diff --git a/ofdpa/flows.py b/ofdpa/flows.py
index 98d0ac8..ad6a190 100755
--- a/ofdpa/flows.py
+++ b/ofdpa/flows.py
@@ -13,6 +13,7 @@
 11) L3VPNMPLS
 12) MPLS Termination
 """
+import Queue
 
 from oftest import config
 import inspect
@@ -22,43 +23,67 @@
 from oftest.testutils import *
 from accton_util import *
 
+
 class PacketInUDP(base_tests.SimpleDataPlane):
     """
-    Test packet in function for a table-miss flow
-    Send a packet to each dataplane port and verify that a packet
-    in message is received from the controller for each
-    
-    NOTE: Verify This case the oft option shall not use --switch-ip
+    Verify a ACL rule that matches on IP_PROTO 2 will not match a UDP packet.
+    Next it verify a rule that matches on IP_PROTO 17 WILL match a UDP packet.
     """
 
     def runTest(self):
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
-        
-        parsed_vlan_pkt = simple_udp_packet(pktlen=104, 
-                      vlan_vid=0x1001, dl_vlan_enable=True)
+        parsed_vlan_pkt = simple_udp_packet(pktlen=104,
+                                            vlan_vid=0x1001,
+                                            dl_vlan_enable=True)
         vlan_pkt = str(parsed_vlan_pkt)
         # create match
         match = ofp.match()
         match.oxm_list.append(ofp.oxm.eth_type(0x0800))
-        match.oxm_list.append(ofp.oxm.ip_proto(17))
+        match.oxm_list.append(ofp.oxm.ip_proto(2))
         request = ofp.message.flow_add(
-            table_id=60,
-            cookie=42,
-            match=match,
-            instructions=[
-                ofp.instruction.apply_actions(
-                    actions=[
-                        ofp.action.output(
-                            port=ofp.OFPP_CONTROLLER,
-                            max_len=ofp.OFPCML_NO_BUFFER)]),            ],
-            buffer_id=ofp.OFP_NO_BUFFER,
-            priority=1)
+                table_id=60,
+                cookie=42,
+                match=match,
+                instructions=[
+                    ofp.instruction.apply_actions(
+                            actions=[
+                                ofp.action.output(
+                                        port=ofp.OFPP_CONTROLLER,
+                                        max_len=ofp.OFPCML_NO_BUFFER)]), ],
+                buffer_id=ofp.OFP_NO_BUFFER,
+                priority=1)
+        logging.info("Inserting packet in flow to controller")
+        self.controller.message_send(request)
+
+        for of_port in config["port_map"].keys():
+            logging.info("PacketInMiss test, port %d", of_port)
+            self.dataplane.send(of_port, vlan_pkt)
+
+            verify_no_packet_in(self, vlan_pkt, of_port, ofp.OFPR_ACTION)
 
         logging.info("Inserting packet in flow to controller")
         self.controller.message_send(request)
         do_barrier(self.controller)
 
+        delete_all_flows(self.controller)
+
+        match = ofp.match()
+        match.oxm_list.append(ofp.oxm.eth_type(0x0800))
+        match.oxm_list.append(ofp.oxm.ip_proto(17))
+        request = ofp.message.flow_add(
+                table_id=60,
+                cookie=42,
+                match=match,
+                instructions=[
+                    ofp.instruction.apply_actions(
+                            actions=[
+                                ofp.action.output(
+                                        port=ofp.OFPP_CONTROLLER,
+                                        max_len=ofp.OFPCML_NO_BUFFER)]), ],
+                buffer_id=ofp.OFP_NO_BUFFER,
+                priority=1)
+        logging.info("Inserting packet in flow to controller")
+        self.controller.message_send(request)
+
         for of_port in config["port_map"].keys():
             logging.info("PacketInMiss test, port %d", of_port)
             self.dataplane.send(of_port, vlan_pkt)
@@ -67,10 +92,12 @@
 
             verify_no_other_packets(self)
 
+        delete_all_flows(self.controller)
+
 
 @disabled
 class ArpNL2(base_tests.SimpleDataPlane):
-     def runTest(self):
+    def runTest(self):
         delete_all_flows(self.controller)
         delete_all_groups(self.controller)
 
@@ -78,24 +105,27 @@
         match = ofp.match()
         match.oxm_list.append(ofp.oxm.eth_type(0x0806))
         request = ofp.message.flow_add(
-            table_id=60,
-            cookie=42,
-            match=match,
-            instructions=[
-                ofp.instruction.apply_actions(
-                    actions=[
-                        ofp.action.output(
-                            port=ofp.OFPP_CONTROLLER,
-                            max_len=ofp.OFPCML_NO_BUFFER)]),
-            ],
-            buffer_id=ofp.OFP_NO_BUFFER,
-            priority=40000)
+                table_id=60,
+                cookie=42,
+                match=match,
+                instructions=[
+                    ofp.instruction.apply_actions(
+                            actions=[
+                                ofp.action.output(
+                                        port=ofp.OFPP_CONTROLLER,
+                                        max_len=ofp.OFPCML_NO_BUFFER)]),
+                ],
+                buffer_id=ofp.OFP_NO_BUFFER,
+                priority=40000)
         self.controller.message_send(request)
         for port in ports:
             add_one_l2_interface_group(self.controller, port, 1, False, False)
-            add_one_vlan_table_flow(self.controller, port, 1, flag=VLAN_TABLE_FLAG_ONLY_BOTH)
+            add_one_vlan_table_flow(self.controller, port, 1,
+                                    flag=VLAN_TABLE_FLAG_ONLY_BOTH)
             group_id = encode_l2_interface_group_id(1, port)
-            add_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, port], 1, group_id, True)
+            add_bridge_flow(self.controller,
+                            [0x00, 0x12, 0x34, 0x56, 0x78, port], 1, group_id,
+                            True)
         do_barrier(self.controller)
         parsed_arp_pkt = simple_arp_packet()
         arp_pkt = str(parsed_arp_pkt)
@@ -104,12 +134,12 @@
             self.dataplane.send(out_port, arp_pkt)
             verify_packet_in(self, arp_pkt, out_port, ofp.OFPR_ACTION)
             # change dest based on port number
-            mac_dst= '00:12:34:56:78:%02X' % out_port
+            mac_dst = '00:12:34:56:78:%02X' % out_port
             for in_port in ports:
                 if in_port == out_port:
                     continue
                 # change source based on port number to avoid packet-ins from learning
-                mac_src= '00:12:34:56:78:%02X' % in_port
+                mac_src = '00:12:34:56:78:%02X' % in_port
                 parsed_pkt = simple_tcp_packet(eth_dst=mac_dst, eth_src=mac_src)
                 pkt = str(parsed_pkt)
                 self.dataplane.send(in_port, pkt)
@@ -122,42 +152,31 @@
 
                 verify_no_other_packets(self)
 
+
 class PacketInArp(base_tests.SimpleDataPlane):
     """
-    Test packet in function for a table-miss flow
-    Send a packet to each dataplane port and verify that a packet
-    in message is received from the controller for each
-
-    NOTE: Verify This case the oft option shall not use --switch-ip
+    Verify an ACL rule matching on ethertyper 0x806 will result in a packet-in
     """
 
     def runTest(self):
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
-
         parsed_arp_pkt = simple_arp_packet()
         arp_pkt = str(parsed_arp_pkt)
-        ports = sorted(config["port_map"].keys())
-        #for port in ports:
-        #    add_one_l2_interface_group(self.controller, port, 1, True, False)
-        #    add_one_vlan_table_flow(self.controller, port, 1, flag=VLAN_TABLE_FLAG_ONLY_TAG)
-
         # create match
         match = ofp.match()
         match.oxm_list.append(ofp.oxm.eth_type(0x0806))
         request = ofp.message.flow_add(
-            table_id=60,
-            cookie=42,
-            match=match,
-            instructions=[
-                ofp.instruction.apply_actions(
-                    actions=[
-                        ofp.action.output(
-                            port=ofp.OFPP_CONTROLLER,
-                            max_len=ofp.OFPCML_NO_BUFFER)]),
-            ],
-            buffer_id=ofp.OFP_NO_BUFFER,
-            priority=1)
+                table_id=60,
+                cookie=42,
+                match=match,
+                instructions=[
+                    ofp.instruction.apply_actions(
+                            actions=[
+                                ofp.action.output(
+                                        port=ofp.OFPP_CONTROLLER,
+                                        max_len=ofp.OFPCML_NO_BUFFER)]),
+                ],
+                buffer_id=ofp.OFP_NO_BUFFER,
+                priority=1)
 
         logging.info("Inserting packet in flow to controller")
         self.controller.message_send(request)
@@ -170,44 +189,54 @@
             verify_packet_in(self, arp_pkt, of_port, ofp.OFPR_ACTION)
 
             verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+
 
 class L2FloodQinQ(base_tests.SimpleDataPlane):
     """
-    Test L2 flood of double tagged vlan packets (802.1Q)
-    Sends a double tagged packet and verifies flooding behavior according to outer vlan
+    Verify a tagged frame can be flooded based on its outer vlan
     """
+
     def runTest(self):
         ports = sorted(config["port_map"].keys())
-        #Hashes Test Name and uses it as id for installing unique groups
-        vlan_id=abs(hash(inspect.stack()[0][3])) % (256)
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
+        vlan_id = 1
 
-        # Installing flows to avoid packet-in
+        Groups = Queue.LifoQueue()
         for port in ports:
-            add_one_l2_interface_group(self.controller, port, vlan_id, True, False)
-            add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            L2gid, l2msg = add_one_l2_interface_group(self.controller, port,
+                                                      vlan_id, True, False)
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            Groups.put(L2gid)
 
-        msg=add_l2_flood_group(self.controller, ports, vlan_id, vlan_id)
+        msg = add_l2_flood_group(self.controller, ports, vlan_id, vlan_id)
         add_bridge_flow(self.controller, None, vlan_id, msg.group_id, True)
         do_barrier(self.controller)
 
-        #verify flood
+        # verify flood
         for ofport in ports:
             # change dest based on port number
-            mac_src= '00:12:34:56:78:%02X' % ofport
-            parsed_pkt = simple_tcp_packet_two_vlan(pktlen=108, out_dl_vlan_enable=True, out_vlan_vid=vlan_id,
-                                                in_dl_vlan_enable=True, in_vlan_vid=10, eth_dst='00:12:34:56:78:9a', eth_src=mac_src)
+            mac_src = '00:12:34:56:78:%02X' % ofport
+            parsed_pkt = simple_tcp_packet_two_vlan(pktlen=108,
+                                                    out_dl_vlan_enable=True,
+                                                    out_vlan_vid=vlan_id,
+                                                    in_dl_vlan_enable=True,
+                                                    in_vlan_vid=10,
+                                                    eth_dst='00:12:34:56:78:9a',
+                                                    eth_src=mac_src)
             pkt = str(parsed_pkt)
             self.dataplane.send(ofport, pkt)
-            #self won't rx packet
+            # self won't rx packet
             verify_no_packet(self, pkt, ofport)
-            #others will rx packet
-            tmp_ports=list(ports)
+            # others will rx packet
+            tmp_ports = list(ports)
             tmp_ports.remove(ofport)
             verify_packets(self, pkt, tmp_ports)
 
         verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
 
 @disabled
 class L2FloodTagged(base_tests.SimpleDataPlane):
@@ -215,9 +244,10 @@
     Test L2 flood to a vlan
     Send a packet with unknown dst_mac and check if the packet is flooded to all ports except inport
     """
+
     def runTest(self):
-        #Hashes Test Name and uses it as id for installing unique groups
-        vlan_id=abs(hash(inspect.stack()[0][3])) % (256)
+        # Hashes Test Name and uses it as id for installing unique groups
+        vlan_id = abs(hash(inspect.stack()[0][3])) % (256)
         print vlan_id
 
         ports = sorted(config["port_map"].keys())
@@ -227,54 +257,58 @@
 
         # Installing flows to avoid packet-in
         for port in ports:
-            add_one_l2_interface_group(self.controller, port, vlan_id, True, False)
-            add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG)
-        msg=add_l2_flood_group(self.controller, ports, vlan_id, vlan_id)
+            add_one_l2_interface_group(self.controller, port, vlan_id, True,
+                                       False)
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+        msg = add_l2_flood_group(self.controller, ports, vlan_id, vlan_id)
         add_bridge_flow(self.controller, None, vlan_id, msg.group_id, True)
         do_barrier(self.controller)
 
-        #verify flood
+        # verify flood
         for ofport in ports:
             # change dest based on port number
-            pkt = str( simple_tcp_packet(dl_vlan_enable=True, vlan_vid=vlan_id, eth_dst='00:12:34:56:78:9a') )
+            pkt = str(simple_tcp_packet(dl_vlan_enable=True, vlan_vid=vlan_id,
+                                        eth_dst='00:12:34:56:78:9a'))
             self.dataplane.send(ofport, pkt)
-            #self won't rx packet
+            # self won't rx packet
             verify_no_packet(self, pkt, ofport)
-            #others will rx packet
-            tmp_ports=list(ports)
+            # others will rx packet
+            tmp_ports = list(ports)
             tmp_ports.remove(ofport)
             verify_packets(self, pkt, tmp_ports)
         verify_no_other_packets(self)
 
+
 class L2UnicastTagged(base_tests.SimpleDataPlane):
     """
-    Test output function for an exact-match flow
-
-    For each port A, adds a flow directing matching packets to that port.
-    Then, for all other ports B != A, verifies that sending a matching packet
-    to B results in an output to A.
+    Verify L2 forwarding works
     """
+
     def runTest(self):
         ports = sorted(config["port_map"].keys())
-        #Hashes Test Name and uses it as id for installing unique groups
-        vlan_id=abs(hash(inspect.stack()[0][3])) % (256)
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
-
+        vlan_id = 1;
+        Groups = Queue.LifoQueue()
         for port in ports:
-            add_one_l2_interface_group(self.controller, port, vlan_id, True, False)
-            add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG)
-            group_id = encode_l2_interface_group_id(vlan_id, port)
-            add_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, port], vlan_id, group_id, True)
+            L2gid, l2msg = add_one_l2_interface_group(self.controller, port,
+                                                      vlan_id, True, False)
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            Groups.put(L2gid)
+            add_bridge_flow(self.controller,
+                            [0x00, 0x12, 0x34, 0x56, 0x78, port], vlan_id,
+                            L2gid, True)
         do_barrier(self.controller)
 
         for out_port in ports:
             # change dest based on port number
-            mac_dst= '00:12:34:56:78:%02X' % out_port
+            mac_dst = '00:12:34:56:78:%02X' % out_port
             for in_port in ports:
                 if in_port == out_port:
                     continue
-                pkt = str( simple_tcp_packet(dl_vlan_enable=True, vlan_vid=vlan_id, eth_dst=mac_dst))
+                pkt = str(
+                        simple_tcp_packet(dl_vlan_enable=True, vlan_vid=vlan_id,
+                                          eth_dst=mac_dst))
                 self.dataplane.send(in_port, pkt)
                 for ofport in ports:
                     if ofport in [out_port]:
@@ -282,30 +316,34 @@
                     else:
                         verify_no_packet(self, pkt, ofport)
                 verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
 
 class Mtu1500(base_tests.SimpleDataPlane):
-
     def runTest(self):
         ports = sorted(config["port_map"].keys())
-        #Hashes Test Name and uses it as id for installing unique groups
-        vlan_id=abs(hash(inspect.stack()[0][3])) % (256)
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
-
+        vlan_id = 18
+        Groups = Queue.LifoQueue()
         for port in ports:
-            add_one_l2_interface_group(self.controller, port, vlan_id, True, False)
-            add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG)
-            group_id = encode_l2_interface_group_id(vlan_id, port)
-            add_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, port], vlan_id, group_id, True)
+            L2gid, msg = add_one_l2_interface_group(self.controller, port,
+                                                    vlan_id, True, False)
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            Groups.put(L2gid)
+            add_bridge_flow(self.controller,
+                            [0x00, 0x12, 0x34, 0x56, 0x78, port], vlan_id,
+                            L2gid, True)
         do_barrier(self.controller)
 
         for out_port in ports:
             # change dest based on port number
-            mac_dst= '00:12:34:56:78:%02X' % out_port
+            mac_dst = '00:12:34:56:78:%02X' % out_port
             for in_port in ports:
                 if in_port == out_port:
                     continue
-                pkt = str(simple_tcp_packet(pktlen=1500,dl_vlan_enable=True, vlan_vid=vlan_id, eth_dst=mac_dst))
+                pkt = str(simple_tcp_packet(pktlen=1500, dl_vlan_enable=True,
+                                            vlan_vid=vlan_id, eth_dst=mac_dst))
                 self.dataplane.send(in_port, pkt)
                 for ofport in ports:
                     if ofport in [out_port]:
@@ -313,322 +351,390 @@
                     else:
                         verify_no_packet(self, pkt, ofport)
                 verify_no_other_packets(self)
-
-class L3UcastTagged(base_tests.SimpleDataPlane):
-    """
-    Port1(vid=in_port, src=00:00:00:22:22:in_port, 192.168.outport.1) , 
-    Port2(vid=outport, dst=00:00:00:22:22:outport, 192.168.outport.1)
-    """
-    def runTest(self):
         delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
-        #Hashes Test Name and uses it as id for installing unique groups
-        class_id=abs(hash(inspect.stack()[0][3])) % (256)
-        if len(config["port_map"]) <2:
+        delete_groups(self.controller, Groups)
+
+
+class _32UcastTagged(base_tests.SimpleDataPlane):
+    """
+    Verify a IP forwarding works for a /32 rule to L3 Unicast Interface
+    """
+
+    def runTest(self):
+        test_id = 26
+        if len(config["port_map"]) < 2:
             logging.info("Port count less than 2, can't run this case")
             return
 
-        intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
-        dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
-        dip=0xc0a80001
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        dst_mac = [0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
+        dip = 0xc0a80001
         ports = config["port_map"].keys()
+        Groups = Queue.LifoQueue()
         for port in ports:
-            #add l2 interface group
-            vlan_id=port+class_id
-            add_one_l2_interface_group(self.controller, port, vlan_id=vlan_id, is_tagged=True, send_barrier=False)
-            dst_mac[5]=vlan_id
-            l3_msg=add_l3_unicast_group(self.controller, port, vlanid=vlan_id, id=vlan_id, src_mac=intf_src_mac, dst_mac=dst_mac)
-            #add vlan flow table
-            add_one_vlan_table_flow(self.controller, port, vlan_id,  flag=VLAN_TABLE_FLAG_ONLY_TAG)
-            #add termination flow
-            add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id)
-            #add unicast routing flow
-            dst_ip = dip + (vlan_id<<8)
-            add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffffff, l3_msg.group_id)
-            #add entries in the Bridging table to avoid packet-in from mac learning
-            group_id = encode_l2_interface_group_id(vlan_id, port)
-            add_bridge_flow(self.controller, dst_mac, vlan_id, group_id, True)
-
+            # add l2 interface group
+            vlan_id = port + test_id
+            l2gid, msg = add_one_l2_interface_group(self.controller, port,
+                                                    vlan_id=vlan_id,
+                                                    is_tagged=True,
+                                                    send_barrier=False)
+            dst_mac[5] = vlan_id
+            l3_msg = add_l3_unicast_group(self.controller, port, vlanid=vlan_id,
+                                          id=vlan_id, src_mac=intf_src_mac,
+                                          dst_mac=dst_mac)
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x0800, intf_src_mac,
+                                 vlan_id)
+            # add unicast routing flow
+            dst_ip = dip + (vlan_id << 8)
+            add_unicast_routing_flow(self.controller, 0x0800, dst_ip,
+                                     0xffffffff, l3_msg.group_id)
+            Groups.put(l2gid)
+            Groups.put(l3_msg.group_id)
         do_barrier(self.controller)
 
         switch_mac = ':'.join(['%02X' % x for x in intf_src_mac])
         for in_port in ports:
-            mac_src='00:00:00:22:22:%02X' % (class_id+in_port)
-            ip_src='192.168.%02d.1' % (class_id+in_port)
+            mac_src = '00:00:00:22:22:%02X' % (test_id + in_port)
+            ip_src = '192.168.%02d.1' % (test_id + in_port)
             for out_port in ports:
                 if in_port == out_port:
-                     continue
-                ip_dst='192.168.%02d.1' % (class_id+out_port)
-                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+in_port),
-                    eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src,
-                    ip_dst=ip_dst)
-                pkt=str(parsed_pkt)
+                    continue
+                ip_dst = '192.168.%02d.1' % (test_id + out_port)
+                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                               vlan_vid=(test_id + in_port),
+                                               eth_dst=switch_mac,
+                                               eth_src=mac_src, ip_ttl=64,
+                                               ip_src=ip_src,
+                                               ip_dst=ip_dst)
+                pkt = str(parsed_pkt)
                 self.dataplane.send(in_port, pkt)
-                #build expected packet
-                mac_dst='00:00:00:22:22:%02X' % (class_id+out_port)
-                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+out_port),
-                                       eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63,
-                                       ip_src=ip_src, ip_dst=ip_dst)
-                pkt=str(exp_pkt)
+                # build expected packet
+                mac_dst = '00:00:00:22:22:%02X' % (test_id + out_port)
+                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                            vlan_vid=(test_id + out_port),
+                                            eth_dst=mac_dst, eth_src=switch_mac,
+                                            ip_ttl=63,
+                                            ip_src=ip_src, ip_dst=ip_dst)
+                pkt = str(exp_pkt)
                 verify_packet(self, pkt, out_port)
                 verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
 
 class L3VPNMPLS(base_tests.SimpleDataPlane):
     """
 	    Insert IP packet
 	    Receive MPLS packet
     """
-    def runTest(self):
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
 
-        if len(config["port_map"]) <2:
+    def runTest(self):
+        if len(config["port_map"]) < 2:
             logging.info("Port count less than 2, can't run this case")
             return
-
-        intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
-        dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
-        dip=0xc0a80001
-        #Hashes Test Name and uses it as id for installing unique groups
-        class_id=abs(hash(inspect.stack()[0][3])) % (200)
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        dst_mac = [0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
+        dip = 0xc0a80001
+        Groups = Queue.LifoQueue()
         ports = config["port_map"].keys()
         for port in ports:
-            #add l2 interface group
-            id=port+class_id<<8
-            vlan_id=port+class_id
-            l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port, vlan_id, True, True)
-            dst_mac[5]=vlan_id
-            #add MPLS interface group
-            mpls_gid, mpls_msg = add_mpls_intf_group(self.controller, l2_gid, dst_mac, intf_src_mac, vlan_id, id)
-            #add MPLS L3 VPN group
-            mpls_label_gid, mpls_label_msg = add_mpls_label_group(self.controller, subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL,
-                index=id, ref_gid= mpls_gid, push_mpls_header=True, set_mpls_label=port, set_bos=1, set_ttl=32)
-            ecmp_msg=add_l3_ecmp_group(self.controller, id, [mpls_label_gid])
+            # add l2 interface group
+            id = port
+            vlan_id = id
+            l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port,
+                                                        vlan_id, True, True)
+            dst_mac[5] = vlan_id
+            # add MPLS interface group
+            mpls_gid, mpls_msg = add_mpls_intf_group(self.controller, l2_gid,
+                                                     dst_mac, intf_src_mac,
+                                                     vlan_id, id)
+            # add MPLS L3 VPN group
+            mpls_label_gid, mpls_label_msg = add_mpls_label_group(
+                    self.controller,
+                    subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL,
+                    index=id, ref_gid=mpls_gid, push_mpls_header=True,
+                    set_mpls_label=port, set_bos=1, set_ttl=32)
+            ecmp_msg = add_l3_ecmp_group(self.controller, id, [mpls_label_gid])
             do_barrier(self.controller)
-            #add vlan flow table
-            add_one_vlan_table_flow(self.controller, port, vlan_id, vrf=0, flag=VLAN_TABLE_FLAG_ONLY_TAG)
-            #add termination flow
-            add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id)
-            #add routing flow
-            dst_ip = dip + (vlan_id<<8)
-            #add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0, mpls_label_gid, vrf=2)
-            add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffff00, ecmp_msg.group_id, vrf=0)
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id, vrf=0,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x0800, intf_src_mac,
+                                 vlan_id)
+            # add routing flow
+            dst_ip = dip + (vlan_id << 8)
+            # add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0, mpls_label_gid, vrf=2)
+            add_unicast_routing_flow(self.controller, 0x0800, dst_ip,
+                                     0xffffff00, ecmp_msg.group_id, vrf=0)
+            Groups._put(l2_gid)
+            Groups._put(mpls_gid)
+            Groups._put(mpls_label_gid)
+            Groups._put(ecmp_msg.group_id)
 
         do_barrier(self.controller)
 
         switch_mac = ':'.join(['%02X' % x for x in intf_src_mac])
         for in_port in ports:
-            mac_src='00:00:00:22:22:%02X' % (class_id+in_port)
-            ip_src='192.168.%02d.1' % (class_id+in_port)
+            mac_src = '00:00:00:22:22:%02X' % (in_port)
+            ip_src = '192.168.%02d.1' % (in_port)
             for out_port in ports:
                 if in_port == out_port:
-                     continue
-                ip_dst='192.168.%02d.1' % (class_id+out_port)
-                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+in_port),
-                    eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src,
-                    ip_dst=ip_dst)
-                pkt=str(parsed_pkt)
+                    continue
+                ip_dst = '192.168.%02d.1' % (out_port)
+                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                               vlan_vid=(in_port),
+                                               eth_dst=switch_mac,
+                                               eth_src=mac_src, ip_ttl=64,
+                                               ip_src=ip_src,
+                                               ip_dst=ip_dst)
+                pkt = str(parsed_pkt)
                 self.dataplane.send(in_port, pkt)
-                #build expect packet
-                mac_dst='00:00:00:22:22:%02X' % (class_id+out_port)
+                # build expect packet
+                mac_dst = '00:00:00:22:22:%02X' % out_port
                 label = (out_port, 0, 1, 32)
-                exp_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=(out_port+class_id), ip_ttl=63, ip_src=ip_src,
-                            ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac, label=[label])
-                pkt=str(exp_pkt)
+                exp_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True,
+                                      vlan_vid=(out_port), ip_ttl=63,
+                                      ip_src=ip_src,
+                                      ip_dst=ip_dst, eth_dst=mac_dst,
+                                      eth_src=switch_mac, label=[label])
+                pkt = str(exp_pkt)
                 verify_packet(self, pkt, out_port)
                 verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
 
 class _32VPN(base_tests.SimpleDataPlane):
     """
             Insert IP packet
             Receive MPLS packet
     """
-    def runTest(self):
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
 
-        if len(config["port_map"]) <2:
+    def runTest(self):
+        if len(config["port_map"]) < 2:
             logging.info("Port count less than 2, can't run this case")
             return
 
-        intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
-        dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
-        dip=0xc0a80001
-        #Hashes Test Name and uses it as id for installing unique groups
-        class_id=abs(hash(inspect.stack()[0][3])) % (256)
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        dst_mac = [0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
+        dip = 0xc0a80001
         ports = config["port_map"].keys()
+        Groups = Queue.LifoQueue()
         for port in ports:
-            #add l2 interface group
-            id=port+class_id<<8
-            vlan_id=port+class_id
-            l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port, vlan_id, True, True)
-            dst_mac[5]=vlan_id
-            #add MPLS interface group
-            mpls_gid, mpls_msg = add_mpls_intf_group(self.controller, l2_gid, dst_mac, intf_src_mac, vlan_id, id)
-            #add MPLS L3 VPN group
-            mpls_label_gid, mpls_label_msg = add_mpls_label_group(self.controller, subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL,
-                     index=id, ref_gid= mpls_gid, push_mpls_header=True, set_mpls_label=port, set_bos=1, set_ttl=32)
-            #ecmp_msg=add_l3_ecmp_group(self.controller, vlan_id, [mpls_label_gid])
+            # add l2 interface group
+            id = port
+            vlan_id = port
+            l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port,
+                                                        vlan_id, True, True)
+            dst_mac[5] = vlan_id
+            # add MPLS interface group
+            mpls_gid, mpls_msg = add_mpls_intf_group(self.controller, l2_gid,
+                                                     dst_mac, intf_src_mac,
+                                                     vlan_id, id)
+            # add MPLS L3 VPN group
+            mpls_label_gid, mpls_label_msg = add_mpls_label_group(
+                    self.controller,
+                    subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL,
+                    index=id, ref_gid=mpls_gid, push_mpls_header=True,
+                    set_mpls_label=port, set_bos=1, set_ttl=32)
+            # ecmp_msg=add_l3_ecmp_group(self.controller, vlan_id, [mpls_label_gid])
             do_barrier(self.controller)
-            #add vlan flow table
-            add_one_vlan_table_flow(self.controller, port, vlan_id, vrf=0, flag=VLAN_TABLE_FLAG_ONLY_TAG)
-            #add termination flow
-            add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id)
-            #add routing flow
-            dst_ip = dip + (vlan_id<<8)
-            add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffffff, mpls_label_gid)
-
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id, vrf=0,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x0800, intf_src_mac,
+                                 vlan_id)
+            # add routing flow
+            dst_ip = dip + (vlan_id << 8)
+            add_unicast_routing_flow(self.controller, 0x0800, dst_ip,
+                                     0xffffffff, mpls_label_gid)
+            Groups._put(l2_gid)
+            Groups._put(mpls_gid)
+            Groups._put(mpls_label_gid)
         do_barrier(self.controller)
 
         switch_mac = ':'.join(['%02X' % x for x in intf_src_mac])
         for in_port in ports:
-            ip_src='192.168.%02d.1' % (class_id+in_port)
+            ip_src = '192.168.%02d.1' % (in_port)
             for out_port in ports:
                 if in_port == out_port:
-                     continue
-                ip_dst='192.168.%02d.1' % (class_id+out_port)
-                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+in_port),
-                    eth_dst=switch_mac, ip_ttl=64, ip_src=ip_src,
-                    ip_dst=ip_dst)
-                pkt=str(parsed_pkt)
+                    continue
+                ip_dst = '192.168.%02d.1' % (out_port)
+                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                               vlan_vid=(in_port),
+                                               eth_dst=switch_mac, ip_ttl=64,
+                                               ip_src=ip_src,
+                                               ip_dst=ip_dst)
+                pkt = str(parsed_pkt)
                 self.dataplane.send(in_port, pkt)
-                #build expect packet
-                mac_dst='00:00:00:22:22:%02X' % (class_id+out_port)
+                # build expect packet
+                mac_dst = '00:00:00:22:22:%02X' % (out_port)
                 label = (out_port, 0, 1, 32)
-                exp_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=(class_id+out_port), ip_ttl=63, ip_src=ip_src,
-                            ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac, label=[label])
-                pkt=str(exp_pkt)
+                exp_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True,
+                                      vlan_vid=(out_port), ip_ttl=63,
+                                      ip_src=ip_src,
+                                      ip_dst=ip_dst, eth_dst=mac_dst,
+                                      eth_src=switch_mac, label=[label])
+                pkt = str(exp_pkt)
                 verify_packet(self, pkt, out_port)
                 verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
+
 @disabled
 class MPLSBUG(base_tests.SimpleDataPlane):
-
     def runTest(self):
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
-
-        if len(config["port_map"]) <2:
+        if len(config["port_map"]) < 2:
             logging.info("Port count less than 2, can't run this case")
             return
-
-        intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
-        dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
-        dip=0xc0a80001
-        index=1
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        dst_mac = [0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
+        dip = 0xc0a80001
+        Groups = Queue.LifoQueue()
         ports = config["port_map"].keys()
         for port in ports:
-            #add l2 interface group
-            vlan_id=port
-            l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port, vlan_id, True, False)
-            dst_mac[5]=vlan_id
-            #add L3 Unicast  group
-            l3_msg=add_l3_unicast_group(self.controller, port, vlanid=vlan_id, id=vlan_id, src_mac=intf_src_mac, dst_mac=dst_mac)
-            #add vlan flow table
-            add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_BOTH)
-            #add termination flow
-            add_termination_flow(self.controller, port, 0x8847, intf_src_mac, vlan_id, goto_table=24)
-            #add mpls flow
+            # add l2 interface group
+            vlan_id = port
+            l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port,
+                                                        vlan_id, True, False)
+            dst_mac[5] = vlan_id
+            # add L3 Unicast  group
+            l3_msg = add_l3_unicast_group(self.controller, port, vlanid=vlan_id,
+                                          id=vlan_id, src_mac=intf_src_mac,
+                                          dst_mac=dst_mac)
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_BOTH)
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x8847, intf_src_mac,
+                                 vlan_id, goto_table=24)
+            # add mpls flow
             add_mpls_flow(self.controller, l3_msg.group_id, port)
-            #add termination flow
-            add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id)
-            #add unicast routing flow
-            dst_ip = dip + (vlan_id<<8)
-            add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffffff, l3_msg.group_id)
-
-            #add entries in the Bridging table to avoid packet-in from mac learning
-            group_id = encode_l2_interface_group_id(vlan_id, port)
-            add_bridge_flow(self.controller, dst_mac, vlan_id, group_id, True)
-
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x0800, intf_src_mac,
+                                 vlan_id)
+            # add unicast routing flow
+            dst_ip = dip + (vlan_id << 8)
+            add_unicast_routing_flow(self.controller, 0x0800, dst_ip,
+                                     0xffffffff, l3_msg.group_id)
+            Groups._put(l2_gid)
+            Groups._put(l3_msg.group_id)
         do_barrier(self.controller)
 
         switch_mac = ':'.join(['%02X' % x for x in intf_src_mac])
         for in_port in ports:
-            mac_src='00:00:00:22:22:%02X' % in_port
-            ip_src='192.168.%02d.1' % in_port
+            mac_src = '00:00:00:22:22:%02X' % in_port
+            ip_src = '192.168.%02d.1' % in_port
             for out_port in ports:
                 if in_port == out_port:
-                     continue
-                ip_dst='192.168.%02d.1' % out_port
+                    continue
+                ip_dst = '192.168.%02d.1' % out_port
                 switch_mac = "00:00:00:cc:cc:cc"
                 label = (out_port, 0, 1, 32)
-                parsed_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=in_port, ip_src=ip_src,
-                             ip_dst=ip_dst, eth_dst=switch_mac, eth_src=mac_src, label=[label])
-                pkt=str(parsed_pkt)
+                parsed_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True,
+                                         vlan_vid=in_port, ip_src=ip_src,
+                                         ip_dst=ip_dst, eth_dst=switch_mac,
+                                         eth_src=mac_src, label=[label])
+                pkt = str(parsed_pkt)
                 self.dataplane.send(in_port, pkt)
 
-                #build expect packet
-                mac_dst='00:00:00:22:22:%02X' % out_port
-                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=out_port,
-                    eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=31, ip_src=ip_src, ip_dst=ip_dst)
-                pkt=str(exp_pkt)
+                # build expect packet
+                mac_dst = '00:00:00:22:22:%02X' % out_port
+                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                            vlan_vid=out_port,
+                                            eth_dst=mac_dst, eth_src=switch_mac,
+                                            ip_ttl=31, ip_src=ip_src,
+                                            ip_dst=ip_dst)
+                pkt = str(exp_pkt)
                 verify_packet(self, pkt, out_port)
                 verify_no_other_packets(self)
-                
-                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=in_port,
-                    eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src,
-                    ip_dst=ip_dst)
-                pkt=str(parsed_pkt)
+
+                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                               vlan_vid=in_port,
+                                               eth_dst=switch_mac,
+                                               eth_src=mac_src, ip_ttl=64,
+                                               ip_src=ip_src,
+                                               ip_dst=ip_dst)
+                pkt = str(parsed_pkt)
                 self.dataplane.send(in_port, pkt)
-                #build expected packet
-                mac_dst='00:00:00:22:22:%02X' % out_port
-                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=out_port,
-                                       eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63,
-                                       ip_src=ip_src, ip_dst=ip_dst)
-                pkt=str(exp_pkt)
+                # build expected packet
+                mac_dst = '00:00:00:22:22:%02X' % out_port
+                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                            vlan_vid=out_port,
+                                            eth_dst=mac_dst, eth_src=switch_mac,
+                                            ip_ttl=63,
+                                            ip_src=ip_src, ip_dst=ip_dst)
+                pkt = str(exp_pkt)
                 verify_packet(self, pkt, out_port)
                 verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
 
 class L3McastToL2(base_tests.SimpleDataPlane):
     """
     Mcast routing to L2
     """
+
     def runTest(self):
         """
         port1 (vlan 300)-> All Ports (vlan 300)
         """
-        #delete_all_flows(self.controller)
-        #delete_all_groups(self.controller)
-
-        if len(config["port_map"]) <3:
+        if len(config["port_map"]) < 3:
             logging.info("Port count less than 3, can't run this case")
-            assert(False)
+            assert (False)
             return
+        Groups = Queue.LifoQueue()
+        vlan_id = 300
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        intf_src_mac_str = ':'.join(['%02X' % x for x in intf_src_mac])
+        dst_mac = [0x01, 0x00, 0x5e, 0x01, 0x01, 0x01]
+        dst_mac_str = ':'.join(['%02X' % x for x in dst_mac])
+        port1_mac = [0x00, 0x11, 0x11, 0x11, 0x11, 0x11]
+        port1_mac_str = ':'.join(['%02X' % x for x in port1_mac])
+        src_ip = 0xc0a80101
+        src_ip_str = "192.168.1.1"
+        dst_ip = 0xe0010101
+        dst_ip_str = "224.1.1.1"
 
-        vlan_id =300
-        intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
-        intf_src_mac_str=':'.join(['%02X' % x for x in intf_src_mac])
-        dst_mac=[0x01, 0x00, 0x5e, 0x01, 0x01, 0x01]
-        dst_mac_str=':'.join(['%02X' % x for x in dst_mac])
-        port1_mac=[0x00, 0x11, 0x11, 0x11, 0x11, 0x11]
-        port1_mac_str=':'.join(['%02X' % x for x in port1_mac])
-        src_ip=0xc0a80101
-        src_ip_str="192.168.1.1"
-        dst_ip=0xe0010101
-        dst_ip_str="224.1.1.1"
-
-        port1=config["port_map"].keys()[0]
-        port2=config["port_map"].keys()[1]
+        port1 = config["port_map"].keys()[0]
+        port2 = config["port_map"].keys()[1]
 
         switch_mac = [0x01, 0x00, 0x5e, 0x00, 0x00, 0x00]
 
-
-        #add l2 interface group
-        l2_intf_group_list=[]
+        # add l2 interface group
+        l2_intf_group_list = []
         for port in config["port_map"].keys():
-            add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) 
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
             if port == port2:
                 continue
-            l2_intf_gid, msg=add_one_l2_interface_group(self.controller, port, vlan_id=vlan_id, is_tagged=True, send_barrier=False)
+            l2_intf_gid, msg = add_one_l2_interface_group(self.controller, port,
+                                                          vlan_id=vlan_id,
+                                                          is_tagged=True,
+                                                          send_barrier=False)
             l2_intf_group_list.append(l2_intf_gid)
+            Groups.put(l2_intf_gid)
 
-        #add termination flow
-        add_termination_flow(self.controller, port1, 0x0800, switch_mac, vlan_id)
+        # add termination flow
+        add_termination_flow(self.controller, port1, 0x0800, switch_mac,
+                             vlan_id)
 
-        #add l3 interface group
-        mcat_group_msg=add_l3_mcast_group(self.controller, vlan_id,  2, l2_intf_group_list)
-        add_mcast4_routing_flow(self.controller, vlan_id, src_ip, 0, dst_ip, mcat_group_msg.group_id)
+        # add l3 interface group
+        mcat_group_msg = add_l3_mcast_group(self.controller, vlan_id, 2,
+                                            l2_intf_group_list)
+        add_mcast4_routing_flow(self.controller, vlan_id, src_ip, 0, dst_ip,
+                                mcat_group_msg.group_id)
+        Groups._put(mcat_group_msg.group_id)
 
-        parsed_pkt = simple_udp_packet(pktlen=100, 
+        parsed_pkt = simple_udp_packet(pktlen=100,
                                        dl_vlan_enable=True,
                                        vlan_vid=vlan_id,
                                        eth_dst=dst_mac_str,
@@ -636,85 +742,104 @@
                                        ip_ttl=64,
                                        ip_src=src_ip_str,
                                        ip_dst=dst_ip_str)
-        pkt=str(parsed_pkt)
+        pkt = str(parsed_pkt)
         self.dataplane.send(port1, pkt)
         for port in config["port_map"].keys():
             if port == port2 or port == port1:
-                 verify_no_packet(self, pkt, port)
-                 continue
+                verify_no_packet(self, pkt, port)
+                continue
             verify_packet(self, pkt, port)
         verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
 
 class L3McastToL3(base_tests.SimpleDataPlane):
     """
     Mcast routing
     """
-    def runTest(self):          
+
+    def runTest(self):
         """
         port1 (vlan 1)-> port 2 (vlan 2)
         """
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
-
-        if len(config["port_map"]) <3:
+        Groups = Queue.LifoQueue()
+        if len(config["port_map"]) < 3:
             logging.info("Port count less than 3, can't run this case")
-            assert(False)
+            assert (False)
             return
 
-        vlan_id =1
-        port2_out_vlan=2
-        port3_out_vlan=3
-        in_vlan=1 #macast group vid shall use input vlan diffe from l3 interface use output vlan        
-        intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
-        intf_src_mac_str=':'.join(['%02X' % x for x in intf_src_mac])        
-        dst_mac=[0x01, 0x00, 0x5e, 0x01, 0x01, 0x01]
-        dst_mac_str=':'.join(['%02X' % x for x in dst_mac])
-        port1_mac=[0x00, 0x11, 0x11, 0x11, 0x11, 0x11]
-        port1_mac_str=':'.join(['%02X' % x for x in port1_mac])
-        src_ip=0xc0a80101
-        src_ip_str="192.168.1.1"
-        dst_ip=0xe0010101
-        dst_ip_str="224.1.1.1"
-        
-        port1=config["port_map"].keys()[0]
-        port2=config["port_map"].keys()[1]
-        port3=config["port_map"].keys()[2]
+        vlan_id = 1
+        port2_out_vlan = 2
+        port3_out_vlan = 3
+        in_vlan = 1  # macast group vid shall use input vlan diffe from l3 interface use output vlan
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        intf_src_mac_str = ':'.join(['%02X' % x for x in intf_src_mac])
+        dst_mac = [0x01, 0x00, 0x5e, 0x01, 0x01, 0x01]
+        dst_mac_str = ':'.join(['%02X' % x for x in dst_mac])
+        port1_mac = [0x00, 0x11, 0x11, 0x11, 0x11, 0x11]
+        port1_mac_str = ':'.join(['%02X' % x for x in port1_mac])
+        src_ip = 0xc0a80101
+        src_ip_str = "192.168.1.1"
+        dst_ip = 0xe0010101
+        dst_ip_str = "224.1.1.1"
 
-        #add l2 interface group
-        for port in config["port_map"].keys():        
-            add_one_l2_interface_group(self.controller, port, vlan_id=vlan_id, is_tagged=False, send_barrier=False)
-            #add vlan flow table
-            add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG)          
-            vlan_id +=1            
+        port1 = config["port_map"].keys()[0]
+        port2 = config["port_map"].keys()[1]
+        port3 = config["port_map"].keys()[2]
 
-        #add termination flow
-        add_termination_flow(self.controller, port1, 0x0800, [0x01, 0x00, 0x5e, 0x00, 0x00, 0x00], vlan_id)
+        # add l2 interface group
+        for port in config["port_map"].keys():
+            l2gid, msg = add_one_l2_interface_group(self.controller, port,
+                                                    vlan_id=vlan_id,
+                                                    is_tagged=False,
+                                                    send_barrier=False)
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            vlan_id += 1
+            Groups._put(l2gid)
 
-        #add l3 interface group
-        port2_ucast_msg=add_l3_interface_group(self.controller, port2, port2_out_vlan, 2, intf_src_mac)
-        port3_ucast_msg=add_l3_interface_group(self.controller, port3, port3_out_vlan, 3, intf_src_mac)        
-        mcat_group_msg=add_l3_mcast_group(self.controller, in_vlan,  2, [port2_ucast_msg.group_id, port3_ucast_msg.group_id])
-        add_mcast4_routing_flow(self.controller, in_vlan, src_ip, 0, dst_ip, mcat_group_msg.group_id)               
-        
-        parsed_pkt = simple_udp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=1,
+        # add termination flow
+        add_termination_flow(self.controller, port1, 0x0800,
+                             [0x01, 0x00, 0x5e, 0x00, 0x00, 0x00], vlan_id)
+
+        # add l3 interface group
+        port2_ucast_msg = add_l3_interface_group(self.controller, port2,
+                                                 port2_out_vlan, 2,
+                                                 intf_src_mac)
+        port3_ucast_msg = add_l3_interface_group(self.controller, port3,
+                                                 port3_out_vlan, 3,
+                                                 intf_src_mac)
+        mcat_group_msg = add_l3_mcast_group(self.controller, in_vlan, 2,
+                                            [port2_ucast_msg.group_id,
+                                             port3_ucast_msg.group_id])
+        add_mcast4_routing_flow(self.controller, in_vlan, src_ip, 0, dst_ip,
+                                mcat_group_msg.group_id)
+        Groups._put(port2_ucast_msg.group_id)
+        Groups._put(port3_ucast_msg.group_id)
+        Groups._put(mcat_group_msg.group_id)
+        parsed_pkt = simple_udp_packet(pktlen=100, dl_vlan_enable=True,
+                                       vlan_vid=1,
                                        eth_dst=dst_mac_str,
                                        eth_src=port1_mac_str,
                                        ip_ttl=64,
                                        ip_src=src_ip_str,
                                        ip_dst=dst_ip_str)
-        pkt=str(parsed_pkt)
-        self.dataplane.send(port1, pkt)            
-        parsed_pkt = simple_udp_packet(pktlen=96, 
+        pkt = str(parsed_pkt)
+        self.dataplane.send(port1, pkt)
+        parsed_pkt = simple_udp_packet(pktlen=96,
                                        eth_dst=dst_mac_str,
                                        eth_src=intf_src_mac_str,
                                        ip_ttl=63,
                                        ip_src=src_ip_str,
                                        ip_dst=dst_ip_str)
-        pkt=str(parsed_pkt)            
+        pkt = str(parsed_pkt)
         verify_packet(self, pkt, port2)
-        verify_packet(self, pkt, port3)        
-        verify_no_other_packets(self)  
-
+        verify_packet(self, pkt, port3)
+        verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
 
 
 class _MplsTermination(base_tests.SimpleDataPlane):
@@ -722,115 +847,288 @@
         Insert IP packet
         Receive MPLS packet
     """
-    def runTest(self):
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
 
-        if len(config["port_map"]) <2:
+    def runTest(self):
+        Groups = Queue.LifoQueue()
+        if len(config["port_map"]) < 2:
             logging.info("Port count less than 2, can't run this case")
             return
 
-        intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
-        dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
-        #Hashes Test Name and uses it as id for installing unique groups
-        class_id=abs(hash(inspect.stack()[0][3])) % (256)
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        dst_mac = [0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
+        # Assigns unique hardcoded test_id to make sure tests don't overlap when writing rules
         ports = config["port_map"].keys()
         for port in ports:
-            #add l2 interface group
-            id = port + class_id<<8
-            vlan_id=port+class_id
-            l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port, vlan_id, True, False)
-            dst_mac[5]=vlan_id
-            #add L3 Unicast  group
-            l3_msg=add_l3_unicast_group(self.controller, port, vlanid=vlan_id, id=id, src_mac=intf_src_mac, dst_mac=dst_mac)
-            #add L3 ecmp group
+            # add l2 interface group
+            id = port
+            vlan_id = id
+            l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port,
+                                                        vlan_id, True, False)
+            dst_mac[5] = vlan_id
+            # add L3 Unicast  group
+            l3_msg = add_l3_unicast_group(self.controller, port, vlanid=vlan_id,
+                                          id=id, src_mac=intf_src_mac,
+                                          dst_mac=dst_mac)
+            # add L3 ecmp group
             ecmp_msg = add_l3_ecmp_group(self.controller, id, [l3_msg.group_id])
-            #add vlan flow table
-            add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG)
-            #add termination flow
-            add_termination_flow(self.controller, port, 0x8847, intf_src_mac, vlan_id, goto_table=24)
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x8847, intf_src_mac,
+                                 vlan_id, goto_table=24)
             add_mpls_flow(self.controller, ecmp_msg.group_id, port)
-
+            Groups._put(l2_gid)
+            Groups._put(l3_msg.group_id)
+            Groups._put(ecmp_msg.group_id)
         do_barrier(self.controller)
 
         switch_mac = ':'.join(['%02X' % x for x in intf_src_mac])
         for in_port in ports:
-            ip_src='192.168.%02d.1' % (class_id+in_port)
+            ip_src = '192.168.%02d.1' % (in_port)
             for out_port in ports:
                 if in_port == out_port:
                     continue
-                ip_dst='192.168.%02d.1' % (class_id+out_port)
+                ip_dst = '192.168.%02d.1' % (out_port)
 
                 label = (out_port, 0, 1, 32)
-                parsed_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=(in_port+class_id), ip_src=ip_src,
-                                         ip_dst=ip_dst, eth_dst=switch_mac, label=[label])
-                pkt=str(parsed_pkt)
+                parsed_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True,
+                                         vlan_vid=(in_port), ip_src=ip_src,
+                                         ip_dst=ip_dst, eth_dst=switch_mac,
+                                         label=[label])
+                pkt = str(parsed_pkt)
                 self.dataplane.send(in_port, pkt)
 
-                #build expect packet
-                mac_dst='00:00:00:22:22:%02X' % (class_id+out_port)
-                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+out_port),
-                                            eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=31, ip_src=ip_src, ip_dst=ip_dst)
-                pkt=str(exp_pkt)
+                # build expect packet
+                mac_dst = '00:00:00:22:22:%02X' % (out_port)
+                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                            vlan_vid=(out_port),
+                                            eth_dst=mac_dst, eth_src=switch_mac,
+                                            ip_ttl=31, ip_src=ip_src,
+                                            ip_dst=ip_dst)
+                pkt = str(exp_pkt)
                 verify_packet(self, pkt, out_port)
                 verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
 
 class _32ECMPL3(base_tests.SimpleDataPlane):
     """
     Port1(vid=in_port, src=00:00:00:22:22:in_port, 192.168.outport.1) ,
     Port2(vid=outport, dst=00:00:00:22:22:outport, 192.168.outport.1)
     """
-    def runTest(self):
-        delete_all_flows(self.controller)
-        delete_all_groups(self.controller)
 
-        if len(config["port_map"]) <2:
+    def runTest(self):
+        Groups = Queue.LifoQueue()
+        if len(config["port_map"]) < 2:
             logging.info("Port count less than 2, can't run this case")
             return
 
-        intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
-        dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
-        dip=0xc0a80001
-        #Hashes Test Name and uses it as id for installing unique groups
-        class_id=abs(hash(inspect.stack()[0][3])) % (256)
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        dst_mac = [0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
+        dip = 0xc0a80001
+        # Hashes Test Name and uses it as id for installing unique groups
         ports = config["port_map"].keys()
         for port in ports:
-            vlan_id=port
-            id=port+class_id<<8
-            #add l2 interface group
-            add_one_l2_interface_group(self.controller, port, vlan_id=vlan_id, is_tagged=True, send_barrier=False)
-            dst_mac[5]=vlan_id
-            l3_msg=add_l3_unicast_group(self.controller, port, vlanid=vlan_id, id=id, src_mac=intf_src_mac, dst_mac=dst_mac)
-            ecmp_msg=add_l3_ecmp_group(self.controller, id, [l3_msg.group_id])
-            #add vlan flow table
-            add_one_vlan_table_flow(self.controller, port, vlan_id,  flag=VLAN_TABLE_FLAG_ONLY_TAG)
-            #add termination flow
-            add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id)
-            #add unicast routing flow
-            dst_ip = dip + (vlan_id<<8)
-            add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffffff, ecmp_msg.group_id)
-        
+            vlan_id = port
+            id = port
+            # add l2 interface group
+            l2_gid, msg = add_one_l2_interface_group(self.controller, port,
+                                                     vlan_id=vlan_id,
+                                                     is_tagged=True,
+                                                     send_barrier=False)
+            dst_mac[5] = vlan_id
+            l3_msg = add_l3_unicast_group(self.controller, port, vlanid=vlan_id,
+                                          id=id, src_mac=intf_src_mac,
+                                          dst_mac=dst_mac)
+            ecmp_msg = add_l3_ecmp_group(self.controller, id, [l3_msg.group_id])
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x0800, intf_src_mac,
+                                 vlan_id)
+            # add unicast routing flow
+            dst_ip = dip + (vlan_id << 8)
+            add_unicast_routing_flow(self.controller, 0x0800, dst_ip,
+                                     0xffffffff, ecmp_msg.group_id)
+            Groups._put(l2_gid)
+            Groups._put(l3_msg.group_id)
+            Groups._put(ecmp_msg.group_id)
         do_barrier(self.controller)
 
         switch_mac = ':'.join(['%02X' % x for x in intf_src_mac])
         for in_port in ports:
-            mac_src='00:00:00:22:22:%02X' % in_port
-            ip_src='192.168.%02d.1' % in_port
+            mac_src = '00:00:00:22:22:%02X' % in_port
+            ip_src = '192.168.%02d.1' % in_port
             for out_port in ports:
                 if in_port == out_port:
                     continue
-                ip_dst='192.168.%02d.1' % out_port
-                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=in_port,
-                                               eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src,
+                ip_dst = '192.168.%02d.1' % out_port
+                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                               vlan_vid=in_port,
+                                               eth_dst=switch_mac,
+                                               eth_src=mac_src, ip_ttl=64,
+                                               ip_src=ip_src,
                                                ip_dst=ip_dst)
-                pkt=str(parsed_pkt)
+                pkt = str(parsed_pkt)
                 self.dataplane.send(in_port, pkt)
-                #build expected packet
-                mac_dst='00:00:00:22:22:%02X' % out_port
-                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=out_port,
-                                            eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63,
+                # build expected packet
+                mac_dst = '00:00:00:22:22:%02X' % out_port
+                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                            vlan_vid=out_port,
+                                            eth_dst=mac_dst, eth_src=switch_mac,
+                                            ip_ttl=63,
                                             ip_src=ip_src, ip_dst=ip_dst)
-                pkt=str(exp_pkt)
+                pkt = str(exp_pkt)
                 verify_packet(self, pkt, out_port)
                 verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
 
+
+class _24ECMPL3(base_tests.SimpleDataPlane):
+    """
+    Port1(vid=in_port, src=00:00:00:22:22:in_port, 192.168.outport.1) ,
+    Port2(vid=outport, dst=00:00:00:22:22:outport, 192.168.outport.1)
+    """
+
+    def runTest(self):
+        Groups = Queue.LifoQueue()
+        if len(config["port_map"]) < 2:
+            logging.info("Port count less than 2, can't run this case")
+            return
+
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        dst_mac = [0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
+        dip = 0xc0a80001
+        # Hashes Test Name and uses it as id for installing unique groups
+        ports = config["port_map"].keys()
+        for port in ports:
+            vlan_id = port
+            id = port
+            # add l2 interface group
+            l2_gid, msg = add_one_l2_interface_group(self.controller, port,
+                                                     vlan_id=vlan_id,
+                                                     is_tagged=True,
+                                                     send_barrier=False)
+            dst_mac[5] = vlan_id
+            l3_msg = add_l3_unicast_group(self.controller, port, vlanid=vlan_id,
+                                          id=id, src_mac=intf_src_mac,
+                                          dst_mac=dst_mac)
+            ecmp_msg = add_l3_ecmp_group(self.controller, id, [l3_msg.group_id])
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x0800, intf_src_mac,
+                                 vlan_id)
+            # add unicast routing flow
+            dst_ip = dip + (vlan_id << 8)
+            add_unicast_routing_flow(self.controller, 0x0800, dst_ip,
+                                     0xffffff00, ecmp_msg.group_id)
+            Groups._put(l2_gid)
+            Groups._put(l3_msg.group_id)
+            Groups._put(ecmp_msg.group_id)
+        do_barrier(self.controller)
+
+        switch_mac = ':'.join(['%02X' % x for x in intf_src_mac])
+        for in_port in ports:
+            mac_src = '00:00:00:22:22:%02X' % in_port
+            ip_src = '192.168.%02d.1' % in_port
+            for out_port in ports:
+                if in_port == out_port:
+                    continue
+                ip_dst = '192.168.%02d.1' % out_port
+                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                               vlan_vid=in_port,
+                                               eth_dst=switch_mac,
+                                               eth_src=mac_src, ip_ttl=64,
+                                               ip_src=ip_src,
+                                               ip_dst=ip_dst)
+                pkt = str(parsed_pkt)
+                self.dataplane.send(in_port, pkt)
+                # build expected packet
+                mac_dst = '00:00:00:22:22:%02X' % out_port
+                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                            vlan_vid=out_port,
+                                            eth_dst=mac_dst, eth_src=switch_mac,
+                                            ip_ttl=63,
+                                            ip_src=ip_src, ip_dst=ip_dst)
+                pkt = str(exp_pkt)
+                verify_packet(self, pkt, out_port)
+                verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)
+
+
+class _24UcastTagged(base_tests.SimpleDataPlane):
+    """
+    Verify a IP forwarding works for a /32 rule to L3 Unicast Interface
+    """
+
+    def runTest(self):
+        test_id = 26
+        if len(config["port_map"]) < 2:
+            logging.info("Port count less than 2, can't run this case")
+            return
+
+        intf_src_mac = [0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc]
+        dst_mac = [0x00, 0x00, 0x00, 0x22, 0x22, 0x00]
+        dip = 0xc0a80001
+        ports = config["port_map"].keys()
+        Groups = Queue.LifoQueue()
+        for port in ports:
+            # add l2 interface group
+            vlan_id = port + test_id
+            l2gid, msg = add_one_l2_interface_group(self.controller, port,
+                                                    vlan_id=vlan_id,
+                                                    is_tagged=True,
+                                                    send_barrier=False)
+            dst_mac[5] = vlan_id
+            l3_msg = add_l3_unicast_group(self.controller, port, vlanid=vlan_id,
+                                          id=vlan_id, src_mac=intf_src_mac,
+                                          dst_mac=dst_mac)
+            # add vlan flow table
+            add_one_vlan_table_flow(self.controller, port, vlan_id,
+                                    flag=VLAN_TABLE_FLAG_ONLY_TAG)
+            # add termination flow
+            add_termination_flow(self.controller, port, 0x0800, intf_src_mac,
+                                 vlan_id)
+            # add unicast routing flow
+            dst_ip = dip + (vlan_id << 8)
+            add_unicast_routing_flow(self.controller, 0x0800, dst_ip,
+                                     0xffffff00, l3_msg.group_id)
+            Groups.put(l2gid)
+            Groups.put(l3_msg.group_id)
+        do_barrier(self.controller)
+
+        switch_mac = ':'.join(['%02X' % x for x in intf_src_mac])
+        for in_port in ports:
+            mac_src = '00:00:00:22:22:%02X' % (test_id + in_port)
+            ip_src = '192.168.%02d.1' % (test_id + in_port)
+            for out_port in ports:
+                if in_port == out_port:
+                    continue
+                ip_dst = '192.168.%02d.1' % (test_id + out_port)
+                parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                               vlan_vid=(test_id + in_port),
+                                               eth_dst=switch_mac,
+                                               eth_src=mac_src, ip_ttl=64,
+                                               ip_src=ip_src,
+                                               ip_dst=ip_dst)
+                pkt = str(parsed_pkt)
+                self.dataplane.send(in_port, pkt)
+                # build expected packet
+                mac_dst = '00:00:00:22:22:%02X' % (test_id + out_port)
+                exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True,
+                                            vlan_vid=(test_id + out_port),
+                                            eth_dst=mac_dst, eth_src=switch_mac,
+                                            ip_ttl=63,
+                                            ip_src=ip_src, ip_dst=ip_dst)
+                pkt = str(exp_pkt)
+                verify_packet(self, pkt, out_port)
+                verify_no_other_packets(self)
+        delete_all_flows(self.controller)
+        delete_groups(self.controller, Groups)