
+ return ret
+}
+
+// ServerMessage configs the binary log entry to be a ServerMessage entry.
+type ServerMessage struct {
+ OnClientSide bool
+ // Message can be a proto.Message or []byte. Other messages formats are not
+ // supported.
+ Message interface{}
+}
+
+func (c *ServerMessage) toProto() *pb.GrpcLogEntry {
+ var (
+ data []byte
+ err error
+ )
+ if m, ok := c.Message.(proto.Message); ok {
+ data, err = proto.Marshal(m)
+ if err != nil {
+ grpclog.Infof("binarylogging: failed to marshal proto message: %v", err)
+ }
+ } else if b, ok := c.Message.([]byte); ok {
+ data = b
+ } else {
+ grpclog.Infof("binarylogging: message to log is neither proto.message nor []byte")
+ }
+ ret := &pb.GrpcLogEntry{
+ Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_MESSAGE,
+ Payload: &pb.GrpcLogEntry_Message{
+ Message: &pb.Message{
+ Length: uint32(len(data)),
+ Data: data,
+ },
+ },
+ }
+ if c.OnClientSide {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+ } else {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+ }
+ return ret
+}
+
+// ClientHalfClose configs the binary log entry to be a ClientHalfClose entry.
+type ClientHalfClose struct {
+ OnClientSide bool
+}
+
+func (c *ClientHalfClose) toProto() *pb.GrpcLogEntry {
+ ret := &pb.GrpcLogEntry{
+ Type: pb.GrpcLogEntry_EVENT_TYPE_CLIENT_HALF_CLOSE,
+ Payload: nil, // No payload here.
+ }
+ if c.OnClientSide {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+ } else {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+ }
+ return ret
+}
+
+// ServerTrailer configs the binary log entry to be a ServerTrailer entry.
+type ServerTrailer struct {
+ OnClientSide bool
+ Trailer metadata.MD
+ // Err is the status error.
+ Err error
+ // PeerAddr is required only when it's on client side and the RPC is trailer
+ // only.
+ PeerAddr net.Addr
+}
+
+func (c *ServerTrailer) toProto() *pb.GrpcLogEntry {
+ st, ok := status.FromError(c.Err)
+ if !ok {
+ grpclog.Info("binarylogging: error in trailer is not a status error")
+ }
+ var (
+ detailsBytes []byte
+ err error
+ )
+ stProto := st.Proto()
+ if stProto != nil && len(stProto.Details) != 0 {
+ detailsBytes, err = proto.Marshal(stProto)
+ if err != nil {
+ grpclog.Infof("binarylogging: failed to marshal status proto: %v", err)
+ }
+ }
+ ret := &pb.GrpcLogEntry{
+ Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_TRAILER,
+ Payload: &pb.GrpcLogEntry_Trailer{
+ Trailer: &pb.Trailer{
+ Metadata: mdToMetadataProto(c.Trailer),
+ StatusCode: uint32(st.Code()),
+ StatusMessage: st.Message(),
+ StatusDetails: detailsBytes,
+ },
+ },
+ }
+ if c.OnClientSide {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+ } else {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+ }
+ if c.PeerAddr != nil {
+ ret.Peer = addrToProto(c.PeerAddr)
+ }
+ return ret
+}
+
+// Cancel configs the binary log entry to be a Cancel entry.
+type Cancel struct {
+ OnClientSide bool
+}
+
+func (c *Cancel) toProto() *pb.GrpcLogEntry {
+ ret := &pb.GrpcLogEntry{
+ Type: pb.GrpcLogEntry_EVENT_TYPE_CANCEL,
+ Payload: nil,
+ }
+ if c.OnClientSide {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+ } else {
+ ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+ }
+ return ret
+}
+
+// metadataKeyOmit returns whether the metadata entry with this key should be
+// omitted.
+func metadataKeyOmit(key string) bool {
+ switch key {
+ case "lb-token", ":path", ":authority", "content-encoding", "content-type", "user-agent", "te":
+ return true
+ case "grpc-trace-bin": // grpc-trace-bin is special because it's visiable to users.
+ return false
+ }
+ return strings.HasPrefix(key, "grpc-")
+}
+
+func mdToMetadataProto(md metadata.MD) *pb.Metadata {
+ ret := &pb.Metadata{}
+ for k, vv := range md {
+ if metadataKeyOmit(k) {
+ continue
+ }
+ for _, v := range vv {
+ ret.Entry = append(ret.Entry,
+ &pb.MetadataEntry{
+ Key: k,
+ Value: []byte(v),
+ },
+ )
+ }
+ }
+ return ret
+}
+
+func addrToProto(addr net.Addr) *pb.Address {
+ ret := &pb.Address{}
+ switch a := addr.(type) {
+ case *net.TCPAddr:
+ if a.IP.To4() != nil {
+ ret.Type = pb.Address_TYPE_IPV4
+ } else if a.IP.To16() != nil {
+ ret.Type = pb.Address_TYPE_IPV6
+ } else {
+ ret.Type = pb.Address_TYPE_UNKNOWN
+ // Do not set address and port fields.
+ break
+ }
+ ret.Address = a.IP.String()
+ ret.IpPort = uint32(a.Port)
+ case *net.UnixAddr:
+ ret.Type = pb.Address_TYPE_UNIX
+ ret.Address = a.String()
+ default:
+ ret.Type = pb.Address_TYPE_UNKNOWN
+ }
+ return ret
+}
diff --git a/vendor/google.golang.org/grpc/internal/binarylog/regenerate.sh b/vendor/google.golang.org/grpc/internal/binarylog/regenerate.sh
new file mode 100644
index 0000000..113d40c
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/binarylog/regenerate.sh
@@ -0,0 +1,33 @@
+#!/bin/bash
+# Copyright 2018 gRPC authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -eux -o pipefail
+
+TMP=$(mktemp -d)
+
+function finish {
+ rm -rf "$TMP"
+}
+trap finish EXIT
+
+pushd "$TMP"
+mkdir -p grpc/binarylog/grpc_binarylog_v1
+curl https://raw.githubusercontent.com/grpc/grpc-proto/master/grpc/binlog/v1/binarylog.proto > grpc/binarylog/grpc_binarylog_v1/binarylog.proto
+
+protoc --go_out=plugins=grpc,paths=source_relative:. -I. grpc/binarylog/grpc_binarylog_v1/*.proto
+popd
+rm -f ./grpc_binarylog_v1/*.pb.go
+cp "$TMP"/grpc/binarylog/grpc_binarylog_v1/*.pb.go ../../binarylog/grpc_binarylog_v1/
+
diff --git a/vendor/google.golang.org/grpc/internal/binarylog/sink.go b/vendor/google.golang.org/grpc/internal/binarylog/sink.go
new file mode 100644
index 0000000..a2e7c34
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/binarylog/sink.go
@@ -0,0 +1,162 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package binarylog
+
+import (
+ "bufio"
+ "encoding/binary"
+ "fmt"
+ "io"
+ "io/ioutil"
+ "sync"
+ "time"
+
+ "github.com/golang/protobuf/proto"
+ pb "google.golang.org/grpc/binarylog/grpc_binarylog_v1"
+ "google.golang.org/grpc/grpclog"
+)
+
+var (
+ defaultSink Sink = &noopSink{} // TODO(blog): change this default (file in /tmp).
+)
+
+// SetDefaultSink sets the sink where binary logs will be written to.
+//
+// Not thread safe. Only set during initialization.
+func SetDefaultSink(s Sink) {
+ if defaultSink != nil {
+ defaultSink.Close()
+ }
+ defaultSink = s
+}
+
+// Sink writes log entry into the binary log sink.
+type Sink interface {
+ // Write will be called to write the log entry into the sink.
+ //
+ // It should be thread-safe so it can be called in parallel.
+ Write(*pb.GrpcLogEntry) error
+ // Close will be called when the Sink is replaced by a new Sink.
+ Close() error
+}
+
+type noopSink struct{}
+
+func (ns *noopSink) Write(*pb.GrpcLogEntry) error { return nil }
+func (ns *noopSink) Close() error { return nil }
+
+// newWriterSink creates a binary log sink with the given writer.
+//
+// Write() marshals the proto message and writes it to the given writer. Each
+// message is prefixed with a 4 byte big endian unsigned integer as the length.
+//
+// No buffer is done, Close() doesn't try to close the writer.
+func newWriterSink(w io.Writer) *writerSink {
+ return &writerSink{out: w}
+}
+
+type writerSink struct {
+ out io.Writer
+}
+
+func (ws *writerSink) Write(e *pb.GrpcLogEntry) error {
+ b, err := proto.Marshal(e)
+ if err != nil {
+ grpclog.Infof("binary logging: failed to marshal proto message: %v", err)
+ }
+ hdr := make([]byte, 4)
+ binary.BigEndian.PutUint32(hdr, uint32(len(b)))
+ if _, err := ws.out.Write(hdr); err != nil {
+ return err
+ }
+ if _, err := ws.out.Write(b); err != nil {
+ return err
+ }
+ return nil
+}
+
+func (ws *writerSink) Close() error { return nil }
+
+type bufWriteCloserSink struct {
+ mu sync.Mutex
+ closer io.Closer
+ out *writerSink // out is built on buf.
+ buf *bufio.Writer // buf is kept for flush.
+
+ writeStartOnce sync.Once
+ writeTicker *time.Ticker
+}
+
+func (fs *bufWriteCloserSink) Write(e *pb.GrpcLogEntry) error {
+ // Start the write loop when Write is called.
+ fs.writeStartOnce.Do(fs.startFlushGoroutine)
+ fs.mu.Lock()
+ if err := fs.out.Write(e); err != nil {
+ fs.mu.Unlock()
+ return err
+ }
+ fs.mu.Unlock()
+ return nil
+}
+
+const (
+ bufFlushDuration = 60 * time.Second
+)
+
+func (fs *bufWriteCloserSink) startFlushGoroutine() {
+ fs.writeTicker = time.NewTicker(bufFlushDuration)
+ go func() {
+ for range fs.writeTicker.C {
+ fs.mu.Lock()
+ fs.buf.Flush()
+ fs.mu.Unlock()
+ }
+ }()
+}
+
+func (fs *bufWriteCloserSink) Close() error {
+ if fs.writeTicker != nil {
+ fs.writeTicker.Stop()
+ }
+ fs.mu.Lock()
+ fs.buf.Flush()
+ fs.closer.Close()
+ fs.out.Close()
+ fs.mu.Unlock()
+ return nil
+}
+
+func newBufWriteCloserSink(o io.WriteCloser) Sink {
+ bufW := bufio.NewWriter(o)
+ return &bufWriteCloserSink{
+ closer: o,
+ out: newWriterSink(bufW),
+ buf: bufW,
+ }
+}
+
+// NewTempFileSink creates a temp file and returns a Sink that writes to this
+// file.
+func NewTempFileSink() (Sink, error) {
+ tempFile, err := ioutil.TempFile("/tmp", "grpcgo_binarylog_*.txt")
+ if err != nil {
+ return nil, fmt.Errorf("failed to create temp file: %v", err)
+ }
+ return newBufWriteCloserSink(tempFile), nil
+}
diff --git a/vendor/google.golang.org/grpc/internal/binarylog/util.go b/vendor/google.golang.org/grpc/internal/binarylog/util.go
new file mode 100644
index 0000000..15dc780
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/binarylog/util.go
@@ -0,0 +1,41 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package binarylog
+
+import (
+ "errors"
+ "strings"
+)
+
+// parseMethodName splits service and method from the input. It expects format
+// "/service/method".
+//
+// TODO: move to internal/grpcutil.
+func parseMethodName(methodName string) (service, method string, _ error) {
+ if !strings.HasPrefix(methodName, "/") {
+ return "", "", errors.New("invalid method name: should start with /")
+ }
+ methodName = methodName[1:]
+
+ pos := strings.LastIndex(methodName, "/")
+ if pos < 0 {
+ return "", "", errors.New("invalid method name: suffix /method is missing")
+ }
+ return methodName[:pos], methodName[pos+1:], nil
+}
diff --git a/vendor/google.golang.org/grpc/internal/buffer/unbounded.go b/vendor/google.golang.org/grpc/internal/buffer/unbounded.go
new file mode 100644
index 0000000..2cb3109
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/buffer/unbounded.go
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2019 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package buffer provides an implementation of an unbounded buffer.
+package buffer
+
+import "sync"
+
+// Unbounded is an implementation of an unbounded buffer which does not use
+// extra goroutines. This is typically used for passing updates from one entity
+// to another within gRPC.
+//
+// All methods on this type are thread-safe and don't block on anything except
+// the underlying mutex used for synchronization.
+type Unbounded struct {
+ c chan interface{}
+ mu sync.Mutex
+ backlog []interface{}
+}
+
+// NewUnbounded returns a new instance of Unbounded.
+func NewUnbounded() *Unbounded {
+ return &Unbounded{c: make(chan interface{}, 1)}
+}
+
+// Put adds t to the unbounded buffer.
+func (b *Unbounded) Put(t interface{}) {
+ b.mu.Lock()
+ if len(b.backlog) == 0 {
+ select {
+ case b.c <- t:
+ b.mu.Unlock()
+ return
+ default:
+ }
+ }
+ b.backlog = append(b.backlog, t)
+ b.mu.Unlock()
+}
+
+// Load sends the earliest buffered data, if any, onto the read channel
+// returned by Get(). Users are expected to call this every time they read a
+// value from the read channel.
+func (b *Unbounded) Load() {
+ b.mu.Lock()
+ if len(b.backlog) > 0 {
+ select {
+ case b.c <- b.backlog[0]:
+ b.backlog[0] = nil
+ b.backlog = b.backlog[1:]
+ default:
+ }
+ }
+ b.mu.Unlock()
+}
+
+// Get returns a read channel on which values added to the buffer, via Put(),
+// are sent on.
+//
+// Upon reading a value from this channel, users are expected to call Load() to
+// send the next buffered value onto the channel if there is any.
+func (b *Unbounded) Get() <-chan interface{} {
+ return b.c
+}
diff --git a/vendor/google.golang.org/grpc/internal/channelz/funcs.go b/vendor/google.golang.org/grpc/internal/channelz/funcs.go
new file mode 100644
index 0000000..f0744f9
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/channelz/funcs.go
@@ -0,0 +1,727 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package channelz defines APIs for enabling channelz service, entry
+// registration/deletion, and accessing channelz data. It also defines channelz
+// metric struct formats.
+//
+// All APIs in this package are experimental.
+package channelz
+
+import (
+ "fmt"
+ "sort"
+ "sync"
+ "sync/atomic"
+ "time"
+
+ "google.golang.org/grpc/grpclog"
+)
+
+const (
+ defaultMaxTraceEntry int32 = 30
+)
+
+var (
+ db dbWrapper
+ idGen idGenerator
+ // EntryPerPage defines the number of channelz entries to be shown on a web page.
+ EntryPerPage = int64(50)
+ curState int32
+ maxTraceEntry = defaultMaxTraceEntry
+)
+
+// TurnOn turns on channelz data collection.
+func TurnOn() {
+ if !IsOn() {
+ NewChannelzStorage()
+ atomic.StoreInt32(&curState, 1)
+ }
+}
+
+// IsOn returns whether channelz data collection is on.
+func IsOn() bool {
+ return atomic.CompareAndSwapInt32(&curState, 1, 1)
+}
+
+// SetMaxTraceEntry sets maximum number of trace entry per entity (i.e. channel/subchannel).
+// Setting it to 0 will disable channel tracing.
+func SetMaxTraceEntry(i int32) {
+ atomic.StoreInt32(&maxTraceEntry, i)
+}
+
+// ResetMaxTraceEntryToDefault resets the maximum number of trace entry per entity to default.
+func ResetMaxTraceEntryToDefault() {
+ atomic.StoreInt32(&maxTraceEntry, defaultMaxTraceEntry)
+}
+
+func getMaxTraceEntry() int {
+ i := atomic.LoadInt32(&maxTraceEntry)
+ return int(i)
+}
+
+// dbWarpper wraps around a reference to internal channelz data storage, and
+// provide synchronized functionality to set and get the reference.
+type dbWrapper struct {
+ mu sync.RWMutex
+ DB *channelMap
+}
+
+func (d *dbWrapper) set(db *channelMap) {
+ d.mu.Lock()
+ d.DB = db
+ d.mu.Unlock()
+}
+
+func (d *dbWrapper) get() *channelMap {
+ d.mu.RLock()
+ defer d.mu.RUnlock()
+ return d.DB
+}
+
+// NewChannelzStorage initializes channelz data storage and id generator.
+//
+// This function returns a cleanup function to wait for all channelz state to be reset by the
+// grpc goroutines when those entities get closed. By using this cleanup function, we make sure tests
+// don't mess up each other, i.e. lingering goroutine from previous test doing entity removal happen
+// to remove some entity just register by the new test, since the id space is the same.
+//
+// Note: This function is exported for testing purpose only. User should not call
+// it in most cases.
+func NewChannelzStorage() (cleanup func() error) {
+ db.set(&channelMap{
+ topLevelChannels: make(map[int64]struct{}),
+ channels: make(map[int64]*channel),
+ listenSockets: make(map[int64]*listenSocket),
+ normalSockets: make(map[int64]*normalSocket),
+ servers: make(map[int64]*server),
+ subChannels: make(map[int64]*subChannel),
+ })
+ idGen.reset()
+ return func() error {
+ var err error
+ cm := db.get()
+ if cm == nil {
+ return nil
+ }
+ for i := 0; i < 1000; i++ {
+ cm.mu.Lock()
+ if len(cm.topLevelChannels) == 0 && len(cm.servers) == 0 && len(cm.channels) == 0 && len(cm.subChannels) == 0 && len(cm.listenSockets) == 0 && len(cm.normalSockets) == 0 {
+ cm.mu.Unlock()
+ // all things stored in the channelz map have been cleared.
+ return nil
+ }
+ cm.mu.Unlock()
+ time.Sleep(10 * time.Millisecond)
+ }
+
+ cm.mu.Lock()
+ err = fmt.Errorf("after 10s the channelz map has not been cleaned up yet, topchannels: %d, servers: %d, channels: %d, subchannels: %d, listen sockets: %d, normal sockets: %d", len(cm.topLevelChannels), len(cm.servers), len(cm.channels), len(cm.subChannels), len(cm.listenSockets), len(cm.normalSockets))
+ cm.mu.Unlock()
+ return err
+ }
+}
+
+// GetTopChannels returns a slice of top channel's ChannelMetric, along with a
+// boolean indicating whether there's more top channels to be queried for.
+//
+// The arg id specifies that only top channel with id at or above it will be included
+// in the result. The returned slice is up to a length of the arg maxResults or
+// EntryPerPage if maxResults is zero, and is sorted in ascending id order.
+func GetTopChannels(id int64, maxResults int64) ([]*ChannelMetric, bool) {
+ return db.get().GetTopChannels(id, maxResults)
+}
+
+// GetServers returns a slice of server's ServerMetric, along with a
+// boolean indicating whether there's more servers to be queried for.
+//
+// The arg id specifies that only server with id at or above it will be included
+// in the result. The returned slice is up to a length of the arg maxResults or
+// EntryPerPage if maxResults is zero, and is sorted in ascending id order.
+func GetServers(id int64, maxResults int64) ([]*ServerMetric, bool) {
+ return db.get().GetServers(id, maxResults)
+}
+
+// GetServerSockets returns a slice of server's (identified by id) normal socket's
+// SocketMetric, along with a boolean indicating whether there's more sockets to
+// be queried for.
+//
+// The arg startID specifies that only sockets with id at or above it will be
+// included in the result. The returned slice is up to a length of the arg maxResults
+// or EntryPerPage if maxResults is zero, and is sorted in ascending id order.
+func GetServerSockets(id int64, startID int64, maxResults int64) ([]*SocketMetric, bool) {
+ return db.get().GetServerSockets(id, startID, maxResults)
+}
+
+// GetChannel returns the ChannelMetric for the channel (identified by id).
+func GetChannel(id int64) *ChannelMetric {
+ return db.get().GetChannel(id)
+}
+
+// GetSubChannel returns the SubChannelMetric for the subchannel (identified by id).
+func GetSubChannel(id int64) *SubChannelMetric {
+ return db.get().GetSubChannel(id)
+}
+
+// GetSocket returns the SocketInternalMetric for the socket (identified by id).
+func GetSocket(id int64) *SocketMetric {
+ return db.get().GetSocket(id)
+}
+
+// GetServer returns the ServerMetric for the server (identified by id).
+func GetServer(id int64) *ServerMetric {
+ return db.get().GetServer(id)
+}
+
+// RegisterChannel registers the given channel c in channelz database with ref
+// as its reference name, and add it to the child list of its parent (identified
+// by pid). pid = 0 means no parent. It returns the unique channelz tracking id
+// assigned to this channel.
+func RegisterChannel(c Channel, pid int64, ref string) int64 {
+ id := idGen.genID()
+ cn := &channel{
+ refName: ref,
+ c: c,
+ subChans: make(map[int64]string),
+ nestedChans: make(map[int64]string),
+ id: id,
+ pid: pid,
+ trace: &channelTrace{createdTime: time.Now(), events: make([]*TraceEvent, 0, getMaxTraceEntry())},
+ }
+ if pid == 0 {
+ db.get().addChannel(id, cn, true, pid, ref)
+ } else {
+ db.get().addChannel(id, cn, false, pid, ref)
+ }
+ return id
+}
+
+// RegisterSubChannel registers the given channel c in channelz database with ref
+// as its reference name, and add it to the child list of its parent (identified
+// by pid). It returns the unique channelz tracking id assigned to this subchannel.
+func RegisterSubChannel(c Channel, pid int64, ref string) int64 {
+ if pid == 0 {
+ grpclog.Error("a SubChannel's parent id cannot be 0")
+ return 0
+ }
+ id := idGen.genID()
+ sc := &subChannel{
+ refName: ref,
+ c: c,
+ sockets: make(map[int64]string),
+ id: id,
+ pid: pid,
+ trace: &channelTrace{createdTime: time.Now(), events: make([]*TraceEvent, 0, getMaxTraceEntry())},
+ }
+ db.get().addSubChannel(id, sc, pid, ref)
+ return id
+}
+
+// RegisterServer registers the given server s in channelz database. It returns
+// the unique channelz tracking id assigned to this server.
+func RegisterServer(s Server, ref string) int64 {
+ id := idGen.genID()
+ svr := &server{
+ refName: ref,
+ s: s,
+ sockets: make(map[int64]string),
+ listenSockets: make(map[int64]string),
+ id: id,
+ }
+ db.get().addServer(id, svr)
+ return id
+}
+
+// RegisterListenSocket registers the given listen socket s in channelz database
+// with ref as its reference name, and add it to the child list of its parent
+// (identified by pid). It returns the unique channelz tracking id assigned to
+// this listen socket.
+func RegisterListenSocket(s Socket, pid int64, ref string) int64 {
+ if pid == 0 {
+ grpclog.Error("a ListenSocket's parent id cannot be 0")
+ return 0
+ }
+ id := idGen.genID()
+ ls := &listenSocket{refName: ref, s: s, id: id, pid: pid}
+ db.get().addListenSocket(id, ls, pid, ref)
+ return id
+}
+
+// RegisterNormalSocket registers the given normal socket s in channelz database
+// with ref as its reference name, and add it to the child list of its parent
+// (identified by pid). It returns the unique channelz tracking id assigned to
+// this normal socket.
+func RegisterNormalSocket(s Socket, pid int64, ref string) int64 {
+ if pid == 0 {
+ grpclog.Error("a NormalSocket's parent id cannot be 0")
+ return 0
+ }
+ id := idGen.genID()
+ ns := &normalSocket{refName: ref, s: s, id: id, pid: pid}
+ db.get().addNormalSocket(id, ns, pid, ref)
+ return id
+}
+
+// RemoveEntry removes an entry with unique channelz trakcing id to be id from
+// channelz database.
+func RemoveEntry(id int64) {
+ db.get().removeEntry(id)
+}
+
+// TraceEventDesc is what the caller of AddTraceEvent should provide to describe the event to be added
+// to the channel trace.
+// The Parent field is optional. It is used for event that will be recorded in the entity's parent
+// trace also.
+type TraceEventDesc struct {
+ Desc string
+ Severity Severity
+ Parent *TraceEventDesc
+}
+
+// AddTraceEvent adds trace related to the entity with specified id, using the provided TraceEventDesc.
+func AddTraceEvent(id int64, desc *TraceEventDesc) {
+ if getMaxTraceEntry() == 0 {
+ return
+ }
+ db.get().traceEvent(id, desc)
+}
+
+// channelMap is the storage data structure for channelz.
+// Methods of channelMap can be divided in two two categories with respect to locking.
+// 1. Methods acquire the global lock.
+// 2. Methods that can only be called when global lock is held.
+// A second type of method need always to be called inside a first type of method.
+type channelMap struct {
+ mu sync.RWMutex
+ topLevelChannels map[int64]struct{}
+ servers map[int64]*server
+ channels map[int64]*channel
+ subChannels map[int64]*subChannel
+ listenSockets map[int64]*listenSocket
+ normalSockets map[int64]*normalSocket
+}
+
+func (c *channelMap) addServer(id int64, s *server) {
+ c.mu.Lock()
+ s.cm = c
+ c.servers[id] = s
+ c.mu.Unlock()
+}
+
+func (c *channelMap) addChannel(id int64, cn *channel, isTopChannel bool, pid int64, ref string) {
+ c.mu.Lock()
+ cn.cm = c
+ cn.trace.cm = c
+ c.channels[id] = cn
+ if isTopChannel {
+ c.topLevelChannels[id] = struct{}{}
+ } else {
+ c.findEntry(pid).addChild(id, cn)
+ }
+ c.mu.Unlock()
+}
+
+func (c *channelMap) addSubChannel(id int64, sc *subChannel, pid int64, ref string) {
+ c.mu.Lock()
+ sc.cm = c
+ sc.trace.cm = c
+ c.subChannels[id] = sc
+ c.findEntry(pid).addChild(id, sc)
+ c.mu.Unlock()
+}
+
+func (c *channelMap) addListenSocket(id int64, ls *listenSocket, pid int64, ref string) {
+ c.mu.Lock()
+ ls.cm = c
+ c.listenSockets[id] = ls
+ c.findEntry(pid).addChild(id, ls)
+ c.mu.Unlock()
+}
+
+func (c *channelMap) addNormalSocket(id int64, ns *normalSocket, pid int64, ref string) {
+ c.mu.Lock()
+ ns.cm = c
+ c.normalSockets[id] = ns
+ c.findEntry(pid).addChild(id, ns)
+ c.mu.Unlock()
+}
+
+// removeEntry triggers the removal of an entry, which may not indeed delete the entry, if it has to
+// wait on the deletion of its children and until no other entity's channel trace references it.
+// It may lead to a chain of entry deletion. For example, deleting the last socket of a gracefully
+// shutting down server will lead to the server being also deleted.
+func (c *channelMap) removeEntry(id int64) {
+ c.mu.Lock()
+ c.findEntry(id).triggerDelete()
+ c.mu.Unlock()
+}
+
+// c.mu must be held by the caller
+func (c *channelMap) decrTraceRefCount(id int64) {
+ e := c.findEntry(id)
+ if v, ok := e.(tracedChannel); ok {
+ v.decrTraceRefCount()
+ e.deleteSelfIfReady()
+ }
+}
+
+// c.mu must be held by the caller.
+func (c *channelMap) findEntry(id int64) entry {
+ var v entry
+ var ok bool
+ if v, ok = c.channels[id]; ok {
+ return v
+ }
+ if v, ok = c.subChannels[id]; ok {
+ return v
+ }
+ if v, ok = c.servers[id]; ok {
+ return v
+ }
+ if v, ok = c.listenSockets[id]; ok {
+ return v
+ }
+ if v, ok = c.normalSockets[id]; ok {
+ return v
+ }
+ return &dummyEntry{idNotFound: id}
+}
+
+// c.mu must be held by the caller
+// deleteEntry simply deletes an entry from the channelMap. Before calling this
+// method, caller must check this entry is ready to be deleted, i.e removeEntry()
+// has been called on it, and no children still exist.
+// Conditionals are ordered by the expected frequency of deletion of each entity
+// type, in order to optimize performance.
+func (c *channelMap) deleteEntry(id int64) {
+ var ok bool
+ if _, ok = c.normalSockets[id]; ok {
+ delete(c.normalSockets, id)
+ return
+ }
+ if _, ok = c.subChannels[id]; ok {
+ delete(c.subChannels, id)
+ return
+ }
+ if _, ok = c.channels[id]; ok {
+ delete(c.channels, id)
+ delete(c.topLevelChannels, id)
+ return
+ }
+ if _, ok = c.listenSockets[id]; ok {
+ delete(c.listenSockets, id)
+ return
+ }
+ if _, ok = c.servers[id]; ok {
+ delete(c.servers, id)
+ return
+ }
+}
+
+func (c *channelMap) traceEvent(id int64, desc *TraceEventDesc) {
+ c.mu.Lock()
+ child := c.findEntry(id)
+ childTC, ok := child.(tracedChannel)
+ if !ok {
+ c.mu.Unlock()
+ return
+ }
+ childTC.getChannelTrace().append(&TraceEvent{Desc: desc.Desc, Severity: desc.Severity, Timestamp: time.Now()})
+ if desc.Parent != nil {
+ parent := c.findEntry(child.getParentID())
+ var chanType RefChannelType
+ switch child.(type) {
+ case *channel:
+ chanType = RefChannel
+ case *subChannel:
+ chanType = RefSubChannel
+ }
+ if parentTC, ok := parent.(tracedChannel); ok {
+ parentTC.getChannelTrace().append(&TraceEvent{
+ Desc: desc.Parent.Desc,
+ Severity: desc.Parent.Severity,
+ Timestamp: time.Now(),
+ RefID: id,
+ RefName: childTC.getRefName(),
+ RefType: chanType,
+ })
+ childTC.incrTraceRefCount()
+ }
+ }
+ c.mu.Unlock()
+}
+
+type int64Slice []int64
+
+func (s int64Slice) Len() int { return len(s) }
+func (s int64Slice) Swap(i, j int) { s[i], s[j] = s[j], s[i] }
+func (s int64Slice) Less(i, j int) bool { return s[i] < s[j] }
+
+func copyMap(m map[int64]string) map[int64]string {
+ n := make(map[int64]string)
+ for k, v := range m {
+ n[k] = v
+ }
+ return n
+}
+
+func min(a, b int64) int64 {
+ if a < b {
+ return a
+ }
+ return b
+}
+
+func (c *channelMap) GetTopChannels(id int64, maxResults int64) ([]*ChannelMetric, bool) {
+ if maxResults <= 0 {
+ maxResults = EntryPerPage
+ }
+ c.mu.RLock()
+ l := int64(len(c.topLevelChannels))
+ ids := make([]int64, 0, l)
+ cns := make([]*channel, 0, min(l, maxResults))
+
+ for k := range c.topLevelChannels {
+ ids = append(ids, k)
+ }
+ sort.Sort(int64Slice(ids))
+ idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= id })
+ count := int64(0)
+ var end bool
+ var t []*ChannelMetric
+ for i, v := range ids[idx:] {
+ if count == maxResults {
+ break
+ }
+ if cn, ok := c.channels[v]; ok {
+ cns = append(cns, cn)
+ t = append(t, &ChannelMetric{
+ NestedChans: copyMap(cn.nestedChans),
+ SubChans: copyMap(cn.subChans),
+ })
+ count++
+ }
+ if i == len(ids[idx:])-1 {
+ end = true
+ break
+ }
+ }
+ c.mu.RUnlock()
+ if count == 0 {
+ end = true
+ }
+
+ for i, cn := range cns {
+ t[i].ChannelData = cn.c.ChannelzMetric()
+ t[i].ID = cn.id
+ t[i].RefName = cn.refName
+ t[i].Trace = cn.trace.dumpData()
+ }
+ return t, end
+}
+
+func (c *channelMap) GetServers(id, maxResults int64) ([]*ServerMetric, bool) {
+ if maxResults <= 0 {
+ maxResults = EntryPerPage
+ }
+ c.mu.RLock()
+ l := int64(len(c.servers))
+ ids := make([]int64, 0, l)
+ ss := make([]*server, 0, min(l, maxResults))
+ for k := range c.servers {
+ ids = append(ids, k)
+ }
+ sort.Sort(int64Slice(ids))
+ idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= id })
+ count := int64(0)
+ var end bool
+ var s []*ServerMetric
+ for i, v := range ids[idx:] {
+ if count == maxResults {
+ break
+ }
+ if svr, ok := c.servers[v]; ok {
+ ss = append(ss, svr)
+ s = append(s, &ServerMetric{
+ ListenSockets: copyMap(svr.listenSockets),
+ })
+ count++
+ }
+ if i == len(ids[idx:])-1 {
+ end = true
+ break
+ }
+ }
+ c.mu.RUnlock()
+ if count == 0 {
+ end = true
+ }
+
+ for i, svr := range ss {
+ s[i].ServerData = svr.s.ChannelzMetric()
+ s[i].ID = svr.id
+ s[i].RefName = svr.refName
+ }
+ return s, end
+}
+
+func (c *channelMap) GetServerSockets(id int64, startID int64, maxResults int64) ([]*SocketMetric, bool) {
+ if maxResults <= 0 {
+ maxResults = EntryPerPage
+ }
+ var svr *server
+ var ok bool
+ c.mu.RLock()
+ if svr, ok = c.servers[id]; !ok {
+ // server with id doesn't exist.
+ c.mu.RUnlock()
+ return nil, true
+ }
+ svrskts := svr.sockets
+ l := int64(len(svrskts))
+ ids := make([]int64, 0, l)
+ sks := make([]*normalSocket, 0, min(l, maxResults))
+ for k := range svrskts {
+ ids = append(ids, k)
+ }
+ sort.Sort(int64Slice(ids))
+ idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= startID })
+ count := int64(0)
+ var end bool
+ for i, v := range ids[idx:] {
+ if count == maxResults {
+ break
+ }
+ if ns, ok := c.normalSockets[v]; ok {
+ sks = append(sks, ns)
+ count++
+ }
+ if i == len(ids[idx:])-1 {
+ end = true
+ break
+ }
+ }
+ c.mu.RUnlock()
+ if count == 0 {
+ end = true
+ }
+ var s []*SocketMetric
+ for _, ns := range sks {
+ sm := &SocketMetric{}
+ sm.SocketData = ns.s.ChannelzMetric()
+ sm.ID = ns.id
+ sm.RefName = ns.refName
+ s = append(s, sm)
+ }
+ return s, end
+}
+
+func (c *channelMap) GetChannel(id int64) *ChannelMetric {
+ cm := &ChannelMetric{}
+ var cn *channel
+ var ok bool
+ c.mu.RLock()
+ if cn, ok = c.channels[id]; !ok {
+ // channel with id doesn't exist.
+ c.mu.RUnlock()
+ return nil
+ }
+ cm.NestedChans = copyMap(cn.nestedChans)
+ cm.SubChans = copyMap(cn.subChans)
+ // cn.c can be set to &dummyChannel{} when deleteSelfFromMap is called. Save a copy of cn.c when
+ // holding the lock to prevent potential data race.
+ chanCopy := cn.c
+ c.mu.RUnlock()
+ cm.ChannelData = chanCopy.ChannelzMetric()
+ cm.ID = cn.id
+ cm.RefName = cn.refName
+ cm.Trace = cn.trace.dumpData()
+ return cm
+}
+
+func (c *channelMap) GetSubChannel(id int64) *SubChannelMetric {
+ cm := &SubChannelMetric{}
+ var sc *subChannel
+ var ok bool
+ c.mu.RLock()
+ if sc, ok = c.subChannels[id]; !ok {
+ // subchannel with id doesn't exist.
+ c.mu.RUnlock()
+ return nil
+ }
+ cm.Sockets = copyMap(sc.sockets)
+ // sc.c can be set to &dummyChannel{} when deleteSelfFromMap is called. Save a copy of sc.c when
+ // holding the lock to prevent potential data race.
+ chanCopy := sc.c
+ c.mu.RUnlock()
+ cm.ChannelData = chanCopy.ChannelzMetric()
+ cm.ID = sc.id
+ cm.RefName = sc.refName
+ cm.Trace = sc.trace.dumpData()
+ return cm
+}
+
+func (c *channelMap) GetSocket(id int64) *SocketMetric {
+ sm := &SocketMetric{}
+ c.mu.RLock()
+ if ls, ok := c.listenSockets[id]; ok {
+ c.mu.RUnlock()
+ sm.SocketData = ls.s.ChannelzMetric()
+ sm.ID = ls.id
+ sm.RefName = ls.refName
+ return sm
+ }
+ if ns, ok := c.normalSockets[id]; ok {
+ c.mu.RUnlock()
+ sm.SocketData = ns.s.ChannelzMetric()
+ sm.ID = ns.id
+ sm.RefName = ns.refName
+ return sm
+ }
+ c.mu.RUnlock()
+ return nil
+}
+
+func (c *channelMap) GetServer(id int64) *ServerMetric {
+ sm := &ServerMetric{}
+ var svr *server
+ var ok bool
+ c.mu.RLock()
+ if svr, ok = c.servers[id]; !ok {
+ c.mu.RUnlock()
+ return nil
+ }
+ sm.ListenSockets = copyMap(svr.listenSockets)
+ c.mu.RUnlock()
+ sm.ID = svr.id
+ sm.RefName = svr.refName
+ sm.ServerData = svr.s.ChannelzMetric()
+ return sm
+}
+
+type idGenerator struct {
+ id int64
+}
+
+func (i *idGenerator) reset() {
+ atomic.StoreInt64(&i.id, 0)
+}
+
+func (i *idGenerator) genID() int64 {
+ return atomic.AddInt64(&i.id, 1)
+}
diff --git a/vendor/google.golang.org/grpc/internal/channelz/types.go b/vendor/google.golang.org/grpc/internal/channelz/types.go
new file mode 100644
index 0000000..17c2274
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/channelz/types.go
@@ -0,0 +1,702 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+import (
+ "net"
+ "sync"
+ "sync/atomic"
+ "time"
+
+ "google.golang.org/grpc/connectivity"
+ "google.golang.org/grpc/credentials"
+ "google.golang.org/grpc/grpclog"
+)
+
+// entry represents a node in the channelz database.
+type entry interface {
+ // addChild adds a child e, whose channelz id is id to child list
+ addChild(id int64, e entry)
+ // deleteChild deletes a child with channelz id to be id from child list
+ deleteChild(id int64)
+ // triggerDelete tries to delete self from channelz database. However, if child
+ // list is not empty, then deletion from the database is on hold until the last
+ // child is deleted from database.
+ triggerDelete()
+ // deleteSelfIfReady check whether triggerDelete() has been called before, and whether child
+ // list is now empty. If both conditions are met, then delete self from database.
+ deleteSelfIfReady()
+ // getParentID returns parent ID of the entry. 0 value parent ID means no parent.
+ getParentID() int64
+}
+
+// dummyEntry is a fake entry to handle entry not found case.
+type dummyEntry struct {
+ idNotFound int64
+}
+
+func (d *dummyEntry) addChild(id int64, e entry) {
+ // Note: It is possible for a normal program to reach here under race condition.
+ // For example, there could be a race between ClientConn.Close() info being propagated
+ // to addrConn and http2Client. ClientConn.Close() cancel the context and result
+ // in http2Client to error. The error info is then caught by transport monitor
+ // and before addrConn.tearDown() is called in side ClientConn.Close(). Therefore,
+ // the addrConn will create a new transport. And when registering the new transport in
+ // channelz, its parent addrConn could have already been torn down and deleted
+ // from channelz tracking, and thus reach the code here.
+ grpclog.Infof("attempt to add child of type %T with id %d to a parent (id=%d) that doesn't currently exist", e, id, d.idNotFound)
+}
+
+func (d *dummyEntry) deleteChild(id int64) {
+ // It is possible for a normal program to reach here under race condition.
+ // Refer to the example described in addChild().
+ grpclog.Infof("attempt to delete child with id %d from a parent (id=%d) that doesn't currently exist", id, d.idNotFound)
+}
+
+func (d *dummyEntry) triggerDelete() {
+ grpclog.Warningf("attempt to delete an entry (id=%d) that doesn't currently exist", d.idNotFound)
+}
+
+func (*dummyEntry) deleteSelfIfReady() {
+ // code should not reach here. deleteSelfIfReady is always called on an existing entry.
+}
+
+func (*dummyEntry) getParentID() int64 {
+ return 0
+}
+
+// ChannelMetric defines the info channelz provides for a specific Channel, which
+// includes ChannelInternalMetric and channelz-specific data, such as channelz id,
+// child list, etc.
+type ChannelMetric struct {
+ // ID is the channelz id of this channel.
+ ID int64
+ // RefName is the human readable reference string of this channel.
+ RefName string
+ // ChannelData contains channel internal metric reported by the channel through
+ // ChannelzMetric().
+ ChannelData *ChannelInternalMetric
+ // NestedChans tracks the nested channel type children of this channel in the format of
+ // a map from nested channel channelz id to corresponding reference string.
+ NestedChans map[int64]string
+ // SubChans tracks the subchannel type children of this channel in the format of a
+ // map from subchannel channelz id to corresponding reference string.
+ SubChans map[int64]string
+ // Sockets tracks the socket type children of this channel in the format of a map
+ // from socket channelz id to corresponding reference string.
+ // Note current grpc implementation doesn't allow channel having sockets directly,
+ // therefore, this is field is unused.
+ Sockets map[int64]string
+ // Trace contains the most recent traced events.
+ Trace *ChannelTrace
+}
+
+// SubChannelMetric defines the info channelz provides for a specific SubChannel,
+// which includes ChannelInternalMetric and channelz-specific data, such as
+// channelz id, child list, etc.
+type SubChannelMetric struct {
+ // ID is the channelz id of this subchannel.
+ ID int64
+ // RefName is the human readable reference string of this subchannel.
+ RefName string
+ // ChannelData contains subchannel internal metric reported by the subchannel
+ // through ChannelzMetric().
+ ChannelData *ChannelInternalMetric
+ // NestedChans tracks the nested channel type children of this subchannel in the format of
+ // a map from nested channel channelz id to corresponding reference string.
+ // Note current grpc implementation doesn't allow subchannel to have nested channels
+ // as children, therefore, this field is unused.
+ NestedChans map[int64]string
+ // SubChans tracks the subchannel type children of this subchannel in the format of a
+ // map from subchannel channelz id to corresponding reference string.
+ // Note current grpc implementation doesn't allow subchannel to have subchannels
+ // as children, therefore, this field is unused.
+ SubChans map[int64]string
+ // Sockets tracks the socket type children of this subchannel in the format of a map
+ // from socket channelz id to corresponding reference string.
+ Sockets map[int64]string
+ // Trace contains the most recent traced events.
+ Trace *ChannelTrace
+}
+
+// ChannelInternalMetric defines the struct that the implementor of Channel interface
+// should return from ChannelzMetric().
+type ChannelInternalMetric struct {
+ // current connectivity state of the channel.
+ State connectivity.State
+ // The target this channel originally tried to connect to. May be absent
+ Target string
+ // The number of calls started on the channel.
+ CallsStarted int64
+ // The number of calls that have completed with an OK status.
+ CallsSucceeded int64
+ // The number of calls that have a completed with a non-OK status.
+ CallsFailed int64
+ // The last time a call was started on the channel.
+ LastCallStartedTimestamp time.Time
+}
+
+// ChannelTrace stores traced events on a channel/subchannel and related info.
+type ChannelTrace struct {
+ // EventNum is the number of events that ever got traced (i.e. including those that have been deleted)
+ EventNum int64
+ // CreationTime is the creation time of the trace.
+ CreationTime time.Time
+ // Events stores the most recent trace events (up to $maxTraceEntry, newer event will overwrite the
+ // oldest one)
+ Events []*TraceEvent
+}
+
+// TraceEvent represent a single trace event
+type TraceEvent struct {
+ // Desc is a simple description of the trace event.
+ Desc string
+ // Severity states the severity of this trace event.
+ Severity Severity
+ // Timestamp is the event time.
+ Timestamp time.Time
+ // RefID is the id of the entity that gets referenced in the event. RefID is 0 if no other entity is
+ // involved in this event.
+ // e.g. SubChannel (id: 4[]) Created. --> RefID = 4, RefName = "" (inside [])
+ RefID int64
+ // RefName is the reference name for the entity that gets referenced in the event.
+ RefName string
+ // RefType indicates the referenced entity type, i.e Channel or SubChannel.
+ RefType RefChannelType
+}
+
+// Channel is the interface that should be satisfied in order to be tracked by
+// channelz as Channel or SubChannel.
+type Channel interface {
+ ChannelzMetric() *ChannelInternalMetric
+}
+
+type dummyChannel struct{}
+
+func (d *dummyChannel) ChannelzMetric() *ChannelInternalMetric {
+ return &ChannelInternalMetric{}
+}
+
+type channel struct {
+ refName string
+ c Channel
+ closeCalled bool
+ nestedChans map[int64]string
+ subChans map[int64]string
+ id int64
+ pid int64
+ cm *channelMap
+ trace *channelTrace
+ // traceRefCount is the number of trace events that reference this channel.
+ // Non-zero traceRefCount means the trace of this channel cannot be deleted.
+ traceRefCount int32
+}
+
+func (c *channel) addChild(id int64, e entry) {
+ switch v := e.(type) {
+ case *subChannel:
+ c.subChans[id] = v.refName
+ case *channel:
+ c.nestedChans[id] = v.refName
+ default:
+ grpclog.Errorf("cannot add a child (id = %d) of type %T to a channel", id, e)
+ }
+}
+
+func (c *channel) deleteChild(id int64) {
+ delete(c.subChans, id)
+ delete(c.nestedChans, id)
+ c.deleteSelfIfReady()
+}
+
+func (c *channel) triggerDelete() {
+ c.closeCalled = true
+ c.deleteSelfIfReady()
+}
+
+func (c *channel) getParentID() int64 {
+ return c.pid
+}
+
+// deleteSelfFromTree tries to delete the channel from the channelz entry relation tree, which means
+// deleting the channel reference from its parent's child list.
+//
+// In order for a channel to be deleted from the tree, it must meet the criteria that, removal of the
+// corresponding grpc object has been invoked, and the channel does not have any children left.
+//
+// The returned boolean value indicates whether the channel has been successfully deleted from tree.
+func (c *channel) deleteSelfFromTree() (deleted bool) {
+ if !c.closeCalled || len(c.subChans)+len(c.nestedChans) != 0 {
+ return false
+ }
+ // not top channel
+ if c.pid != 0 {
+ c.cm.findEntry(c.pid).deleteChild(c.id)
+ }
+ return true
+}
+
+// deleteSelfFromMap checks whether it is valid to delete the channel from the map, which means
+// deleting the channel from channelz's tracking entirely. Users can no longer use id to query the
+// channel, and its memory will be garbage collected.
+//
+// The trace reference count of the channel must be 0 in order to be deleted from the map. This is
+// specified in the channel tracing gRFC that as long as some other trace has reference to an entity,
+// the trace of the referenced entity must not be deleted. In order to release the resource allocated
+// by grpc, the reference to the grpc object is reset to a dummy object.
+//
+// deleteSelfFromMap must be called after deleteSelfFromTree returns true.
+//
+// It returns a bool to indicate whether the channel can be safely deleted from map.
+func (c *channel) deleteSelfFromMap() (delete bool) {
+ if c.getTraceRefCount() != 0 {
+ c.c = &dummyChannel{}
+ return false
+ }
+ return true
+}
+
+// deleteSelfIfReady tries to delete the channel itself from the channelz database.
+// The delete process includes two steps:
+// 1. delete the channel from the entry relation tree, i.e. delete the channel reference from its
+// parent's child list.
+// 2. delete the channel from the map, i.e. delete the channel entirely from channelz. Lookup by id
+// will return entry not found error.
+func (c *channel) deleteSelfIfReady() {
+ if !c.deleteSelfFromTree() {
+ return
+ }
+ if !c.deleteSelfFromMap() {
+ return
+ }
+ c.cm.deleteEntry(c.id)
+ c.trace.clear()
+}
+
+func (c *channel) getChannelTrace() *channelTrace {
+ return c.trace
+}
+
+func (c *channel) incrTraceRefCount() {
+ atomic.AddInt32(&c.traceRefCount, 1)
+}
+
+func (c *channel) decrTraceRefCount() {
+ atomic.AddInt32(&c.traceRefCount, -1)
+}
+
+func (c *channel) getTraceRefCount() int {
+ i := atomic.LoadInt32(&c.traceRefCount)
+ return int(i)
+}
+
+func (c *channel) getRefName() string {
+ return c.refName
+}
+
+type subChannel struct {
+ refName string
+ c Channel
+ closeCalled bool
+ sockets map[int64]string
+ id int64
+ pid int64
+ cm *channelMap
+ trace *channelTrace
+ traceRefCount int32
+}
+
+func (sc *subChannel) addChild(id int64, e entry) {
+ if v, ok := e.(*normalSocket); ok {
+ sc.sockets[id] = v.refName
+ } else {
+ grpclog.Errorf("cannot add a child (id = %d) of type %T to a subChannel", id, e)
+ }
+}
+
+func (sc *subChannel) deleteChild(id int64) {
+ delete(sc.sockets, id)
+ sc.deleteSelfIfReady()
+}
+
+func (sc *subChannel) triggerDelete() {
+ sc.closeCalled = true
+ sc.deleteSelfIfReady()
+}
+
+func (sc *subChannel) getParentID() int64 {
+ return sc.pid
+}
+
+// deleteSelfFromTree tries to delete the subchannel from the channelz entry relation tree, which
+// means deleting the subchannel reference from its parent's child list.
+//
+// In order for a subchannel to be deleted from the tree, it must meet the criteria that, removal of
+// the corresponding grpc object has been invoked, and the subchannel does not have any children left.
+//
+// The returned boolean value indicates whether the channel has been successfully deleted from tree.
+func (sc *subChannel) deleteSelfFromTree() (deleted bool) {
+ if !sc.closeCalled || len(sc.sockets) != 0 {
+ return false
+ }
+ sc.cm.findEntry(sc.pid).deleteChild(sc.id)
+ return true
+}
+
+// deleteSelfFromMap checks whether it is valid to delete the subchannel from the map, which means
+// deleting the subchannel from channelz's tracking entirely. Users can no longer use id to query
+// the subchannel, and its memory will be garbage collected.
+//
+// The trace reference count of the subchannel must be 0 in order to be deleted from the map. This is
+// specified in the channel tracing gRFC that as long as some other trace has reference to an entity,
+// the trace of the referenced entity must not be deleted. In order to release the resource allocated
+// by grpc, the reference to the grpc object is reset to a dummy object.
+//
+// deleteSelfFromMap must be called after deleteSelfFromTree returns true.
+//
+// It returns a bool to indicate whether the channel can be safely deleted from map.
+func (sc *subChannel) deleteSelfFromMap() (delete bool) {
+ if sc.getTraceRefCount() != 0 {
+ // free the grpc struct (i.e. addrConn)
+ sc.c = &dummyChannel{}
+ return false
+ }
+ return true
+}
+
+// deleteSelfIfReady tries to delete the subchannel itself from the channelz database.
+// The delete process includes two steps:
+// 1. delete the subchannel from the entry relation tree, i.e. delete the subchannel reference from
+// its parent's child list.
+// 2. delete the subchannel from the map, i.e. delete the subchannel entirely from channelz. Lookup
+// by id will return entry not found error.
+func (sc *subChannel) deleteSelfIfReady() {
+ if !sc.deleteSelfFromTree() {
+ return
+ }
+ if !sc.deleteSelfFromMap() {
+ return
+ }
+ sc.cm.deleteEntry(sc.id)
+ sc.trace.clear()
+}
+
+func (sc *subChannel) getChannelTrace() *channelTrace {
+ return sc.trace
+}
+
+func (sc *subChannel) incrTraceRefCount() {
+ atomic.AddInt32(&sc.traceRefCount, 1)
+}
+
+func (sc *subChannel) decrTraceRefCount() {
+ atomic.AddInt32(&sc.traceRefCount, -1)
+}
+
+func (sc *subChannel) getTraceRefCount() int {
+ i := atomic.LoadInt32(&sc.traceRefCount)
+ return int(i)
+}
+
+func (sc *subChannel) getRefName() string {
+ return sc.refName
+}
+
+// SocketMetric defines the info channelz provides for a specific Socket, which
+// includes SocketInternalMetric and channelz-specific data, such as channelz id, etc.
+type SocketMetric struct {
+ // ID is the channelz id of this socket.
+ ID int64
+ // RefName is the human readable reference string of this socket.
+ RefName string
+ // SocketData contains socket internal metric reported by the socket through
+ // ChannelzMetric().
+ SocketData *SocketInternalMetric
+}
+
+// SocketInternalMetric defines the struct that the implementor of Socket interface
+// should return from ChannelzMetric().
+type SocketInternalMetric struct {
+ // The number of streams that have been started.
+ StreamsStarted int64
+ // The number of streams that have ended successfully:
+ // On client side, receiving frame with eos bit set.
+ // On server side, sending frame with eos bit set.
+ StreamsSucceeded int64
+ // The number of streams that have ended unsuccessfully:
+ // On client side, termination without receiving frame with eos bit set.
+ // On server side, termination without sending frame with eos bit set.
+ StreamsFailed int64
+ // The number of messages successfully sent on this socket.
+ MessagesSent int64
+ MessagesReceived int64
+ // The number of keep alives sent. This is typically implemented with HTTP/2
+ // ping messages.
+ KeepAlivesSent int64
+ // The last time a stream was created by this endpoint. Usually unset for
+ // servers.
+ LastLocalStreamCreatedTimestamp time.Time
+ // The last time a stream was created by the remote endpoint. Usually unset
+ // for clients.
+ LastRemoteStreamCreatedTimestamp time.Time
+ // The last time a message was sent by this endpoint.
+ LastMessageSentTimestamp time.Time
+ // The last time a message was received by this endpoint.
+ LastMessageReceivedTimestamp time.Time
+ // The amount of window, granted to the local endpoint by the remote endpoint.
+ // This may be slightly out of date due to network latency. This does NOT
+ // include stream level or TCP level flow control info.
+ LocalFlowControlWindow int64
+ // The amount of window, granted to the remote endpoint by the local endpoint.
+ // This may be slightly out of date due to network latency. This does NOT
+ // include stream level or TCP level flow control info.
+ RemoteFlowControlWindow int64
+ // The locally bound address.
+ LocalAddr net.Addr
+ // The remote bound address. May be absent.
+ RemoteAddr net.Addr
+ // Optional, represents the name of the remote endpoint, if different than
+ // the original target name.
+ RemoteName string
+ SocketOptions *SocketOptionData
+ Security credentials.ChannelzSecurityValue
+}
+
+// Socket is the interface that should be satisfied in order to be tracked by
+// channelz as Socket.
+type Socket interface {
+ ChannelzMetric() *SocketInternalMetric
+}
+
+type listenSocket struct {
+ refName string
+ s Socket
+ id int64
+ pid int64
+ cm *channelMap
+}
+
+func (ls *listenSocket) addChild(id int64, e entry) {
+ grpclog.Errorf("cannot add a child (id = %d) of type %T to a listen socket", id, e)
+}
+
+func (ls *listenSocket) deleteChild(id int64) {
+ grpclog.Errorf("cannot delete a child (id = %d) from a listen socket", id)
+}
+
+func (ls *listenSocket) triggerDelete() {
+ ls.cm.deleteEntry(ls.id)
+ ls.cm.findEntry(ls.pid).deleteChild(ls.id)
+}
+
+func (ls *listenSocket) deleteSelfIfReady() {
+ grpclog.Errorf("cannot call deleteSelfIfReady on a listen socket")
+}
+
+func (ls *listenSocket) getParentID() int64 {
+ return ls.pid
+}
+
+type normalSocket struct {
+ refName string
+ s Socket
+ id int64
+ pid int64
+ cm *channelMap
+}
+
+func (ns *normalSocket) addChild(id int64, e entry) {
+ grpclog.Errorf("cannot add a child (id = %d) of type %T to a normal socket", id, e)
+}
+
+func (ns *normalSocket) deleteChild(id int64) {
+ grpclog.Errorf("cannot delete a child (id = %d) from a normal socket", id)
+}
+
+func (ns *normalSocket) triggerDelete() {
+ ns.cm.deleteEntry(ns.id)
+ ns.cm.findEntry(ns.pid).deleteChild(ns.id)
+}
+
+func (ns *normalSocket) deleteSelfIfReady() {
+ grpclog.Errorf("cannot call deleteSelfIfReady on a normal socket")
+}
+
+func (ns *normalSocket) getParentID() int64 {
+ return ns.pid
+}
+
+// ServerMetric defines the info channelz provides for a specific Server, which
+// includes ServerInternalMetric and channelz-specific data, such as channelz id,
+// child list, etc.
+type ServerMetric struct {
+ // ID is the channelz id of this server.
+ ID int64
+ // RefName is the human readable reference string of this server.
+ RefName string
+ // ServerData contains server internal metric reported by the server through
+ // ChannelzMetric().
+ ServerData *ServerInternalMetric
+ // ListenSockets tracks the listener socket type children of this server in the
+ // format of a map from socket channelz id to corresponding reference string.
+ ListenSockets map[int64]string
+}
+
+// ServerInternalMetric defines the struct that the implementor of Server interface
+// should return from ChannelzMetric().
+type ServerInternalMetric struct {
+ // The number of incoming calls started on the server.
+ CallsStarted int64
+ // The number of incoming calls that have completed with an OK status.
+ CallsSucceeded int64
+ // The number of incoming calls that have a completed with a non-OK status.
+ CallsFailed int64
+ // The last time a call was started on the server.
+ LastCallStartedTimestamp time.Time
+}
+
+// Server is the interface to be satisfied in order to be tracked by channelz as
+// Server.
+type Server interface {
+ ChannelzMetric() *ServerInternalMetric
+}
+
+type server struct {
+ refName string
+ s Server
+ closeCalled bool
+ sockets map[int64]string
+ listenSockets map[int64]string
+ id int64
+ cm *channelMap
+}
+
+func (s *server) addChild(id int64, e entry) {
+ switch v := e.(type) {
+ case *normalSocket:
+ s.sockets[id] = v.refName
+ case *listenSocket:
+ s.listenSockets[id] = v.refName
+ default:
+ grpclog.Errorf("cannot add a child (id = %d) of type %T to a server", id, e)
+ }
+}
+
+func (s *server) deleteChild(id int64) {
+ delete(s.sockets, id)
+ delete(s.listenSockets, id)
+ s.deleteSelfIfReady()
+}
+
+func (s *server) triggerDelete() {
+ s.closeCalled = true
+ s.deleteSelfIfReady()
+}
+
+func (s *server) deleteSelfIfReady() {
+ if !s.closeCalled || len(s.sockets)+len(s.listenSockets) != 0 {
+ return
+ }
+ s.cm.deleteEntry(s.id)
+}
+
+func (s *server) getParentID() int64 {
+ return 0
+}
+
+type tracedChannel interface {
+ getChannelTrace() *channelTrace
+ incrTraceRefCount()
+ decrTraceRefCount()
+ getRefName() string
+}
+
+type channelTrace struct {
+ cm *channelMap
+ createdTime time.Time
+ eventCount int64
+ mu sync.Mutex
+ events []*TraceEvent
+}
+
+func (c *channelTrace) append(e *TraceEvent) {
+ c.mu.Lock()
+ if len(c.events) == getMaxTraceEntry() {
+ del := c.events[0]
+ c.events = c.events[1:]
+ if del.RefID != 0 {
+ // start recursive cleanup in a goroutine to not block the call originated from grpc.
+ go func() {
+ // need to acquire c.cm.mu lock to call the unlocked attemptCleanup func.
+ c.cm.mu.Lock()
+ c.cm.decrTraceRefCount(del.RefID)
+ c.cm.mu.Unlock()
+ }()
+ }
+ }
+ e.Timestamp = time.Now()
+ c.events = append(c.events, e)
+ c.eventCount++
+ c.mu.Unlock()
+}
+
+func (c *channelTrace) clear() {
+ c.mu.Lock()
+ for _, e := range c.events {
+ if e.RefID != 0 {
+ // caller should have already held the c.cm.mu lock.
+ c.cm.decrTraceRefCount(e.RefID)
+ }
+ }
+ c.mu.Unlock()
+}
+
+// Severity is the severity level of a trace event.
+// The canonical enumeration of all valid values is here:
+// https://github.com/grpc/grpc-proto/blob/9b13d199cc0d4703c7ea26c9c330ba695866eb23/grpc/channelz/v1/channelz.proto#L126.
+type Severity int
+
+const (
+ // CtUNKNOWN indicates unknown severity of a trace event.
+ CtUNKNOWN Severity = iota
+ // CtINFO indicates info level severity of a trace event.
+ CtINFO
+ // CtWarning indicates warning level severity of a trace event.
+ CtWarning
+ // CtError indicates error level severity of a trace event.
+ CtError
+)
+
+// RefChannelType is the type of the entity being referenced in a trace event.
+type RefChannelType int
+
+const (
+ // RefChannel indicates the referenced entity is a Channel.
+ RefChannel RefChannelType = iota
+ // RefSubChannel indicates the referenced entity is a SubChannel.
+ RefSubChannel
+)
+
+func (c *channelTrace) dumpData() *ChannelTrace {
+ c.mu.Lock()
+ ct := &ChannelTrace{EventNum: c.eventCount, CreationTime: c.createdTime}
+ ct.Events = c.events[:len(c.events)]
+ c.mu.Unlock()
+ return ct
+}
diff --git a/vendor/google.golang.org/grpc/internal/channelz/types_linux.go b/vendor/google.golang.org/grpc/internal/channelz/types_linux.go
new file mode 100644
index 0000000..692dd61
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/channelz/types_linux.go
@@ -0,0 +1,53 @@
+// +build !appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+import (
+ "syscall"
+
+ "golang.org/x/sys/unix"
+)
+
+// SocketOptionData defines the struct to hold socket option data, and related
+// getter function to obtain info from fd.
+type SocketOptionData struct {
+ Linger *unix.Linger
+ RecvTimeout *unix.Timeval
+ SendTimeout *unix.Timeval
+ TCPInfo *unix.TCPInfo
+}
+
+// Getsockopt defines the function to get socket options requested by channelz.
+// It is to be passed to syscall.RawConn.Control().
+func (s *SocketOptionData) Getsockopt(fd uintptr) {
+ if v, err := unix.GetsockoptLinger(int(fd), syscall.SOL_SOCKET, syscall.SO_LINGER); err == nil {
+ s.Linger = v
+ }
+ if v, err := unix.GetsockoptTimeval(int(fd), syscall.SOL_SOCKET, syscall.SO_RCVTIMEO); err == nil {
+ s.RecvTimeout = v
+ }
+ if v, err := unix.GetsockoptTimeval(int(fd), syscall.SOL_SOCKET, syscall.SO_SNDTIMEO); err == nil {
+ s.SendTimeout = v
+ }
+ if v, err := unix.GetsockoptTCPInfo(int(fd), syscall.SOL_TCP, syscall.TCP_INFO); err == nil {
+ s.TCPInfo = v
+ }
+}
diff --git a/vendor/google.golang.org/grpc/internal/channelz/types_nonlinux.go b/vendor/google.golang.org/grpc/internal/channelz/types_nonlinux.go
new file mode 100644
index 0000000..79edbef
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/channelz/types_nonlinux.go
@@ -0,0 +1,44 @@
+// +build !linux appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+import (
+ "sync"
+
+ "google.golang.org/grpc/grpclog"
+)
+
+var once sync.Once
+
+// SocketOptionData defines the struct to hold socket option data, and related
+// getter function to obtain info from fd.
+// Windows OS doesn't support Socket Option
+type SocketOptionData struct {
+}
+
+// Getsockopt defines the function to get socket options requested by channelz.
+// It is to be passed to syscall.RawConn.Control().
+// Windows OS doesn't support Socket Option
+func (s *SocketOptionData) Getsockopt(fd uintptr) {
+ once.Do(func() {
+ grpclog.Warningln("Channelz: socket options are not supported on non-linux os and appengine.")
+ })
+}
diff --git a/vendor/google.golang.org/grpc/internal/channelz/util_linux.go b/vendor/google.golang.org/grpc/internal/channelz/util_linux.go
new file mode 100644
index 0000000..fdf409d
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/channelz/util_linux.go
@@ -0,0 +1,39 @@
+// +build linux,!appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+import (
+ "syscall"
+)
+
+// GetSocketOption gets the socket option info of the conn.
+func GetSocketOption(socket interface{}) *SocketOptionData {
+ c, ok := socket.(syscall.Conn)
+ if !ok {
+ return nil
+ }
+ data := &SocketOptionData{}
+ if rawConn, err := c.SyscallConn(); err == nil {
+ rawConn.Control(data.Getsockopt)
+ return data
+ }
+ return nil
+}
diff --git a/vendor/google.golang.org/grpc/internal/channelz/util_nonlinux.go b/vendor/google.golang.org/grpc/internal/channelz/util_nonlinux.go
new file mode 100644
index 0000000..8864a08
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/channelz/util_nonlinux.go
@@ -0,0 +1,26 @@
+// +build !linux appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+// GetSocketOption gets the socket option info of the conn.
+func GetSocketOption(c interface{}) *SocketOptionData {
+ return nil
+}
diff --git a/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go b/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go
new file mode 100644
index 0000000..3ee8740
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go
@@ -0,0 +1,35 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package envconfig contains grpc settings configured by environment variables.
+package envconfig
+
+import (
+ "os"
+ "strings"
+)
+
+const (
+ prefix = "GRPC_GO_"
+ retryStr = prefix + "RETRY"
+)
+
+var (
+ // Retry is set if retry is explicitly enabled via "GRPC_GO_RETRY=on".
+ Retry = strings.EqualFold(os.Getenv(retryStr), "on")
+)
diff --git a/vendor/google.golang.org/grpc/internal/grpcrand/grpcrand.go b/vendor/google.golang.org/grpc/internal/grpcrand/grpcrand.go
new file mode 100644
index 0000000..200b115
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/grpcrand/grpcrand.go
@@ -0,0 +1,56 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package grpcrand implements math/rand functions in a concurrent-safe way
+// with a global random source, independent of math/rand's global source.
+package grpcrand
+
+import (
+ "math/rand"
+ "sync"
+ "time"
+)
+
+var (
+ r = rand.New(rand.NewSource(time.Now().UnixNano()))
+ mu sync.Mutex
+)
+
+// Int63n implements rand.Int63n on the grpcrand global source.
+func Int63n(n int64) int64 {
+ mu.Lock()
+ res := r.Int63n(n)
+ mu.Unlock()
+ return res
+}
+
+// Intn implements rand.Intn on the grpcrand global source.
+func Intn(n int) int {
+ mu.Lock()
+ res := r.Intn(n)
+ mu.Unlock()
+ return res
+}
+
+// Float64 implements rand.Float64 on the grpcrand global source.
+func Float64() float64 {
+ mu.Lock()
+ res := r.Float64()
+ mu.Unlock()
+ return res
+}
diff --git a/vendor/google.golang.org/grpc/internal/grpcsync/event.go b/vendor/google.golang.org/grpc/internal/grpcsync/event.go
new file mode 100644
index 0000000..fbe697c
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/grpcsync/event.go
@@ -0,0 +1,61 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package grpcsync implements additional synchronization primitives built upon
+// the sync package.
+package grpcsync
+
+import (
+ "sync"
+ "sync/atomic"
+)
+
+// Event represents a one-time event that may occur in the future.
+type Event struct {
+ fired int32
+ c chan struct{}
+ o sync.Once
+}
+
+// Fire causes e to complete. It is safe to call multiple times, and
+// concurrently. It returns true iff this call to Fire caused the signaling
+// channel returned by Done to close.
+func (e *Event) Fire() bool {
+ ret := false
+ e.o.Do(func() {
+ atomic.StoreInt32(&e.fired, 1)
+ close(e.c)
+ ret = true
+ })
+ return ret
+}
+
+// Done returns a channel that will be closed when Fire is called.
+func (e *Event) Done() <-chan struct{} {
+ return e.c
+}
+
+// HasFired returns true if Fire has been called.
+func (e *Event) HasFired() bool {
+ return atomic.LoadInt32(&e.fired) == 1
+}
+
+// NewEvent returns a new, ready-to-use Event.
+func NewEvent() *Event {
+ return &Event{c: make(chan struct{})}
+}
diff --git a/vendor/google.golang.org/grpc/internal/internal.go b/vendor/google.golang.org/grpc/internal/internal.go
new file mode 100644
index 0000000..b96b359
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/internal.go
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2016 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package internal contains gRPC-internal code, to avoid polluting
+// the godoc of the top-level grpc package. It must not import any grpc
+// symbols to avoid circular dependencies.
+package internal
+
+import (
+ "context"
+ "time"
+
+ "google.golang.org/grpc/connectivity"
+)
+
+var (
+ // WithResolverBuilder is set by dialoptions.go
+ WithResolverBuilder interface{} // func (resolver.Builder) grpc.DialOption
+ // WithHealthCheckFunc is set by dialoptions.go
+ WithHealthCheckFunc interface{} // func (HealthChecker) DialOption
+ // HealthCheckFunc is used to provide client-side LB channel health checking
+ HealthCheckFunc HealthChecker
+ // BalancerUnregister is exported by package balancer to unregister a balancer.
+ BalancerUnregister func(name string)
+ // KeepaliveMinPingTime is the minimum ping interval. This must be 10s by
+ // default, but tests may wish to set it lower for convenience.
+ KeepaliveMinPingTime = 10 * time.Second
+ // StatusRawProto is exported by status/status.go. This func returns a
+ // pointer to the wrapped Status proto for a given status.Status without a
+ // call to proto.Clone(). The returned Status proto should not be mutated by
+ // the caller.
+ StatusRawProto interface{} // func (*status.Status) *spb.Status
+ // NewRequestInfoContext creates a new context based on the argument context attaching
+ // the passed in RequestInfo to the new context.
+ NewRequestInfoContext interface{} // func(context.Context, credentials.RequestInfo) context.Context
+ // ParseServiceConfigForTesting is for creating a fake
+ // ClientConn for resolver testing only
+ ParseServiceConfigForTesting interface{} // func(string) *serviceconfig.ParseResult
+)
+
+// HealthChecker defines the signature of the client-side LB channel health checking function.
+//
+// The implementation is expected to create a health checking RPC stream by
+// calling newStream(), watch for the health status of serviceName, and report
+// it's health back by calling setConnectivityState().
+//
+// The health checking protocol is defined at:
+// https://github.com/grpc/grpc/blob/master/doc/health-checking.md
+type HealthChecker func(ctx context.Context, newStream func(string) (interface{}, error), setConnectivityState func(connectivity.State), serviceName string) error
+
+const (
+ // CredsBundleModeFallback switches GoogleDefaultCreds to fallback mode.
+ CredsBundleModeFallback = "fallback"
+ // CredsBundleModeBalancer switches GoogleDefaultCreds to grpclb balancer
+ // mode.
+ CredsBundleModeBalancer = "balancer"
+ // CredsBundleModeBackendFromBalancer switches GoogleDefaultCreds to mode
+ // that supports backend returned by grpclb balancer.
+ CredsBundleModeBackendFromBalancer = "backend-from-balancer"
+)
diff --git a/vendor/google.golang.org/grpc/internal/resolver/dns/dns_resolver.go b/vendor/google.golang.org/grpc/internal/resolver/dns/dns_resolver.go
new file mode 100644
index 0000000..abc0f92
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/resolver/dns/dns_resolver.go
@@ -0,0 +1,460 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package dns implements a dns resolver to be installed as the default resolver
+// in grpc.
+package dns
+
+import (
+ "context"
+ "encoding/json"
+ "errors"
+ "fmt"
+ "net"
+ "os"
+ "strconv"
+ "strings"
+ "sync"
+ "time"
+
+ "google.golang.org/grpc/backoff"
+ "google.golang.org/grpc/grpclog"
+ internalbackoff "google.golang.org/grpc/internal/backoff"
+ "google.golang.org/grpc/internal/grpcrand"
+ "google.golang.org/grpc/resolver"
+)
+
+func init() {
+ resolver.Register(NewBuilder())
+}
+
+const (
+ defaultPort = "443"
+ defaultFreq = time.Minute * 30
+ defaultDNSSvrPort = "53"
+ golang = "GO"
+ // txtPrefix is the prefix string to be prepended to the host name for txt record lookup.
+ txtPrefix = "_grpc_config."
+ // In DNS, service config is encoded in a TXT record via the mechanism
+ // described in RFC-1464 using the attribute name grpc_config.
+ txtAttribute = "grpc_config="
+)
+
+var (
+ errMissingAddr = errors.New("dns resolver: missing address")
+
+ // Addresses ending with a colon that is supposed to be the separator
+ // between host and port is not allowed. E.g. "::" is a valid address as
+ // it is an IPv6 address (host only) and "[::]:" is invalid as it ends with
+ // a colon as the host and port separator
+ errEndsWithColon = errors.New("dns resolver: missing port after port-separator colon")
+)
+
+var (
+ defaultResolver netResolver = net.DefaultResolver
+ // To prevent excessive re-resolution, we enforce a rate limit on DNS
+ // resolution requests.
+ minDNSResRate = 30 * time.Second
+)
+
+var customAuthorityDialler = func(authority string) func(ctx context.Context, network, address string) (net.Conn, error) {
+ return func(ctx context.Context, network, address string) (net.Conn, error) {
+ var dialer net.Dialer
+ return dialer.DialContext(ctx, network, authority)
+ }
+}
+
+var customAuthorityResolver = func(authority string) (netResolver, error) {
+ host, port, err := parseTarget(authority, defaultDNSSvrPort)
+ if err != nil {
+ return nil, err
+ }
+
+ authorityWithPort := net.JoinHostPort(host, port)
+
+ return &net.Resolver{
+ PreferGo: true,
+ Dial: customAuthorityDialler(authorityWithPort),
+ }, nil
+}
+
+// NewBuilder creates a dnsBuilder which is used to factory DNS resolvers.
+func NewBuilder() resolver.Builder {
+ return &dnsBuilder{minFreq: defaultFreq}
+}
+
+type dnsBuilder struct {
+ // minimum frequency of polling the DNS server.
+ minFreq time.Duration
+}
+
+// Build creates and starts a DNS resolver that watches the name resolution of the target.
+func (b *dnsBuilder) Build(target resolver.Target, cc resolver.ClientConn, opts resolver.BuildOption) (resolver.Resolver, error) {
+ host, port, err := parseTarget(target.Endpoint, defaultPort)
+ if err != nil {
+ return nil, err
+ }
+
+ // IP address.
+ if net.ParseIP(host) != nil {
+ host, _ = formatIP(host)
+ addr := []resolver.Address{{Addr: host + ":" + port}}
+ i := &ipResolver{
+ cc: cc,
+ ip: addr,
+ rn: make(chan struct{}, 1),
+ q: make(chan struct{}),
+ }
+ cc.NewAddress(addr)
+ go i.watcher()
+ return i, nil
+ }
+
+ // DNS address (non-IP).
+ ctx, cancel := context.WithCancel(context.Background())
+ bc := backoff.DefaultConfig
+ bc.MaxDelay = b.minFreq
+ d := &dnsResolver{
+ freq: b.minFreq,
+ backoff: internalbackoff.Exponential{Config: bc},
+ host: host,
+ port: port,
+ ctx: ctx,
+ cancel: cancel,
+ cc: cc,
+ t: time.NewTimer(0),
+ rn: make(chan struct{}, 1),
+ disableServiceConfig: opts.DisableServiceConfig,
+ }
+
+ if target.Authority == "" {
+ d.resolver = defaultResolver
+ } else {
+ d.resolver, err = customAuthorityResolver(target.Authority)
+ if err != nil {
+ return nil, err
+ }
+ }
+
+ d.wg.Add(1)
+ go d.watcher()
+ return d, nil
+}
+
+// Scheme returns the naming scheme of this resolver builder, which is "dns".
+func (b *dnsBuilder) Scheme() string {
+ return "dns"
+}
+
+type netResolver interface {
+ LookupHost(ctx context.Context, host string) (addrs []string, err error)
+ LookupSRV(ctx context.Context, service, proto, name string) (cname string, addrs []*net.SRV, err error)
+ LookupTXT(ctx context.Context, name string) (txts []string, err error)
+}
+
+// ipResolver watches for the name resolution update for an IP address.
+type ipResolver struct {
+ cc resolver.ClientConn
+ ip []resolver.Address
+ // rn channel is used by ResolveNow() to force an immediate resolution of the target.
+ rn chan struct{}
+ q chan struct{}
+}
+
+// ResolveNow resend the address it stores, no resolution is needed.
+func (i *ipResolver) ResolveNow(opt resolver.ResolveNowOption) {
+ select {
+ case i.rn <- struct{}{}:
+ default:
+ }
+}
+
+// Close closes the ipResolver.
+func (i *ipResolver) Close() {
+ close(i.q)
+}
+
+func (i *ipResolver) watcher() {
+ for {
+ select {
+ case <-i.rn:
+ i.cc.NewAddress(i.ip)
+ case <-i.q:
+ return
+ }
+ }
+}
+
+// dnsResolver watches for the name resolution update for a non-IP target.
+type dnsResolver struct {
+ freq time.Duration
+ backoff internalbackoff.Exponential
+ retryCount int
+ host string
+ port string
+ resolver netResolver
+ ctx context.Context
+ cancel context.CancelFunc
+ cc resolver.ClientConn
+ // rn channel is used by ResolveNow() to force an immediate resolution of the target.
+ rn chan struct{}
+ t *time.Timer
+ // wg is used to enforce Close() to return after the watcher() goroutine has finished.
+ // Otherwise, data race will be possible. [Race Example] in dns_resolver_test we
+ // replace the real lookup functions with mocked ones to facilitate testing.
+ // If Close() doesn't wait for watcher() goroutine finishes, race detector sometimes
+ // will warns lookup (READ the lookup function pointers) inside watcher() goroutine
+ // has data race with replaceNetFunc (WRITE the lookup function pointers).
+ wg sync.WaitGroup
+ disableServiceConfig bool
+}
+
+// ResolveNow invoke an immediate resolution of the target that this dnsResolver watches.
+func (d *dnsResolver) ResolveNow(opt resolver.ResolveNowOption) {
+ select {
+ case d.rn <- struct{}{}:
+ default:
+ }
+}
+
+// Close closes the dnsResolver.
+func (d *dnsResolver) Close() {
+ d.cancel()
+ d.wg.Wait()
+ d.t.Stop()
+}
+
+func (d *dnsResolver) watcher() {
+ defer d.wg.Done()
+ for {
+ select {
+ case <-d.ctx.Done():
+ return
+ case <-d.t.C:
+ case <-d.rn:
+ if !d.t.Stop() {
+ // Before resetting a timer, it should be stopped to prevent racing with
+ // reads on it's channel.
+ <-d.t.C
+ }
+ }
+
+ result, sc := d.lookup()
+ // Next lookup should happen within an interval defined by d.freq. It may be
+ // more often due to exponential retry on empty address list.
+ if len(result) == 0 {
+ d.retryCount++
+ d.t.Reset(d.backoff.Backoff(d.retryCount))
+ } else {
+ d.retryCount = 0
+ d.t.Reset(d.freq)
+ }
+ d.cc.NewServiceConfig(sc)
+ d.cc.NewAddress(result)
+
+ // Sleep to prevent excessive re-resolutions. Incoming resolution requests
+ // will be queued in d.rn.
+ t := time.NewTimer(minDNSResRate)
+ select {
+ case <-t.C:
+ case <-d.ctx.Done():
+ t.Stop()
+ return
+ }
+ }
+}
+
+func (d *dnsResolver) lookupSRV() []resolver.Address {
+ var newAddrs []resolver.Address
+ _, srvs, err := d.resolver.LookupSRV(d.ctx, "grpclb", "tcp", d.host)
+ if err != nil {
+ grpclog.Infof("grpc: failed dns SRV record lookup due to %v.\n", err)
+ return nil
+ }
+ for _, s := range srvs {
+ lbAddrs, err := d.resolver.LookupHost(d.ctx, s.Target)
+ if err != nil {
+ grpclog.Infof("grpc: failed load balancer address dns lookup due to %v.\n", err)
+ continue
+ }
+ for _, a := range lbAddrs {
+ a, ok := formatIP(a)
+ if !ok {
+ grpclog.Errorf("grpc: failed IP parsing due to %v.\n", err)
+ continue
+ }
+ addr := a + ":" + strconv.Itoa(int(s.Port))
+ newAddrs = append(newAddrs, resolver.Address{Addr: addr, Type: resolver.GRPCLB, ServerName: s.Target})
+ }
+ }
+ return newAddrs
+}
+
+func (d *dnsResolver) lookupTXT() string {
+ ss, err := d.resolver.LookupTXT(d.ctx, txtPrefix+d.host)
+ if err != nil {
+ grpclog.Infof("grpc: failed dns TXT record lookup due to %v.\n", err)
+ return ""
+ }
+ var res string
+ for _, s := range ss {
+ res += s
+ }
+
+ // TXT record must have "grpc_config=" attribute in order to be used as service config.
+ if !strings.HasPrefix(res, txtAttribute) {
+ grpclog.Warningf("grpc: TXT record %v missing %v attribute", res, txtAttribute)
+ return ""
+ }
+ return strings.TrimPrefix(res, txtAttribute)
+}
+
+func (d *dnsResolver) lookupHost() []resolver.Address {
+ var newAddrs []resolver.Address
+ addrs, err := d.resolver.LookupHost(d.ctx, d.host)
+ if err != nil {
+ grpclog.Warningf("grpc: failed dns A record lookup due to %v.\n", err)
+ return nil
+ }
+ for _, a := range addrs {
+ a, ok := formatIP(a)
+ if !ok {
+ grpclog.Errorf("grpc: failed IP parsing due to %v.\n", err)
+ continue
+ }
+ addr := a + ":" + d.port
+ newAddrs = append(newAddrs, resolver.Address{Addr: addr})
+ }
+ return newAddrs
+}
+
+func (d *dnsResolver) lookup() ([]resolver.Address, string) {
+ newAddrs := d.lookupSRV()
+ // Support fallback to non-balancer address.
+ newAddrs = append(newAddrs, d.lookupHost()...)
+ if d.disableServiceConfig {
+ return newAddrs, ""
+ }
+ sc := d.lookupTXT()
+ return newAddrs, canaryingSC(sc)
+}
+
+// formatIP returns ok = false if addr is not a valid textual representation of an IP address.
+// If addr is an IPv4 address, return the addr and ok = true.
+// If addr is an IPv6 address, return the addr enclosed in square brackets and ok = true.
+func formatIP(addr string) (addrIP string, ok bool) {
+ ip := net.ParseIP(addr)
+ if ip == nil {
+ return "", false
+ }
+ if ip.To4() != nil {
+ return addr, true
+ }
+ return "[" + addr + "]", true
+}
+
+// parseTarget takes the user input target string and default port, returns formatted host and port info.
+// If target doesn't specify a port, set the port to be the defaultPort.
+// If target is in IPv6 format and host-name is enclosed in square brackets, brackets
+// are stripped when setting the host.
+// examples:
+// target: "www.google.com" defaultPort: "443" returns host: "www.google.com", port: "443"
+// target: "ipv4-host:80" defaultPort: "443" returns host: "ipv4-host", port: "80"
+// target: "[ipv6-host]" defaultPort: "443" returns host: "ipv6-host", port: "443"
+// target: ":80" defaultPort: "443" returns host: "localhost", port: "80"
+func parseTarget(target, defaultPort string) (host, port string, err error) {
+ if target == "" {
+ return "", "", errMissingAddr
+ }
+ if ip := net.ParseIP(target); ip != nil {
+ // target is an IPv4 or IPv6(without brackets) address
+ return target, defaultPort, nil
+ }
+ if host, port, err = net.SplitHostPort(target); err == nil {
+ if port == "" {
+ // If the port field is empty (target ends with colon), e.g. "[::1]:", this is an error.
+ return "", "", errEndsWithColon
+ }
+ // target has port, i.e ipv4-host:port, [ipv6-host]:port, host-name:port
+ if host == "" {
+ // Keep consistent with net.Dial(): If the host is empty, as in ":80", the local system is assumed.
+ host = "localhost"
+ }
+ return host, port, nil
+ }
+ if host, port, err = net.SplitHostPort(target + ":" + defaultPort); err == nil {
+ // target doesn't have port
+ return host, port, nil
+ }
+ return "", "", fmt.Errorf("invalid target address %v, error info: %v", target, err)
+}
+
+type rawChoice struct {
+ ClientLanguage *[]string `json:"clientLanguage,omitempty"`
+ Percentage *int `json:"percentage,omitempty"`
+ ClientHostName *[]string `json:"clientHostName,omitempty"`
+ ServiceConfig *json.RawMessage `json:"serviceConfig,omitempty"`
+}
+
+func containsString(a *[]string, b string) bool {
+ if a == nil {
+ return true
+ }
+ for _, c := range *a {
+ if c == b {
+ return true
+ }
+ }
+ return false
+}
+
+func chosenByPercentage(a *int) bool {
+ if a == nil {
+ return true
+ }
+ return grpcrand.Intn(100)+1 <= *a
+}
+
+func canaryingSC(js string) string {
+ if js == "" {
+ return ""
+ }
+ var rcs []rawChoice
+ err := json.Unmarshal([]byte(js), &rcs)
+ if err != nil {
+ grpclog.Warningf("grpc: failed to parse service config json string due to %v.\n", err)
+ return ""
+ }
+ cliHostname, err := os.Hostname()
+ if err != nil {
+ grpclog.Warningf("grpc: failed to get client hostname due to %v.\n", err)
+ return ""
+ }
+ var sc string
+ for _, c := range rcs {
+ if !containsString(c.ClientLanguage, golang) ||
+ !chosenByPercentage(c.Percentage) ||
+ !containsString(c.ClientHostName, cliHostname) ||
+ c.ServiceConfig == nil {
+ continue
+ }
+ sc = string(*c.ServiceConfig)
+ break
+ }
+ return sc
+}
diff --git a/vendor/google.golang.org/grpc/internal/resolver/passthrough/passthrough.go b/vendor/google.golang.org/grpc/internal/resolver/passthrough/passthrough.go
new file mode 100644
index 0000000..893d5d1
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/resolver/passthrough/passthrough.go
@@ -0,0 +1,57 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package passthrough implements a pass-through resolver. It sends the target
+// name without scheme back to gRPC as resolved address.
+package passthrough
+
+import "google.golang.org/grpc/resolver"
+
+const scheme = "passthrough"
+
+type passthroughBuilder struct{}
+
+func (*passthroughBuilder) Build(target resolver.Target, cc resolver.ClientConn, opts resolver.BuildOption) (resolver.Resolver, error) {
+ r := &passthroughResolver{
+ target: target,
+ cc: cc,
+ }
+ r.start()
+ return r, nil
+}
+
+func (*passthroughBuilder) Scheme() string {
+ return scheme
+}
+
+type passthroughResolver struct {
+ target resolver.Target
+ cc resolver.ClientConn
+}
+
+func (r *passthroughResolver) start() {
+ r.cc.UpdateState(resolver.State{Addresses: []resolver.Address{{Addr: r.target.Endpoint}}})
+}
+
+func (*passthroughResolver) ResolveNow(o resolver.ResolveNowOption) {}
+
+func (*passthroughResolver) Close() {}
+
+func init() {
+ resolver.Register(&passthroughBuilder{})
+}
diff --git a/vendor/google.golang.org/grpc/internal/syscall/syscall_linux.go b/vendor/google.golang.org/grpc/internal/syscall/syscall_linux.go
new file mode 100644
index 0000000..43281a3
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/syscall/syscall_linux.go
@@ -0,0 +1,114 @@
+// +build !appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package syscall provides functionalities that grpc uses to get low-level operating system
+// stats/info.
+package syscall
+
+import (
+ "fmt"
+ "net"
+ "syscall"
+ "time"
+
+ "golang.org/x/sys/unix"
+ "google.golang.org/grpc/grpclog"
+)
+
+// GetCPUTime returns the how much CPU time has passed since the start of this process.
+func GetCPUTime() int64 {
+ var ts unix.Timespec
+ if err := unix.ClockGettime(unix.CLOCK_PROCESS_CPUTIME_ID, &ts); err != nil {
+ grpclog.Fatal(err)
+ }
+ return ts.Nano()
+}
+
+// Rusage is an alias for syscall.Rusage under linux non-appengine environment.
+type Rusage syscall.Rusage
+
+// GetRusage returns the resource usage of current process.
+func GetRusage() (rusage *Rusage) {
+ rusage = new(Rusage)
+ syscall.Getrusage(syscall.RUSAGE_SELF, (*syscall.Rusage)(rusage))
+ return
+}
+
+// CPUTimeDiff returns the differences of user CPU time and system CPU time used
+// between two Rusage structs.
+func CPUTimeDiff(first *Rusage, latest *Rusage) (float64, float64) {
+ f := (*syscall.Rusage)(first)
+ l := (*syscall.Rusage)(latest)
+ var (
+ utimeDiffs = l.Utime.Sec - f.Utime.Sec
+ utimeDiffus = l.Utime.Usec - f.Utime.Usec
+ stimeDiffs = l.Stime.Sec - f.Stime.Sec
+ stimeDiffus = l.Stime.Usec - f.Stime.Usec
+ )
+
+ uTimeElapsed := float64(utimeDiffs) + float64(utimeDiffus)*1.0e-6
+ sTimeElapsed := float64(stimeDiffs) + float64(stimeDiffus)*1.0e-6
+
+ return uTimeElapsed, sTimeElapsed
+}
+
+// SetTCPUserTimeout sets the TCP user timeout on a connection's socket
+func SetTCPUserTimeout(conn net.Conn, timeout time.Duration) error {
+ tcpconn, ok := conn.(*net.TCPConn)
+ if !ok {
+ // not a TCP connection. exit early
+ return nil
+ }
+ rawConn, err := tcpconn.SyscallConn()
+ if err != nil {
+ return fmt.Errorf("error getting raw connection: %v", err)
+ }
+ err = rawConn.Control(func(fd uintptr) {
+ err = syscall.SetsockoptInt(int(fd), syscall.IPPROTO_TCP, unix.TCP_USER_TIMEOUT, int(timeout/time.Millisecond))
+ })
+ if err != nil {
+ return fmt.Errorf("error setting option on socket: %v", err)
+ }
+
+ return nil
+}
+
+// GetTCPUserTimeout gets the TCP user timeout on a connection's socket
+func GetTCPUserTimeout(conn net.Conn) (opt int, err error) {
+ tcpconn, ok := conn.(*net.TCPConn)
+ if !ok {
+ err = fmt.Errorf("conn is not *net.TCPConn. got %T", conn)
+ return
+ }
+ rawConn, err := tcpconn.SyscallConn()
+ if err != nil {
+ err = fmt.Errorf("error getting raw connection: %v", err)
+ return
+ }
+ err = rawConn.Control(func(fd uintptr) {
+ opt, err = syscall.GetsockoptInt(int(fd), syscall.IPPROTO_TCP, unix.TCP_USER_TIMEOUT)
+ })
+ if err != nil {
+ err = fmt.Errorf("error getting option on socket: %v", err)
+ return
+ }
+
+ return
+}
diff --git a/vendor/google.golang.org/grpc/internal/syscall/syscall_nonlinux.go b/vendor/google.golang.org/grpc/internal/syscall/syscall_nonlinux.go
new file mode 100644
index 0000000..d3fd9da
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/syscall/syscall_nonlinux.go
@@ -0,0 +1,73 @@
+// +build !linux appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package syscall
+
+import (
+ "net"
+ "sync"
+ "time"
+
+ "google.golang.org/grpc/grpclog"
+)
+
+var once sync.Once
+
+func log() {
+ once.Do(func() {
+ grpclog.Info("CPU time info is unavailable on non-linux or appengine environment.")
+ })
+}
+
+// GetCPUTime returns the how much CPU time has passed since the start of this process.
+// It always returns 0 under non-linux or appengine environment.
+func GetCPUTime() int64 {
+ log()
+ return 0
+}
+
+// Rusage is an empty struct under non-linux or appengine environment.
+type Rusage struct{}
+
+// GetRusage is a no-op function under non-linux or appengine environment.
+func GetRusage() (rusage *Rusage) {
+ log()
+ return nil
+}
+
+// CPUTimeDiff returns the differences of user CPU time and system CPU time used
+// between two Rusage structs. It a no-op function for non-linux or appengine environment.
+func CPUTimeDiff(first *Rusage, latest *Rusage) (float64, float64) {
+ log()
+ return 0, 0
+}
+
+// SetTCPUserTimeout is a no-op function under non-linux or appengine environments
+func SetTCPUserTimeout(conn net.Conn, timeout time.Duration) error {
+ log()
+ return nil
+}
+
+// GetTCPUserTimeout is a no-op function under non-linux or appengine environments
+// a negative return value indicates the operation is not supported
+func GetTCPUserTimeout(conn net.Conn) (int, error) {
+ log()
+ return -1, nil
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/bdp_estimator.go b/vendor/google.golang.org/grpc/internal/transport/bdp_estimator.go
new file mode 100644
index 0000000..070680e
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/bdp_estimator.go
@@ -0,0 +1,141 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+ "sync"
+ "time"
+)
+
+const (
+ // bdpLimit is the maximum value the flow control windows will be increased
+ // to. TCP typically limits this to 4MB, but some systems go up to 16MB.
+ // Since this is only a limit, it is safe to make it optimistic.
+ bdpLimit = (1 << 20) * 16
+ // alpha is a constant factor used to keep a moving average
+ // of RTTs.
+ alpha = 0.9
+ // If the current bdp sample is greater than or equal to
+ // our beta * our estimated bdp and the current bandwidth
+ // sample is the maximum bandwidth observed so far, we
+ // increase our bbp estimate by a factor of gamma.
+ beta = 0.66
+ // To put our bdp to be smaller than or equal to twice the real BDP,
+ // we should multiply our current sample with 4/3, however to round things out
+ // we use 2 as the multiplication factor.
+ gamma = 2
+)
+
+// Adding arbitrary data to ping so that its ack can be identified.
+// Easter-egg: what does the ping message say?
+var bdpPing = &ping{data: [8]byte{2, 4, 16, 16, 9, 14, 7, 7}}
+
+type bdpEstimator struct {
+ // sentAt is the time when the ping was sent.
+ sentAt time.Time
+
+ mu sync.Mutex
+ // bdp is the current bdp estimate.
+ bdp uint32
+ // sample is the number of bytes received in one measurement cycle.
+ sample uint32
+ // bwMax is the maximum bandwidth noted so far (bytes/sec).
+ bwMax float64
+ // bool to keep track of the beginning of a new measurement cycle.
+ isSent bool
+ // Callback to update the window sizes.
+ updateFlowControl func(n uint32)
+ // sampleCount is the number of samples taken so far.
+ sampleCount uint64
+ // round trip time (seconds)
+ rtt float64
+}
+
+// timesnap registers the time bdp ping was sent out so that
+// network rtt can be calculated when its ack is received.
+// It is called (by controller) when the bdpPing is
+// being written on the wire.
+func (b *bdpEstimator) timesnap(d [8]byte) {
+ if bdpPing.data != d {
+ return
+ }
+ b.sentAt = time.Now()
+}
+
+// add adds bytes to the current sample for calculating bdp.
+// It returns true only if a ping must be sent. This can be used
+// by the caller (handleData) to make decision about batching
+// a window update with it.
+func (b *bdpEstimator) add(n uint32) bool {
+ b.mu.Lock()
+ defer b.mu.Unlock()
+ if b.bdp == bdpLimit {
+ return false
+ }
+ if !b.isSent {
+ b.isSent = true
+ b.sample = n
+ b.sentAt = time.Time{}
+ b.sampleCount++
+ return true
+ }
+ b.sample += n
+ return false
+}
+
+// calculate is called when an ack for a bdp ping is received.
+// Here we calculate the current bdp and bandwidth sample and
+// decide if the flow control windows should go up.
+func (b *bdpEstimator) calculate(d [8]byte) {
+ // Check if the ping acked for was the bdp ping.
+ if bdpPing.data != d {
+ return
+ }
+ b.mu.Lock()
+ rttSample := time.Since(b.sentAt).Seconds()
+ if b.sampleCount < 10 {
+ // Bootstrap rtt with an average of first 10 rtt samples.
+ b.rtt += (rttSample - b.rtt) / float64(b.sampleCount)
+ } else {
+ // Heed to the recent past more.
+ b.rtt += (rttSample - b.rtt) * float64(alpha)
+ }
+ b.isSent = false
+ // The number of bytes accumulated so far in the sample is smaller
+ // than or equal to 1.5 times the real BDP on a saturated connection.
+ bwCurrent := float64(b.sample) / (b.rtt * float64(1.5))
+ if bwCurrent > b.bwMax {
+ b.bwMax = bwCurrent
+ }
+ // If the current sample (which is smaller than or equal to the 1.5 times the real BDP) is
+ // greater than or equal to 2/3rd our perceived bdp AND this is the maximum bandwidth seen so far, we
+ // should update our perception of the network BDP.
+ if float64(b.sample) >= beta*float64(b.bdp) && bwCurrent == b.bwMax && b.bdp != bdpLimit {
+ sampleFloat := float64(b.sample)
+ b.bdp = uint32(gamma * sampleFloat)
+ if b.bdp > bdpLimit {
+ b.bdp = bdpLimit
+ }
+ bdp := b.bdp
+ b.mu.Unlock()
+ b.updateFlowControl(bdp)
+ return
+ }
+ b.mu.Unlock()
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/controlbuf.go b/vendor/google.golang.org/grpc/internal/transport/controlbuf.go
new file mode 100644
index 0000000..ddee20b
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/controlbuf.go
@@ -0,0 +1,926 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+ "bytes"
+ "fmt"
+ "runtime"
+ "sync"
+ "sync/atomic"
+
+ "golang.org/x/net/http2"
+ "golang.org/x/net/http2/hpack"
+)
+
+var updateHeaderTblSize = func(e *hpack.Encoder, v uint32) {
+ e.SetMaxDynamicTableSizeLimit(v)
+}
+
+type itemNode struct {
+ it interface{}
+ next *itemNode
+}
+
+type itemList struct {
+ head *itemNode
+ tail *itemNode
+}
+
+func (il *itemList) enqueue(i interface{}) {
+ n := &itemNode{it: i}
+ if il.tail == nil {
+ il.head, il.tail = n, n
+ return
+ }
+ il.tail.next = n
+ il.tail = n
+}
+
+// peek returns the first item in the list without removing it from the
+// list.
+func (il *itemList) peek() interface{} {
+ return il.head.it
+}
+
+func (il *itemList) dequeue() interface{} {
+ if il.head == nil {
+ return nil
+ }
+ i := il.head.it
+ il.head = il.head.next
+ if il.head == nil {
+ il.tail = nil
+ }
+ return i
+}
+
+func (il *itemList) dequeueAll() *itemNode {
+ h := il.head
+ il.head, il.tail = nil, nil
+ return h
+}
+
+func (il *itemList) isEmpty() bool {
+ return il.head == nil
+}
+
+// The following defines various control items which could flow through
+// the control buffer of transport. They represent different aspects of
+// control tasks, e.g., flow control, settings, streaming resetting, etc.
+
+// maxQueuedTransportResponseFrames is the most queued "transport response"
+// frames we will buffer before preventing new reads from occurring on the
+// transport. These are control frames sent in response to client requests,
+// such as RST_STREAM due to bad headers or settings acks.
+const maxQueuedTransportResponseFrames = 50
+
+type cbItem interface {
+ isTransportResponseFrame() bool
+}
+
+// registerStream is used to register an incoming stream with loopy writer.
+type registerStream struct {
+ streamID uint32
+ wq *writeQuota
+}
+
+func (*registerStream) isTransportResponseFrame() bool { return false }
+
+// headerFrame is also used to register stream on the client-side.
+type headerFrame struct {
+ streamID uint32
+ hf []hpack.HeaderField
+ endStream bool // Valid on server side.
+ initStream func(uint32) error // Used only on the client side.
+ onWrite func()
+ wq *writeQuota // write quota for the stream created.
+ cleanup *cleanupStream // Valid on the server side.
+ onOrphaned func(error) // Valid on client-side
+}
+
+func (h *headerFrame) isTransportResponseFrame() bool {
+ return h.cleanup != nil && h.cleanup.rst // Results in a RST_STREAM
+}
+
+type cleanupStream struct {
+ streamID uint32
+ rst bool
+ rstCode http2.ErrCode
+ onWrite func()
+}
+
+func (c *cleanupStream) isTransportResponseFrame() bool { return c.rst } // Results in a RST_STREAM
+
+type dataFrame struct {
+ streamID uint32
+ endStream bool
+ h []byte
+ d []byte
+ // onEachWrite is called every time
+ // a part of d is written out.
+ onEachWrite func()
+}
+
+func (*dataFrame) isTransportResponseFrame() bool { return false }
+
+type incomingWindowUpdate struct {
+ streamID uint32
+ increment uint32
+}
+
+func (*incomingWindowUpdate) isTransportResponseFrame() bool { return false }
+
+type outgoingWindowUpdate struct {
+ streamID uint32
+ increment uint32
+}
+
+func (*outgoingWindowUpdate) isTransportResponseFrame() bool {
+ return false // window updates are throttled by thresholds
+}
+
+type incomingSettings struct {
+ ss []http2.Setting
+}
+
+func (*incomingSettings) isTransportResponseFrame() bool { return true } // Results in a settings ACK
+
+type outgoingSettings struct {
+ ss []http2.Setting
+}
+
+func (*outgoingSettings) isTransportResponseFrame() bool { return false }
+
+type incomingGoAway struct {
+}
+
+func (*incomingGoAway) isTransportResponseFrame() bool { return false }
+
+type goAway struct {
+ code http2.ErrCode
+ debugData []byte
+ headsUp bool
+ closeConn bool
+}
+
+func (*goAway) isTransportResponseFrame() bool { return false }
+
+type ping struct {
+ ack bool
+ data [8]byte
+}
+
+func (*ping) isTransportResponseFrame() bool { return true }
+
+type outFlowControlSizeRequest struct {
+ resp chan uint32
+}
+
+func (*outFlowControlSizeRequest) isTransportResponseFrame() bool { return false }
+
+type outStreamState int
+
+const (
+ active outStreamState = iota
+ empty
+ waitingOnStreamQuota
+)
+
+type outStream struct {
+ id uint32
+ state outStreamState
+ itl *itemList
+ bytesOutStanding int
+ wq *writeQuota
+
+ next *outStream
+ prev *outStream
+}
+
+func (s *outStream) deleteSelf() {
+ if s.prev != nil {
+ s.prev.next = s.next
+ }
+ if s.next != nil {
+ s.next.prev = s.prev
+ }
+ s.next, s.prev = nil, nil
+}
+
+type outStreamList struct {
+ // Following are sentinel objects that mark the
+ // beginning and end of the list. They do not
+ // contain any item lists. All valid objects are
+ // inserted in between them.
+ // This is needed so that an outStream object can
+ // deleteSelf() in O(1) time without knowing which
+ // list it belongs to.
+ head *outStream
+ tail *outStream
+}
+
+func newOutStreamList() *outStreamList {
+ head, tail := new(outStream), new(outStream)
+ head.next = tail
+ tail.prev = head
+ return &outStreamList{
+ head: head,
+ tail: tail,
+ }
+}
+
+func (l *outStreamList) enqueue(s *outStream) {
+ e := l.tail.prev
+ e.next = s
+ s.prev = e
+ s.next = l.tail
+ l.tail.prev = s
+}
+
+// remove from the beginning of the list.
+func (l *outStreamList) dequeue() *outStream {
+ b := l.head.next
+ if b == l.tail {
+ return nil
+ }
+ b.deleteSelf()
+ return b
+}
+
+// controlBuffer is a way to pass information to loopy.
+// Information is passed as specific struct types called control frames.
+// A control frame not only represents data, messages or headers to be sent out
+// but can also be used to instruct loopy to update its internal state.
+// It shouldn't be confused with an HTTP2 frame, although some of the control frames
+// like dataFrame and headerFrame do go out on wire as HTTP2 frames.
+type controlBuffer struct {
+ ch chan struct{}
+ done <-chan struct{}
+ mu sync.Mutex
+ consumerWaiting bool
+ list *itemList
+ err error
+
+ // transportResponseFrames counts the number of queued items that represent
+ // the response of an action initiated by the peer. trfChan is created
+ // when transportResponseFrames >= maxQueuedTransportResponseFrames and is
+ // closed and nilled when transportResponseFrames drops below the
+ // threshold. Both fields are protected by mu.
+ transportResponseFrames int
+ trfChan atomic.Value // *chan struct{}
+}
+
+func newControlBuffer(done <-chan struct{}) *controlBuffer {
+ return &controlBuffer{
+ ch: make(chan struct{}, 1),
+ list: &itemList{},
+ done: done,
+ }
+}
+
+// throttle blocks if there are too many incomingSettings/cleanupStreams in the
+// controlbuf.
+func (c *controlBuffer) throttle() {
+ ch, _ := c.trfChan.Load().(*chan struct{})
+ if ch != nil {
+ select {
+ case <-*ch:
+ case <-c.done:
+ }
+ }
+}
+
+func (c *controlBuffer) put(it cbItem) error {
+ _, err := c.executeAndPut(nil, it)
+ return err
+}
+
+func (c *controlBuffer) executeAndPut(f func(it interface{}) bool, it cbItem) (bool, error) {
+ var wakeUp bool
+ c.mu.Lock()
+ if c.err != nil {
+ c.mu.Unlock()
+ return false, c.err
+ }
+ if f != nil {
+ if !f(it) { // f wasn't successful
+ c.mu.Unlock()
+ return false, nil
+ }
+ }
+ if c.consumerWaiting {
+ wakeUp = true
+ c.consumerWaiting = false
+ }
+ c.list.enqueue(it)
+ if it.isTransportResponseFrame() {
+ c.transportResponseFrames++
+ if c.transportResponseFrames == maxQueuedTransportResponseFrames {
+ // We are adding the frame that puts us over the threshold; create
+ // a throttling channel.
+ ch := make(chan struct{})
+ c.trfChan.Store(&ch)
+ }
+ }
+ c.mu.Unlock()
+ if wakeUp {
+ select {
+ case c.ch <- struct{}{}:
+ default:
+ }
+ }
+ return true, nil
+}
+
+// Note argument f should never be nil.
+func (c *controlBuffer) execute(f func(it interface{}) bool, it interface{}) (bool, error) {
+ c.mu.Lock()
+ if c.err != nil {
+ c.mu.Unlock()
+ return false, c.err
+ }
+ if !f(it) { // f wasn't successful
+ c.mu.Unlock()
+ return false, nil
+ }
+ c.mu.Unlock()
+ return true, nil
+}
+
+func (c *controlBuffer) get(block bool) (interface{}, error) {
+ for {
+ c.mu.Lock()
+ if c.err != nil {
+ c.mu.Unlock()
+ return nil, c.err
+ }
+ if !c.list.isEmpty() {
+ h := c.list.dequeue().(cbItem)
+ if h.isTransportResponseFrame() {
+ if c.transportResponseFrames == maxQueuedTransportResponseFrames {
+ // We are removing the frame that put us over the
+ // threshold; close and clear the throttling channel.
+ ch := c.trfChan.Load().(*chan struct{})
+ close(*ch)
+ c.trfChan.Store((*chan struct{})(nil))
+ }
+ c.transportResponseFrames--
+ }
+ c.mu.Unlock()
+ return h, nil
+ }
+ if !block {
+ c.mu.Unlock()
+ return nil, nil
+ }
+ c.consumerWaiting = true
+ c.mu.Unlock()
+ select {
+ case <-c.ch:
+ case <-c.done:
+ c.finish()
+ return nil, ErrConnClosing
+ }
+ }
+}
+
+func (c *controlBuffer) finish() {
+ c.mu.Lock()
+ if c.err != nil {
+ c.mu.Unlock()
+ return
+ }
+ c.err = ErrConnClosing
+ // There may be headers for streams in the control buffer.
+ // These streams need to be cleaned out since the transport
+ // is still not aware of these yet.
+ for head := c.list.dequeueAll(); head != nil; head = head.next {
+ hdr, ok := head.it.(*headerFrame)
+ if !ok {
+ continue
+ }
+ if hdr.onOrphaned != nil { // It will be nil on the server-side.
+ hdr.onOrphaned(ErrConnClosing)
+ }
+ }
+ c.mu.Unlock()
+}
+
+type side int
+
+const (
+ clientSide side = iota
+ serverSide
+)
+
+// Loopy receives frames from the control buffer.
+// Each frame is handled individually; most of the work done by loopy goes
+// into handling data frames. Loopy maintains a queue of active streams, and each
+// stream maintains a queue of data frames; as loopy receives data frames
+// it gets added to the queue of the relevant stream.
+// Loopy goes over this list of active streams by processing one node every iteration,
+// thereby closely resemebling to a round-robin scheduling over all streams. While
+// processing a stream, loopy writes out data bytes from this stream capped by the min
+// of http2MaxFrameLen, connection-level flow control and stream-level flow control.
+type loopyWriter struct {
+ side side
+ cbuf *controlBuffer
+ sendQuota uint32
+ oiws uint32 // outbound initial window size.
+ // estdStreams is map of all established streams that are not cleaned-up yet.
+ // On client-side, this is all streams whose headers were sent out.
+ // On server-side, this is all streams whose headers were received.
+ estdStreams map[uint32]*outStream // Established streams.
+ // activeStreams is a linked-list of all streams that have data to send and some
+ // stream-level flow control quota.
+ // Each of these streams internally have a list of data items(and perhaps trailers
+ // on the server-side) to be sent out.
+ activeStreams *outStreamList
+ framer *framer
+ hBuf *bytes.Buffer // The buffer for HPACK encoding.
+ hEnc *hpack.Encoder // HPACK encoder.
+ bdpEst *bdpEstimator
+ draining bool
+
+ // Side-specific handlers
+ ssGoAwayHandler func(*goAway) (bool, error)
+}
+
+func newLoopyWriter(s side, fr *framer, cbuf *controlBuffer, bdpEst *bdpEstimator) *loopyWriter {
+ var buf bytes.Buffer
+ l := &loopyWriter{
+ side: s,
+ cbuf: cbuf,
+ sendQuota: defaultWindowSize,
+ oiws: defaultWindowSize,
+ estdStreams: make(map[uint32]*outStream),
+ activeStreams: newOutStreamList(),
+ framer: fr,
+ hBuf: &buf,
+ hEnc: hpack.NewEncoder(&buf),
+ bdpEst: bdpEst,
+ }
+ return l
+}
+
+const minBatchSize = 1000
+
+// run should be run in a separate goroutine.
+// It reads control frames from controlBuf and processes them by:
+// 1. Updating loopy's internal state, or/and
+// 2. Writing out HTTP2 frames on the wire.
+//
+// Loopy keeps all active streams with data to send in a linked-list.
+// All streams in the activeStreams linked-list must have both:
+// 1. Data to send, and
+// 2. Stream level flow control quota available.
+//
+// In each iteration of run loop, other than processing the incoming control
+// frame, loopy calls processData, which processes one node from the activeStreams linked-list.
+// This results in writing of HTTP2 frames into an underlying write buffer.
+// When there's no more control frames to read from controlBuf, loopy flushes the write buffer.
+// As an optimization, to increase the batch size for each flush, loopy yields the processor, once
+// if the batch size is too low to give stream goroutines a chance to fill it up.
+func (l *loopyWriter) run() (err error) {
+ defer func() {
+ if err == ErrConnClosing {
+ // Don't log ErrConnClosing as error since it happens
+ // 1. When the connection is closed by some other known issue.
+ // 2. User closed the connection.
+ // 3. A graceful close of connection.
+ infof("transport: loopyWriter.run returning. %v", err)
+ err = nil
+ }
+ }()
+ for {
+ it, err := l.cbuf.get(true)
+ if err != nil {
+ return err
+ }
+ if err = l.handle(it); err != nil {
+ return err
+ }
+ if _, err = l.processData(); err != nil {
+ return err
+ }
+ gosched := true
+ hasdata:
+ for {
+ it, err := l.cbuf.get(false)
+ if err != nil {
+ return err
+ }
+ if it != nil {
+ if err = l.handle(it); err != nil {
+ return err
+ }
+ if _, err = l.processData(); err != nil {
+ return err
+ }
+ continue hasdata
+ }
+ isEmpty, err := l.processData()
+ if err != nil {
+ return err
+ }
+ if !isEmpty {
+ continue hasdata
+ }
+ if gosched {
+ gosched = false
+ if l.framer.writer.offset < minBatchSize {
+ runtime.Gosched()
+ continue hasdata
+ }
+ }
+ l.framer.writer.Flush()
+ break hasdata
+
+ }
+ }
+}
+
+func (l *loopyWriter) outgoingWindowUpdateHandler(w *outgoingWindowUpdate) error {
+ return l.framer.fr.WriteWindowUpdate(w.streamID, w.increment)
+}
+
+func (l *loopyWriter) incomingWindowUpdateHandler(w *incomingWindowUpdate) error {
+ // Otherwise update the quota.
+ if w.streamID == 0 {
+ l.sendQuota += w.increment
+ return nil
+ }
+ // Find the stream and update it.
+ if str, ok := l.estdStreams[w.streamID]; ok {
+ str.bytesOutStanding -= int(w.increment)
+ if strQuota := int(l.oiws) - str.bytesOutStanding; strQuota > 0 && str.state == waitingOnStreamQuota {
+ str.state = active
+ l.activeStreams.enqueue(str)
+ return nil
+ }
+ }
+ return nil
+}
+
+func (l *loopyWriter) outgoingSettingsHandler(s *outgoingSettings) error {
+ return l.framer.fr.WriteSettings(s.ss...)
+}
+
+func (l *loopyWriter) incomingSettingsHandler(s *incomingSettings) error {
+ if err := l.applySettings(s.ss); err != nil {
+ return err
+ }
+ return l.framer.fr.WriteSettingsAck()
+}
+
+func (l *loopyWriter) registerStreamHandler(h *registerStream) error {
+ str := &outStream{
+ id: h.streamID,
+ state: empty,
+ itl: &itemList{},
+ wq: h.wq,
+ }
+ l.estdStreams[h.streamID] = str
+ return nil
+}
+
+func (l *loopyWriter) headerHandler(h *headerFrame) error {
+ if l.side == serverSide {
+ str, ok := l.estdStreams[h.streamID]
+ if !ok {
+ warningf("transport: loopy doesn't recognize the stream: %d", h.streamID)
+ return nil
+ }
+ // Case 1.A: Server is responding back with headers.
+ if !h.endStream {
+ return l.writeHeader(h.streamID, h.endStream, h.hf, h.onWrite)
+ }
+ // else: Case 1.B: Server wants to close stream.
+
+ if str.state != empty { // either active or waiting on stream quota.
+ // add it str's list of items.
+ str.itl.enqueue(h)
+ return nil
+ }
+ if err := l.writeHeader(h.streamID, h.endStream, h.hf, h.onWrite); err != nil {
+ return err
+ }
+ return l.cleanupStreamHandler(h.cleanup)
+ }
+ // Case 2: Client wants to originate stream.
+ str := &outStream{
+ id: h.streamID,
+ state: empty,
+ itl: &itemList{},
+ wq: h.wq,
+ }
+ str.itl.enqueue(h)
+ return l.originateStream(str)
+}
+
+func (l *loopyWriter) originateStream(str *outStream) error {
+ hdr := str.itl.dequeue().(*headerFrame)
+ if err := hdr.initStream(str.id); err != nil {
+ if err == ErrConnClosing {
+ return err
+ }
+ // Other errors(errStreamDrain) need not close transport.
+ return nil
+ }
+ if err := l.writeHeader(str.id, hdr.endStream, hdr.hf, hdr.onWrite); err != nil {
+ return err
+ }
+ l.estdStreams[str.id] = str
+ return nil
+}
+
+func (l *loopyWriter) writeHeader(streamID uint32, endStream bool, hf []hpack.HeaderField, onWrite func()) error {
+ if onWrite != nil {
+ onWrite()
+ }
+ l.hBuf.Reset()
+ for _, f := range hf {
+ if err := l.hEnc.WriteField(f); err != nil {
+ warningf("transport: loopyWriter.writeHeader encountered error while encoding headers:", err)
+ }
+ }
+ var (
+ err error
+ endHeaders, first bool
+ )
+ first = true
+ for !endHeaders {
+ size := l.hBuf.Len()
+ if size > http2MaxFrameLen {
+ size = http2MaxFrameLen
+ } else {
+ endHeaders = true
+ }
+ if first {
+ first = false
+ err = l.framer.fr.WriteHeaders(http2.HeadersFrameParam{
+ StreamID: streamID,
+ BlockFragment: l.hBuf.Next(size),
+ EndStream: endStream,
+ EndHeaders: endHeaders,
+ })
+ } else {
+ err = l.framer.fr.WriteContinuation(
+ streamID,
+ endHeaders,
+ l.hBuf.Next(size),
+ )
+ }
+ if err != nil {
+ return err
+ }
+ }
+ return nil
+}
+
+func (l *loopyWriter) preprocessData(df *dataFrame) error {
+ str, ok := l.estdStreams[df.streamID]
+ if !ok {
+ return nil
+ }
+ // If we got data for a stream it means that
+ // stream was originated and the headers were sent out.
+ str.itl.enqueue(df)
+ if str.state == empty {
+ str.state = active
+ l.activeStreams.enqueue(str)
+ }
+ return nil
+}
+
+func (l *loopyWriter) pingHandler(p *ping) error {
+ if !p.ack {
+ l.bdpEst.timesnap(p.data)
+ }
+ return l.framer.fr.WritePing(p.ack, p.data)
+
+}
+
+func (l *loopyWriter) outFlowControlSizeRequestHandler(o *outFlowControlSizeRequest) error {
+ o.resp <- l.sendQuota
+ return nil
+}
+
+func (l *loopyWriter) cleanupStreamHandler(c *cleanupStream) error {
+ c.onWrite()
+ if str, ok := l.estdStreams[c.streamID]; ok {
+ // On the server side it could be a trailers-only response or
+ // a RST_STREAM before stream initialization thus the stream might
+ // not be established yet.
+ delete(l.estdStreams, c.streamID)
+ str.deleteSelf()
+ }
+ if c.rst { // If RST_STREAM needs to be sent.
+ if err := l.framer.fr.WriteRSTStream(c.streamID, c.rstCode); err != nil {
+ return err
+ }
+ }
+ if l.side == clientSide && l.draining && len(l.estdStreams) == 0 {
+ return ErrConnClosing
+ }
+ return nil
+}
+
+func (l *loopyWriter) incomingGoAwayHandler(*incomingGoAway) error {
+ if l.side == clientSide {
+ l.draining = true
+ if len(l.estdStreams) == 0 {
+ return ErrConnClosing
+ }
+ }
+ return nil
+}
+
+func (l *loopyWriter) goAwayHandler(g *goAway) error {
+ // Handling of outgoing GoAway is very specific to side.
+ if l.ssGoAwayHandler != nil {
+ draining, err := l.ssGoAwayHandler(g)
+ if err != nil {
+ return err
+ }
+ l.draining = draining
+ }
+ return nil
+}
+
+func (l *loopyWriter) handle(i interface{}) error {
+ switch i := i.(type) {
+ case *incomingWindowUpdate:
+ return l.incomingWindowUpdateHandler(i)
+ case *outgoingWindowUpdate:
+ return l.outgoingWindowUpdateHandler(i)
+ case *incomingSettings:
+ return l.incomingSettingsHandler(i)
+ case *outgoingSettings:
+ return l.outgoingSettingsHandler(i)
+ case *headerFrame:
+ return l.headerHandler(i)
+ case *registerStream:
+ return l.registerStreamHandler(i)
+ case *cleanupStream:
+ return l.cleanupStreamHandler(i)
+ case *incomingGoAway:
+ return l.incomingGoAwayHandler(i)
+ case *dataFrame:
+ return l.preprocessData(i)
+ case *ping:
+ return l.pingHandler(i)
+ case *goAway:
+ return l.goAwayHandler(i)
+ case *outFlowControlSizeRequest:
+ return l.outFlowControlSizeRequestHandler(i)
+ default:
+ return fmt.Errorf("transport: unknown control message type %T", i)
+ }
+}
+
+func (l *loopyWriter) applySettings(ss []http2.Setting) error {
+ for _, s := range ss {
+ switch s.ID {
+ case http2.SettingInitialWindowSize:
+ o := l.oiws
+ l.oiws = s.Val
+ if o < l.oiws {
+ // If the new limit is greater make all depleted streams active.
+ for _, stream := range l.estdStreams {
+ if stream.state == waitingOnStreamQuota {
+ stream.state = active
+ l.activeStreams.enqueue(stream)
+ }
+ }
+ }
+ case http2.SettingHeaderTableSize:
+ updateHeaderTblSize(l.hEnc, s.Val)
+ }
+ }
+ return nil
+}
+
+// processData removes the first stream from active streams, writes out at most 16KB
+// of its data and then puts it at the end of activeStreams if there's still more data
+// to be sent and stream has some stream-level flow control.
+func (l *loopyWriter) processData() (bool, error) {
+ if l.sendQuota == 0 {
+ return true, nil
+ }
+ str := l.activeStreams.dequeue() // Remove the first stream.
+ if str == nil {
+ return true, nil
+ }
+ dataItem := str.itl.peek().(*dataFrame) // Peek at the first data item this stream.
+ // A data item is represented by a dataFrame, since it later translates into
+ // multiple HTTP2 data frames.
+ // Every dataFrame has two buffers; h that keeps grpc-message header and d that is acutal data.
+ // As an optimization to keep wire traffic low, data from d is copied to h to make as big as the
+ // maximum possilbe HTTP2 frame size.
+
+ if len(dataItem.h) == 0 && len(dataItem.d) == 0 { // Empty data frame
+ // Client sends out empty data frame with endStream = true
+ if err := l.framer.fr.WriteData(dataItem.streamID, dataItem.endStream, nil); err != nil {
+ return false, err
+ }
+ str.itl.dequeue() // remove the empty data item from stream
+ if str.itl.isEmpty() {
+ str.state = empty
+ } else if trailer, ok := str.itl.peek().(*headerFrame); ok { // the next item is trailers.
+ if err := l.writeHeader(trailer.streamID, trailer.endStream, trailer.hf, trailer.onWrite); err != nil {
+ return false, err
+ }
+ if err := l.cleanupStreamHandler(trailer.cleanup); err != nil {
+ return false, nil
+ }
+ } else {
+ l.activeStreams.enqueue(str)
+ }
+ return false, nil
+ }
+ var (
+ idx int
+ buf []byte
+ )
+ if len(dataItem.h) != 0 { // data header has not been written out yet.
+ buf = dataItem.h
+ } else {
+ idx = 1
+ buf = dataItem.d
+ }
+ size := http2MaxFrameLen
+ if len(buf) < size {
+ size = len(buf)
+ }
+ if strQuota := int(l.oiws) - str.bytesOutStanding; strQuota <= 0 { // stream-level flow control.
+ str.state = waitingOnStreamQuota
+ return false, nil
+ } else if strQuota < size {
+ size = strQuota
+ }
+
+ if l.sendQuota < uint32(size) { // connection-level flow control.
+ size = int(l.sendQuota)
+ }
+ // Now that outgoing flow controls are checked we can replenish str's write quota
+ str.wq.replenish(size)
+ var endStream bool
+ // If this is the last data message on this stream and all of it can be written in this iteration.
+ if dataItem.endStream && size == len(buf) {
+ // buf contains either data or it contains header but data is empty.
+ if idx == 1 || len(dataItem.d) == 0 {
+ endStream = true
+ }
+ }
+ if dataItem.onEachWrite != nil {
+ dataItem.onEachWrite()
+ }
+ if err := l.framer.fr.WriteData(dataItem.streamID, endStream, buf[:size]); err != nil {
+ return false, err
+ }
+ buf = buf[size:]
+ str.bytesOutStanding += size
+ l.sendQuota -= uint32(size)
+ if idx == 0 {
+ dataItem.h = buf
+ } else {
+ dataItem.d = buf
+ }
+
+ if len(dataItem.h) == 0 && len(dataItem.d) == 0 { // All the data from that message was written out.
+ str.itl.dequeue()
+ }
+ if str.itl.isEmpty() {
+ str.state = empty
+ } else if trailer, ok := str.itl.peek().(*headerFrame); ok { // The next item is trailers.
+ if err := l.writeHeader(trailer.streamID, trailer.endStream, trailer.hf, trailer.onWrite); err != nil {
+ return false, err
+ }
+ if err := l.cleanupStreamHandler(trailer.cleanup); err != nil {
+ return false, err
+ }
+ } else if int(l.oiws)-str.bytesOutStanding <= 0 { // Ran out of stream quota.
+ str.state = waitingOnStreamQuota
+ } else { // Otherwise add it back to the list of active streams.
+ l.activeStreams.enqueue(str)
+ }
+ return false, nil
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/defaults.go b/vendor/google.golang.org/grpc/internal/transport/defaults.go
new file mode 100644
index 0000000..9fa306b
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/defaults.go
@@ -0,0 +1,49 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+ "math"
+ "time"
+)
+
+const (
+ // The default value of flow control window size in HTTP2 spec.
+ defaultWindowSize = 65535
+ // The initial window size for flow control.
+ initialWindowSize = defaultWindowSize // for an RPC
+ infinity = time.Duration(math.MaxInt64)
+ defaultClientKeepaliveTime = infinity
+ defaultClientKeepaliveTimeout = 20 * time.Second
+ defaultMaxStreamsClient = 100
+ defaultMaxConnectionIdle = infinity
+ defaultMaxConnectionAge = infinity
+ defaultMaxConnectionAgeGrace = infinity
+ defaultServerKeepaliveTime = 2 * time.Hour
+ defaultServerKeepaliveTimeout = 20 * time.Second
+ defaultKeepalivePolicyMinTime = 5 * time.Minute
+ // max window limit set by HTTP2 Specs.
+ maxWindowSize = math.MaxInt32
+ // defaultWriteQuota is the default value for number of data
+ // bytes that each stream can schedule before some of it being
+ // flushed out.
+ defaultWriteQuota = 64 * 1024
+ defaultClientMaxHeaderListSize = uint32(16 << 20)
+ defaultServerMaxHeaderListSize = uint32(16 << 20)
+)
diff --git a/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go b/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go
new file mode 100644
index 0000000..f262edd
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go
@@ -0,0 +1,217 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+ "fmt"
+ "math"
+ "sync"
+ "sync/atomic"
+)
+
+// writeQuota is a soft limit on the amount of data a stream can
+// schedule before some of it is written out.
+type writeQuota struct {
+ quota int32
+ // get waits on read from when quota goes less than or equal to zero.
+ // replenish writes on it when quota goes positive again.
+ ch chan struct{}
+ // done is triggered in error case.
+ done <-chan struct{}
+ // replenish is called by loopyWriter to give quota back to.
+ // It is implemented as a field so that it can be updated
+ // by tests.
+ replenish func(n int)
+}
+
+func newWriteQuota(sz int32, done <-chan struct{}) *writeQuota {
+ w := &writeQuota{
+ quota: sz,
+ ch: make(chan struct{}, 1),
+ done: done,
+ }
+ w.replenish = w.realReplenish
+ return w
+}
+
+func (w *writeQuota) get(sz int32) error {
+ for {
+ if atomic.LoadInt32(&w.quota) > 0 {
+ atomic.AddInt32(&w.quota, -sz)
+ return nil
+ }
+ select {
+ case <-w.ch:
+ continue
+ case <-w.done:
+ return errStreamDone
+ }
+ }
+}
+
+func (w *writeQuota) realReplenish(n int) {
+ sz := int32(n)
+ a := atomic.AddInt32(&w.quota, sz)
+ b := a - sz
+ if b <= 0 && a > 0 {
+ select {
+ case w.ch <- struct{}{}:
+ default:
+ }
+ }
+}
+
+type trInFlow struct {
+ limit uint32
+ unacked uint32
+ effectiveWindowSize uint32
+}
+
+func (f *trInFlow) newLimit(n uint32) uint32 {
+ d := n - f.limit
+ f.limit = n
+ f.updateEffectiveWindowSize()
+ return d
+}
+
+func (f *trInFlow) onData(n uint32) uint32 {
+ f.unacked += n
+ if f.unacked >= f.limit/4 {
+ w := f.unacked
+ f.unacked = 0
+ f.updateEffectiveWindowSize()
+ return w
+ }
+ f.updateEffectiveWindowSize()
+ return 0
+}
+
+func (f *trInFlow) reset() uint32 {
+ w := f.unacked
+ f.unacked = 0
+ f.updateEffectiveWindowSize()
+ return w
+}
+
+func (f *trInFlow) updateEffectiveWindowSize() {
+ atomic.StoreUint32(&f.effectiveWindowSize, f.limit-f.unacked)
+}
+
+func (f *trInFlow) getSize() uint32 {
+ return atomic.LoadUint32(&f.effectiveWindowSize)
+}
+
+// TODO(mmukhi): Simplify this code.
+// inFlow deals with inbound flow control
+type inFlow struct {
+ mu sync.Mutex
+ // The inbound flow control limit for pending data.
+ limit uint32
+ // pendingData is the overall data which have been received but not been
+ // consumed by applications.
+ pendingData uint32
+ // The amount of data the application has consumed but grpc has not sent
+ // window update for them. Used to reduce window update frequency.
+ pendingUpdate uint32
+ // delta is the extra window update given by receiver when an application
+ // is reading data bigger in size than the inFlow limit.
+ delta uint32
+}
+
+// newLimit updates the inflow window to a new value n.
+// It assumes that n is always greater than the old limit.
+func (f *inFlow) newLimit(n uint32) uint32 {
+ f.mu.Lock()
+ d := n - f.limit
+ f.limit = n
+ f.mu.Unlock()
+ return d
+}
+
+func (f *inFlow) maybeAdjust(n uint32) uint32 {
+ if n > uint32(math.MaxInt32) {
+ n = uint32(math.MaxInt32)
+ }
+ f.mu.Lock()
+ defer f.mu.Unlock()
+ // estSenderQuota is the receiver's view of the maximum number of bytes the sender
+ // can send without a window update.
+ estSenderQuota := int32(f.limit - (f.pendingData + f.pendingUpdate))
+ // estUntransmittedData is the maximum number of bytes the sends might not have put
+ // on the wire yet. A value of 0 or less means that we have already received all or
+ // more bytes than the application is requesting to read.
+ estUntransmittedData := int32(n - f.pendingData) // Casting into int32 since it could be negative.
+ // This implies that unless we send a window update, the sender won't be able to send all the bytes
+ // for this message. Therefore we must send an update over the limit since there's an active read
+ // request from the application.
+ if estUntransmittedData > estSenderQuota {
+ // Sender's window shouldn't go more than 2^31 - 1 as specified in the HTTP spec.
+ if f.limit+n > maxWindowSize {
+ f.delta = maxWindowSize - f.limit
+ } else {
+ // Send a window update for the whole message and not just the difference between
+ // estUntransmittedData and estSenderQuota. This will be helpful in case the message
+ // is padded; We will fallback on the current available window(at least a 1/4th of the limit).
+ f.delta = n
+ }
+ return f.delta
+ }
+ return 0
+}
+
+// onData is invoked when some data frame is received. It updates pendingData.
+func (f *inFlow) onData(n uint32) error {
+ f.mu.Lock()
+ f.pendingData += n
+ if f.pendingData+f.pendingUpdate > f.limit+f.delta {
+ limit := f.limit
+ rcvd := f.pendingData + f.pendingUpdate
+ f.mu.Unlock()
+ return fmt.Errorf("received %d-bytes data exceeding the limit %d bytes", rcvd, limit)
+ }
+ f.mu.Unlock()
+ return nil
+}
+
+// onRead is invoked when the application reads the data. It returns the window size
+// to be sent to the peer.
+func (f *inFlow) onRead(n uint32) uint32 {
+ f.mu.Lock()
+ if f.pendingData == 0 {
+ f.mu.Unlock()
+ return 0
+ }
+ f.pendingData -= n
+ if n > f.delta {
+ n -= f.delta
+ f.delta = 0
+ } else {
+ f.delta -= n
+ n = 0
+ }
+ f.pendingUpdate += n
+ if f.pendingUpdate >= f.limit/4 {
+ wu := f.pendingUpdate
+ f.pendingUpdate = 0
+ f.mu.Unlock()
+ return wu
+ }
+ f.mu.Unlock()
+ return 0
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/handler_server.go b/vendor/google.golang.org/grpc/internal/transport/handler_server.go
new file mode 100644
index 0000000..78f9ddc
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/handler_server.go
@@ -0,0 +1,431 @@
+/*
+ *
+ * Copyright 2016 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// This file is the implementation of a gRPC server using HTTP/2 which
+// uses the standard Go http2 Server implementation (via the
+// http.Handler interface), rather than speaking low-level HTTP/2
+// frames itself. It is the implementation of *grpc.Server.ServeHTTP.
+
+package transport
+
+import (
+ "bytes"
+ "context"
+ "errors"
+ "fmt"
+ "io"
+ "net"
+ "net/http"
+ "strings"
+ "sync"
+ "time"
+
+ "github.com/golang/protobuf/proto"
+ "golang.org/x/net/http2"
+ "google.golang.org/grpc/codes"
+ "google.golang.org/grpc/credentials"
+ "google.golang.org/grpc/metadata"
+ "google.golang.org/grpc/peer"
+ "google.golang.org/grpc/stats"
+ "google.golang.org/grpc/status"
+)
+
+// NewServerHandlerTransport returns a ServerTransport handling gRPC
+// from inside an http.Handler. It requires that the http Server
+// supports HTTP/2.
+func NewServerHandlerTransport(w http.ResponseWriter, r *http.Request, stats stats.Handler) (ServerTransport, error) {
+ if r.ProtoMajor != 2 {
+ return nil, errors.New("gRPC requires HTTP/2")
+ }
+ if r.Method != "POST" {
+ return nil, errors.New("invalid gRPC request method")
+ }
+ contentType := r.Header.Get("Content-Type")
+ // TODO: do we assume contentType is lowercase? we did before
+ contentSubtype, validContentType := contentSubtype(contentType)
+ if !validContentType {
+ return nil, errors.New("invalid gRPC request content-type")
+ }
+ if _, ok := w.(http.Flusher); !ok {
+ return nil, errors.New("gRPC requires a ResponseWriter supporting http.Flusher")
+ }
+
+ st := &serverHandlerTransport{
+ rw: w,
+ req: r,
+ closedCh: make(chan struct{}),
+ writes: make(chan func()),
+ contentType: contentType,
+ contentSubtype: contentSubtype,
+ stats: stats,
+ }
+
+ if v := r.Header.Get("grpc-timeout"); v != "" {
+ to, err := decodeTimeout(v)
+ if err != nil {
+ return nil, status.Errorf(codes.Internal, "malformed time-out: %v", err)
+ }
+ st.timeoutSet = true
+ st.timeout = to
+ }
+
+ metakv := []string{"content-type", contentType}
+ if r.Host != "" {
+ metakv = append(metakv, ":authority", r.Host)
+ }
+ for k, vv := range r.Header {
+ k = strings.ToLower(k)
+ if isReservedHeader(k) && !isWhitelistedHeader(k) {
+ continue
+ }
+ for _, v := range vv {
+ v, err := decodeMetadataHeader(k, v)
+ if err != nil {
+ return nil, status.Errorf(codes.Internal, "malformed binary metadata: %v", err)
+ }
+ metakv = append(metakv, k, v)
+ }
+ }
+ st.headerMD = metadata.Pairs(metakv...)
+
+ return st, nil
+}
+
+// serverHandlerTransport is an implementation of ServerTransport
+// which replies to exactly one gRPC request (exactly one HTTP request),
+// using the net/http.Handler interface. This http.Handler is guaranteed
+// at this point to be speaking over HTTP/2, so it's able to speak valid
+// gRPC.
+type serverHandlerTransport struct {
+ rw http.ResponseWriter
+ req *http.Request
+ timeoutSet bool
+ timeout time.Duration
+ didCommonHeaders bool
+
+ headerMD metadata.MD
+
+ closeOnce sync.Once
+ closedCh chan struct{} // closed on Close
+
+ // writes is a channel of code to run serialized in the
+ // ServeHTTP (HandleStreams) goroutine. The channel is closed
+ // when WriteStatus is called.
+ writes chan func()
+
+ // block concurrent WriteStatus calls
+ // e.g. grpc/(*serverStream).SendMsg/RecvMsg
+ writeStatusMu sync.Mutex
+
+ // we just mirror the request content-type
+ contentType string
+ // we store both contentType and contentSubtype so we don't keep recreating them
+ // TODO make sure this is consistent across handler_server and http2_server
+ contentSubtype string
+
+ stats stats.Handler
+}
+
+func (ht *serverHandlerTransport) Close() error {
+ ht.closeOnce.Do(ht.closeCloseChanOnce)
+ return nil
+}
+
+func (ht *serverHandlerTransport) closeCloseChanOnce() { close(ht.closedCh) }
+
+func (ht *serverHandlerTransport) RemoteAddr() net.Addr { return strAddr(ht.req.RemoteAddr) }
+
+// strAddr is a net.Addr backed by either a TCP "ip:port" string, or
+// the empty string if unknown.
+type strAddr string
+
+func (a strAddr) Network() string {
+ if a != "" {
+ // Per the documentation on net/http.Request.RemoteAddr, if this is
+ // set, it's set to the IP:port of the peer (hence, TCP):
+ // https://golang.org/pkg/net/http/#Request
+ //
+ // If we want to support Unix sockets later, we can
+ // add our own grpc-specific convention within the
+ // grpc codebase to set RemoteAddr to a different
+ // format, or probably better: we can attach it to the
+ // context and use that from serverHandlerTransport.RemoteAddr.
+ return "tcp"
+ }
+ return ""
+}
+
+func (a strAddr) String() string { return string(a) }
+
+// do runs fn in the ServeHTTP goroutine.
+func (ht *serverHandlerTransport) do(fn func()) error {
+ select {
+ case <-ht.closedCh:
+ return ErrConnClosing
+ case ht.writes <- fn:
+ return nil
+ }
+}
+
+func (ht *serverHandlerTransport) WriteStatus(s *Stream, st *status.Status) error {
+ ht.writeStatusMu.Lock()
+ defer ht.writeStatusMu.Unlock()
+
+ err := ht.do(func() {
+ ht.writeCommonHeaders(s)
+
+ // And flush, in case no header or body has been sent yet.
+ // This forces a separation of headers and trailers if this is the
+ // first call (for example, in end2end tests's TestNoService).
+ ht.rw.(http.Flusher).Flush()
+
+ h := ht.rw.Header()
+ h.Set("Grpc-Status", fmt.Sprintf("%d", st.Code()))
+ if m := st.Message(); m != "" {
+ h.Set("Grpc-Message", encodeGrpcMessage(m))
+ }
+
+ if p := st.Proto(); p != nil && len(p.Details) > 0 {
+ stBytes, err := proto.Marshal(p)
+ if err != nil {
+ // TODO: return error instead, when callers are able to handle it.
+ panic(err)
+ }
+
+ h.Set("Grpc-Status-Details-Bin", encodeBinHeader(stBytes))
+ }
+
+ if md := s.Trailer(); len(md) > 0 {
+ for k, vv := range md {
+ // Clients don't tolerate reading restricted headers after some non restricted ones were sent.
+ if isReservedHeader(k) {
+ continue
+ }
+ for _, v := range vv {
+ // http2 ResponseWriter mechanism to send undeclared Trailers after
+ // the headers have possibly been written.
+ h.Add(http2.TrailerPrefix+k, encodeMetadataHeader(k, v))
+ }
+ }
+ }
+ })
+
+ if err == nil { // transport has not been closed
+ if ht.stats != nil {
+ ht.stats.HandleRPC(s.Context(), &stats.OutTrailer{})
+ }
+ }
+ ht.Close()
+ return err
+}
+
+// writeCommonHeaders sets common headers on the first write
+// call (Write, WriteHeader, or WriteStatus).
+func (ht *serverHandlerTransport) writeCommonHeaders(s *Stream) {
+ if ht.didCommonHeaders {
+ return
+ }
+ ht.didCommonHeaders = true
+
+ h := ht.rw.Header()
+ h["Date"] = nil // suppress Date to make tests happy; TODO: restore
+ h.Set("Content-Type", ht.contentType)
+
+ // Predeclare trailers we'll set later in WriteStatus (after the body).
+ // This is a SHOULD in the HTTP RFC, and the way you add (known)
+ // Trailers per the net/http.ResponseWriter contract.
+ // See https://golang.org/pkg/net/http/#ResponseWriter
+ // and https://golang.org/pkg/net/http/#example_ResponseWriter_trailers
+ h.Add("Trailer", "Grpc-Status")
+ h.Add("Trailer", "Grpc-Message")
+ h.Add("Trailer", "Grpc-Status-Details-Bin")
+
+ if s.sendCompress != "" {
+ h.Set("Grpc-Encoding", s.sendCompress)
+ }
+}
+
+func (ht *serverHandlerTransport) Write(s *Stream, hdr []byte, data []byte, opts *Options) error {
+ return ht.do(func() {
+ ht.writeCommonHeaders(s)
+ ht.rw.Write(hdr)
+ ht.rw.Write(data)
+ ht.rw.(http.Flusher).Flush()
+ })
+}
+
+func (ht *serverHandlerTransport) WriteHeader(s *Stream, md metadata.MD) error {
+ err := ht.do(func() {
+ ht.writeCommonHeaders(s)
+ h := ht.rw.Header()
+ for k, vv := range md {
+ // Clients don't tolerate reading restricted headers after some non restricted ones were sent.
+ if isReservedHeader(k) {
+ continue
+ }
+ for _, v := range vv {
+ v = encodeMetadataHeader(k, v)
+ h.Add(k, v)
+ }
+ }
+ ht.rw.WriteHeader(200)
+ ht.rw.(http.Flusher).Flush()
+ })
+
+ if err == nil {
+ if ht.stats != nil {
+ ht.stats.HandleRPC(s.Context(), &stats.OutHeader{})
+ }
+ }
+ return err
+}
+
+func (ht *serverHandlerTransport) HandleStreams(startStream func(*Stream), traceCtx func(context.Context, string) context.Context) {
+ // With this transport type there will be exactly 1 stream: this HTTP request.
+
+ ctx := ht.req.Context()
+ var cancel context.CancelFunc
+ if ht.timeoutSet {
+ ctx, cancel = context.WithTimeout(ctx, ht.timeout)
+ } else {
+ ctx, cancel = context.WithCancel(ctx)
+ }
+
+ // requestOver is closed when the status has been written via WriteStatus.
+ requestOver := make(chan struct{})
+ go func() {
+ select {
+ case <-requestOver:
+ case <-ht.closedCh:
+ case <-ht.req.Context().Done():
+ }
+ cancel()
+ ht.Close()
+ }()
+
+ req := ht.req
+
+ s := &Stream{
+ id: 0, // irrelevant
+ requestRead: func(int) {},
+ cancel: cancel,
+ buf: newRecvBuffer(),
+ st: ht,
+ method: req.URL.Path,
+ recvCompress: req.Header.Get("grpc-encoding"),
+ contentSubtype: ht.contentSubtype,
+ }
+ pr := &peer.Peer{
+ Addr: ht.RemoteAddr(),
+ }
+ if req.TLS != nil {
+ pr.AuthInfo = credentials.TLSInfo{State: *req.TLS}
+ }
+ ctx = metadata.NewIncomingContext(ctx, ht.headerMD)
+ s.ctx = peer.NewContext(ctx, pr)
+ if ht.stats != nil {
+ s.ctx = ht.stats.TagRPC(s.ctx, &stats.RPCTagInfo{FullMethodName: s.method})
+ inHeader := &stats.InHeader{
+ FullMethod: s.method,
+ RemoteAddr: ht.RemoteAddr(),
+ Compression: s.recvCompress,
+ }
+ ht.stats.HandleRPC(s.ctx, inHeader)
+ }
+ s.trReader = &transportReader{
+ reader: &recvBufferReader{ctx: s.ctx, ctxDone: s.ctx.Done(), recv: s.buf, freeBuffer: func(*bytes.Buffer) {}},
+ windowHandler: func(int) {},
+ }
+
+ // readerDone is closed when the Body.Read-ing goroutine exits.
+ readerDone := make(chan struct{})
+ go func() {
+ defer close(readerDone)
+
+ // TODO: minimize garbage, optimize recvBuffer code/ownership
+ const readSize = 8196
+ for buf := make([]byte, readSize); ; {
+ n, err := req.Body.Read(buf)
+ if n > 0 {
+ s.buf.put(recvMsg{buffer: bytes.NewBuffer(buf[:n:n])})
+ buf = buf[n:]
+ }
+ if err != nil {
+ s.buf.put(recvMsg{err: mapRecvMsgError(err)})
+ return
+ }
+ if len(buf) == 0 {
+ buf = make([]byte, readSize)
+ }
+ }
+ }()
+
+ // startStream is provided by the *grpc.Server's serveStreams.
+ // It starts a goroutine serving s and exits immediately.
+ // The goroutine that is started is the one that then calls
+ // into ht, calling WriteHeader, Write, WriteStatus, Close, etc.
+ startStream(s)
+
+ ht.runStream()
+ close(requestOver)
+
+ // Wait for reading goroutine to finish.
+ req.Body.Close()
+ <-readerDone
+}
+
+func (ht *serverHandlerTransport) runStream() {
+ for {
+ select {
+ case fn := <-ht.writes:
+ fn()
+ case <-ht.closedCh:
+ return
+ }
+ }
+}
+
+func (ht *serverHandlerTransport) IncrMsgSent() {}
+
+func (ht *serverHandlerTransport) IncrMsgRecv() {}
+
+func (ht *serverHandlerTransport) Drain() {
+ panic("Drain() is not implemented")
+}
+
+// mapRecvMsgError returns the non-nil err into the appropriate
+// error value as expected by callers of *grpc.parser.recvMsg.
+// In particular, in can only be:
+// * io.EOF
+// * io.ErrUnexpectedEOF
+// * of type transport.ConnectionError
+// * an error from the status package
+func mapRecvMsgError(err error) error {
+ if err == io.EOF || err == io.ErrUnexpectedEOF {
+ return err
+ }
+ if se, ok := err.(http2.StreamError); ok {
+ if code, ok := http2ErrConvTab[se.Code]; ok {
+ return status.Error(code, se.Error())
+ }
+ }
+ if strings.Contains(err.Error(), "body closed by handler") {
+ return status.Error(codes.Canceled, err.Error())
+ }
+ return connectionErrorf(true, err, err.Error())
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/http2_client.go b/vendor/google.golang.org/grpc/internal/transport/http2_client.go
new file mode 100644
index 0000000..294661a
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/http2_client.go
@@ -0,0 +1,1440 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+ "context"
+ "fmt"
+ "io"
+ "math"
+ "net"
+ "strconv"
+ "strings"
+ "sync"
+ "sync/atomic"
+ "time"
+
+ "golang.org/x/net/http2"
+ "golang.org/x/net/http2/hpack"
+
+ "google.golang.org/grpc/codes"
+ "google.golang.org/grpc/credentials"
+ "google.golang.org/grpc/internal"
+ "google.golang.org/grpc/internal/channelz"
+ "google.golang.org/grpc/internal/syscall"
+ "google.golang.org/grpc/keepalive"
+ "google.golang.org/grpc/metadata"
+ "google.golang.org/grpc/peer"
+ "google.golang.org/grpc/stats"
+ "google.golang.org/grpc/status"
+)
+
+// http2Client implements the ClientTransport interface with HTTP2.
+type http2Client struct {
+ lastRead int64 // keep this field 64-bit aligned
+ ctx context.Context
+ cancel context.CancelFunc
+ ctxDone <-chan struct{} // Cache the ctx.Done() chan.
+ userAgent string
+ md interface{}
+ conn net.Conn // underlying communication channel
+ loopy *loopyWriter
+ remoteAddr net.Addr
+ localAddr net.Addr
+ authInfo credentials.AuthInfo // auth info about the connection
+
+ readerDone chan struct{} // sync point to enable testing.
+ writerDone chan struct{} // sync point to enable testing.
+ // goAway is closed to notify the upper layer (i.e., addrConn.transportMonitor)
+ // that the server sent GoAway on this transport.
+ goAway chan struct{}
+
+ framer *framer
+ // controlBuf delivers all the control related tasks (e.g., window
+ // updates, reset streams, and various settings) to the controller.
+ controlBuf *controlBuffer
+ fc *trInFlow
+ // The scheme used: https if TLS is on, http otherwise.
+ scheme string
+
+ isSecure bool
+
+ perRPCCreds []credentials.PerRPCCredentials
+
+ kp keepalive.ClientParameters
+ keepaliveEnabled bool
+
+ statsHandler stats.Handler
+
+ initialWindowSize int32
+
+ // configured by peer through SETTINGS_MAX_HEADER_LIST_SIZE
+ maxSendHeaderListSize *uint32
+
+ bdpEst *bdpEstimator
+ // onPrefaceReceipt is a callback that client transport calls upon
+ // receiving server preface to signal that a succefull HTTP2
+ // connection was established.
+ onPrefaceReceipt func()
+
+ maxConcurrentStreams uint32
+ streamQuota int64
+ streamsQuotaAvailable chan struct{}
+ waitingStreams uint32
+ nextID uint32
+
+ mu sync.Mutex // guard the following variables
+ state transportState
+ activeStreams map[uint32]*Stream
+ // prevGoAway ID records the Last-Stream-ID in the previous GOAway frame.
+ prevGoAwayID uint32
+ // goAwayReason records the http2.ErrCode and debug data received with the
+ // GoAway frame.
+ goAwayReason GoAwayReason
+ // A condition variable used to signal when the keepalive goroutine should
+ // go dormant. The condition for dormancy is based on the number of active
+ // streams and the `PermitWithoutStream` keepalive client parameter. And
+ // since the number of active streams is guarded by the above mutex, we use
+ // the same for this condition variable as well.
+ kpDormancyCond *sync.Cond
+ // A boolean to track whether the keepalive goroutine is dormant or not.
+ // This is checked before attempting to signal the above condition
+ // variable.
+ kpDormant bool
+
+ // Fields below are for channelz metric collection.
+ channelzID int64 // channelz unique identification number
+ czData *channelzData
+
+ onGoAway func(GoAwayReason)
+ onClose func()
+
+ bufferPool *bufferPool
+}
+
+func dial(ctx context.Context, fn func(context.Context, string) (net.Conn, error), addr string) (net.Conn, error) {
+ if fn != nil {
+ return fn(ctx, addr)
+ }
+ return (&net.Dialer{}).DialContext(ctx, "tcp", addr)
+}
+
+func isTemporary(err error) bool {
+ switch err := err.(type) {
+ case interface {
+ Temporary() bool
+ }:
+ return err.Temporary()
+ case interface {
+ Timeout() bool
+ }:
+ // Timeouts may be resolved upon retry, and are thus treated as
+ // temporary.
+ return err.Timeout()
+ }
+ return true
+}
+
+// newHTTP2Client constructs a connected ClientTransport to addr based on HTTP2
+// and starts to receive messages on it. Non-nil error returns if construction
+// fails.
+func newHTTP2Client(connectCtx, ctx context.Context, addr TargetInfo, opts ConnectOptions, onPrefaceReceipt func(), onGoAway func(GoAwayReason), onClose func()) (_ *http2Client, err error) {
+ scheme := "http"
+ ctx, cancel := context.WithCancel(ctx)
+ defer func() {
+ if err != nil {
+ cancel()
+ }
+ }()
+
+ conn, err := dial(connectCtx, opts.Dialer, addr.Addr)
+ if err != nil {
+ if opts.FailOnNonTempDialError {
+ return nil, connectionErrorf(isTemporary(err), err, "transport: error while dialing: %v", err)
+ }
+ return nil, connectionErrorf(true, err, "transport: Error while dialing %v", err)
+ }
+ // Any further errors will close the underlying connection
+ defer func(conn net.Conn) {
+ if err != nil {
+ conn.Close()
+ }
+ }(conn)
+ kp := opts.KeepaliveParams
+ // Validate keepalive parameters.
+ if kp.Time == 0 {
+ kp.Time = defaultClientKeepaliveTime
+ }
+ if kp.Timeout == 0 {
+ kp.Timeout = defaultClientKeepaliveTimeout
+ }
+ keepaliveEnabled := false
+ if kp.Time != infinity {
+ if err = syscall.SetTCPUserTimeout(conn, kp.Timeout); err != nil {
+ return nil, connectionErrorf(false, err, "transport: failed to set TCP_USER_TIMEOUT: %v", err)
+ }
+ keepaliveEnabled = true
+ }
+ var (
+ isSecure bool
+ authInfo credentials.AuthInfo
+ )
+ transportCreds := opts.TransportCredentials
+ perRPCCreds := opts.PerRPCCredentials
+
+ if b := opts.CredsBundle; b != nil {
+ if t := b.TransportCredentials(); t != nil {
+ transportCreds = t
+ }
+ if t := b.PerRPCCredentials(); t != nil {
+ perRPCCreds = append(perRPCCreds, t)
+ }
+ }
+ if transportCreds != nil {
+ scheme = "https"
+ conn, authInfo, err = transportCreds.ClientHandshake(connectCtx, addr.Authority, conn)
+ if err != nil {
+ return nil, connectionErrorf(isTemporary(err), err, "transport: authentication handshake failed: %v", err)
+ }
+ isSecure = true
+ }
+ dynamicWindow := true
+ icwz := int32(initialWindowSize)
+ if opts.InitialConnWindowSize >= defaultWindowSize {
+ icwz = opts.InitialConnWindowSize
+ dynamicWindow = false
+ }
+ writeBufSize := opts.WriteBufferSize
+ readBufSize := opts.ReadBufferSize
+ maxHeaderListSize := defaultClientMaxHeaderListSize
+ if opts.MaxHeaderListSize != nil {
+ maxHeaderListSize = *opts.MaxHeaderListSize
+ }
+ t := &http2Client{
+ ctx: ctx,
+ ctxDone: ctx.Done(), // Cache Done chan.
+ cancel: cancel,
+ userAgent: opts.UserAgent,
+ md: addr.Metadata,
+ conn: conn,
+ remoteAddr: conn.RemoteAddr(),
+ localAddr: conn.LocalAddr(),
+ authInfo: authInfo,
+ readerDone: make(chan struct{}),
+ writerDone: make(chan struct{}),
+ goAway: make(chan struct{}),
+ framer: newFramer(conn, writeBufSize, readBufSize, maxHeaderListSize),
+ fc: &trInFlow{limit: uint32(icwz)},
+ scheme: scheme,
+ activeStreams: make(map[uint32]*Stream),
+ isSecure: isSecure,
+ perRPCCreds: perRPCCreds,
+ kp: kp,
+ statsHandler: opts.StatsHandler,
+ initialWindowSize: initialWindowSize,
+ onPrefaceReceipt: onPrefaceReceipt,
+ nextID: 1,
+ maxConcurrentStreams: defaultMaxStreamsClient,
+ streamQuota: defaultMaxStreamsClient,
+ streamsQuotaAvailable: make(chan struct{}, 1),
+ czData: new(channelzData),
+ onGoAway: onGoAway,
+ onClose: onClose,
+ keepaliveEnabled: keepaliveEnabled,
+ bufferPool: newBufferPool(),
+ }
+ t.controlBuf = newControlBuffer(t.ctxDone)
+ if opts.InitialWindowSize >= defaultWindowSize {
+ t.initialWindowSize = opts.InitialWindowSize
+ dynamicWindow = false
+ }
+ if dynamicWindow {
+ t.bdpEst = &bdpEstimator{
+ bdp: initialWindowSize,
+ updateFlowControl: t.updateFlowControl,
+ }
+ }
+ if t.statsHandler != nil {
+ t.ctx = t.statsHandler.TagConn(t.ctx, &stats.ConnTagInfo{
+ RemoteAddr: t.remoteAddr,
+ LocalAddr: t.localAddr,
+ })
+ connBegin := &stats.ConnBegin{
+ Client: true,
+ }
+ t.statsHandler.HandleConn(t.ctx, connBegin)
+ }
+ if channelz.IsOn() {
+ t.channelzID = channelz.RegisterNormalSocket(t, opts.ChannelzParentID, fmt.Sprintf("%s -> %s", t.localAddr, t.remoteAddr))
+ }
+ if t.keepaliveEnabled {
+ t.kpDormancyCond = sync.NewCond(&t.mu)
+ go t.keepalive()
+ }
+ // Start the reader goroutine for incoming message. Each transport has
+ // a dedicated goroutine which reads HTTP2 frame from network. Then it
+ // dispatches the frame to the corresponding stream entity.
+ go t.reader()
+
+ // Send connection preface to server.
+ n, err := t.conn.Write(clientPreface)
+ if err != nil {
+ t.Close()
+ return nil, connectionErrorf(true, err, "transport: failed to write client preface: %v", err)
+ }
+ if n != len(clientPreface) {
+ t.Close()
+ return nil, connectionErrorf(true, err, "transport: preface mismatch, wrote %d bytes; want %d", n, len(clientPreface))
+ }
+ var ss []http2.Setting
+
+ if t.initialWindowSize != defaultWindowSize {
+ ss = append(ss, http2.Setting{
+ ID: http2.SettingInitialWindowSize,
+ Val: uint32(t.initialWindowSize),
+ })
+ }
+ if opts.MaxHeaderListSize != nil {
+ ss = append(ss, http2.Setting{
+ ID: http2.SettingMaxHeaderListSize,
+ Val: *opts.MaxHeaderListSize,
+ })
+ }
+ err = t.framer.fr.WriteSettings(ss...)
+ if err != nil {
+ t.Close()
+ return nil, connectionErrorf(true, err, "transport: failed to write initial settings frame: %v", err)
+ }
+ // Adjust the connection flow control window if needed.
+ if delta := uint32(icwz - defaultWindowSize); delta > 0 {
+ if err := t.framer.fr.WriteWindowUpdate(0, delta); err != nil {
+ t.Close()
+ return nil, connectionErrorf(true, err, "transport: failed to write window update: %v", err)
+ }
+ }
+
+ if err := t.framer.writer.Flush(); err != nil {
+ return nil, err
+ }
+ go func() {
+ t.loopy = newLoopyWriter(clientSide, t.framer, t.controlBuf, t.bdpEst)
+ err := t.loopy.run()
+ if err != nil {
+ errorf("transport: loopyWriter.run returning. Err: %v", err)
+ }
+ // If it's a connection error, let reader goroutine handle it
+ // since there might be data in the buffers.
+ if _, ok := err.(net.Error); !ok {
+ t.conn.Close()
+ }
+ close(t.writerDone)
+ }()
+ return t, nil
+}
+
+func (t *http2Client) newStream(ctx context.Context, callHdr *CallHdr) *Stream {
+ // TODO(zhaoq): Handle uint32 overflow of Stream.id.
+ s := &Stream{
+ ct: t,
+ done: make(chan struct{}),
+ method: callHdr.Method,
+ sendCompress: callHdr.SendCompress,
+ buf: newRecvBuffer(),
+ headerChan: make(chan struct{}),
+ contentSubtype: callHdr.ContentSubtype,
+ }
+ s.wq = newWriteQuota(defaultWriteQuota, s.done)
+ s.requestRead = func(n int) {
+ t.adjustWindow(s, uint32(n))
+ }
+ // The client side stream context should have exactly the same life cycle with the user provided context.
+ // That means, s.ctx should be read-only. And s.ctx is done iff ctx is done.
+ // So we use the original context here instead of creating a copy.
+ s.ctx = ctx
+ s.trReader = &transportReader{
+ reader: &recvBufferReader{
+ ctx: s.ctx,
+ ctxDone: s.ctx.Done(),
+ recv: s.buf,
+ closeStream: func(err error) {
+ t.CloseStream(s, err)
+ },
+ freeBuffer: t.bufferPool.put,
+ },
+ windowHandler: func(n int) {
+ t.updateWindow(s, uint32(n))
+ },
+ }
+ return s
+}
+
+func (t *http2Client) getPeer() *peer.Peer {
+ return &peer.Peer{
+ Addr: t.remoteAddr,
+ AuthInfo: t.authInfo,
+ }
+}
+
+func (t *http2Client) createHeaderFields(ctx context.Context, callHdr *CallHdr) ([]hpack.HeaderField, error) {
+ aud := t.createAudience(callHdr)
+ ri := credentials.RequestInfo{
+ Method: callHdr.Method,
+ }
+ ctxWithRequestInfo := internal.NewRequestInfoContext.(func(context.Context, credentials.RequestInfo) context.Context)(ctx, ri)
+ authData, err := t.getTrAuthData(ctxWithRequestInfo, aud)
+ if err != nil {
+ return nil, err
+ }
+ callAuthData, err := t.getCallAuthData(ctxWithRequestInfo, aud, callHdr)
+ if err != nil {
+ return nil, err
+ }
+ // TODO(mmukhi): Benchmark if the performance gets better if count the metadata and other header fields
+ // first and create a slice of that exact size.
+ // Make the slice of certain predictable size to reduce allocations made by append.
+ hfLen := 7 // :method, :scheme, :path, :authority, content-type, user-agent, te
+ hfLen += len(authData) + len(callAuthData)
+ headerFields := make([]hpack.HeaderField, 0, hfLen)
+ headerFields = append(headerFields, hpack.HeaderField{Name: ":method", Value: "POST"})
+ headerFields = append(headerFields, hpack.HeaderField{Name: ":scheme", Value: t.scheme})
+ headerFields = append(headerFields, hpack.HeaderField{Name: ":path", Value: callHdr.Method})
+ headerFields = append(headerFields, hpack.HeaderField{Name: ":authority", Value: callHdr.Host})
+ headerFields = append(headerFields, hpack.HeaderField{Name: "content-type", Value: contentType(callHdr.ContentSubtype)})
+ headerFields = append(headerFields, hpack.HeaderField{Name: "user-agent", Value: t.userAgent})
+ headerFields = append(headerFields, hpack.HeaderField{Name: "te", Value: "trailers"})
+ if callHdr.PreviousAttempts > 0 {
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-previous-rpc-attempts", Value: strconv.Itoa(callHdr.PreviousAttempts)})
+ }
+
+ if callHdr.SendCompress != "" {
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-encoding", Value: callHdr.SendCompress})
+ }
+ if dl, ok := ctx.Deadline(); ok {
+ // Send out timeout regardless its value. The server can detect timeout context by itself.
+ // TODO(mmukhi): Perhaps this field should be updated when actually writing out to the wire.
+ timeout := time.Until(dl)
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-timeout", Value: encodeTimeout(timeout)})
+ }
+ for k, v := range authData {
+ headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)})
+ }
+ for k, v := range callAuthData {
+ headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)})
+ }
+ if b := stats.OutgoingTags(ctx); b != nil {
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-tags-bin", Value: encodeBinHeader(b)})
+ }
+ if b := stats.OutgoingTrace(ctx); b != nil {
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-trace-bin", Value: encodeBinHeader(b)})
+ }
+
+ if md, added, ok := metadata.FromOutgoingContextRaw(ctx); ok {
+ var k string
+ for k, vv := range md {
+ // HTTP doesn't allow you to set pseudoheaders after non pseudoheaders were set.
+ if isReservedHeader(k) {
+ continue
+ }
+ for _, v := range vv {
+ headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)})
+ }
+ }
+ for _, vv := range added {
+ for i, v := range vv {
+ if i%2 == 0 {
+ k = v
+ continue
+ }
+ // HTTP doesn't allow you to set pseudoheaders after non pseudoheaders were set.
+ if isReservedHeader(k) {
+ continue
+ }
+ headerFields = append(headerFields, hpack.HeaderField{Name: strings.ToLower(k), Value: encodeMetadataHeader(k, v)})
+ }
+ }
+ }
+ if md, ok := t.md.(*metadata.MD); ok {
+ for k, vv := range *md {
+ if isReservedHeader(k) {
+ continue
+ }
+ for _, v := range vv {
+ headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)})
+ }
+ }
+ }
+ return headerFields, nil
+}
+
+func (t *http2Client) createAudience(callHdr *CallHdr) string {
+ // Create an audience string only if needed.
+ if len(t.perRPCCreds) == 0 && callHdr.Creds == nil {
+ return ""
+ }
+ // Construct URI required to get auth request metadata.
+ // Omit port if it is the default one.
+ host := strings.TrimSuffix(callHdr.Host, ":443")
+ pos := strings.LastIndex(callHdr.Method, "/")
+ if pos == -1 {
+ pos = len(callHdr.Method)
+ }
+ return "https://" + host + callHdr.Method[:pos]
+}
+
+func (t *http2Client) getTrAuthData(ctx context.Context, audience string) (map[string]string, error) {
+ if len(t.perRPCCreds) == 0 {
+ return nil, nil
+ }
+ authData := map[string]string{}
+ for _, c := range t.perRPCCreds {
+ data, err := c.GetRequestMetadata(ctx, audience)
+ if err != nil {
+ if _, ok := status.FromError(err); ok {
+ return nil, err
+ }
+
+ return nil, status.Errorf(codes.Unauthenticated, "transport: %v", err)
+ }
+ for k, v := range data {
+ // Capital header names are illegal in HTTP/2.
+ k = strings.ToLower(k)
+ authData[k] = v
+ }
+ }
+ return authData, nil
+}
+
+func (t *http2Client) getCallAuthData(ctx context.Context, audience string, callHdr *CallHdr) (map[string]string, error) {
+ var callAuthData map[string]string
+ // Check if credentials.PerRPCCredentials were provided via call options.
+ // Note: if these credentials are provided both via dial options and call
+ // options, then both sets of credentials will be applied.
+ if callCreds := callHdr.Creds; callCreds != nil {
+ if !t.isSecure && callCreds.RequireTransportSecurity() {
+ return nil, status.Error(codes.Unauthenticated, "transport: cannot send secure credentials on an insecure connection")
+ }
+ data, err := callCreds.GetRequestMetadata(ctx, audience)
+ if err != nil {
+ return nil, status.Errorf(codes.Internal, "transport: %v", err)
+ }
+ callAuthData = make(map[string]string, len(data))
+ for k, v := range data {
+ // Capital header names are illegal in HTTP/2
+ k = strings.ToLower(k)
+ callAuthData[k] = v
+ }
+ }
+ return callAuthData, nil
+}
+
+// NewStream creates a stream and registers it into the transport as "active"
+// streams.
+func (t *http2Client) NewStream(ctx context.Context, callHdr *CallHdr) (_ *Stream, err error) {
+ ctx = peer.NewContext(ctx, t.getPeer())
+ headerFields, err := t.createHeaderFields(ctx, callHdr)
+ if err != nil {
+ return nil, err
+ }
+ s := t.newStream(ctx, callHdr)
+ cleanup := func(err error) {
+ if s.swapState(streamDone) == streamDone {
+ // If it was already done, return.
+ return
+ }
+ // The stream was unprocessed by the server.
+ atomic.StoreUint32(&s.unprocessed, 1)
+ s.write(recvMsg{err: err})
+ close(s.done)
+ // If headerChan isn't closed, then close it.
+ if atomic.CompareAndSwapUint32(&s.headerChanClosed, 0, 1) {
+ close(s.headerChan)
+ }
+ }
+ hdr := &headerFrame{
+ hf: headerFields,
+ endStream: false,
+ initStream: func(id uint32) error {
+ t.mu.Lock()
+ if state := t.state; state != reachable {
+ t.mu.Unlock()
+ // Do a quick cleanup.
+ err := error(errStreamDrain)
+ if state == closing {
+ err = ErrConnClosing
+ }
+ cleanup(err)
+ return err
+ }
+ t.activeStreams[id] = s
+ if channelz.IsOn() {
+ atomic.AddInt64(&t.czData.streamsStarted, 1)
+ atomic.StoreInt64(&t.czData.lastStreamCreatedTime, time.Now().UnixNano())
+ }
+ // If the keepalive goroutine has gone dormant, wake it up.
+ if t.kpDormant {
+ t.kpDormancyCond.Signal()
+ }
+ t.mu.Unlock()
+ return nil
+ },
+ onOrphaned: cleanup,
+ wq: s.wq,
+ }
+ firstTry := true
+ var ch chan struct{}
+ checkForStreamQuota := func(it interface{}) bool {
+ if t.streamQuota <= 0 { // Can go negative if server decreases it.
+ if firstTry {
+ t.waitingStreams++
+ }
+ ch = t.streamsQuotaAvailable
+ return false
+ }
+ if !firstTry {
+ t.waitingStreams--
+ }
+ t.streamQuota--
+ h := it.(*headerFrame)
+ h.streamID = t.nextID
+ t.nextID += 2
+ s.id = h.streamID
+ s.fc = &inFlow{limit: uint32(t.initialWindowSize)}
+ if t.streamQuota > 0 && t.waitingStreams > 0 {
+ select {
+ case t.streamsQuotaAvailable <- struct{}{}:
+ default:
+ }
+ }
+ return true
+ }
+ var hdrListSizeErr error
+ checkForHeaderListSize := func(it interface{}) bool {
+ if t.maxSendHeaderListSize == nil {
+ return true
+ }
+ hdrFrame := it.(*headerFrame)
+ var sz int64
+ for _, f := range hdrFrame.hf {
+ if sz += int64(f.Size()); sz > int64(*t.maxSendHeaderListSize) {
+ hdrListSizeErr = status.Errorf(codes.Internal, "header list size to send violates the maximum size (%d bytes) set by server", *t.maxSendHeaderListSize)
+ return false
+ }
+ }
+ return true
+ }
+ for {
+ success, err := t.controlBuf.executeAndPut(func(it interface{}) bool {
+ if !checkForStreamQuota(it) {
+ return false
+ }
+ if !checkForHeaderListSize(it) {
+ return false
+ }
+ return true
+ }, hdr)
+ if err != nil {
+ return nil, err
+ }
+ if success {
+ break
+ }
+ if hdrListSizeErr != nil {
+ return nil, hdrListSizeErr
+ }
+ firstTry = false
+ select {
+ case <-ch:
+ case <-s.ctx.Done():
+ return nil, ContextErr(s.ctx.Err())
+ case <-t.goAway:
+ return nil, errStreamDrain
+ case <-t.ctx.Done():
+ return nil, ErrConnClosing
+ }
+ }
+ if t.statsHandler != nil {
+ outHeader := &stats.OutHeader{
+ Client: true,
+ FullMethod: callHdr.Method,
+ RemoteAddr: t.remoteAddr,
+ LocalAddr: t.localAddr,
+ Compression: callHdr.SendCompress,
+ }
+ t.statsHandler.HandleRPC(s.ctx, outHeader)
+ }
+ return s, nil
+}
+
+// CloseStream clears the footprint of a stream when the stream is not needed any more.
+// This must not be executed in reader's goroutine.
+func (t *http2Client) CloseStream(s *Stream, err error) {
+ var (
+ rst bool
+ rstCode http2.ErrCode
+ )
+ if err != nil {
+ rst = true
+ rstCode = http2.ErrCodeCancel
+ }
+ t.closeStream(s, err, rst, rstCode, status.Convert(err), nil, false)
+}
+
+func (t *http2Client) closeStream(s *Stream, err error, rst bool, rstCode http2.ErrCode, st *status.Status, mdata map[string][]string, eosReceived bool) {
+ // Set stream status to done.
+ if s.swapState(streamDone) == streamDone {
+ // If it was already done, return. If multiple closeStream calls
+ // happen simultaneously, wait for the first to finish.
+ <-s.done
+ return
+ }
+ // status and trailers can be updated here without any synchronization because the stream goroutine will
+ // only read it after it sees an io.EOF error from read or write and we'll write those errors
+ // only after updating this.
+ s.status = st
+ if len(mdata) > 0 {
+ s.trailer = mdata
+ }
+ if err != nil {
+ // This will unblock reads eventually.
+ s.write(recvMsg{err: err})
+ }
+ // If headerChan isn't closed, then close it.
+ if atomic.CompareAndSwapUint32(&s.headerChanClosed, 0, 1) {
+ s.noHeaders = true
+ close(s.headerChan)
+ }
+ cleanup := &cleanupStream{
+ streamID: s.id,
+ onWrite: func() {
+ t.mu.Lock()
+ if t.activeStreams != nil {
+ delete(t.activeStreams, s.id)
+ }
+ t.mu.Unlock()
+ if channelz.IsOn() {
+ if eosReceived {
+ atomic.AddInt64(&t.czData.streamsSucceeded, 1)
+ } else {
+ atomic.AddInt64(&t.czData.streamsFailed, 1)
+ }
+ }
+ },
+ rst: rst,
+ rstCode: rstCode,
+ }
+ addBackStreamQuota := func(interface{}) bool {
+ t.streamQuota++
+ if t.streamQuota > 0 && t.waitingStreams > 0 {
+ select {
+ case t.streamsQuotaAvailable <- struct{}{}:
+ default:
+ }
+ }
+ return true
+ }
+ t.controlBuf.executeAndPut(addBackStreamQuota, cleanup)
+ // This will unblock write.
+ close(s.done)
+}
+
+// Close kicks off the shutdown process of the transport. This should be called
+// only once on a transport. Once it is called, the transport should not be
+// accessed any more.
+//
+// This method blocks until the addrConn that initiated this transport is
+// re-connected. This happens because t.onClose() begins reconnect logic at the
+// addrConn level and blocks until the addrConn is successfully connected.
+func (t *http2Client) Close() error {
+ t.mu.Lock()
+ // Make sure we only Close once.
+ if t.state == closing {
+ t.mu.Unlock()
+ return nil
+ }
+ // Call t.onClose before setting the state to closing to prevent the client
+ // from attempting to create new streams ASAP.
+ t.onClose()
+ t.state = closing
+ streams := t.activeStreams
+ t.activeStreams = nil
+ if t.kpDormant {
+ // If the keepalive goroutine is blocked on this condition variable, we
+ // should unblock it so that the goroutine eventually exits.
+ t.kpDormancyCond.Signal()
+ }
+ t.mu.Unlock()
+ t.controlBuf.finish()
+ t.cancel()
+ err := t.conn.Close()
+ if channelz.IsOn() {
+ channelz.RemoveEntry(t.channelzID)
+ }
+ // Notify all active streams.
+ for _, s := range streams {
+ t.closeStream(s, ErrConnClosing, false, http2.ErrCodeNo, status.New(codes.Unavailable, ErrConnClosing.Desc), nil, false)
+ }
+ if t.statsHandler != nil {
+ connEnd := &stats.ConnEnd{
+ Client: true,
+ }
+ t.statsHandler.HandleConn(t.ctx, connEnd)
+ }
+ return err
+}
+
+// GracefulClose sets the state to draining, which prevents new streams from
+// being created and causes the transport to be closed when the last active
+// stream is closed. If there are no active streams, the transport is closed
+// immediately. This does nothing if the transport is already draining or
+// closing.
+func (t *http2Client) GracefulClose() {
+ t.mu.Lock()
+ // Make sure we move to draining only from active.
+ if t.state == draining || t.state == closing {
+ t.mu.Unlock()
+ return
+ }
+ t.state = draining
+ active := len(t.activeStreams)
+ t.mu.Unlock()
+ if active == 0 {
+ t.Close()
+ return
+ }
+ t.controlBuf.put(&incomingGoAway{})
+}
+
+// Write formats the data into HTTP2 data frame(s) and sends it out. The caller
+// should proceed only if Write returns nil.
+func (t *http2Client) Write(s *Stream, hdr []byte, data []byte, opts *Options) error {
+ if opts.Last {
+ // If it's the last message, update stream state.
+ if !s.compareAndSwapState(streamActive, streamWriteDone) {
+ return errStreamDone
+ }
+ } else if s.getState() != streamActive {
+ return errStreamDone
+ }
+ df := &dataFrame{
+ streamID: s.id,
+ endStream: opts.Last,
+ }
+ if hdr != nil || data != nil { // If it's not an empty data frame.
+ // Add some data to grpc message header so that we can equally
+ // distribute bytes across frames.
+ emptyLen := http2MaxFrameLen - len(hdr)
+ if emptyLen > len(data) {
+ emptyLen = len(data)
+ }
+ hdr = append(hdr, data[:emptyLen]...)
+ data = data[emptyLen:]
+ df.h, df.d = hdr, data
+ // TODO(mmukhi): The above logic in this if can be moved to loopyWriter's data handler.
+ if err := s.wq.get(int32(len(hdr) + len(data))); err != nil {
+ return err
+ }
+ }
+ return t.controlBuf.put(df)
+}
+
+func (t *http2Client) getStream(f http2.Frame) *Stream {
+ t.mu.Lock()
+ s := t.activeStreams[f.Header().StreamID]
+ t.mu.Unlock()
+ return s
+}
+
+// adjustWindow sends out extra window update over the initial window size
+// of stream if the application is requesting data larger in size than
+// the window.
+func (t *http2Client) adjustWindow(s *Stream, n uint32) {
+ if w := s.fc.maybeAdjust(n); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{streamID: s.id, increment: w})
+ }
+}
+
+// updateWindow adjusts the inbound quota for the stream.
+// Window updates will be sent out when the cumulative quota
+// exceeds the corresponding threshold.
+func (t *http2Client) updateWindow(s *Stream, n uint32) {
+ if w := s.fc.onRead(n); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{streamID: s.id, increment: w})
+ }
+}
+
+// updateFlowControl updates the incoming flow control windows
+// for the transport and the stream based on the current bdp
+// estimation.
+func (t *http2Client) updateFlowControl(n uint32) {
+ t.mu.Lock()
+ for _, s := range t.activeStreams {
+ s.fc.newLimit(n)
+ }
+ t.mu.Unlock()
+ updateIWS := func(interface{}) bool {
+ t.initialWindowSize = int32(n)
+ return true
+ }
+ t.controlBuf.executeAndPut(updateIWS, &outgoingWindowUpdate{streamID: 0, increment: t.fc.newLimit(n)})
+ t.controlBuf.put(&outgoingSettings{
+ ss: []http2.Setting{
+ {
+ ID: http2.SettingInitialWindowSize,
+ Val: n,
+ },
+ },
+ })
+}
+
+func (t *http2Client) handleData(f *http2.DataFrame) {
+ size := f.Header().Length
+ var sendBDPPing bool
+ if t.bdpEst != nil {
+ sendBDPPing = t.bdpEst.add(size)
+ }
+ // Decouple connection's flow control from application's read.
+ // An update on connection's flow control should not depend on
+ // whether user application has read the data or not. Such a
+ // restriction is already imposed on the stream's flow control,
+ // and therefore the sender will be blocked anyways.
+ // Decoupling the connection flow control will prevent other
+ // active(fast) streams from starving in presence of slow or
+ // inactive streams.
+ //
+ if w := t.fc.onData(size); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{
+ streamID: 0,
+ increment: w,
+ })
+ }
+ if sendBDPPing {
+ // Avoid excessive ping detection (e.g. in an L7 proxy)
+ // by sending a window update prior to the BDP ping.
+
+ if w := t.fc.reset(); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{
+ streamID: 0,
+ increment: w,
+ })
+ }
+
+ t.controlBuf.put(bdpPing)
+ }
+ // Select the right stream to dispatch.
+ s := t.getStream(f)
+ if s == nil {
+ return
+ }
+ if size > 0 {
+ if err := s.fc.onData(size); err != nil {
+ t.closeStream(s, io.EOF, true, http2.ErrCodeFlowControl, status.New(codes.Internal, err.Error()), nil, false)
+ return
+ }
+ if f.Header().Flags.Has(http2.FlagDataPadded) {
+ if w := s.fc.onRead(size - uint32(len(f.Data()))); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{s.id, w})
+ }
+ }
+ // TODO(bradfitz, zhaoq): A copy is required here because there is no
+ // guarantee f.Data() is consumed before the arrival of next frame.
+ // Can this copy be eliminated?
+ if len(f.Data()) > 0 {
+ buffer := t.bufferPool.get()
+ buffer.Reset()
+ buffer.Write(f.Data())
+ s.write(recvMsg{buffer: buffer})
+ }
+ }
+ // The server has closed the stream without sending trailers. Record that
+ // the read direction is closed, and set the status appropriately.
+ if f.FrameHeader.Flags.Has(http2.FlagDataEndStream) {
+ t.closeStream(s, io.EOF, false, http2.ErrCodeNo, status.New(codes.Internal, "server closed the stream without sending trailers"), nil, true)
+ }
+}
+
+func (t *http2Client) handleRSTStream(f *http2.RSTStreamFrame) {
+ s := t.getStream(f)
+ if s == nil {
+ return
+ }
+ if f.ErrCode == http2.ErrCodeRefusedStream {
+ // The stream was unprocessed by the server.
+ atomic.StoreUint32(&s.unprocessed, 1)
+ }
+ statusCode, ok := http2ErrConvTab[f.ErrCode]
+ if !ok {
+ warningf("transport: http2Client.handleRSTStream found no mapped gRPC status for the received http2 error %v", f.ErrCode)
+ statusCode = codes.Unknown
+ }
+ if statusCode == codes.Canceled {
+ if d, ok := s.ctx.Deadline(); ok && !d.After(time.Now()) {
+ // Our deadline was already exceeded, and that was likely the cause
+ // of this cancelation. Alter the status code accordingly.
+ statusCode = codes.DeadlineExceeded
+ }
+ }
+ t.closeStream(s, io.EOF, false, http2.ErrCodeNo, status.Newf(statusCode, "stream terminated by RST_STREAM with error code: %v", f.ErrCode), nil, false)
+}
+
+func (t *http2Client) handleSettings(f *http2.SettingsFrame, isFirst bool) {
+ if f.IsAck() {
+ return
+ }
+ var maxStreams *uint32
+ var ss []http2.Setting
+ var updateFuncs []func()
+ f.ForeachSetting(func(s http2.Setting) error {
+ switch s.ID {
+ case http2.SettingMaxConcurrentStreams:
+ maxStreams = new(uint32)
+ *maxStreams = s.Val
+ case http2.SettingMaxHeaderListSize:
+ updateFuncs = append(updateFuncs, func() {
+ t.maxSendHeaderListSize = new(uint32)
+ *t.maxSendHeaderListSize = s.Val
+ })
+ default:
+ ss = append(ss, s)
+ }
+ return nil
+ })
+ if isFirst && maxStreams == nil {
+ maxStreams = new(uint32)
+ *maxStreams = math.MaxUint32
+ }
+ sf := &incomingSettings{
+ ss: ss,
+ }
+ if maxStreams != nil {
+ updateStreamQuota := func() {
+ delta := int64(*maxStreams) - int64(t.maxConcurrentStreams)
+ t.maxConcurrentStreams = *maxStreams
+ t.streamQuota += delta
+ if delta > 0 && t.waitingStreams > 0 {
+ close(t.streamsQuotaAvailable) // wake all of them up.
+ t.streamsQuotaAvailable = make(chan struct{}, 1)
+ }
+ }
+ updateFuncs = append(updateFuncs, updateStreamQuota)
+ }
+ t.controlBuf.executeAndPut(func(interface{}) bool {
+ for _, f := range updateFuncs {
+ f()
+ }
+ return true
+ }, sf)
+}
+
+func (t *http2Client) handlePing(f *http2.PingFrame) {
+ if f.IsAck() {
+ // Maybe it's a BDP ping.
+ if t.bdpEst != nil {
+ t.bdpEst.calculate(f.Data)
+ }
+ return
+ }
+ pingAck := &ping{ack: true}
+ copy(pingAck.data[:], f.Data[:])
+ t.controlBuf.put(pingAck)
+}
+
+func (t *http2Client) handleGoAway(f *http2.GoAwayFrame) {
+ t.mu.Lock()
+ if t.state == closing {
+ t.mu.Unlock()
+ return
+ }
+ if f.ErrCode == http2.ErrCodeEnhanceYourCalm {
+ infof("Client received GoAway with http2.ErrCodeEnhanceYourCalm.")
+ }
+ id := f.LastStreamID
+ if id > 0 && id%2 != 1 {
+ t.mu.Unlock()
+ t.Close()
+ return
+ }
+ // A client can receive multiple GoAways from the server (see
+ // https://github.com/grpc/grpc-go/issues/1387). The idea is that the first
+ // GoAway will be sent with an ID of MaxInt32 and the second GoAway will be
+ // sent after an RTT delay with the ID of the last stream the server will
+ // process.
+ //
+ // Therefore, when we get the first GoAway we don't necessarily close any
+ // streams. While in case of second GoAway we close all streams created after
+ // the GoAwayId. This way streams that were in-flight while the GoAway from
+ // server was being sent don't get killed.
+ select {
+ case <-t.goAway: // t.goAway has been closed (i.e.,multiple GoAways).
+ // If there are multiple GoAways the first one should always have an ID greater than the following ones.
+ if id > t.prevGoAwayID {
+ t.mu.Unlock()
+ t.Close()
+ return
+ }
+ default:
+ t.setGoAwayReason(f)
+ close(t.goAway)
+ t.controlBuf.put(&incomingGoAway{})
+ // Notify the clientconn about the GOAWAY before we set the state to
+ // draining, to allow the client to stop attempting to create streams
+ // before disallowing new streams on this connection.
+ t.onGoAway(t.goAwayReason)
+ t.state = draining
+ }
+ // All streams with IDs greater than the GoAwayId
+ // and smaller than the previous GoAway ID should be killed.
+ upperLimit := t.prevGoAwayID
+ if upperLimit == 0 { // This is the first GoAway Frame.
+ upperLimit = math.MaxUint32 // Kill all streams after the GoAway ID.
+ }
+ for streamID, stream := range t.activeStreams {
+ if streamID > id && streamID <= upperLimit {
+ // The stream was unprocessed by the server.
+ atomic.StoreUint32(&stream.unprocessed, 1)
+ t.closeStream(stream, errStreamDrain, false, http2.ErrCodeNo, statusGoAway, nil, false)
+ }
+ }
+ t.prevGoAwayID = id
+ active := len(t.activeStreams)
+ t.mu.Unlock()
+ if active == 0 {
+ t.Close()
+ }
+}
+
+// setGoAwayReason sets the value of t.goAwayReason based
+// on the GoAway frame received.
+// It expects a lock on transport's mutext to be held by
+// the caller.
+func (t *http2Client) setGoAwayReason(f *http2.GoAwayFrame) {
+ t.goAwayReason = GoAwayNoReason
+ switch f.ErrCode {
+ case http2.ErrCodeEnhanceYourCalm:
+ if string(f.DebugData()) == "too_many_pings" {
+ t.goAwayReason = GoAwayTooManyPings
+ }
+ }
+}
+
+func (t *http2Client) GetGoAwayReason() GoAwayReason {
+ t.mu.Lock()
+ defer t.mu.Unlock()
+ return t.goAwayReason
+}
+
+func (t *http2Client) handleWindowUpdate(f *http2.WindowUpdateFrame) {
+ t.controlBuf.put(&incomingWindowUpdate{
+ streamID: f.Header().StreamID,
+ increment: f.Increment,
+ })
+}
+
+// operateHeaders takes action on the decoded headers.
+func (t *http2Client) operateHeaders(frame *http2.MetaHeadersFrame) {
+ s := t.getStream(frame)
+ if s == nil {
+ return
+ }
+ endStream := frame.StreamEnded()
+ atomic.StoreUint32(&s.bytesReceived, 1)
+ initialHeader := atomic.LoadUint32(&s.headerChanClosed) == 0
+
+ if !initialHeader && !endStream {
+ // As specified by gRPC over HTTP2, a HEADERS frame (and associated CONTINUATION frames) can only appear at the start or end of a stream. Therefore, second HEADERS frame must have EOS bit set.
+ st := status.New(codes.Internal, "a HEADERS frame cannot appear in the middle of a stream")
+ t.closeStream(s, st.Err(), true, http2.ErrCodeProtocol, st, nil, false)
+ return
+ }
+
+ state := &decodeState{}
+ // Initialize isGRPC value to be !initialHeader, since if a gRPC Response-Headers has already been received, then it means that the peer is speaking gRPC and we are in gRPC mode.
+ state.data.isGRPC = !initialHeader
+ if err := state.decodeHeader(frame); err != nil {
+ t.closeStream(s, err, true, http2.ErrCodeProtocol, status.Convert(err), nil, endStream)
+ return
+ }
+
+ isHeader := false
+ defer func() {
+ if t.statsHandler != nil {
+ if isHeader {
+ inHeader := &stats.InHeader{
+ Client: true,
+ WireLength: int(frame.Header().Length),
+ }
+ t.statsHandler.HandleRPC(s.ctx, inHeader)
+ } else {
+ inTrailer := &stats.InTrailer{
+ Client: true,
+ WireLength: int(frame.Header().Length),
+ }
+ t.statsHandler.HandleRPC(s.ctx, inTrailer)
+ }
+ }
+ }()
+
+ // If headerChan hasn't been closed yet
+ if atomic.CompareAndSwapUint32(&s.headerChanClosed, 0, 1) {
+ s.headerValid = true
+ if !endStream {
+ // HEADERS frame block carries a Response-Headers.
+ isHeader = true
+ // These values can be set without any synchronization because
+ // stream goroutine will read it only after seeing a closed
+ // headerChan which we'll close after setting this.
+ s.recvCompress = state.data.encoding
+ if len(state.data.mdata) > 0 {
+ s.header = state.data.mdata
+ }
+ } else {
+ // HEADERS frame block carries a Trailers-Only.
+ s.noHeaders = true
+ }
+ close(s.headerChan)
+ }
+
+ if !endStream {
+ return
+ }
+
+ // if client received END_STREAM from server while stream was still active, send RST_STREAM
+ rst := s.getState() == streamActive
+ t.closeStream(s, io.EOF, rst, http2.ErrCodeNo, state.status(), state.data.mdata, true)
+}
+
+// reader runs as a separate goroutine in charge of reading data from network
+// connection.
+//
+// TODO(zhaoq): currently one reader per transport. Investigate whether this is
+// optimal.
+// TODO(zhaoq): Check the validity of the incoming frame sequence.
+func (t *http2Client) reader() {
+ defer close(t.readerDone)
+ // Check the validity of server preface.
+ frame, err := t.framer.fr.ReadFrame()
+ if err != nil {
+ t.Close() // this kicks off resetTransport, so must be last before return
+ return
+ }
+ t.conn.SetReadDeadline(time.Time{}) // reset deadline once we get the settings frame (we didn't time out, yay!)
+ if t.keepaliveEnabled {
+ atomic.StoreInt64(&t.lastRead, time.Now().UnixNano())
+ }
+ sf, ok := frame.(*http2.SettingsFrame)
+ if !ok {
+ t.Close() // this kicks off resetTransport, so must be last before return
+ return
+ }
+ t.onPrefaceReceipt()
+ t.handleSettings(sf, true)
+
+ // loop to keep reading incoming messages on this transport.
+ for {
+ t.controlBuf.throttle()
+ frame, err := t.framer.fr.ReadFrame()
+ if t.keepaliveEnabled {
+ atomic.StoreInt64(&t.lastRead, time.Now().UnixNano())
+ }
+ if err != nil {
+ // Abort an active stream if the http2.Framer returns a
+ // http2.StreamError. This can happen only if the server's response
+ // is malformed http2.
+ if se, ok := err.(http2.StreamError); ok {
+ t.mu.Lock()
+ s := t.activeStreams[se.StreamID]
+ t.mu.Unlock()
+ if s != nil {
+ // use error detail to provide better err message
+ code := http2ErrConvTab[se.Code]
+ msg := t.framer.fr.ErrorDetail().Error()
+ t.closeStream(s, status.Error(code, msg), true, http2.ErrCodeProtocol, status.New(code, msg), nil, false)
+ }
+ continue
+ } else {
+ // Transport error.
+ t.Close()
+ return
+ }
+ }
+ switch frame := frame.(type) {
+ case *http2.MetaHeadersFrame:
+ t.operateHeaders(frame)
+ case *http2.DataFrame:
+ t.handleData(frame)
+ case *http2.RSTStreamFrame:
+ t.handleRSTStream(frame)
+ case *http2.SettingsFrame:
+ t.handleSettings(frame, false)
+ case *http2.PingFrame:
+ t.handlePing(frame)
+ case *http2.GoAwayFrame:
+ t.handleGoAway(frame)
+ case *http2.WindowUpdateFrame:
+ t.handleWindowUpdate(frame)
+ default:
+ errorf("transport: http2Client.reader got unhandled frame type %v.", frame)
+ }
+ }
+}
+
+func minTime(a, b time.Duration) time.Duration {
+ if a < b {
+ return a
+ }
+ return b
+}
+
+// keepalive running in a separate goroutune makes sure the connection is alive by sending pings.
+func (t *http2Client) keepalive() {
+ p := &ping{data: [8]byte{}}
+ // True iff a ping has been sent, and no data has been received since then.
+ outstandingPing := false
+ // Amount of time remaining before which we should receive an ACK for the
+ // last sent ping.
+ timeoutLeft := time.Duration(0)
+ // Records the last value of t.lastRead before we go block on the timer.
+ // This is required to check for read activity since then.
+ prevNano := time.Now().UnixNano()
+ timer := time.NewTimer(t.kp.Time)
+ for {
+ select {
+ case <-timer.C:
+ lastRead := atomic.LoadInt64(&t.lastRead)
+ if lastRead > prevNano {
+ // There has been read activity since the last time we were here.
+ outstandingPing = false
+ // Next timer should fire at kp.Time seconds from lastRead time.
+ timer.Reset(time.Duration(lastRead) + t.kp.Time - time.Duration(time.Now().UnixNano()))
+ prevNano = lastRead
+ continue
+ }
+ if outstandingPing && timeoutLeft <= 0 {
+ t.Close()
+ return
+ }
+ t.mu.Lock()
+ if t.state == closing {
+ // If the transport is closing, we should exit from the
+ // keepalive goroutine here. If not, we could have a race
+ // between the call to Signal() from Close() and the call to
+ // Wait() here, whereby the keepalive goroutine ends up
+ // blocking on the condition variable which will never be
+ // signalled again.
+ t.mu.Unlock()
+ return
+ }
+ if len(t.activeStreams) < 1 && !t.kp.PermitWithoutStream {
+ // If a ping was sent out previously (because there were active
+ // streams at that point) which wasn't acked and its timeout
+ // hadn't fired, but we got here and are about to go dormant,
+ // we should make sure that we unconditionally send a ping once
+ // we awaken.
+ outstandingPing = false
+ t.kpDormant = true
+ t.kpDormancyCond.Wait()
+ }
+ t.kpDormant = false
+ t.mu.Unlock()
+
+ // We get here either because we were dormant and a new stream was
+ // created which unblocked the Wait() call, or because the
+ // keepalive timer expired. In both cases, we need to send a ping.
+ if !outstandingPing {
+ if channelz.IsOn() {
+ atomic.AddInt64(&t.czData.kpCount, 1)
+ }
+ t.controlBuf.put(p)
+ timeoutLeft = t.kp.Timeout
+ outstandingPing = true
+ }
+ // The amount of time to sleep here is the minimum of kp.Time and
+ // timeoutLeft. This will ensure that we wait only for kp.Time
+ // before sending out the next ping (for cases where the ping is
+ // acked).
+ sleepDuration := minTime(t.kp.Time, timeoutLeft)
+ timeoutLeft -= sleepDuration
+ prevNano = lastRead
+ timer.Reset(sleepDuration)
+ case <-t.ctx.Done():
+ if !timer.Stop() {
+ <-timer.C
+ }
+ return
+ }
+ }
+}
+
+func (t *http2Client) Error() <-chan struct{} {
+ return t.ctx.Done()
+}
+
+func (t *http2Client) GoAway() <-chan struct{} {
+ return t.goAway
+}
+
+func (t *http2Client) ChannelzMetric() *channelz.SocketInternalMetric {
+ s := channelz.SocketInternalMetric{
+ StreamsStarted: atomic.LoadInt64(&t.czData.streamsStarted),
+ StreamsSucceeded: atomic.LoadInt64(&t.czData.streamsSucceeded),
+ StreamsFailed: atomic.LoadInt64(&t.czData.streamsFailed),
+ MessagesSent: atomic.LoadInt64(&t.czData.msgSent),
+ MessagesReceived: atomic.LoadInt64(&t.czData.msgRecv),
+ KeepAlivesSent: atomic.LoadInt64(&t.czData.kpCount),
+ LastLocalStreamCreatedTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastStreamCreatedTime)),
+ LastMessageSentTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastMsgSentTime)),
+ LastMessageReceivedTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastMsgRecvTime)),
+ LocalFlowControlWindow: int64(t.fc.getSize()),
+ SocketOptions: channelz.GetSocketOption(t.conn),
+ LocalAddr: t.localAddr,
+ RemoteAddr: t.remoteAddr,
+ // RemoteName :
+ }
+ if au, ok := t.authInfo.(credentials.ChannelzSecurityInfo); ok {
+ s.Security = au.GetSecurityValue()
+ }
+ s.RemoteFlowControlWindow = t.getOutFlowWindow()
+ return &s
+}
+
+func (t *http2Client) RemoteAddr() net.Addr { return t.remoteAddr }
+
+func (t *http2Client) IncrMsgSent() {
+ atomic.AddInt64(&t.czData.msgSent, 1)
+ atomic.StoreInt64(&t.czData.lastMsgSentTime, time.Now().UnixNano())
+}
+
+func (t *http2Client) IncrMsgRecv() {
+ atomic.AddInt64(&t.czData.msgRecv, 1)
+ atomic.StoreInt64(&t.czData.lastMsgRecvTime, time.Now().UnixNano())
+}
+
+func (t *http2Client) getOutFlowWindow() int64 {
+ resp := make(chan uint32, 1)
+ timer := time.NewTimer(time.Second)
+ defer timer.Stop()
+ t.controlBuf.put(&outFlowControlSizeRequest{resp})
+ select {
+ case sz := <-resp:
+ return int64(sz)
+ case <-t.ctxDone:
+ return -1
+ case <-timer.C:
+ return -2
+ }
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/http2_server.go b/vendor/google.golang.org/grpc/internal/transport/http2_server.go
new file mode 100644
index 0000000..0760383
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/http2_server.go
@@ -0,0 +1,1231 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+ "bytes"
+ "context"
+ "errors"
+ "fmt"
+ "io"
+ "math"
+ "net"
+ "strconv"
+ "sync"
+ "sync/atomic"
+ "time"
+
+ "github.com/golang/protobuf/proto"
+ "golang.org/x/net/http2"
+ "golang.org/x/net/http2/hpack"
+
+ spb "google.golang.org/genproto/googleapis/rpc/status"
+ "google.golang.org/grpc/codes"
+ "google.golang.org/grpc/credentials"
+ "google.golang.org/grpc/grpclog"
+ "google.golang.org/grpc/internal"
+ "google.golang.org/grpc/internal/channelz"
+ "google.golang.org/grpc/internal/grpcrand"
+ "google.golang.org/grpc/keepalive"
+ "google.golang.org/grpc/metadata"
+ "google.golang.org/grpc/peer"
+ "google.golang.org/grpc/stats"
+ "google.golang.org/grpc/status"
+ "google.golang.org/grpc/tap"
+)
+
+var (
+ // ErrIllegalHeaderWrite indicates that setting header is illegal because of
+ // the stream's state.
+ ErrIllegalHeaderWrite = errors.New("transport: the stream is done or WriteHeader was already called")
+ // ErrHeaderListSizeLimitViolation indicates that the header list size is larger
+ // than the limit set by peer.
+ ErrHeaderListSizeLimitViolation = errors.New("transport: trying to send header list size larger than the limit set by peer")
+ // statusRawProto is a function to get to the raw status proto wrapped in a
+ // status.Status without a proto.Clone().
+ statusRawProto = internal.StatusRawProto.(func(*status.Status) *spb.Status)
+)
+
+// http2Server implements the ServerTransport interface with HTTP2.
+type http2Server struct {
+ ctx context.Context
+ done chan struct{}
+ conn net.Conn
+ loopy *loopyWriter
+ readerDone chan struct{} // sync point to enable testing.
+ writerDone chan struct{} // sync point to enable testing.
+ remoteAddr net.Addr
+ localAddr net.Addr
+ maxStreamID uint32 // max stream ID ever seen
+ authInfo credentials.AuthInfo // auth info about the connection
+ inTapHandle tap.ServerInHandle
+ framer *framer
+ // The max number of concurrent streams.
+ maxStreams uint32
+ // controlBuf delivers all the control related tasks (e.g., window
+ // updates, reset streams, and various settings) to the controller.
+ controlBuf *controlBuffer
+ fc *trInFlow
+ stats stats.Handler
+ // Flag to keep track of reading activity on transport.
+ // 1 is true and 0 is false.
+ activity uint32 // Accessed atomically.
+ // Keepalive and max-age parameters for the server.
+ kp keepalive.ServerParameters
+
+ // Keepalive enforcement policy.
+ kep keepalive.EnforcementPolicy
+ // The time instance last ping was received.
+ lastPingAt time.Time
+ // Number of times the client has violated keepalive ping policy so far.
+ pingStrikes uint8
+ // Flag to signify that number of ping strikes should be reset to 0.
+ // This is set whenever data or header frames are sent.
+ // 1 means yes.
+ resetPingStrikes uint32 // Accessed atomically.
+ initialWindowSize int32
+ bdpEst *bdpEstimator
+ maxSendHeaderListSize *uint32
+
+ mu sync.Mutex // guard the following
+
+ // drainChan is initialized when drain(...) is called the first time.
+ // After which the server writes out the first GoAway(with ID 2^31-1) frame.
+ // Then an independent goroutine will be launched to later send the second GoAway.
+ // During this time we don't want to write another first GoAway(with ID 2^31 -1) frame.
+ // Thus call to drain(...) will be a no-op if drainChan is already initialized since draining is
+ // already underway.
+ drainChan chan struct{}
+ state transportState
+ activeStreams map[uint32]*Stream
+ // idle is the time instant when the connection went idle.
+ // This is either the beginning of the connection or when the number of
+ // RPCs go down to 0.
+ // When the connection is busy, this value is set to 0.
+ idle time.Time
+
+ // Fields below are for channelz metric collection.
+ channelzID int64 // channelz unique identification number
+ czData *channelzData
+ bufferPool *bufferPool
+}
+
+// newHTTP2Server constructs a ServerTransport based on HTTP2. ConnectionError is
+// returned if something goes wrong.
+func newHTTP2Server(conn net.Conn, config *ServerConfig) (_ ServerTransport, err error) {
+ writeBufSize := config.WriteBufferSize
+ readBufSize := config.ReadBufferSize
+ maxHeaderListSize := defaultServerMaxHeaderListSize
+ if config.MaxHeaderListSize != nil {
+ maxHeaderListSize = *config.MaxHeaderListSize
+ }
+ framer := newFramer(conn, writeBufSize, readBufSize, maxHeaderListSize)
+ // Send initial settings as connection preface to client.
+ isettings := []http2.Setting{{
+ ID: http2.SettingMaxFrameSize,
+ Val: http2MaxFrameLen,
+ }}
+ // TODO(zhaoq): Have a better way to signal "no limit" because 0 is
+ // permitted in the HTTP2 spec.
+ maxStreams := config.MaxStreams
+ if maxStreams == 0 {
+ maxStreams = math.MaxUint32
+ } else {
+ isettings = append(isettings, http2.Setting{
+ ID: http2.SettingMaxConcurrentStreams,
+ Val: maxStreams,
+ })
+ }
+ dynamicWindow := true
+ iwz := int32(initialWindowSize)
+ if config.InitialWindowSize >= defaultWindowSize {
+ iwz = config.InitialWindowSize
+ dynamicWindow = false
+ }
+ icwz := int32(initialWindowSize)
+ if config.InitialConnWindowSize >= defaultWindowSize {
+ icwz = config.InitialConnWindowSize
+ dynamicWindow = false
+ }
+ if iwz != defaultWindowSize {
+ isettings = append(isettings, http2.Setting{
+ ID: http2.SettingInitialWindowSize,
+ Val: uint32(iwz)})
+ }
+ if config.MaxHeaderListSize != nil {
+ isettings = append(isettings, http2.Setting{
+ ID: http2.SettingMaxHeaderListSize,
+ Val: *config.MaxHeaderListSize,
+ })
+ }
+ if config.HeaderTableSize != nil {
+ isettings = append(isettings, http2.Setting{
+ ID: http2.SettingHeaderTableSize,
+ Val: *config.HeaderTableSize,
+ })
+ }
+ if err := framer.fr.WriteSettings(isettings...); err != nil {
+ return nil, connectionErrorf(false, err, "transport: %v", err)
+ }
+ // Adjust the connection flow control window if needed.
+ if delta := uint32(icwz - defaultWindowSize); delta > 0 {
+ if err := framer.fr.WriteWindowUpdate(0, delta); err != nil {
+ return nil, connectionErrorf(false, err, "transport: %v", err)
+ }
+ }
+ kp := config.KeepaliveParams
+ if kp.MaxConnectionIdle == 0 {
+ kp.MaxConnectionIdle = defaultMaxConnectionIdle
+ }
+ if kp.MaxConnectionAge == 0 {
+ kp.MaxConnectionAge = defaultMaxConnectionAge
+ }
+ // Add a jitter to MaxConnectionAge.
+ kp.MaxConnectionAge += getJitter(kp.MaxConnectionAge)
+ if kp.MaxConnectionAgeGrace == 0 {
+ kp.MaxConnectionAgeGrace = defaultMaxConnectionAgeGrace
+ }
+ if kp.Time == 0 {
+ kp.Time = defaultServerKeepaliveTime
+ }
+ if kp.Timeout == 0 {
+ kp.Timeout = defaultServerKeepaliveTimeout
+ }
+ kep := config.KeepalivePolicy
+ if kep.MinTime == 0 {
+ kep.MinTime = defaultKeepalivePolicyMinTime
+ }
+ done := make(chan struct{})
+ t := &http2Server{
+ ctx: context.Background(),
+ done: done,
+ conn: conn,
+ remoteAddr: conn.RemoteAddr(),
+ localAddr: conn.LocalAddr(),
+ authInfo: config.AuthInfo,
+ framer: framer,
+ readerDone: make(chan struct{}),
+ writerDone: make(chan struct{}),
+ maxStreams: maxStreams,
+ inTapHandle: config.InTapHandle,
+ fc: &trInFlow{limit: uint32(icwz)},
+ state: reachable,
+ activeStreams: make(map[uint32]*Stream),
+ stats: config.StatsHandler,
+ kp: kp,
+ idle: time.Now(),
+ kep: kep,
+ initialWindowSize: iwz,
+ czData: new(channelzData),
+ bufferPool: newBufferPool(),
+ }
+ t.controlBuf = newControlBuffer(t.done)
+ if dynamicWindow {
+ t.bdpEst = &bdpEstimator{
+ bdp: initialWindowSize,
+ updateFlowControl: t.updateFlowControl,
+ }
+ }
+ if t.stats != nil {
+ t.ctx = t.stats.TagConn(t.ctx, &stats.ConnTagInfo{
+ RemoteAddr: t.remoteAddr,
+ LocalAddr: t.localAddr,
+ })
+ connBegin := &stats.ConnBegin{}
+ t.stats.HandleConn(t.ctx, connBegin)
+ }
+ if channelz.IsOn() {
+ t.channelzID = channelz.RegisterNormalSocket(t, config.ChannelzParentID, fmt.Sprintf("%s -> %s", t.remoteAddr, t.localAddr))
+ }
+ t.framer.writer.Flush()
+
+ defer func() {
+ if err != nil {
+ t.Close()
+ }
+ }()
+
+ // Check the validity of client preface.
+ preface := make([]byte, len(clientPreface))
+ if _, err := io.ReadFull(t.conn, preface); err != nil {
+ return nil, connectionErrorf(false, err, "transport: http2Server.HandleStreams failed to receive the preface from client: %v", err)
+ }
+ if !bytes.Equal(preface, clientPreface) {
+ return nil, connectionErrorf(false, nil, "transport: http2Server.HandleStreams received bogus greeting from client: %q", preface)
+ }
+
+ frame, err := t.framer.fr.ReadFrame()
+ if err == io.EOF || err == io.ErrUnexpectedEOF {
+ return nil, err
+ }
+ if err != nil {
+ return nil, connectionErrorf(false, err, "transport: http2Server.HandleStreams failed to read initial settings frame: %v", err)
+ }
+ atomic.StoreUint32(&t.activity, 1)
+ sf, ok := frame.(*http2.SettingsFrame)
+ if !ok {
+ return nil, connectionErrorf(false, nil, "transport: http2Server.HandleStreams saw invalid preface type %T from client", frame)
+ }
+ t.handleSettings(sf)
+
+ go func() {
+ t.loopy = newLoopyWriter(serverSide, t.framer, t.controlBuf, t.bdpEst)
+ t.loopy.ssGoAwayHandler = t.outgoingGoAwayHandler
+ if err := t.loopy.run(); err != nil {
+ errorf("transport: loopyWriter.run returning. Err: %v", err)
+ }
+ t.conn.Close()
+ close(t.writerDone)
+ }()
+ go t.keepalive()
+ return t, nil
+}
+
+// operateHeader takes action on the decoded headers.
+func (t *http2Server) operateHeaders(frame *http2.MetaHeadersFrame, handle func(*Stream), traceCtx func(context.Context, string) context.Context) (fatal bool) {
+ streamID := frame.Header().StreamID
+ state := &decodeState{
+ serverSide: true,
+ }
+ if err := state.decodeHeader(frame); err != nil {
+ if se, ok := status.FromError(err); ok {
+ t.controlBuf.put(&cleanupStream{
+ streamID: streamID,
+ rst: true,
+ rstCode: statusCodeConvTab[se.Code()],
+ onWrite: func() {},
+ })
+ }
+ return false
+ }
+
+ buf := newRecvBuffer()
+ s := &Stream{
+ id: streamID,
+ st: t,
+ buf: buf,
+ fc: &inFlow{limit: uint32(t.initialWindowSize)},
+ recvCompress: state.data.encoding,
+ method: state.data.method,
+ contentSubtype: state.data.contentSubtype,
+ }
+ if frame.StreamEnded() {
+ // s is just created by the caller. No lock needed.
+ s.state = streamReadDone
+ }
+ if state.data.timeoutSet {
+ s.ctx, s.cancel = context.WithTimeout(t.ctx, state.data.timeout)
+ } else {
+ s.ctx, s.cancel = context.WithCancel(t.ctx)
+ }
+ pr := &peer.Peer{
+ Addr: t.remoteAddr,
+ }
+ // Attach Auth info if there is any.
+ if t.authInfo != nil {
+ pr.AuthInfo = t.authInfo
+ }
+ s.ctx = peer.NewContext(s.ctx, pr)
+ // Attach the received metadata to the context.
+ if len(state.data.mdata) > 0 {
+ s.ctx = metadata.NewIncomingContext(s.ctx, state.data.mdata)
+ }
+ if state.data.statsTags != nil {
+ s.ctx = stats.SetIncomingTags(s.ctx, state.data.statsTags)
+ }
+ if state.data.statsTrace != nil {
+ s.ctx = stats.SetIncomingTrace(s.ctx, state.data.statsTrace)
+ }
+ if t.inTapHandle != nil {
+ var err error
+ info := &tap.Info{
+ FullMethodName: state.data.method,
+ }
+ s.ctx, err = t.inTapHandle(s.ctx, info)
+ if err != nil {
+ warningf("transport: http2Server.operateHeaders got an error from InTapHandle: %v", err)
+ t.controlBuf.put(&cleanupStream{
+ streamID: s.id,
+ rst: true,
+ rstCode: http2.ErrCodeRefusedStream,
+ onWrite: func() {},
+ })
+ s.cancel()
+ return false
+ }
+ }
+ t.mu.Lock()
+ if t.state != reachable {
+ t.mu.Unlock()
+ s.cancel()
+ return false
+ }
+ if uint32(len(t.activeStreams)) >= t.maxStreams {
+ t.mu.Unlock()
+ t.controlBuf.put(&cleanupStream{
+ streamID: streamID,
+ rst: true,
+ rstCode: http2.ErrCodeRefusedStream,
+ onWrite: func() {},
+ })
+ s.cancel()
+ return false
+ }
+ if streamID%2 != 1 || streamID <= t.maxStreamID {
+ t.mu.Unlock()
+ // illegal gRPC stream id.
+ errorf("transport: http2Server.HandleStreams received an illegal stream id: %v", streamID)
+ s.cancel()
+ return true
+ }
+ t.maxStreamID = streamID
+ t.activeStreams[streamID] = s
+ if len(t.activeStreams) == 1 {
+ t.idle = time.Time{}
+ }
+ t.mu.Unlock()
+ if channelz.IsOn() {
+ atomic.AddInt64(&t.czData.streamsStarted, 1)
+ atomic.StoreInt64(&t.czData.lastStreamCreatedTime, time.Now().UnixNano())
+ }
+ s.requestRead = func(n int) {
+ t.adjustWindow(s, uint32(n))
+ }
+ s.ctx = traceCtx(s.ctx, s.method)
+ if t.stats != nil {
+ s.ctx = t.stats.TagRPC(s.ctx, &stats.RPCTagInfo{FullMethodName: s.method})
+ inHeader := &stats.InHeader{
+ FullMethod: s.method,
+ RemoteAddr: t.remoteAddr,
+ LocalAddr: t.localAddr,
+ Compression: s.recvCompress,
+ WireLength: int(frame.Header().Length),
+ }
+ t.stats.HandleRPC(s.ctx, inHeader)
+ }
+ s.ctxDone = s.ctx.Done()
+ s.wq = newWriteQuota(defaultWriteQuota, s.ctxDone)
+ s.trReader = &transportReader{
+ reader: &recvBufferReader{
+ ctx: s.ctx,
+ ctxDone: s.ctxDone,
+ recv: s.buf,
+ freeBuffer: t.bufferPool.put,
+ },
+ windowHandler: func(n int) {
+ t.updateWindow(s, uint32(n))
+ },
+ }
+ // Register the stream with loopy.
+ t.controlBuf.put(®isterStream{
+ streamID: s.id,
+ wq: s.wq,
+ })
+ handle(s)
+ return false
+}
+
+// HandleStreams receives incoming streams using the given handler. This is
+// typically run in a separate goroutine.
+// traceCtx attaches trace to ctx and returns the new context.
+func (t *http2Server) HandleStreams(handle func(*Stream), traceCtx func(context.Context, string) context.Context) {
+ defer close(t.readerDone)
+ for {
+ t.controlBuf.throttle()
+ frame, err := t.framer.fr.ReadFrame()
+ atomic.StoreUint32(&t.activity, 1)
+ if err != nil {
+ if se, ok := err.(http2.StreamError); ok {
+ warningf("transport: http2Server.HandleStreams encountered http2.StreamError: %v", se)
+ t.mu.Lock()
+ s := t.activeStreams[se.StreamID]
+ t.mu.Unlock()
+ if s != nil {
+ t.closeStream(s, true, se.Code, false)
+ } else {
+ t.controlBuf.put(&cleanupStream{
+ streamID: se.StreamID,
+ rst: true,
+ rstCode: se.Code,
+ onWrite: func() {},
+ })
+ }
+ continue
+ }
+ if err == io.EOF || err == io.ErrUnexpectedEOF {
+ t.Close()
+ return
+ }
+ warningf("transport: http2Server.HandleStreams failed to read frame: %v", err)
+ t.Close()
+ return
+ }
+ switch frame := frame.(type) {
+ case *http2.MetaHeadersFrame:
+ if t.operateHeaders(frame, handle, traceCtx) {
+ t.Close()
+ break
+ }
+ case *http2.DataFrame:
+ t.handleData(frame)
+ case *http2.RSTStreamFrame:
+ t.handleRSTStream(frame)
+ case *http2.SettingsFrame:
+ t.handleSettings(frame)
+ case *http2.PingFrame:
+ t.handlePing(frame)
+ case *http2.WindowUpdateFrame:
+ t.handleWindowUpdate(frame)
+ case *http2.GoAwayFrame:
+ // TODO: Handle GoAway from the client appropriately.
+ default:
+ errorf("transport: http2Server.HandleStreams found unhandled frame type %v.", frame)
+ }
+ }
+}
+
+func (t *http2Server) getStream(f http2.Frame) (*Stream, bool) {
+ t.mu.Lock()
+ defer t.mu.Unlock()
+ if t.activeStreams == nil {
+ // The transport is closing.
+ return nil, false
+ }
+ s, ok := t.activeStreams[f.Header().StreamID]
+ if !ok {
+ // The stream is already done.
+ return nil, false
+ }
+ return s, true
+}
+
+// adjustWindow sends out extra window update over the initial window size
+// of stream if the application is requesting data larger in size than
+// the window.
+func (t *http2Server) adjustWindow(s *Stream, n uint32) {
+ if w := s.fc.maybeAdjust(n); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{streamID: s.id, increment: w})
+ }
+
+}
+
+// updateWindow adjusts the inbound quota for the stream and the transport.
+// Window updates will deliver to the controller for sending when
+// the cumulative quota exceeds the corresponding threshold.
+func (t *http2Server) updateWindow(s *Stream, n uint32) {
+ if w := s.fc.onRead(n); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{streamID: s.id,
+ increment: w,
+ })
+ }
+}
+
+// updateFlowControl updates the incoming flow control windows
+// for the transport and the stream based on the current bdp
+// estimation.
+func (t *http2Server) updateFlowControl(n uint32) {
+ t.mu.Lock()
+ for _, s := range t.activeStreams {
+ s.fc.newLimit(n)
+ }
+ t.initialWindowSize = int32(n)
+ t.mu.Unlock()
+ t.controlBuf.put(&outgoingWindowUpdate{
+ streamID: 0,
+ increment: t.fc.newLimit(n),
+ })
+ t.controlBuf.put(&outgoingSettings{
+ ss: []http2.Setting{
+ {
+ ID: http2.SettingInitialWindowSize,
+ Val: n,
+ },
+ },
+ })
+
+}
+
+func (t *http2Server) handleData(f *http2.DataFrame) {
+ size := f.Header().Length
+ var sendBDPPing bool
+ if t.bdpEst != nil {
+ sendBDPPing = t.bdpEst.add(size)
+ }
+ // Decouple connection's flow control from application's read.
+ // An update on connection's flow control should not depend on
+ // whether user application has read the data or not. Such a
+ // restriction is already imposed on the stream's flow control,
+ // and therefore the sender will be blocked anyways.
+ // Decoupling the connection flow control will prevent other
+ // active(fast) streams from starving in presence of slow or
+ // inactive streams.
+ if w := t.fc.onData(size); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{
+ streamID: 0,
+ increment: w,
+ })
+ }
+ if sendBDPPing {
+ // Avoid excessive ping detection (e.g. in an L7 proxy)
+ // by sending a window update prior to the BDP ping.
+ if w := t.fc.reset(); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{
+ streamID: 0,
+ increment: w,
+ })
+ }
+ t.controlBuf.put(bdpPing)
+ }
+ // Select the right stream to dispatch.
+ s, ok := t.getStream(f)
+ if !ok {
+ return
+ }
+ if size > 0 {
+ if err := s.fc.onData(size); err != nil {
+ t.closeStream(s, true, http2.ErrCodeFlowControl, false)
+ return
+ }
+ if f.Header().Flags.Has(http2.FlagDataPadded) {
+ if w := s.fc.onRead(size - uint32(len(f.Data()))); w > 0 {
+ t.controlBuf.put(&outgoingWindowUpdate{s.id, w})
+ }
+ }
+ // TODO(bradfitz, zhaoq): A copy is required here because there is no
+ // guarantee f.Data() is consumed before the arrival of next frame.
+ // Can this copy be eliminated?
+ if len(f.Data()) > 0 {
+ buffer := t.bufferPool.get()
+ buffer.Reset()
+ buffer.Write(f.Data())
+ s.write(recvMsg{buffer: buffer})
+ }
+ }
+ if f.Header().Flags.Has(http2.FlagDataEndStream) {
+ // Received the end of stream from the client.
+ s.compareAndSwapState(streamActive, streamReadDone)
+ s.write(recvMsg{err: io.EOF})
+ }
+}
+
+func (t *http2Server) handleRSTStream(f *http2.RSTStreamFrame) {
+ // If the stream is not deleted from the transport's active streams map, then do a regular close stream.
+ if s, ok := t.getStream(f); ok {
+ t.closeStream(s, false, 0, false)
+ return
+ }
+ // If the stream is already deleted from the active streams map, then put a cleanupStream item into controlbuf to delete the stream from loopy writer's established streams map.
+ t.controlBuf.put(&cleanupStream{
+ streamID: f.Header().StreamID,
+ rst: false,
+ rstCode: 0,
+ onWrite: func() {},
+ })
+}
+
+func (t *http2Server) handleSettings(f *http2.SettingsFrame) {
+ if f.IsAck() {
+ return
+ }
+ var ss []http2.Setting
+ var updateFuncs []func()
+ f.ForeachSetting(func(s http2.Setting) error {
+ switch s.ID {
+ case http2.SettingMaxHeaderListSize:
+ updateFuncs = append(updateFuncs, func() {
+ t.maxSendHeaderListSize = new(uint32)
+ *t.maxSendHeaderListSize = s.Val
+ })
+ default:
+ ss = append(ss, s)
+ }
+ return nil
+ })
+ t.controlBuf.executeAndPut(func(interface{}) bool {
+ for _, f := range updateFuncs {
+ f()
+ }
+ return true
+ }, &incomingSettings{
+ ss: ss,
+ })
+}
+
+const (
+ maxPingStrikes = 2
+ defaultPingTimeout = 2 * time.Hour
+)
+
+func (t *http2Server) handlePing(f *http2.PingFrame) {
+ if f.IsAck() {
+ if f.Data == goAwayPing.data && t.drainChan != nil {
+ close(t.drainChan)
+ return
+ }
+ // Maybe it's a BDP ping.
+ if t.bdpEst != nil {
+ t.bdpEst.calculate(f.Data)
+ }
+ return
+ }
+ pingAck := &ping{ack: true}
+ copy(pingAck.data[:], f.Data[:])
+ t.controlBuf.put(pingAck)
+
+ now := time.Now()
+ defer func() {
+ t.lastPingAt = now
+ }()
+ // A reset ping strikes means that we don't need to check for policy
+ // violation for this ping and the pingStrikes counter should be set
+ // to 0.
+ if atomic.CompareAndSwapUint32(&t.resetPingStrikes, 1, 0) {
+ t.pingStrikes = 0
+ return
+ }
+ t.mu.Lock()
+ ns := len(t.activeStreams)
+ t.mu.Unlock()
+ if ns < 1 && !t.kep.PermitWithoutStream {
+ // Keepalive shouldn't be active thus, this new ping should
+ // have come after at least defaultPingTimeout.
+ if t.lastPingAt.Add(defaultPingTimeout).After(now) {
+ t.pingStrikes++
+ }
+ } else {
+ // Check if keepalive policy is respected.
+ if t.lastPingAt.Add(t.kep.MinTime).After(now) {
+ t.pingStrikes++
+ }
+ }
+
+ if t.pingStrikes > maxPingStrikes {
+ // Send goaway and close the connection.
+ errorf("transport: Got too many pings from the client, closing the connection.")
+ t.controlBuf.put(&goAway{code: http2.ErrCodeEnhanceYourCalm, debugData: []byte("too_many_pings"), closeConn: true})
+ }
+}
+
+func (t *http2Server) handleWindowUpdate(f *http2.WindowUpdateFrame) {
+ t.controlBuf.put(&incomingWindowUpdate{
+ streamID: f.Header().StreamID,
+ increment: f.Increment,
+ })
+}
+
+func appendHeaderFieldsFromMD(headerFields []hpack.HeaderField, md metadata.MD) []hpack.HeaderField {
+ for k, vv := range md {
+ if isReservedHeader(k) {
+ // Clients don't tolerate reading restricted headers after some non restricted ones were sent.
+ continue
+ }
+ for _, v := range vv {
+ headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)})
+ }
+ }
+ return headerFields
+}
+
+func (t *http2Server) checkForHeaderListSize(it interface{}) bool {
+ if t.maxSendHeaderListSize == nil {
+ return true
+ }
+ hdrFrame := it.(*headerFrame)
+ var sz int64
+ for _, f := range hdrFrame.hf {
+ if sz += int64(f.Size()); sz > int64(*t.maxSendHeaderListSize) {
+ errorf("header list size to send violates the maximum size (%d bytes) set by client", *t.maxSendHeaderListSize)
+ return false
+ }
+ }
+ return true
+}
+
+// WriteHeader sends the header metadata md back to the client.
+func (t *http2Server) WriteHeader(s *Stream, md metadata.MD) error {
+ if s.updateHeaderSent() || s.getState() == streamDone {
+ return ErrIllegalHeaderWrite
+ }
+ s.hdrMu.Lock()
+ if md.Len() > 0 {
+ if s.header.Len() > 0 {
+ s.header = metadata.Join(s.header, md)
+ } else {
+ s.header = md
+ }
+ }
+ if err := t.writeHeaderLocked(s); err != nil {
+ s.hdrMu.Unlock()
+ return err
+ }
+ s.hdrMu.Unlock()
+ return nil
+}
+
+func (t *http2Server) setResetPingStrikes() {
+ atomic.StoreUint32(&t.resetPingStrikes, 1)
+}
+
+func (t *http2Server) writeHeaderLocked(s *Stream) error {
+ // TODO(mmukhi): Benchmark if the performance gets better if count the metadata and other header fields
+ // first and create a slice of that exact size.
+ headerFields := make([]hpack.HeaderField, 0, 2) // at least :status, content-type will be there if none else.
+ headerFields = append(headerFields, hpack.HeaderField{Name: ":status", Value: "200"})
+ headerFields = append(headerFields, hpack.HeaderField{Name: "content-type", Value: contentType(s.contentSubtype)})
+ if s.sendCompress != "" {
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-encoding", Value: s.sendCompress})
+ }
+ headerFields = appendHeaderFieldsFromMD(headerFields, s.header)
+ success, err := t.controlBuf.executeAndPut(t.checkForHeaderListSize, &headerFrame{
+ streamID: s.id,
+ hf: headerFields,
+ endStream: false,
+ onWrite: t.setResetPingStrikes,
+ })
+ if !success {
+ if err != nil {
+ return err
+ }
+ t.closeStream(s, true, http2.ErrCodeInternal, false)
+ return ErrHeaderListSizeLimitViolation
+ }
+ if t.stats != nil {
+ // Note: WireLength is not set in outHeader.
+ // TODO(mmukhi): Revisit this later, if needed.
+ outHeader := &stats.OutHeader{}
+ t.stats.HandleRPC(s.Context(), outHeader)
+ }
+ return nil
+}
+
+// WriteStatus sends stream status to the client and terminates the stream.
+// There is no further I/O operations being able to perform on this stream.
+// TODO(zhaoq): Now it indicates the end of entire stream. Revisit if early
+// OK is adopted.
+func (t *http2Server) WriteStatus(s *Stream, st *status.Status) error {
+ if s.getState() == streamDone {
+ return nil
+ }
+ s.hdrMu.Lock()
+ // TODO(mmukhi): Benchmark if the performance gets better if count the metadata and other header fields
+ // first and create a slice of that exact size.
+ headerFields := make([]hpack.HeaderField, 0, 2) // grpc-status and grpc-message will be there if none else.
+ if !s.updateHeaderSent() { // No headers have been sent.
+ if len(s.header) > 0 { // Send a separate header frame.
+ if err := t.writeHeaderLocked(s); err != nil {
+ s.hdrMu.Unlock()
+ return err
+ }
+ } else { // Send a trailer only response.
+ headerFields = append(headerFields, hpack.HeaderField{Name: ":status", Value: "200"})
+ headerFields = append(headerFields, hpack.HeaderField{Name: "content-type", Value: contentType(s.contentSubtype)})
+ }
+ }
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-status", Value: strconv.Itoa(int(st.Code()))})
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-message", Value: encodeGrpcMessage(st.Message())})
+
+ if p := statusRawProto(st); p != nil && len(p.Details) > 0 {
+ stBytes, err := proto.Marshal(p)
+ if err != nil {
+ // TODO: return error instead, when callers are able to handle it.
+ grpclog.Errorf("transport: failed to marshal rpc status: %v, error: %v", p, err)
+ } else {
+ headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-status-details-bin", Value: encodeBinHeader(stBytes)})
+ }
+ }
+
+ // Attach the trailer metadata.
+ headerFields = appendHeaderFieldsFromMD(headerFields, s.trailer)
+ trailingHeader := &headerFrame{
+ streamID: s.id,
+ hf: headerFields,
+ endStream: true,
+ onWrite: t.setResetPingStrikes,
+ }
+ s.hdrMu.Unlock()
+ success, err := t.controlBuf.execute(t.checkForHeaderListSize, trailingHeader)
+ if !success {
+ if err != nil {
+ return err
+ }
+ t.closeStream(s, true, http2.ErrCodeInternal, false)
+ return ErrHeaderListSizeLimitViolation
+ }
+ // Send a RST_STREAM after the trailers if the client has not already half-closed.
+ rst := s.getState() == streamActive
+ t.finishStream(s, rst, http2.ErrCodeNo, trailingHeader, true)
+ if t.stats != nil {
+ t.stats.HandleRPC(s.Context(), &stats.OutTrailer{})
+ }
+ return nil
+}
+
+// Write converts the data into HTTP2 data frame and sends it out. Non-nil error
+// is returns if it fails (e.g., framing error, transport error).
+func (t *http2Server) Write(s *Stream, hdr []byte, data []byte, opts *Options) error {
+ if !s.isHeaderSent() { // Headers haven't been written yet.
+ if err := t.WriteHeader(s, nil); err != nil {
+ if _, ok := err.(ConnectionError); ok {
+ return err
+ }
+ // TODO(mmukhi, dfawley): Make sure this is the right code to return.
+ return status.Errorf(codes.Internal, "transport: %v", err)
+ }
+ } else {
+ // Writing headers checks for this condition.
+ if s.getState() == streamDone {
+ // TODO(mmukhi, dfawley): Should the server write also return io.EOF?
+ s.cancel()
+ select {
+ case <-t.done:
+ return ErrConnClosing
+ default:
+ }
+ return ContextErr(s.ctx.Err())
+ }
+ }
+ // Add some data to header frame so that we can equally distribute bytes across frames.
+ emptyLen := http2MaxFrameLen - len(hdr)
+ if emptyLen > len(data) {
+ emptyLen = len(data)
+ }
+ hdr = append(hdr, data[:emptyLen]...)
+ data = data[emptyLen:]
+ df := &dataFrame{
+ streamID: s.id,
+ h: hdr,
+ d: data,
+ onEachWrite: t.setResetPingStrikes,
+ }
+ if err := s.wq.get(int32(len(hdr) + len(data))); err != nil {
+ select {
+ case <-t.done:
+ return ErrConnClosing
+ default:
+ }
+ return ContextErr(s.ctx.Err())
+ }
+ return t.controlBuf.put(df)
+}
+
+// keepalive running in a separate goroutine does the following:
+// 1. Gracefully closes an idle connection after a duration of keepalive.MaxConnectionIdle.
+// 2. Gracefully closes any connection after a duration of keepalive.MaxConnectionAge.
+// 3. Forcibly closes a connection after an additive period of keepalive.MaxConnectionAgeGrace over keepalive.MaxConnectionAge.
+// 4. Makes sure a connection is alive by sending pings with a frequency of keepalive.Time and closes a non-responsive connection
+// after an additional duration of keepalive.Timeout.
+func (t *http2Server) keepalive() {
+ p := &ping{}
+ var pingSent bool
+ maxIdle := time.NewTimer(t.kp.MaxConnectionIdle)
+ maxAge := time.NewTimer(t.kp.MaxConnectionAge)
+ keepalive := time.NewTimer(t.kp.Time)
+ // NOTE: All exit paths of this function should reset their
+ // respective timers. A failure to do so will cause the
+ // following clean-up to deadlock and eventually leak.
+ defer func() {
+ if !maxIdle.Stop() {
+ <-maxIdle.C
+ }
+ if !maxAge.Stop() {
+ <-maxAge.C
+ }
+ if !keepalive.Stop() {
+ <-keepalive.C
+ }
+ }()
+ for {
+ select {
+ case <-maxIdle.C:
+ t.mu.Lock()
+ idle := t.idle
+ if idle.IsZero() { // The connection is non-idle.
+ t.mu.Unlock()
+ maxIdle.Reset(t.kp.MaxConnectionIdle)
+ continue
+ }
+ val := t.kp.MaxConnectionIdle - time.Since(idle)
+ t.mu.Unlock()
+ if val <= 0 {
+ // The connection has been idle for a duration of keepalive.MaxConnectionIdle or more.
+ // Gracefully close the connection.
+ t.drain(http2.ErrCodeNo, []byte{})
+ // Resetting the timer so that the clean-up doesn't deadlock.
+ maxIdle.Reset(infinity)
+ return
+ }
+ maxIdle.Reset(val)
+ case <-maxAge.C:
+ t.drain(http2.ErrCodeNo, []byte{})
+ maxAge.Reset(t.kp.MaxConnectionAgeGrace)
+ select {
+ case <-maxAge.C:
+ // Close the connection after grace period.
+ infof("transport: closing server transport due to maximum connection age.")
+ t.Close()
+ // Resetting the timer so that the clean-up doesn't deadlock.
+ maxAge.Reset(infinity)
+ case <-t.done:
+ }
+ return
+ case <-keepalive.C:
+ if atomic.CompareAndSwapUint32(&t.activity, 1, 0) {
+ pingSent = false
+ keepalive.Reset(t.kp.Time)
+ continue
+ }
+ if pingSent {
+ infof("transport: closing server transport due to idleness.")
+ t.Close()
+ // Resetting the timer so that the clean-up doesn't deadlock.
+ keepalive.Reset(infinity)
+ return
+ }
+ pingSent = true
+ if channelz.IsOn() {
+ atomic.AddInt64(&t.czData.kpCount, 1)
+ }
+ t.controlBuf.put(p)
+ keepalive.Reset(t.kp.Timeout)
+ case <-t.done:
+ return
+ }
+ }
+}
+
+// Close starts shutting down the http2Server transport.
+// TODO(zhaoq): Now the destruction is not blocked on any pending streams. This
+// could cause some resource issue. Revisit this later.
+func (t *http2Server) Close() error {
+ t.mu.Lock()
+ if t.state == closing {
+ t.mu.Unlock()
+ return errors.New("transport: Close() was already called")
+ }
+ t.state = closing
+ streams := t.activeStreams
+ t.activeStreams = nil
+ t.mu.Unlock()
+ t.controlBuf.finish()
+ close(t.done)
+ err := t.conn.Close()
+ if channelz.IsOn() {
+ channelz.RemoveEntry(t.channelzID)
+ }
+ // Cancel all active streams.
+ for _, s := range streams {
+ s.cancel()
+ }
+ if t.stats != nil {
+ connEnd := &stats.ConnEnd{}
+ t.stats.HandleConn(t.ctx, connEnd)
+ }
+ return err
+}
+
+// deleteStream deletes the stream s from transport's active streams.
+func (t *http2Server) deleteStream(s *Stream, eosReceived bool) {
+ // In case stream sending and receiving are invoked in separate
+ // goroutines (e.g., bi-directional streaming), cancel needs to be
+ // called to interrupt the potential blocking on other goroutines.
+ s.cancel()
+
+ t.mu.Lock()
+ if _, ok := t.activeStreams[s.id]; ok {
+ delete(t.activeStreams, s.id)
+ if len(t.activeStreams) == 0 {
+ t.idle = time.Now()
+ }
+ }
+ t.mu.Unlock()
+
+ if channelz.IsOn() {
+ if eosReceived {
+ atomic.AddInt64(&t.czData.streamsSucceeded, 1)
+ } else {
+ atomic.AddInt64(&t.czData.streamsFailed, 1)
+ }
+ }
+}
+
+// finishStream closes the stream and puts the trailing headerFrame into controlbuf.
+func (t *http2Server) finishStream(s *Stream, rst bool, rstCode http2.ErrCode, hdr *headerFrame, eosReceived bool) {
+ oldState := s.swapState(streamDone)
+ if oldState == streamDone {
+ // If the stream was already done, return.
+ return
+ }
+
+ hdr.cleanup = &cleanupStream{
+ streamID: s.id,
+ rst: rst,
+ rstCode: rstCode,
+ onWrite: func() {
+ t.deleteStream(s, eosReceived)
+ },
+ }
+ t.controlBuf.put(hdr)
+}
+
+// closeStream clears the footprint of a stream when the stream is not needed any more.
+func (t *http2Server) closeStream(s *Stream, rst bool, rstCode http2.ErrCode, eosReceived bool) {
+ s.swapState(streamDone)
+ t.deleteStream(s, eosReceived)
+
+ t.controlBuf.put(&cleanupStream{
+ streamID: s.id,
+ rst: rst,
+ rstCode: rstCode,
+ onWrite: func() {},
+ })
+}
+
+func (t *http2Server) RemoteAddr() net.Addr {
+ return t.remoteAddr
+}
+
+func (t *http2Server) Drain() {
+ t.drain(http2.ErrCodeNo, []byte{})
+}
+
+func (t *http2Server) drain(code http2.ErrCode, debugData []byte) {
+ t.mu.Lock()
+ defer t.mu.Unlock()
+ if t.drainChan != nil {
+ return
+ }
+ t.drainChan = make(chan struct{})
+ t.controlBuf.put(&goAway{code: code, debugData: debugData, headsUp: true})
+}
+
+var goAwayPing = &ping{data: [8]byte{1, 6, 1, 8, 0, 3, 3, 9}}
+
+// Handles outgoing GoAway and returns true if loopy needs to put itself
+// in draining mode.
+func (t *http2Server) outgoingGoAwayHandler(g *goAway) (bool, error) {
+ t.mu.Lock()
+ if t.state == closing { // TODO(mmukhi): This seems unnecessary.
+ t.mu.Unlock()
+ // The transport is closing.
+ return false, ErrConnClosing
+ }
+ sid := t.maxStreamID
+ if !g.headsUp {
+ // Stop accepting more streams now.
+ t.state = draining
+ if len(t.activeStreams) == 0 {
+ g.closeConn = true
+ }
+ t.mu.Unlock()
+ if err := t.framer.fr.WriteGoAway(sid, g.code, g.debugData); err != nil {
+ return false, err
+ }
+ if g.closeConn {
+ // Abruptly close the connection following the GoAway (via
+ // loopywriter). But flush out what's inside the buffer first.
+ t.framer.writer.Flush()
+ return false, fmt.Errorf("transport: Connection closing")
+ }
+ return true, nil
+ }
+ t.mu.Unlock()
+ // For a graceful close, send out a GoAway with stream ID of MaxUInt32,
+ // Follow that with a ping and wait for the ack to come back or a timer
+ // to expire. During this time accept new streams since they might have
+ // originated before the GoAway reaches the client.
+ // After getting the ack or timer expiration send out another GoAway this
+ // time with an ID of the max stream server intends to process.
+ if err := t.framer.fr.WriteGoAway(math.MaxUint32, http2.ErrCodeNo, []byte{}); err != nil {
+ return false, err
+ }
+ if err := t.framer.fr.WritePing(false, goAwayPing.data); err != nil {
+ return false, err
+ }
+ go func() {
+ timer := time.NewTimer(time.Minute)
+ defer timer.Stop()
+ select {
+ case <-t.drainChan:
+ case <-timer.C:
+ case <-t.done:
+ return
+ }
+ t.controlBuf.put(&goAway{code: g.code, debugData: g.debugData})
+ }()
+ return false, nil
+}
+
+func (t *http2Server) ChannelzMetric() *channelz.SocketInternalMetric {
+ s := channelz.SocketInternalMetric{
+ StreamsStarted: atomic.LoadInt64(&t.czData.streamsStarted),
+ StreamsSucceeded: atomic.LoadInt64(&t.czData.streamsSucceeded),
+ StreamsFailed: atomic.LoadInt64(&t.czData.streamsFailed),
+ MessagesSent: atomic.LoadInt64(&t.czData.msgSent),
+ MessagesReceived: atomic.LoadInt64(&t.czData.msgRecv),
+ KeepAlivesSent: atomic.LoadInt64(&t.czData.kpCount),
+ LastRemoteStreamCreatedTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastStreamCreatedTime)),
+ LastMessageSentTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastMsgSentTime)),
+ LastMessageReceivedTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastMsgRecvTime)),
+ LocalFlowControlWindow: int64(t.fc.getSize()),
+ SocketOptions: channelz.GetSocketOption(t.conn),
+ LocalAddr: t.localAddr,
+ RemoteAddr: t.remoteAddr,
+ // RemoteName :
+ }
+ if au, ok := t.authInfo.(credentials.ChannelzSecurityInfo); ok {
+ s.Security = au.GetSecurityValue()
+ }
+ s.RemoteFlowControlWindow = t.getOutFlowWindow()
+ return &s
+}
+
+func (t *http2Server) IncrMsgSent() {
+ atomic.AddInt64(&t.czData.msgSent, 1)
+ atomic.StoreInt64(&t.czData.lastMsgSentTime, time.Now().UnixNano())
+}
+
+func (t *http2Server) IncrMsgRecv() {
+ atomic.AddInt64(&t.czData.msgRecv, 1)
+ atomic.StoreInt64(&t.czData.lastMsgRecvTime, time.Now().UnixNano())
+}
+
+func (t *http2Server) getOutFlowWindow() int64 {
+ resp := make(chan uint32, 1)
+ timer := time.NewTimer(time.Second)
+ defer timer.Stop()
+ t.controlBuf.put(&outFlowControlSizeRequest{resp})
+ select {
+ case sz := <-resp:
+ return int64(sz)
+ case <-t.done:
+ return -1
+ case <-timer.C:
+ return -2
+ }
+}
+
+func getJitter(v time.Duration) time.Duration {
+ if v == infinity {
+ return 0
+ }
+ // Generate a jitter between +/- 10% of the value.
+ r := int64(v / 10)
+ j := grpcrand.Int63n(2*r) - r
+ return time.Duration(j)
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/http_util.go b/vendor/google.golang.org/grpc/internal/transport/http_util.go
new file mode 100644
index 0000000..8f5f334
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/http_util.go
@@ -0,0 +1,677 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+ "bufio"
+ "bytes"
+ "encoding/base64"
+ "fmt"
+ "io"
+ "math"
+ "net"
+ "net/http"
+ "strconv"
+ "strings"
+ "time"
+ "unicode/utf8"
+
+ "github.com/golang/protobuf/proto"
+ "golang.org/x/net/http2"
+ "golang.org/x/net/http2/hpack"
+ spb "google.golang.org/genproto/googleapis/rpc/status"
+ "google.golang.org/grpc/codes"
+ "google.golang.org/grpc/status"
+)
+
+const (
+ // http2MaxFrameLen specifies the max length of a HTTP2 frame.
+ http2MaxFrameLen = 16384 // 16KB frame
+ // http://http2.github.io/http2-spec/#SettingValues
+ http2InitHeaderTableSize = 4096
+ // baseContentType is the base content-type for gRPC. This is a valid
+ // content-type on it's own, but can also include a content-subtype such as
+ // "proto" as a suffix after "+" or ";". See
+ // https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests
+ // for more details.
+ baseContentType = "application/grpc"
+)
+
+var (
+ clientPreface = []byte(http2.ClientPreface)
+ http2ErrConvTab = map[http2.ErrCode]codes.Code{
+ http2.ErrCodeNo: codes.Internal,
+ http2.ErrCodeProtocol: codes.Internal,
+ http2.ErrCodeInternal: codes.Internal,
+ http2.ErrCodeFlowControl: codes.ResourceExhausted,
+ http2.ErrCodeSettingsTimeout: codes.Internal,
+ http2.ErrCodeStreamClosed: codes.Internal,
+ http2.ErrCodeFrameSize: codes.Internal,
+ http2.ErrCodeRefusedStream: codes.Unavailable,
+ http2.ErrCodeCancel: codes.Canceled,
+ http2.ErrCodeCompression: codes.Internal,
+ http2.ErrCodeConnect: codes.Internal,
+ http2.ErrCodeEnhanceYourCalm: codes.ResourceExhausted,
+ http2.ErrCodeInadequateSecurity: codes.PermissionDenied,
+ http2.ErrCodeHTTP11Required: codes.Internal,
+ }
+ statusCodeConvTab = map[codes.Code]http2.ErrCode{
+ codes.Internal: http2.ErrCodeInternal,
+ codes.Canceled: http2.ErrCodeCancel,
+ codes.Unavailable: http2.ErrCodeRefusedStream,
+ codes.ResourceExhausted: http2.ErrCodeEnhanceYourCalm,
+ codes.PermissionDenied: http2.ErrCodeInadequateSecurity,
+ }
+ // HTTPStatusConvTab is the HTTP status code to gRPC error code conversion table.
+ HTTPStatusConvTab = map[int]codes.Code{
+ // 400 Bad Request - INTERNAL.
+ http.StatusBadRequest: codes.Internal,
+ // 401 Unauthorized - UNAUTHENTICATED.
+ http.StatusUnauthorized: codes.Unauthenticated,
+ // 403 Forbidden - PERMISSION_DENIED.
+ http.StatusForbidden: codes.PermissionDenied,
+ // 404 Not Found - UNIMPLEMENTED.
+ http.StatusNotFound: codes.Unimplemented,
+ // 429 Too Many Requests - UNAVAILABLE.
+ http.StatusTooManyRequests: codes.Unavailable,
+ // 502 Bad Gateway - UNAVAILABLE.
+ http.StatusBadGateway: codes.Unavailable,
+ // 503 Service Unavailable - UNAVAILABLE.
+ http.StatusServiceUnavailable: codes.Unavailable,
+ // 504 Gateway timeout - UNAVAILABLE.
+ http.StatusGatewayTimeout: codes.Unavailable,
+ }
+)
+
+type parsedHeaderData struct {
+ encoding string
+ // statusGen caches the stream status received from the trailer the server
+ // sent. Client side only. Do not access directly. After all trailers are
+ // parsed, use the status method to retrieve the status.
+ statusGen *status.Status
+ // rawStatusCode and rawStatusMsg are set from the raw trailer fields and are not
+ // intended for direct access outside of parsing.
+ rawStatusCode *int
+ rawStatusMsg string
+ httpStatus *int
+ // Server side only fields.
+ timeoutSet bool
+ timeout time.Duration
+ method string
+ // key-value metadata map from the peer.
+ mdata map[string][]string
+ statsTags []byte
+ statsTrace []byte
+ contentSubtype string
+
+ // isGRPC field indicates whether the peer is speaking gRPC (otherwise HTTP).
+ //
+ // We are in gRPC mode (peer speaking gRPC) if:
+ // * We are client side and have already received a HEADER frame that indicates gRPC peer.
+ // * The header contains valid a content-type, i.e. a string starts with "application/grpc"
+ // And we should handle error specific to gRPC.
+ //
+ // Otherwise (i.e. a content-type string starts without "application/grpc", or does not exist), we
+ // are in HTTP fallback mode, and should handle error specific to HTTP.
+ isGRPC bool
+ grpcErr error
+ httpErr error
+ contentTypeErr string
+}
+
+// decodeState configures decoding criteria and records the decoded data.
+type decodeState struct {
+ // whether decoding on server side or not
+ serverSide bool
+
+ // Records the states during HPACK decoding. It will be filled with info parsed from HTTP HEADERS
+ // frame once decodeHeader function has been invoked and returned.
+ data parsedHeaderData
+}
+
+// isReservedHeader checks whether hdr belongs to HTTP2 headers
+// reserved by gRPC protocol. Any other headers are classified as the
+// user-specified metadata.
+func isReservedHeader(hdr string) bool {
+ if hdr != "" && hdr[0] == ':' {
+ return true
+ }
+ switch hdr {
+ case "content-type",
+ "user-agent",
+ "grpc-message-type",
+ "grpc-encoding",
+ "grpc-message",
+ "grpc-status",
+ "grpc-timeout",
+ "grpc-status-details-bin",
+ // Intentionally exclude grpc-previous-rpc-attempts and
+ // grpc-retry-pushback-ms, which are "reserved", but their API
+ // intentionally works via metadata.
+ "te":
+ return true
+ default:
+ return false
+ }
+}
+
+// isWhitelistedHeader checks whether hdr should be propagated into metadata
+// visible to users, even though it is classified as "reserved", above.
+func isWhitelistedHeader(hdr string) bool {
+ switch hdr {
+ case ":authority", "user-agent":
+ return true
+ default:
+ return false
+ }
+}
+
+// contentSubtype returns the content-subtype for the given content-type. The
+// given content-type must be a valid content-type that starts with
+// "application/grpc". A content-subtype will follow "application/grpc" after a
+// "+" or ";". See
+// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for
+// more details.
+//
+// If contentType is not a valid content-type for gRPC, the boolean
+// will be false, otherwise true. If content-type == "application/grpc",
+// "application/grpc+", or "application/grpc;", the boolean will be true,
+// but no content-subtype will be returned.
+//
+// contentType is assumed to be lowercase already.
+func contentSubtype(contentType string) (string, bool) {
+ if contentType == baseContentType {
+ return "", true
+ }
+ if !strings.HasPrefix(contentType, baseContentType) {
+ return "", false
+ }
+ // guaranteed since != baseContentType and has baseContentType prefix
+ switch contentType[len(baseContentType)] {
+ case '+', ';':
+ // this will return true for "application/grpc+" or "application/grpc;"
+ // which the previous validContentType function tested to be valid, so we
+ // just say that no content-subtype is specified in this case
+ return contentType[len(baseContentType)+1:], true
+ default:
+ return "", false
+ }
+}
+
+// contentSubtype is assumed to be lowercase
+func contentType(contentSubtype string) string {
+ if contentSubtype == "" {
+ return baseContentType
+ }
+ return baseContentType + "+" + contentSubtype
+}
+
+func (d *decodeState) status() *status.Status {
+ if d.data.statusGen == nil {
+ // No status-details were provided; generate status using code/msg.
+ d.data.statusGen = status.New(codes.Code(int32(*(d.data.rawStatusCode))), d.data.rawStatusMsg)
+ }
+ return d.data.statusGen
+}
+
+const binHdrSuffix = "-bin"
+
+func encodeBinHeader(v []byte) string {
+ return base64.RawStdEncoding.EncodeToString(v)
+}
+
+func decodeBinHeader(v string) ([]byte, error) {
+ if len(v)%4 == 0 {
+ // Input was padded, or padding was not necessary.
+ return base64.StdEncoding.DecodeString(v)
+ }
+ return base64.RawStdEncoding.DecodeString(v)
+}
+
+func encodeMetadataHeader(k, v string) string {
+ if strings.HasSuffix(k, binHdrSuffix) {
+ return encodeBinHeader(([]byte)(v))
+ }
+ return v
+}
+
+func decodeMetadataHeader(k, v string) (string, error) {
+ if strings.HasSuffix(k, binHdrSuffix) {
+ b, err := decodeBinHeader(v)
+ return string(b), err
+ }
+ return v, nil
+}
+
+func (d *decodeState) decodeHeader(frame *http2.MetaHeadersFrame) error {
+ // frame.Truncated is set to true when framer detects that the current header
+ // list size hits MaxHeaderListSize limit.
+ if frame.Truncated {
+ return status.Error(codes.Internal, "peer header list size exceeded limit")
+ }
+
+ for _, hf := range frame.Fields {
+ d.processHeaderField(hf)
+ }
+
+ if d.data.isGRPC {
+ if d.data.grpcErr != nil {
+ return d.data.grpcErr
+ }
+ if d.serverSide {
+ return nil
+ }
+ if d.data.rawStatusCode == nil && d.data.statusGen == nil {
+ // gRPC status doesn't exist.
+ // Set rawStatusCode to be unknown and return nil error.
+ // So that, if the stream has ended this Unknown status
+ // will be propagated to the user.
+ // Otherwise, it will be ignored. In which case, status from
+ // a later trailer, that has StreamEnded flag set, is propagated.
+ code := int(codes.Unknown)
+ d.data.rawStatusCode = &code
+ }
+ return nil
+ }
+
+ // HTTP fallback mode
+ if d.data.httpErr != nil {
+ return d.data.httpErr
+ }
+
+ var (
+ code = codes.Internal // when header does not include HTTP status, return INTERNAL
+ ok bool
+ )
+
+ if d.data.httpStatus != nil {
+ code, ok = HTTPStatusConvTab[*(d.data.httpStatus)]
+ if !ok {
+ code = codes.Unknown
+ }
+ }
+
+ return status.Error(code, d.constructHTTPErrMsg())
+}
+
+// constructErrMsg constructs error message to be returned in HTTP fallback mode.
+// Format: HTTP status code and its corresponding message + content-type error message.
+func (d *decodeState) constructHTTPErrMsg() string {
+ var errMsgs []string
+
+ if d.data.httpStatus == nil {
+ errMsgs = append(errMsgs, "malformed header: missing HTTP status")
+ } else {
+ errMsgs = append(errMsgs, fmt.Sprintf("%s: HTTP status code %d", http.StatusText(*(d.data.httpStatus)), *d.data.httpStatus))
+ }
+
+ if d.data.contentTypeErr == "" {
+ errMsgs = append(errMsgs, "transport: missing content-type field")
+ } else {
+ errMsgs = append(errMsgs, d.data.contentTypeErr)
+ }
+
+ return strings.Join(errMsgs, "; ")
+}
+
+func (d *decodeState) addMetadata(k, v string) {
+ if d.data.mdata == nil {
+ d.data.mdata = make(map[string][]string)
+ }
+ d.data.mdata[k] = append(d.data.mdata[k], v)
+}
+
+func (d *decodeState) processHeaderField(f hpack.HeaderField) {
+ switch f.Name {
+ case "content-type":
+ contentSubtype, validContentType := contentSubtype(f.Value)
+ if !validContentType {
+ d.data.contentTypeErr = fmt.Sprintf("transport: received the unexpected content-type %q", f.Value)
+ return
+ }
+ d.data.contentSubtype = contentSubtype
+ // TODO: do we want to propagate the whole content-type in the metadata,
+ // or come up with a way to just propagate the content-subtype if it was set?
+ // ie {"content-type": "application/grpc+proto"} or {"content-subtype": "proto"}
+ // in the metadata?
+ d.addMetadata(f.Name, f.Value)
+ d.data.isGRPC = true
+ case "grpc-encoding":
+ d.data.encoding = f.Value
+ case "grpc-status":
+ code, err := strconv.Atoi(f.Value)
+ if err != nil {
+ d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-status: %v", err)
+ return
+ }
+ d.data.rawStatusCode = &code
+ case "grpc-message":
+ d.data.rawStatusMsg = decodeGrpcMessage(f.Value)
+ case "grpc-status-details-bin":
+ v, err := decodeBinHeader(f.Value)
+ if err != nil {
+ d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-status-details-bin: %v", err)
+ return
+ }
+ s := &spb.Status{}
+ if err := proto.Unmarshal(v, s); err != nil {
+ d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-status-details-bin: %v", err)
+ return
+ }
+ d.data.statusGen = status.FromProto(s)
+ case "grpc-timeout":
+ d.data.timeoutSet = true
+ var err error
+ if d.data.timeout, err = decodeTimeout(f.Value); err != nil {
+ d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed time-out: %v", err)
+ }
+ case ":path":
+ d.data.method = f.Value
+ case ":status":
+ code, err := strconv.Atoi(f.Value)
+ if err != nil {
+ d.data.httpErr = status.Errorf(codes.Internal, "transport: malformed http-status: %v", err)
+ return
+ }
+ d.data.httpStatus = &code
+ case "grpc-tags-bin":
+ v, err := decodeBinHeader(f.Value)
+ if err != nil {
+ d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-tags-bin: %v", err)
+ return
+ }
+ d.data.statsTags = v
+ d.addMetadata(f.Name, string(v))
+ case "grpc-trace-bin":
+ v, err := decodeBinHeader(f.Value)
+ if err != nil {
+ d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-trace-bin: %v", err)
+ return
+ }
+ d.data.statsTrace = v
+ d.addMetadata(f.Name, string(v))
+ default:
+ if isReservedHeader(f.Name) && !isWhitelistedHeader(f.Name) {
+ break
+ }
+ v, err := decodeMetadataHeader(f.Name, f.Value)
+ if err != nil {
+ errorf("Failed to decode metadata header (%q, %q): %v", f.Name, f.Value, err)
+ return
+ }
+ d.addMetadata(f.Name, v)
+ }
+}
+
+type timeoutUnit uint8
+
+const (
+ hour timeoutUnit = 'H'
+ minute timeoutUnit = 'M'
+ second timeoutUnit = 'S'
+ millisecond timeoutUnit = 'm'
+ microsecond timeoutUnit = 'u'
+ nanosecond timeoutUnit = 'n'
+)
+
+func timeoutUnitToDuration(u timeoutUnit) (d time.Duration, ok bool) {
+ switch u {
+ case hour:
+ return time.Hour, true
+ case minute:
+ return time.Minute, true
+ case second:
+ return time.Second, true
+ case millisecond:
+ return time.Millisecond, true
+ case microsecond:
+ return time.Microsecond, true
+ case nanosecond:
+ return time.Nanosecond, true
+ default:
+ }
+ return
+}
+
+const maxTimeoutValue int64 = 100000000 - 1
+
+// div does integer division and round-up the result. Note that this is
+// equivalent to (d+r-1)/r but has less chance to overflow.
+func div(d, r time.Duration) int64 {
+ if m := d % r; m > 0 {
+ return int64(d/r + 1)
+ }
+ return int64(d / r)
+}
+
+// TODO(zhaoq): It is the simplistic and not bandwidth efficient. Improve it.
+func encodeTimeout(t time.Duration) string {
+ if t <= 0 {
+ return "0n"
+ }
+ if d := div(t, time.Nanosecond); d <= maxTimeoutValue {
+ return strconv.FormatInt(d, 10) + "n"
+ }
+ if d := div(t, time.Microsecond); d <= maxTimeoutValue {
+ return strconv.FormatInt(d, 10) + "u"
+ }
+ if d := div(t, time.Millisecond); d <= maxTimeoutValue {
+ return strconv.FormatInt(d, 10) + "m"
+ }
+ if d := div(t, time.Second); d <= maxTimeoutValue {
+ return strconv.FormatInt(d, 10) + "S"
+ }
+ if d := div(t, time.Minute); d <= maxTimeoutValue {
+ return strconv.FormatInt(d, 10) + "M"
+ }
+ // Note that maxTimeoutValue * time.Hour > MaxInt64.
+ return strconv.FormatInt(div(t, time.Hour), 10) + "H"
+}
+
+func decodeTimeout(s string) (time.Duration, error) {
+ size := len(s)
+ if size < 2 {
+ return 0, fmt.Errorf("transport: timeout string is too short: %q", s)
+ }
+ if size > 9 {
+ // Spec allows for 8 digits plus the unit.
+ return 0, fmt.Errorf("transport: timeout string is too long: %q", s)
+ }
+ unit := timeoutUnit(s[size-1])
+ d, ok := timeoutUnitToDuration(unit)
+ if !ok {
+ return 0, fmt.Errorf("transport: timeout unit is not recognized: %q", s)
+ }
+ t, err := strconv.ParseInt(s[:size-1], 10, 64)
+ if err != nil {
+ return 0, err
+ }
+ const maxHours = math.MaxInt64 / int64(time.Hour)
+ if d == time.Hour && t > maxHours {
+ // This timeout would overflow math.MaxInt64; clamp it.
+ return time.Duration(math.MaxInt64), nil
+ }
+ return d * time.Duration(t), nil
+}
+
+const (
+ spaceByte = ' '
+ tildeByte = '~'
+ percentByte = '%'
+)
+
+// encodeGrpcMessage is used to encode status code in header field
+// "grpc-message". It does percent encoding and also replaces invalid utf-8
+// characters with Unicode replacement character.
+//
+// It checks to see if each individual byte in msg is an allowable byte, and
+// then either percent encoding or passing it through. When percent encoding,
+// the byte is converted into hexadecimal notation with a '%' prepended.
+func encodeGrpcMessage(msg string) string {
+ if msg == "" {
+ return ""
+ }
+ lenMsg := len(msg)
+ for i := 0; i < lenMsg; i++ {
+ c := msg[i]
+ if !(c >= spaceByte && c <= tildeByte && c != percentByte) {
+ return encodeGrpcMessageUnchecked(msg)
+ }
+ }
+ return msg
+}
+
+func encodeGrpcMessageUnchecked(msg string) string {
+ var buf bytes.Buffer
+ for len(msg) > 0 {
+ r, size := utf8.DecodeRuneInString(msg)
+ for _, b := range []byte(string(r)) {
+ if size > 1 {
+ // If size > 1, r is not ascii. Always do percent encoding.
+ buf.WriteString(fmt.Sprintf("%%%02X", b))
+ continue
+ }
+
+ // The for loop is necessary even if size == 1. r could be
+ // utf8.RuneError.
+ //
+ // fmt.Sprintf("%%%02X", utf8.RuneError) gives "%FFFD".
+ if b >= spaceByte && b <= tildeByte && b != percentByte {
+ buf.WriteByte(b)
+ } else {
+ buf.WriteString(fmt.Sprintf("%%%02X", b))
+ }
+ }
+ msg = msg[size:]
+ }
+ return buf.String()
+}
+
+// decodeGrpcMessage decodes the msg encoded by encodeGrpcMessage.
+func decodeGrpcMessage(msg string) string {
+ if msg == "" {
+ return ""
+ }
+ lenMsg := len(msg)
+ for i := 0; i < lenMsg; i++ {
+ if msg[i] == percentByte && i+2 < lenMsg {
+ return decodeGrpcMessageUnchecked(msg)
+ }
+ }
+ return msg
+}
+
+func decodeGrpcMessageUnchecked(msg string) string {
+ var buf bytes.Buffer
+ lenMsg := len(msg)
+ for i := 0; i < lenMsg; i++ {
+ c := msg[i]
+ if c == percentByte && i+2 < lenMsg {
+ parsed, err := strconv.ParseUint(msg[i+1:i+3], 16, 8)
+ if err != nil {
+ buf.WriteByte(c)
+ } else {
+ buf.WriteByte(byte(parsed))
+ i += 2
+ }
+ } else {
+ buf.WriteByte(c)
+ }
+ }
+ return buf.String()
+}
+
+type bufWriter struct {
+ buf []byte
+ offset int
+ batchSize int
+ conn net.Conn
+ err error
+
+ onFlush func()
+}
+
+func newBufWriter(conn net.Conn, batchSize int) *bufWriter {
+ return &bufWriter{
+ buf: make([]byte, batchSize*2),
+ batchSize: batchSize,
+ conn: conn,
+ }
+}
+
+func (w *bufWriter) Write(b []byte) (n int, err error) {
+ if w.err != nil {
+ return 0, w.err
+ }
+ if w.batchSize == 0 { // Buffer has been disabled.
+ return w.conn.Write(b)
+ }
+ for len(b) > 0 {
+ nn := copy(w.buf[w.offset:], b)
+ b = b[nn:]
+ w.offset += nn
+ n += nn
+ if w.offset >= w.batchSize {
+ err = w.Flush()
+ }
+ }
+ return n, err
+}
+
+func (w *bufWriter) Flush() error {
+ if w.err != nil {
+ return w.err
+ }
+ if w.offset == 0 {
+ return nil
+ }
+ if w.onFlush != nil {
+ w.onFlush()
+ }
+ _, w.err = w.conn.Write(w.buf[:w.offset])
+ w.offset = 0
+ return w.err
+}
+
+type framer struct {
+ writer *bufWriter
+ fr *http2.Framer
+}
+
+func newFramer(conn net.Conn, writeBufferSize, readBufferSize int, maxHeaderListSize uint32) *framer {
+ if writeBufferSize < 0 {
+ writeBufferSize = 0
+ }
+ var r io.Reader = conn
+ if readBufferSize > 0 {
+ r = bufio.NewReaderSize(r, readBufferSize)
+ }
+ w := newBufWriter(conn, writeBufferSize)
+ f := &framer{
+ writer: w,
+ fr: http2.NewFramer(w, r),
+ }
+ f.fr.SetMaxReadFrameSize(http2MaxFrameLen)
+ // Opt-in to Frame reuse API on framer to reduce garbage.
+ // Frames aren't safe to read from after a subsequent call to ReadFrame.
+ f.fr.SetReuseFrames()
+ f.fr.MaxHeaderListSize = maxHeaderListSize
+ f.fr.ReadMetaHeaders = hpack.NewDecoder(http2InitHeaderTableSize, nil)
+ return f
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/log.go b/vendor/google.golang.org/grpc/internal/transport/log.go
new file mode 100644
index 0000000..879df80
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/log.go
@@ -0,0 +1,44 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// This file contains wrappers for grpclog functions.
+// The transport package only logs to verbose level 2 by default.
+
+package transport
+
+import "google.golang.org/grpc/grpclog"
+
+const logLevel = 2
+
+func infof(format string, args ...interface{}) {
+ if grpclog.V(logLevel) {
+ grpclog.Infof(format, args...)
+ }
+}
+
+func warningf(format string, args ...interface{}) {
+ if grpclog.V(logLevel) {
+ grpclog.Warningf(format, args...)
+ }
+}
+
+func errorf(format string, args ...interface{}) {
+ if grpclog.V(logLevel) {
+ grpclog.Errorf(format, args...)
+ }
+}
diff --git a/vendor/google.golang.org/grpc/internal/transport/transport.go b/vendor/google.golang.org/grpc/internal/transport/transport.go
new file mode 100644
index 0000000..bfab940
--- /dev/null
+++ b/vendor/google.golang.org/grpc/internal/transport/transport.go
@@ -0,0 +1,807 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package transport defines and implements message oriented communication
+// channel to complete various transactions (e.g., an RPC). It is meant for
+// grpc-internal usage and is not intended to be imported directly by users.
+package transport
+
+import (
+ "bytes"
+ "context"
+ "errors"
+ "fmt"
+ "io"
+ "net"
+ "sync"
+ "sync/atomic"
+
+ "google.golang.org/grpc/codes"
+ "google.golang.org/grpc/credentials"
+ "google.golang.org/grpc/keepalive"
+ "google.golang.org/grpc/metadata"
+ "google.golang.org/grpc/stats"
+ "google.golang.org/grpc/status"
+ "google.golang.org/grpc/tap"
+)
+
+type bufferPool struct {
+ pool sync.Pool
+}
+
+func newBufferPool() *bufferPool {
+ return &bufferPool{
+ pool: sync.Pool{
+ New: func() interface{} {
+ return new(bytes.Buffer)
+ },
+ },
+ }
+}
+
+func (p *bufferPool) get() *bytes.Buffer {
+ return p.pool.Get().(*bytes.Buffer)
+}
+
+func (p *bufferPool) put(b *bytes.Buffer) {
+ p.pool.Put(b)
+}
+
+// recvMsg represents the received msg from the transport. All transport
+// protocol specific info has been removed.
+type recvMsg struct {
+ buffer *bytes.Buffer
+ // nil: received some data
+ // io.EOF: stream is completed. data is nil.
+ // other non-nil error: transport failure. data is nil.
+ err error
+}
+
+// recvBuffer is an unbounded channel of recvMsg structs.
+// Note recvBuffer differs from controlBuffer only in that recvBuffer
+// holds a channel of only recvMsg structs instead of objects implementing "item" interface.
+// recvBuffer is written to much more often than
+// controlBuffer and using strict recvMsg structs helps avoid allocation in "recvBuffer.put"
+type recvBuffer struct {
+ c chan recvMsg
+ mu sync.Mutex
+ backlog []recvMsg
+ err error
+}
+
+func newRecvBuffer() *recvBuffer {
+ b := &recvBuffer{
+ c: make(chan recvMsg, 1),
+ }
+ return b
+}
+
+func (b *recvBuffer) put(r recvMsg) {
+ b.mu.Lock()
+ if b.err != nil {
+ b.mu.Unlock()
+ // An error had occurred earlier, don't accept more
+ // data or errors.
+ return
+ }
+ b.err = r.err
+ if len(b.backlog) == 0 {
+ select {
+ case b.c <- r:
+ b.mu.Unlock()
+ return
+ default:
+ }
+ }
+ b.backlog = append(b.backlog, r)
+ b.mu.Unlock()
+}
+
+func (b *recvBuffer) load() {
+ b.mu.Lock()
+ if len(b.backlog) > 0 {
+ select {
+ case b.c <- b.backlog[0]:
+ b.backlog[0] = recvMsg{}
+ b.backlog = b.backlog[1:]
+ default:
+ }
+ }
+ b.mu.Unlock()
+}
+
+// get returns the channel that receives a recvMsg in the buffer.
+//
+// Upon receipt of a recvMsg, the caller should call load to send another
+// recvMsg onto the channel if there is any.
+func (b *recvBuffer) get() <-chan recvMsg {
+ return b.c
+}
+
+// recvBufferReader implements io.Reader interface to read the data from
+// recvBuffer.
+type recvBufferReader struct {
+ closeStream func(error) // Closes the client transport stream with the given error and nil trailer metadata.
+ ctx context.Context
+ ctxDone <-chan struct{} // cache of ctx.Done() (for performance).
+ recv *recvBuffer
+ last *bytes.Buffer // Stores the remaining data in the previous calls.
+ err error
+ freeBuffer func(*bytes.Buffer)
+}
+
+// Read reads the next len(p) bytes from last. If last is drained, it tries to
+// read additional data from recv. It blocks if there no additional data available
+// in recv. If Read returns any non-nil error, it will continue to return that error.
+func (r *recvBufferReader) Read(p []byte) (n int, err error) {
+ if r.err != nil {
+ return 0, r.err
+ }
+ if r.last != nil {
+ // Read remaining data left in last call.
+ copied, _ := r.last.Read(p)
+ if r.last.Len() == 0 {
+ r.freeBuffer(r.last)
+ r.last = nil
+ }
+ return copied, nil
+ }
+ if r.closeStream != nil {
+ n, r.err = r.readClient(p)
+ } else {
+ n, r.err = r.read(p)
+ }
+ return n, r.err
+}
+
+func (r *recvBufferReader) read(p []byte) (n int, err error) {
+ select {
+ case <-r.ctxDone:
+ return 0, ContextErr(r.ctx.Err())
+ case m := <-r.recv.get():
+ return r.readAdditional(m, p)
+ }
+}
+
+func (r *recvBufferReader) readClient(p []byte) (n int, err error) {
+ // If the context is canceled, then closes the stream with nil metadata.
+ // closeStream writes its error parameter to r.recv as a recvMsg.
+ // r.readAdditional acts on that message and returns the necessary error.
+ select {
+ case <-r.ctxDone:
+ // Note that this adds the ctx error to the end of recv buffer, and
+ // reads from the head. This will delay the error until recv buffer is
+ // empty, thus will delay ctx cancellation in Recv().
+ //
+ // It's done this way to fix a race between ctx cancel and trailer. The
+ // race was, stream.Recv() may return ctx error if ctxDone wins the
+ // race, but stream.Trailer() may return a non-nil md because the stream
+ // was not marked as done when trailer is received. This closeStream
+ // call will mark stream as done, thus fix the race.
+ //
+ // TODO: delaying ctx error seems like a unnecessary side effect. What
+ // we really want is to mark the stream as done, and return ctx error
+ // faster.
+ r.closeStream(ContextErr(r.ctx.Err()))
+ m := <-r.recv.get()
+ return r.readAdditional(m, p)
+ case m := <-r.recv.get():
+ return r.readAdditional(m, p)
+ }
+}
+
+func (r *recvBufferReader) readAdditional(m recvMsg, p []byte) (n int, err error) {
+ r.recv.load()
+ if m.err != nil {
+ return 0, m.err
+ }
+ copied, _ := m.buffer.Read(p)
+ if m.buffer.Len() == 0 {
+ r.freeBuffer(m.buffer)
+ r.last = nil
+ } else {
+ r.last = m.buffer
+ }
+ return copied, nil
+}
+
+type streamState uint32
+
+const (
+ streamActive streamState = iota
+ streamWriteDone // EndStream sent
+ streamReadDone // EndStream received
+ streamDone // the entire stream is finished.
+)
+
+// Stream represents an RPC in the transport layer.
+type Stream struct {
+ id uint32
+ st ServerTransport // nil for client side Stream
+ ct *http2Client // nil for server side Stream
+ ctx context.Context // the associated context of the stream
+ cancel context.CancelFunc // always nil for client side Stream
+ done chan struct{} // closed at the end of stream to unblock writers. On the client side.
+ ctxDone <-chan struct{} // same as done chan but for server side. Cache of ctx.Done() (for performance)
+ method string // the associated RPC method of the stream
+ recvCompress string
+ sendCompress string
+ buf *recvBuffer
+ trReader io.Reader
+ fc *inFlow
+ wq *writeQuota
+
+ // Callback to state application's intentions to read data. This
+ // is used to adjust flow control, if needed.
+ requestRead func(int)
+
+ headerChan chan struct{} // closed to indicate the end of header metadata.
+ headerChanClosed uint32 // set when headerChan is closed. Used to avoid closing headerChan multiple times.
+ // headerValid indicates whether a valid header was received. Only
+ // meaningful after headerChan is closed (always call waitOnHeader() before
+ // reading its value). Not valid on server side.
+ headerValid bool
+
+ // hdrMu protects header and trailer metadata on the server-side.
+ hdrMu sync.Mutex
+ // On client side, header keeps the received header metadata.
+ //
+ // On server side, header keeps the header set by SetHeader(). The complete
+ // header will merged into this after t.WriteHeader() is called.
+ header metadata.MD
+ trailer metadata.MD // the key-value map of trailer metadata.
+
+ noHeaders bool // set if the client never received headers (set only after the stream is done).
+
+ // On the server-side, headerSent is atomically set to 1 when the headers are sent out.
+ headerSent uint32
+
+ state streamState
+
+ // On client-side it is the status error received from the server.
+ // On server-side it is unused.
+ status *status.Status
+
+ bytesReceived uint32 // indicates whether any bytes have been received on this stream
+ unprocessed uint32 // set if the server sends a refused stream or GOAWAY including this stream
+
+ // contentSubtype is the content-subtype for requests.
+ // this must be lowercase or the behavior is undefined.
+ contentSubtype string
+}
+
+// isHeaderSent is only valid on the server-side.
+func (s *Stream) isHeaderSent() bool {
+ return atomic.LoadUint32(&s.headerSent) == 1
+}
+
+// updateHeaderSent updates headerSent and returns true
+// if it was alreay set. It is valid only on server-side.
+func (s *Stream) updateHeaderSent() bool {
+ return atomic.SwapUint32(&s.headerSent, 1) == 1
+}
+
+func (s *Stream) swapState(st streamState) streamState {
+ return streamState(atomic.SwapUint32((*uint32)(&s.state), uint32(st)))
+}
+
+func (s *Stream) compareAndSwapState(oldState, newState streamState) bool {
+ return atomic.CompareAndSwapUint32((*uint32)(&s.state), uint32(oldState), uint32(newState))
+}
+
+func (s *Stream) getState() streamState {
+ return streamState(atomic.LoadUint32((*uint32)(&s.state)))
+}
+
+func (s *Stream) waitOnHeader() {
+ if s.headerChan == nil {
+ // On the server headerChan is always nil since a stream originates
+ // only after having received headers.
+ return
+ }
+ select {
+ case <-s.ctx.Done():
+ // Close the stream to prevent headers/trailers from changing after
+ // this function returns.
+ s.ct.CloseStream(s, ContextErr(s.ctx.Err()))
+ // headerChan could possibly not be closed yet if closeStream raced
+ // with operateHeaders; wait until it is closed explicitly here.
+ <-s.headerChan
+ case <-s.headerChan:
+ }
+}
+
+// RecvCompress returns the compression algorithm applied to the inbound
+// message. It is empty string if there is no compression applied.
+func (s *Stream) RecvCompress() string {
+ s.waitOnHeader()
+ return s.recvCompress
+}
+
+// SetSendCompress sets the compression algorithm to the stream.
+func (s *Stream) SetSendCompress(str string) {
+ s.sendCompress = str
+}
+
+// Done returns a channel which is closed when it receives the final status
+// from the server.
+func (s *Stream) Done() <-chan struct{} {
+ return s.done
+}
+
+// Header returns the header metadata of the stream.
+//
+// On client side, it acquires the key-value pairs of header metadata once it is
+// available. It blocks until i) the metadata is ready or ii) there is no header
+// metadata or iii) the stream is canceled/expired.
+//
+// On server side, it returns the out header after t.WriteHeader is called. It
+// does not block and must not be called until after WriteHeader.
+func (s *Stream) Header() (metadata.MD, error) {
+ if s.headerChan == nil {
+ // On server side, return the header in stream. It will be the out
+ // header after t.WriteHeader is called.
+ return s.header.Copy(), nil
+ }
+ s.waitOnHeader()
+ if !s.headerValid {
+ return nil, s.status.Err()
+ }
+ return s.header.Copy(), nil
+}
+
+// TrailersOnly blocks until a header or trailers-only frame is received and
+// then returns true if the stream was trailers-only. If the stream ends
+// before headers are received, returns true, nil. Client-side only.
+func (s *Stream) TrailersOnly() bool {
+ s.waitOnHeader()
+ return s.noHeaders
+}
+
+// Trailer returns the cached trailer metedata. Note that if it is not called
+// after the entire stream is done, it could return an empty MD. Client
+// side only.
+// It can be safely read only after stream has ended that is either read
+// or write have returned io.EOF.
+func (s *Stream) Trailer() metadata.MD {
+ c := s.trailer.Copy()
+ return c
+}
+
+// ContentSubtype returns the content-subtype for a request. For example, a
+// content-subtype of "proto" will result in a content-type of
+// "application/grpc+proto". This will always be lowercase. See
+// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for
+// more details.
+func (s *Stream) ContentSubtype() string {
+ return s.contentSubtype
+}
+
+// Context returns the context of the stream.
+func (s *Stream) Context() context.Context {
+ return s.ctx
+}
+
+// Method returns the method for the stream.
+func (s *Stream) Method() string {
+ return s.method
+}
+
+// Status returns the status received from the server.
+// Status can be read safely only after the stream has ended,
+// that is, after Done() is closed.
+func (s *Stream) Status() *status.Status {
+ return s.status
+}
+
+// SetHeader sets the header metadata. This can be called multiple times.
+// Server side only.
+// This should not be called in parallel to other data writes.
+func (s *Stream) SetHeader(md metadata.MD) error {
+ if md.Len() == 0 {
+ return nil
+ }
+ if s.isHeaderSent() || s.getState() == streamDone {
+ return ErrIllegalHeaderWrite
+ }
+ s.hdrMu.Lock()
+ s.header = metadata.Join(s.header, md)
+ s.hdrMu.Unlock()
+ return nil
+}
+
+// SendHeader sends the given header metadata. The given metadata is
+// combined with any metadata set by previous calls to SetHeader and
+// then written to the transport stream.
+func (s *Stream) SendHeader(md metadata.MD) error {
+ return s.st.WriteHeader(s, md)
+}
+
+// SetTrailer sets the trailer metadata which will be sent with the RPC status
+// by the server. This can be called multiple times. Server side only.
+// This should not be called parallel to other data writes.
+func (s *Stream) SetTrailer(md metadata.MD) error {
+ if md.Len() == 0 {
+ return nil
+ }
+ if s.getState() == streamDone {
+ return ErrIllegalHeaderWrite
+ }
+ s.hdrMu.Lock()
+ s.trailer = metadata.Join(s.trailer, md)
+ s.hdrMu.Unlock()
+ return nil
+}
+
+func (s *Stream) write(m recvMsg) {
+ s.buf.put(m)
+}
+
+// Read reads all p bytes from the wire for this stream.
+func (s *Stream) Read(p []byte) (n int, err error) {
+ // Don't request a read if there was an error earlier
+ if er := s.trReader.(*transportReader).er; er != nil {
+ return 0, er
+ }
+ s.requestRead(len(p))
+ return io.ReadFull(s.trReader, p)
+}
+
+// tranportReader reads all the data available for this Stream from the transport and
+// passes them into the decoder, which converts them into a gRPC message stream.
+// The error is io.EOF when the stream is done or another non-nil error if
+// the stream broke.
+type transportReader struct {
+ reader io.Reader
+ // The handler to control the window update procedure for both this
+ // particular stream and the associated transport.
+ windowHandler func(int)
+ er error
+}
+
+func (t *transportReader) Read(p []byte) (n int, err error) {
+ n, err = t.reader.Read(p)
+ if err != nil {
+ t.er = err
+ return
+ }
+ t.windowHandler(n)
+ return
+}
+
+// BytesReceived indicates whether any bytes have been received on this stream.
+func (s *Stream) BytesReceived() bool {
+ return atomic.LoadUint32(&s.bytesReceived) == 1
+}
+
+// Unprocessed indicates whether the server did not process this stream --
+// i.e. it sent a refused stream or GOAWAY including this stream ID.
+func (s *Stream) Unprocessed() bool {
+ return atomic.LoadUint32(&s.unprocessed) == 1
+}
+
+// GoString is implemented by Stream so context.String() won't
+// race when printing %#v.
+func (s *Stream) GoString() string {
+ return fmt.Sprintf("<stream: %p, %v>", s, s.method)
+}
+
+// state of transport
+type transportState int
+
+const (
+ reachable transportState = iota
+ closing
+ draining
+)
+
+// ServerConfig consists of all the configurations to establish a server transport.
+type ServerConfig struct {
+ MaxStreams uint32
+ AuthInfo credentials.AuthInfo
+ InTapHandle tap.ServerInHandle
+ StatsHandler stats.Handler
+ KeepaliveParams keepalive.ServerParameters
+ KeepalivePolicy keepalive.EnforcementPolicy
+ InitialWindowSize int32
+ InitialConnWindowSize int32
+ WriteBufferSize int
+ ReadBufferSize int
+ ChannelzParentID int64
+ MaxHeaderListSize *uint32
+ HeaderTableSize *uint32
+}
+
+// NewServerTransport creates a ServerTransport with conn or non-nil error
+// if it fails.
+func NewServerTransport(protocol string, conn net.Conn, config *ServerConfig) (ServerTransport, error) {
+ return newHTTP2Server(conn, config)
+}
+
+// ConnectOptions covers all relevant options for communicating with the server.
+type ConnectOptions struct {
+ // UserAgent is the application user agent.
+ UserAgent string
+ // Dialer specifies how to dial a network address.
+ Dialer func(context.Context, string) (net.Conn, error)
+ // FailOnNonTempDialError specifies if gRPC fails on non-temporary dial errors.
+ FailOnNonTempDialError bool
+ // PerRPCCredentials stores the PerRPCCredentials required to issue RPCs.
+ PerRPCCredentials []credentials.PerRPCCredentials
+ // TransportCredentials stores the Authenticator required to setup a client
+ // connection. Only one of TransportCredentials and CredsBundle is non-nil.
+ TransportCredentials credentials.TransportCredentials
+ // CredsBundle is the credentials bundle to be used. Only one of
+ // TransportCredentials and CredsBundle is non-nil.
+ CredsBundle credentials.Bundle
+ // KeepaliveParams stores the keepalive parameters.
+ KeepaliveParams keepalive.ClientParameters
+ // StatsHandler stores the handler for stats.
+ StatsHandler stats.Handler
+ // InitialWindowSize sets the initial window size for a stream.
+ InitialWindowSize int32
+ // InitialConnWindowSize sets the initial window size for a connection.
+ InitialConnWindowSize int32
+ // WriteBufferSize sets the size of write buffer which in turn determines how much data can be batched before it's written on the wire.
+ WriteBufferSize int
+ // ReadBufferSize sets the size of read buffer, which in turn determines how much data can be read at most for one read syscall.
+ ReadBufferSize int
+ // ChannelzParentID sets the addrConn id which initiate the creation of this client transport.
+ ChannelzParentID int64
+ // MaxHeaderListSize sets the max (uncompressed) size of header list that is prepared to be received.
+ MaxHeaderListSize *uint32
+}
+
+// TargetInfo contains the information of the target such as network address and metadata.
+type TargetInfo struct {
+ Addr string
+ Metadata interface{}
+ Authority string
+}
+
+// NewClientTransport establishes the transport with the required ConnectOptions
+// and returns it to the caller.
+func NewClientTransport(connectCtx, ctx context.Context, target TargetInfo, opts ConnectOptions, onPrefaceReceipt func(), onGoAway func(GoAwayReason), onClose func()) (ClientTransport, error) {
+ return newHTTP2Client(connectCtx, ctx, target, opts, onPrefaceReceipt, onGoAway, onClose)
+}
+
+// Options provides additional hints and information for message
+// transmission.
+type Options struct {
+ // Last indicates whether this write is the last piece for
+ // this stream.
+ Last bool
+}
+
+// CallHdr carries the information of a particular RPC.
+type CallHdr struct {
+ // Host specifies the peer's host.
+ Host string
+
+ // Method specifies the operation to perform.
+ Method string
+
+ // SendCompress specifies the compression algorithm applied on
+ // outbound message.
+ SendCompress string
+
+ // Creds specifies credentials.PerRPCCredentials for a call.
+ Creds credentials.PerRPCCredentials
+
+ // ContentSubtype specifies the content-subtype for a request. For example, a
+ // content-subtype of "proto" will result in a content-type of
+ // "application/grpc+proto". The value of ContentSubtype must be all
+ // lowercase, otherwise the behavior is undefined. See
+ // https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests
+ // for more details.
+ ContentSubtype string
+
+ PreviousAttempts int // value of grpc-previous-rpc-attempts header to set
+}
+
+// ClientTransport is the common interface for all gRPC client-side transport
+// implementations.
+type ClientTransport interface {
+ // Close tears down this transport. Once it returns, the transport
+ // should not be accessed any more. The caller must make sure this
+ // is called only once.
+ Close() error
+
+ // GracefulClose starts to tear down the transport: the transport will stop
+ // accepting new RPCs and NewStream will return error. Once all streams are
+ // finished, the transport will close.
+ //
+ // It does not block.
+ GracefulClose()
+
+ // Write sends the data for the given stream. A nil stream indicates
+ // the write is to be performed on the transport as a whole.
+ Write(s *Stream, hdr []byte, data []byte, opts *Options) error
+
+ // NewStream creates a Stream for an RPC.
+ NewStream(ctx context.Context, callHdr *CallHdr) (*Stream, error)
+
+ // CloseStream clears the footprint of a stream when the stream is
+ // not needed any more. The err indicates the error incurred when
+ // CloseStream is called. Must be called when a stream is finished
+ // unless the associated transport is closing.
+ CloseStream(stream *Stream, err error)
+
+ // Error returns a channel that is closed when some I/O error
+ // happens. Typically the caller should have a goroutine to monitor
+ // this in order to take action (e.g., close the current transport
+ // and create a new one) in error case. It should not return nil
+ // once the transport is initiated.
+ Error() <-chan struct{}
+
+ // GoAway returns a channel that is closed when ClientTransport
+ // receives the draining signal from the server (e.g., GOAWAY frame in
+ // HTTP/2).
+ GoAway() <-chan struct{}
+
+ // GetGoAwayReason returns the reason why GoAway frame was received.
+ GetGoAwayReason() GoAwayReason
+
+ // RemoteAddr returns the remote network address.
+ RemoteAddr() net.Addr
+
+ // IncrMsgSent increments the number of message sent through this transport.
+ IncrMsgSent()
+
+ // IncrMsgRecv increments the number of message received through this transport.
+ IncrMsgRecv()
+}
+
+// ServerTransport is the common interface for all gRPC server-side transport
+// implementations.
+//
+// Methods may be called concurrently from multiple goroutines, but
+// Write methods for a given Stream will be called serially.
+type ServerTransport interface {
+ // HandleStreams receives incoming streams using the given handler.
+ HandleStreams(func(*Stream), func(context.Context, string) context.Context)
+
+ // WriteHeader sends the header metadata for the given stream.
+ // WriteHeader may not be called on all streams.
+ WriteHeader(s *Stream, md metadata.MD) error
+
+ // Write sends the data for the given stream.
+ // Write may not be called on all streams.
+ Write(s *Stream, hdr []byte, data []byte, opts *Options) error
+
+ // WriteStatus sends the status of a stream to the client. WriteStatus is
+ // the final call made on a stream and always occurs.
+ WriteStatus(s *Stream, st *status.Status) error
+
+ // Close tears down the transport. Once it is called, the transport
+ // should not be accessed any more. All the pending streams and their
+ // handlers will be terminated asynchronously.
+ Close() error
+
+ // RemoteAddr returns the remote network address.
+ RemoteAddr() net.Addr
+
+ // Drain notifies the client this ServerTransport stops accepting new RPCs.
+ Drain()
+
+ // IncrMsgSent increments the number of message sent through this transport.
+ IncrMsgSent()
+
+ // IncrMsgRecv increments the number of message received through this transport.
+ IncrMsgRecv()
+}
+
+// connectionErrorf creates an ConnectionError with the specified error description.
+func connectionErrorf(temp bool, e error, format string, a ...interface{}) ConnectionError {
+ return ConnectionError{
+ Desc: fmt.Sprintf(format, a...),
+ temp: temp,
+ err: e,
+ }
+}
+
+// ConnectionError is an error that results in the termination of the
+// entire connection and the retry of all the active streams.
+type ConnectionError struct {
+ Desc string
+ temp bool
+ err error
+}
+
+func (e ConnectionError) Error() string {
+ return fmt.Sprintf("connection error: desc = %q", e.Desc)
+}
+
+// Temporary indicates if this connection error is temporary or fatal.
+func (e ConnectionError) Temporary() bool {
+ return e.temp
+}
+
+// Origin returns the original error of this connection error.
+func (e ConnectionError) Origin() error {
+ // Never return nil error here.
+ // If the original error is nil, return itself.
+ if e.err == nil {
+ return e
+ }
+ return e.err
+}
+
+var (
+ // ErrConnClosing indicates that the transport is closing.
+ ErrConnClosing = connectionErrorf(true, nil, "transport is closing")
+ // errStreamDrain indicates that the stream is rejected because the
+ // connection is draining. This could be caused by goaway or balancer
+ // removing the address.
+ errStreamDrain = status.Error(codes.Unavailable, "the connection is draining")
+ // errStreamDone is returned from write at the client side to indiacte application
+ // layer of an error.
+ errStreamDone = errors.New("the stream is done")
+ // StatusGoAway indicates that the server sent a GOAWAY that included this
+ // stream's ID in unprocessed RPCs.
+ statusGoAway = status.New(codes.Unavailable, "the stream is rejected because server is draining the connection")
+)
+
+// GoAwayReason contains the reason for the GoAway frame received.
+type GoAwayReason uint8
+
+const (
+ // GoAwayInvalid indicates that no GoAway frame is received.
+ GoAwayInvalid GoAwayReason = 0
+ // GoAwayNoReason is the default value when GoAway frame is received.
+ GoAwayNoReason GoAwayReason = 1
+ // GoAwayTooManyPings indicates that a GoAway frame with
+ // ErrCodeEnhanceYourCalm was received and that the debug data said
+ // "too_many_pings".
+ GoAwayTooManyPings GoAwayReason = 2
+)
+
+// channelzData is used to store channelz related data for http2Client and http2Server.
+// These fields cannot be embedded in the original structs (e.g. http2Client), since to do atomic
+// operation on int64 variable on 32-bit machine, user is responsible to enforce memory alignment.
+// Here, by grouping those int64 fields inside a struct, we are enforcing the alignment.
+type channelzData struct {
+ kpCount int64
+ // The number of streams that have started, including already finished ones.
+ streamsStarted int64
+ // Client side: The number of streams that have ended successfully by receiving
+ // EoS bit set frame from server.
+ // Server side: The number of streams that have ended successfully by sending
+ // frame with EoS bit set.
+ streamsSucceeded int64
+ streamsFailed int64
+ // lastStreamCreatedTime stores the timestamp that the last stream gets created. It is of int64 type
+ // instead of time.Time since it's more costly to atomically update time.Time variable than int64
+ // variable. The same goes for lastMsgSentTime and lastMsgRecvTime.
+ lastStreamCreatedTime int64
+ msgSent int64
+ msgRecv int64
+ lastMsgSentTime int64
+ lastMsgRecvTime int64
+}
+
+// ContextErr converts the error from context package into a status error.
+func ContextErr(err error) error {
+ switch err {
+ case context.DeadlineExceeded:
+ return status.Error(codes.DeadlineExceeded, err.Error())
+ case context.Canceled:
+ return status.Error(codes.Canceled, err.Error())
+ }
+ return status.Errorf(codes.Internal, "Unexpected error from context packet: %v", err)
+}