| commit | e6cb061c40cd4fccda86690b90bf83e08090abd7 | [log] [tgz] |
|---|---|---|
| author | Luca Prete <luca@onlab.us> | Fri Dec 21 15:22:41 2018 -0800 |
| committer | Luca Prete <luca@onlab.us> | Fri Dec 21 15:22:41 2018 -0800 |
| tree | 493e97d282ff45e899b450c66db2206f0b0b63df | |
| parent | 977a6dd89303f1720b90e97932448187836816be [diff] |
Fixing cord charts repo address Change-Id: Ib5140aa821fb49d985a81df0a34ea5517afaa4a5
This guide describes how to install CORD on a physical POD. It identifies a set of prerequisites, and then walks through the steps involved in bringing up the Platform. Once the Platform is installed, you are ready to bring up one of the available Profiles:
This installation procedure requires management-network connectivity to the Internet. If your installation does not have such connectivity, or you are behind a restrictive firewall, consider Offline Install.
If you do not have the prerequisite hardware needed for a POD, consider running a complete system entirely emulated in software using SEBA-in-a-Box.
If you prefer a gentle walk through of process bringing up a subset of the CORD platform running on your lapto (e.g., to get an introduction to all the moving parts in CORD) then jumping to the Quick Start page is also an option.
Finally, if you want to get a broader lay-of-the-land, you might step back and read the Overview.