AETHER-3573 Simplify configuration files in enodebd
Change-Id: I048d743c0677c85244b87a6c6444f39c06f6bf4b
diff --git a/magma_configs/acs_common.yml b/magma_configs/acs_common.yml
index f757526..dc46cd7 100644
--- a/magma_configs/acs_common.yml
+++ b/magma_configs/acs_common.yml
@@ -1,16 +1,110 @@
-# SPDX-FileCopyrightText: 2020 The Magma Authors.
# SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org>
#
# SPDX-License-Identifier: BSD-3-Clause
-bandwidthMhz: 100
-specialSubframePattern: 7
-earfcndl: 44490
-plmnidList: "00101"
-pci: 1
-allowEnodebTransmit: False
-subframeAssignment: 2
-tac: 1
-cell_id: 1
-mme_address: ""
-mme_port: 36412
+basic:
+ cell_id: 100
+ mme_address: 172.21.143.206
+ mme_port: 36412
+ plmn_list: "305010"
+ pci_list: "100,101"
+ allow_enodeb_transmit: False
+
+ carrier_number: 2
+ carrier_agg_enable: False
+
+# Automation Configuration Server
+acs:
+ # To enable/disable to connect the management server (ACS)
+ cwmp_enable: True
+ # Define to enable/disable a periodic inform
+ periodic_inform_enable: True
+ # Interval of a preiodic inform send to ACS
+ periodic_inform_interval: 180
+
+cell:
+ # If True, 64QAM is allowed [TS 36.331]
+ enable64qam: True
+ # Physical Cell ID for cell 1 and cell 2
+ pci1: 100
+ pci2: 101
+ # Tracking Area Code for cell 1 and cell 2
+ tac1: 501
+ tac2: 502
+ # Downlink/Uplink bandwidth
+ downlink_bandwidth: 25
+ uplink_bandwidth: 25
+ # EARFCN for 1st frequency band
+ earfcn_downlink1: 55440
+ earfcn_uplink1: 55440
+ # EARFCN for 2nd frequency band
+ earfcn_downlink2: 55640
+ earfcn_uplink2: 55640
+ # EARFCN for 1st + 2nd frequency band
+ earfcn_downlink_list: "55440,55640"
+ earfcn_uplink_list: "55440,55640"
+ # First/Second Frequency Band Indicator
+ frequency_band_1: 48
+ frequency_band_2: 48
+ # Frequency Band List
+ frequency_band_list: "48, 48"
+ # The DL/UL subframe configuration
+ subframe_assignment: 2
+ # The TDD special sub-frame pattern [TS 36.331 sec 6.3.2]
+ special_subframe_pattern: 7
+
+ # The real TX power
+ tx_power: 20
+ # Tunnel type
+ tunnel_type: "Device.IP.Interface.1.IPv4Address.1."
+
+
+# Femtocell Access Point Control Parameters
+fap_control:
+ # The administrative state of LTE FAP
+ # If True, the cell unlock and enable RF to serve traffic
+ admin_state: False
+ # Radio Resource Management
+ is_ca_frequency_contiguous: 0
+
+# Radio Environment Map Parameters
+rem:
+ primary_source: "FREE_RUNNING"
+
+# Spectrum Access System (SAS)
+sas:
+ # If True, eNodeB will be admistrated by SAS
+ sas_enable: True
+ # If True, it indicates device configuration was signed by CPI key
+ cpi_enable: True
+ # If True, add manufacturer name as prefix of Serial Number
+ manufacturer_prefix_enable: True
+ # The SAS server address
+ sas_server_url: "https://sas.goog/v1.2/"
+ # The username registered to SAS
+ sas_uid: "aether"
+ # Define device's SAS category [CFR 96.39(c)]
+ sas_category: "A"
+ # PAL or GAA
+ sas_channel_type: "GAA"
+ # The device's certification name, it uses to communicate with SAS server
+ sas_cert_subject: "ENODEBD_CONFIGURED_SAS_CERT"
+ # Location: indoor / outdoor
+ sas_location: "indoor"
+ # AGL or AMSL
+ sas_height_type: "AGL"
+ # FCC ID of device
+ sas_fccid: "ENODEBD_CONFIGURED_FCCID"
+ # RECEIVED_POWER_WITH_GRANT / RECEIVED_POWER_WITHOUT_GRANT
+ sas_measure_capability: "RECEIVED_POWER_WITHOUT_GRANT"
+ # Your CPI name
+ sas_cpi_name: "ONF_CPI"
+ # Your CPI Certification ID
+ sas_cpi_id: "GOOG-999999"
+ # Device antenna parameters
+ sas_antenna_azimuth: 0
+ sas_antenna_downtilt: 0
+ sas_antenna_gain: 5
+ sas_antenna_beamwidth: 360
+ # The signature of configuration
+ sas_cpi_signature_data: "ENODEBD_CONFIGURED_CPI_SIGNED_DATA"