| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 1 | """
|
| 2 | Flow Test
|
| 3 |
|
| 4 | Test each flow table can set entry, and packet rx correctly.
|
| 5 | """
|
| 6 |
|
| 7 | import logging
|
| 8 |
|
| 9 | from oftest import config
|
| 10 | import oftest.base_tests as base_tests
|
| 11 | import ofp
|
| 12 | from oftest.testutils import *
|
| 13 | from accton_util import *
|
| 14 | import oftest.parse as decode
|
| 15 |
|
| 16 | class VxlanConfigNetconf(base_tests.SimpleDataPlane):
|
| 17 | """
|
| 18 | Verify netconf to configure Vxlan port
|
| 19 | """
|
| 20 | def runTest(self):
|
| 21 | if config["switch_ip"] == None:
|
| 22 | logging.error("Doesn't configure switch IP")
|
| 23 | return
|
| 24 |
|
| macauley_cheng | 681958a | 2015-11-11 10:32:05 +0800 | [diff] [blame] | 25 | delete_all_flows(self.controller)
|
| 26 | delete_all_groups(self.controller)
|
| 27 |
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 28 | #paramaters
|
| 29 | access_port_vid=1
|
| 30 | access_phy_port=1
|
| 31 | access_lport=0x10001
|
| 32 | vnid=103
|
| 33 | next_hop_id=1
|
| 34 | next_hop_id_mcast=2
|
| 35 | dst_mac="00:00:11:22:22:11"
|
| 36 | mcast_ipv4="224.1.1.1"
|
| 37 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 38 | network_port_phy_port=2
|
| 39 | network_lport=0x10002
|
| 40 | network_port_vlan=2
|
| 41 | network_port_sip="192.168.1.1"
|
| 42 | network_port_dip="192.168.2.1"
|
| 43 |
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 44 | xml_before=get_edit_config(config["switch_ip"])
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 45 | #get datapath_id from feature message
|
| 46 | feature_reply=get_featureReplay(self)
|
| 47 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 48 | dst_mac=dst_mac_mcast,
|
| 49 | phy_port=network_port_phy_port,
|
| 50 | vlan=network_port_vlan)
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 51 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id_mcast, dst_mac_mcast, network_port_phy_port, network_port_vlan);
|
| 52 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 53 |
|
| 54 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 55 | dst_mac=dst_mac,
|
| 56 | phy_port=network_port_phy_port,
|
| 57 | vlan=network_port_vlan)
|
| 58 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 59 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 60 |
|
| 61 | vni_config_xml=get_vni_config_xml(vni_id=vnid,
|
| 62 | mcast_ipv4=mcast_ipv4,
|
| 63 | next_hop_id=next_hop_id_mcast)
|
| 64 | logging.info("config VNI %lx", vnid);
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 65 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 66 |
|
| 67 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 68 | lport=access_lport, phy_port=access_phy_port,
|
| 69 | vlan=access_port_vid, vnid=vnid)
|
| 70 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport, access_phy_port, access_port_vid, vnid);
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 71 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 72 |
|
| 73 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 74 | lport=network_lport,
|
| 75 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 76 | next_hop_id=next_hop_id,
|
| 77 | vnid=vnid)
|
| 78 | logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id);
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 79 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 80 |
|
| 81 | get_edit_config(config["switch_ip"])
|
| 82 |
|
| 83 | #exit verification so clear all configuration
|
| 84 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 85 | lport=access_lport, phy_port=access_phy_port,
|
| 86 | vlan=access_port_vid, vnid=vnid, operation="delete")
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 87 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 88 |
|
| 89 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 90 | lport=network_lport,
|
| 91 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 92 | next_hop_id=next_hop_id,
|
| 93 | vnid=vnid, operation="delete")
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 94 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 95 |
|
| 96 | vni_config_xml=get_vni_config_xml(vni_id=vnid,
|
| 97 | mcast_ipv4=mcast_ipv4,
|
| 98 | next_hop_id=next_hop_id_mcast, operation="delete")
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 99 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 100 |
|
| 101 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 102 | dst_mac=dst_mac,
|
| 103 | phy_port=network_port_phy_port,
|
| 104 | vlan=network_port_vlan, operation="delete")
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 105 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 106 |
|
| 107 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 108 | dst_mac=dst_mac_mcast,
|
| 109 | phy_port=network_port_phy_port,
|
| 110 | vlan=network_port_vlan, operation="delete")
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 111 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 112 |
|
| macauley | 6f6ceb2 | 2015-08-07 09:37:12 +0800 | [diff] [blame] | 113 | xml_after=get_edit_config(config["switch_ip"])
|
| macauley_cheng | 681958a | 2015-11-11 10:32:05 +0800 | [diff] [blame] | 114 | #logging.info("xml_before\n %s", xml_before)
|
| 115 | #logging.info("xml_after\n %s", xml_after)
|
| 116 | #netopeer may have problem on xml process
|
| 117 | #assert(xml_before == xml_after)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 118 |
|
| 119 | class OverlayFloodGroup(base_tests.SimpleDataPlane):
|
| 120 | """
|
| 121 | create two lport
|
| 122 | """
|
| 123 | def runTest(self):
|
| 124 | """
|
| 125 | first verify flood over unicast,
|
| 126 | second verify flood over mcast
|
| 127 | """
|
| 128 | if config["switch_ip"] == None:
|
| 129 | logging.error("Doesn't configure switch IP")
|
| 130 | return
|
| 131 |
|
| 132 | delete_all_flows(self.controller)
|
| 133 | delete_all_groups(self.controller)
|
| 134 | #paramaters
|
| 135 | access_port_vid=1
|
| 136 | access_phy_port=1
|
| 137 | access_lport=0x10001
|
| 138 | vnid=103
|
| 139 | next_hop_id=1
|
| 140 | next_hop_id_mcast=2
|
| 141 | dst_mac="00:00:11:22:22:11"
|
| 142 | mcast_ipv4="224.1.1.1"
|
| 143 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 144 | network_port_phy_port=2
|
| 145 | network_lport=0x10002
|
| 146 | network_port_vlan=2
|
| 147 | network_port_sip="192.168.1.1"
|
| 148 | network_port_dip="192.168.2.1"
|
| 149 |
|
| 150 | feature_reply=get_featureReplay(self)
|
| 151 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 152 | dst_mac=dst_mac_mcast,
|
| 153 | phy_port=network_port_phy_port,
|
| 154 | vlan=network_port_vlan)
|
| 155 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 156 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 157 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast)
|
| 158 | logging.info("config VNI %lx", vnid);
|
| 159 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 160 |
|
| 161 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 162 | lport=access_lport, phy_port=access_phy_port,
|
| 163 | vlan=access_port_vid, vnid=vnid)
|
| 164 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport, access_phy_port, access_port_vid, vnid);
|
| 165 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 166 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 167 | dst_mac=dst_mac,
|
| 168 | phy_port=network_port_phy_port,
|
| 169 | vlan=network_port_vlan)
|
| 170 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 171 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 172 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 173 | lport=network_lport,
|
| 174 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 175 | next_hop_id=next_hop_id,
|
| 176 | vnid=vnid)
|
| 177 | logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id);
|
| 178 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 179 |
|
| 180 | #add flow over unicast group
|
| 181 | msg=add_l2_overlay_flood_over_unicast_tunnel_group(self.controller, vnid, [access_lport, network_lport], 1)
|
| 182 | #verify
|
| 183 | stats = get_stats(self, ofp.message.group_desc_stats_request())
|
| 184 | verify_group_stats=(ofp.group_desc_stats_entry(
|
| 185 | group_type=msg.group_type,
|
| 186 | group_id=msg.group_id,
|
| 187 | buckets=msg.buckets))
|
| 188 |
|
| 189 | self.assertEquals(stats, [verify_group_stats])
|
| 190 | #clear all group
|
| 191 | delete_all_groups(self.controller)
|
| 192 | #
|
| 193 | #flood over mcast
|
| 194 | msg=add_l2_overlay_flood_over_mcast_tunnel_group(self.controller, vnid, [access_lport, network_lport], 1)
|
| 195 |
|
| 196 | stats = get_stats(self, ofp.message.group_desc_stats_request())
|
| 197 |
|
| 198 | verify_group_stats=(ofp.group_desc_stats_entry(
|
| 199 | group_type=msg.group_type,
|
| 200 | group_id=msg.group_id,
|
| 201 | buckets=msg.buckets))
|
| 202 |
|
| 203 | self.assertEquals(stats, [verify_group_stats])
|
| 204 | #clear all group
|
| 205 | delete_all_groups(self.controller)
|
| 206 | #exit verification so clear all configuration
|
| 207 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 208 | lport=access_lport, phy_port=access_phy_port,
|
| 209 | vlan=access_port_vid, vnid=vnid, operation="delete")
|
| 210 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 211 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 212 | lport=network_lport,
|
| 213 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 214 | next_hop_id=next_hop_id,
|
| 215 | vnid=vnid, operation="delete")
|
| 216 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 217 |
|
| 218 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete")
|
| 219 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 220 |
|
| 221 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 222 | dst_mac=dst_mac,
|
| 223 | phy_port=network_port_phy_port,
|
| 224 | vlan=network_port_vlan, operation="delete")
|
| 225 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 226 |
|
| 227 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 228 | dst_mac=dst_mac_mcast,
|
| 229 | phy_port=network_port_phy_port,
|
| 230 | vlan=network_port_vlan, operation="delete")
|
| 231 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 232 |
|
| 233 | class OverlayMcastGroup(base_tests.SimpleDataPlane):
|
| 234 | """
|
| 235 | create two lport
|
| 236 | """
|
| 237 | def runTest(self):
|
| 238 | if config["switch_ip"] == None:
|
| 239 | logging.error("Doesn't configure switch IP")
|
| 240 | return
|
| 241 |
|
| 242 | delete_all_flows(self.controller)
|
| 243 | delete_all_groups(self.controller)
|
| 244 | #paramaters
|
| 245 | access_port_vid=1
|
| 246 | access_phy_port=1
|
| 247 | access_lport=0x10001
|
| 248 | vnid=103
|
| 249 | next_hop_id=1
|
| 250 | next_hop_id_mcast=2
|
| 251 | dst_mac="00:00:11:22:22:11"
|
| 252 | mcast_ipv4="224.1.1.1"
|
| 253 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 254 | network_port_phy_port=2
|
| 255 | network_lport=0x10002
|
| 256 | network_port_vlan=2
|
| 257 | network_port_sip="192.168.1.1"
|
| 258 | network_port_dip="192.168.2.1"
|
| 259 |
|
| 260 | feature_reply=get_featureReplay(self)
|
| 261 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 262 | dst_mac=dst_mac_mcast,
|
| 263 | phy_port=network_port_phy_port,
|
| 264 | vlan=network_port_vlan)
|
| 265 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 266 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 267 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast)
|
| 268 | logging.info("config VNI %lx", vnid);
|
| 269 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 270 |
|
| 271 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 272 | lport=access_lport, phy_port=access_phy_port,
|
| 273 | vlan=access_port_vid, vnid=vnid)
|
| 274 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport, access_phy_port, access_port_vid, vnid);
|
| 275 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 276 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 277 | dst_mac=dst_mac,
|
| 278 | phy_port=network_port_phy_port,
|
| 279 | vlan=network_port_vlan)
|
| 280 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 281 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 282 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 283 | lport=network_lport,
|
| 284 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 285 | next_hop_id=next_hop_id,
|
| 286 | vnid=vnid)
|
| 287 | logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id);
|
| 288 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 289 |
|
| 290 | #add flow over unicast group
|
| 291 | msg=msg=add_l2_overlay_mcast_over_unicast_tunnel_group(self.controller, vnid, [access_lport, network_lport], 1)
|
| 292 | #verify
|
| 293 | stats = get_stats(self, ofp.message.group_desc_stats_request())
|
| 294 | verify_group_stats=(ofp.group_desc_stats_entry(
|
| 295 | group_type=msg.group_type,
|
| 296 | group_id=msg.group_id,
|
| 297 | buckets=msg.buckets))
|
| 298 |
|
| 299 | self.assertEquals(stats, [verify_group_stats])
|
| 300 | #clear all group
|
| 301 | delete_all_groups(self.controller)
|
| 302 | #
|
| 303 | #flood over mcast
|
| 304 | msg=add_l2_overlay_mcast_over_mcast_tunnel_group(self.controller, vnid, [access_lport, network_lport], 1)
|
| 305 |
|
| 306 | stats = get_stats(self, ofp.message.group_desc_stats_request())
|
| 307 |
|
| 308 | verify_group_stats=(ofp.group_desc_stats_entry(
|
| 309 | group_type=msg.group_type,
|
| 310 | group_id=msg.group_id,
|
| 311 | buckets=msg.buckets))
|
| 312 |
|
| 313 | self.assertEquals(stats, [verify_group_stats])
|
| 314 | #clear all group
|
| 315 | delete_all_groups(self.controller)
|
| 316 | #exit verification so clear all configuration
|
| 317 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 318 | lport=access_lport, phy_port=access_phy_port,
|
| 319 | vlan=access_port_vid, vnid=vnid, operation="delete")
|
| 320 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 321 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 322 | lport=network_lport,
|
| 323 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 324 | next_hop_id=next_hop_id,
|
| 325 | vnid=vnid, operation="delete")
|
| 326 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 327 |
|
| 328 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete")
|
| 329 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 330 |
|
| 331 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 332 | dst_mac=dst_mac,
|
| 333 | phy_port=network_port_phy_port,
|
| 334 | vlan=network_port_vlan, operation="delete")
|
| 335 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 336 |
|
| 337 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 338 | dst_mac=dst_mac_mcast,
|
| 339 | phy_port=network_port_phy_port,
|
| 340 | vlan=network_port_vlan, operation="delete")
|
| 341 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 342 |
|
| 343 | class AccessToNetworkDLFMcast(base_tests.SimpleDataPlane):
|
| 344 | def runTest(self):
|
| 345 | """
|
| 346 | first verify flood over unicast,
|
| 347 | second verify flood over mcast
|
| 348 | """
|
| 349 | if config["switch_ip"] == None:
|
| 350 | logging.error("Doesn't configure switch IP")
|
| 351 | return
|
| 352 |
|
| 353 | delete_all_flows(self.controller)
|
| 354 | delete_all_groups(self.controller)
|
| 355 |
|
| 356 | access_port1_vid=1
|
| 357 | access_phy_port1=config["port_map"].keys()[0]
|
| 358 | access_lport1=0x10001
|
| 359 | access_port2_vid=0
|
| 360 | access_phy_port2=config["port_map"].keys()[1]
|
| 361 | access_lport2=0x10002
|
| 362 | vnid=10
|
| 363 | next_hop_id=1
|
| 364 | next_hop_id_mcast=2
|
| 365 | dst_mac="00:00:11:22:22:11"
|
| 366 | mcast_ipv4="224.1.1.1"
|
| 367 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 368 | network_port_phy_port=config["port_map"].keys()[2]
|
| 369 | network_lport=0x10003
|
| 370 | network_port_vlan=2
|
| 371 | network_port_sip="192.168.1.1"
|
| 372 | network_port_dip="192.168.2.1"
|
| 373 |
|
| 374 | feature_reply=get_featureReplay(self)
|
| 375 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 376 | dst_mac=dst_mac,
|
| 377 | phy_port=network_port_phy_port,
|
| 378 | vlan=network_port_vlan)
|
| 379 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 380 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 381 |
|
| 382 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 383 | dst_mac=dst_mac_mcast,
|
| 384 | phy_port=network_port_phy_port,
|
| 385 | vlan=network_port_vlan)
|
| 386 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 387 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 388 |
|
| 389 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast)
|
| 390 | logging.info("config VNI %lx", vnid);
|
| 391 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 392 |
|
| 393 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 394 | lport=access_lport1, phy_port=access_phy_port1,
|
| 395 | vlan=access_port1_vid, vnid=vnid)
|
| 396 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid);
|
| 397 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 398 |
|
| 399 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 400 | lport=access_lport2, phy_port=access_phy_port2,
|
| 401 | vlan=access_port2_vid, vnid=vnid)
|
| 402 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid);
|
| 403 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 404 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 405 | lport=network_lport,
|
| 406 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 407 | next_hop_id=next_hop_id,
|
| 408 | vnid=vnid)
|
| 409 | logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id);
|
| 410 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 411 |
|
| 412 | #get_edit_config(config["switch_ip"])
|
| 413 |
|
| 414 | #add port table to have vxlan ability
|
| 415 | add_port_table_flow(self.controller)
|
| 416 |
|
| 417 | #for network port need l2 interface group to decide vlan tag or not
|
| 418 | add_one_l2_interface_grouop(self.controller, network_port_phy_port, vlan_id=network_port_vlan)
|
| 419 |
|
| 420 | #add DLF bridge flow
|
| 421 | msg=add_l2_overlay_flood_over_mcast_tunnel_group(self.controller, vnid, [access_lport1, access_lport2, network_lport], 1)
|
| 422 | add_overlay_bridge_flow(self.controller, None, vnid, msg.group_id, True, True)
|
| 423 |
|
| 424 | #send packet on access port
|
| 425 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11',
|
| 426 | dl_vlan_enable= True,
|
| 427 | vlan_vid=access_port1_vid)
|
| 428 | pkt = str(parsed_pkt)
|
| 429 | self.dataplane.send(access_phy_port1, pkt)
|
| 430 |
|
| 431 | #verify packet on access port
|
| 432 | parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:00:11:11:11:11')
|
| 433 | pkt = str(parsed_pkt)
|
| 434 | verify_packet(self, pkt, access_phy_port2)
|
| 435 | #vxlan packet IP header have some parmater decide by HW,
|
| 436 | #we can easy to check VxLAN IP header
|
| 437 | verify_packet(self, pkt, network_port_phy_port)
|
| 438 | verify_no_other_packets(self)
|
| 439 |
|
| 440 | add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0x9a], vnid, network_lport, False, True)
|
| 441 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:9a',
|
| 442 | dl_vlan_enable= True,
|
| 443 | vlan_vid=access_port1_vid)
|
| 444 | pkt = str(parsed_pkt)
|
| 445 | self.dataplane.send(access_phy_port1, pkt)
|
| 446 | #verify packet on network port
|
| 447 | parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:12:34:56:78:9a')
|
| 448 | pkt = str(parsed_pkt)
|
| 449 | verify_packet(self, pkt, network_port_phy_port)
|
| 450 | verify_no_other_packets(self)
|
| 451 |
|
| 452 | #exit verification so clear all configuration
|
| 453 | delete_all_flows(self.controller)
|
| 454 | delete_all_groups(self.controller)
|
| 455 |
|
| 456 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 457 | lport=access_lport1, phy_port=access_phy_port1,
|
| 458 | vlan=access_port1_vid, vnid=vnid, operation="delete")
|
| 459 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 460 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 461 | lport=access_lport2, phy_port=access_phy_port2,
|
| 462 | vlan=access_port2_vid, vnid=vnid, operation="delete")
|
| 463 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 464 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 465 | lport=network_lport,
|
| 466 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 467 | next_hop_id=next_hop_id,
|
| 468 | vnid=vnid, operation="delete")
|
| 469 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 470 |
|
| 471 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete")
|
| 472 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 473 |
|
| 474 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 475 | dst_mac=dst_mac,
|
| 476 | phy_port=network_port_phy_port,
|
| 477 | vlan=network_port_vlan, operation="delete")
|
| 478 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 479 |
|
| 480 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 481 | dst_mac=dst_mac_mcast,
|
| 482 | phy_port=network_port_phy_port,
|
| 483 | vlan=network_port_vlan, operation="delete")
|
| 484 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 485 |
|
| 486 | class AccessToNetworkDLFUcast(base_tests.SimpleDataPlane):
|
| 487 | def runTest(self):
|
| 488 | """
|
| 489 | first verify flood over unicast,
|
| 490 | second verify flood over mcast
|
| 491 | """
|
| 492 | if config["switch_ip"] == None:
|
| 493 | logging.error("Doesn't configure switch IP")
|
| 494 | return
|
| 495 |
|
| 496 | delete_all_flows(self.controller)
|
| 497 | delete_all_groups(self.controller)
|
| 498 |
|
| 499 | access_port1_vid=1
|
| 500 | access_phy_port1=config["port_map"].keys()[0]
|
| 501 | access_lport1=0x10001
|
| 502 | access_port2_vid=0
|
| 503 | access_phy_port2=config["port_map"].keys()[1]
|
| 504 | access_lport2=0x10002
|
| 505 | vnid=10
|
| 506 | next_hop_id=1
|
| 507 | next_hop_id_mcast=2
|
| 508 | dst_mac="00:00:11:22:22:11"
|
| 509 | mcast_ipv4="224.1.1.1"
|
| 510 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 511 | network_port_phy_port=config["port_map"].keys()[2]
|
| 512 | network_lport=0x10003
|
| 513 | network_port_vlan=2
|
| 514 | network_port_sip="192.168.1.1"
|
| 515 | network_port_dip="192.168.2.1"
|
| 516 |
|
| 517 | feature_reply=get_featureReplay(self)
|
| 518 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 519 | dst_mac=dst_mac,
|
| 520 | phy_port=network_port_phy_port,
|
| 521 | vlan=network_port_vlan)
|
| 522 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 523 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 524 |
|
| 525 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 526 | dst_mac=dst_mac_mcast,
|
| 527 | phy_port=network_port_phy_port,
|
| 528 | vlan=network_port_vlan)
|
| 529 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 530 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 531 |
|
| 532 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast)
|
| 533 | logging.info("config VNI %lx", vnid);
|
| 534 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 535 |
|
| 536 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 537 | lport=access_lport1, phy_port=access_phy_port1,
|
| 538 | vlan=access_port1_vid, vnid=vnid)
|
| 539 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid);
|
| 540 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 541 |
|
| 542 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 543 | lport=access_lport2, phy_port=access_phy_port2,
|
| 544 | vlan=access_port2_vid, vnid=vnid)
|
| 545 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid);
|
| 546 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 547 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 548 | lport=network_lport,
|
| 549 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 550 | next_hop_id=next_hop_id,
|
| 551 | vnid=vnid)
|
| 552 | logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id);
|
| 553 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 554 |
|
| 555 | #get_edit_config(config["switch_ip"])
|
| 556 |
|
| 557 | #add port table to have vxlan ability
|
| 558 | add_port_table_flow(self.controller)
|
| 559 |
|
| 560 | #for network port need l2 interface group to decide vlan tag or not
|
| 561 | add_one_l2_interface_grouop(self.controller, network_port_phy_port, vlan_id=network_port_vlan)
|
| 562 |
|
| 563 | #add DLF bridge flow
|
| 564 | msg=add_l2_overlay_flood_over_unicast_tunnel_group(self.controller, vnid, [access_lport1, access_lport2, network_lport], 1)
|
| 565 | add_overlay_bridge_flow(self.controller, None, vnid, msg.group_id, True, True)
|
| 566 |
|
| 567 | #send packet on access port
|
| 568 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11',
|
| 569 | dl_vlan_enable= True,
|
| 570 | vlan_vid=access_port1_vid)
|
| 571 | pkt = str(parsed_pkt)
|
| 572 | self.dataplane.send(access_phy_port1, pkt)
|
| 573 |
|
| 574 | #verify packet on access port
|
| 575 | parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:00:11:11:11:11')
|
| 576 | pkt = str(parsed_pkt)
|
| 577 | verify_packet(self, pkt, access_phy_port2)
|
| 578 | #vxlan packet IP header have some parmater decide by HW,
|
| 579 | #we can easy to check VxLAN IP header
|
| 580 | verify_packet(self, pkt, network_port_phy_port)
|
| 581 | verify_no_other_packets(self)
|
| 582 |
|
| 583 | add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0x9a], vnid, network_lport, False, True)
|
| 584 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:9a',
|
| 585 | dl_vlan_enable= True,
|
| 586 | vlan_vid=access_port1_vid)
|
| 587 | pkt = str(parsed_pkt)
|
| 588 | self.dataplane.send(access_phy_port1, pkt)
|
| 589 | #verify packet on network port
|
| 590 | parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:12:34:56:78:9a')
|
| 591 | pkt = str(parsed_pkt)
|
| 592 | verify_packet(self, pkt, network_port_phy_port)
|
| 593 | verify_no_other_packets(self)
|
| 594 |
|
| 595 | #exit verification so clear all configuration
|
| 596 | delete_all_flows(self.controller)
|
| 597 | delete_all_groups(self.controller)
|
| 598 |
|
| 599 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 600 | lport=access_lport1, phy_port=access_phy_port1,
|
| 601 | vlan=access_port1_vid, vnid=vnid, operation="delete")
|
| 602 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 603 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 604 | lport=access_lport2, phy_port=access_phy_port2,
|
| 605 | vlan=access_port2_vid, vnid=vnid, operation="delete")
|
| 606 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 607 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 608 | lport=network_lport,
|
| 609 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 610 | next_hop_id=next_hop_id,
|
| 611 | vnid=vnid, operation="delete")
|
| 612 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 613 |
|
| 614 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete")
|
| 615 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 616 |
|
| 617 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 618 | dst_mac=dst_mac,
|
| 619 | phy_port=network_port_phy_port,
|
| 620 | vlan=network_port_vlan, operation="delete")
|
| 621 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 622 |
|
| 623 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 624 | dst_mac=dst_mac_mcast,
|
| 625 | phy_port=network_port_phy_port,
|
| 626 | vlan=network_port_vlan, operation="delete")
|
| 627 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 628 |
|
| macauley_cheng | 0a0a7f6 | 2015-11-06 11:36:50 +0800 | [diff] [blame] | 629 | class AccessWithAccessDiffPortVlan(base_tests.SimpleDataPlane):
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 630 | def runTest(self):
|
| 631 | """
|
| 632 | first verify flood over unicast,
|
| 633 | second verify flood over mcast
|
| 634 | """
|
| 635 | if config["switch_ip"] == None:
|
| 636 | logging.error("Doesn't configure switch IP")
|
| 637 | return
|
| 638 |
|
| 639 | delete_all_flows(self.controller)
|
| 640 | delete_all_groups(self.controller)
|
| 641 |
|
| 642 | access_port1_vid=1
|
| 643 | access_phy_port1=config["port_map"].keys()[0]
|
| 644 | access_lport1=0x10001
|
| 645 | access_port2_vid=0
|
| 646 | access_phy_port2=config["port_map"].keys()[1]
|
| 647 | access_lport2=0x10002
|
| 648 | access_port3_vid=3
|
| 649 | access_phy_port3=config["port_map"].keys()[2]
|
| 650 | access_lport3=0x10003
|
| 651 | vnid=10
|
| 652 | next_hop_id_mcast=1
|
| 653 | mcast_ipv4="224.1.1.1"
|
| 654 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 655 |
|
| 656 | feature_reply=get_featureReplay(self)
|
| 657 |
|
| 658 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 659 | dst_mac=dst_mac_mcast,
|
| 660 | phy_port=access_phy_port3,
|
| 661 | vlan=access_port3_vid)
|
| 662 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id_mcast, dst_mac_mcast, access_phy_port3, access_port3_vid);
|
| 663 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 664 |
|
| 665 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast)
|
| 666 | logging.info("config VNI %lx", vnid);
|
| 667 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 668 |
|
| 669 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 670 | lport=access_lport1, phy_port=access_phy_port1,
|
| 671 | vlan=access_port1_vid, vnid=vnid)
|
| 672 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid);
|
| 673 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 674 |
|
| 675 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 676 | lport=access_lport2, phy_port=access_phy_port2,
|
| 677 | vlan=access_port2_vid, vnid=vnid)
|
| 678 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid);
|
| 679 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 680 |
|
| 681 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 682 | lport=access_lport3, phy_port=access_phy_port3,
|
| 683 | vlan=access_port3_vid, vnid=vnid)
|
| 684 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport3, access_phy_port3, access_port3_vid, vnid);
|
| 685 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 686 |
|
| 687 |
|
| 688 | #add port table to have vxlan ability
|
| 689 | add_port_table_flow(self.controller)
|
| 690 |
|
| 691 | #add DLF bridge flow
|
| 692 | msg=add_l2_overlay_flood_over_mcast_tunnel_group(self.controller, vnid, [access_lport1, access_lport2, access_lport3], 1)
|
| 693 | add_overlay_bridge_flow(self.controller, None, vnid, msg.group_id, True, True)
|
| 694 |
|
| 695 | #send packet on access port
|
| 696 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11',
|
| 697 | dl_vlan_enable= True,
|
| 698 | vlan_vid=access_port1_vid)
|
| 699 | pkt = str(parsed_pkt)
|
| 700 | self.dataplane.send(access_phy_port1, pkt)
|
| 701 |
|
| 702 | #verify packet on access port 2, vid=0, so untag
|
| 703 | parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:00:11:11:11:11')
|
| 704 | pkt = str(parsed_pkt)
|
| 705 | verify_packet(self, pkt, access_phy_port2)
|
| 706 | #verify packet on access port 3
|
| 707 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11',
|
| 708 | dl_vlan_enable= True,
|
| 709 | vlan_vid=access_port3_vid)
|
| 710 | pkt = str(parsed_pkt)
|
| 711 | verify_packet(self, pkt, access_phy_port3)
|
| 712 | verify_no_other_packets(self)
|
| 713 |
|
| 714 | add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0x9a], vnid, access_lport2, False, True)
|
| 715 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:9a',
|
| 716 | dl_vlan_enable= True,
|
| 717 | vlan_vid=access_port1_vid)
|
| 718 | pkt = str(parsed_pkt)
|
| 719 | self.dataplane.send(access_phy_port1, pkt)
|
| 720 | #verify packet on access port
|
| 721 | parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:12:34:56:78:9a')
|
| 722 | pkt = str(parsed_pkt)
|
| 723 | verify_packet(self, pkt, access_phy_port2)
|
| 724 | verify_no_other_packets(self)
|
| 725 |
|
| 726 |
|
| 727 | add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0xaa], vnid, access_lport3, False, True)
|
| 728 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:aa',
|
| 729 | dl_vlan_enable= True,
|
| 730 | vlan_vid=access_port1_vid)
|
| 731 | pkt = str(parsed_pkt)
|
| 732 | self.dataplane.send(access_phy_port1, pkt)
|
| 733 | #verify packet on access port
|
| 734 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:aa',
|
| 735 | dl_vlan_enable= True,
|
| 736 | vlan_vid=access_port3_vid)
|
| 737 | pkt = str(parsed_pkt)
|
| 738 | verify_packet(self, pkt, access_phy_port3)
|
| 739 | verify_no_other_packets(self)
|
| 740 |
|
| 741 |
|
| 742 |
|
| 743 | #exit verification so clear all configuration
|
| 744 | delete_all_flows(self.controller)
|
| 745 | delete_all_groups(self.controller)
|
| 746 |
|
| 747 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 748 | lport=access_lport1, phy_port=access_phy_port1,
|
| 749 | vlan=access_port1_vid, vnid=vnid, operation="delete")
|
| 750 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 751 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 752 | lport=access_lport2, phy_port=access_phy_port2,
|
| 753 | vlan=access_port2_vid, vnid=vnid, operation="delete")
|
| 754 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 755 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 756 | lport=access_lport3, phy_port=access_phy_port3,
|
| 757 | vlan=access_port3_vid, vnid=vnid, operation="delete")
|
| 758 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport3, access_phy_port3, access_port3_vid, vnid);
|
| 759 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 760 |
|
| 761 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete")
|
| 762 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 763 |
|
| 764 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 765 | dst_mac=dst_mac_mcast,
|
| 766 | phy_port=access_phy_port3,
|
| 767 | vlan=access_port3_vid, operation="delete")
|
| 768 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 769 |
|
| macauley_cheng | 0a0a7f6 | 2015-11-06 11:36:50 +0800 | [diff] [blame] | 770 |
|
| 771 | class AccessWithAccessSamePortDiffVlan(base_tests.SimpleDataPlane):
|
| 772 | def runTest(self):
|
| 773 | """
|
| 774 | first verify flood over unicast,
|
| 775 | second verify flood over mcast
|
| 776 | """
|
| 777 | if config["switch_ip"] == None:
|
| 778 | logging.error("Doesn't configure switch IP")
|
| 779 | return
|
| 780 |
|
| 781 | delete_all_flows(self.controller)
|
| 782 | delete_all_groups(self.controller)
|
| 783 |
|
| 784 | access_port1_vid=1
|
| 785 | access_phy_port1=config["port_map"].keys()[0]
|
| 786 | access_lport1=0x10001
|
| macauley_cheng | 681958a | 2015-11-11 10:32:05 +0800 | [diff] [blame] | 787 | access_port2_vid=2
|
| macauley_cheng | 0a0a7f6 | 2015-11-06 11:36:50 +0800 | [diff] [blame] | 788 | access_phy_port2= access_phy_port1
|
| 789 | access_lport2=0x10002
|
| 790 | access_port3_vid=3
|
| 791 | access_phy_port3=access_phy_port1
|
| 792 | access_lport3=0x10003
|
| 793 | vnid=10
|
| 794 | next_hop_id_mcast=1
|
| 795 | mcast_ipv4="224.1.1.1"
|
| 796 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 797 |
|
| 798 | feature_reply=get_featureReplay(self)
|
| 799 |
|
| 800 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 801 | dst_mac=dst_mac_mcast,
|
| 802 | phy_port=access_phy_port3,
|
| 803 | vlan=access_port3_vid)
|
| 804 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id_mcast, dst_mac_mcast, access_phy_port3, access_port3_vid);
|
| 805 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 806 |
|
| 807 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast)
|
| 808 | logging.info("config VNI %lx", vnid);
|
| 809 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 810 |
|
| 811 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 812 | lport=access_lport1, phy_port=access_phy_port1,
|
| 813 | vlan=access_port1_vid, vnid=vnid)
|
| 814 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid);
|
| 815 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 816 |
|
| 817 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 818 | lport=access_lport2, phy_port=access_phy_port2,
|
| 819 | vlan=access_port2_vid, vnid=vnid)
|
| 820 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid);
|
| 821 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 822 |
|
| 823 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 824 | lport=access_lport3, phy_port=access_phy_port3,
|
| 825 | vlan=access_port3_vid, vnid=vnid)
|
| 826 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport3, access_phy_port3, access_port3_vid, vnid);
|
| 827 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 828 |
|
| 829 |
|
| 830 | #add port table to have vxlan ability
|
| 831 | add_port_table_flow(self.controller)
|
| 832 |
|
| 833 | #add DLF bridge flow
|
| 834 | msg=add_l2_overlay_flood_over_mcast_tunnel_group(self.controller, vnid, [access_lport1, access_lport2, access_lport3], 1)
|
| 835 | add_overlay_bridge_flow(self.controller, None, vnid, msg.group_id, True, True)
|
| 836 |
|
| 837 | #send packet on access port
|
| 838 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11',
|
| 839 | dl_vlan_enable= True,
|
| 840 | vlan_vid=access_port1_vid)
|
| 841 | pkt = str(parsed_pkt)
|
| 842 | self.dataplane.send(access_phy_port1, pkt)
|
| 843 |
|
| 844 | #verify packet on access port 2, vid=0, so untag
|
| macauley_cheng | 681958a | 2015-11-11 10:32:05 +0800 | [diff] [blame] | 845 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11',
|
| 846 | dl_vlan_enable = True,
|
| 847 | vlan_vid = access_port2_vid)
|
| macauley_cheng | 0a0a7f6 | 2015-11-06 11:36:50 +0800 | [diff] [blame] | 848 | pkt = str(parsed_pkt)
|
| 849 | verify_packet(self, pkt, access_phy_port2)
|
| 850 | #verify packet on access port 3
|
| 851 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11',
|
| 852 | dl_vlan_enable= True,
|
| 853 | vlan_vid=access_port3_vid)
|
| 854 | pkt = str(parsed_pkt)
|
| 855 | verify_packet(self, pkt, access_phy_port3)
|
| 856 | verify_no_other_packets(self)
|
| 857 |
|
| 858 | add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0x9a], vnid, access_lport2, False, True)
|
| 859 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:9a',
|
| 860 | dl_vlan_enable= True,
|
| 861 | vlan_vid=access_port1_vid)
|
| 862 | pkt = str(parsed_pkt)
|
| 863 | self.dataplane.send(access_phy_port1, pkt)
|
| 864 | #verify packet on access port
|
| macauley_cheng | 681958a | 2015-11-11 10:32:05 +0800 | [diff] [blame] | 865 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:9a',
|
| 866 | dl_vlan_enable = True,
|
| 867 | vlan_vid = access_port2_vid)
|
| macauley_cheng | 0a0a7f6 | 2015-11-06 11:36:50 +0800 | [diff] [blame] | 868 | pkt = str(parsed_pkt)
|
| 869 | verify_packet(self, pkt, access_phy_port2)
|
| 870 | verify_no_other_packets(self)
|
| 871 |
|
| 872 |
|
| 873 | add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0xaa], vnid, access_lport3, False, True)
|
| 874 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:aa',
|
| 875 | dl_vlan_enable= True,
|
| 876 | vlan_vid=access_port1_vid)
|
| 877 | pkt = str(parsed_pkt)
|
| 878 | self.dataplane.send(access_phy_port1, pkt)
|
| 879 | #verify packet on access port
|
| 880 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:aa',
|
| 881 | dl_vlan_enable= True,
|
| 882 | vlan_vid=access_port3_vid)
|
| 883 | pkt = str(parsed_pkt)
|
| 884 | verify_packet(self, pkt, access_phy_port3)
|
| 885 | verify_no_other_packets(self)
|
| 886 |
|
| 887 | add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0xbb], vnid, access_lport2, False, True)
|
| macauley_cheng | 681958a | 2015-11-11 10:32:05 +0800 | [diff] [blame] | 888 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:bb',
|
| macauley_cheng | 0a0a7f6 | 2015-11-06 11:36:50 +0800 | [diff] [blame] | 889 | dl_vlan_enable= True,
|
| 890 | vlan_vid=access_port1_vid)
|
| 891 | pkt = str(parsed_pkt)
|
| 892 | self.dataplane.send(access_phy_port1, pkt)
|
| 893 | #verify packet on access port
|
| 894 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:bb',
|
| 895 | dl_vlan_enable= True,
|
| 896 | vlan_vid=access_port2_vid)
|
| 897 | pkt = str(parsed_pkt)
|
| 898 | verify_packet(self, pkt, access_phy_port2)
|
| 899 | verify_no_other_packets(self)
|
| 900 |
|
| 901 | #exit verification so clear all configuration
|
| 902 | delete_all_flows(self.controller)
|
| 903 | delete_all_groups(self.controller)
|
| 904 |
|
| 905 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 906 | lport=access_lport1, phy_port=access_phy_port1,
|
| 907 | vlan=access_port1_vid, vnid=vnid, operation="delete")
|
| 908 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 909 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 910 | lport=access_lport2, phy_port=access_phy_port2,
|
| 911 | vlan=access_port2_vid, vnid=vnid, operation="delete")
|
| 912 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 913 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 914 | lport=access_lport3, phy_port=access_phy_port3,
|
| 915 | vlan=access_port3_vid, vnid=vnid, operation="delete")
|
| 916 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport3, access_phy_port3, access_port3_vid, vnid);
|
| 917 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 918 |
|
| 919 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete")
|
| 920 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 921 |
|
| 922 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 923 | dst_mac=dst_mac_mcast,
|
| 924 | phy_port=access_phy_port3,
|
| 925 | vlan=access_port3_vid, operation="delete")
|
| 926 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 927 |
|
| 928 |
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 929 | class AccessWithNetwork(base_tests.SimpleDataPlane):
|
| 930 | def runTest(self):
|
| macauley | ee5bfa7 | 2015-08-03 10:11:14 +0800 | [diff] [blame] | 931 | """
|
| 932 | first verify flood over unicast,
|
| 933 | second verify flood over mcast
|
| 934 | """
|
| 935 | if config["switch_ip"] == None:
|
| 936 | logging.error("Doesn't configure switch IP")
|
| 937 | return
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 938 | delete_all_flows(self.controller)
|
| 939 | delete_all_groups(self.controller)
|
| macauley | ee5bfa7 | 2015-08-03 10:11:14 +0800 | [diff] [blame] | 940 |
|
| 941 | access_port1_vid=1
|
| 942 | access_phy_port1=config["port_map"].keys()[0]
|
| 943 | access_lport1=0x10001
|
| 944 | access_lport1_mac=[0x00, 0x00, 0x00, 0x77, 0x77, 0x77]
|
| 945 | access_lport1_mac_str=(":".join(map(str, map(hex, access_lport1_mac)))).replace("0x", "")
|
| 946 | access_port2_vid=0
|
| 947 | access_phy_port2=config["port_map"].keys()[1]
|
| 948 | access_lport2=0x10002
|
| 949 | access_lport2_mac=[0x00,0x00, 0x00, 0x00, 0x00, 0x02]
|
| 950 | access_lport2_mac_str=(":".join(map(str, map(hex, access_lport2_mac)))).replace("0x", "")
|
| 951 | vnid=10
|
| 952 | next_hop_id=1
|
| 953 | next_hop_id_mcast=2
|
| 954 | dst_mac="00:00:11:22:22:11"
|
| 955 | mcast_ipv4="224.1.1.1"
|
| 956 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 957 | network_port_phy_port=config["port_map"].keys()[2]
|
| 958 | network_lport=0x10003
|
| 959 | network_port_vlan=2
|
| 960 | network_port_sip="192.168.1.1"
|
| 961 | network_port_dip="192.168.2.1"
|
| 962 | network_lport_mac=[0x00,0x00, 0x00, 0x00, 0x00, 0x03]
|
| 963 | network_lport_mac_str=(":".join(map(str, map(hex, network_lport_mac)))).replace("0x", "")
|
| 964 |
|
| 965 |
|
| 966 |
|
| 967 | feature_reply=get_featureReplay(self)
|
| 968 | #get switch CPU mac
|
| 969 | str_datapath_id_f= "{:016x}".format(feature_reply.datapath_id)
|
| 970 | str_datapath_id=':'.join([str_datapath_id_f[i:i+2] for i in range(0, len(str_datapath_id_f), 2)])
|
| 971 | switch_cpu_mac_str=str_datapath_id[6:]
|
| 972 | switch_cpu_mac = switch_cpu_mac_str.split(":")
|
| 973 | switch_cpu_mac=[int(switch_cpu_mac[i],16) for i in range(0, len(switch_cpu_mac))]
|
| 974 |
|
| 975 | #add config vtep/vtap/nexthop/vni
|
| 976 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 977 | dst_mac=dst_mac,
|
| 978 | phy_port=network_port_phy_port,
|
| 979 | vlan=network_port_vlan)
|
| 980 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 981 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 982 |
|
| 983 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 984 | dst_mac=dst_mac_mcast,
|
| 985 | phy_port=network_port_phy_port,
|
| 986 | vlan=network_port_vlan)
|
| 987 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan);
|
| 988 |
|
| 989 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 990 |
|
| 991 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast)
|
| 992 | #vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None)
|
| 993 | logging.info("config VNI %lx", vnid);
|
| 994 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 995 |
|
| 996 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 997 | lport=access_lport1, phy_port=access_phy_port1,
|
| 998 | vlan=access_port1_vid, vnid=vnid)
|
| 999 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid);
|
| 1000 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 1001 |
|
| 1002 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1003 | lport=access_lport2, phy_port=access_phy_port2,
|
| 1004 | vlan=access_port2_vid, vnid=vnid)
|
| 1005 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid);
|
| 1006 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 1007 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1008 | lport=network_lport,
|
| 1009 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 1010 | next_hop_id=next_hop_id,
|
| 1011 | vnid=vnid)
|
| 1012 | logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id);
|
| 1013 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 1014 |
|
| 1015 | #add port table to have vxlan ability
|
| 1016 | add_port_table_flow(self.controller)
|
| 1017 | add_port_table_flow(self.controller, is_overlay=False)
|
| 1018 |
|
| 1019 | #for network port need l2 interface group to decide vlan tag or not
|
| 1020 | add_one_l2_interface_grouop(self.controller, network_port_phy_port, vlan_id=network_port_vlan)
|
| 1021 | #add network mac
|
| 1022 | add_overlay_bridge_flow(self.controller, network_lport_mac, vnid, network_lport, False, True)
|
| 1023 | add_overlay_bridge_flow(self.controller, access_lport1_mac, vnid, access_lport1, False, True)
|
| 1024 |
|
| 1025 | #add termination table for network port
|
| 1026 | add_termination_flow(self.controller, in_port=network_port_phy_port, eth_type=0x0800,
|
| 1027 | dst_mac=switch_cpu_mac, vlanid=network_port_vlan)
|
| 1028 | #add vlan table for network port rx packet class vlan
|
| 1029 | add_one_vlan_table_flow(self.controller, of_port=network_port_phy_port,
|
| 1030 | vlan_id=network_port_vlan)
|
| 1031 |
|
| 1032 | #tx packet on access lport 1
|
| 1033 | parsed_pkt = simple_udp_packet(pktlen=96, eth_dst=network_lport_mac_str,
|
| 1034 | dl_vlan_enable= True,
|
| 1035 | vlan_vid=access_port1_vid)
|
| 1036 | pkt = str(parsed_pkt)
|
| 1037 | self.dataplane.send(access_phy_port1, pkt)
|
| 1038 | #verify packet on network port
|
| 1039 | #need find a way to verify vxlan header
|
| 1040 | parsed_pkt = simple_udp_packet(pktlen=92, eth_dst=network_lport_mac_str)
|
| 1041 | pkt = str(parsed_pkt)
|
| 1042 | verify_packet(self, pkt, network_port_phy_port)
|
| 1043 | verify_no_other_packets(self)
|
| 1044 |
|
| 1045 | #tx packet on network lport
|
| 1046 | inner_pkt = simple_udp_packet(pktlen=96, eth_dst=access_lport1_mac_str)
|
| 1047 | vxlan_pkt = simple_vxlan_packet(eth_dst=switch_cpu_mac_str,
|
| 1048 | vnid=vnid,
|
| 1049 | ip_dst= network_port_sip,
|
| 1050 | ip_src=network_port_dip,
|
| 1051 | inner_payload=inner_pkt)
|
| 1052 | self.dataplane.send(network_port_phy_port, str(vxlan_pkt))
|
| 1053 | #verify
|
| 1054 | inner_pkt = simple_udp_packet(pktlen=100, eth_dst=access_lport1_mac_str,
|
| 1055 | dl_vlan_enable= True,
|
| 1056 | vlan_vid=access_port1_vid)
|
| 1057 |
|
| 1058 | verify_packet(self, inner_pkt, access_phy_port1)
|
| 1059 | verify_no_other_packets(self)
|
| 1060 |
|
| 1061 |
|
| 1062 | #exit verification so clear all configuration
|
| 1063 | delete_all_flows(self.controller)
|
| 1064 | delete_all_groups(self.controller)
|
| 1065 |
|
| 1066 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1067 | lport=access_lport1, phy_port=access_phy_port1,
|
| 1068 | vlan=access_port1_vid, vnid=vnid, operation="delete")
|
| 1069 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 1070 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1071 | lport=access_lport2, phy_port=access_phy_port2,
|
| 1072 | vlan=access_port2_vid, vnid=vnid, operation="delete")
|
| 1073 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 1074 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1075 | lport=network_lport,
|
| 1076 | src_ip=network_port_sip, dst_ip=network_port_dip,
|
| 1077 | next_hop_id=next_hop_id,
|
| 1078 | vnid=vnid, operation="delete")
|
| 1079 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 1080 |
|
| 1081 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete")
|
| 1082 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 1083 |
|
| 1084 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id,
|
| 1085 | dst_mac=dst_mac,
|
| 1086 | phy_port=network_port_phy_port,
|
| 1087 | vlan=network_port_vlan, operation="delete")
|
| 1088 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 1089 |
|
| 1090 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 1091 | dst_mac=dst_mac_mcast,
|
| 1092 | phy_port=network_port_phy_port,
|
| 1093 | vlan=network_port_vlan, operation="delete")
|
| 1094 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 1095 |
|
| 1096 | class NetworkToNetwork(base_tests.SimpleDataPlane):
|
| 1097 | def runTest(self):
|
| macauley | ee5bfa7 | 2015-08-03 10:11:14 +0800 | [diff] [blame] | 1098 | """
|
| 1099 | This case can't work, can't identify it is chip limitation or not
|
| 1100 | """
|
| 1101 | return
|
| 1102 | if config["switch_ip"] == None:
|
| 1103 | logging.error("Doesn't configure switch IP")
|
| 1104 | return
|
| 1105 |
|
| macauley | 68ace67 | 2015-07-27 17:40:50 +0800 | [diff] [blame] | 1106 | delete_all_flows(self.controller)
|
| macauley | ee5bfa7 | 2015-08-03 10:11:14 +0800 | [diff] [blame] | 1107 | delete_all_groups(self.controller)
|
| 1108 |
|
| 1109 | vnid=10
|
| 1110 | mcast_ipv4="224.1.1.1"
|
| 1111 | dst_mac_mcast="01:00:5e:01:01:01"
|
| 1112 | next_hop_id_mcast=3
|
| 1113 |
|
| 1114 | access_port1_vid=1
|
| 1115 | access_phy_port1=config["port_map"].keys()[0]
|
| 1116 | access_lport1=0x10001
|
| 1117 |
|
| 1118 | network_port1_phy_port=config["port_map"].keys()[1]
|
| 1119 | network_lport1=0x10003
|
| 1120 | network_port1_vlan=2
|
| 1121 | network_port1_sip="192.168.1.1"
|
| 1122 | network_port1_dip="192.168.2.1"
|
| 1123 | network_port1_next_hop_id=1
|
| 1124 | network_port1_dst_mac="00:00:11:22:22:11"
|
| 1125 | network_lport1_mac=[0x00,0x00, 0x00, 0x00, 0x00, 0x33]
|
| 1126 | network_lport1_mac_str=(":".join(map(str, map(hex, network_lport1_mac)))).replace("0x", "")
|
| 1127 |
|
| 1128 | network_port2_phy_port=config["port_map"].keys()[2]
|
| 1129 | network_lport2=0x10004
|
| 1130 | network_port2_vlan=3
|
| 1131 | network_port2_sip="192.168.3.1"
|
| 1132 | network_port2_dip="192.168.4.1"
|
| 1133 | network_port2_next_hop_id=2
|
| 1134 | network_port2_dst_mac="00:00:11:22:22:22"
|
| 1135 | network_lport2_mac=[0x00,0x00, 0x00, 0x00, 0x00, 0x44]
|
| 1136 | network_lport2_mac_str=(":".join(map(str, map(hex, network_lport2_mac)))).replace("0x", "")
|
| 1137 |
|
| 1138 | feature_reply=get_featureReplay(self)
|
| 1139 | #get switch CPU mac
|
| 1140 | str_datapath_id_f= "{:016x}".format(feature_reply.datapath_id)
|
| 1141 | str_datapath_id=':'.join([str_datapath_id_f[i:i+2] for i in range(0, len(str_datapath_id_f), 2)])
|
| 1142 | switch_cpu_mac_str=str_datapath_id[6:]
|
| 1143 | switch_cpu_mac = switch_cpu_mac_str.split(":")
|
| 1144 | switch_cpu_mac=[int(switch_cpu_mac[i],16) for i in range(0, len(switch_cpu_mac))]
|
| 1145 | #config vlxan
|
| 1146 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=network_port1_next_hop_id,
|
| 1147 | dst_mac=network_port1_dst_mac,
|
| 1148 | phy_port=network_port1_phy_port,
|
| 1149 | vlan=network_port1_vlan)
|
| 1150 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", network_port1_next_hop_id, network_port1_dst_mac, network_port1_phy_port, network_port1_vlan);
|
| 1151 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 1152 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=network_port2_next_hop_id,
|
| 1153 | dst_mac=network_port2_dst_mac,
|
| 1154 | phy_port=network_port2_phy_port,
|
| 1155 | vlan=network_port2_vlan)
|
| 1156 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", network_port2_next_hop_id, network_port2_dst_mac, network_port2_phy_port, network_port2_vlan);
|
| 1157 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 1158 |
|
| 1159 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 1160 | dst_mac=dst_mac_mcast,
|
| 1161 | phy_port=network_port1_phy_port,
|
| 1162 | vlan=network_port1_vlan)
|
| 1163 | logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id_mcast, dst_mac_mcast, network_port1_phy_port, network_port1_vlan);
|
| 1164 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True)
|
| 1165 |
|
| 1166 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast)
|
| 1167 | logging.info("config VNI %lx", vnid);
|
| 1168 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 1169 |
|
| 1170 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1171 | lport=access_lport1, phy_port=access_phy_port1,
|
| 1172 | vlan=access_port1_vid, vnid=vnid)
|
| 1173 | logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid);
|
| 1174 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 1175 |
|
| 1176 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1177 | lport=network_lport1,
|
| 1178 | src_ip=network_port1_sip, dst_ip=network_port1_dip,
|
| 1179 | next_hop_id=network_port1_next_hop_id,
|
| 1180 | vnid=vnid)
|
| 1181 | logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport1, network_port1_sip, network_port1_dip, network_port1_next_hop_id);
|
| 1182 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 1183 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1184 | lport=network_lport2,
|
| 1185 | src_ip=network_port2_sip, dst_ip=network_port2_dip,
|
| 1186 | next_hop_id=network_port2_next_hop_id,
|
| 1187 | vnid=vnid)
|
| 1188 | logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport2, network_port2_sip, network_port2_dip, network_port2_next_hop_id);
|
| 1189 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 1190 |
|
| 1191 | #add port table to have vxlan ability
|
| 1192 | add_port_table_flow(self.controller)
|
| 1193 |
|
| 1194 | #for network port need l2 interface group to decide vlan tag or not
|
| 1195 | add_one_l2_interface_grouop(self.controller, network_port1_phy_port, vlan_id=network_port1_vlan)
|
| 1196 | add_one_l2_interface_grouop(self.controller, network_port2_phy_port, vlan_id=network_port2_vlan)
|
| 1197 | #add network mac
|
| 1198 | add_overlay_bridge_flow(self.controller, network_lport1_mac, vnid, network_lport1, False, True)
|
| 1199 | add_overlay_bridge_flow(self.controller, network_lport2_mac, vnid, network_lport2, False, True)
|
| 1200 |
|
| 1201 | #add termination table for network port
|
| 1202 | add_termination_flow(self.controller, in_port=network_port1_phy_port, eth_type=0x0800,
|
| 1203 | dst_mac=switch_cpu_mac, vlanid=network_port1_vlan)
|
| 1204 | add_termination_flow(self.controller, in_port=network_port2_phy_port, eth_type=0x0800,
|
| 1205 | dst_mac=switch_cpu_mac, vlanid=network_port2_vlan)
|
| 1206 | #add vlan table for network port rx packet class vlan
|
| 1207 | add_one_vlan_table_flow(self.controller, of_port=network_port1_phy_port,
|
| 1208 | vlan_id=network_port1_vlan)
|
| 1209 | add_one_vlan_table_flow(self.controller, of_port=network_port2_phy_port,
|
| 1210 | vlan_id=network_port2_vlan)
|
| 1211 |
|
| 1212 | #packet tx on network port 1 rx on network port 2
|
| 1213 | inner_pkt = simple_udp_packet(pktlen=96, eth_dst=network_lport2_mac_str)
|
| 1214 | vxlan_pkt = simple_vxlan_packet(eth_dst=switch_cpu_mac_str,
|
| 1215 | vnid=vnid,
|
| 1216 | ip_dst= network_port1_sip,
|
| 1217 | ip_src=network_port1_dip,
|
| 1218 | inner_payload=inner_pkt)
|
| 1219 | self.dataplane.send(network_port1_phy_port, str(vxlan_pkt))
|
| 1220 | #verify
|
| 1221 | verify_packet(self, str(inner_pkt), network_port2_phy_port)
|
| 1222 | verify_no_other_packets(self)
|
| 1223 |
|
| 1224 |
|
| 1225 |
|
| 1226 | #exit verification so clear all configuration
|
| 1227 | delete_all_flows(self.controller)
|
| 1228 | delete_all_groups(self.controller)
|
| 1229 |
|
| 1230 | vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1231 | lport=access_lport1, phy_port=access_phy_port1,
|
| 1232 | vlan=access_port1_vid, vnid=vnid, operation="delete")
|
| 1233 | assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True)
|
| 1234 |
|
| 1235 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1236 | lport=network_lport1,
|
| 1237 | src_ip=network_port1_sip, dst_ip=network_port1_dip,
|
| 1238 | next_hop_id=network_port1_next_hop_id,
|
| 1239 | vnid=vnid, operation="delete")
|
| 1240 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 1241 | vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id,
|
| 1242 | lport=network_lport2,
|
| 1243 | src_ip=network_port2_sip, dst_ip=network_port2_dip,
|
| 1244 | next_hop_id=network_port2_next_hop_id,
|
| 1245 | vnid=vnid, operation="delete")
|
| 1246 | assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True)
|
| 1247 | vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete")
|
| 1248 | assert(send_edit_config(config["switch_ip"], vni_config_xml) == True)
|
| 1249 |
|
| 1250 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=network_port1_next_hop_id,
|
| 1251 | dst_mac=network_port1_dst_mac,
|
| 1252 | phy_port=network_port1_phy_port,
|
| 1253 | vlan=network_port1_vlan, operation="delete")
|
| 1254 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 1255 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=network_port2_next_hop_id,
|
| 1256 | dst_mac=network_port2_dst_mac,
|
| 1257 | phy_port=network_port2_phy_port,
|
| 1258 | vlan=network_port2_vlan, operation="delete")
|
| 1259 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 1260 | next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast,
|
| 1261 | dst_mac=dst_mac_mcast,
|
| 1262 | phy_port=network_port1_phy_port,
|
| 1263 | vlan=network_port1_vlan, operation="delete")
|
| 1264 | assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True)
|
| 1265 | |