CORD uses the Trellis fabric to connect the data plane components together. This section describes how to setup the software for these switches.
The latest Trellis Fabric documentation can be found on the CORD wiki.
The list of supported hardware can be found in the hardware requirements page.
All CORD-compatible switches use Open Networking Linux (ONL) as operating system. The latest compatible ONL image can be downloaded from here.
Checksum: sha256:2db316ea83f5dc761b9b11cc8542f153f092f3b49d82ffc0a36a2c41290f5421
Guidelines on how to install ONL on top of an ONIE compatible device can be found directly on the ONL website.
This specific version of ONL has been customized to accept an IP address through DHCP on the management interface, ma0. If you'd like to use a static IP, first give it an IP address through DHCP, then login and change the configuration in /etc/network/interfaces.
The default username and password are root / onl.
Once ONL is installed OFDPA drivers will need to be installed as well. Each switch model requires a specific version of OFDPA. All driver packages are distributed as DEB packages, which makes the installation process straightforward.
First, copy the package to the switch. For example
scp your-ofdpa.deb root@fabric-switch-ip:
Then, install the DEB package
dpkg -i your-ofdpa.deb
Two OFDPA drivers are available: