M-CORD Release service charts
Change-Id: Ib6ea6b38abf802db15cabf3ed06fcfceae42cc05
diff --git a/mcord-release/mcord-services/templates/spgwu.yaml b/mcord-release/mcord-services/templates/spgwu.yaml
new file mode 100644
index 0000000..1c0c038
--- /dev/null
+++ b/mcord-release/mcord-services/templates/spgwu.yaml
@@ -0,0 +1,169 @@
+---
+# Copyright 2018-present Open Networking Foundation
+# Copyright 2018 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ .Values.spgwu.name }}
+data:
+ launch.sh: |
+ #!/bin/bash -xe
+
+ RUN_DIR=${RUN_DIR:-"/opt/dp"}
+ mkdir -p $RUN_DIR/config
+ cd $RUN_DIR/config
+ cp /etc/dp/config/{cdr.cfg,dp_config.cfg,interface.cfg} .
+ sed -i "s/CP_ADDR/$CP_ADDR/g" interface.cfg
+ sed -i "s/DP_ADDR/$DP_ADDR/g" interface.cfg
+ . dp_config.cfg
+ ngic_dataplane $EAL_ARGS -- $APP_ARGS
+ dp_config.cfg: |
+ if [ ! -d "/dev/hugepages" ]; then
+ MEMORY="--no-huge -m $((MEM_LIMIT-1024))"
+ fi
+
+ CORES="-c $(taskset -p $$ | awk '{print $NF}')"
+ EAL_ARGS="${CORES} ${MEMORY} ${DEVICES}"
+
+ SPGW_CFG="--spgw_cfg 03"
+ S1U_IP=$(ip -4 addr show dev ${S1U_DEVNAME} | grep -oP '(?<=inet\s)\d+(\.\d+){3}')
+ SGI_IP=$(ip -4 addr show dev ${SGI_DEVNAME} | grep -oP '(?<=inet\s)\d+(\.\d+){3}')
+ S1U_MAC=$(ip addr show dev ${S1U_DEVNAME} | awk '$1=="link/ether"{print $2}')
+ SGI_MAC=$(ip addr show dev ${SGI_DEVNAME} | awk '$1=="link/ether"{print $2}')
+ S1U="--s1u_ip ${S1U_IP} --s1u_mac ${S1U_MAC} --ul_iface ${S1U_DEVNAME}"
+ SGI="--sgi_ip ${SGI_IP} --sgi_mac ${SGI_MAC} --dl_iface ${SGI_DEVNAME} --sgi_gw_ip ${RTR_SGI_IP} --sgi_mask ${SGI_MASK}"
+ MISC="--log 1"
+ APP_ARGS="${S1U} ${SGI} ${MISC} ${SPGW_CFG}"
+ cdr.cfg: |
+ CDR_PATH=./cdr
+ MASTER_CDR=./cdr/master.csv
+ interface.cfg: |
+ [0]
+ dp_comm_ip = DP_ADDR
+ dp_comm_port = 20
+ cp_comm_ip = CP_ADDR
+ cp_comm_port = 21
+---
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.spgwu.name }}
+spec:
+ selector:
+ app: {{ .Values.spgwu.name }}
+ clusterIP: None
+ ports:
+ - name: cpdp
+ port: 20
+ protocol: UDP
+---
+apiVersion: apps/v1
+kind: StatefulSet
+metadata:
+ name: {{ .Values.spgwu.name }}
+ labels:
+ app: {{ .Values.spgwu.name }}
+spec:
+ replicas: 1
+ selector:
+ matchLabels:
+ app: {{ .Values.spgwu.name }}
+ serviceName: {{ .Values.spgwu.name | quote }}
+ template:
+ metadata:
+ labels:
+ app: {{ .Values.spgwu.name }}
+ annotations:
+ k8s.v1.cni.cncf.io/networks: '[
+ { "name": "s1u-net", "interface": "s1u-net" },
+ { "name": "sgi-net", "interface": "sgi-net" }
+ ]'
+ spec:
+ # Required if working with Linux bound devices so that kernel does not
+ # reply to GTP-U packets
+ #initContainers:
+ #- name: init
+ # image: "ngick8stesting/c3po-init"
+ # command: [ "sh", "-xec"]
+ # securityContext:
+ # capabilities:
+ # add:
+ # - NET_ADMIN
+ # args:
+ # - iptables -I OUTPUT -p icmp --icmp-type destination-unreachable -j DROP;
+ containers:
+ - name: {{ .Values.spgwu.name }}
+ image: {{ .Values.spgwu.image }}
+ imagePullPolicy: {{ .Values.global.imagepullpolicy }}
+ stdin: true
+ tty: true
+ env:
+ - name: MEM_LIMIT
+ valueFrom:
+ resourceFieldRef:
+ containerName: {{ .Values.spgwu.name }}
+ resource: limits.memory
+ divisor: 1Mi
+ - name: S1U_DEVNAME
+ value: s1u-net
+ - name: SGI_DEVNAME
+ value: sgi-net
+ - name: DEVICES
+ value: "" # "--no-pci --vdev eth_af_packet0,iface=s1u-net --vdev eth_af_packet1,iface=sgi-net"
+ - name: CP_ADDR
+ value: spgwc-0.{{ .Values.spgwc.name }}.{{ .Values.global.namespace }}.{{ .Values.global.fqdn }}
+ - name: DP_ADDR
+ valueFrom:
+ fieldRef:
+ fieldPath: status.podIP
+ - name: RTR_SGI_IP
+ value: "13.1.1.254"
+ - name: SGI_MASK
+ value: "255.255.255.0"
+ command: ["bash", "-xc"]
+ args:
+ - ip a;
+ /opt/dp/scripts/launch.sh;
+ volumeMounts:
+ - name: dp-script
+ mountPath: /opt/dp/scripts/launch.sh
+ subPath: launch.sh
+ - name: dp-config
+ mountPath: /etc/dp/config
+ #- name: hugepage
+ # mountPath: /dev/hugepages
+ resources:
+ limits:
+ #hugepages-1Gi: 8Gi
+ cpu: {{ .Values.spgwu.cpu | quote }}
+ memory: {{ .Values.spgwu.memory }}
+ intel.com/sriov: 2
+ securityContext:
+ capabilities:
+ add:
+ - IPC_LOCK
+ volumes:
+ - name: dp-script
+ configMap:
+ name: {{ .Values.spgwu.name }}
+ defaultMode: 493
+ - name: dp-config
+ configMap:
+ name: {{ .Values.spgwu.name }}
+ defaultMode: 420
+ #- name: hugepage
+ # emptyDir:
+ # medium: HugePages