diff --git a/SUMMARY.md b/SUMMARY.md
index 956a495..bb22cdd 100644
--- a/SUMMARY.md
+++ b/SUMMARY.md
@@ -58,7 +58,7 @@
 ## References
 
 * [Profile Reference](profiles/intro.md)
-    * [SEBA 1.0](profiles/seba/README.md)
+    * [SEBA](profiles/seba/README.md)
         * Install
             * [Install SEBA Charts](profiles/seba/install.md)
             * Workflows
@@ -70,6 +70,7 @@
                 * [SEBA-in-a-Box](profiles/seba/siab.md)
                 * [SEBA-in-a-Box with Fabric Switch](profiles/seba/siab-with-fabric-switch.md)
             * [Scale testing with BBSim](profiles/seba/bbsim.md)
+            * [Configuring a lab setup](profiles/seba/lab-setup.md)
         * Configure
             * [POD configuration](profiles/seba/configuration.md)
             * Workflow specific configuration
diff --git a/images/seba_lab_setup.png b/images/seba_lab_setup.png
new file mode 100644
index 0000000..4ba9910
--- /dev/null
+++ b/images/seba_lab_setup.png
Binary files differ
diff --git a/profiles/seba/lab-setup.md b/profiles/seba/lab-setup.md
new file mode 100644
index 0000000..d424494
--- /dev/null
+++ b/profiles/seba/lab-setup.md
@@ -0,0 +1,138 @@
+# Configuring a lab setup
+
+This document is not strictly related to SEBA, but will be helpful in the case you are trying to
+setup a POD in you lab.
+
+## Overview
+
+In a LAB setup you won't (most likely) use either a real RG or a real BNG, but they are not
+strictly needed to test a SEBA pod as:
+
+- the `RG` can be emulated by an `lxc` container (from now on `client`)
+- the `BNG` can be emulated by an ubuntu server
+
+![SEBA Lab Setup](../../images/seba_lab_setup.png)
+
+_The image above represents the data plane connections in a LAB setup. It does not include the kubernetes cluster for simplicity._
+
+What you'll need to emulate E2E traffic is:
+
+- 1 x86 server with Ubuntu 16.04 and (at least):
+    - 1 1G ethernet port
+    - 1 10G ethernet port (this can be a second 1G interface as long as you have a media converter)
+
+## Setting up a client
+
+The first thing you need to do is to install `lxd` on your server. To do that you can follow
+this guide: [http://tutorials.ubuntu.com/tutorial/tutorial-setting-up-lxd-1604](http://tutorials.ubuntu.com/tutorial/tutorial-setting-up-lxd-1604)
+
+Once `lxd` is successfully installed you can create a container using these commands:
+
+```bash
+lxc launch ubuntu:16.04 <name>
+lxc config device add <name> eth1 nic name=eth1 parent=<physical-intf> nictype=physical
+```
+
+where:
+
+- `name` is the desired container name, internally we use the ONU serial number as name
+- `physical-intf` is the name of the interface to which the ONU is physically connected
+
+Once the container is running you need to enter it and do some configuration.
+
+To access the container you can use the `lxc exec <name> bash` command.
+
+Once inside:
+
+```bash
+# activate the interface
+ip link set eth1 up
+# install the wpasupplicant tool
+apt update
+apt install wpasupplicant
+```
+
+> NOTE `wpasupplicant` is a linux tool to perform 802.1X authentication. More informations [here](https://help.ubuntu.com/community/WifiDocs/WPAHowTo)
+
+Create a configuration file for `wpasupplicant` in `/etc/wpa_supplicant/wpa_supplicant.conf` with the content:
+
+```text
+ctrl_interface=/var/run/wpa_supplicant
+eapol_version=1
+ap_scan=0
+fast_reauth=1
+network={
+        key_mgmt=WPA-EAP
+        eap=MD5
+        identity="user"
+        password="password"
+        ca_cert="/etc/cert/cacert.pem"
+        client_cert="/etc/cert/client.pem"
+        private_key="/etc/cert/client.key"
+        private_key_passwd="whatever"
+        eapol_flags=3
+} 
+```
+
+> NOTE that the configuration in this file is not really important if you are using the `freeradius` server provided
+> as part of the SEBA helm charts. Do not worry if the certificates do not exist, they won't affect authentication as
+> that is password based.
+
+At this point you'll be able kickoff the authentication process (by sending `EAPOL` packets into the system) with the command:
+
+```bash
+wpa_supplicant -i eth1 -Dwired -c /etc/wpa_supplicant/wpa_supplicant.conf
+```
+
+If everything has been set up correctly, you should see something similar in the VOLTHA logs:
+
+```bash
+cord@node1:~$ kubectl logs -f -n voltha vcore-0 | grep -E "packet_indication|packet-in" | grep 888e
+20180912T003237.453 DEBUG    MainThread adapter_agent.send_packet_in {adapter_name: openolt, logical_port_no: 16, logical_device_id: 000100000a5a0097, packet: 0180c200000390e2ba82fa8281000ffb888e01000009020100090175736572000000000000000000000000000000000000000000000000000000000000000000, event: send-packet-in, instance_id: compose_voltha_1_1536712228, vcore_id: 0001}
+```
+
+## Setting up the emulated BNG
+
+The emulated BNG needs to perform only two operations: `DHCP` and `NAT`.
+
+To setup a NAT router on an Ubuntu 16.04 server you can look at this tutorial: [https://www.nairabytes.net/81-linux/418-how-to-set-up-a-nat-router-on-ubuntu-server-16-04](https://www.nairabytes.net/81-linux/418-how-to-set-up-a-nat-router-on-ubuntu-server-16-04)
+
+To install a DHCP server you can follow this tutorial: [http://nairabytes.net/81-linux/415-how-to-install-a-dhcp-server-in-ubuntu-server-16-04](http://nairabytes.net/81-linux/415-how-to-install-a-dhcp-server-in-ubuntu-server-16-04)
+
+Once the `DHCP` server is installed, you need to configure it.
+
+### Create Q-in-Q interfaces
+
+On the interface that connects to the Agg Switch you are going to receive double tagged traffic,
+so you'll need to create interfaces to received it.
+
+Supposing that your subscriber is using `s_tag=111`, `c_tag=222` and the interface name is `eth2`
+you can use this commands to create it:
+
+```bash
+ip link add link eth2 name eth2.111 type vlan id 111
+ip link set eth2.111 up
+ip link add link eth2.111 name eth2.111.222 type vlan id 222
+ip link set eth2.111.222 up
+ip addr add 10.11.2.254/24 dev eth2.111.222
+```
+Then you'll need to tell the `dhcp` server to listen on that interface, you can do that by editing
+the file `/etc/default/isc-dhcp-server` so that it looks like:
+
+```bash
+INTERFACES="eth2.111.222"
+```
+
+> NOTE that you can list multiple interfaces, separated by spaces, in case you have multiple subscribers in your setup
+
+In the `/etc/dhcp/dhcpd.conf` config file, configure the ip address range to assing to the double tagged interface
+we created:
+
+```text
+subnet 10.11.2.0 netmask 255.255.255.0 {
+  range 10.11.2.1 10.11.2.100;
+  option routers 10.11.2.254;
+  option domain-name-servers 8.8.8.8;
+}
+```
+