Updated clone instructions
diff --git a/README b/README
index 5d1b5c5..ea5b7a4 100644
--- a/README
+++ b/README
@@ -1,5 +1,6 @@
OpenFlow Testing Framework
July, 2010
+Last updated March 2012
Copyright (c) 2010 The Board of Trustees of The Leland Stanford
Junior University
@@ -30,7 +31,7 @@
You can check out OFTest with git with the following command:
- git clone git://openflow.org/oftest
+ git clone git://github.com/floodlight/oftest
Introduction
++++++++++++
@@ -62,15 +63,15 @@
Currently, switches must be running version 1.0 of OpenFlow.
- # git clone yuba:/usr/local/git/openflow-projects/oftest
+ # git clone git://github.com/floodlight/oftest
# cd oftest/tools/munger
# make install
# cd ../../tests
Make sure the switch you want to test is running --
see (4) below for the reference switch example.
# ./oft --list
- # sudo ./oft
- # sudo ./oft --verbose --log-file=""
+ # sudo ./oft --test-spec=Echo
+ # sudo ./oft --verbose --log-file=""
# sudo ./oft --test-spec=<mod> --platform=remote --host=...
Longer Start
@@ -81,8 +82,8 @@
* Root privilege on host running oft
* Switch running OpenFlow 1.0 and attempting to connect
to a controller on the machine running oft.
- * Python 2.5. You can run platforms using eth interfaces
- with Python 2.4.
+ * Python 2.5 or 2.6. You can run platforms using eth interfaces
+ with Python 2.4. Python 2.7 may work.
* Python setup tools (e.g.: sudo apt-get install python-setuptools)
* oftest checked out (called <oftest> here)
* scapy installed: http://www.secdev.org/projects/scapy/
@@ -139,6 +140,10 @@
4F. To clean up the virtual ethernet interfaces, use
sudo rmmod veth
+ New tools allow you to run an OVS instance as well. See
+ oftest/tools/ovs-ctl. You will need to install a version of
+ openvswitch. See http://openvswitch.org/.
+
5. Run oft
See Warning above; requires sudo to control the dataplane
cd <oftest>/tests