diff --git a/devices/device_map.py b/devices/device_map.py
index 10aa841..d061c4a 100644
--- a/devices/device_map.py
+++ b/devices/device_map.py
@@ -12,7 +12,7 @@
 from devices.baicells_rts import BaicellsRTSHandler
 from devices.device_utils import EnodebDeviceName
 from devices.experimental.cavium import CaviumHandler
-from devices.freedomfi_one import FreedomFiOneHandler
+from devices.sercomm import SercommHandler
 from state_machines.enb_acs import EnodebAcsStateMachine
 
 # This exists only to break a circular dependency. Otherwise there's no
@@ -26,7 +26,7 @@
     EnodebDeviceName.BAICELLS_QAFB: BaicellsQAFBHandler,
     EnodebDeviceName.BAICELLS_RTS: BaicellsRTSHandler,
     EnodebDeviceName.CAVIUM: CaviumHandler,
-    EnodebDeviceName.FREEDOMFI_ONE: FreedomFiOneHandler,
+    EnodebDeviceName.SERCOMM: SercommHandler,
 }
 
 
diff --git a/devices/device_utils.py b/devices/device_utils.py
index 1f951e2..1745867 100644
--- a/devices/device_utils.py
+++ b/devices/device_utils.py
@@ -21,7 +21,7 @@
     BAICELLS_QAFB = "Baicells QAFB"
     BAICELLS_RTS = "Baicells RTS"
     CAVIUM = "Cavium"
-    FREEDOMFI_ONE = "FREEDOMFI ONE"
+    SERCOMM = "Sercomm"
 
 
 def get_device_name(device_oui: str, sw_version: str,) -> str:
@@ -67,7 +67,7 @@
     elif device_oui in {"000FB7", "744D28"}:
         return EnodebDeviceName.CAVIUM
     elif device_oui == "000E8F":
-        return EnodebDeviceName.FREEDOMFI_ONE
+        return EnodebDeviceName.SERCOMM
     else:
         raise UnrecognizedEnodebError("Device %s unsupported" % device_oui)
 
diff --git a/devices/freedomfi_one.py b/devices/freedomfi_one.py
index 9ad6b00..6149ff6 100644
--- a/devices/freedomfi_one.py
+++ b/devices/freedomfi_one.py
@@ -1,8 +1,15 @@
-# SPDX-FileCopyrightText: 2020 The Magma Authors.
-# SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org>
-#
-# SPDX-License-Identifier: BSD-3-Clause
+"""
+Copyright 2020 The Magma Authors.
 
+This source code is licensed under the BSD-style license found in the
+LICENSE file in the root directory of this source tree.
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+"""
 import logging
 from typing import Any, Callable, Dict, List, Optional, Type
 
@@ -41,9 +48,6 @@
     EndSessionState,
     EnodebAcsState,
     ErrorState,
-    DownloadState,
-    WaitDownloadResponseState,
-    WaitInformTransferCompleteState,
     GetParametersState,
     SetParameterValuesState,
     WaitGetParametersState,
@@ -81,17 +85,7 @@
             ),
             # Read transient readonly params.
             "get_transient_params": FreedomFiOneSendGetTransientParametersState(
-                self, when_upgrade="firmware_upgrade", when_done="get_params",
-            ),
-            "firmware_upgrade": DownloadState(self, when_done="wait_download_response"),
-            "wait_download_response": WaitDownloadResponseState(
-                self, when_done="wait_transfer_complete"
-            ),
-            "wait_transfer_complete": WaitInformTransferCompleteState(
-                self,
-                when_done="get_params",
-                when_periodic="wait_transfer_complete",
-                when_timeout="end_session",
+                self, when_done="get_params",
             ),
             "get_params": FreedomFiOneGetObjectParametersState(
                 self,
@@ -338,18 +332,6 @@
             type=TrParameterType.STRING,
             is_optional=False,
         ),
-        ParameterName.SW_VERSION: TrParam(
-            "Device.DeviceInfo.SoftwareVersion",
-            is_invasive=False,
-            type=TrParameterType.STRING,
-            is_optional=False,
-        ),
-        ParameterName.SERIAL_NUMBER: TrParam(
-            "Device.DeviceInfo.SerialNumber",
-            is_invasive=False,
-            type=TrParameterType.STRING,
-            is_optional=False,
-        ),
     }
 
     # Derived status params that don't have tr69 representation.
@@ -492,8 +474,6 @@
             )
 
         pass_through_params = [ParameterName.GPS_LAT, ParameterName.GPS_LONG]
-
-        print(name_to_val)
         for name in pass_through_params:
             device_cfg.set_parameter(name, name_to_val[name])
 
@@ -570,6 +550,18 @@
             is_optional=False,
         ),
         # Device info
+        ParameterName.SW_VERSION: TrParam(
+            "Device.DeviceInfo.SoftwareVersion",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SERIAL_NUMBER: TrParam(
+            "Device.DeviceInfo.SerialNumber",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
         ParameterName.IP_ADDRESS: TrParam(
             "Device.IP.Interface.1.IPv4Address.1.IPAddress",
             is_invasive=False,
@@ -652,7 +644,7 @@
         ParameterName.SUBFRAME_ASSIGNMENT: TrParam(
             FAPSERVICE_PATH + "CellConfig.LTE.RAN.PHY.TDDFrame.SubFrameAssignment",
             is_invasive=False,
-            type=TrParameterType.INT,
+            type=TrParameterType.BOOLEAN,
             is_optional=False,
         ),
         ParameterName.SPECIAL_SUBFRAME_PATTERN: TrParam(
@@ -661,12 +653,6 @@
             type=TrParameterType.INT,
             is_optional=False,
         ),
-        ParameterName.CELL_ENABLE64QAM: TrParam(
-            FAPSERVICE_PATH + "CellConfig.LTE.RAN.PHY.PUSCH.Enable64QAM",
-            is_invasive=False,
-            type=TrParameterType.BOOLEAN,
-            is_optional=False,
-        ),
         ParameterName.CELL_ID: TrParam(
             FAPSERVICE_PATH + "CellConfig.LTE.RAN.Common.CellIdentity",
             is_invasive=False,
@@ -898,10 +884,9 @@
     Some eNB parameters are read only and updated by the eNB itself.
     """
 
-    def __init__(self, acs: EnodebAcsStateMachine, when_upgrade: str, when_done: str):
+    def __init__(self, acs: EnodebAcsStateMachine, when_done: str):
         super().__init__()
         self.acs = acs
-        self.upgrade_transition = when_upgrade
         self.done_transition = when_done
 
     def get_msg(self, message: Any) -> AcsMsgAndTransition:
@@ -910,6 +895,11 @@
         request.ParameterNames = models.ParameterNames()
         request.ParameterNames.string = []
 
+        # request = models.GetParameterNames()
+        # request.ParameterPath = "Device."
+        # request.NextLevel = False
+
+        # Get the status parameters which was defined in Line 171
         for _, tr_param in StatusParameters.STATUS_PARAMETERS.items():
             path = tr_param.path
             request.ParameterNames.string.append(path)
@@ -933,15 +923,7 @@
             name_to_val, self.acs.device_cfg,
         )
 
-        print("In get transient state", name_to_val, type(name_to_val))
-        if name_to_val["SW version"] != "TEST3918@210224":
-            print("Get into Firmware Upgrade state")
-            return AcsReadMsgResult(
-                msg_handled=True, next_state=self.upgrade_transition
-            )
-
-        print("Skip firmware upgrade, configure the enb")
-        return AcsReadMsgResult(msg_handled=True, next_state=self.done_transition)
+        return AcsReadMsgResult(msg_handled=True, next_state=self.done_transition,)
 
     def state_description(self) -> str:
         return "Getting transient read-only parameters"
diff --git a/devices/sercomm.py b/devices/sercomm.py
new file mode 100644
index 0000000..72df821
--- /dev/null
+++ b/devices/sercomm.py
@@ -0,0 +1,1143 @@
+# SPDX-FileCopyrightText: 2020 The Magma Authors.
+# SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org>
+#
+# SPDX-License-Identifier: BSD-3-Clause
+
+import logging
+from typing import Any, Callable, Dict, List, Optional, Type
+
+from common.service import MagmaService
+from data_models import transform_for_magma
+from data_models.data_model import (
+    DataModel,
+    InvalidTrParamPath,
+    TrParam,
+)
+from data_models.data_model_parameters import (
+    ParameterName,
+    TrParameterType,
+)
+from configuration.service_configs import load_enb_config
+from device_config.configuration_init import build_desired_config
+from device_config.enodeb_config_postprocessor import EnodebConfigurationPostProcessor
+from device_config.enodeb_configuration import EnodebConfiguration
+from devices.device_utils import EnodebDeviceName
+from logger import EnodebdLogger
+from state_machines.acs_state_utils import (
+    get_all_objects_to_add,
+    get_all_objects_to_delete,
+    get_all_param_values_to_set,
+    get_params_to_get,
+    parse_get_parameter_values_response,
+)
+from state_machines.enb_acs import EnodebAcsStateMachine
+from state_machines.enb_acs_impl import BasicEnodebAcsStateMachine
+from state_machines.enb_acs_states import (
+    AcsMsgAndTransition,
+    AcsReadMsgResult,
+    AddObjectsState,
+    DeleteObjectsState,
+    EnbSendRebootState,
+    EndSessionState,
+    EnodebAcsState,
+    ErrorState,
+    DownloadState,
+    WaitDownloadResponseState,
+    WaitInformTransferCompleteState,
+    GetParametersState,
+    SetParameterValuesState,
+    WaitGetParametersState,
+    WaitInformMRebootState,
+    WaitInformState,
+    WaitRebootResponseState,
+    WaitSetParameterValuesState,
+    CheckStatusState,
+)
+from tr069 import models
+
+
+FAPSERVICE_PATH = "Device.Services.FAPService.1."
+FAP_CONTROL = FAPSERVICE_PATH + "FAPControl."
+
+
+class SercommHandler(BasicEnodebAcsStateMachine):
+    def __init__(self, service: MagmaService,) -> None:
+        self._state_map = {}
+        super().__init__(service=service, use_param_key=True)
+
+    def reboot_asap(self) -> None:
+        self.transition("reboot")
+
+    def is_enodeb_connected(self) -> bool:
+        return not isinstance(self.state, WaitInformState)
+
+    def _init_state_map(self) -> None:
+        self._state_map = {
+            # Inform comes in -> Respond with InformResponse
+            "wait_inform": WaitInformState(self, when_done="get_rpc_methods"),
+            # If first inform after boot -> GetRpc request comes in, if not
+            # empty request comes in => Transition to get_transient_params
+            "get_rpc_methods": SercommGetInitState(
+                self, when_done="get_transient_params",
+            ),
+            # Read transient readonly params.
+            "get_transient_params": SercommSendGetTransientParametersState(
+                self, when_upgrade="firmware_upgrade", when_done="get_params",
+            ),
+            "firmware_upgrade": DownloadState(self, when_done="wait_download_response"),
+            "wait_download_response": WaitDownloadResponseState(
+                self, when_done="wait_transfer_complete"
+            ),
+            "wait_transfer_complete": WaitInformTransferCompleteState(
+                self,
+                when_done="get_params",
+                when_periodic="wait_transfer_complete",
+                when_timeout="end_session",
+            ),
+            "get_params": SercommGetObjectParametersState(
+                self,
+                when_delete="delete_objs",
+                when_add="add_objs",
+                when_set="set_params",
+                when_skip="check_status",
+            ),
+            "delete_objs": DeleteObjectsState(
+                self, when_add="add_objs", when_skip="set_params",
+            ),
+            "add_objs": AddObjectsState(self, when_done="set_params"),
+            "set_params": SetParameterValuesState(self, when_done="wait_set_params",),
+            "wait_set_params": WaitSetParameterValuesState(
+                self,
+                when_done="check_get_params",
+                when_apply_invasive="check_get_params",
+                status_non_zero_allowed=True,
+            ),
+            "check_get_params": GetParametersState(
+                self, when_done="check_wait_get_params", request_all_params=True,
+            ),
+            "check_wait_get_params": WaitGetParametersState(
+                self, when_done="check_status",
+            ),
+            "check_status": CheckStatusState(self, when_done="check_status"),
+            "end_session": EndSessionState(self),
+            # These states are only entered through manual user intervention
+            "reboot": EnbSendRebootState(self, when_done="wait_reboot"),
+            "wait_reboot": WaitRebootResponseState(
+                self, when_done="wait_post_reboot_inform",
+            ),
+            "wait_post_reboot_inform": WaitInformMRebootState(
+                self, when_done="wait_empty", when_timeout="wait_inform",
+            ),
+            # The states below are entered when an unexpected message type is
+            # received
+            "unexpected_fault": ErrorState(
+                self, inform_transition_target="wait_inform",
+            ),
+        }
+
+    @property
+    def device_name(self) -> str:
+        return EnodebDeviceName.SERCOMM
+
+    @property
+    def data_model_class(self) -> Type[DataModel]:
+        return SercommTrDataModel
+
+    @property
+    def config_postprocessor(self) -> EnodebConfigurationPostProcessor:
+        return SercommConfigurationInitializer(self)
+
+    @property
+    def state_map(self) -> Dict[str, EnodebAcsState]:
+        return self._state_map
+
+    @property
+    def disconnected_state_name(self) -> str:
+        return "wait_inform"
+
+    @property
+    def unexpected_fault_state_name(self) -> str:
+        return "unexpected_fault"
+
+
+class SASParameters:
+    """ Class modeling the SAS parameters and their TR path"""
+
+    # For CBRS radios we set this to the limit and the SAS can reduce the
+    # power if needed.
+
+    SAS_PARAMETERS = {
+        ParameterName.SAS_ENABLE: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.Enable",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.SAS_SERVER_URL: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.Server",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_UID: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.UserContactInformation",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_CATEGORY: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.Category",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_CHANNEL_TYPE: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.ProtectionLevel",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_CERT_SUBJECT: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.CertSubject",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        # SAS_IC_GROUP_ID: TrParam(
+        #     FAP_CONTROL + 'LTE.X_SCM_SAS.ICGGroupId', is_invasive=False,
+        #     type=TrParameterType.STRING, False),
+        ParameterName.SAS_LOCATION: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.Location",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_HEIGHT_TYPE: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.HeightType",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_CPI_ENABLE: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.CPIEnable",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.SAS_CPI_IPE: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.CPIInstallParamSuppliedEnable",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.SAS_FCCID: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.FCCIdentificationNumber",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_MEAS_CAPS: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.MeasCapability",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_MANU_ENABLE: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.ManufacturerPrefixEnable",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.SAS_CPI_NAME: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.CPIName",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_CPI_ID: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.CPIId",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SAS_ANTA_AZIMUTH: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.AntennaAzimuth",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.SAS_ANTA_DOWNTILT: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.AntennaDowntilt",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.SAS_ANTA_GAIN: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.AntennaGain",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.SAS_ANTA_BEAMWIDTH: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.AntennaBeamwidth",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.SAS_CPI_DATA: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_SAS.CPISignatureData",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+    }
+
+
+class StatusParameters:
+    """
+    Stateful class that converts eNB status to Magma understood status.
+    Sercomm has many status params that interact with each other.
+    This class maintains the business logic of parsing these status params
+    and converting it to Magma understood fields.
+    """
+
+    # Status parameters
+    DEFAULT_GW = "defaultGW"
+    SYNC_STATUS = "syncStatus"
+    SAS_STATUS = "sasStatus"
+    ENB_STATUS = "enbStatus"
+    GPS_SCAN_STATUS = "gpsScanStatus"
+
+    STATUS_PARAMETERS = {
+        # Status nodes
+        DEFAULT_GW: TrParam(
+            "Device.X_SCM_DeviceFeature.X_SCM_NEStatus.X_SCM_DEFGW_Status",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        SAS_STATUS: TrParam(
+            "Device.Services.FAPService.1.FAPControl.LTE.X_SCM_SAS.State",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        GPS_SCAN_STATUS: TrParam(
+            "Device.FAP.GPS.ScanStatus",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.GPS_LAT: TrParam(
+            "Device.FAP.GPS.LockedLatitude",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.GPS_LONG: TrParam(
+            "Device.FAP.GPS.LockedLongitude",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SW_VERSION: TrParam(
+            "Device.DeviceInfo.SoftwareVersion",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SERIAL_NUMBER: TrParam(
+            "Device.DeviceInfo.SerialNumber",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+    }
+
+    # Derived status params that don't have tr69 representation.
+    DERIVED_STATUS_PARAMETERS = {
+        ParameterName.RF_TX_STATUS: TrParam(
+            "Device.X_SCM_DeviceFeature.SystemParams.RunControl.Service.4.Status",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.GPS_STATUS: TrParam(
+            "Device.FAP.GPS.ScanStatus",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.PTP_STATUS: TrParam(
+            InvalidTrParamPath,
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.MME_STATUS: TrParam(
+            InvalidTrParamPath,  # FAP_CONTROL + "LTE.X_SCM_S1State",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.OP_STATE: TrParam(
+            "Device.X_SCM_DeviceFeature.SystemParams.RunControl.Service.4.Status",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+    }
+
+    @classmethod
+    def set_magma_device_cfg(
+        cls, name_to_val: Dict, device_cfg: EnodebConfiguration,
+    ):
+        """
+        Convert Sercomm name_to_val representation to magma device_cfg
+        """
+        success_str = "SUCCESS"  # String constant returned by radio
+        insync_str = "INSYNC"
+
+        if (
+            name_to_val.get(cls.DEFAULT_GW)
+            and name_to_val[cls.DEFAULT_GW].upper() != success_str
+        ):
+            # Nothing will proceed if the eNB doesn't have an IP on the WAN
+            serial_num = "unknown"
+            if device_cfg.has_parameter(ParameterName.SERIAL_NUMBER):
+                serial_num = device_cfg.get_parameter(ParameterName.SERIAL_NUMBER,)
+            EnodebdLogger.error(
+                "Radio with serial number %s doesn't have IP address " "on WAN",
+                serial_num,
+            )
+            device_cfg.set_parameter(
+                param_name=ParameterName.RF_TX_STATUS, value=False,
+            )
+            device_cfg.set_parameter(
+                param_name=ParameterName.GPS_STATUS, value=False,
+            )
+            device_cfg.set_parameter(
+                param_name=ParameterName.PTP_STATUS, value=False,
+            )
+            device_cfg.set_parameter(
+                param_name=ParameterName.MME_STATUS, value=False,
+            )
+            device_cfg.set_parameter(
+                param_name=ParameterName.OP_STATE, value=False,
+            )
+            return
+
+        if (
+            name_to_val.get(cls.SAS_STATUS)
+            and name_to_val[cls.SAS_STATUS].upper() == success_str
+        ):
+            device_cfg.set_parameter(
+                param_name=ParameterName.RF_TX_STATUS, value=True,
+            )
+        else:
+            # No sas grant so not transmitting. There is no explicit node for Tx
+            # in Sercomm
+            device_cfg.set_parameter(
+                param_name=ParameterName.RF_TX_STATUS, value=False,
+            )
+
+        if (
+            name_to_val.get(cls.GPS_SCAN_STATUS)
+            and name_to_val[cls.GPS_SCAN_STATUS].upper() == success_str
+        ):
+            device_cfg.set_parameter(
+                param_name=ParameterName.GPS_STATUS, value=True,
+            )
+            # Time comes through GPS so can only be insync with GPS is
+            # in sync, we use PTP_STATUS field to overload timer is in Sync.
+            if (
+                name_to_val.get(cls.SYNC_STATUS)
+                and name_to_val[cls.SYNC_STATUS].upper() == insync_str
+            ):
+                device_cfg.set_parameter(
+                    param_name=ParameterName.PTP_STATUS, value=True,
+                )
+            else:
+                device_cfg.set_parameter(
+                    param_name=ParameterName.PTP_STATUS, value=False,
+                )
+        else:
+            device_cfg.set_parameter(
+                param_name=ParameterName.GPS_STATUS, value=False,
+            )
+            device_cfg.set_parameter(
+                param_name=ParameterName.PTP_STATUS, value=False,
+            )
+
+        if (
+            name_to_val.get(cls.DEFAULT_GW)
+            and name_to_val[cls.DEFAULT_GW].upper() == success_str
+        ):
+            device_cfg.set_parameter(
+                param_name=ParameterName.MME_STATUS, value=True,
+            )
+        else:
+            device_cfg.set_parameter(
+                param_name=ParameterName.MME_STATUS, value=False,
+            )
+
+        if (
+            name_to_val.get(cls.ENB_STATUS)
+            and name_to_val[cls.ENB_STATUS].upper() == success_str
+        ):
+            device_cfg.set_parameter(
+                param_name=ParameterName.OP_STATE, value=True,
+            )
+        else:
+            device_cfg.set_parameter(
+                param_name=ParameterName.OP_STATE, value=False,
+            )
+
+        pass_through_params = [ParameterName.GPS_LAT, ParameterName.GPS_LONG]
+
+        print(name_to_val)
+        for name in pass_through_params:
+            device_cfg.set_parameter(name, name_to_val[name])
+
+
+class SercommMiscParameters:
+    """
+    Default set of parameters that enable carrier aggregation and other
+    miscellaneous properties
+    """
+
+    MISC_PARAMETERS = {
+        ParameterName.CARRIER_AGG_ENABLE: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_RRMConfig.X_SCM_CA_Enable",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.CARRIER_NUMBER: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_RRMConfig.X_SCM_Cell_Number",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.CONTIGUOUS_CC: TrParam(
+            FAP_CONTROL + "LTE.X_SCM_RRMConfig.X_SCM_CELL_Freq_Contiguous",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.PRIM_SOURCE: TrParam(
+            FAPSERVICE_PATH + "REM.X_SCM_tfcsManagerConfig.primSrc",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.CWMP_ENABLE: TrParam(
+            "Device.ManagementServer.EnableCWMP",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+    }
+
+
+class SercommTrDataModel(DataModel):
+    """
+    Class to represent relevant data model parameters from TR-196/TR-098.
+    This class is effectively read-only.
+
+    These models have these idiosyncrasies (on account of running TR098):
+
+    - Parameter content root is different (InternetGatewayDevice)
+    - GetParameter queries with a wildcard e.g. InternetGatewayDevice. do
+      not respond with the full tree (we have to query all parameters)
+    - MME status is not exposed - we assume the MME is connected if
+      the eNodeB is transmitting (OpState=true)
+    - Parameters such as band capability/duplex config
+      are rooted under `boardconf.` and not the device config root
+    - Num PLMNs is not reported by these units
+    """
+
+    PARAMETERS = {
+        # Top-level objects
+        ParameterName.DEVICE: TrParam(
+            "Device.",
+            is_invasive=False,
+            type=TrParameterType.OBJECT,
+            is_optional=False,
+        ),
+        ParameterName.FAP_SERVICE: TrParam(
+            FAP_CONTROL,
+            is_invasive=False,
+            type=TrParameterType.OBJECT,
+            is_optional=False,
+        ),
+        # Device info
+        ParameterName.IP_ADDRESS: TrParam(
+            "Device.IP.Interface.1.IPv4Address.1.IPAddress",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        # RF-related parameters
+        ParameterName.FREQ_BAND_1: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.FreqBandIndicator",
+            is_invasive=False,
+            type=TrParameterType.UNSIGNED_INT,
+            is_optional=False,
+        ),
+        ParameterName.FREQ_BAND_2: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.X_SCM_FreqBandIndicator2",
+            is_invasive=False,
+            type=TrParameterType.UNSIGNED_INT,
+            is_optional=False,
+        ),
+        ParameterName.FREQ_BAND_LIST: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.X_SCM_FreqBandIndicatorConfigList",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.EARFCNDL: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.EARFCNDL",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.EARFCNUL: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.EARFCNUL",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.EARFCNDL2: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.X_SCM_EARFCNDL2",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.EARFCNUL2: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.X_SCM_EARFCNUL2",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.EARFCNDL_LIST: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.X_SCM_EARFCNDLConfigList",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.EARFCNUL_LIST: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.X_SCM_EARFCNULConfigList",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.DL_BANDWIDTH: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.DLBandwidth",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.UL_BANDWIDTH: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.ULBandwidth",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.PCI: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.PhyCellID",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.SUBFRAME_ASSIGNMENT: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.PHY.TDDFrame.SubFrameAssignment",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.SPECIAL_SUBFRAME_PATTERN: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.PHY.TDDFrame.SpecialSubframePatterns",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.CELL_ENABLE64QAM: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.PHY.PUSCH.Enable64QAM",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.CELL_ID: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.Common.CellIdentity",
+            is_invasive=False,
+            type=TrParameterType.UNSIGNED_INT,
+            is_optional=False,
+        ),
+        # Readonly LTE state
+        ParameterName.ADMIN_STATE: TrParam(
+            FAP_CONTROL + "LTE.AdminState",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.GPS_ENABLE: TrParam(
+            "Device.FAP.GPS.ScanOnBoot",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        # Core network parameters
+        ParameterName.MME_IP: TrParam(
+            FAP_CONTROL + "LTE.Gateway.S1SigLinkServerList",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.MME_PORT: TrParam(
+            FAP_CONTROL + "LTE.Gateway.S1SigLinkPort",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.TAC: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.EPC.TAC",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.TAC2: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.EPC.X_SCM_TAC2",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        # Management server parameters
+        ParameterName.PERIODIC_INFORM_ENABLE: TrParam(
+            "Device.ManagementServer.PeriodicInformEnable",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.PERIODIC_INFORM_INTERVAL: TrParam(
+            "Device.ManagementServer.PeriodicInformInterval",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        # Performance management parameters
+        ParameterName.PERF_MGMT_ENABLE: TrParam(
+            "Device.FAP.PerfMgmt.Config.1.Enable",
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        ),
+        ParameterName.PERF_MGMT_UPLOAD_INTERVAL: TrParam(
+            "Device.FAP.PerfMgmt.Config.1.PeriodicUploadInterval",
+            is_invasive=False,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.PERF_MGMT_UPLOAD_URL: TrParam(
+            "Device.FAP.PerfMgmt.Config.1.URL",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+        ParameterName.TX_POWER: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.RAN.RF.X_SCM_TxPowerConfig",
+            is_invasive=True,
+            type=TrParameterType.INT,
+            is_optional=False,
+        ),
+        ParameterName.TUNNEL_TYPE: TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.Tunnel.1.TunnelRef",
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        ),
+    }
+    TRANSFORMS_FOR_ENB = {}
+    NUM_PLMNS_IN_CONFIG = 1
+    for i in range(1, NUM_PLMNS_IN_CONFIG + 1):
+        PARAMETERS[ParameterName.PLMN_N % i] = TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.EPC.PLMNList.%d." % i,
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        )
+        PARAMETERS[ParameterName.PLMN_N_CELL_RESERVED % i] = TrParam(
+            FAPSERVICE_PATH
+            + "CellConfig.LTE.EPC.PLMNList.%d.CellReservedForOperatorUse" % i,
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        )
+        PARAMETERS[ParameterName.PLMN_N_ENABLE % i] = TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.EPC.PLMNList.%d.Enable" % i,
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        )
+        PARAMETERS[ParameterName.PLMN_N_PRIMARY % i] = TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.EPC.PLMNList.%d.IsPrimary" % i,
+            is_invasive=False,
+            type=TrParameterType.BOOLEAN,
+            is_optional=False,
+        )
+        PARAMETERS[ParameterName.PLMN_N_PLMNID % i] = TrParam(
+            FAPSERVICE_PATH + "CellConfig.LTE.EPC.PLMNList.%d.PLMNID" % i,
+            is_invasive=False,
+            type=TrParameterType.STRING,
+            is_optional=False,
+        )
+
+    PARAMETERS.update(SASParameters.SAS_PARAMETERS)
+    PARAMETERS.update(SercommMiscParameters.MISC_PARAMETERS)
+    PARAMETERS.update(StatusParameters.STATUS_PARAMETERS)
+    PARAMETERS.update(StatusParameters.DERIVED_STATUS_PARAMETERS)
+
+    TRANSFORMS_FOR_MAGMA = {
+        # We don't set these parameters
+        ParameterName.BAND_CAPABILITY: transform_for_magma.band_capability,
+        ParameterName.DUPLEX_MODE_CAPABILITY: transform_for_magma.duplex_mode,
+    }
+
+    @classmethod
+    def get_parameter(cls, param_name: ParameterName) -> Optional[TrParam]:
+        return cls.PARAMETERS.get(param_name)
+
+    @classmethod
+    def _get_magma_transforms(cls,) -> Dict[ParameterName, Callable[[Any], Any]]:
+        return cls.TRANSFORMS_FOR_MAGMA
+
+    @classmethod
+    def _get_enb_transforms(cls) -> Dict[ParameterName, Callable[[Any], Any]]:
+        return cls.TRANSFORMS_FOR_ENB
+
+    @classmethod
+    def get_load_parameters(cls) -> List[ParameterName]:
+        """
+        Load all the parameters instead of a subset.
+        """
+        return list(cls.PARAMETERS.keys())
+
+    @classmethod
+    def get_num_plmns(cls) -> int:
+        return cls.NUM_PLMNS_IN_CONFIG
+
+    @classmethod
+    def get_parameter_names(cls) -> List[ParameterName]:
+        excluded_params = [
+            str(ParameterName.DEVICE),
+            str(ParameterName.FAP_SERVICE),
+        ]
+        names = list(
+            filter(
+                lambda x: (not str(x).startswith("PLMN"))
+                and (str(x) not in excluded_params),
+                cls.PARAMETERS.keys(),
+            ),
+        )
+        return names
+
+    @classmethod
+    def get_numbered_param_names(cls,) -> Dict[ParameterName, List[ParameterName]]:
+        names = {}
+        for i in range(1, cls.NUM_PLMNS_IN_CONFIG + 1):
+            params = [
+                ParameterName.PLMN_N_CELL_RESERVED % i,
+                ParameterName.PLMN_N_ENABLE % i,
+                ParameterName.PLMN_N_PRIMARY % i,
+                ParameterName.PLMN_N_PLMNID % i,
+            ]
+            names[ParameterName.PLMN_N % i] = params
+
+        return names
+
+    @classmethod
+    def get_sas_param_names(cls) -> List[ParameterName]:
+        return SASParameters.SAS_PARAMETERS.keys()
+
+
+class SercommConfigurationInitializer(EnodebConfigurationPostProcessor):
+    """
+    Class to add the sas related parameters to the desired config.
+    """
+
+    SAS_KEY = "sas"
+
+    def __init__(self, acs: EnodebAcsStateMachine):
+        super().__init__()
+        self.acs = acs
+
+    def postprocess(
+        self, mconfig: Any, service_cfg: Any, desired_cfg: EnodebConfiguration,
+    ) -> None:
+        # Bump up the parameter key version
+        self.acs.parameter_version_inc()
+
+        # Load eNB customized configuration from "./magma_config/serial_number/"
+        # and configure each connected eNB based on serial number
+        enbcfg = load_enb_config()
+        sn = self.acs.get_parameter(ParameterName.SERIAL_NUMBER)
+
+        for name, val in enbcfg.get(sn, {}).items():
+            if desired_cfg.has_parameter(name):
+                desired_cfg.set_parameter(name, val)
+                print("Config %s updated to: %s" % (name, val))
+
+        print(desired_cfg)
+
+
+class SercommSendGetTransientParametersState(EnodebAcsState):
+    """
+    Periodically read eNodeB status. Note: keep frequency low to avoid
+    backing up large numbers of read operations if enodebd is busy.
+    Some eNB parameters are read only and updated by the eNB itself.
+    """
+
+    def __init__(self, acs: EnodebAcsStateMachine, when_upgrade: str, when_done: str):
+        super().__init__()
+        self.acs = acs
+        self.upgrade_transition = when_upgrade
+        self.done_transition = when_done
+
+    def get_msg(self, message: Any) -> AcsMsgAndTransition:
+
+        request = models.GetParameterValues()
+        request.ParameterNames = models.ParameterNames()
+        request.ParameterNames.string = []
+
+        for _, tr_param in StatusParameters.STATUS_PARAMETERS.items():
+            path = tr_param.path
+            request.ParameterNames.string.append(path)
+
+        request.ParameterNames.string.append(
+            "Device.X_SCM_DeviceFeature.SystemParams.RunControl.Service.4.Status",
+        )
+
+        request.ParameterNames.arrayType = "xsd:string[%d]" % len(
+            request.ParameterNames.string
+        )
+
+        return AcsMsgAndTransition(msg=request, next_state=None)
+
+    def read_msg(self, message: Any) -> AcsReadMsgResult:
+
+        name_to_val = parse_get_parameter_values_response(self.acs.data_model, message,)
+
+        # Update device configuration
+        StatusParameters.set_magma_device_cfg(
+            name_to_val, self.acs.device_cfg,
+        )
+
+        if name_to_val["SW version"] != "RC3923@2202151120":
+            print("Get into Firmware Upgrade state")
+            return AcsReadMsgResult(
+                msg_handled=True, next_state=self.upgrade_transition
+            )
+
+        print("Skip firmware upgrade, configure the enb")
+        return AcsReadMsgResult(msg_handled=True, next_state=self.done_transition)
+
+    def state_description(self) -> str:
+        return "Getting transient read-only parameters"
+
+
+class SercommGetInitState(EnodebAcsState):
+    """
+    After the first Inform message the following can happen:
+    1 - eNB can try to learn the RPC method of the ACS, reply back with the
+    RPC response (happens right after boot)
+    2 - eNB can send an empty message -> This means that the eNB is already
+    provisioned so transition to next state. Only transition to next state
+    after this message.
+    3 - Some other method call that we don't care about so ignore.
+    expected that the eNB -> This is an unhandled state so unlikely
+    """
+
+    def __init__(self, acs: EnodebAcsStateMachine, when_done):
+        super().__init__()
+        self.acs = acs
+        self.done_transition = when_done
+        self._is_rpc_request = False
+
+    def get_msg(self, message: Any) -> AcsMsgAndTransition:
+        """
+        Return empty message response if care about this
+        message type otherwise return empty RPC methods response.
+        """
+        if not self._is_rpc_request:
+            resp = models.DummyInput()
+            return AcsMsgAndTransition(msg=resp, next_state=None)
+
+        resp = models.GetRPCMethodsResponse()
+        resp.MethodList = models.MethodList()
+        RPC_METHODS = ["Inform", "GetRPCMethods", "TransferComplete"]
+        resp.MethodList.arrayType = "xsd:string[%d]" % len(RPC_METHODS)
+        resp.MethodList.string = RPC_METHODS
+        # Don't transition to next state wait for the empty HTTP post
+        return AcsMsgAndTransition(msg=resp, next_state=None)
+
+    def read_msg(self, message: Any) -> AcsReadMsgResult:
+        # If this is a regular Inform, not after a reboot we'll get an empty
+        # message, in this case transition to the next state. We consider
+        # this phase as "initialized"
+        if isinstance(message, models.DummyInput):
+            return AcsReadMsgResult(msg_handled=True, next_state=self.done_transition,)
+        if not isinstance(message, models.GetRPCMethods):
+            # Unexpected, just don't die, ignore message.
+            logging.error("Ignoring message %s", str(type(message)))
+            # Set this so get_msg will return an empty message
+            self._is_rpc_request = False
+        else:
+            # Return a valid RPC response
+            self._is_rpc_request = True
+        return AcsReadMsgResult(msg_handled=True, next_state=None)
+
+    def state_description(self) -> str:
+        return "Initializing the post boot sequence for eNB"
+
+
+class SercommGetObjectParametersState(EnodebAcsState):
+    """
+    Get information on parameters belonging to objects that can be added or
+    removed from the configuration.
+
+    Englewood will report a parameter value as None if it does not exist
+    in the data model, rather than replying with a Fault message like most
+    eNB devices.
+    """
+
+    def __init__(
+        self,
+        acs: EnodebAcsStateMachine,
+        when_delete: str,
+        when_add: str,
+        when_set: str,
+        when_skip: str,
+    ):
+        super().__init__()
+        self.acs = acs
+        self.rm_obj_transition = when_delete
+        self.add_obj_transition = when_add
+        self.set_params_transition = when_set
+        self.skip_transition = when_skip
+
+    def get_params_to_get(self, data_model: DataModel,) -> List[ParameterName]:
+        names = []
+
+        # First get base params
+        names = get_params_to_get(
+            self.acs.device_cfg, self.acs.data_model, request_all_params=True,
+        )
+        # Add object params.
+        num_plmns = data_model.get_num_plmns()
+        obj_to_params = data_model.get_numbered_param_names()
+        for i in range(1, num_plmns + 1):
+            obj_name = ParameterName.PLMN_N % i
+            desired = obj_to_params[obj_name]
+            names += desired
+
+        print(obj_to_params)
+        return names
+
+    def get_msg(self, message: Any) -> AcsMsgAndTransition:
+        """ Respond with GetParameterValuesRequest """
+        names = self.get_params_to_get(self.acs.data_model,)
+
+        # Generate the request
+        request = models.GetParameterValues()
+        request.ParameterNames = models.ParameterNames()
+        request.ParameterNames.arrayType = "xsd:string[%d]" % len(names)
+        request.ParameterNames.string = []
+        for name in names:
+            path = self.acs.data_model.get_parameter(name).path
+            if path is not InvalidTrParamPath:
+                # Only get data elements backed by tr69 path
+                request.ParameterNames.string.append(path)
+
+        return AcsMsgAndTransition(msg=request, next_state=None)
+
+    def read_msg(self, message: Any) -> AcsReadMsgResult:
+        """
+        Process GetParameterValuesResponse
+        """
+        if not isinstance(message, models.GetParameterValuesResponse):
+            return AcsReadMsgResult(msg_handled=False, next_state=None)
+
+        path_to_val = {}
+        for param_value_struct in message.ParameterList.ParameterValueStruct:
+            path_to_val[param_value_struct.Name] = param_value_struct.Value.Data
+
+        EnodebdLogger.debug("Received object parameters: %s", str(path_to_val))
+
+        # Parse simple params
+        param_name_list = self.acs.data_model.get_parameter_names()
+
+        for name in param_name_list:
+            path = self.acs.data_model.get_parameter(name).path
+            if path in path_to_val:
+                value = path_to_val.get(path)
+                magma_val = self.acs.data_model.transform_for_magma(name, value,)
+                self.acs.device_cfg.set_parameter(name, magma_val)
+
+        # Parse object params
+        num_plmns = self.acs.data_model.get_num_plmns()
+        for i in range(1, num_plmns + 1):
+            obj_name = ParameterName.PLMN_N % i
+            obj_to_params = self.acs.data_model.get_numbered_param_names()
+            param_name_list = obj_to_params[obj_name]
+            for name in param_name_list:
+                path = self.acs.data_model.get_parameter(name).path
+                if path in path_to_val:
+                    value = path_to_val.get(path)
+                    if value is None:
+                        continue
+                    if obj_name not in self.acs.device_cfg.get_object_names():
+                        self.acs.device_cfg.add_object(obj_name)
+                    magma_value = self.acs.data_model.transform_for_magma(name, value)
+                    self.acs.device_cfg.set_parameter_for_object(
+                        name, magma_value, obj_name,
+                    )
+
+        # Now we have enough information to build the desired configuration
+        if self.acs.desired_cfg is None:
+            self.acs.desired_cfg = build_desired_config(
+                self.acs.mconfig,
+                self.acs.service_config,
+                self.acs.device_cfg,
+                self.acs.data_model,
+                self.acs.config_postprocessor,
+            )
+
+        if (
+            len(get_all_objects_to_delete(self.acs.desired_cfg, self.acs.device_cfg,),)
+            > 0
+        ):
+            return AcsReadMsgResult(
+                msg_handled=True, next_state=self.rm_obj_transition,
+            )
+        elif (
+            len(get_all_objects_to_add(self.acs.desired_cfg, self.acs.device_cfg,),) > 0
+        ):
+            return AcsReadMsgResult(
+                msg_handled=True, next_state=self.add_obj_transition,
+            )
+        elif (
+            len(
+                get_all_param_values_to_set(
+                    self.acs.desired_cfg, self.acs.device_cfg, self.acs.data_model,
+                ),
+            )
+            > 0
+        ):
+            return AcsReadMsgResult(
+                msg_handled=True, next_state=self.set_params_transition,
+            )
+        return AcsReadMsgResult(msg_handled=True, next_state=self.skip_transition,)
+
+    def state_description(self) -> str:
+        return "Getting well known parameters"