diff --git a/README b/README
index fff7c8a..0c8ba3d 100644
--- a/README
+++ b/README
@@ -53,8 +53,8 @@
 Quick Start
 +++++++++++
 
-    You need to have Python setup tools and Scapy installed on your
-    system.  See 'Pre-requisites' below.
+    You need to have Python and Scapy installed on your system.
+    See 'Pre-requisites' below.
 
     Make sure your switch is running and trying to connect to a
     controller on the machine where you're running oft (normally port
@@ -65,7 +65,7 @@
 
       # git clone git://github.com/floodlight/oftest
       # cd oftest
-      # make -C tools/munger install
+      # make -C tools/munger
          Make sure the switch you want to test is running --
          see (4) below for the reference switch example.
       # ./oft --list
@@ -83,7 +83,6 @@
           to a controller on the machine running oft.
         * Python 2.5 or 2.6.  You can run platforms using eth interfaces
           with Python 2.4.  Python 2.7 may work.
-        * Python setup tools (e.g.: sudo apt-get install python-setuptools)
         * oftest checked out (called <oftest> here)
         * scapy installed:  http://www.secdev.org/projects/scapy/
           'sudo apt-get install scapy' should work on Debian.
@@ -98,11 +97,9 @@
         the file in <oftest>/tools/pylibopenflow/include/openflow.h
         This is currently the 1.0 release file.
 
-        cd <oftest>/tools/munger
-        make install
+        make -C <oftest>/tools/munger
 
-        This places files in <oftest>/src/python/oftest/src and then
-        calls setuptools to install on the local host
+        This places files in <oftest>/src/python/oftest/src.
 
     3.  Edit configuration if necessary
         Local platforms work with veth interface pairs and default to
@@ -148,21 +145,6 @@
         cd <oftest>
         sudo ./oft --help
 
-Helpful Note: Rebuilding
-++++++++++++++++++++++++
-
-    If you ever make a change to the code in src/oftest/python...
-    you must rebuild and reinstall the source code.  See Step (2)
-    in the Longer Start above.
-
-    If you see
-
-        WARNING:..:Could not import file ...
-
-    There is likely a Python error in the file.  Try invoking the
-    Python cli directly and importing the file to get more
-    information.
-
 Helpful Note: Recovering From Crash
 +++++++++++++++++++++++++++++++++++
 
@@ -257,9 +239,9 @@
 Important Notes
 +++++++++++++++
 
-    1.  If you edit any of the files in src/python/oftest or any of the
-    scripts in tools/munger/scripts, you MUST re-run make install.  This
-    is easy to forget.
+    1.  If you change any of the code generation scripts in
+    tools/munger/scripts you must re-run make -C tools/munger to
+    regenerate the OpenFlow message classes.
 
     2.  If your running into issues with transactions, and it appears that
     OpenFlow messages aren't quite right, start by looking at any length
diff --git a/src/python/setup.py b/src/python/setup.py
deleted file mode 100644
index b5a462d..0000000
--- a/src/python/setup.py
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/usr/bin/env python
-'''Setuptools params'''
-
-from setuptools import setup, find_packages
-
-modname = distname = 'oftest'
-
-setup(
-    name='oftest',
-    version='0.0.1',
-    description='An OpenFlow Testing Framework',
-    author='Dan Talayco/Tatsuya Yabe',
-    author_email='dtalayco@stanford.edu',
-    packages=find_packages(),
-    long_description="""\
-OpenFlow test framework package.
-      """,
-      classifiers=[
-          "License :: OSI Approved :: GNU General Public License (GPL)",
-          "Programming Language :: Python",
-          "Development Status :: 4 - Beta",
-          "Intended Audience :: Developers",
-          "Topic :: Internet",
-      ],
-      keywords='networking protocol Internet OpenFlow validation',
-      license='unspecified',
-      install_requires=[
-        'setuptools',
-        'doxypy',
-        'pylint'
-      ])
diff --git a/tools/munger/Makefile b/tools/munger/Makefile
index 31f3423..dc5bf1c 100644
--- a/tools/munger/Makefile
+++ b/tools/munger/Makefile
@@ -12,7 +12,6 @@
 PYLIBOF_DIR = ${TOOLS_DIR}/pylibopenflow
 
 TARGET_DIR = ${TOP_DIR}/src/python/oftest
-SETUP_DIR = ${TOP_DIR}/src/python/
 
 # Relative to pyopenflow-pythonize exec location
 OF_HEADER = include/openflow.h
@@ -41,9 +40,6 @@
 
 all: ${GEN_FILES}
 
-install: all
-	(cd ${SETUP_DIR} && sudo python setup.py install)
-
 # The core OpenFlow libraries generated from openflow.h
 ${TARGET_DIR}/cstruct.py: ${CSTRUCT_DEP}
 	${CSTRUCT_GEN_CMD} > ${CSTRUCT_AUX_INFO}
@@ -83,7 +79,6 @@
 	@echo "   all:     Puts generated .py in ${TARGET_DIR}"
 	@echo "   lint:    Puts error report in lint/*.log"
 	@echo "   doc:     Runs doxygen on generated files in ../../doc"
-	@echo "   install: Run setup tools for generated python	source"
 	@echo "   clean:   Removes generated files"
 	@echo
 	@echo "Debug info:"