diff --git a/Detailed_Testing_Methodology.txt b/Detailed_Testing_Methodology.txt
index eda3daa..34922cc 100644
--- a/Detailed_Testing_Methodology.txt
+++ b/Detailed_Testing_Methodology.txt
@@ -993,7 +993,7 @@
 Test Description: Verify that packet_count in the Flow_Stats reply increments in accordance with the packets in flow  
 
 Test mode: Automated
-Test Tile: FlowCounter1
+Test Tile: PktPerFlow
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1014,7 +1014,7 @@
 Test Description: Verify that byte_count in the Flow_Stats reply increments in accordance with the bytes in flow  
 
 Test mode: Automated
-Test Tile: FlowCounter1
+Test Tile: BytPerFlow
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1035,7 +1035,7 @@
 Test Description: Verify that duration_sec in the Flow_Stats reply increments in accordance with the time that flow was alive in sec 
 
 Test mode: Automated
-Test Tile: FlowCounter2
+Test Tile: DurationPerFlow
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1056,7 +1056,7 @@
 beyond duration_sec.
 
 Test mode: Automated
-Test Tile: FlowCounter2
+Test Tile: DurationPerFlow
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1077,7 +1077,7 @@
 Test Description: Verify that rx_packets in the Port_Stats reply increments in accordance with the packets recieved on that port
 
 Test mode: Automated
-Test Tile: PortCounter1
+Test Tile: RxPktPerPort
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1099,7 +1099,7 @@
 Test Description: Verify that tx_packets in the Port_Stats reply increments in accordance with the packets transmitted from a port  
 
 Test mode: Automated
-Test Tile: PortCounter2
+Test Tile: TxPktPerPort
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1120,7 +1120,7 @@
 Test Description: Verify that rx_bytes in the Port_Stats reply increments in accordance with the bytes recieved on a port  
 
 Test mode: Automated
-Test Tile: PortCounter3
+Test Tile: RxBytPerPort
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1141,7 +1141,7 @@
 Test Description: Verify that tx_bytes in the Port_Stats reply increments in accordance with the bytes transmitted from a port  
 
 Test mode: Automated
-Test Tile: PortCounter4
+Test Tile: TxBytPerPort
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1314,7 +1314,7 @@
 Test Description: Verify that active_count in the table increments in accordance with the flows inserted in the table
 
 Test mode: Automated
-Test Tile: TableCounter1
+Test Tile: ActiveCount
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1334,7 +1334,7 @@
 Test Description: Verify that lookup_count in the Table_Stats reply increments in accordance with the number of packets looked up in table
 
 Test mode: Automated
-Test Tile: TableCounter2
+Test Tile: LookupMatchedCount
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1355,7 +1355,7 @@
 Test Description: Verify that matched_count in the Table_Stats reply increments in accordance with the number of packets matched with the table
 
 Test mode: Automated
-Test Tile: TableCounter2
+Test Tile: LookupMatchedCount
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Mandatory
@@ -1377,7 +1377,7 @@
 Test Description: Verify that tx_packets in the queue_stats reply increments in accordance with the number of transmitted packets
 
 Test mode: Automated
-Test Tile: QueueCounter1
+Test Tile: TxPktPerQueue
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Optional
@@ -1401,7 +1401,7 @@
 Test Description: Verify that tx_bytes in the queue_stats reply increments in accordance with the number of transmitted bytes
 
 Test mode: Automated
-Test Tile: QueueCounter2
+Test Tile: TxBytPerQueue
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Optional
@@ -1423,7 +1423,7 @@
 
 Test Description: Verify that tx_errors in the queue_stats reply increments in accordance with the number of packets dropped due to overrun.
 Test mode: Automated
-Test Tile: QueueCounter3
+Test Tile: TxErrorPerQueue
 POrts: 3 (1 Control Plane 2 Data Plane)
 Initial State: Default (Clear switch state), Connection setup
 Test-Field: Optional