"""
Check README file
"""
import Queue

from oftest import config
import inspect
import logging
import oftest.base_tests as base_tests
import ofp
from oftest.testutils import *
from accton_util import *
from utils import *


class PacketInUDP( base_tests.SimpleDataPlane ):
    """
    Verify ACL rule for IP_PROTO=2 wont match a UDP packet and a rule for IP_PROTO=17 WILL match a UDP packet.
    """

    def runTest( self ):
        try:
            parsed_vlan_pkt = simple_udp_packet( pktlen=104, vlan_vid=0x1001, dl_vlan_enable=True )
            vlan_pkt = str( parsed_vlan_pkt )
            # create match
            match = ofp.match( )
            match.oxm_list.append( ofp.oxm.eth_type( 0x0800 ) )
            match.oxm_list.append( ofp.oxm.ip_proto( 2 ) )
            request = ofp.message.flow_add( table_id=60, cookie=42, match=match, instructions=[
                ofp.instruction.apply_actions( actions=[
                    ofp.action.output( port=ofp.OFPP_CONTROLLER, max_len=ofp.OFPCML_NO_BUFFER ) ] ), ],
                    buffer_id=ofp.OFP_NO_BUFFER, priority=1 )
            logging.info( "Inserting packet in flow to controller" )
            self.controller.message_send( request )

            for of_port in config[ "port_map" ].keys( ):
                logging.info( "PacketInMiss test, port %d", of_port )
                self.dataplane.send( of_port, vlan_pkt )

                verify_no_packet_in( self, vlan_pkt, of_port )
            delete_all_flows( self.controller )
            do_barrier( self.controller )

            match = ofp.match( )
            match.oxm_list.append( ofp.oxm.eth_type( 0x0800 ) )
            match.oxm_list.append( ofp.oxm.ip_proto( 17 ) )
            request = ofp.message.flow_add( table_id=60, cookie=42, match=match, instructions=[
                ofp.instruction.apply_actions( actions=[
                    ofp.action.output( port=ofp.OFPP_CONTROLLER, max_len=ofp.OFPCML_NO_BUFFER ) ] ), ],
                    buffer_id=ofp.OFP_NO_BUFFER, priority=1 )
            logging.info( "Inserting packet in flow to controller" )
            self.controller.message_send( request )
            do_barrier( self.controller )

            for of_port in config[ "port_map" ].keys( ):
                logging.info( "PacketInMiss test, port %d", of_port )
                self.dataplane.send( of_port, vlan_pkt )

                verify_packet_in( self, vlan_pkt, of_port, ofp.OFPR_ACTION )

                verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_all_groups( self.controller )


@disabled
class ArpNL2( base_tests.SimpleDataPlane ):
    def runTest( self ):
        delete_all_flows( self.controller )
        delete_all_groups( self.controller )

        ports = sorted( config[ "port_map" ].keys( ) )
        match = ofp.match( )
        match.oxm_list.append( ofp.oxm.eth_type( 0x0806 ) )
        request = ofp.message.flow_add( table_id=60, cookie=42, match=match, instructions=[
            ofp.instruction.apply_actions( actions=[
                ofp.action.output( port=ofp.OFPP_CONTROLLER, max_len=ofp.OFPCML_NO_BUFFER ) ] ), ],
                buffer_id=ofp.OFP_NO_BUFFER, priority=40000 )
        self.controller.message_send( request )
        for port in ports:
            add_one_l2_interface_group( self.controller, port, 1, False, False )
            add_one_vlan_table_flow( self.controller, port, 1, flag=VLAN_TABLE_FLAG_ONLY_BOTH )
            group_id = encode_l2_interface_group_id( 1, port )
            add_bridge_flow( self.controller, [ 0x00, 0x12, 0x34, 0x56, 0x78, port ], 1, group_id, True )
        do_barrier( self.controller )
        parsed_arp_pkt = simple_arp_packet( )
        arp_pkt = str( parsed_arp_pkt )

        for out_port in ports:
            self.dataplane.send( out_port, arp_pkt )
            verify_packet_in( self, arp_pkt, out_port, ofp.OFPR_ACTION )
            # change dest based on port number
            mac_dst = '00:12:34:56:78:%02X' % out_port
            for in_port in ports:
                if in_port == out_port:
                    continue
                # change source based on port number to avoid packet-ins from learning
                mac_src = '00:12:34:56:78:%02X' % in_port
                parsed_pkt = simple_tcp_packet( eth_dst=mac_dst, eth_src=mac_src )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )

                for ofport in ports:
                    if ofport in [ out_port ]:
                        verify_packet( self, pkt, ofport )
                    else:
                        verify_no_packet( self, pkt, ofport )

                verify_no_other_packets( self )

class PacketInArp( base_tests.SimpleDataPlane ):
    """
    Verify Packet-in message from eth_type 0x806 on ACL table
    """

    def runTest( self ):
        try:
            parsed_arp_pkt = simple_arp_packet( )
            arp_pkt = str( parsed_arp_pkt )
            # create match
            match = ofp.match( )
            match.oxm_list.append( ofp.oxm.eth_type( 0x0806 ) )
            request = ofp.message.flow_add( table_id=60, cookie=42, match=match, instructions=[
                ofp.instruction.apply_actions( actions=[
                    ofp.action.output( port=ofp.OFPP_CONTROLLER, max_len=ofp.OFPCML_NO_BUFFER ) ] ), ],
                    buffer_id=ofp.OFP_NO_BUFFER, priority=1 )

            logging.info( "Inserting packet in flow to controller" )
            self.controller.message_send( request )
            do_barrier( self.controller )

            for of_port in config[ "port_map" ].keys( ):
                logging.info( "PacketInMiss test, port %d", of_port )
                self.dataplane.send( of_port, arp_pkt )

                verify_packet_in( self, arp_pkt, of_port, ofp.OFPR_ACTION )

                verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_all_groups( self.controller )


class PacketInIPTable( base_tests.SimpleDataPlane ):
    """
        Verify Packet-in message from IP table when controller action is used
    Send a packet to each dataplane port and verify that a packet
    in message is received from the controller for each
    #todo verify you stop receiving after adding rule
    """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            ports = sorted( config[ "port_map" ].keys( ) )

            for port in ports:
                # add l2 interface group
                vlan_id = port
                add_one_l2_interface_group( self.controller, port, vlan_id=vlan_id, is_tagged=True,
                        send_barrier=False )
                dst_mac[ 5 ] = vlan_id
                l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id, id=vlan_id,
                        src_mac=intf_src_mac, dst_mac=dst_mac )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add unicast routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffff00, l3_msg.group_id,
                        send_ctrl=True )
                Groups.put( l3_msg.group_id )

            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                mac_src = '00:00:00:22:22:%02X' % in_port
                ip_src = '192.168.%02d.1' % in_port
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % out_port
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=in_port,
                            eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    verify_packet_in( self, pkt, in_port, ofp.OFPR_ACTION )
                    # verify_no_other_packets(self)
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class L2FloodQinQ( base_tests.SimpleDataPlane ):
    """
    Verify Vlan based flooding of QinQ based on its outer vlan
    """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            ports = sorted( config[ "port_map" ].keys( ) )
            vlan_id = 1

            for port in ports:
                L2gid, l2msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, False )
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                Groups.put( L2gid )

            msg = add_l2_flood_group( self.controller, ports, vlan_id, vlan_id )
            Groups.put( msg.group_id )
            add_bridge_flow( self.controller, None, vlan_id, msg.group_id, True )
            do_barrier( self.controller )

            # verify flood
            for ofport in ports:
                # change dest based on port number
                mac_src = '00:12:34:56:78:%02X' % ofport
                parsed_pkt = simple_tcp_packet_two_vlan( pktlen=108, out_dl_vlan_enable=True,
                        out_vlan_vid=vlan_id, in_dl_vlan_enable=True, in_vlan_vid=10,
                        eth_dst='00:12:34:56:78:9a', eth_src=mac_src )
                pkt = str( parsed_pkt )
                self.dataplane.send( ofport, pkt )
                # self won't rx packet
                verify_no_packet( self, pkt, ofport )
                # others will rx packet
                tmp_ports = list( ports )
                tmp_ports.remove( ofport )
                verify_packets( self, pkt, tmp_ports )

            verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


@disabled
class L2FloodTagged( base_tests.SimpleDataPlane ):
    """
    Test L2 flood to a vlan
    Send a packet with unknown dst_mac and check if the packet is flooded to all ports except inport
    """

    def runTest( self ):
        # Hashes Test Name and uses it as id for installing unique groups
        vlan_id = abs( hash( inspect.stack( )[ 0 ][ 3 ] ) ) % (256)
        print vlan_id

        ports = sorted( config[ "port_map" ].keys( ) )

        delete_all_flows( self.controller )
        delete_all_groups( self.controller )

        # Installing flows to avoid packet-in
        for port in ports:
            add_one_l2_interface_group( self.controller, port, vlan_id, True, False )
            add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
        msg = add_l2_flood_group( self.controller, ports, vlan_id, vlan_id )
        add_bridge_flow( self.controller, None, vlan_id, msg.group_id, True )
        do_barrier( self.controller )

        # verify flood
        for ofport in ports:
            # change dest based on port number
            pkt = str(
                    simple_tcp_packet( dl_vlan_enable=True, vlan_vid=vlan_id, eth_dst='00:12:34:56:78:9a' ) )
            self.dataplane.send( ofport, pkt )
            # self won't rx packet
            verify_no_packet( self, pkt, ofport )
            # others will rx packet
            tmp_ports = list( ports )
            tmp_ports.remove( ofport )
            verify_packets( self, pkt, tmp_ports )
        verify_no_other_packets( self )


class L2UnicastTagged( base_tests.SimpleDataPlane ):
    """ Verify Bridging works: match(VID, DST_MAC)> fwd(port) """

    def runTest( self ):

        Groups = Queue.LifoQueue( )
        try:
            ports = sorted( config[ "port_map" ].keys( ) )
            vlan_id = 1;
            for port in ports:
                L2gid, l2msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, False )
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                Groups.put( L2gid )
                add_bridge_flow( self.controller, [ 0x00, 0x12, 0x34, 0x56, 0x78, port ], vlan_id, L2gid,
                        True )
            do_barrier( self.controller )

            for out_port in ports:
                # change dest based on port number
                mac_dst = '00:12:34:56:78:%02X' % out_port
                for in_port in ports:
                    if in_port == out_port:
                        continue
                    pkt = str( simple_tcp_packet( dl_vlan_enable=True, vlan_vid=vlan_id, eth_dst=mac_dst ) )
                    self.dataplane.send( in_port, pkt )
                    for ofport in ports:
                        if ofport in [ out_port ]:
                            verify_packet( self, pkt, ofport )
                        else:
                            verify_no_packet( self, pkt, ofport )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class Mtu1500( base_tests.SimpleDataPlane ):
    """V erifies basic mtu limits"""
    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            ports = sorted( config[ "port_map" ].keys( ) )
            vlan_id = 18
            for port in ports:
                L2gid, msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, False )
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                Groups.put( L2gid )
                add_bridge_flow( self.controller, [ 0x00, 0x12, 0x34, 0x56, 0x78, port ], vlan_id, L2gid,
                        True )
            do_barrier( self.controller )

            for out_port in ports:
                # change dest based on port number
                mac_dst = '00:12:34:56:78:%02X' % out_port
                for in_port in ports:
                    if in_port == out_port:
                        continue
                    pkt = str( simple_tcp_packet( pktlen=1500, dl_vlan_enable=True, vlan_vid=vlan_id,
                            eth_dst=mac_dst ) )
                    self.dataplane.send( in_port, pkt )
                    for ofport in ports:
                        if ofport in [ out_port ]:
                            verify_packet( self, pkt, ofport )
                        else:
                            verify_no_packet( self, pkt, ofport )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _32UcastTagged( base_tests.SimpleDataPlane ):
    """ Verify /32 IP forwarding to L3 Interface"""

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            test_id = 26
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # add l2 interface group
                vlan_id = port + test_id
                l2gid, msg = add_one_l2_interface_group( self.controller, port, vlan_id=vlan_id,
                        is_tagged=True, send_barrier=False )
                dst_mac[ 5 ] = vlan_id
                l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id, id=vlan_id,
                        src_mac=intf_src_mac, dst_mac=dst_mac )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add unicast routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffffff, l3_msg.group_id )
                Groups.put( l2gid )
                Groups.put( l3_msg.group_id )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                mac_src = '00:00:00:22:32:%02X' % (test_id + in_port)
                ip_src = '192.168.%02d.1' % (test_id + in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % (test_id + out_port)
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True,
                            vlan_vid=(test_id + in_port), eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64,
                            ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expected packet
                    mac_dst = '00:00:00:22:22:%02X' % (test_id + out_port)
                    exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True,
                            vlan_vid=(test_id + out_port), eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63,
                            ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _32VPN( base_tests.SimpleDataPlane ):
    """ Verify MPLS IP VPN Initiation from /32 rule   """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # add l2 interface group
                id = port
                vlan_id = port
                l2_gid, l2_msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, True )
                dst_mac[ 5 ] = vlan_id
                # add MPLS interface group
                mpls_gid, mpls_msg = add_mpls_intf_group( self.controller, l2_gid, dst_mac, intf_src_mac,
                        vlan_id, id )
                # add MPLS L3 VPN group
                mpls_label_gid, mpls_label_msg = add_mpls_label_group( self.controller,
                        subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, index=id, ref_gid=mpls_gid,
                        push_mpls_header=True, set_mpls_label=port, set_bos=1, set_ttl=32 )
                # ecmp_msg=add_l3_ecmp_group(self.controller, vlan_id, [mpls_label_gid])
                do_barrier( self.controller )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, vrf=2,
                        flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffffff, mpls_label_gid, vrf=2 )
                Groups._put( l2_gid )
                Groups._put( mpls_gid )
                Groups._put( mpls_label_gid )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                ip_src = '192.168.%02d.1' % (in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % (out_port)
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=(in_port),
                            eth_dst=switch_mac, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expect packet
                    mac_dst = '00:00:00:22:22:%02X' % (out_port)
                    label = (out_port, 0, 1, 32)
                    exp_pkt = mpls_packet( pktlen=104, dl_vlan_enable=True, vlan_vid=(out_port), ip_ttl=63,
                            ip_src=ip_src, ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac,
                            label=[ label ] )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _32EcmpVpn( base_tests.SimpleDataPlane ):
    """  Verify MPLS IP VPN Initiation from /32 rule using ECMP  """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # add l2 interface group
                id = port
                vlan_id = port
                l2_gid, l2_msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, True )
                dst_mac[ 5 ] = vlan_id
                # add MPLS interface group
                mpls_gid, mpls_msg = add_mpls_intf_group( self.controller, l2_gid, dst_mac, intf_src_mac,
                        vlan_id, id )
                # add MPLS L3 VPN group
                mpls_label_gid, mpls_label_msg = add_mpls_label_group( self.controller,
                        subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, index=id, ref_gid=mpls_gid,
                        push_mpls_header=True, set_mpls_label=port, set_bos=1, set_ttl=32 )
                ecmp_msg = add_l3_ecmp_group( self.controller, vlan_id, [ mpls_label_gid ] )
                do_barrier( self.controller )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, vrf=0,
                        flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffffff, ecmp_msg.group_id )
                Groups._put( l2_gid )
                Groups._put( mpls_gid )
                Groups._put( mpls_label_gid )
                Groups._put( ecmp_msg.group_id )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                ip_src = '192.168.%02d.1' % (in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % (out_port)
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=(in_port),
                            eth_dst=switch_mac, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expect packet
                    mac_dst = '00:00:00:22:22:%02X' % (out_port)
                    label = (out_port, 0, 1, 32)
                    exp_pkt = mpls_packet( pktlen=104, dl_vlan_enable=True, vlan_vid=(out_port), ip_ttl=63,
                            ip_src=ip_src, ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac,
                            label=[ label ] )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _32ECMPL3( base_tests.SimpleDataPlane ):
    """ Verifies /32 IP routing and ECMP """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            # Hashes Test Name and uses it as id for installing unique groups
            ports = config[ "port_map" ].keys( )
            for port in ports:
                vlan_id = port
                id = port
                # add l2 interface group
                l2_gid, msg = add_one_l2_interface_group( self.controller, port, vlan_id=vlan_id,
                        is_tagged=True, send_barrier=False )
                dst_mac[ 5 ] = vlan_id
                l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id, id=id,
                        src_mac=intf_src_mac, dst_mac=dst_mac )
                ecmp_msg = add_l3_ecmp_group( self.controller, id, [ l3_msg.group_id ] )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add unicast routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffffff, ecmp_msg.group_id )
                Groups._put( l2_gid )
                Groups._put( l3_msg.group_id )
                Groups._put( ecmp_msg.group_id )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                mac_src = '00:00:00:22:22:%02X' % in_port
                ip_src = '192.168.%02d.1' % in_port
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % out_port
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=in_port,
                            eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expected packet
                    mac_dst = '00:00:00:22:22:%02X' % out_port
                    exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=out_port,
                            eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _24VPN( base_tests.SimpleDataPlane ):
    """  Verify MPLS IP VPN Initiation from /32 rule using ECMP  """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # add l2 interface group
                id = port
                vlan_id = port
                l2_gid, l2_msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, True )
                dst_mac[ 5 ] = vlan_id
                # add MPLS interface group
                mpls_gid, mpls_msg = add_mpls_intf_group( self.controller, l2_gid, dst_mac, intf_src_mac,
                        vlan_id, id )
                # add MPLS L3 VPN group
                mpls_label_gid, mpls_label_msg = add_mpls_label_group( self.controller,
                        subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, index=id, ref_gid=mpls_gid,
                        push_mpls_header=True, set_mpls_label=port, set_bos=1, set_ttl=32 )
                # ecmp_msg=add_l3_ecmp_group(self.controller, vlan_id, [mpls_label_gid])
                do_barrier( self.controller )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, vrf=0,
                        flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffff00, mpls_label_gid )
                Groups._put( l2_gid )
                Groups._put( mpls_gid )
                Groups._put( mpls_label_gid )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                ip_src = '192.168.%02d.1' % (in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % (out_port)
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=(in_port),
                            eth_dst=switch_mac, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expect packet
                    mac_dst = '00:00:00:22:22:%02X' % (out_port)
                    label = (out_port, 0, 1, 32)
                    exp_pkt = mpls_packet( pktlen=104, dl_vlan_enable=True, vlan_vid=(out_port), ip_ttl=63,
                            ip_src=ip_src, ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac,
                            label=[ label ] )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _24EcmpVpn( base_tests.SimpleDataPlane ):
    """  Verify MPLS IP VPN Initiation from /24 rule using ECMP  """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return
            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # add l2 interface group
                id = port
                vlan_id = id
                l2_gid, l2_msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, True )
                dst_mac[ 5 ] = vlan_id
                # add MPLS interface group
                mpls_gid, mpls_msg = add_mpls_intf_group( self.controller, l2_gid, dst_mac, intf_src_mac,
                        vlan_id, id )
                # add MPLS L3 VPN group
                mpls_label_gid, mpls_label_msg = add_mpls_label_group( self.controller,
                        subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, index=id, ref_gid=mpls_gid,
                        push_mpls_header=True, set_mpls_label=port, set_bos=1, set_ttl=32 )
                ecmp_msg = add_l3_ecmp_group( self.controller, id, [ mpls_label_gid ] )
                do_barrier( self.controller )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, vrf=0,
                        flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add routing flow
                dst_ip = dip + (vlan_id << 8)
                # add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0, mpls_label_gid, vrf=2)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffff00, ecmp_msg.group_id,
                        vrf=0 )
                Groups._put( l2_gid )
                Groups._put( mpls_gid )
                Groups._put( mpls_label_gid )
                Groups._put( ecmp_msg.group_id )

            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                mac_src = '00:00:00:22:22:%02X' % (in_port)
                ip_src = '192.168.%02d.1' % (in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % (out_port)
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=(in_port),
                            eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expect packet
                    mac_dst = '00:00:00:22:22:%02X' % out_port
                    label = (out_port, 0, 1, 32)
                    exp_pkt = mpls_packet( pktlen=104, dl_vlan_enable=True, vlan_vid=(out_port), ip_ttl=63,
                            ip_src=ip_src, ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac,
                            label=[ label ] )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class FloodGroupMod( base_tests.SimpleDataPlane ):
    """ Modify referenced group test """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            ports = sorted( config[ "port_map" ].keys( ) )
            vlan_id = 1

            for port in ports:
                L2gid, l2msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, False )
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                Groups.put( L2gid )

            msg = add_l2_flood_group( self.controller, ports, vlan_id, vlan_id )
            Groups.put( msg.group_id )
            add_bridge_flow( self.controller, None, vlan_id, msg.group_id, True )
            do_barrier( self.controller )
            # verify flood
            for ofport in ports:
                # change dest based on port number
                mac_src = '00:12:34:56:78:%02X' % ofport
                parsed_pkt = simple_tcp_packet_two_vlan( pktlen=108, out_dl_vlan_enable=True,
                        out_vlan_vid=vlan_id, in_dl_vlan_enable=True, in_vlan_vid=10,
                        eth_dst='00:12:34:56:78:9a', eth_src=mac_src )
                pkt = str( parsed_pkt )
                self.dataplane.send( ofport, pkt )
                # self won't rx packet
                verify_no_packet( self, pkt, ofport )
                # others will rx packet
                tmp_ports = list( ports )
                tmp_ports.remove( ofport )
                verify_packets( self, pkt, tmp_ports )
            verify_no_other_packets( self )
            msg = mod_l2_flood_group( self.controller, [ ports[ 0 ] ], vlan_id, vlan_id )
            mac_src = '00:12:34:56:78:%02X' % ports[ 1 ]
            parsed_pkt = simple_tcp_packet_two_vlan( pktlen=108, out_dl_vlan_enable=True,
                    out_vlan_vid=vlan_id, in_dl_vlan_enable=True, in_vlan_vid=10, eth_dst='00:12:34:56:78:9a',
                    eth_src=mac_src )
            pkt = str( parsed_pkt )
            self.dataplane.send( ports[ 1 ], pkt )
            verify_packets( self, pkt, [ ports[ 0 ] ] )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _24ECMPL3( base_tests.SimpleDataPlane ):
    """ Verifies /24 IP routing using ECMP """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            # Hashes Test Name and uses it as id for installing unique groups
            ports = config[ "port_map" ].keys( )
            for port in ports:
                vlan_id = port
                id = port
                # add l2 interface group
                l2_gid, msg = add_one_l2_interface_group( self.controller, port, vlan_id=vlan_id,
                        is_tagged=True, send_barrier=False )
                dst_mac[ 5 ] = vlan_id
                l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id, id=id,
                        src_mac=intf_src_mac, dst_mac=dst_mac )
                ecmp_msg = add_l3_ecmp_group( self.controller, id, [ l3_msg.group_id ] )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add unicast routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffff00, ecmp_msg.group_id )
                Groups._put( l2_gid )
                Groups._put( l3_msg.group_id )
                Groups._put( ecmp_msg.group_id )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                mac_src = '00:00:00:22:22:%02X' % in_port
                ip_src = '192.168.%02d.1' % in_port
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % out_port
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=in_port,
                            eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expected packet
                    mac_dst = '00:00:00:22:22:%02X' % out_port
                    exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=out_port,
                            eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


@disabled
class MPLSBUG( base_tests.SimpleDataPlane ):
    def runTest( self ):
        if len( config[ "port_map" ] ) < 2:
            logging.info( "Port count less than 2, can't run this case" )
            return
        intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
        dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
        dip = 0xc0a80001
        Groups = Queue.LifoQueue( )
        ports = config[ "port_map" ].keys( )
        for port in ports:
            # add l2 interface group
            vlan_id = port
            l2_gid, l2_msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, False )
            dst_mac[ 5 ] = vlan_id
            # add L3 Unicast  group
            l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id, id=vlan_id,
                    src_mac=intf_src_mac, dst_mac=dst_mac )
            # add vlan flow table
            add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_BOTH )
            # add termination flow
            add_termination_flow( self.controller, port, 0x8847, intf_src_mac, vlan_id, goto_table=24 )
            # add mpls flow
            add_mpls_flow( self.controller, l3_msg.group_id, port )
            # add termination flow
            add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
            # add unicast routing flow
            dst_ip = dip + (vlan_id << 8)
            add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffffff, l3_msg.group_id )
            Groups._put( l2_gid )
            Groups._put( l3_msg.group_id )
        do_barrier( self.controller )

        switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
        for in_port in ports:
            mac_src = '00:00:00:22:22:%02X' % in_port
            ip_src = '192.168.%02d.1' % in_port
            for out_port in ports:
                if in_port == out_port:
                    continue
                ip_dst = '192.168.%02d.1' % out_port
                switch_mac = "00:00:00:cc:cc:cc"
                label = (out_port, 0, 1, 32)
                parsed_pkt = mpls_packet( pktlen=104, dl_vlan_enable=True, vlan_vid=in_port, ip_src=ip_src,
                        ip_dst=ip_dst, eth_dst=switch_mac, eth_src=mac_src, label=[ label ] )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )

                # build expect packet
                mac_dst = '00:00:00:22:22:%02X' % out_port
                exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=out_port,
                        eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=31, ip_src=ip_src, ip_dst=ip_dst )
                pkt = str( exp_pkt )
                verify_packet( self, pkt, out_port )
                verify_no_other_packets( self )

                parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=in_port,
                        eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )
                # build expected packet
                mac_dst = '00:00:00:22:22:%02X' % out_port
                exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=out_port,
                        eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, ip_src=ip_src, ip_dst=ip_dst )
                pkt = str( exp_pkt )
                verify_packet( self, pkt, out_port )
                verify_no_other_packets( self )
        delete_all_flows( self.controller )
        delete_groups( self.controller, Groups )

class L3McastToL3( base_tests.SimpleDataPlane ):
    """
    Mcast routing, in this test case the traffic comes in tagged.
    port+1 is used as ingress vlan_id. The packet goes out tagged on
    different ports. 4094-port is used as egress vlan_id.
    """
    def runTest( self ):
        """
        port1 (vlan 300)-> All Ports (vlan 300)
        """
        Groups = Queue.LifoQueue( )
        try:
        # We can forward on the in_port but egress_vlan has to be different from ingress_vlan
            if len( config[ "port_map" ] ) < 1:
                logging.info( "Port count less than 1, can't run this case" )
                assert (False)
                return
            ports      = config[ "port_map" ].keys( )
            dst_ip_str = "224.0.0.1"
            (
                port_to_in_vlan,
                port_to_out_vlan,
                port_to_src_mac_str,
                port_to_dst_mac_str,
                port_to_src_ip_str,
                port_to_intf_src_mac_str,
                Groups) = fill_mcast_pipeline_L3toL3(
                self.controller,
                logging,
                ports,
                is_ingress_tagged   = True,
                is_egress_tagged    = True,
                is_vlan_translated  = True,
                is_max_vlan         = False
                )

            for in_port in ports:

                parsed_pkt = simple_udp_packet(
                    pktlen         = 100,
                    dl_vlan_enable = True,
                    vlan_vid       = port_to_in_vlan[in_port],
                    eth_dst        = port_to_dst_mac_str[in_port],
                    eth_src        = port_to_src_mac_str[in_port],
                    ip_ttl         = 64,
                    ip_src         = port_to_src_ip_str[in_port],
                    ip_dst         = dst_ip_str
                    )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )

                for out_port in ports:

                    parsed_pkt = simple_udp_packet(
                        pktlen         = 100,
                        dl_vlan_enable = True,
                        vlan_vid       = port_to_out_vlan[out_port],
                        eth_dst        = port_to_dst_mac_str[in_port],
                        eth_src        = port_to_intf_src_mac_str[out_port],
                        ip_ttl         = 63,
                        ip_src         = port_to_src_ip_str[in_port],
                        ip_dst         = dst_ip_str
                        )
                    pkt = str( parsed_pkt )
                    verify_packet( self, pkt, out_port )

                verify_no_other_packets( self )

            parsed_pkt = simple_udp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=vlan_id,
                    eth_dst=dst_mac_str, eth_src=port1_mac_str, ip_ttl=64, ip_src=src_ip_str,
                    ip_dst=dst_ip_str )
            pkt = str( parsed_pkt )
            self.dataplane.send( port1, pkt )
            for port in config[ "port_map" ].keys( ):
                if port == port2 or port == port1:
                    verify_no_packet( self, pkt, port )
                    continue
                verify_packet( self, pkt, port )
            verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )

class L3McastToL2UntagToUntag( base_tests.SimpleDataPlane ):
    """
    Mcast routing, in this test case the traffic is untagged.
    4094 is used as internal vlan_id. The packet goes out
    untagged.
    """
    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                assert (False)
                return
            ports      = config[ "port_map" ].keys( )
            dst_ip_str = "224.0.0.1"
            (
                port_to_in_vlan,
                port_to_out_vlan,
                port_to_src_mac_str,
                port_to_dst_mac_str,
                port_to_src_ip_str,
                Groups) = fill_mcast_pipeline_L3toL2(
                self.controller,
                logging,
                ports,
                is_ingress_tagged   = False,
                is_egress_tagged    = False,
                is_vlan_translated  = False,
                is_max_vlan         = True
                )

            for in_port in ports:

                parsed_pkt = simple_udp_packet(
                    pktlen  = 96,
                    eth_dst = port_to_dst_mac_str[in_port],
                    eth_src = port_to_src_mac_str[in_port],
                    ip_ttl  = 64,
                    ip_src  = port_to_src_ip_str[in_port],
                    ip_dst  = dst_ip_str
                    )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )

                for out_port in ports:

                    parsed_pkt = simple_udp_packet(
                        pktlen  = 96,
                        eth_dst = port_to_dst_mac_str[in_port],
                        eth_src = port_to_src_mac_str[in_port],
                        ip_ttl  = 64,
                        ip_src  = port_to_src_ip_str[in_port],
                        ip_dst  = dst_ip_str
                        )
                    pkt = str( parsed_pkt )
                    if out_port == in_port:
                        verify_no_packet( self, pkt, in_port )
                        continue
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )

class L3McastToL2UntagToTag( base_tests.SimpleDataPlane ):
    """
    Mcast routing, in this test case the traffic is untagged.
    300 is used as vlan_id. The packet goes out
    tagged.
    """
    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                assert (False)
                return
            ports      = config[ "port_map" ].keys( )
            dst_ip_str = "224.0.0.1"
            (
                port_to_in_vlan,
                port_to_out_vlan,
                port_to_src_mac_str,
                port_to_dst_mac_str,
                port_to_src_ip_str,
                Groups) = fill_mcast_pipeline_L3toL2(
                self.controller,
                logging,
                ports,
                is_ingress_tagged   = False,
                is_egress_tagged    = True,
                is_vlan_translated  = False,
                is_max_vlan         = False
                )

            for in_port in ports:

                parsed_pkt = simple_udp_packet(
                    pktlen  = 96,
                    eth_dst = port_to_dst_mac_str[in_port],
                    eth_src = port_to_src_mac_str[in_port],
                    ip_ttl  = 64,
                    ip_src  = port_to_src_ip_str[in_port],
                    ip_dst  = dst_ip_str
                    )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )

                for out_port in ports:

                    parsed_pkt = simple_udp_packet(
                        pktlen          = 100,
                        dl_vlan_enable  = True,
                        vlan_vid        = port_to_out_vlan[in_port],
                        eth_dst         = port_to_dst_mac_str[in_port],
                        eth_src         = port_to_src_mac_str[in_port],
                        ip_ttl          = 64,
                        ip_src          = port_to_src_ip_str[in_port],
                        ip_dst          = dst_ip_str
                        )
                    pkt = str( parsed_pkt )
                    if out_port == in_port:
                        verify_no_packet( self, pkt, in_port )
                        continue
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class L3McastToL2TagToUntag( base_tests.SimpleDataPlane ):
    """
    Mcast routing, in this test case the traffic is tagged.
    300 is used as vlan_id. The packet goes out
    untagged.
    """
    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                assert (False)
                return
            ports      = config[ "port_map" ].keys( )
            dst_ip_str = "224.0.0.1"
            (
                port_to_in_vlan,
                port_to_out_vlan,
                port_to_src_mac_str,
                port_to_dst_mac_str,
                port_to_src_ip_str,
                Groups) = fill_mcast_pipeline_L3toL2(
                self.controller,
                logging,
                ports,
                is_ingress_tagged   = True,
                is_egress_tagged    = False,
                is_vlan_translated  = False,
                is_max_vlan         = False
                )

            for in_port in ports:

                parsed_pkt = simple_udp_packet(
                    pktlen         = 100,
                    dl_vlan_enable = True,
                    vlan_vid       = port_to_in_vlan[in_port],
                    eth_dst        = port_to_dst_mac_str[in_port],
                    eth_src        = port_to_src_mac_str[in_port],
                    ip_ttl         = 64,
                    ip_src         = port_to_src_ip_str[in_port],
                    ip_dst         = dst_ip_str
                    )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )

                for out_port in ports:

                    parsed_pkt = simple_udp_packet(
                        pktlen          = 96,
                        eth_dst         = port_to_dst_mac_str[in_port],
                        eth_src         = port_to_src_mac_str[in_port],
                        ip_ttl          = 64,
                        ip_src          = port_to_src_ip_str[in_port],
                        ip_dst          = dst_ip_str
                        )
                    pkt = str( parsed_pkt )
                    if out_port == in_port:
                        verify_no_packet( self, pkt, in_port )
                        continue
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )

class L3McastToL2TagToTag( base_tests.SimpleDataPlane ):
    """
    Mcast routing, in this test case the traffic is tagged.
    300 is used as vlan_id. The packet goes out tagged.
    """
    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                assert (False)
                return
            ports      = config[ "port_map" ].keys( )
            dst_ip_str = "224.0.0.1"
            (
                port_to_in_vlan,
                port_to_out_vlan,
                port_to_src_mac_str,
                port_to_dst_mac_str,
                port_to_src_ip_str,
                Groups) = fill_mcast_pipeline_L3toL2(
                self.controller,
                logging,
                ports,
                is_ingress_tagged   = True,
                is_egress_tagged    = True,
                is_vlan_translated  = False,
                is_max_vlan         = False
                )

            for in_port in ports:

                parsed_pkt = simple_udp_packet(
                    pktlen         = 100,
                    dl_vlan_enable = True,
                    vlan_vid       = port_to_in_vlan[in_port],
                    eth_dst        = port_to_dst_mac_str[in_port],
                    eth_src        = port_to_src_mac_str[in_port],
                    ip_ttl         = 64,
                    ip_src         = port_to_src_ip_str[in_port],
                    ip_dst         = dst_ip_str
                    )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )

                for out_port in ports:

                    parsed_pkt = simple_udp_packet(
                        pktlen         = 100,
                        dl_vlan_enable = True,
                        vlan_vid       = port_to_in_vlan[in_port],
                        eth_dst        = port_to_dst_mac_str[in_port],
                        eth_src        = port_to_src_mac_str[in_port],
                        ip_ttl         = 64,
                        ip_src         = port_to_src_ip_str[in_port],
                        ip_dst         = dst_ip_str
                        )
                    pkt = str( parsed_pkt )
                    if out_port == in_port:
                        verify_no_packet( self, pkt, in_port )
                        continue
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )

class L3McastToL2TagToTagTranslated( base_tests.SimpleDataPlane ):
    """
    Mcast routing, in this test case the traffic is tagged.
    port+1 is used as ingress vlan_id. The packet goes out
    tagged. 4094-port is used as egress vlan_id
    """
    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                assert (False)
                return
            ports      = config[ "port_map" ].keys( )
            dst_ip_str = "224.0.0.1"
            (
                port_to_in_vlan,
                port_to_out_vlan,
                port_to_src_mac_str,
                port_to_dst_mac_str,
                port_to_src_ip_str,
                Groups) = fill_mcast_pipeline_L3toL2(
                self.controller,
                logging,
                ports,
                is_ingress_tagged   = True,
                is_egress_tagged    = True,
                is_vlan_translated  = True,
                is_max_vlan         = False
                )

            for in_port in ports:

                parsed_pkt = simple_udp_packet(
                    pktlen         = 100,
                    dl_vlan_enable = True,
                    vlan_vid       = port_to_in_vlan[in_port],
                    eth_dst        = port_to_dst_mac_str[in_port],
                    eth_src        = port_to_src_mac_str[in_port],
                    ip_ttl         = 64,
                    ip_src         = port_to_src_ip_str[in_port],
                    ip_dst         = dst_ip_str
                    )
                pkt = str( parsed_pkt )
                self.dataplane.send( in_port, pkt )

                for out_port in ports:

                    parsed_pkt = simple_udp_packet(
                        pktlen         = 100,
                        dl_vlan_enable = True,
                        vlan_vid       = port_to_out_vlan[in_port],
                        eth_dst        = port_to_dst_mac_str[in_port],
                        eth_src        = port_to_src_mac_str[in_port],
                        ip_ttl         = 64,
                        ip_src         = port_to_src_ip_str[in_port],
                        ip_dst         = dst_ip_str
                        )
                    pkt = str( parsed_pkt )
                    if out_port == in_port:
                        verify_no_packet( self, pkt, in_port )
                        continue
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _MplsFwd( base_tests.SimpleDataPlane ):
    """ Verify basic MPLS forwarding: Label switch router """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return
            dip = 0xc0a80001
            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            # Assigns unique hardcoded test_id to make sure tests don't overlap when writing rules
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # Shift MPLS label and VLAN ID by 16 to avoid reserved values
                vlan_id = port + 16
                mpls_label = port + 16

                # add l2 interface group
                id = port
                l2_gid, l2_msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, False )
                dst_mac[ 5 ] = port
                mpls_gid, mpls_msg = add_mpls_intf_group( self.controller, l2_gid, dst_mac, intf_src_mac,
                        vlan_id, id )
                mpls_label_gid, mpls_label_msg = add_mpls_label_group( self.controller,
                        subtype=OFDPA_MPLS_GROUP_SUBTYPE_SWAP_LABEL, index=id, ref_gid=mpls_gid,
                        push_mpls_header=False, set_mpls_label=mpls_label, set_bos=1 )
                ecmp_gid, ecmp_msg = add_mpls_forwarding_group( self.controller,
                        subtype=OFDPA_MPLS_GROUP_SUBTYPE_ECMP, index=id, ref_gids=[mpls_label_gid] )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x8847, intf_src_mac, vlan_id, goto_table=24 )
                #add_mpls_flow( self.controller, ecmp_gid, port, goto_table=29 )
                add_mpls_flow( self.controller, mpls_label_gid, mpls_label, goto_table=29 )
                dst_ip = dip + (vlan_id << 8)
                Groups._put( l2_gid )
                Groups._put( mpls_gid )
                Groups._put( mpls_label_gid )
                Groups._put( ecmp_gid )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                ip_src = '192.168.%02d.1' % (in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue

                    # Shift MPLS label and VLAN ID by 16 to avoid reserved values
                    out_mpls_label = out_port + 16
                    in_vlan_vid = in_port + 16
                    out_vlan_vid = out_port + 16

                    ip_dst = '192.168.%02d.1' % (out_port)
                    label = (out_mpls_label, 0, 1, 32)
                    parsed_pkt = mpls_packet( pktlen=104, dl_vlan_enable=True, vlan_vid=(in_vlan_vid),
                            ip_src=ip_src, ip_dst=ip_dst, eth_dst=switch_mac, label=[ label ] )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )

                    # build expect packet
                    mac_dst = '00:00:00:22:22:%02X' % (out_port)
                    label = (out_mpls_label, 0, 1, 31)
                    exp_pkt = mpls_packet( pktlen=104, dl_vlan_enable=True, vlan_vid=(out_vlan_vid),
                            ip_src=ip_src, ip_dst=ip_dst, eth_src=switch_mac, eth_dst=mac_dst,
                            label=[ label ] )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _MplsTermination( base_tests.SimpleDataPlane ):
    """ Verify MPLS VPN Termination at penultimate hop """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return
            dip = 0xc0a80001
            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            # Assigns unique hardcoded test_id to make sure tests don't overlap when writing rules
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # Shift MPLS label and VLAN ID by 16 to avoid reserved values
                vlan_id = port + 16
                mpls_label = port + 16

                # add l2 interface group
                id, dst_mac[ 5 ] = port, port
                l2_gid, l2_msg = add_one_l2_interface_group( self.controller, port, vlan_id, True, False )
                # add L3 Unicast  group
                l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id, id=id,
                        src_mac=intf_src_mac, dst_mac=dst_mac )
                # add L3 ecmp group
                ecmp_msg = add_l3_ecmp_group( self.controller, id, [ l3_msg.group_id ] )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x8847, intf_src_mac, vlan_id, goto_table=24 )
                add_mpls_flow( self.controller, ecmp_msg.group_id, mpls_label )
                # add_mpls_flow(self.controller, label=port)
                dst_ip = dip + (vlan_id << 8)
                # add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffff00,
                #                         ecmp_msg.group_id, 1)
                Groups._put( l2_gid )
                Groups._put( l3_msg.group_id )
                Groups._put( ecmp_msg.group_id )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                ip_src = '192.168.%02d.1' % (in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue

                    # Shift MPLS label and VLAN ID by 16 to avoid reserved values
                    out_mpls_label = out_port + 16
                    in_vlan_vid = in_port + 16
                    out_vlan_vid = out_port + 16

                    ip_dst = '192.168.%02d.1' % (out_port)
                    label = (out_mpls_label, 0, 1, 32)
                    parsed_pkt = mpls_packet( pktlen=104, dl_vlan_enable=True, vlan_vid=(in_vlan_vid),
                            ip_src=ip_src, ip_dst=ip_dst, eth_dst=switch_mac, label=[ label ] )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expect packet
                    mac_dst = '00:00:00:22:22:%02X' % (out_port)
                    exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=(out_vlan_vid),
                            eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=31, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _24UcastTagged( base_tests.SimpleDataPlane ):
    """ Verify /24 IP forwarding to L3 Interface """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            test_id = 26
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return
            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # add l2 interface group
                vlan_id = port + test_id
                l2gid, msg = add_one_l2_interface_group( self.controller, port, vlan_id=vlan_id,
                        is_tagged=True, send_barrier=False )
                dst_mac[ 5 ] = vlan_id
                l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id, id=vlan_id,
                        src_mac=intf_src_mac, dst_mac=dst_mac )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add unicast routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffff00, l3_msg.group_id )
                Groups.put( l2gid )
                Groups.put( l3_msg.group_id )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                mac_src = '00:00:00:22:22:%02X' % (test_id + in_port)
                ip_src = '192.168.%02d.1' % (test_id + in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % (test_id + out_port)
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True,
                            vlan_vid=(test_id + in_port), eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64,
                            ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expected packet
                    mac_dst = '00:00:00:22:22:%02X' % (test_id + out_port)
                    exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True,
                            vlan_vid=(test_id + out_port), eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63,
                            ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class _0Ucast( base_tests.SimpleDataPlane ):
    """  Verify default gateway IP forwarding to L3 Interface ( /0 rule ) """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            ports = config[ "port_map" ].keys( )
            for port in ports:
                # add l2 interface group
                vlan_id = port
                l2gid, msg = add_one_l2_interface_group( self.controller, port, vlan_id=vlan_id + 1,
                        is_tagged=True, send_barrier=False )
                dst_mac[ 5 ] = vlan_id
                l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id + 1, id=vlan_id,
                        src_mac=intf_src_mac, dst_mac=dst_mac )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add unicast routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffffff, l3_msg.group_id )
                Groups.put( l2gid )
                Groups.put( l3_msg.group_id )
            l3_gid = encode_l3_unicast_group_id( ports[ 0 ] )
            dst_ip = 0x0
            add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0x0, l3_gid )
            do_barrier( self.controller )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            for in_port in ports:
                mac_src = '00:00:00:22:22:%02X' % (in_port)
                ip_src = '192.168.%02d.1' % (in_port)
                for out_port in ports:
                    if in_port == out_port:
                        continue
                    ip_dst = '192.168.%02d.1' % (out_port)
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=(in_port),
                            eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expected packet
                    mac_dst = '00:00:00:22:22:%02X' % (out_port)
                    exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=(out_port + 1),
                            eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, out_port )
                    verify_no_other_packets( self )
                    ip_dst = '1.168.%02d.1' % ports[ 0 ]
                    parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=in_port,
                            eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst )
                    pkt = str( parsed_pkt )
                    self.dataplane.send( in_port, pkt )
                    # build expect packet
                    mac_dst = '00:00:00:22:22:%02X' % ports[ 0 ]
                    exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=ports[ 0 ] + 1,
                            ip_ttl=63, ip_src=ip_src, ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac )
                    pkt = str( exp_pkt )
                    verify_packet( self, pkt, ports[ 0 ] )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )


class Unfiltered( base_tests.SimpleDataPlane ):
    """
    Attempt to add an unfiltered group: [ATTENTION] this doesn't verify addition
    """

    def runTest( self ):
        try:
            ports = sorted( config[ "port_map" ].keys( ) )
            vlan_id = 1;
            for port in ports:
                add_l2_unfiltered_group( self.controller, [ port ], False )
            do_barrier( self.controller )
        finally:
            delete_all_flows( self.controller )
            delete_all_groups( self.controller )


class L3McastToVPN( base_tests.SimpleDataPlane ):
    """
    Mcast routing and VPN initiation
    """

    def runTest( self ):
        """
        port1 (vlan 1)-> port 2 (vlan 2)
        """
        try:
            delete_all_flows( self.controller )
            delete_all_groups( self.controller )

            if len( config[ "port_map" ] ) < 3:
                logging.info( "Port count less than 3, can't run this case" )
                assert (False)
                return

            vlan_id = 1
            port2_out_vlan = 2
            port3_out_vlan = 3
            in_vlan = 1  # macast group vid shall use input vlan diffe from l3 interface use output vlan
            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            dst_mac = [ 0x01, 0x00, 0x5e, 0x01, 0x01, 0x01 ]
            dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] )
            port1_mac = [ 0x00, 0x11, 0x11, 0x11, 0x11, 0x11 ]
            port1_mac_str = ':'.join( [ '%02X' % x for x in port1_mac ] )
            src_ip = 0xc0a80101
            src_ip_str = "192.168.1.1"
            dst_ip = 0xe0010101
            dst_ip_str = "224.1.1.1"

            port1 = config[ "port_map" ].keys( )[ 0 ]
            port2 = config[ "port_map" ].keys( )[ 1 ]
            # port3=config["port_map"].keys()[2]

            # add l2 interface group
            for port in config[ "port_map" ].keys( ):
                add_one_l2_interface_group( self.controller, port, vlan_id=vlan_id, is_tagged=False,
                        send_barrier=False )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                vlan_id += 1

                # add termination flow
            add_termination_flow( self.controller, port1, 0x0800, [ 0x01, 0x00, 0x5e, 0x00, 0x00, 0x00 ],
                    vlan_id )

            # add MPLS interface group
            l2_gid = encode_l2_interface_group_id( port2_out_vlan, port2 )
            mpls_gid2, mpls_msg = add_mpls_intf_group( self.controller, l2_gid, dst_mac, intf_src_mac,
                    port2_out_vlan, port2 )
            # l2_gid3 = encode_l2_interface_group_id(port3_out_vlan, port3)
            # mpls_gid3, mpls_msg = add_mpls_intf_group(self.controller, l2_gid3, dst_mac, intf_src_mac, port3_out_vlan, port3)
            # add L3VPN groups
            mpls_label_gid2, mpls_label_msg = add_mpls_label_group( self.controller,
                    subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, index=(0x20000 + port2), ref_gid=mpls_gid2,
                    push_mpls_header=True, set_mpls_label=port2, set_bos=1, cpy_ttl_outward=True )
            # mpls_label_gid3, mpls_label_msg = add_mpls_label_group(self.controller, subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL,
            #                                                       index=(0x10000+port3), ref_gid= mpls_gid3, push_mpls_header=True, set_mpls_label=port3, set_bos=1, cpy_ttl_outward=True)

            mcat_group_msg = add_l3_mcast_group( self.controller, in_vlan, 2, [ mpls_label_gid2 ] )
            add_mcast4_routing_flow( self.controller, in_vlan, src_ip, 0, dst_ip, mcat_group_msg.group_id )

            parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=1, eth_dst=dst_mac_str,
                    eth_src=port1_mac_str, ip_ttl=64, ip_src=src_ip_str, ip_dst=dst_ip_str )
            pkt = str( parsed_pkt )
            self.dataplane.send( port1, pkt )
            label = (12, 0, 1, 63)
            exp_pkt = mpls_packet( pktlen=100, eth_dst=dst_mac_str, eth_src=intf_src_mac_str, ip_ttl=64,
                    ip_src=src_ip_str, label=[ label ], ip_dst=dst_ip_str )
            pkt = str( exp_pkt )
            verify_packet( self, pkt, port2 )
            # verify_packet(self, pkt, port3)
            verify_no_other_packets( self )
            delete_all_groups( self.controller )
        finally:
            delete_all_flows( self.controller )
            delete_all_groups( self.controller )


class PacketInSrcMacMiss( base_tests.SimpleDataPlane ):
    """
    Test packet in function on a src-mac miss
    Send a packet to each dataplane port and verify that a packet
    in message is received from the controller for each
    #todo verify you stop receiving after adding rule
    """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            ports = sorted( config[ "port_map" ].keys( ) )

            Groups = Queue.LifoQueue( )
            for port in ports:
                L2gid, l2msg = add_one_l2_interface_group( self.controller, port, 1, True, False )
                add_one_vlan_table_flow( self.controller, port, 1, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                Groups.put( L2gid )
            parsed_vlan_pkt = simple_tcp_packet( pktlen=104, vlan_vid=0x1001, dl_vlan_enable=True )
            vlan_pkt = str( parsed_vlan_pkt )
            for of_port in config[ "port_map" ].keys( ):
                logging.info( "PacketInMiss test, port %d", of_port )
                self.dataplane.send( of_port, vlan_pkt )
                verify_packet_in( self, vlan_pkt, of_port, ofp.OFPR_NO_MATCH )
                verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_all_groups( self.controller )


class EcmpGroupMod( base_tests.SimpleDataPlane ):
    """
        Verify referenced group can be modified adding or removing buckets
        Attention the hashing behavior may vary according to your porting assigment
        Current values are hardcoded for our topology
    """

    def runTest( self ):
        Groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc ]
            dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ]
            dip = 0xc0a80001
            # Hashes Test Name and uses it as id for installing unique groups
            ports = config[ "port_map" ].keys( )
            ecmp = [ ]
            for port in ports:
                vlan_id = port
                id = port
                # add l2 interface group
                l2_gid, msg = add_one_l2_interface_group( self.controller, port, vlan_id=vlan_id,
                        is_tagged=True, send_barrier=False )
                dst_mac[ 5 ] = vlan_id
                l3_msg = add_l3_unicast_group( self.controller, port, vlanid=vlan_id, id=id,
                        src_mac=intf_src_mac, dst_mac=dst_mac )
                ecmp += [ l3_msg.group_id ]
                Groups._put( l2_gid )
                Groups._put( l3_msg.group_id )
                ecmp_msg = add_l3_ecmp_group( self.controller, ports[ 0 ], [ l3_msg.group_id ] )
                # add vlan flow table
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                # add termination flow
                add_termination_flow( self.controller, port, 0x0800, intf_src_mac, vlan_id )
                # add unicast routing flow
                dst_ip = dip + (vlan_id << 8)
                add_unicast_routing_flow( self.controller, 0x0800, dst_ip, 0xffffff00, ecmp_msg.group_id )
                Groups._put( ecmp_msg.group_id )
            mod_l3_ecmp_group( self.controller, ports[ 0 ], ecmp )

            switch_mac = ':'.join( [ '%02X' % x for x in intf_src_mac ] )
            parsed_pkt = exp_pkt = 0
            for out_port in ports:
                mac_src = '00:00:00:22:22:%02X' % ports[ 0 ]
                ip_src = '192.168.%02d.%02d' % (ports[ 0 ], 1)
                ip_dst = '192.168.%02d.%02d' % (ports[ 1 ], 1)
                tcp = out_port if out_port == 24 else 25
                parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=ports[ 0 ],
                        eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst,
                        tcp_dport=tcp )
                pkt = str( parsed_pkt )
                self.dataplane.send( ports[ 0 ], pkt )
                # build expected packet
                mac_dst = '00:00:00:22:22:%02X' % out_port
                exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=out_port,
                        eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, ip_src=ip_src, ip_dst=ip_dst,
                        tcp_dport=tcp )
                pkt = str( exp_pkt )
                verify_packet( self, pkt, out_port )
                verify_no_other_packets( self )
            l3_gid = encode_l3_unicast_group_id( ports[ 0 ] )
            mod_l3_ecmp_group( self.controller, ports[ 0 ], [ l3_gid ] )
            for port in ports:
                mac_src = '00:00:00:22:22:%02X' % ports[ 0 ]
                ip_src = '192.168.%02d.%02d' % (ports[ 0 ], 1)
                ip_dst = '192.168.%02d.%02d' % (ports[ 1 ], 1)
                tcp = port if port == 24 else 25
                parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=ports[ 0 ],
                        eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst,
                        tcp_dport=tcp )
                pkt = str( parsed_pkt )
                self.dataplane.send( ports[ 0 ], pkt )
                # build expected packet
                mac_dst = '00:00:00:22:22:%02X' % ports[ 0 ]
                exp_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=ports[ 0 ],
                        eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, ip_src=ip_src, ip_dst=ip_dst,
                        tcp_dport=tcp )
                pkt = str( exp_pkt )
                verify_packet( self, pkt, ports[ 0 ] )
                verify_no_other_packets( self )
            mod_l3_ecmp_group( self.controller, ports[ 0 ], [ ] )
            for port in ports:
                mac_src = '00:00:00:22:22:%02X' % ports[ 0 ]
                ip_src = '192.168.%02d.%02d' % (ports[ 0 ], 1)
                ip_dst = '192.168.%02d.%02d' % (ports[ 1 ], 1)
                tcp = port if port == 24 else 25
                parsed_pkt = simple_tcp_packet( pktlen=100, dl_vlan_enable=True, vlan_vid=ports[ 0 ],
                        eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, ip_dst=ip_dst,
                        tcp_dport=tcp )
                pkt = str( parsed_pkt )
                self.dataplane.send( ports[ 0 ], pkt )
                verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, Groups )
            delete_all_groups( self.controller )

class Untagged( base_tests.SimpleDataPlane ):
    """
        Verify VLAN filtering table does not require OFPVID_PRESENT bit to be 0.
        This should be fixed in OFDPA 2.0 GA and above, the test fails with
        previous versions of the OFDPA.

        Two rules are necessary in VLAN table (10):
        1) Assignment: match 0x0000/(no mask), set_vlan_vid 0x100A, goto 20
        2) Filtering: match 0x100A/0x1FFF, goto 20

        In this test case vlan_id = (MAX_INTERNAL_VLAN - port_no).
        The remaining part of the test is based on the use of the bridging table
    """

    MAX_INTERNAL_VLAN = 4094

    def runTest( self ):
        groups = Queue.LifoQueue( )
        try:
            if len( config[ "port_map" ] ) < 2:
                logging.info( "Port count less than 2, can't run this case" )
                return

            ports = sorted( config[ "port_map" ].keys( ) )
            for port in ports:
                vlan_id = Untagged.MAX_INTERNAL_VLAN - port
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG )
                add_one_vlan_table_flow( self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_UNTAG )
                for other_port in ports:
                    if other_port == port:
                        continue
                    L2gid, l2msg = add_one_l2_interface_group( self.controller, other_port, vlan_id, False, False )
                    groups.put( L2gid )
                    add_bridge_flow( self.controller, [ 0x00, 0x12, 0x34, 0x56, 0x78, other_port ], vlan_id, L2gid, True )

            do_barrier( self.controller )

            for out_port in ports:
                # change dest based on port number
                mac_dst = '00:12:34:56:78:%02X' % out_port
                for in_port in ports:
                    if in_port == out_port:
                        continue
                    pkt = str( simple_tcp_packet( eth_dst=mac_dst ) )
                    self.dataplane.send( in_port, pkt )
                    for ofport in ports:
                        if ofport in [ out_port ]:
                            verify_packet( self, pkt, ofport )
                        else:
                            verify_no_packet( self, pkt, ofport )
                    verify_no_other_packets( self )
        finally:
            delete_all_flows( self.controller )
            delete_groups( self.controller, groups )
            delete_all_groups( self.controller )