updates siab-with-fabric-switch
Change-Id: If96aba07fa349cf053f02dd2e3d59ebdd2ddadc2
diff --git a/profiles/seba/siab-with-fabric-switch.md b/profiles/seba/siab-with-fabric-switch.md
index 4a68e16..c90ca24 100644
--- a/profiles/seba/siab-with-fabric-switch.md
+++ b/profiles/seba/siab-with-fabric-switch.md
@@ -27,7 +27,7 @@
$ sudo cp /tmp/pon0_group_fwd_mask /sys/class/net/pon0/bridge/group_fwd_mask
```
-1. Modify `~/cord/helm-charts/xos-profiles/ponsim-pod/tosca/020-pod-olt.yaml`. Update `switch_datapath_id` to your fabric-switch dpid, and `switch_port` and `uplink` to the port number of Fabric-switch to which the Kubernetes node running OLT is connected.
+1. Modify `~/cord/helm-charts/xos-profiles/ponsim-pod/tosca/020-pod-olt.yaml`. Update `switch_datapath_id` to your fabric-switch dpid and `switch_port` to the port number of Fabric-switch to which the Kubernetes node running OLT is connected.
```yaml
olt_device:
type: tosca.nodes.OLTDevice
@@ -73,4 +73,15 @@
...
```
-1. Install the Modified TOSCA ponsim-pod charts and proceed to step [Validating the install](siab.md#validating-the-install).
\ No newline at end of file
+1. Configure Q-n-Q interface and enable DHCP services on the DHCP Server (BNG) interface connected to `Fabric-switch` (Change the interface names as per your setup).
+
+ ```bash
+ sudo ip link add link ens1d1 name ens1d1.222 type vlan id 222
+ sudo ip link set ens1d1.222 up
+ sudo ip link add link ens1d1.222 name ens1d1.222.111 type vlan id 111
+ sudo ip link set ens1d1.222.111 up
+ sudo ip addr add 172.18.0.10/24 dev ens1d1.222.111
+ ```
+ Choose any dhcp-server of your choice and run DHCP services on the Q-n-Q interface with range `172.18.0.50 - 172.18.0.100`.
+
+1. Install the Modified TOSCA ponsim-pod charts and proceed to step [Validating the install](siab.md#validating-the-install).