Linking libraries and stopping iperf3 before re-installing
Change-Id: Ieddd6077561e7684f43c9a29e95f60f1c1c98fa8
diff --git a/profiles/seba/lab-setup.md b/profiles/seba/lab-setup.md
index 84a1a75..f85c0fe 100644
--- a/profiles/seba/lab-setup.md
+++ b/profiles/seba/lab-setup.md
@@ -74,6 +74,7 @@
git clone https://github.com/esnet/iperf.git -b 3.9
cd iperf
./configure && make && sudo make install
+ldconfig
```
> NOTE `wpasupplicant` is a linux tool to perform 802.1X authentication. More informations [here](https://help.ubuntu.com/community/WifiDocs/WPAHowTo)
@@ -176,16 +177,18 @@
options used in the tests.
```bash
#remove existing installation if any
+sudo service iperf3 stop
sudo apt-get remove --purge iperf3
#Clone and install from source
git clone https://github.com/esnet/iperf.git -b 3.9
cd iperf
./configure && make && sudo make install
+sudo ldconfig
```
After installing `iperf3` on the BNG node it needs to be configured.
Create the `iperf3.service` file:
```bash
-vi /etc/systemd/system/iperf3.service
+sudo vi /etc/systemd/system/iperf3.service
```
Include this content in the newly created file:
```bash
@@ -196,9 +199,13 @@
[Install]
WantedBy=multi-user.target
```
-Finally, start the iperf3 service
+Start the iperf3 service
```bash
sudo service iperf3 start
```
+Finally, check the iperf3 service
+```bash
+sudo service iperf3 status
+```