Known Issues

SEBA 1.0 Release

There are known major issues having to do with rebooting of the physical hardware, both the OLT and the AGG switch, as well as continuously deleting/re-creating of an OLT Device via NEM. These issues are described in more detail in below:

  • SEBA-388 With this issue, DHCP may not work after AGG switch reboot. A possible workaround is to use a different config for the DHCPl2Relay app that uses the OLT's uplink to reach the DHCP Server, instead of the Switch's uplink. More details are described here
  • SEBA-385 With this issue, the OLT may not pass traffic anymore after reboot. Currently, the only workaround is to, enter the ONOS CLI and force a 'device-remove <<device-id>' for the device from VOLTHA (in other words, force VOLTHA to reconnect to ONOS), and then perform the authentication/dhcp steps again for the subscribers
  • SEBA-393 With this issue, if an OLT device gets deleted and re-created many times within a short period of time (10+ times within an hour or so), VOLTHA may run into an issue where it's unable to save any information pertaining the OLT device such as its ports or any ONU devices connected to those ports. The workaround for this issue is to re-install VOLTHA and re-create the OLT device through NEM.

Fixes to these issues will be addressed soon after the release.

Another minor issue that does not affect functionality is related to the state of an ONU on the VOLTHA CLI, after disable/re-enable of the ONU.

(voltha) devices
Devices:
+------------------+-------------------+------+------------------+------------------+-------------+-------------+----------------+----------------+------------------+------------------------+-------------------------+--------------------------+----------------------+------------------------------+
|               id |              type | root |        parent_id |    serial_number | admin_state | oper_status | connect_status | parent_port_no |    host_and_port |                 reason | proxy_address.device_id | proxy_address.channel_id | proxy_address.onu_id | proxy_address.onu_session_id |
+------------------+-------------------+------+------------------+------------------+-------------+-------------+----------------+----------------+------------------+------------------------+-------------------------+--------------------------+----------------------+------------------------------+
| 0001a82d21249c28 |           openolt | True | 000100000a5a007a | 10.90.0.122:9191 |     ENABLED |      ACTIVE |      REACHABLE |                | 10.90.0.122:9191 |                        |                         |                          |                      |                              |
| 00014f81e9f21dbb | brcm_openomci_onu | True | 0001a82d21249c28 |     ALPHe3d1cf9d |     ENABLED |      ACTIVE |      REACHABLE |      536870912 |                  | initial-mib-downloaded |        0001a82d21249c28 |                          |                    1 |                            1 |
| 0001666321e17127 | brcm_openomci_onu | True | 0001a82d21249c28 |     ALPHe3d1ced5 |     ENABLED |      ACTIVE |      REACHABLE |      536870912 |                  | initial-mib-downloaded |        0001a82d21249c28 |                          |                    2 |                            2 |
| 000175a511654437 | brcm_openomci_onu | True | 0001a82d21249c28 |     ISKT71e80080 |     ENABLED |      ACTIVE |      REACHABLE |      536870927 |                  |      omci-flows-pushed |        0001a82d21249c28 |                       15 |                    1 |                            1 |
| 0001cb66a703449d | brcm_openomci_onu | True | 0001a82d21249c28 |     ALPHe3d1cfe3 |     ENABLED |      ACTIVE |      REACHABLE |      536870912 |                  | initial-mib-downloaded |        0001a82d21249c28 |                          |                    3 |                            3 |
| 0001246c72a99ddd | brcm_openomci_onu | True | 0001a82d21249c28 |     ALPHe3d1cf8e |     ENABLED |      ACTIVE |      REACHABLE |      536870912 |                  | initial-mib-downloaded |        0001a82d21249c28 |                          |                    4 |                            4 |
| 000192f54601ecb4 | brcm_openomci_onu | True | 0001a82d21249c28 |     ALPHe3d1cf70 |     ENABLED |      ACTIVE |      REACHABLE |      536870912 |                  | initial-mib-downloaded |        0001a82d21249c28 |                          |                    5 |                            5 |
+------------------+-------------------+------+------------------+------------------+-------------+-------------+----------------+----------------+------------------+------------------------+-------------------------+--------------------------+----------------------+------------------------------+

In the reason column of the devices table, the state of the ONU devices are displayed. Normally after an ONU is disabled, and then re-enabled, it should display the initial-mib-downloaded state, indicating that the RG behind the ONU should be ready to re-authenticate (as per the AT&T workflow). However, in this release, the state is incorrectly displayed as omci-flows-pushed. This does not affect authentication, dhcp or the subscribers.