diff --git a/omec/omec-control-plane/templates/bin/_mme-init.sh.tpl b/omec/omec-control-plane/templates/bin/_mme-init.sh.tpl
new file mode 100644
index 0000000..0b2e163
--- /dev/null
+++ b/omec/omec-control-plane/templates/bin/_mme-init.sh.tpl
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# Copyright 2019-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -ex
+
+cp /opt/mme/config/config.json /opt/mme/config/shared/config.json
+cd /opt/mme/config/shared
+
+# Set local IP address for s1ap and s11 networks to the config
+jq --arg MME_LOCAL_IP "$MME_LOCAL_IP" '.mme.ip_addr=$MME_LOCAL_IP' config.json > config.tmp && mv config.tmp config.json
+jq --arg MME_LOCAL_IP "$MME_LOCAL_IP" '.s1ap.s1ap_local_addr=$MME_LOCAL_IP' config.json > config.tmp && mv config.tmp config.json
+jq --arg MME_LOCAL_IP "$MME_LOCAL_IP" '.s11.egtp_local_addr=$MME_LOCAL_IP' config.json > config.tmp && mv config.tmp config.json
+
+# Set SPGW-C address to the config
+SPGWC_POD={{ tuple "spgwc" "identity" . | include "omec-control-plane.endpoint_lookup" | quote }}
+SPGWC_ADDR=$(dig +short $SPGWC_POD)
+jq --arg SPGWC_ADDR "$SPGWC_ADDR" '.s11.sgw_addr //= $SPGWC_ADDR' config.json > config.tmp && mv config.tmp config.json
+jq --arg SPGWC_ADDR "$SPGWC_ADDR" '.s11.pgw_addr //= $SPGWC_ADDR' config.json > config.tmp && mv config.tmp config.json
+
+# Add additional redundant keys - should be fixed in openmme
+HSS_TYPE=$(jq -r '.s6a.host_type' config.json)
+HSS_HOST=$(jq -r '.s6a.host' config.json)
+jq --arg HSS_TYPE "$HSS_TYPE" '.s6a.hss_type=$HSS_TYPE' config.json > config.tmp && mv config.tmp config.json
+jq --arg HSS_HOST "$HSS_HOST" '.s6a.host_name=$HSS_HOST' config.json > config.tmp && mv config.tmp config.json
+
+# Copy the final configs for each applications
+cp /opt/mme/config/shared/config.json /opt/mme/config/shared/mme.json
+cp /opt/mme/config/shared/config.json /opt/mme/config/shared/s11.json
+cp /opt/mme/config/shared/config.json /opt/mme/config/shared/s1ap.json
+cp /opt/mme/config/shared/config.json /opt/mme/config/shared/s6a.json
+cp /opt/mme/config/s6a_fd.conf /opt/mme/config/shared/s6a_fd.conf
+
+# Generate certs
+MME_IDENTITY={{ tuple "mme" "identity" . | include "omec-control-plane.endpoint_lookup" | quote }};
+DIAMETER_HOST=$(echo $MME_IDENTITY | cut -d'.' -f1)
+DIAMETER_REALM={{ tuple "mme" "realm" . | include "omec-control-plane.endpoint_lookup" | quote }};
+
+cp /openmme/target/conf/make_certs.sh /opt/mme/config/shared/make_certs.sh
+cd /opt/mme/config/shared
+./make_certs.sh $DIAMETER_HOST $DIAMETER_REALM
diff --git a/omec/omec-control-plane/templates/bin/_mme-run.sh.tpl b/omec/omec-control-plane/templates/bin/_mme-run.sh.tpl
new file mode 100644
index 0000000..6b7718b
--- /dev/null
+++ b/omec/omec-control-plane/templates/bin/_mme-run.sh.tpl
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# Copyright 2019-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+APPLICATION=$1
+
+# copy config files to openmme target directly
+cp /opt/mme/config/shared/* /openmme/target/conf/
+
+cd /openmme/target
+export LD_LIBRARY_PATH=/usr/local/lib:./lib
+
+case $APPLICATION in
+    "mme-app")
+      echo "Starting mme-app"
+      echo "conf/mme.json"
+      cat conf/mme.json
+      ./bin/mme-app
+      ;;
+    "s1ap-app")
+      echo "Starting s1ap-app"
+      echo "conf/s1ap.json"
+      cat conf/s1ap.json
+      ./bin/s1ap-app
+      ;;
+    "s6a-app")
+      echo "Starting s6a-app"
+      echo "conf/s6a.json"
+      cat conf/s6a.json
+      echo "conf/s6a_fd.conf"
+      cat conf/s6a_fd.conf
+      ./bin/s6a-app
+      ;;
+    "s11-app")
+      echo "Starting s11-app"
+      echo "conf/s11.json"
+      cat conf/s11.json
+      ./bin/s11-app
+      ;;
+    *)
+      echo "invalid app $APPLICATION"
+      ;;
+esac