diff --git a/xos-profiles/ponsim-pod/tosca/010-att-workflow.yaml b/xos-profiles/ponsim-pod/tosca/010-att-workflow.yaml
new file mode 100644
index 0000000..1af0eb2
--- /dev/null
+++ b/xos-profiles/ponsim-pod/tosca/010-att-workflow.yaml
@@ -0,0 +1,43 @@
+---
+# Copyright 2018-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @oss-service.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+  - custom_types/servicedependency.yaml
+  - custom_types/voltservice.yaml
+  - custom_types/attworkflowdriverwhitelistentry.yaml
+  - custom_types/attworkflowdriverservice.yaml
+description: Create an instance of the OSS Service and connect it to the vOLT Service
+topology_template:
+  node_templates:
+
+    service#att:
+      type: tosca.nodes.AttWorkflowDriverService
+      properties:
+        name: att-workflow-driver
+        must-exist: true
+
+    whitelist:
+      type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+      properties:
+        serial_number: PSMO12345678
+        device_id: of:0000aabbccddeeff
+        pon_port_id: 1
+      requirements:
+        - owner:
+            node: service#att
+            relationship: tosca.relationships.BelongsToOne
diff --git a/xos-profiles/ponsim-pod/tosca/020-pod-olt.yaml b/xos-profiles/ponsim-pod/tosca/020-pod-olt.yaml
new file mode 100644
index 0000000..950fea3
--- /dev/null
+++ b/xos-profiles/ponsim-pod/tosca/020-pod-olt.yaml
@@ -0,0 +1,57 @@
+---
+# Copyright 2018-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+  - custom_types/oltdevice.yaml
+  - custom_types/onudevice.yaml
+  - custom_types/ponport.yaml
+  - custom_types/voltservice.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+  node_templates:
+
+    service#volt:
+      type: tosca.nodes.VOLTService
+      properties:
+        name: volt
+        must-exist: true
+
+    olt_device:
+      type: tosca.nodes.OLTDevice
+      properties:
+        name: PONSIM OLT
+        device_type: ponsim_olt
+        host: olt
+        port: 50060
+        switch_datapath_id: of:0000000000000001
+        switch_port: "2"
+        outer_tpid: "0x8100"
+        dp_id: of:0000aabbccddeeff
+        uplink: "2"
+      requirements:
+        - volt_service:
+            node: service#volt
+            relationship: tosca.relationships.BelongsToOne
+
+    pon_port:
+      type: tosca.nodes.PONPort
+      properties:
+        name: pon0
+        port_no: 1
+      requirements:
+        - olt_device:
+            node: olt_device
+            relationship: tosca.relationships.BelongsToOne
diff --git a/xos-profiles/ponsim-pod/tosca/030-fabric.yaml b/xos-profiles/ponsim-pod/tosca/030-fabric.yaml
new file mode 100644
index 0000000..9259a34
--- /dev/null
+++ b/xos-profiles/ponsim-pod/tosca/030-fabric.yaml
@@ -0,0 +1,67 @@
+---
+# Copyright 2018-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+  - custom_types/switch.yaml
+  - custom_types/switchport.yaml
+  - custom_types/portinterface.yaml
+  - custom_types/bngportmapping.yaml
+
+description: Configures the Ponsim SEBA POD with AT&T workflow
+
+topology_template:
+  node_templates:
+    # Fabric configuration
+    switch#leaf_1:
+      type: tosca.nodes.Switch
+      properties:
+        driver: ofdpa-ovs
+        ipv4Loopback: 192.168.0.201
+        ipv4NodeSid: 17
+        isEdgeRouter: True
+        name: leaf_1
+        ofId: of:0000000000000001
+        routerMac: 00:00:02:01:06:01
+
+    # Setup the OLT switch port
+    port#olt_port:
+      type: tosca.nodes.SwitchPort
+      properties:
+        portId: 2
+        host_learning: false
+      requirements:
+        - switch:
+            node: switch#leaf_1
+            relationship: tosca.relationships.BelongsToOne
+
+    # Port connected to the BNG
+    port#bng_port:
+      type: tosca.nodes.SwitchPort
+      properties:
+        portId: 1
+        host_learning: false
+      requirements:
+        - switch:
+            node: switch#leaf_1
+            relationship: tosca.relationships.BelongsToOne
+
+    # Setup the fabric switch port where the external
+    # router is connected to
+    bngmapping:
+      type: tosca.nodes.BNGPortMapping
+      properties:
+        s_tag: "any"
+        switch_port: 1
diff --git a/xos-profiles/ponsim-pod/tosca/040-subscriber.yaml b/xos-profiles/ponsim-pod/tosca/040-subscriber.yaml
new file mode 100644
index 0000000..cae3703
--- /dev/null
+++ b/xos-profiles/ponsim-pod/tosca/040-subscriber.yaml
@@ -0,0 +1,35 @@
+---
+# Copyright 2018-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+  - custom_types/rcordsubscriber.yaml
+
+description: Pre-provsion a subscriber
+
+topology_template:
+  node_templates:
+
+    # Pre-provision the subscriber the subscriber
+    my_house:
+      type: tosca.nodes.RCORDSubscriber
+      properties:
+        name: QQClient
+        status: pre-provisioned
+        c_tag: 111
+        s_tag: 222
+        onu_device: PSMO12345678
+        mac_address: 00:AA:00:00:00:01 # subscriber mac address
+        ip_address: 10.8.2.1 # subscriber IP