diff --git a/vendor/github.com/golang/snappy/AUTHORS b/vendor/github.com/golang/snappy/AUTHORS
index bcfa195..52ccb5a 100644
--- a/vendor/github.com/golang/snappy/AUTHORS
+++ b/vendor/github.com/golang/snappy/AUTHORS
@@ -8,8 +8,11 @@
 
 # Please keep the list sorted.
 
+Amazon.com, Inc
 Damian Gryski <dgryski@gmail.com>
+Eric Buth <eric@topos.com>
 Google Inc.
 Jan Mercl <0xjnml@gmail.com>
+Klaus Post <klauspost@gmail.com>
 Rodolfo Carvalho <rhcarvalho@gmail.com>
 Sebastien Binet <seb.binet@gmail.com>
diff --git a/vendor/github.com/golang/snappy/CONTRIBUTORS b/vendor/github.com/golang/snappy/CONTRIBUTORS
index 931ae31..ea6524d 100644
--- a/vendor/github.com/golang/snappy/CONTRIBUTORS
+++ b/vendor/github.com/golang/snappy/CONTRIBUTORS
@@ -26,9 +26,13 @@
 
 # Please keep the list sorted.
 
+Alex Legg <alexlegg@google.com>
 Damian Gryski <dgryski@gmail.com>
+Eric Buth <eric@topos.com>
 Jan Mercl <0xjnml@gmail.com>
+Jonathan Swinney <jswinney@amazon.com>
 Kai Backman <kaib@golang.org>
+Klaus Post <klauspost@gmail.com>
 Marc-Antoine Ruel <maruel@chromium.org>
 Nigel Tao <nigeltao@golang.org>
 Rob Pike <r@golang.org>
diff --git a/vendor/github.com/golang/snappy/decode.go b/vendor/github.com/golang/snappy/decode.go
index 72efb03..23c6e26 100644
--- a/vendor/github.com/golang/snappy/decode.go
+++ b/vendor/github.com/golang/snappy/decode.go
@@ -52,6 +52,8 @@
 // Otherwise, a newly allocated slice will be returned.
 //
 // The dst and src must not overlap. It is valid to pass a nil dst.
+//
+// Decode handles the Snappy block format, not the Snappy stream format.
 func Decode(dst, src []byte) ([]byte, error) {
 	dLen, s, err := decodedLen(src)
 	if err != nil {
@@ -83,6 +85,8 @@
 }
 
 // Reader is an io.Reader that can read Snappy-compressed bytes.
+//
+// Reader handles the Snappy stream format, not the Snappy block format.
 type Reader struct {
 	r       io.Reader
 	err     error
@@ -114,32 +118,23 @@
 	return true
 }
 
-// Read satisfies the io.Reader interface.
-func (r *Reader) Read(p []byte) (int, error) {
-	if r.err != nil {
-		return 0, r.err
-	}
-	for {
-		if r.i < r.j {
-			n := copy(p, r.decoded[r.i:r.j])
-			r.i += n
-			return n, nil
-		}
+func (r *Reader) fill() error {
+	for r.i >= r.j {
 		if !r.readFull(r.buf[:4], true) {
-			return 0, r.err
+			return r.err
 		}
 		chunkType := r.buf[0]
 		if !r.readHeader {
 			if chunkType != chunkTypeStreamIdentifier {
 				r.err = ErrCorrupt
-				return 0, r.err
+				return r.err
 			}
 			r.readHeader = true
 		}
 		chunkLen := int(r.buf[1]) | int(r.buf[2])<<8 | int(r.buf[3])<<16
 		if chunkLen > len(r.buf) {
 			r.err = ErrUnsupported
-			return 0, r.err
+			return r.err
 		}
 
 		// The chunk types are specified at
@@ -149,11 +144,11 @@
 			// Section 4.2. Compressed data (chunk type 0x00).
 			if chunkLen < checksumSize {
 				r.err = ErrCorrupt
-				return 0, r.err
+				return r.err
 			}
 			buf := r.buf[:chunkLen]
 			if !r.readFull(buf, false) {
-				return 0, r.err
+				return r.err
 			}
 			checksum := uint32(buf[0]) | uint32(buf[1])<<8 | uint32(buf[2])<<16 | uint32(buf[3])<<24
 			buf = buf[checksumSize:]
@@ -161,19 +156,19 @@
 			n, err := DecodedLen(buf)
 			if err != nil {
 				r.err = err
-				return 0, r.err
+				return r.err
 			}
 			if n > len(r.decoded) {
 				r.err = ErrCorrupt
-				return 0, r.err
+				return r.err
 			}
 			if _, err := Decode(r.decoded, buf); err != nil {
 				r.err = err
-				return 0, r.err
+				return r.err
 			}
 			if crc(r.decoded[:n]) != checksum {
 				r.err = ErrCorrupt
-				return 0, r.err
+				return r.err
 			}
 			r.i, r.j = 0, n
 			continue
@@ -182,25 +177,25 @@
 			// Section 4.3. Uncompressed data (chunk type 0x01).
 			if chunkLen < checksumSize {
 				r.err = ErrCorrupt
-				return 0, r.err
+				return r.err
 			}
 			buf := r.buf[:checksumSize]
 			if !r.readFull(buf, false) {
-				return 0, r.err
+				return r.err
 			}
 			checksum := uint32(buf[0]) | uint32(buf[1])<<8 | uint32(buf[2])<<16 | uint32(buf[3])<<24
 			// Read directly into r.decoded instead of via r.buf.
 			n := chunkLen - checksumSize
 			if n > len(r.decoded) {
 				r.err = ErrCorrupt
-				return 0, r.err
+				return r.err
 			}
 			if !r.readFull(r.decoded[:n], false) {
-				return 0, r.err
+				return r.err
 			}
 			if crc(r.decoded[:n]) != checksum {
 				r.err = ErrCorrupt
-				return 0, r.err
+				return r.err
 			}
 			r.i, r.j = 0, n
 			continue
@@ -209,15 +204,15 @@
 			// Section 4.1. Stream identifier (chunk type 0xff).
 			if chunkLen != len(magicBody) {
 				r.err = ErrCorrupt
-				return 0, r.err
+				return r.err
 			}
 			if !r.readFull(r.buf[:len(magicBody)], false) {
-				return 0, r.err
+				return r.err
 			}
 			for i := 0; i < len(magicBody); i++ {
 				if r.buf[i] != magicBody[i] {
 					r.err = ErrCorrupt
-					return 0, r.err
+					return r.err
 				}
 			}
 			continue
@@ -226,12 +221,44 @@
 		if chunkType <= 0x7f {
 			// Section 4.5. Reserved unskippable chunks (chunk types 0x02-0x7f).
 			r.err = ErrUnsupported
-			return 0, r.err
+			return r.err
 		}
 		// Section 4.4 Padding (chunk type 0xfe).
 		// Section 4.6. Reserved skippable chunks (chunk types 0x80-0xfd).
 		if !r.readFull(r.buf[:chunkLen], false) {
-			return 0, r.err
+			return r.err
 		}
 	}
+
+	return nil
+}
+
+// Read satisfies the io.Reader interface.
+func (r *Reader) Read(p []byte) (int, error) {
+	if r.err != nil {
+		return 0, r.err
+	}
+
+	if err := r.fill(); err != nil {
+		return 0, err
+	}
+
+	n := copy(p, r.decoded[r.i:r.j])
+	r.i += n
+	return n, nil
+}
+
+// ReadByte satisfies the io.ByteReader interface.
+func (r *Reader) ReadByte() (byte, error) {
+	if r.err != nil {
+		return 0, r.err
+	}
+
+	if err := r.fill(); err != nil {
+		return 0, err
+	}
+
+	c := r.decoded[r.i]
+	r.i++
+	return c, nil
 }
diff --git a/vendor/github.com/golang/snappy/decode_arm64.s b/vendor/github.com/golang/snappy/decode_arm64.s
new file mode 100644
index 0000000..7a3ead1
--- /dev/null
+++ b/vendor/github.com/golang/snappy/decode_arm64.s
@@ -0,0 +1,494 @@
+// Copyright 2020 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+
+#include "textflag.h"
+
+// The asm code generally follows the pure Go code in decode_other.go, except
+// where marked with a "!!!".
+
+// func decode(dst, src []byte) int
+//
+// All local variables fit into registers. The non-zero stack size is only to
+// spill registers and push args when issuing a CALL. The register allocation:
+//	- R2	scratch
+//	- R3	scratch
+//	- R4	length or x
+//	- R5	offset
+//	- R6	&src[s]
+//	- R7	&dst[d]
+//	+ R8	dst_base
+//	+ R9	dst_len
+//	+ R10	dst_base + dst_len
+//	+ R11	src_base
+//	+ R12	src_len
+//	+ R13	src_base + src_len
+//	- R14	used by doCopy
+//	- R15	used by doCopy
+//
+// The registers R8-R13 (marked with a "+") are set at the start of the
+// function, and after a CALL returns, and are not otherwise modified.
+//
+// The d variable is implicitly R7 - R8,  and len(dst)-d is R10 - R7.
+// The s variable is implicitly R6 - R11, and len(src)-s is R13 - R6.
+TEXT ·decode(SB), NOSPLIT, $56-56
+	// Initialize R6, R7 and R8-R13.
+	MOVD dst_base+0(FP), R8
+	MOVD dst_len+8(FP), R9
+	MOVD R8, R7
+	MOVD R8, R10
+	ADD  R9, R10, R10
+	MOVD src_base+24(FP), R11
+	MOVD src_len+32(FP), R12
+	MOVD R11, R6
+	MOVD R11, R13
+	ADD  R12, R13, R13
+
+loop:
+	// for s < len(src)
+	CMP R13, R6
+	BEQ end
+
+	// R4 = uint32(src[s])
+	//
+	// switch src[s] & 0x03
+	MOVBU (R6), R4
+	MOVW  R4, R3
+	ANDW  $3, R3
+	MOVW  $1, R1
+	CMPW  R1, R3
+	BGE   tagCopy
+
+	// ----------------------------------------
+	// The code below handles literal tags.
+
+	// case tagLiteral:
+	// x := uint32(src[s] >> 2)
+	// switch
+	MOVW $60, R1
+	LSRW $2, R4, R4
+	CMPW R4, R1
+	BLS  tagLit60Plus
+
+	// case x < 60:
+	// s++
+	ADD $1, R6, R6
+
+doLit:
+	// This is the end of the inner "switch", when we have a literal tag.
+	//
+	// We assume that R4 == x and x fits in a uint32, where x is the variable
+	// used in the pure Go decode_other.go code.
+
+	// length = int(x) + 1
+	//
+	// Unlike the pure Go code, we don't need to check if length <= 0 because
+	// R4 can hold 64 bits, so the increment cannot overflow.
+	ADD $1, R4, R4
+
+	// Prepare to check if copying length bytes will run past the end of dst or
+	// src.
+	//
+	// R2 = len(dst) - d
+	// R3 = len(src) - s
+	MOVD R10, R2
+	SUB  R7, R2, R2
+	MOVD R13, R3
+	SUB  R6, R3, R3
+
+	// !!! Try a faster technique for short (16 or fewer bytes) copies.
+	//
+	// if length > 16 || len(dst)-d < 16 || len(src)-s < 16 {
+	//   goto callMemmove // Fall back on calling runtime·memmove.
+	// }
+	//
+	// The C++ snappy code calls this TryFastAppend. It also checks len(src)-s
+	// against 21 instead of 16, because it cannot assume that all of its input
+	// is contiguous in memory and so it needs to leave enough source bytes to
+	// read the next tag without refilling buffers, but Go's Decode assumes
+	// contiguousness (the src argument is a []byte).
+	CMP $16, R4
+	BGT callMemmove
+	CMP $16, R2
+	BLT callMemmove
+	CMP $16, R3
+	BLT callMemmove
+
+	// !!! Implement the copy from src to dst as a 16-byte load and store.
+	// (Decode's documentation says that dst and src must not overlap.)
+	//
+	// This always copies 16 bytes, instead of only length bytes, but that's
+	// OK. If the input is a valid Snappy encoding then subsequent iterations
+	// will fix up the overrun. Otherwise, Decode returns a nil []byte (and a
+	// non-nil error), so the overrun will be ignored.
+	//
+	// Note that on arm64, it is legal and cheap to issue unaligned 8-byte or
+	// 16-byte loads and stores. This technique probably wouldn't be as
+	// effective on architectures that are fussier about alignment.
+	LDP 0(R6), (R14, R15)
+	STP (R14, R15), 0(R7)
+
+	// d += length
+	// s += length
+	ADD R4, R7, R7
+	ADD R4, R6, R6
+	B   loop
+
+callMemmove:
+	// if length > len(dst)-d || length > len(src)-s { etc }
+	CMP R2, R4
+	BGT errCorrupt
+	CMP R3, R4
+	BGT errCorrupt
+
+	// copy(dst[d:], src[s:s+length])
+	//
+	// This means calling runtime·memmove(&dst[d], &src[s], length), so we push
+	// R7, R6 and R4 as arguments. Coincidentally, we also need to spill those
+	// three registers to the stack, to save local variables across the CALL.
+	MOVD R7, 8(RSP)
+	MOVD R6, 16(RSP)
+	MOVD R4, 24(RSP)
+	MOVD R7, 32(RSP)
+	MOVD R6, 40(RSP)
+	MOVD R4, 48(RSP)
+	CALL runtime·memmove(SB)
+
+	// Restore local variables: unspill registers from the stack and
+	// re-calculate R8-R13.
+	MOVD 32(RSP), R7
+	MOVD 40(RSP), R6
+	MOVD 48(RSP), R4
+	MOVD dst_base+0(FP), R8
+	MOVD dst_len+8(FP), R9
+	MOVD R8, R10
+	ADD  R9, R10, R10
+	MOVD src_base+24(FP), R11
+	MOVD src_len+32(FP), R12
+	MOVD R11, R13
+	ADD  R12, R13, R13
+
+	// d += length
+	// s += length
+	ADD R4, R7, R7
+	ADD R4, R6, R6
+	B   loop
+
+tagLit60Plus:
+	// !!! This fragment does the
+	//
+	// s += x - 58; if uint(s) > uint(len(src)) { etc }
+	//
+	// checks. In the asm version, we code it once instead of once per switch case.
+	ADD  R4, R6, R6
+	SUB  $58, R6, R6
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// case x == 60:
+	MOVW $61, R1
+	CMPW R1, R4
+	BEQ  tagLit61
+	BGT  tagLit62Plus
+
+	// x = uint32(src[s-1])
+	MOVBU -1(R6), R4
+	B     doLit
+
+tagLit61:
+	// case x == 61:
+	// x = uint32(src[s-2]) | uint32(src[s-1])<<8
+	MOVHU -2(R6), R4
+	B     doLit
+
+tagLit62Plus:
+	CMPW $62, R4
+	BHI  tagLit63
+
+	// case x == 62:
+	// x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16
+	MOVHU -3(R6), R4
+	MOVBU -1(R6), R3
+	ORR   R3<<16, R4
+	B     doLit
+
+tagLit63:
+	// case x == 63:
+	// x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24
+	MOVWU -4(R6), R4
+	B     doLit
+
+	// The code above handles literal tags.
+	// ----------------------------------------
+	// The code below handles copy tags.
+
+tagCopy4:
+	// case tagCopy4:
+	// s += 5
+	ADD $5, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// length = 1 + int(src[s-5])>>2
+	MOVD $1, R1
+	ADD  R4>>2, R1, R4
+
+	// offset = int(uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24)
+	MOVWU -4(R6), R5
+	B     doCopy
+
+tagCopy2:
+	// case tagCopy2:
+	// s += 3
+	ADD $3, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// length = 1 + int(src[s-3])>>2
+	MOVD $1, R1
+	ADD  R4>>2, R1, R4
+
+	// offset = int(uint32(src[s-2]) | uint32(src[s-1])<<8)
+	MOVHU -2(R6), R5
+	B     doCopy
+
+tagCopy:
+	// We have a copy tag. We assume that:
+	//	- R3 == src[s] & 0x03
+	//	- R4 == src[s]
+	CMP $2, R3
+	BEQ tagCopy2
+	BGT tagCopy4
+
+	// case tagCopy1:
+	// s += 2
+	ADD $2, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// offset = int(uint32(src[s-2])&0xe0<<3 | uint32(src[s-1]))
+	MOVD  R4, R5
+	AND   $0xe0, R5
+	MOVBU -1(R6), R3
+	ORR   R5<<3, R3, R5
+
+	// length = 4 + int(src[s-2])>>2&0x7
+	MOVD $7, R1
+	AND  R4>>2, R1, R4
+	ADD  $4, R4, R4
+
+doCopy:
+	// This is the end of the outer "switch", when we have a copy tag.
+	//
+	// We assume that:
+	//	- R4 == length && R4 > 0
+	//	- R5 == offset
+
+	// if offset <= 0 { etc }
+	MOVD $0, R1
+	CMP  R1, R5
+	BLE  errCorrupt
+
+	// if d < offset { etc }
+	MOVD R7, R3
+	SUB  R8, R3, R3
+	CMP  R5, R3
+	BLT  errCorrupt
+
+	// if length > len(dst)-d { etc }
+	MOVD R10, R3
+	SUB  R7, R3, R3
+	CMP  R3, R4
+	BGT  errCorrupt
+
+	// forwardCopy(dst[d:d+length], dst[d-offset:]); d += length
+	//
+	// Set:
+	//	- R14 = len(dst)-d
+	//	- R15 = &dst[d-offset]
+	MOVD R10, R14
+	SUB  R7, R14, R14
+	MOVD R7, R15
+	SUB  R5, R15, R15
+
+	// !!! Try a faster technique for short (16 or fewer bytes) forward copies.
+	//
+	// First, try using two 8-byte load/stores, similar to the doLit technique
+	// above. Even if dst[d:d+length] and dst[d-offset:] can overlap, this is
+	// still OK if offset >= 8. Note that this has to be two 8-byte load/stores
+	// and not one 16-byte load/store, and the first store has to be before the
+	// second load, due to the overlap if offset is in the range [8, 16).
+	//
+	// if length > 16 || offset < 8 || len(dst)-d < 16 {
+	//   goto slowForwardCopy
+	// }
+	// copy 16 bytes
+	// d += length
+	CMP  $16, R4
+	BGT  slowForwardCopy
+	CMP  $8, R5
+	BLT  slowForwardCopy
+	CMP  $16, R14
+	BLT  slowForwardCopy
+	MOVD 0(R15), R2
+	MOVD R2, 0(R7)
+	MOVD 8(R15), R3
+	MOVD R3, 8(R7)
+	ADD  R4, R7, R7
+	B    loop
+
+slowForwardCopy:
+	// !!! If the forward copy is longer than 16 bytes, or if offset < 8, we
+	// can still try 8-byte load stores, provided we can overrun up to 10 extra
+	// bytes. As above, the overrun will be fixed up by subsequent iterations
+	// of the outermost loop.
+	//
+	// The C++ snappy code calls this technique IncrementalCopyFastPath. Its
+	// commentary says:
+	//
+	// ----
+	//
+	// The main part of this loop is a simple copy of eight bytes at a time
+	// until we've copied (at least) the requested amount of bytes.  However,
+	// if d and d-offset are less than eight bytes apart (indicating a
+	// repeating pattern of length < 8), we first need to expand the pattern in
+	// order to get the correct results. For instance, if the buffer looks like
+	// this, with the eight-byte <d-offset> and <d> patterns marked as
+	// intervals:
+	//
+	//    abxxxxxxxxxxxx
+	//    [------]           d-offset
+	//      [------]         d
+	//
+	// a single eight-byte copy from <d-offset> to <d> will repeat the pattern
+	// once, after which we can move <d> two bytes without moving <d-offset>:
+	//
+	//    ababxxxxxxxxxx
+	//    [------]           d-offset
+	//        [------]       d
+	//
+	// and repeat the exercise until the two no longer overlap.
+	//
+	// This allows us to do very well in the special case of one single byte
+	// repeated many times, without taking a big hit for more general cases.
+	//
+	// The worst case of extra writing past the end of the match occurs when
+	// offset == 1 and length == 1; the last copy will read from byte positions
+	// [0..7] and write to [4..11], whereas it was only supposed to write to
+	// position 1. Thus, ten excess bytes.
+	//
+	// ----
+	//
+	// That "10 byte overrun" worst case is confirmed by Go's
+	// TestSlowForwardCopyOverrun, which also tests the fixUpSlowForwardCopy
+	// and finishSlowForwardCopy algorithm.
+	//
+	// if length > len(dst)-d-10 {
+	//   goto verySlowForwardCopy
+	// }
+	SUB $10, R14, R14
+	CMP R14, R4
+	BGT verySlowForwardCopy
+
+makeOffsetAtLeast8:
+	// !!! As above, expand the pattern so that offset >= 8 and we can use
+	// 8-byte load/stores.
+	//
+	// for offset < 8 {
+	//   copy 8 bytes from dst[d-offset:] to dst[d:]
+	//   length -= offset
+	//   d      += offset
+	//   offset += offset
+	//   // The two previous lines together means that d-offset, and therefore
+	//   // R15, is unchanged.
+	// }
+	CMP  $8, R5
+	BGE  fixUpSlowForwardCopy
+	MOVD (R15), R3
+	MOVD R3, (R7)
+	SUB  R5, R4, R4
+	ADD  R5, R7, R7
+	ADD  R5, R5, R5
+	B    makeOffsetAtLeast8
+
+fixUpSlowForwardCopy:
+	// !!! Add length (which might be negative now) to d (implied by R7 being
+	// &dst[d]) so that d ends up at the right place when we jump back to the
+	// top of the loop. Before we do that, though, we save R7 to R2 so that, if
+	// length is positive, copying the remaining length bytes will write to the
+	// right place.
+	MOVD R7, R2
+	ADD  R4, R7, R7
+
+finishSlowForwardCopy:
+	// !!! Repeat 8-byte load/stores until length <= 0. Ending with a negative
+	// length means that we overrun, but as above, that will be fixed up by
+	// subsequent iterations of the outermost loop.
+	MOVD $0, R1
+	CMP  R1, R4
+	BLE  loop
+	MOVD (R15), R3
+	MOVD R3, (R2)
+	ADD  $8, R15, R15
+	ADD  $8, R2, R2
+	SUB  $8, R4, R4
+	B    finishSlowForwardCopy
+
+verySlowForwardCopy:
+	// verySlowForwardCopy is a simple implementation of forward copy. In C
+	// parlance, this is a do/while loop instead of a while loop, since we know
+	// that length > 0. In Go syntax:
+	//
+	// for {
+	//   dst[d] = dst[d - offset]
+	//   d++
+	//   length--
+	//   if length == 0 {
+	//     break
+	//   }
+	// }
+	MOVB (R15), R3
+	MOVB R3, (R7)
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	SUB  $1, R4, R4
+	CBNZ R4, verySlowForwardCopy
+	B    loop
+
+	// The code above handles copy tags.
+	// ----------------------------------------
+
+end:
+	// This is the end of the "for s < len(src)".
+	//
+	// if d != len(dst) { etc }
+	CMP R10, R7
+	BNE errCorrupt
+
+	// return 0
+	MOVD $0, ret+48(FP)
+	RET
+
+errCorrupt:
+	// return decodeErrCodeCorrupt
+	MOVD $1, R2
+	MOVD R2, ret+48(FP)
+	RET
diff --git a/vendor/github.com/golang/snappy/decode_amd64.go b/vendor/github.com/golang/snappy/decode_asm.go
similarity index 93%
rename from vendor/github.com/golang/snappy/decode_amd64.go
rename to vendor/github.com/golang/snappy/decode_asm.go
index fcd192b..7082b34 100644
--- a/vendor/github.com/golang/snappy/decode_amd64.go
+++ b/vendor/github.com/golang/snappy/decode_asm.go
@@ -5,6 +5,7 @@
 // +build !appengine
 // +build gc
 // +build !noasm
+// +build amd64 arm64
 
 package snappy
 
diff --git a/vendor/github.com/golang/snappy/decode_other.go b/vendor/github.com/golang/snappy/decode_other.go
index 8c9f204..2f672be 100644
--- a/vendor/github.com/golang/snappy/decode_other.go
+++ b/vendor/github.com/golang/snappy/decode_other.go
@@ -2,7 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-// +build !amd64 appengine !gc noasm
+// +build !amd64,!arm64 appengine !gc noasm
 
 package snappy
 
@@ -85,14 +85,28 @@
 		if offset <= 0 || d < offset || length > len(dst)-d {
 			return decodeErrCodeCorrupt
 		}
-		// Copy from an earlier sub-slice of dst to a later sub-slice. Unlike
-		// the built-in copy function, this byte-by-byte copy always runs
+		// Copy from an earlier sub-slice of dst to a later sub-slice.
+		// If no overlap, use the built-in copy:
+		if offset >= length {
+			copy(dst[d:d+length], dst[d-offset:])
+			d += length
+			continue
+		}
+
+		// Unlike the built-in copy function, this byte-by-byte copy always runs
 		// forwards, even if the slices overlap. Conceptually, this is:
 		//
 		// d += forwardCopy(dst[d:d+length], dst[d-offset:])
-		for end := d + length; d != end; d++ {
-			dst[d] = dst[d-offset]
+		//
+		// We align the slices into a and b and show the compiler they are the same size.
+		// This allows the loop to run without bounds checks.
+		a := dst[d : d+length]
+		b := dst[d-offset:]
+		b = b[:len(a)]
+		for i := range a {
+			a[i] = b[i]
 		}
+		d += length
 	}
 	if d != len(dst) {
 		return decodeErrCodeCorrupt
diff --git a/vendor/github.com/golang/snappy/encode.go b/vendor/github.com/golang/snappy/encode.go
index 8d393e9..7f23657 100644
--- a/vendor/github.com/golang/snappy/encode.go
+++ b/vendor/github.com/golang/snappy/encode.go
@@ -15,6 +15,8 @@
 // Otherwise, a newly allocated slice will be returned.
 //
 // The dst and src must not overlap. It is valid to pass a nil dst.
+//
+// Encode handles the Snappy block format, not the Snappy stream format.
 func Encode(dst, src []byte) []byte {
 	if n := MaxEncodedLen(len(src)); n < 0 {
 		panic(ErrTooLarge)
@@ -139,6 +141,8 @@
 }
 
 // Writer is an io.Writer that can write Snappy-compressed bytes.
+//
+// Writer handles the Snappy stream format, not the Snappy block format.
 type Writer struct {
 	w   io.Writer
 	err error
diff --git a/vendor/github.com/golang/snappy/encode_arm64.s b/vendor/github.com/golang/snappy/encode_arm64.s
new file mode 100644
index 0000000..f8d54ad
--- /dev/null
+++ b/vendor/github.com/golang/snappy/encode_arm64.s
@@ -0,0 +1,722 @@
+// Copyright 2020 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+
+#include "textflag.h"
+
+// The asm code generally follows the pure Go code in encode_other.go, except
+// where marked with a "!!!".
+
+// ----------------------------------------------------------------------------
+
+// func emitLiteral(dst, lit []byte) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R3	len(lit)
+//	- R4	n
+//	- R6	return value
+//	- R8	&dst[i]
+//	- R10	&lit[0]
+//
+// The 32 bytes of stack space is to call runtime·memmove.
+//
+// The unusual register allocation of local variables, such as R10 for the
+// source pointer, matches the allocation used at the call site in encodeBlock,
+// which makes it easier to manually inline this function.
+TEXT ·emitLiteral(SB), NOSPLIT, $32-56
+	MOVD dst_base+0(FP), R8
+	MOVD lit_base+24(FP), R10
+	MOVD lit_len+32(FP), R3
+	MOVD R3, R6
+	MOVW R3, R4
+	SUBW $1, R4, R4
+
+	CMPW $60, R4
+	BLT  oneByte
+	CMPW $256, R4
+	BLT  twoBytes
+
+threeBytes:
+	MOVD $0xf4, R2
+	MOVB R2, 0(R8)
+	MOVW R4, 1(R8)
+	ADD  $3, R8, R8
+	ADD  $3, R6, R6
+	B    memmove
+
+twoBytes:
+	MOVD $0xf0, R2
+	MOVB R2, 0(R8)
+	MOVB R4, 1(R8)
+	ADD  $2, R8, R8
+	ADD  $2, R6, R6
+	B    memmove
+
+oneByte:
+	LSLW $2, R4, R4
+	MOVB R4, 0(R8)
+	ADD  $1, R8, R8
+	ADD  $1, R6, R6
+
+memmove:
+	MOVD R6, ret+48(FP)
+
+	// copy(dst[i:], lit)
+	//
+	// This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push
+	// R8, R10 and R3 as arguments.
+	MOVD R8, 8(RSP)
+	MOVD R10, 16(RSP)
+	MOVD R3, 24(RSP)
+	CALL runtime·memmove(SB)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func emitCopy(dst []byte, offset, length int) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R3	length
+//	- R7	&dst[0]
+//	- R8	&dst[i]
+//	- R11	offset
+//
+// The unusual register allocation of local variables, such as R11 for the
+// offset, matches the allocation used at the call site in encodeBlock, which
+// makes it easier to manually inline this function.
+TEXT ·emitCopy(SB), NOSPLIT, $0-48
+	MOVD dst_base+0(FP), R8
+	MOVD R8, R7
+	MOVD offset+24(FP), R11
+	MOVD length+32(FP), R3
+
+loop0:
+	// for length >= 68 { etc }
+	CMPW $68, R3
+	BLT  step1
+
+	// Emit a length 64 copy, encoded as 3 bytes.
+	MOVD $0xfe, R2
+	MOVB R2, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUB  $64, R3, R3
+	B    loop0
+
+step1:
+	// if length > 64 { etc }
+	CMP $64, R3
+	BLE step2
+
+	// Emit a length 60 copy, encoded as 3 bytes.
+	MOVD $0xee, R2
+	MOVB R2, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUB  $60, R3, R3
+
+step2:
+	// if length >= 12 || offset >= 2048 { goto step3 }
+	CMP  $12, R3
+	BGE  step3
+	CMPW $2048, R11
+	BGE  step3
+
+	// Emit the remaining copy, encoded as 2 bytes.
+	MOVB R11, 1(R8)
+	LSRW $3, R11, R11
+	AND  $0xe0, R11, R11
+	SUB  $4, R3, R3
+	LSLW $2, R3
+	AND  $0xff, R3, R3
+	ORRW R3, R11, R11
+	ORRW $1, R11, R11
+	MOVB R11, 0(R8)
+	ADD  $2, R8, R8
+
+	// Return the number of bytes written.
+	SUB  R7, R8, R8
+	MOVD R8, ret+40(FP)
+	RET
+
+step3:
+	// Emit the remaining copy, encoded as 3 bytes.
+	SUB  $1, R3, R3
+	AND  $0xff, R3, R3
+	LSLW $2, R3, R3
+	ORRW $2, R3, R3
+	MOVB R3, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+
+	// Return the number of bytes written.
+	SUB  R7, R8, R8
+	MOVD R8, ret+40(FP)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func extendMatch(src []byte, i, j int) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R6	&src[0]
+//	- R7	&src[j]
+//	- R13	&src[len(src) - 8]
+//	- R14	&src[len(src)]
+//	- R15	&src[i]
+//
+// The unusual register allocation of local variables, such as R15 for a source
+// pointer, matches the allocation used at the call site in encodeBlock, which
+// makes it easier to manually inline this function.
+TEXT ·extendMatch(SB), NOSPLIT, $0-48
+	MOVD src_base+0(FP), R6
+	MOVD src_len+8(FP), R14
+	MOVD i+24(FP), R15
+	MOVD j+32(FP), R7
+	ADD  R6, R14, R14
+	ADD  R6, R15, R15
+	ADD  R6, R7, R7
+	MOVD R14, R13
+	SUB  $8, R13, R13
+
+cmp8:
+	// As long as we are 8 or more bytes before the end of src, we can load and
+	// compare 8 bytes at a time. If those 8 bytes are equal, repeat.
+	CMP  R13, R7
+	BHI  cmp1
+	MOVD (R15), R3
+	MOVD (R7), R4
+	CMP  R4, R3
+	BNE  bsf
+	ADD  $8, R15, R15
+	ADD  $8, R7, R7
+	B    cmp8
+
+bsf:
+	// If those 8 bytes were not equal, XOR the two 8 byte values, and return
+	// the index of the first byte that differs.
+	// RBIT reverses the bit order, then CLZ counts the leading zeros, the
+	// combination of which finds the least significant bit which is set.
+	// The arm64 architecture is little-endian, and the shift by 3 converts
+	// a bit index to a byte index.
+	EOR  R3, R4, R4
+	RBIT R4, R4
+	CLZ  R4, R4
+	ADD  R4>>3, R7, R7
+
+	// Convert from &src[ret] to ret.
+	SUB  R6, R7, R7
+	MOVD R7, ret+40(FP)
+	RET
+
+cmp1:
+	// In src's tail, compare 1 byte at a time.
+	CMP  R7, R14
+	BLS  extendMatchEnd
+	MOVB (R15), R3
+	MOVB (R7), R4
+	CMP  R4, R3
+	BNE  extendMatchEnd
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	B    cmp1
+
+extendMatchEnd:
+	// Convert from &src[ret] to ret.
+	SUB  R6, R7, R7
+	MOVD R7, ret+40(FP)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func encodeBlock(dst, src []byte) (d int)
+//
+// All local variables fit into registers, other than "var table". The register
+// allocation:
+//	- R3	.	.
+//	- R4	.	.
+//	- R5	64	shift
+//	- R6	72	&src[0], tableSize
+//	- R7	80	&src[s]
+//	- R8	88	&dst[d]
+//	- R9	96	sLimit
+//	- R10	.	&src[nextEmit]
+//	- R11	104	prevHash, currHash, nextHash, offset
+//	- R12	112	&src[base], skip
+//	- R13	.	&src[nextS], &src[len(src) - 8]
+//	- R14	.	len(src), bytesBetweenHashLookups, &src[len(src)], x
+//	- R15	120	candidate
+//	- R16	.	hash constant, 0x1e35a7bd
+//	- R17	.	&table
+//	- .  	128	table
+//
+// The second column (64, 72, etc) is the stack offset to spill the registers
+// when calling other functions. We could pack this slightly tighter, but it's
+// simpler to have a dedicated spill map independent of the function called.
+//
+// "var table [maxTableSize]uint16" takes up 32768 bytes of stack space. An
+// extra 64 bytes, to call other functions, and an extra 64 bytes, to spill
+// local variables (registers) during calls gives 32768 + 64 + 64 = 32896.
+TEXT ·encodeBlock(SB), 0, $32896-56
+	MOVD dst_base+0(FP), R8
+	MOVD src_base+24(FP), R7
+	MOVD src_len+32(FP), R14
+
+	// shift, tableSize := uint32(32-8), 1<<8
+	MOVD  $24, R5
+	MOVD  $256, R6
+	MOVW  $0xa7bd, R16
+	MOVKW $(0x1e35<<16), R16
+
+calcShift:
+	// for ; tableSize < maxTableSize && tableSize < len(src); tableSize *= 2 {
+	//	shift--
+	// }
+	MOVD $16384, R2
+	CMP  R2, R6
+	BGE  varTable
+	CMP  R14, R6
+	BGE  varTable
+	SUB  $1, R5, R5
+	LSL  $1, R6, R6
+	B    calcShift
+
+varTable:
+	// var table [maxTableSize]uint16
+	//
+	// In the asm code, unlike the Go code, we can zero-initialize only the
+	// first tableSize elements. Each uint16 element is 2 bytes and each
+	// iterations writes 64 bytes, so we can do only tableSize/32 writes
+	// instead of the 2048 writes that would zero-initialize all of table's
+	// 32768 bytes. This clear could overrun the first tableSize elements, but
+	// it won't overrun the allocated stack size.
+	ADD  $128, RSP, R17
+	MOVD R17, R4
+
+	// !!! R6 = &src[tableSize]
+	ADD R6<<1, R17, R6
+
+memclr:
+	STP.P (ZR, ZR), 64(R4)
+	STP   (ZR, ZR), -48(R4)
+	STP   (ZR, ZR), -32(R4)
+	STP   (ZR, ZR), -16(R4)
+	CMP   R4, R6
+	BHI   memclr
+
+	// !!! R6 = &src[0]
+	MOVD R7, R6
+
+	// sLimit := len(src) - inputMargin
+	MOVD R14, R9
+	SUB  $15, R9, R9
+
+	// !!! Pre-emptively spill R5, R6 and R9 to the stack. Their values don't
+	// change for the rest of the function.
+	MOVD R5, 64(RSP)
+	MOVD R6, 72(RSP)
+	MOVD R9, 96(RSP)
+
+	// nextEmit := 0
+	MOVD R6, R10
+
+	// s := 1
+	ADD $1, R7, R7
+
+	// nextHash := hash(load32(src, s), shift)
+	MOVW 0(R7), R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+outer:
+	// for { etc }
+
+	// skip := 32
+	MOVD $32, R12
+
+	// nextS := s
+	MOVD R7, R13
+
+	// candidate := 0
+	MOVD $0, R15
+
+inner0:
+	// for { etc }
+
+	// s := nextS
+	MOVD R13, R7
+
+	// bytesBetweenHashLookups := skip >> 5
+	MOVD R12, R14
+	LSR  $5, R14, R14
+
+	// nextS = s + bytesBetweenHashLookups
+	ADD R14, R13, R13
+
+	// skip += bytesBetweenHashLookups
+	ADD R14, R12, R12
+
+	// if nextS > sLimit { goto emitRemainder }
+	MOVD R13, R3
+	SUB  R6, R3, R3
+	CMP  R9, R3
+	BHI  emitRemainder
+
+	// candidate = int(table[nextHash])
+	MOVHU 0(R17)(R11<<1), R15
+
+	// table[nextHash] = uint16(s)
+	MOVD R7, R3
+	SUB  R6, R3, R3
+
+	MOVH R3, 0(R17)(R11<<1)
+
+	// nextHash = hash(load32(src, nextS), shift)
+	MOVW 0(R13), R11
+	MULW R16, R11
+	LSRW R5, R11, R11
+
+	// if load32(src, s) != load32(src, candidate) { continue } break
+	MOVW 0(R7), R3
+	MOVW (R6)(R15), R4
+	CMPW R4, R3
+	BNE  inner0
+
+fourByteMatch:
+	// As per the encode_other.go code:
+	//
+	// A 4-byte match has been found. We'll later see etc.
+
+	// !!! Jump to a fast path for short (<= 16 byte) literals. See the comment
+	// on inputMargin in encode.go.
+	MOVD R7, R3
+	SUB  R10, R3, R3
+	CMP  $16, R3
+	BLE  emitLiteralFastPath
+
+	// ----------------------------------------
+	// Begin inline of the emitLiteral call.
+	//
+	// d += emitLiteral(dst[d:], src[nextEmit:s])
+
+	MOVW R3, R4
+	SUBW $1, R4, R4
+
+	MOVW $60, R2
+	CMPW R2, R4
+	BLT  inlineEmitLiteralOneByte
+	MOVW $256, R2
+	CMPW R2, R4
+	BLT  inlineEmitLiteralTwoBytes
+
+inlineEmitLiteralThreeBytes:
+	MOVD $0xf4, R1
+	MOVB R1, 0(R8)
+	MOVW R4, 1(R8)
+	ADD  $3, R8, R8
+	B    inlineEmitLiteralMemmove
+
+inlineEmitLiteralTwoBytes:
+	MOVD $0xf0, R1
+	MOVB R1, 0(R8)
+	MOVB R4, 1(R8)
+	ADD  $2, R8, R8
+	B    inlineEmitLiteralMemmove
+
+inlineEmitLiteralOneByte:
+	LSLW $2, R4, R4
+	MOVB R4, 0(R8)
+	ADD  $1, R8, R8
+
+inlineEmitLiteralMemmove:
+	// Spill local variables (registers) onto the stack; call; unspill.
+	//
+	// copy(dst[i:], lit)
+	//
+	// This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push
+	// R8, R10 and R3 as arguments.
+	MOVD R8, 8(RSP)
+	MOVD R10, 16(RSP)
+	MOVD R3, 24(RSP)
+
+	// Finish the "d +=" part of "d += emitLiteral(etc)".
+	ADD   R3, R8, R8
+	MOVD  R7, 80(RSP)
+	MOVD  R8, 88(RSP)
+	MOVD  R15, 120(RSP)
+	CALL  runtime·memmove(SB)
+	MOVD  64(RSP), R5
+	MOVD  72(RSP), R6
+	MOVD  80(RSP), R7
+	MOVD  88(RSP), R8
+	MOVD  96(RSP), R9
+	MOVD  120(RSP), R15
+	ADD   $128, RSP, R17
+	MOVW  $0xa7bd, R16
+	MOVKW $(0x1e35<<16), R16
+	B     inner1
+
+inlineEmitLiteralEnd:
+	// End inline of the emitLiteral call.
+	// ----------------------------------------
+
+emitLiteralFastPath:
+	// !!! Emit the 1-byte encoding "uint8(len(lit)-1)<<2".
+	MOVB R3, R4
+	SUBW $1, R4, R4
+	AND  $0xff, R4, R4
+	LSLW $2, R4, R4
+	MOVB R4, (R8)
+	ADD  $1, R8, R8
+
+	// !!! Implement the copy from lit to dst as a 16-byte load and store.
+	// (Encode's documentation says that dst and src must not overlap.)
+	//
+	// This always copies 16 bytes, instead of only len(lit) bytes, but that's
+	// OK. Subsequent iterations will fix up the overrun.
+	//
+	// Note that on arm64, it is legal and cheap to issue unaligned 8-byte or
+	// 16-byte loads and stores. This technique probably wouldn't be as
+	// effective on architectures that are fussier about alignment.
+	LDP 0(R10), (R0, R1)
+	STP (R0, R1), 0(R8)
+	ADD R3, R8, R8
+
+inner1:
+	// for { etc }
+
+	// base := s
+	MOVD R7, R12
+
+	// !!! offset := base - candidate
+	MOVD R12, R11
+	SUB  R15, R11, R11
+	SUB  R6, R11, R11
+
+	// ----------------------------------------
+	// Begin inline of the extendMatch call.
+	//
+	// s = extendMatch(src, candidate+4, s+4)
+
+	// !!! R14 = &src[len(src)]
+	MOVD src_len+32(FP), R14
+	ADD  R6, R14, R14
+
+	// !!! R13 = &src[len(src) - 8]
+	MOVD R14, R13
+	SUB  $8, R13, R13
+
+	// !!! R15 = &src[candidate + 4]
+	ADD $4, R15, R15
+	ADD R6, R15, R15
+
+	// !!! s += 4
+	ADD $4, R7, R7
+
+inlineExtendMatchCmp8:
+	// As long as we are 8 or more bytes before the end of src, we can load and
+	// compare 8 bytes at a time. If those 8 bytes are equal, repeat.
+	CMP  R13, R7
+	BHI  inlineExtendMatchCmp1
+	MOVD (R15), R3
+	MOVD (R7), R4
+	CMP  R4, R3
+	BNE  inlineExtendMatchBSF
+	ADD  $8, R15, R15
+	ADD  $8, R7, R7
+	B    inlineExtendMatchCmp8
+
+inlineExtendMatchBSF:
+	// If those 8 bytes were not equal, XOR the two 8 byte values, and return
+	// the index of the first byte that differs.
+	// RBIT reverses the bit order, then CLZ counts the leading zeros, the
+	// combination of which finds the least significant bit which is set.
+	// The arm64 architecture is little-endian, and the shift by 3 converts
+	// a bit index to a byte index.
+	EOR  R3, R4, R4
+	RBIT R4, R4
+	CLZ  R4, R4
+	ADD  R4>>3, R7, R7
+	B    inlineExtendMatchEnd
+
+inlineExtendMatchCmp1:
+	// In src's tail, compare 1 byte at a time.
+	CMP  R7, R14
+	BLS  inlineExtendMatchEnd
+	MOVB (R15), R3
+	MOVB (R7), R4
+	CMP  R4, R3
+	BNE  inlineExtendMatchEnd
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	B    inlineExtendMatchCmp1
+
+inlineExtendMatchEnd:
+	// End inline of the extendMatch call.
+	// ----------------------------------------
+
+	// ----------------------------------------
+	// Begin inline of the emitCopy call.
+	//
+	// d += emitCopy(dst[d:], base-candidate, s-base)
+
+	// !!! length := s - base
+	MOVD R7, R3
+	SUB  R12, R3, R3
+
+inlineEmitCopyLoop0:
+	// for length >= 68 { etc }
+	MOVW $68, R2
+	CMPW R2, R3
+	BLT  inlineEmitCopyStep1
+
+	// Emit a length 64 copy, encoded as 3 bytes.
+	MOVD $0xfe, R1
+	MOVB R1, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUBW $64, R3, R3
+	B    inlineEmitCopyLoop0
+
+inlineEmitCopyStep1:
+	// if length > 64 { etc }
+	MOVW $64, R2
+	CMPW R2, R3
+	BLE  inlineEmitCopyStep2
+
+	// Emit a length 60 copy, encoded as 3 bytes.
+	MOVD $0xee, R1
+	MOVB R1, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUBW $60, R3, R3
+
+inlineEmitCopyStep2:
+	// if length >= 12 || offset >= 2048 { goto inlineEmitCopyStep3 }
+	MOVW $12, R2
+	CMPW R2, R3
+	BGE  inlineEmitCopyStep3
+	MOVW $2048, R2
+	CMPW R2, R11
+	BGE  inlineEmitCopyStep3
+
+	// Emit the remaining copy, encoded as 2 bytes.
+	MOVB R11, 1(R8)
+	LSRW $8, R11, R11
+	LSLW $5, R11, R11
+	SUBW $4, R3, R3
+	AND  $0xff, R3, R3
+	LSLW $2, R3, R3
+	ORRW R3, R11, R11
+	ORRW $1, R11, R11
+	MOVB R11, 0(R8)
+	ADD  $2, R8, R8
+	B    inlineEmitCopyEnd
+
+inlineEmitCopyStep3:
+	// Emit the remaining copy, encoded as 3 bytes.
+	SUBW $1, R3, R3
+	LSLW $2, R3, R3
+	ORRW $2, R3, R3
+	MOVB R3, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+
+inlineEmitCopyEnd:
+	// End inline of the emitCopy call.
+	// ----------------------------------------
+
+	// nextEmit = s
+	MOVD R7, R10
+
+	// if s >= sLimit { goto emitRemainder }
+	MOVD R7, R3
+	SUB  R6, R3, R3
+	CMP  R3, R9
+	BLS  emitRemainder
+
+	// As per the encode_other.go code:
+	//
+	// We could immediately etc.
+
+	// x := load64(src, s-1)
+	MOVD -1(R7), R14
+
+	// prevHash := hash(uint32(x>>0), shift)
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// table[prevHash] = uint16(s-1)
+	MOVD R7, R3
+	SUB  R6, R3, R3
+	SUB  $1, R3, R3
+
+	MOVHU R3, 0(R17)(R11<<1)
+
+	// currHash := hash(uint32(x>>8), shift)
+	LSR  $8, R14, R14
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// candidate = int(table[currHash])
+	MOVHU 0(R17)(R11<<1), R15
+
+	// table[currHash] = uint16(s)
+	ADD   $1, R3, R3
+	MOVHU R3, 0(R17)(R11<<1)
+
+	// if uint32(x>>8) == load32(src, candidate) { continue }
+	MOVW (R6)(R15), R4
+	CMPW R4, R14
+	BEQ  inner1
+
+	// nextHash = hash(uint32(x>>16), shift)
+	LSR  $8, R14, R14
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// s++
+	ADD $1, R7, R7
+
+	// break out of the inner1 for loop, i.e. continue the outer loop.
+	B outer
+
+emitRemainder:
+	// if nextEmit < len(src) { etc }
+	MOVD src_len+32(FP), R3
+	ADD  R6, R3, R3
+	CMP  R3, R10
+	BEQ  encodeBlockEnd
+
+	// d += emitLiteral(dst[d:], src[nextEmit:])
+	//
+	// Push args.
+	MOVD R8, 8(RSP)
+	MOVD $0, 16(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+	MOVD $0, 24(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+	MOVD R10, 32(RSP)
+	SUB  R10, R3, R3
+	MOVD R3, 40(RSP)
+	MOVD R3, 48(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+
+	// Spill local variables (registers) onto the stack; call; unspill.
+	MOVD R8, 88(RSP)
+	CALL ·emitLiteral(SB)
+	MOVD 88(RSP), R8
+
+	// Finish the "d +=" part of "d += emitLiteral(etc)".
+	MOVD 56(RSP), R1
+	ADD  R1, R8, R8
+
+encodeBlockEnd:
+	MOVD dst_base+0(FP), R3
+	SUB  R3, R8, R8
+	MOVD R8, d+48(FP)
+	RET
diff --git a/vendor/github.com/golang/snappy/encode_amd64.go b/vendor/github.com/golang/snappy/encode_asm.go
similarity index 96%
rename from vendor/github.com/golang/snappy/encode_amd64.go
rename to vendor/github.com/golang/snappy/encode_asm.go
index 150d91b..107c1e7 100644
--- a/vendor/github.com/golang/snappy/encode_amd64.go
+++ b/vendor/github.com/golang/snappy/encode_asm.go
@@ -5,6 +5,7 @@
 // +build !appengine
 // +build gc
 // +build !noasm
+// +build amd64 arm64
 
 package snappy
 
diff --git a/vendor/github.com/golang/snappy/encode_other.go b/vendor/github.com/golang/snappy/encode_other.go
index dbcae90..296d7f0 100644
--- a/vendor/github.com/golang/snappy/encode_other.go
+++ b/vendor/github.com/golang/snappy/encode_other.go
@@ -2,7 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-// +build !amd64 appengine !gc noasm
+// +build !amd64,!arm64 appengine !gc noasm
 
 package snappy