diff --git a/docs/installation_guide.md b/docs/installation_guide.md
index ac1356e..0312257 100644
--- a/docs/installation_guide.md
+++ b/docs/installation_guide.md
@@ -522,3 +522,19 @@
 
 ## Success: Ping!
 If everything works fine, the two hosts should be able to ping one each other.
+
+# Connecting to Internet
+A local E-CORD pod is also capable of connecting an enterprise to the public Internet through the same CPE we leverage to setup the EVC.
+
+In order to achive this connectivity you need to:
+* Generate traffic with a different c-tag form the ones used in your EVCs.
+* Install a rule in the MicroSemi EA1000 CPE to take the newly tagged traffic and push a different s-tag than the one used for EVCs.
+* Configure the IP of the leaf switch interface to which the upstream router is connected. The IP of this interface needs to be on the same subnet as the upstream router.
+* Configure in ONOS fabric a default route to the upstream router.
+* Configure a cross connect into the fabric to ensure the traffic gets forwarded towards the compute node where the vEG instances get spawned.
+* Create a subsciber. A an example of how to run a test one is
+  [here](https://guide.opencord.org/profiles/ecord/dev_guide.html#run-an-e-cord-test-subscriber). This
+  subscriber creates an instance of the different services needed to
+  connect to the public Internet.
+
+At this point you should be able to connect to the public Internet through your E-CORD local pod.