[VOL-3255] enhancement to support device metrics
Change-Id: Ic26c2db30a58943a4eef6276ae1cf40350d51702
diff --git a/vendor/google.golang.org/grpc/rpc_util.go b/vendor/google.golang.org/grpc/rpc_util.go
new file mode 100644
index 0000000..cf9dbe7
--- /dev/null
+++ b/vendor/google.golang.org/grpc/rpc_util.go
@@ -0,0 +1,889 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package grpc
+
+import (
+ "bytes"
+ "compress/gzip"
+ "context"
+ "encoding/binary"
+ "fmt"
+ "io"
+ "io/ioutil"
+ "math"
+ "net/url"
+ "strings"
+ "sync"
+ "time"
+
+ "google.golang.org/grpc/codes"
+ "google.golang.org/grpc/credentials"
+ "google.golang.org/grpc/encoding"
+ "google.golang.org/grpc/encoding/proto"
+ "google.golang.org/grpc/internal/transport"
+ "google.golang.org/grpc/metadata"
+ "google.golang.org/grpc/peer"
+ "google.golang.org/grpc/stats"
+ "google.golang.org/grpc/status"
+)
+
+// Compressor defines the interface gRPC uses to compress a message.
+//
+// Deprecated: use package encoding.
+type Compressor interface {
+ // Do compresses p into w.
+ Do(w io.Writer, p []byte) error
+ // Type returns the compression algorithm the Compressor uses.
+ Type() string
+}
+
+type gzipCompressor struct {
+ pool sync.Pool
+}
+
+// NewGZIPCompressor creates a Compressor based on GZIP.
+//
+// Deprecated: use package encoding/gzip.
+func NewGZIPCompressor() Compressor {
+ c, _ := NewGZIPCompressorWithLevel(gzip.DefaultCompression)
+ return c
+}
+
+// NewGZIPCompressorWithLevel is like NewGZIPCompressor but specifies the gzip compression level instead
+// of assuming DefaultCompression.
+//
+// The error returned will be nil if the level is valid.
+//
+// Deprecated: use package encoding/gzip.
+func NewGZIPCompressorWithLevel(level int) (Compressor, error) {
+ if level < gzip.DefaultCompression || level > gzip.BestCompression {
+ return nil, fmt.Errorf("grpc: invalid compression level: %d", level)
+ }
+ return &gzipCompressor{
+ pool: sync.Pool{
+ New: func() interface{} {
+ w, err := gzip.NewWriterLevel(ioutil.Discard, level)
+ if err != nil {
+ panic(err)
+ }
+ return w
+ },
+ },
+ }, nil
+}
+
+func (c *gzipCompressor) Do(w io.Writer, p []byte) error {
+ z := c.pool.Get().(*gzip.Writer)
+ defer c.pool.Put(z)
+ z.Reset(w)
+ if _, err := z.Write(p); err != nil {
+ return err
+ }
+ return z.Close()
+}
+
+func (c *gzipCompressor) Type() string {
+ return "gzip"
+}
+
+// Decompressor defines the interface gRPC uses to decompress a message.
+//
+// Deprecated: use package encoding.
+type Decompressor interface {
+ // Do reads the data from r and uncompress them.
+ Do(r io.Reader) ([]byte, error)
+ // Type returns the compression algorithm the Decompressor uses.
+ Type() string
+}
+
+type gzipDecompressor struct {
+ pool sync.Pool
+}
+
+// NewGZIPDecompressor creates a Decompressor based on GZIP.
+//
+// Deprecated: use package encoding/gzip.
+func NewGZIPDecompressor() Decompressor {
+ return &gzipDecompressor{}
+}
+
+func (d *gzipDecompressor) Do(r io.Reader) ([]byte, error) {
+ var z *gzip.Reader
+ switch maybeZ := d.pool.Get().(type) {
+ case nil:
+ newZ, err := gzip.NewReader(r)
+ if err != nil {
+ return nil, err
+ }
+ z = newZ
+ case *gzip.Reader:
+ z = maybeZ
+ if err := z.Reset(r); err != nil {
+ d.pool.Put(z)
+ return nil, err
+ }
+ }
+
+ defer func() {
+ z.Close()
+ d.pool.Put(z)
+ }()
+ return ioutil.ReadAll(z)
+}
+
+func (d *gzipDecompressor) Type() string {
+ return "gzip"
+}
+
+// callInfo contains all related configuration and information about an RPC.
+type callInfo struct {
+ compressorType string
+ failFast bool
+ stream ClientStream
+ maxReceiveMessageSize *int
+ maxSendMessageSize *int
+ creds credentials.PerRPCCredentials
+ contentSubtype string
+ codec baseCodec
+ maxRetryRPCBufferSize int
+}
+
+func defaultCallInfo() *callInfo {
+ return &callInfo{
+ failFast: true,
+ maxRetryRPCBufferSize: 256 * 1024, // 256KB
+ }
+}
+
+// CallOption configures a Call before it starts or extracts information from
+// a Call after it completes.
+type CallOption interface {
+ // before is called before the call is sent to any server. If before
+ // returns a non-nil error, the RPC fails with that error.
+ before(*callInfo) error
+
+ // after is called after the call has completed. after cannot return an
+ // error, so any failures should be reported via output parameters.
+ after(*callInfo)
+}
+
+// EmptyCallOption does not alter the Call configuration.
+// It can be embedded in another structure to carry satellite data for use
+// by interceptors.
+type EmptyCallOption struct{}
+
+func (EmptyCallOption) before(*callInfo) error { return nil }
+func (EmptyCallOption) after(*callInfo) {}
+
+// Header returns a CallOptions that retrieves the header metadata
+// for a unary RPC.
+func Header(md *metadata.MD) CallOption {
+ return HeaderCallOption{HeaderAddr: md}
+}
+
+// HeaderCallOption is a CallOption for collecting response header metadata.
+// The metadata field will be populated *after* the RPC completes.
+// This is an EXPERIMENTAL API.
+type HeaderCallOption struct {
+ HeaderAddr *metadata.MD
+}
+
+func (o HeaderCallOption) before(c *callInfo) error { return nil }
+func (o HeaderCallOption) after(c *callInfo) {
+ if c.stream != nil {
+ *o.HeaderAddr, _ = c.stream.Header()
+ }
+}
+
+// Trailer returns a CallOptions that retrieves the trailer metadata
+// for a unary RPC.
+func Trailer(md *metadata.MD) CallOption {
+ return TrailerCallOption{TrailerAddr: md}
+}
+
+// TrailerCallOption is a CallOption for collecting response trailer metadata.
+// The metadata field will be populated *after* the RPC completes.
+// This is an EXPERIMENTAL API.
+type TrailerCallOption struct {
+ TrailerAddr *metadata.MD
+}
+
+func (o TrailerCallOption) before(c *callInfo) error { return nil }
+func (o TrailerCallOption) after(c *callInfo) {
+ if c.stream != nil {
+ *o.TrailerAddr = c.stream.Trailer()
+ }
+}
+
+// Peer returns a CallOption that retrieves peer information for a unary RPC.
+// The peer field will be populated *after* the RPC completes.
+func Peer(p *peer.Peer) CallOption {
+ return PeerCallOption{PeerAddr: p}
+}
+
+// PeerCallOption is a CallOption for collecting the identity of the remote
+// peer. The peer field will be populated *after* the RPC completes.
+// This is an EXPERIMENTAL API.
+type PeerCallOption struct {
+ PeerAddr *peer.Peer
+}
+
+func (o PeerCallOption) before(c *callInfo) error { return nil }
+func (o PeerCallOption) after(c *callInfo) {
+ if c.stream != nil {
+ if x, ok := peer.FromContext(c.stream.Context()); ok {
+ *o.PeerAddr = *x
+ }
+ }
+}
+
+// WaitForReady configures the action to take when an RPC is attempted on broken
+// connections or unreachable servers. If waitForReady is false, the RPC will fail
+// immediately. Otherwise, the RPC client will block the call until a
+// connection is available (or the call is canceled or times out) and will
+// retry the call if it fails due to a transient error. gRPC will not retry if
+// data was written to the wire unless the server indicates it did not process
+// the data. Please refer to
+// https://github.com/grpc/grpc/blob/master/doc/wait-for-ready.md.
+//
+// By default, RPCs don't "wait for ready".
+func WaitForReady(waitForReady bool) CallOption {
+ return FailFastCallOption{FailFast: !waitForReady}
+}
+
+// FailFast is the opposite of WaitForReady.
+//
+// Deprecated: use WaitForReady.
+func FailFast(failFast bool) CallOption {
+ return FailFastCallOption{FailFast: failFast}
+}
+
+// FailFastCallOption is a CallOption for indicating whether an RPC should fail
+// fast or not.
+// This is an EXPERIMENTAL API.
+type FailFastCallOption struct {
+ FailFast bool
+}
+
+func (o FailFastCallOption) before(c *callInfo) error {
+ c.failFast = o.FailFast
+ return nil
+}
+func (o FailFastCallOption) after(c *callInfo) {}
+
+// MaxCallRecvMsgSize returns a CallOption which sets the maximum message size
+// in bytes the client can receive.
+func MaxCallRecvMsgSize(bytes int) CallOption {
+ return MaxRecvMsgSizeCallOption{MaxRecvMsgSize: bytes}
+}
+
+// MaxRecvMsgSizeCallOption is a CallOption that indicates the maximum message
+// size in bytes the client can receive.
+// This is an EXPERIMENTAL API.
+type MaxRecvMsgSizeCallOption struct {
+ MaxRecvMsgSize int
+}
+
+func (o MaxRecvMsgSizeCallOption) before(c *callInfo) error {
+ c.maxReceiveMessageSize = &o.MaxRecvMsgSize
+ return nil
+}
+func (o MaxRecvMsgSizeCallOption) after(c *callInfo) {}
+
+// MaxCallSendMsgSize returns a CallOption which sets the maximum message size
+// in bytes the client can send.
+func MaxCallSendMsgSize(bytes int) CallOption {
+ return MaxSendMsgSizeCallOption{MaxSendMsgSize: bytes}
+}
+
+// MaxSendMsgSizeCallOption is a CallOption that indicates the maximum message
+// size in bytes the client can send.
+// This is an EXPERIMENTAL API.
+type MaxSendMsgSizeCallOption struct {
+ MaxSendMsgSize int
+}
+
+func (o MaxSendMsgSizeCallOption) before(c *callInfo) error {
+ c.maxSendMessageSize = &o.MaxSendMsgSize
+ return nil
+}
+func (o MaxSendMsgSizeCallOption) after(c *callInfo) {}
+
+// PerRPCCredentials returns a CallOption that sets credentials.PerRPCCredentials
+// for a call.
+func PerRPCCredentials(creds credentials.PerRPCCredentials) CallOption {
+ return PerRPCCredsCallOption{Creds: creds}
+}
+
+// PerRPCCredsCallOption is a CallOption that indicates the per-RPC
+// credentials to use for the call.
+// This is an EXPERIMENTAL API.
+type PerRPCCredsCallOption struct {
+ Creds credentials.PerRPCCredentials
+}
+
+func (o PerRPCCredsCallOption) before(c *callInfo) error {
+ c.creds = o.Creds
+ return nil
+}
+func (o PerRPCCredsCallOption) after(c *callInfo) {}
+
+// UseCompressor returns a CallOption which sets the compressor used when
+// sending the request. If WithCompressor is also set, UseCompressor has
+// higher priority.
+//
+// This API is EXPERIMENTAL.
+func UseCompressor(name string) CallOption {
+ return CompressorCallOption{CompressorType: name}
+}
+
+// CompressorCallOption is a CallOption that indicates the compressor to use.
+// This is an EXPERIMENTAL API.
+type CompressorCallOption struct {
+ CompressorType string
+}
+
+func (o CompressorCallOption) before(c *callInfo) error {
+ c.compressorType = o.CompressorType
+ return nil
+}
+func (o CompressorCallOption) after(c *callInfo) {}
+
+// CallContentSubtype returns a CallOption that will set the content-subtype
+// for a call. For example, if content-subtype is "json", the Content-Type over
+// the wire will be "application/grpc+json". The content-subtype is converted
+// to lowercase before being included in Content-Type. See Content-Type on
+// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for
+// more details.
+//
+// If ForceCodec is not also used, the content-subtype will be used to look up
+// the Codec to use in the registry controlled by RegisterCodec. See the
+// documentation on RegisterCodec for details on registration. The lookup of
+// content-subtype is case-insensitive. If no such Codec is found, the call
+// will result in an error with code codes.Internal.
+//
+// If ForceCodec is also used, that Codec will be used for all request and
+// response messages, with the content-subtype set to the given contentSubtype
+// here for requests.
+func CallContentSubtype(contentSubtype string) CallOption {
+ return ContentSubtypeCallOption{ContentSubtype: strings.ToLower(contentSubtype)}
+}
+
+// ContentSubtypeCallOption is a CallOption that indicates the content-subtype
+// used for marshaling messages.
+// This is an EXPERIMENTAL API.
+type ContentSubtypeCallOption struct {
+ ContentSubtype string
+}
+
+func (o ContentSubtypeCallOption) before(c *callInfo) error {
+ c.contentSubtype = o.ContentSubtype
+ return nil
+}
+func (o ContentSubtypeCallOption) after(c *callInfo) {}
+
+// ForceCodec returns a CallOption that will set the given Codec to be
+// used for all request and response messages for a call. The result of calling
+// String() will be used as the content-subtype in a case-insensitive manner.
+//
+// See Content-Type on
+// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for
+// more details. Also see the documentation on RegisterCodec and
+// CallContentSubtype for more details on the interaction between Codec and
+// content-subtype.
+//
+// This function is provided for advanced users; prefer to use only
+// CallContentSubtype to select a registered codec instead.
+//
+// This is an EXPERIMENTAL API.
+func ForceCodec(codec encoding.Codec) CallOption {
+ return ForceCodecCallOption{Codec: codec}
+}
+
+// ForceCodecCallOption is a CallOption that indicates the codec used for
+// marshaling messages.
+//
+// This is an EXPERIMENTAL API.
+type ForceCodecCallOption struct {
+ Codec encoding.Codec
+}
+
+func (o ForceCodecCallOption) before(c *callInfo) error {
+ c.codec = o.Codec
+ return nil
+}
+func (o ForceCodecCallOption) after(c *callInfo) {}
+
+// CallCustomCodec behaves like ForceCodec, but accepts a grpc.Codec instead of
+// an encoding.Codec.
+//
+// Deprecated: use ForceCodec instead.
+func CallCustomCodec(codec Codec) CallOption {
+ return CustomCodecCallOption{Codec: codec}
+}
+
+// CustomCodecCallOption is a CallOption that indicates the codec used for
+// marshaling messages.
+//
+// This is an EXPERIMENTAL API.
+type CustomCodecCallOption struct {
+ Codec Codec
+}
+
+func (o CustomCodecCallOption) before(c *callInfo) error {
+ c.codec = o.Codec
+ return nil
+}
+func (o CustomCodecCallOption) after(c *callInfo) {}
+
+// MaxRetryRPCBufferSize returns a CallOption that limits the amount of memory
+// used for buffering this RPC's requests for retry purposes.
+//
+// This API is EXPERIMENTAL.
+func MaxRetryRPCBufferSize(bytes int) CallOption {
+ return MaxRetryRPCBufferSizeCallOption{bytes}
+}
+
+// MaxRetryRPCBufferSizeCallOption is a CallOption indicating the amount of
+// memory to be used for caching this RPC for retry purposes.
+// This is an EXPERIMENTAL API.
+type MaxRetryRPCBufferSizeCallOption struct {
+ MaxRetryRPCBufferSize int
+}
+
+func (o MaxRetryRPCBufferSizeCallOption) before(c *callInfo) error {
+ c.maxRetryRPCBufferSize = o.MaxRetryRPCBufferSize
+ return nil
+}
+func (o MaxRetryRPCBufferSizeCallOption) after(c *callInfo) {}
+
+// The format of the payload: compressed or not?
+type payloadFormat uint8
+
+const (
+ compressionNone payloadFormat = 0 // no compression
+ compressionMade payloadFormat = 1 // compressed
+)
+
+// parser reads complete gRPC messages from the underlying reader.
+type parser struct {
+ // r is the underlying reader.
+ // See the comment on recvMsg for the permissible
+ // error types.
+ r io.Reader
+
+ // The header of a gRPC message. Find more detail at
+ // https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md
+ header [5]byte
+}
+
+// recvMsg reads a complete gRPC message from the stream.
+//
+// It returns the message and its payload (compression/encoding)
+// format. The caller owns the returned msg memory.
+//
+// If there is an error, possible values are:
+// * io.EOF, when no messages remain
+// * io.ErrUnexpectedEOF
+// * of type transport.ConnectionError
+// * an error from the status package
+// No other error values or types must be returned, which also means
+// that the underlying io.Reader must not return an incompatible
+// error.
+func (p *parser) recvMsg(maxReceiveMessageSize int) (pf payloadFormat, msg []byte, err error) {
+ if _, err := p.r.Read(p.header[:]); err != nil {
+ return 0, nil, err
+ }
+
+ pf = payloadFormat(p.header[0])
+ length := binary.BigEndian.Uint32(p.header[1:])
+
+ if length == 0 {
+ return pf, nil, nil
+ }
+ if int64(length) > int64(maxInt) {
+ return 0, nil, status.Errorf(codes.ResourceExhausted, "grpc: received message larger than max length allowed on current machine (%d vs. %d)", length, maxInt)
+ }
+ if int(length) > maxReceiveMessageSize {
+ return 0, nil, status.Errorf(codes.ResourceExhausted, "grpc: received message larger than max (%d vs. %d)", length, maxReceiveMessageSize)
+ }
+ // TODO(bradfitz,zhaoq): garbage. reuse buffer after proto decoding instead
+ // of making it for each message:
+ msg = make([]byte, int(length))
+ if _, err := p.r.Read(msg); err != nil {
+ if err == io.EOF {
+ err = io.ErrUnexpectedEOF
+ }
+ return 0, nil, err
+ }
+ return pf, msg, nil
+}
+
+// encode serializes msg and returns a buffer containing the message, or an
+// error if it is too large to be transmitted by grpc. If msg is nil, it
+// generates an empty message.
+func encode(c baseCodec, msg interface{}) ([]byte, error) {
+ if msg == nil { // NOTE: typed nils will not be caught by this check
+ return nil, nil
+ }
+ b, err := c.Marshal(msg)
+ if err != nil {
+ return nil, status.Errorf(codes.Internal, "grpc: error while marshaling: %v", err.Error())
+ }
+ if uint(len(b)) > math.MaxUint32 {
+ return nil, status.Errorf(codes.ResourceExhausted, "grpc: message too large (%d bytes)", len(b))
+ }
+ return b, nil
+}
+
+// compress returns the input bytes compressed by compressor or cp. If both
+// compressors are nil, returns nil.
+//
+// TODO(dfawley): eliminate cp parameter by wrapping Compressor in an encoding.Compressor.
+func compress(in []byte, cp Compressor, compressor encoding.Compressor) ([]byte, error) {
+ if compressor == nil && cp == nil {
+ return nil, nil
+ }
+ wrapErr := func(err error) error {
+ return status.Errorf(codes.Internal, "grpc: error while compressing: %v", err.Error())
+ }
+ cbuf := &bytes.Buffer{}
+ if compressor != nil {
+ z, err := compressor.Compress(cbuf)
+ if err != nil {
+ return nil, wrapErr(err)
+ }
+ if _, err := z.Write(in); err != nil {
+ return nil, wrapErr(err)
+ }
+ if err := z.Close(); err != nil {
+ return nil, wrapErr(err)
+ }
+ } else {
+ if err := cp.Do(cbuf, in); err != nil {
+ return nil, wrapErr(err)
+ }
+ }
+ return cbuf.Bytes(), nil
+}
+
+const (
+ payloadLen = 1
+ sizeLen = 4
+ headerLen = payloadLen + sizeLen
+)
+
+// msgHeader returns a 5-byte header for the message being transmitted and the
+// payload, which is compData if non-nil or data otherwise.
+func msgHeader(data, compData []byte) (hdr []byte, payload []byte) {
+ hdr = make([]byte, headerLen)
+ if compData != nil {
+ hdr[0] = byte(compressionMade)
+ data = compData
+ } else {
+ hdr[0] = byte(compressionNone)
+ }
+
+ // Write length of payload into buf
+ binary.BigEndian.PutUint32(hdr[payloadLen:], uint32(len(data)))
+ return hdr, data
+}
+
+func outPayload(client bool, msg interface{}, data, payload []byte, t time.Time) *stats.OutPayload {
+ return &stats.OutPayload{
+ Client: client,
+ Payload: msg,
+ Data: data,
+ Length: len(data),
+ WireLength: len(payload) + headerLen,
+ SentTime: t,
+ }
+}
+
+func checkRecvPayload(pf payloadFormat, recvCompress string, haveCompressor bool) *status.Status {
+ switch pf {
+ case compressionNone:
+ case compressionMade:
+ if recvCompress == "" || recvCompress == encoding.Identity {
+ return status.New(codes.Internal, "grpc: compressed flag set with identity or empty encoding")
+ }
+ if !haveCompressor {
+ return status.Newf(codes.Unimplemented, "grpc: Decompressor is not installed for grpc-encoding %q", recvCompress)
+ }
+ default:
+ return status.Newf(codes.Internal, "grpc: received unexpected payload format %d", pf)
+ }
+ return nil
+}
+
+type payloadInfo struct {
+ wireLength int // The compressed length got from wire.
+ uncompressedBytes []byte
+}
+
+func recvAndDecompress(p *parser, s *transport.Stream, dc Decompressor, maxReceiveMessageSize int, payInfo *payloadInfo, compressor encoding.Compressor) ([]byte, error) {
+ pf, d, err := p.recvMsg(maxReceiveMessageSize)
+ if err != nil {
+ return nil, err
+ }
+ if payInfo != nil {
+ payInfo.wireLength = len(d)
+ }
+
+ if st := checkRecvPayload(pf, s.RecvCompress(), compressor != nil || dc != nil); st != nil {
+ return nil, st.Err()
+ }
+
+ var size int
+ if pf == compressionMade {
+ // To match legacy behavior, if the decompressor is set by WithDecompressor or RPCDecompressor,
+ // use this decompressor as the default.
+ if dc != nil {
+ d, err = dc.Do(bytes.NewReader(d))
+ size = len(d)
+ } else {
+ d, size, err = decompress(compressor, d, maxReceiveMessageSize)
+ }
+ if err != nil {
+ return nil, status.Errorf(codes.Internal, "grpc: failed to decompress the received message %v", err)
+ }
+ } else {
+ size = len(d)
+ }
+ if size > maxReceiveMessageSize {
+ // TODO: Revisit the error code. Currently keep it consistent with java
+ // implementation.
+ return nil, status.Errorf(codes.ResourceExhausted, "grpc: received message larger than max (%d vs. %d)", size, maxReceiveMessageSize)
+ }
+ return d, nil
+}
+
+// Using compressor, decompress d, returning data and size.
+// Optionally, if data will be over maxReceiveMessageSize, just return the size.
+func decompress(compressor encoding.Compressor, d []byte, maxReceiveMessageSize int) ([]byte, int, error) {
+ dcReader, err := compressor.Decompress(bytes.NewReader(d))
+ if err != nil {
+ return nil, 0, err
+ }
+ if sizer, ok := compressor.(interface {
+ DecompressedSize(compressedBytes []byte) int
+ }); ok {
+ if size := sizer.DecompressedSize(d); size >= 0 {
+ if size > maxReceiveMessageSize {
+ return nil, size, nil
+ }
+ // size is used as an estimate to size the buffer, but we
+ // will read more data if available.
+ // +MinRead so ReadFrom will not reallocate if size is correct.
+ buf := bytes.NewBuffer(make([]byte, 0, size+bytes.MinRead))
+ bytesRead, err := buf.ReadFrom(io.LimitReader(dcReader, int64(maxReceiveMessageSize)+1))
+ return buf.Bytes(), int(bytesRead), err
+ }
+ }
+ // Read from LimitReader with limit max+1. So if the underlying
+ // reader is over limit, the result will be bigger than max.
+ d, err = ioutil.ReadAll(io.LimitReader(dcReader, int64(maxReceiveMessageSize)+1))
+ return d, len(d), err
+}
+
+// For the two compressor parameters, both should not be set, but if they are,
+// dc takes precedence over compressor.
+// TODO(dfawley): wrap the old compressor/decompressor using the new API?
+func recv(p *parser, c baseCodec, s *transport.Stream, dc Decompressor, m interface{}, maxReceiveMessageSize int, payInfo *payloadInfo, compressor encoding.Compressor) error {
+ d, err := recvAndDecompress(p, s, dc, maxReceiveMessageSize, payInfo, compressor)
+ if err != nil {
+ return err
+ }
+ if err := c.Unmarshal(d, m); err != nil {
+ return status.Errorf(codes.Internal, "grpc: failed to unmarshal the received message %v", err)
+ }
+ if payInfo != nil {
+ payInfo.uncompressedBytes = d
+ }
+ return nil
+}
+
+// Information about RPC
+type rpcInfo struct {
+ failfast bool
+ preloaderInfo *compressorInfo
+}
+
+// Information about Preloader
+// Responsible for storing codec, and compressors
+// If stream (s) has context s.Context which stores rpcInfo that has non nil
+// pointers to codec, and compressors, then we can use preparedMsg for Async message prep
+// and reuse marshalled bytes
+type compressorInfo struct {
+ codec baseCodec
+ cp Compressor
+ comp encoding.Compressor
+}
+
+type rpcInfoContextKey struct{}
+
+func newContextWithRPCInfo(ctx context.Context, failfast bool, codec baseCodec, cp Compressor, comp encoding.Compressor) context.Context {
+ return context.WithValue(ctx, rpcInfoContextKey{}, &rpcInfo{
+ failfast: failfast,
+ preloaderInfo: &compressorInfo{
+ codec: codec,
+ cp: cp,
+ comp: comp,
+ },
+ })
+}
+
+func rpcInfoFromContext(ctx context.Context) (s *rpcInfo, ok bool) {
+ s, ok = ctx.Value(rpcInfoContextKey{}).(*rpcInfo)
+ return
+}
+
+// Code returns the error code for err if it was produced by the rpc system.
+// Otherwise, it returns codes.Unknown.
+//
+// Deprecated: use status.Code instead.
+func Code(err error) codes.Code {
+ return status.Code(err)
+}
+
+// ErrorDesc returns the error description of err if it was produced by the rpc system.
+// Otherwise, it returns err.Error() or empty string when err is nil.
+//
+// Deprecated: use status.Convert and Message method instead.
+func ErrorDesc(err error) string {
+ return status.Convert(err).Message()
+}
+
+// Errorf returns an error containing an error code and a description;
+// Errorf returns nil if c is OK.
+//
+// Deprecated: use status.Errorf instead.
+func Errorf(c codes.Code, format string, a ...interface{}) error {
+ return status.Errorf(c, format, a...)
+}
+
+// toRPCErr converts an error into an error from the status package.
+func toRPCErr(err error) error {
+ if err == nil || err == io.EOF {
+ return err
+ }
+ if err == io.ErrUnexpectedEOF {
+ return status.Error(codes.Internal, err.Error())
+ }
+ if _, ok := status.FromError(err); ok {
+ return err
+ }
+ switch e := err.(type) {
+ case transport.ConnectionError:
+ return status.Error(codes.Unavailable, e.Desc)
+ default:
+ switch err {
+ case context.DeadlineExceeded:
+ return status.Error(codes.DeadlineExceeded, err.Error())
+ case context.Canceled:
+ return status.Error(codes.Canceled, err.Error())
+ }
+ }
+ return status.Error(codes.Unknown, err.Error())
+}
+
+// setCallInfoCodec should only be called after CallOptions have been applied.
+func setCallInfoCodec(c *callInfo) error {
+ if c.codec != nil {
+ // codec was already set by a CallOption; use it.
+ return nil
+ }
+
+ if c.contentSubtype == "" {
+ // No codec specified in CallOptions; use proto by default.
+ c.codec = encoding.GetCodec(proto.Name)
+ return nil
+ }
+
+ // c.contentSubtype is already lowercased in CallContentSubtype
+ c.codec = encoding.GetCodec(c.contentSubtype)
+ if c.codec == nil {
+ return status.Errorf(codes.Internal, "no codec registered for content-subtype %s", c.contentSubtype)
+ }
+ return nil
+}
+
+// parseDialTarget returns the network and address to pass to dialer
+func parseDialTarget(target string) (net string, addr string) {
+ net = "tcp"
+
+ m1 := strings.Index(target, ":")
+ m2 := strings.Index(target, ":/")
+
+ // handle unix:addr which will fail with url.Parse
+ if m1 >= 0 && m2 < 0 {
+ if n := target[0:m1]; n == "unix" {
+ net = n
+ addr = target[m1+1:]
+ return net, addr
+ }
+ }
+ if m2 >= 0 {
+ t, err := url.Parse(target)
+ if err != nil {
+ return net, target
+ }
+ scheme := t.Scheme
+ addr = t.Path
+ if scheme == "unix" {
+ net = scheme
+ if addr == "" {
+ addr = t.Host
+ }
+ return net, addr
+ }
+ }
+
+ return net, target
+}
+
+// channelzData is used to store channelz related data for ClientConn, addrConn and Server.
+// These fields cannot be embedded in the original structs (e.g. ClientConn), since to do atomic
+// operation on int64 variable on 32-bit machine, user is responsible to enforce memory alignment.
+// Here, by grouping those int64 fields inside a struct, we are enforcing the alignment.
+type channelzData struct {
+ callsStarted int64
+ callsFailed int64
+ callsSucceeded int64
+ // lastCallStartedTime stores the timestamp that last call starts. It is of int64 type instead of
+ // time.Time since it's more costly to atomically update time.Time variable than int64 variable.
+ lastCallStartedTime int64
+}
+
+// The SupportPackageIsVersion variables are referenced from generated protocol
+// buffer files to ensure compatibility with the gRPC version used. The latest
+// support package version is 6.
+//
+// Older versions are kept for compatibility. They may be removed if
+// compatibility cannot be maintained.
+//
+// These constants should not be referenced from any other code.
+const (
+ SupportPackageIsVersion3 = true
+ SupportPackageIsVersion4 = true
+ SupportPackageIsVersion5 = true
+ SupportPackageIsVersion6 = true
+)
+
+const grpcUA = "grpc-go/" + Version