diff --git a/.gitignore b/.gitignore
index 3f497b2..db581da 100644
--- a/.gitignore
+++ b/.gitignore
@@ -6,3 +6,6 @@
 install.log
 *.swp
 *.log
+logger/*
+voltha-debug-dump-minimal*
+voltha-system-tests
diff --git a/minimal-values.yaml b/minimal-values.yaml
index 7d439d3..62e6038 100644
--- a/minimal-values.yaml
+++ b/minimal-values.yaml
@@ -46,21 +46,21 @@
 #  adapter_open_onu:
 #    repository: voltha/voltha-openonu-adapter
 #    tag: 2.1.0
-#  adapter_simulated_olt:
-#    repository: voltha/voltha-adapter-simulated-olt
-#    tag: 2.1.1
-#  adapter_simulated_onu:
-#    repository: voltha/voltha-adapter-simulated-onu
-#    tag: 2.1.1
+  adapter_simulated_olt:
+    repository: voltha/voltha-adapter-simulated-olt
+    tag: master
+  adapter_simulated_onu:
+    repository: voltha/voltha-adapter-simulated-onu
+    tag: master
   bbsim:
     repository: voltha/voltha-bbsim
     tag: voltha-2.1
-#  afrouter:
-#    repository: voltha/voltha-afrouter
-#    tag: 2.1.1
-#  afrouterd:
-#    repository: voltha/voltha-afrouterd
-#    tag: 2.1.1
+  afrouter:
+    repository: voltha/voltha-afrouter
+    tag: master
+  afrouterd:
+    repository: voltha/voltha-afrouterd
+    tag: master
 #  cli:
 #    repository: voltha/voltha-cli
 #    tag: 2.1.1
diff --git a/scripts/e2e-repeat.sh b/scripts/e2e-repeat.sh
new file mode 100755
index 0000000..2cd87b7
--- /dev/null
+++ b/scripts/e2e-repeat.sh
@@ -0,0 +1,151 @@
+#!/bin/bash
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# this script repeatedly invokes the e2e system test on a VOLTHA instance
+
+set -o pipefail
+
+if [ ! -r voltha-system-tests ]; then
+    git clone http://gerrit.opencord.org/voltha-system-tests voltha-system-tests
+fi
+
+delta() {
+    local LEFT=$(echo $1 | numfmt --from=iec)
+    local RIGHT=$(echo $2 | numfmt --from=iec)
+    local V=$(expr $LEFT - $RIGHT)
+    echo ${V#-}
+}
+
+average() {
+    local MIN=0
+    local MAX=0
+    local COUNT=0
+    local SUM=0
+    for V in $*; do
+        COUNT=$(expr $COUNT + 1)
+        SUM=$(expr $SUM + $V)
+        if [ $COUNT -eq 1 ]; then
+            MIN=$V
+            MAX=$V
+        else
+            if [ $V -lt $MIN ]; then
+                MIN=$V
+            elif [ $V -gt $MAX ]; then
+                MAX=$V
+            fi
+        fi
+    done
+    if [ $COUNT -gt 3 ]; then
+        SUM=$(expr $SUM - $MIN - $MAX)
+        COUNT=$(expr $COUNT - 2)
+    fi
+    if [ $COUNT -lt 1 ]; then
+        echo 0
+    else
+        echo $(expr $SUM / $COUNT)
+    fi
+}
+
+export WAIT_FOR_DOWN=y
+export TERM=
+
+COMPLETED=0
+COUNT_OK=0
+COUNT_FAIL=0
+COUNT_SINCE_FAIL=0
+FAILURE_LIST=()
+RSS_DIFFS=()
+KEY_DIFFS=()
+SIZE_DIFFS=()
+LOG=$(mktemp)
+while true; do 
+  RUN_TS=$(date -u +%Y-%m-%dT%H:%M:%SZ)
+  echo "START RUN $RUN @ $RUN_TS" | tee -a $LOG
+  DEPLOY_K8S=y WITH_BBSIM=y ./voltha up
+  # because BBSIM needs time
+  sleep 60
+  ETCD=$(kubectl -n voltha get pods | grep etcd-cluster | awk '{print $1}')
+  BEFORE_KEY_COUNT=$(kubectl -n voltha exec -ti $ETCD \
+      -- sh -c 'ETCDCTL_API=3 etcdctl get --command-timeout=60s --from-key=true --keys-only . | sed -e "/^$/d" | wc -l | tr -d "\r\n"')
+  BEFORE_SIZE=$(numfmt --to=iec \
+            $(kubectl -n voltha exec -ti $ETCD \
+            -- sh -c 'ETCDCTL_API=3 etcdctl endpoint status -w json' | tr -d '\r\n' | jq .[].Status.dbSize))
+  BEFORE_RSS=$(ps -eo rss,pid,cmd | grep /usr/local/bin/etcd | grep -v grep | cut -d\  -f1 | numfmt --to=iec)
+  (cd voltha-system-tests; make sanity-kind 2>&1 | tee $LOG)
+  FAIL=$?
+  AFTER_KEY_COUNT=$(kubectl -n voltha exec -ti $ETCD \
+      -- sh -c 'ETCDCTL_API=3 etcdctl get --command-timeout=60s --from-key=true --keys-only . | sed -e "/^$/d" | wc -l | tr -d "\r\n"')
+  AFTER_SIZE=$(numfmt --to=iec \
+            $(kubectl -n voltha exec -ti $ETCD \
+            -- sh -c 'ETCDCTL_API=3 etcdctl endpoint status -w json' | tr -d '\r\n' | jq .[].Status.dbSize))
+  AFTER_RSS=$(ps -eo rss,pid,cmd | grep /usr/local/bin/etcd | grep -v grep | cut -d\  -f1 | numfmt --to=iec)
+  if [ $FAIL -eq 0 ]; then
+      COUNT_OK=$(expr $COUNT_OK + 1)
+      COUNT_SINCE_FAIL=$(expr $COUNT_SINCE_FAIL + 1)
+      helm delete --purge bbsim
+      while [ $(kubectl get --all-namespaces pods,svc 2>&1 | grep -c bbsim) -gt 0 ]; do
+          sleep 3
+      done
+  else
+      COUNT_FAIL=$(expr $COUNT_FAIL + 1)
+      FAILURE_LIST+=($COUNT_SINCE_FAIL)
+      COUNT_SINCE_FAIL=0
+      DUMP_FROM=$RUN_TS ./voltha dump
+      ./voltha down
+  fi
+  echo "END RUN: $RUN @ $(date -u +%Y-%m-%dT%H:%M:%SZ)" | tee -a $LOG
+  COMPLETED=$(expr $COMPLETED + 1)
+  MTBF=0
+  if [ ${#FAILURE_LIST[@]} -gt 0 ]; then
+      for V in ${FAILURE_LIST[@]}; do
+          MTBF=$(expr $MTBF + $V)
+      done
+      MTBF=$(expr $MTBF \/ ${#FAILURE_LIST[@]})
+  fi
+  
+  RSS_DIFFS+=($(delta $AFTER_RSS $BEFORE_RSS))
+  KEY_DIFFS+=($(delta $AFTER_KEY_COUNT $BEFORE_KEY_COUNT))
+  SIZE_DIFFS+=($(delta $AFTER_SIZE $BEFORE_SIZE))
+
+  echo "{" | tee -a $LOG
+  echo "    NumberOfRuns:  $COMPLETED," | tee -a $LOG
+  echo "    Success:       $COUNT_OK," | tee -a $LOG
+  echo "    Failed:        $COUNT_FAIL," | tee -a $LOG
+  echo "    SinceLastFail: $COUNT_SINCE_FAIL," | tee -a $LOG
+  echo "    MTBF:          $MTBF," | tee -a $LOG
+  echo "    FAILURES:      ${FAILURE_LIST[@]}," | tee -a $LOG
+  echo "    ETCd: {" | tee -a $LOG
+  echo "        KeyCount: {" | tee -a $LOG
+  echo "            Before: $BEFORE_KEY_COUNT," | tee -a $LOG
+  echo "            After:  $AFTER_KEY_COUNT," | tee -a $LOG
+  echo "            Average: $(average ${KEY_DIFFS[@]})," | tee -a $LOG
+  echo "        }," | tee -a $LOG
+  echo "        DbSize: {" | tee -a $LOG
+  echo "            Before: $BEFORE_SIZE," | tee -a $LOG
+  echo "            After: $AFTER_SIZE," | tee -a $LOG
+  echo "            Average: $(numfmt --to=iec $(average ${SIZE_DIFFS[@]}))," | tee -a $LOG
+  echo "        }" | tee -a $LOG
+  echo "        RSS: {" | tee -a $LOG
+  echo "            Before: $BEFORE_RSS," | tee -a $LOG
+  echo "            After: $AFTER_RSS," | tee -a $LOG
+  echo "            Average: $(numfmt --to=iec $(average ${RSS_DIFFS[@]}))," | tee -a $LOG
+  echo "        }" | tee -a $LOG
+  echo "    }" | tee -a $LOG
+  echo "}" | tee -a $LOG
+  if [ $FAIL -ne 0 ]; then
+      mkdir -p failures
+      cp $LOG failures/$(date -u +"%Y%m%dT%H%M%SZ")-fail-output.log
+  fi
+done
diff --git a/scripts/etcd-compact.sh b/scripts/etcd-compact.sh
new file mode 100755
index 0000000..0fe4bf2
--- /dev/null
+++ b/scripts/etcd-compact.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script compats the VOLTHA etcd cluster to the last version
+
+VER=$(kubectl -n voltha exec -ti \
+    $(kubectl -n voltha get pods | grep etcd-cluster | awk '{print $1}') -- \
+    sh -c 'ETCDCTL_API=3 etcdctl endpoint status -w json' | tr -d '\r\n' | jq .[].Status.header.revision)
+kubectl -n voltha exec -ti $(kubectl -n voltha get pods | grep etcd-cluster | awk '{print $1}') -- \
+    sh -c "ETCDCTL_API=3 etcdctl compact $VER"
diff --git a/scripts/etcd-db-size.sh b/scripts/etcd-db-size.sh
new file mode 100755
index 0000000..2c16966
--- /dev/null
+++ b/scripts/etcd-db-size.sh
@@ -0,0 +1,30 @@
+#!/bin/bash
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script calculates the SIZE of the ETCD database
+
+set -o pipefail
+
+ETCD=$(kubectl -n voltha get pods 2>&1 | grep etcd-cluster | awk '{print $1}')
+if [ -z  "$ETCD" ]; then
+    echo "N/A"
+else
+    VALUE=$(kubectl -n voltha exec -ti $ETCD -- sh -c 'ETCDCTL_API=3 etcdctl --command-timeout=10s endpoint status -w json' 2>/dev/null | tr -d '\r\n' | jq .[].Status.dbSize 2>/dev/null)
+    if [ -z "$VALUE" ]; then
+        echo "N/A"
+    else
+        numfmt --to=iec $VALUE
+    fi
+fi
diff --git a/scripts/etcd-defrag.sh b/scripts/etcd-defrag.sh
new file mode 100755
index 0000000..742c302
--- /dev/null
+++ b/scripts/etcd-defrag.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script defragments the ETCD database to claim back space
+
+kubectl -n voltha exec -ti $(kubectl -n voltha get pods | grep etcd-cluster | awk '{print $1}') -- sh -c 'ETCDCTL_API=3 etcdctl defrag'
diff --git a/scripts/log-collector.sh b/scripts/log-collector.sh
new file mode 100755
index 0000000..b99d7d9
--- /dev/null
+++ b/scripts/log-collector.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script periodically collects the POD logs and puts them bin a "RAW"
+# location to be procssed into rolling log files
+
+RAW_LOG_DIR=${RAW_LOG_DIR:-./logger/raw}
+PERIOD=${PERIOOD:-15}
+
+# === END OF CONFIGURATION ===
+set -o pipefail
+
+# Ensure raw log area exists
+mkdir -p $RAW_LOG_DIR
+SINCE=
+
+# forever
+while true; do
+    TS=$(date -u +"%Y-%m-%dT%H:%M:%SZ")
+    SINCE_FLAG=
+    SINCE_MSG=
+
+    # On iteraton 2+ we use the --since-time option to minimize the size of 
+    # the logs collected as well as minimize the overlap with previous
+    # collection iteration
+    if [ ! -z "$SINCE" ]; then
+        SINCE_FLAG="--since-time=$SINCE"
+        SINCE_MSG="since $SINCE "
+    fi
+
+    # Build up the logs in a temp directory and then move that to the 
+    # RAW area when complete
+    WORK=$(mktemp -d)
+
+    # All VOLTHA PODS + ONOS
+    PODS="$(kubectl -n default get pod -o name | grep onos | sed -e 's/^/default:/g') $(kubectl get -n voltha pod -o name | sed -e 's/^/voltha:/g')"
+    if [ $? -ne 0 ]; then
+        echo "Failed to get PODs from Kubernetes, will retry after sleep ..."
+    else
+        echo "Dumping POD logs at $TS $SINCE_MSG..."
+        for POD in $PODS; do
+            NS=$(echo $POD | cut -d: -f1)
+            POD=$(echo $POD | cut -d: -f2 | sed -e 's/^pod\///g')
+            echo "    $POD"
+            kubectl logs --timestamps=true $SINCE_FLAG -n $NS --all-containers $LOG_ARGS $POD 2>&1 > $WORK/$POD.log
+            if [ $? -ne 0 ]; then
+                echo "        ERROR: Encountered while getting POD log, removing failed entry"
+                rm -f $WORK/$POD.log
+            fi
+        done
+        if [ $(ls -1 $WORK/ | wc -l) -eq 0 ]; then
+            # Work directory is empty, no need to move it to raw area, just
+            # remove it
+            rm -rf $WORK
+        else
+            mv $WORK $RAW_LOG_DIR/$TS
+        fi
+    fi
+
+    # End iteration and sleep until next iteration
+    echo "====="
+    SINCE=$TS
+    echo "Sleep for $PERIOD seconds ..."
+    sleep $PERIOD
+done
diff --git a/scripts/log-combine.sh b/scripts/log-combine.sh
new file mode 100755
index 0000000..9f6f54a
--- /dev/null
+++ b/scripts/log-combine.sh
@@ -0,0 +1,128 @@
+#!/bin/sh
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script reads RAW log data collected from the PODS and combines
+# this RAW data into a rolloing log file.
+
+RAW_LOG_DIR=${RAW_LOG_DIR:-./logger/raw}
+COMBINED_LOG_DIR=${COMBINED_LOG_DIR:-./logger/combined}
+ROLL_AT=${ROLL_AT:-100M}
+MAX_LOG_COUNT=${MAX_LOG_COUNT:-5}
+PERIOD=${PERIOD:-60}
+
+# === END OF CONFIGURATION ===
+
+# Convert the ROLL_AT value to byes
+ROLL_AT=$(numfmt --from=iec $ROLL_AT)
+
+# Ensure the combined directory exists
+mkdir -p $COMBINED_LOG_DIR
+
+# Get a working area
+WORK=$(mktemp)
+
+# forever ...
+while true; do
+
+    # Iterate over all existing raw entries
+    for MERGE_DIR in $(ls $RAW_LOG_DIR); do
+        echo "Merging from $RAW_LOG_DIR/$MERGE_DIR ..."
+
+        # Iterate over each file in the RAW data directory
+        for FILE_PATH in $(ls $RAW_LOG_DIR/$MERGE_DIR/*.log); do
+
+            # Get the base of the log file
+            FILE=$(basename $FILE_PATH)
+
+            # Find destination log file with largest index, if none
+            # exists this will end up with IDX == 1
+            IDX=2
+            while [ -f $COMBINED_LOG_DIR/$FILE.$(printf "%04d" $IDX) ]; do
+                IDX=$(expr $IDX + 1)
+            done
+            IDX=$(expr $IDX - 1)
+
+            # Get the NAME of the log file to write
+            NAME=$COMBINED_LOG_DIR/$FILE.$(printf "%04d" $IDX)
+
+            # different behavior if the file exists or not
+            if [ -f $NAME ]; then
+
+                # if the file exists, check the size of the file and see
+                # if we need to move to the next index
+                SIZE=$(stat -c %s $NAME)
+                if [ $SIZE -gt $ROLL_AT ]; then
+
+                    # Combine the exists log file with the new data, this will
+                    # have double entires for the overlap, then run it through
+                    # uniq -D | sort -u  to only end up with the overlap entries
+                    cat $NAME $FILE_PATH | sort | uniq -D | sort -u > $WORK
+
+                    # time to move
+                    IDX=$(expr $IDX + 1)
+
+                    # If the nex IDX is great than the max log file count thebn
+                    # we shift each log file to index - 1, losing the first (.1)
+                    # forever ... 
+                    if [ $IDX -gt $MAX_LOG_COUNT ]; then
+                        echo "    Shifting log files for $FILE ..."
+                        I=1
+                        while [ $I -lt $MAX_LOG_COUNT ]; do
+                            rm -f $COMBINED_LOG_DIR/$FILE.$(printf "%04d" $I)
+                            mv $COMBINED_LOG_DIR/$FILE.$(printf "%04d" $(expr $I + 1)) $COMBINED_LOG_DIR/$FILE.$(printf "%04d" $I)
+                            I=$(expr $I + 1)
+                        done
+
+                        # Reset the IDX to the MAX
+                        IDX=$MAX_LOG_COUNT
+                    fi
+
+                    # 
+                    NAME=$COMBINED_LOG_DIR/$FILE.$(printf "%04d" $IDX)
+                    echo "    Creating new log file $NAME ..."
+
+                    # Combine the list of overlap entries (WORK), i.e. the ones
+                    # that need to be removed from the new data set with the 
+                    # new data set so that there will be 2 of each of the overlaps.
+                    # then pipe that to uniq -u to return only the uniq entries.
+                    # this has the affect of removing the overlap from the new
+                    # data set
+                    cat $WORK $FILE_PATH | sort | uniq -u > $NAME
+                    chmod 644 $NAME
+                else
+                    # Not rolling so a simple combining of the new data set
+                    # with the existing file and sorting to only unique entries
+                    # will do
+                    cat $NAME $FILE_PATH | sort -u > $WORK
+                    rm -f $NAME
+                    mv $WORK $NAME
+                    chmod 644 $NAME
+                fi
+            else
+                # The destination log file does not exist, so just sort the
+                # the RAW data into the file. This really only happens on the
+                # first iteration
+                sort -u $FILE_PATH > $NAME
+                chmod 644 $NAME
+            fi
+        done
+
+        # Remove the RAW data directory so we don't try to merge it again
+        rm -rf $RAW_LOG_DIR/$MERGE_DIR
+    done
+    echo "====="
+    echo "Sleep for $PERIOD seconds ..."
+    sleep $PERIOD
+done
diff --git a/scripts/monitor.sh b/scripts/monitor.sh
new file mode 100755
index 0000000..84a8cae
--- /dev/null
+++ b/scripts/monitor.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script sets up a watch with information that is valuable when
+# developing voltha with k8s
+
+watch '$HOME/kind-voltha/bin/kubectl get --all-namespaces pods,svc && echo "" \
+    &&  kubectl  describe --all-namespaces  pods | grep Image: | grep voltha | sed -e "s/^ *//g" -e "s/: */: /g"  && echo "" \
+    && echo "DB SIZE: $(./scripts/etcd-db-size.sh)" && echo "" \
+    && echo "RSS SIZE: $(ps -eo rss,pid,cmd | grep /usr/local/bin/etcd | grep -v grep | cut -d\  -f1 | numfmt --to=iec)"'
diff --git a/voltha b/voltha
index 7a309fe..dd36731 100755
--- a/voltha
+++ b/voltha
@@ -599,6 +599,10 @@
     espin - $VERIFIED
     bspin - "Dumping VOLTHA POD details"
     PODS="$(kubectl -n default get pod -o name | grep onos | sed -e 's/^/default:/g') $(kubectl get -n voltha pod -o name | sed -e 's/^/voltha:/g')" 
+    SINCE=
+    if [ ! -z "$DUMP_FROM" ]; then
+        SINCE="--since-time=$DUMP_FROM"
+    fi
     for POD in $PODS; do
         NS=$(echo $POD | cut -d: -f1)
         POD=$(echo $POD | cut -d: -f2)
@@ -606,9 +610,9 @@
         mkdir -p $DATA/$POD
         (set -x; kubectl describe -n $NS $POD >> $DATA/$POD/describe.txt 2>&1) >>$LOG 2>&1
         sspin - "Dumping VOLTHA POD details: $POD"
-        (set -x; kubectl logs -n $NS --all-containers --previous $LOG_ARGS $POD >> $DATA/$POD/logs-previous.txt 2>&1) >>$LOG 2>&1
+        (set -x; kubectl logs -n $NS --all-containers $SINCE --previous $LOG_ARGS $POD >> $DATA/$POD/logs-previous.txt 2>&1) >>$LOG 2>&1
         sspin - "Dumping VOLTHA POD details: $POD"
-        (set -x; kubectl logs -n $NS --all-containers $LOG_ARGS $POD >> $DATA/$POD/logs-current.txt 2>&1) >>$LOG 2>&1
+        (set -x; kubectl logs -n $NS --all-containers $SINCE $LOG_ARGS $POD >> $DATA/$POD/logs-current.txt 2>&1) >>$LOG 2>&1
         sspin - "Dumping VOLTHA POD details: $POD"
     done
     espin - "$VERIFIED Dumping VOLTHA POD details$CEOL"