diff --git a/profiles/seba/troubleshoot/no-att-si.md b/profiles/seba/troubleshoot/no-att-si.md
index 82d170f..c810f69 100644
--- a/profiles/seba/troubleshoot/no-att-si.md
+++ b/profiles/seba/troubleshoot/no-att-si.md
@@ -106,7 +106,7 @@
 root@kafkacat-7f45f65485-2lgp8:/# kafkacat -b cord-platform-kafka -t onu.events
 ```
 
-If evetyhing is correct you should see:
+If everything is correct you should see:
 
 ```shell
 {"timestamp":"2018-12-19T22:34:00.755Z","status":"activated","serial_number":"ALPHe3d1cfe3","uni_port_id":16,"of_dpid":"of:000000000a5a007a"}
diff --git a/profiles/seba/troubleshoot/no-dhcp.md b/profiles/seba/troubleshoot/no-dhcp.md
index 63c1675..e2b9eea 100644
--- a/profiles/seba/troubleshoot/no-dhcp.md
+++ b/profiles/seba/troubleshoot/no-dhcp.md
@@ -1 +1,178 @@
 # RG is not getting IP from DHCP
+
+To debug a failing DHCP process, it is necessary to understand the packet flow
+through the system, the relevant flows in the hardware, and the expected logs.
+
+## DHCP Relay Process
+
+It is important to understand that DHCP will not succeed in the AT&T workflow, if
+the RG has not been authenticated. Once an RG successfully authenticates, flows
+that trap DHCP packets to VOLTHA and ONOS, as well as the subscribers's VLAN tags
+are programmed in the OLT as well as the AGG switch.
+
+Next it is important to understand that there are two ways the ONOS DHCP L2 Relay app
+can operate. DHCP packets received from the RG can be relayed to the server using
+either the OLT's uplink port (that connects to the AGG switch), or they can be
+relayed directly to the AGG switch's uplink port (that connects to the BNG/DHCP-server).
+By default, a SEBA pod uses the latter mechanism.
+
+![OLT Uplink for DHCP](./screenshots/olt-uplink.png "OLT Uplink for DHCP")
+
+![Switch Uplink for DHCP](./screenshots/switch-uplink.png "Switch Uplink for DHCP")
+
+The configuration for the DHCP relay app can be seen in the XOS GUI
+
+![Relay app configuration](./screenshots/dhcp-config.png "Relay app configuration")
+
+As shown, the SEBA pod's default configuration for dhcpl2relay sets the
+`useOltUplinkForServerPktInOut` flag to false, and provides the location of the
+server attachment on port 32 of the AGG switch (`of:0000000000000002/32`).
+Note: if you wish to try the OLT uplink for DHCP, set the flag to true, and remove
+the `dhcpServerConnectPoint` field.
+
+Finally, it is also useful to understand that DHCP packets are sent to the DHCP
+server QinQ tagged with the subscribers S and C VLAN tags (both 0x8100 ethertype).
+So if the server is not configured to accept double tagged packets, you won't get
+a DHCP reply.
+
+## Relevant Flows
+
+The DHCP packet-in/out from the OLT and the AGG switch depends on a few key flows.
+
+### OLT DHCP flows
+
+Connect to the [VOLTHA CLI](../../../charts/voltha.md#accessing-the-voltha-cli)
+and check the logical device flows
+
+```shell
+(voltha) logical_device 000100000a5a007a
+(logical device 000100000a5a007a) flows
+Logical Device 000100000a5a007a (type: n/a)
+Flows (12):
++----------+----------+-----------+---------+----------+----------+----------+---------+---------+--------------+--------------+----------+-----------+------------+------------+
+| table_id | priority |    cookie | in_port | vlan_vid | eth_type | ip_proto | udp_src | udp_dst |     metadata | set_vlan_vid | pop_vlan | push_vlan |     output | goto-table |
++----------+----------+-----------+---------+----------+----------+----------+---------+---------+--------------+--------------+----------+-----------+------------+------------+
+-snip-         |
+|        0 |    10000 | ~1ec4282a |   65536 |          |      800 |       17 |      67 |      68 |              |              |          |           | CONTROLLER |            |
+-snip-
+|        0 |    10000 | ~68a65ba0 |   30736 |          |      800 |       17 |      68 |      67 |              |              |          |           | CONTROLLER |            |
+```
+
+Note that the second flow above is necessary because it traps DHCP packets from the
+client (RG) - input port `30736` which is the UNI portnumber and `udp_src` port 68.
+The first flow above is not really required as it is meant to trap DHCP packets from
+the server on the OLT NNI port (in_port=65536). This is because in the SEBA POD,
+these packets from the server will never reach the OLT NNI port as they will be trapped
+earlier at the AGG switch uplink port.
+
+### AGG Switch DHCP flows
+
+There is only 1 flow that is essential for DHCP relay in the AGG switch.
+
+Connect to the [ONOS CLI](../../../charts/onos.md#accessing-the-onos-cli)
+and check the flows in the agg switch
+
+```shell
+onos> flows -s any of:0000000000000002 60
+deviceId=of:0000000000000002, flowRuleCount=12
+    ADDED, bytes=0, packets=0, table=60, priority=61000, selector=[IN_PORT:32, ETH_TYPE:ipv4, IP_PROTO:17, UDP_SRC:67, UDP_DST:68], treatment=[immediate=[OUTPUT:CONTROLLER], clearDeferred]
+-snip-
+```
+
+Ensure that you are using the correct AGG switch dpid, for example `of:0000000000000002`,
+and you are asking for the flows from Table 60 (the ACL table). As shown above,
+this flow matches on DHCP packets with UDP src port 67, and incoming port 32 on the
+AGG switch, which is where the DHCP server (BNG) is connected.
+
+## DHCP relay logs
+
+If all the flows look correct, you may wish to check ONOS logs for the DHCP transactions.
+First it will be useful to set the logging to TRACE for the dhcpl2relay app.
+From the ONOS CLI, use the following commands
+
+```shell
+onos> log:set TRACE org.opencord.dhcpl2relay
+onos> log:list
+Logger                   | Level
+--------------------------------
+ROOT                     | INFO
+org.opencord.aaa         | DEBUG
+org.opencord.dhcpl2relay | TRACE
+```
+
+Next, check the logs by grepping for the app logs
+
+```shell
+onos> log:tail | grep DhcpL2Relay
+
+2018-12-20 22:42:06,464 | INFO  | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Received DHCP Packet of type DHCPDISCOVER from of:000000000a5a007a/30736
+2018-12-20 22:42:06,474 | TRACE | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | DHCP packet received from client at of:000000000a5a007a/30736
+2018-12-20 22:42:07,597 | DEBUG | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | option82data [id:ISKT71e80080,cTag:222,sTag:222,nasPortId:PON 1/1/04/1:1.1.1,uplinkPort:-1,slot:-1,hardwareIdentifier:null,ipaddress:null,nasId:null,circuitId:foo2,remoteId:bar2]
+2018-12-20 22:42:07,600 | INFO  | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Finished processing packet.. relaying to dhcpServer
+2018-12-20 22:42:07,603 | TRACE | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Relaying packet to dhcp server at of:0000000000000002/32
+2018-12-20 22:42:08,000 | INFO  | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Received DHCP Packet of type DHCPOFFER from of:0000000000000002/32
+2018-12-20 22:42:08,002 | TRACE | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | DHCP packet received from server at of:0000000000000002/32
+2018-12-20 22:42:08,026 | INFO  | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Finished processing packet.. relaying to client
+2018-12-20 22:42:08,028 | INFO  | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Sending DHCP packet to client at of:000000000a5a007a/30736
+2018-12-20 22:42:08,029 | TRACE | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Relaying packet to dhcp client at of:000000000a5a007a/30736
+2018-12-20 22:42:08,088 | INFO  | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Received DHCP Packet of type DHCPREQUEST from of:000000000a5a007a/30736
+2018-12-20 22:42:08,088 | TRACE | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | DHCP packet received from client at of:000000000a5a007a/30736
+2018-12-20 22:42:08,092 | DEBUG | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | option82data [id:ISKT71e80080,cTag:222,sTag:222,nasPortId:PON 1/1/04/1:1.1.1,uplinkPort:-1,slot:-1,hardwareIdentifier:null,ipaddress:null,nasId:null,circuitId:foo2,remoteId:bar2]
+2018-12-20 22:42:08,093 | INFO  | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Finished processing packet.. relaying to dhcpServer
+2018-12-20 22:42:08,095 | TRACE | 33.102.179:59154 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Relaying packet to dhcp server at of:0000000000000002/32
+2018-12-20 22:42:08,148 | INFO  | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Received DHCP Packet of type DHCPACK from of:0000000000000002/32
+2018-12-20 22:42:08,148 | TRACE | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | DHCP packet received from server at of:0000000000000002/32
+2018-12-20 22:42:08,153 | INFO  | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Finished processing packet.. relaying to client
+2018-12-20 22:42:08,158 | INFO  | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Sending DHCP packet to client at of:000000000a5a007a/30736
+2018-12-20 22:42:08,159 | TRACE | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Relaying packet to dhcp client at of:000000000a5a007a/30736
+```
+
+Notice the app receives DHCPDISCOVER and DHCPREQUEST packets from the client RG at
+`of:000000000a5a007a/30736` and relays them to the server at `of:0000000000000002/32`.
+
+Similarly, the app receives DHCPOFFER and DHCPACK packets from `of:0000000000000002/32`
+and relays them to the client at `of:000000000a5a007a/30736`.
+
+Also note that the option-82 data is added to the packet before relaying to the
+server. This data, related to the subscriber is top down provisioned by the [operator
+in the AT&T workflow](../configuration.md). Without this configuration, DHCP will
+not work.
+
+If you wish to see the packets, check the logs (in TRACE) without
+the grep in the previous command. For example,
+
+```shell
+onos> log:tail
+-snip-
+2018-12-20 22:42:08,148 | INFO  | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | Received DHCP Packet of type DHCPACK from of:0000000000000002/32
+2018-12-20 22:42:08,148 | TRACE | 0.90.0.120:46211 | DhcpL2Relay                      | 186 - org.opencord.dhcpl2relay - 1.5.0 | DHCP packet received from server at of:0000000000000002/32
+ip
+dl_qinqVlan: 222
+dl_qinqVlan_pcp: 0
+dl_vlan: 222
+dl_vlan_pcp: 0
+dl_src: 00900b237d11
+dl_dst: 90e2ba82f975
+nw_src: 10.22.2.254
+nw_dst: 10.22.2.10
+nw_tos: 16
+nw_proto: 17
+tp_src: 67
+tp_dst: 68
+-snip-
+```
+
+shows the DHCP ACK packet received from the server with outer S-tag 222 (`dl_qinqVlan`)
+and the inner C-tag 222 (`dl_vlan`). Note that packets received from the client
+will only have the C-tag.
+
+You can also check the DHCP allocation on the ONOS CLI
+
+```shell
+onos> dhcpl2relay-allocations
+SubscriberId=PON 1/1/04/1:1.1.1,ConnectPoint=of:000000000a5a007a/30736,State=DHCPACK,MAC=90:E2:BA:82:F9:75,CircuitId=None,IP Allocated=10.22.2.10,Allocation Timestamp=2018-12-20T22:42:08.153Z
+```
+
+and in the XOS GUI, the relevant AAA authentication and DHCP status.
+
+![DHCP State](./screenshots/dhcp-state.png "DHCP State")
diff --git a/profiles/seba/troubleshoot/screenshots/dhcp-config.png b/profiles/seba/troubleshoot/screenshots/dhcp-config.png
new file mode 100644
index 0000000..3a0d789
--- /dev/null
+++ b/profiles/seba/troubleshoot/screenshots/dhcp-config.png
Binary files differ
diff --git a/profiles/seba/troubleshoot/screenshots/dhcp-state.png b/profiles/seba/troubleshoot/screenshots/dhcp-state.png
new file mode 100644
index 0000000..ba1eccc
--- /dev/null
+++ b/profiles/seba/troubleshoot/screenshots/dhcp-state.png
Binary files differ
diff --git a/profiles/seba/troubleshoot/screenshots/olt-uplink.png b/profiles/seba/troubleshoot/screenshots/olt-uplink.png
new file mode 100644
index 0000000..a5beb60
--- /dev/null
+++ b/profiles/seba/troubleshoot/screenshots/olt-uplink.png
Binary files differ
diff --git a/profiles/seba/troubleshoot/screenshots/switch-uplink.png b/profiles/seba/troubleshoot/screenshots/switch-uplink.png
new file mode 100644
index 0000000..a01d834
--- /dev/null
+++ b/profiles/seba/troubleshoot/screenshots/switch-uplink.png
Binary files differ
diff --git a/profiles/seba/workflows/att-configure.md b/profiles/seba/workflows/att-configure.md
index 4426858..df04375 100644
--- a/profiles/seba/workflows/att-configure.md
+++ b/profiles/seba/workflows/att-configure.md
@@ -5,7 +5,7 @@
 
 ## Whitelist population
 
-> NOTE: the whitelist can be populated at any time. 
+> NOTE: the whitelist can be populated at any time.
 > It doesn't need to be done upfront.
 
 To configure the ONU whitelist, you can use this TOSCA:
@@ -40,7 +40,7 @@
 For instructions on how to push TOSCA into a CORD POD, please
 refer to this [guide](../../../xos-tosca/README.md).
 
-### Where to find the required informations
+### Where to find the required information
 
 #### Serial Number