Working service that accepts a POST REST call with params and responds with config-file JSON
Change-Id: I70ac908c92c290d95c6373073184171673d86dc5
Signed-off-by: gunjan5 <gupatel@ciena.com>
diff --git a/config-generator/vendor/github.com/gorilla/context/.travis.yml b/config-generator/vendor/github.com/gorilla/context/.travis.yml
new file mode 100644
index 0000000..24882fc
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/context/.travis.yml
@@ -0,0 +1,18 @@
+language: go
+sudo: false
+
+matrix:
+ include:
+ - go: 1.3
+ - go: 1.4
+ - go: 1.5
+ - go: 1.6
+ - go: tip
+ allow_failures:
+ - go: tip
+
+script:
+ - go get -t -v ./...
+ - diff -u <(echo -n) <(gofmt -d .)
+ - go vet $(go list ./... | grep -v /vendor/)
+ - go test -v -race ./...
diff --git a/config-generator/vendor/github.com/gorilla/context/LICENSE b/config-generator/vendor/github.com/gorilla/context/LICENSE
new file mode 100644
index 0000000..0e5fb87
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/context/LICENSE
@@ -0,0 +1,27 @@
+Copyright (c) 2012 Rodrigo Moraes. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+ * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+ * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/config-generator/vendor/github.com/gorilla/context/README.md b/config-generator/vendor/github.com/gorilla/context/README.md
new file mode 100644
index 0000000..c60a31b
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/context/README.md
@@ -0,0 +1,7 @@
+context
+=======
+[](https://travis-ci.org/gorilla/context)
+
+gorilla/context is a general purpose registry for global request variables.
+
+Read the full documentation here: http://www.gorillatoolkit.org/pkg/context
diff --git a/config-generator/vendor/github.com/gorilla/context/context.go b/config-generator/vendor/github.com/gorilla/context/context.go
new file mode 100644
index 0000000..81cb128
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/context/context.go
@@ -0,0 +1,143 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package context
+
+import (
+ "net/http"
+ "sync"
+ "time"
+)
+
+var (
+ mutex sync.RWMutex
+ data = make(map[*http.Request]map[interface{}]interface{})
+ datat = make(map[*http.Request]int64)
+)
+
+// Set stores a value for a given key in a given request.
+func Set(r *http.Request, key, val interface{}) {
+ mutex.Lock()
+ if data[r] == nil {
+ data[r] = make(map[interface{}]interface{})
+ datat[r] = time.Now().Unix()
+ }
+ data[r][key] = val
+ mutex.Unlock()
+}
+
+// Get returns a value stored for a given key in a given request.
+func Get(r *http.Request, key interface{}) interface{} {
+ mutex.RLock()
+ if ctx := data[r]; ctx != nil {
+ value := ctx[key]
+ mutex.RUnlock()
+ return value
+ }
+ mutex.RUnlock()
+ return nil
+}
+
+// GetOk returns stored value and presence state like multi-value return of map access.
+func GetOk(r *http.Request, key interface{}) (interface{}, bool) {
+ mutex.RLock()
+ if _, ok := data[r]; ok {
+ value, ok := data[r][key]
+ mutex.RUnlock()
+ return value, ok
+ }
+ mutex.RUnlock()
+ return nil, false
+}
+
+// GetAll returns all stored values for the request as a map. Nil is returned for invalid requests.
+func GetAll(r *http.Request) map[interface{}]interface{} {
+ mutex.RLock()
+ if context, ok := data[r]; ok {
+ result := make(map[interface{}]interface{}, len(context))
+ for k, v := range context {
+ result[k] = v
+ }
+ mutex.RUnlock()
+ return result
+ }
+ mutex.RUnlock()
+ return nil
+}
+
+// GetAllOk returns all stored values for the request as a map and a boolean value that indicates if
+// the request was registered.
+func GetAllOk(r *http.Request) (map[interface{}]interface{}, bool) {
+ mutex.RLock()
+ context, ok := data[r]
+ result := make(map[interface{}]interface{}, len(context))
+ for k, v := range context {
+ result[k] = v
+ }
+ mutex.RUnlock()
+ return result, ok
+}
+
+// Delete removes a value stored for a given key in a given request.
+func Delete(r *http.Request, key interface{}) {
+ mutex.Lock()
+ if data[r] != nil {
+ delete(data[r], key)
+ }
+ mutex.Unlock()
+}
+
+// Clear removes all values stored for a given request.
+//
+// This is usually called by a handler wrapper to clean up request
+// variables at the end of a request lifetime. See ClearHandler().
+func Clear(r *http.Request) {
+ mutex.Lock()
+ clear(r)
+ mutex.Unlock()
+}
+
+// clear is Clear without the lock.
+func clear(r *http.Request) {
+ delete(data, r)
+ delete(datat, r)
+}
+
+// Purge removes request data stored for longer than maxAge, in seconds.
+// It returns the amount of requests removed.
+//
+// If maxAge <= 0, all request data is removed.
+//
+// This is only used for sanity check: in case context cleaning was not
+// properly set some request data can be kept forever, consuming an increasing
+// amount of memory. In case this is detected, Purge() must be called
+// periodically until the problem is fixed.
+func Purge(maxAge int) int {
+ mutex.Lock()
+ count := 0
+ if maxAge <= 0 {
+ count = len(data)
+ data = make(map[*http.Request]map[interface{}]interface{})
+ datat = make(map[*http.Request]int64)
+ } else {
+ min := time.Now().Unix() - int64(maxAge)
+ for r := range data {
+ if datat[r] < min {
+ clear(r)
+ count++
+ }
+ }
+ }
+ mutex.Unlock()
+ return count
+}
+
+// ClearHandler wraps an http.Handler and clears request values at the end
+// of a request lifetime.
+func ClearHandler(h http.Handler) http.Handler {
+ return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+ defer Clear(r)
+ h.ServeHTTP(w, r)
+ })
+}
diff --git a/config-generator/vendor/github.com/gorilla/context/doc.go b/config-generator/vendor/github.com/gorilla/context/doc.go
new file mode 100644
index 0000000..73c7400
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/context/doc.go
@@ -0,0 +1,82 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package context stores values shared during a request lifetime.
+
+For example, a router can set variables extracted from the URL and later
+application handlers can access those values, or it can be used to store
+sessions values to be saved at the end of a request. There are several
+others common uses.
+
+The idea was posted by Brad Fitzpatrick to the go-nuts mailing list:
+
+ http://groups.google.com/group/golang-nuts/msg/e2d679d303aa5d53
+
+Here's the basic usage: first define the keys that you will need. The key
+type is interface{} so a key can be of any type that supports equality.
+Here we define a key using a custom int type to avoid name collisions:
+
+ package foo
+
+ import (
+ "github.com/gorilla/context"
+ )
+
+ type key int
+
+ const MyKey key = 0
+
+Then set a variable. Variables are bound to an http.Request object, so you
+need a request instance to set a value:
+
+ context.Set(r, MyKey, "bar")
+
+The application can later access the variable using the same key you provided:
+
+ func MyHandler(w http.ResponseWriter, r *http.Request) {
+ // val is "bar".
+ val := context.Get(r, foo.MyKey)
+
+ // returns ("bar", true)
+ val, ok := context.GetOk(r, foo.MyKey)
+ // ...
+ }
+
+And that's all about the basic usage. We discuss some other ideas below.
+
+Any type can be stored in the context. To enforce a given type, make the key
+private and wrap Get() and Set() to accept and return values of a specific
+type:
+
+ type key int
+
+ const mykey key = 0
+
+ // GetMyKey returns a value for this package from the request values.
+ func GetMyKey(r *http.Request) SomeType {
+ if rv := context.Get(r, mykey); rv != nil {
+ return rv.(SomeType)
+ }
+ return nil
+ }
+
+ // SetMyKey sets a value for this package in the request values.
+ func SetMyKey(r *http.Request, val SomeType) {
+ context.Set(r, mykey, val)
+ }
+
+Variables must be cleared at the end of a request, to remove all values
+that were stored. This can be done in an http.Handler, after a request was
+served. Just call Clear() passing the request:
+
+ context.Clear(r)
+
+...or use ClearHandler(), which conveniently wraps an http.Handler to clear
+variables at the end of a request lifetime.
+
+The Routers from the packages gorilla/mux and gorilla/pat call Clear()
+so if you are using either of them you don't need to clear the context manually.
+*/
+package context
diff --git a/config-generator/vendor/github.com/gorilla/mux/.travis.yml b/config-generator/vendor/github.com/gorilla/mux/.travis.yml
new file mode 100644
index 0000000..f4084bd
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/mux/.travis.yml
@@ -0,0 +1,17 @@
+language: go
+sudo: false
+
+matrix:
+ include:
+ - go: 1.2
+ - go: 1.3
+ - go: 1.4
+ - go: 1.5
+ - go: 1.6
+ - go: tip
+
+script:
+ - go get -t -v ./...
+ - diff -u <(echo -n) <(gofmt -d .)
+ - go tool vet .
+ - go test -v -race ./...
diff --git a/config-generator/vendor/github.com/gorilla/mux/LICENSE b/config-generator/vendor/github.com/gorilla/mux/LICENSE
new file mode 100644
index 0000000..0e5fb87
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/mux/LICENSE
@@ -0,0 +1,27 @@
+Copyright (c) 2012 Rodrigo Moraes. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+ * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+ * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/config-generator/vendor/github.com/gorilla/mux/README.md b/config-generator/vendor/github.com/gorilla/mux/README.md
new file mode 100644
index 0000000..960ef7c
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/mux/README.md
@@ -0,0 +1,242 @@
+mux
+===
+[](https://godoc.org/github.com/gorilla/mux)
+[](https://travis-ci.org/gorilla/mux)
+
+http://www.gorillatoolkit.org/pkg/mux
+
+Package `gorilla/mux` implements a request router and dispatcher.
+
+The name mux stands for "HTTP request multiplexer". Like the standard `http.ServeMux`, `mux.Router` matches incoming requests against a list of registered routes and calls a handler for the route that matches the URL or other conditions. The main features are:
+
+* Requests can be matched based on URL host, path, path prefix, schemes, header and query values, HTTP methods or using custom matchers.
+* URL hosts and paths can have variables with an optional regular expression.
+* Registered URLs can be built, or "reversed", which helps maintaining references to resources.
+* Routes can be used as subrouters: nested routes are only tested if the parent route matches. This is useful to define groups of routes that share common conditions like a host, a path prefix or other repeated attributes. As a bonus, this optimizes request matching.
+* It implements the `http.Handler` interface so it is compatible with the standard `http.ServeMux`.
+
+Let's start registering a couple of URL paths and handlers:
+
+```go
+func main() {
+ r := mux.NewRouter()
+ r.HandleFunc("/", HomeHandler)
+ r.HandleFunc("/products", ProductsHandler)
+ r.HandleFunc("/articles", ArticlesHandler)
+ http.Handle("/", r)
+}
+```
+
+Here we register three routes mapping URL paths to handlers. This is equivalent to how `http.HandleFunc()` works: if an incoming request URL matches one of the paths, the corresponding handler is called passing (`http.ResponseWriter`, `*http.Request`) as parameters.
+
+Paths can have variables. They are defined using the format `{name}` or `{name:pattern}`. If a regular expression pattern is not defined, the matched variable will be anything until the next slash. For example:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/products/{key}", ProductHandler)
+r.HandleFunc("/articles/{category}/", ArticlesCategoryHandler)
+r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler)
+```
+
+The names are used to create a map of route variables which can be retrieved calling `mux.Vars()`:
+
+```go
+vars := mux.Vars(request)
+category := vars["category"]
+```
+
+And this is all you need to know about the basic usage. More advanced options are explained below.
+
+Routes can also be restricted to a domain or subdomain. Just define a host pattern to be matched. They can also have variables:
+
+```go
+r := mux.NewRouter()
+// Only matches if domain is "www.example.com".
+r.Host("www.example.com")
+// Matches a dynamic subdomain.
+r.Host("{subdomain:[a-z]+}.domain.com")
+```
+
+There are several other matchers that can be added. To match path prefixes:
+
+```go
+r.PathPrefix("/products/")
+```
+
+...or HTTP methods:
+
+```go
+r.Methods("GET", "POST")
+```
+
+...or URL schemes:
+
+```go
+r.Schemes("https")
+```
+
+...or header values:
+
+```go
+r.Headers("X-Requested-With", "XMLHttpRequest")
+```
+
+...or query values:
+
+```go
+r.Queries("key", "value")
+```
+
+...or to use a custom matcher function:
+
+```go
+r.MatcherFunc(func(r *http.Request, rm *RouteMatch) bool {
+ return r.ProtoMajor == 0
+})
+```
+
+...and finally, it is possible to combine several matchers in a single route:
+
+```go
+r.HandleFunc("/products", ProductsHandler).
+ Host("www.example.com").
+ Methods("GET").
+ Schemes("http")
+```
+
+Setting the same matching conditions again and again can be boring, so we have a way to group several routes that share the same requirements. We call it "subrouting".
+
+For example, let's say we have several URLs that should only match when the host is `www.example.com`. Create a route for that host and get a "subrouter" from it:
+
+```go
+r := mux.NewRouter()
+s := r.Host("www.example.com").Subrouter()
+```
+
+Then register routes in the subrouter:
+
+```go
+s.HandleFunc("/products/", ProductsHandler)
+s.HandleFunc("/products/{key}", ProductHandler)
+s.HandleFunc("/articles/{category}/{id:[0-9]+}"), ArticleHandler)
+```
+
+The three URL paths we registered above will only be tested if the domain is `www.example.com`, because the subrouter is tested first. This is not only convenient, but also optimizes request matching. You can create subrouters combining any attribute matchers accepted by a route.
+
+Subrouters can be used to create domain or path "namespaces": you define subrouters in a central place and then parts of the app can register its paths relatively to a given subrouter.
+
+There's one more thing about subroutes. When a subrouter has a path prefix, the inner routes use it as base for their paths:
+
+```go
+r := mux.NewRouter()
+s := r.PathPrefix("/products").Subrouter()
+// "/products/"
+s.HandleFunc("/", ProductsHandler)
+// "/products/{key}/"
+s.HandleFunc("/{key}/", ProductHandler)
+// "/products/{key}/details"
+s.HandleFunc("/{key}/details", ProductDetailsHandler)
+```
+
+Now let's see how to build registered URLs.
+
+Routes can be named. All routes that define a name can have their URLs built, or "reversed". We define a name calling `Name()` on a route. For example:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+ Name("article")
+```
+
+To build a URL, get the route and call the `URL()` method, passing a sequence of key/value pairs for the route variables. For the previous route, we would do:
+
+```go
+url, err := r.Get("article").URL("category", "technology", "id", "42")
+```
+
+...and the result will be a `url.URL` with the following path:
+
+```
+"/articles/technology/42"
+```
+
+This also works for host variables:
+
+```go
+r := mux.NewRouter()
+r.Host("{subdomain}.domain.com").
+ Path("/articles/{category}/{id:[0-9]+}").
+ HandlerFunc(ArticleHandler).
+ Name("article")
+
+// url.String() will be "http://news.domain.com/articles/technology/42"
+url, err := r.Get("article").URL("subdomain", "news",
+ "category", "technology",
+ "id", "42")
+```
+
+All variables defined in the route are required, and their values must conform to the corresponding patterns. These requirements guarantee that a generated URL will always match a registered route -- the only exception is for explicitly defined "build-only" routes which never match.
+
+Regex support also exists for matching Headers within a route. For example, we could do:
+
+```go
+r.HeadersRegexp("Content-Type", "application/(text|json)")
+```
+
+...and the route will match both requests with a Content-Type of `application/json` as well as `application/text`
+
+There's also a way to build only the URL host or path for a route: use the methods `URLHost()` or `URLPath()` instead. For the previous route, we would do:
+
+```go
+// "http://news.domain.com/"
+host, err := r.Get("article").URLHost("subdomain", "news")
+
+// "/articles/technology/42"
+path, err := r.Get("article").URLPath("category", "technology", "id", "42")
+```
+
+And if you use subrouters, host and path defined separately can be built as well:
+
+```go
+r := mux.NewRouter()
+s := r.Host("{subdomain}.domain.com").Subrouter()
+s.Path("/articles/{category}/{id:[0-9]+}").
+ HandlerFunc(ArticleHandler).
+ Name("article")
+
+// "http://news.domain.com/articles/technology/42"
+url, err := r.Get("article").URL("subdomain", "news",
+ "category", "technology",
+ "id", "42")
+```
+
+## Full Example
+
+Here's a complete, runnable example of a small `mux` based server:
+
+```go
+package main
+
+import (
+ "net/http"
+ "log"
+ "github.com/gorilla/mux"
+)
+
+func YourHandler(w http.ResponseWriter, r *http.Request) {
+ w.Write([]byte("Gorilla!\n"))
+}
+
+func main() {
+ r := mux.NewRouter()
+ // Routes consist of a path and a handler function.
+ r.HandleFunc("/", YourHandler)
+
+ // Bind to a port and pass our router in
+ log.Fatal(http.ListenAndServe(":8000", r))
+}
+```
+
+## License
+
+BSD licensed. See the LICENSE file for details.
diff --git a/config-generator/vendor/github.com/gorilla/mux/doc.go b/config-generator/vendor/github.com/gorilla/mux/doc.go
new file mode 100644
index 0000000..835f534
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/mux/doc.go
@@ -0,0 +1,206 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package mux implements a request router and dispatcher.
+
+The name mux stands for "HTTP request multiplexer". Like the standard
+http.ServeMux, mux.Router matches incoming requests against a list of
+registered routes and calls a handler for the route that matches the URL
+or other conditions. The main features are:
+
+ * Requests can be matched based on URL host, path, path prefix, schemes,
+ header and query values, HTTP methods or using custom matchers.
+ * URL hosts and paths can have variables with an optional regular
+ expression.
+ * Registered URLs can be built, or "reversed", which helps maintaining
+ references to resources.
+ * Routes can be used as subrouters: nested routes are only tested if the
+ parent route matches. This is useful to define groups of routes that
+ share common conditions like a host, a path prefix or other repeated
+ attributes. As a bonus, this optimizes request matching.
+ * It implements the http.Handler interface so it is compatible with the
+ standard http.ServeMux.
+
+Let's start registering a couple of URL paths and handlers:
+
+ func main() {
+ r := mux.NewRouter()
+ r.HandleFunc("/", HomeHandler)
+ r.HandleFunc("/products", ProductsHandler)
+ r.HandleFunc("/articles", ArticlesHandler)
+ http.Handle("/", r)
+ }
+
+Here we register three routes mapping URL paths to handlers. This is
+equivalent to how http.HandleFunc() works: if an incoming request URL matches
+one of the paths, the corresponding handler is called passing
+(http.ResponseWriter, *http.Request) as parameters.
+
+Paths can have variables. They are defined using the format {name} or
+{name:pattern}. If a regular expression pattern is not defined, the matched
+variable will be anything until the next slash. For example:
+
+ r := mux.NewRouter()
+ r.HandleFunc("/products/{key}", ProductHandler)
+ r.HandleFunc("/articles/{category}/", ArticlesCategoryHandler)
+ r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler)
+
+The names are used to create a map of route variables which can be retrieved
+calling mux.Vars():
+
+ vars := mux.Vars(request)
+ category := vars["category"]
+
+And this is all you need to know about the basic usage. More advanced options
+are explained below.
+
+Routes can also be restricted to a domain or subdomain. Just define a host
+pattern to be matched. They can also have variables:
+
+ r := mux.NewRouter()
+ // Only matches if domain is "www.example.com".
+ r.Host("www.example.com")
+ // Matches a dynamic subdomain.
+ r.Host("{subdomain:[a-z]+}.domain.com")
+
+There are several other matchers that can be added. To match path prefixes:
+
+ r.PathPrefix("/products/")
+
+...or HTTP methods:
+
+ r.Methods("GET", "POST")
+
+...or URL schemes:
+
+ r.Schemes("https")
+
+...or header values:
+
+ r.Headers("X-Requested-With", "XMLHttpRequest")
+
+...or query values:
+
+ r.Queries("key", "value")
+
+...or to use a custom matcher function:
+
+ r.MatcherFunc(func(r *http.Request, rm *RouteMatch) bool {
+ return r.ProtoMajor == 0
+ })
+
+...and finally, it is possible to combine several matchers in a single route:
+
+ r.HandleFunc("/products", ProductsHandler).
+ Host("www.example.com").
+ Methods("GET").
+ Schemes("http")
+
+Setting the same matching conditions again and again can be boring, so we have
+a way to group several routes that share the same requirements.
+We call it "subrouting".
+
+For example, let's say we have several URLs that should only match when the
+host is "www.example.com". Create a route for that host and get a "subrouter"
+from it:
+
+ r := mux.NewRouter()
+ s := r.Host("www.example.com").Subrouter()
+
+Then register routes in the subrouter:
+
+ s.HandleFunc("/products/", ProductsHandler)
+ s.HandleFunc("/products/{key}", ProductHandler)
+ s.HandleFunc("/articles/{category}/{id:[0-9]+}"), ArticleHandler)
+
+The three URL paths we registered above will only be tested if the domain is
+"www.example.com", because the subrouter is tested first. This is not
+only convenient, but also optimizes request matching. You can create
+subrouters combining any attribute matchers accepted by a route.
+
+Subrouters can be used to create domain or path "namespaces": you define
+subrouters in a central place and then parts of the app can register its
+paths relatively to a given subrouter.
+
+There's one more thing about subroutes. When a subrouter has a path prefix,
+the inner routes use it as base for their paths:
+
+ r := mux.NewRouter()
+ s := r.PathPrefix("/products").Subrouter()
+ // "/products/"
+ s.HandleFunc("/", ProductsHandler)
+ // "/products/{key}/"
+ s.HandleFunc("/{key}/", ProductHandler)
+ // "/products/{key}/details"
+ s.HandleFunc("/{key}/details", ProductDetailsHandler)
+
+Now let's see how to build registered URLs.
+
+Routes can be named. All routes that define a name can have their URLs built,
+or "reversed". We define a name calling Name() on a route. For example:
+
+ r := mux.NewRouter()
+ r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+ Name("article")
+
+To build a URL, get the route and call the URL() method, passing a sequence of
+key/value pairs for the route variables. For the previous route, we would do:
+
+ url, err := r.Get("article").URL("category", "technology", "id", "42")
+
+...and the result will be a url.URL with the following path:
+
+ "/articles/technology/42"
+
+This also works for host variables:
+
+ r := mux.NewRouter()
+ r.Host("{subdomain}.domain.com").
+ Path("/articles/{category}/{id:[0-9]+}").
+ HandlerFunc(ArticleHandler).
+ Name("article")
+
+ // url.String() will be "http://news.domain.com/articles/technology/42"
+ url, err := r.Get("article").URL("subdomain", "news",
+ "category", "technology",
+ "id", "42")
+
+All variables defined in the route are required, and their values must
+conform to the corresponding patterns. These requirements guarantee that a
+generated URL will always match a registered route -- the only exception is
+for explicitly defined "build-only" routes which never match.
+
+Regex support also exists for matching Headers within a route. For example, we could do:
+
+ r.HeadersRegexp("Content-Type", "application/(text|json)")
+
+...and the route will match both requests with a Content-Type of `application/json` as well as
+`application/text`
+
+There's also a way to build only the URL host or path for a route:
+use the methods URLHost() or URLPath() instead. For the previous route,
+we would do:
+
+ // "http://news.domain.com/"
+ host, err := r.Get("article").URLHost("subdomain", "news")
+
+ // "/articles/technology/42"
+ path, err := r.Get("article").URLPath("category", "technology", "id", "42")
+
+And if you use subrouters, host and path defined separately can be built
+as well:
+
+ r := mux.NewRouter()
+ s := r.Host("{subdomain}.domain.com").Subrouter()
+ s.Path("/articles/{category}/{id:[0-9]+}").
+ HandlerFunc(ArticleHandler).
+ Name("article")
+
+ // "http://news.domain.com/articles/technology/42"
+ url, err := r.Get("article").URL("subdomain", "news",
+ "category", "technology",
+ "id", "42")
+*/
+package mux
diff --git a/config-generator/vendor/github.com/gorilla/mux/mux.go b/config-generator/vendor/github.com/gorilla/mux/mux.go
new file mode 100644
index 0000000..94f5ddd
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/mux/mux.go
@@ -0,0 +1,499 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+ "errors"
+ "fmt"
+ "net/http"
+ "path"
+ "regexp"
+
+ "github.com/gorilla/context"
+)
+
+// NewRouter returns a new router instance.
+func NewRouter() *Router {
+ return &Router{namedRoutes: make(map[string]*Route), KeepContext: false}
+}
+
+// Router registers routes to be matched and dispatches a handler.
+//
+// It implements the http.Handler interface, so it can be registered to serve
+// requests:
+//
+// var router = mux.NewRouter()
+//
+// func main() {
+// http.Handle("/", router)
+// }
+//
+// Or, for Google App Engine, register it in a init() function:
+//
+// func init() {
+// http.Handle("/", router)
+// }
+//
+// This will send all incoming requests to the router.
+type Router struct {
+ // Configurable Handler to be used when no route matches.
+ NotFoundHandler http.Handler
+ // Parent route, if this is a subrouter.
+ parent parentRoute
+ // Routes to be matched, in order.
+ routes []*Route
+ // Routes by name for URL building.
+ namedRoutes map[string]*Route
+ // See Router.StrictSlash(). This defines the flag for new routes.
+ strictSlash bool
+ // See Router.SkipClean(). This defines the flag for new routes.
+ skipClean bool
+ // If true, do not clear the request context after handling the request
+ KeepContext bool
+}
+
+// Match matches registered routes against the request.
+func (r *Router) Match(req *http.Request, match *RouteMatch) bool {
+ for _, route := range r.routes {
+ if route.Match(req, match) {
+ return true
+ }
+ }
+
+ // Closest match for a router (includes sub-routers)
+ if r.NotFoundHandler != nil {
+ match.Handler = r.NotFoundHandler
+ return true
+ }
+ return false
+}
+
+// ServeHTTP dispatches the handler registered in the matched route.
+//
+// When there is a match, the route variables can be retrieved calling
+// mux.Vars(request).
+func (r *Router) ServeHTTP(w http.ResponseWriter, req *http.Request) {
+ if !r.skipClean {
+ // Clean path to canonical form and redirect.
+ if p := cleanPath(req.URL.Path); p != req.URL.Path {
+
+ // Added 3 lines (Philip Schlump) - It was dropping the query string and #whatever from query.
+ // This matches with fix in go 1.2 r.c. 4 for same problem. Go Issue:
+ // http://code.google.com/p/go/issues/detail?id=5252
+ url := *req.URL
+ url.Path = p
+ p = url.String()
+
+ w.Header().Set("Location", p)
+ w.WriteHeader(http.StatusMovedPermanently)
+ return
+ }
+ }
+ var match RouteMatch
+ var handler http.Handler
+ if r.Match(req, &match) {
+ handler = match.Handler
+ setVars(req, match.Vars)
+ setCurrentRoute(req, match.Route)
+ }
+ if handler == nil {
+ handler = http.NotFoundHandler()
+ }
+ if !r.KeepContext {
+ defer context.Clear(req)
+ }
+ handler.ServeHTTP(w, req)
+}
+
+// Get returns a route registered with the given name.
+func (r *Router) Get(name string) *Route {
+ return r.getNamedRoutes()[name]
+}
+
+// GetRoute returns a route registered with the given name. This method
+// was renamed to Get() and remains here for backwards compatibility.
+func (r *Router) GetRoute(name string) *Route {
+ return r.getNamedRoutes()[name]
+}
+
+// StrictSlash defines the trailing slash behavior for new routes. The initial
+// value is false.
+//
+// When true, if the route path is "/path/", accessing "/path" will redirect
+// to the former and vice versa. In other words, your application will always
+// see the path as specified in the route.
+//
+// When false, if the route path is "/path", accessing "/path/" will not match
+// this route and vice versa.
+//
+// Special case: when a route sets a path prefix using the PathPrefix() method,
+// strict slash is ignored for that route because the redirect behavior can't
+// be determined from a prefix alone. However, any subrouters created from that
+// route inherit the original StrictSlash setting.
+func (r *Router) StrictSlash(value bool) *Router {
+ r.strictSlash = value
+ return r
+}
+
+// SkipClean defines the path cleaning behaviour for new routes. The initial
+// value is false. Users should be careful about which routes are not cleaned
+//
+// When true, if the route path is "/path//to", it will remain with the double
+// slash. This is helpful if you have a route like: /fetch/http://xkcd.com/534/
+//
+// When false, the path will be cleaned, so /fetch/http://xkcd.com/534/ will
+// become /fetch/http/xkcd.com/534
+func (r *Router) SkipClean(value bool) *Router {
+ r.skipClean = value
+ return r
+}
+
+// ----------------------------------------------------------------------------
+// parentRoute
+// ----------------------------------------------------------------------------
+
+// getNamedRoutes returns the map where named routes are registered.
+func (r *Router) getNamedRoutes() map[string]*Route {
+ if r.namedRoutes == nil {
+ if r.parent != nil {
+ r.namedRoutes = r.parent.getNamedRoutes()
+ } else {
+ r.namedRoutes = make(map[string]*Route)
+ }
+ }
+ return r.namedRoutes
+}
+
+// getRegexpGroup returns regexp definitions from the parent route, if any.
+func (r *Router) getRegexpGroup() *routeRegexpGroup {
+ if r.parent != nil {
+ return r.parent.getRegexpGroup()
+ }
+ return nil
+}
+
+func (r *Router) buildVars(m map[string]string) map[string]string {
+ if r.parent != nil {
+ m = r.parent.buildVars(m)
+ }
+ return m
+}
+
+// ----------------------------------------------------------------------------
+// Route factories
+// ----------------------------------------------------------------------------
+
+// NewRoute registers an empty route.
+func (r *Router) NewRoute() *Route {
+ route := &Route{parent: r, strictSlash: r.strictSlash, skipClean: r.skipClean}
+ r.routes = append(r.routes, route)
+ return route
+}
+
+// Handle registers a new route with a matcher for the URL path.
+// See Route.Path() and Route.Handler().
+func (r *Router) Handle(path string, handler http.Handler) *Route {
+ return r.NewRoute().Path(path).Handler(handler)
+}
+
+// HandleFunc registers a new route with a matcher for the URL path.
+// See Route.Path() and Route.HandlerFunc().
+func (r *Router) HandleFunc(path string, f func(http.ResponseWriter,
+ *http.Request)) *Route {
+ return r.NewRoute().Path(path).HandlerFunc(f)
+}
+
+// Headers registers a new route with a matcher for request header values.
+// See Route.Headers().
+func (r *Router) Headers(pairs ...string) *Route {
+ return r.NewRoute().Headers(pairs...)
+}
+
+// Host registers a new route with a matcher for the URL host.
+// See Route.Host().
+func (r *Router) Host(tpl string) *Route {
+ return r.NewRoute().Host(tpl)
+}
+
+// MatcherFunc registers a new route with a custom matcher function.
+// See Route.MatcherFunc().
+func (r *Router) MatcherFunc(f MatcherFunc) *Route {
+ return r.NewRoute().MatcherFunc(f)
+}
+
+// Methods registers a new route with a matcher for HTTP methods.
+// See Route.Methods().
+func (r *Router) Methods(methods ...string) *Route {
+ return r.NewRoute().Methods(methods...)
+}
+
+// Path registers a new route with a matcher for the URL path.
+// See Route.Path().
+func (r *Router) Path(tpl string) *Route {
+ return r.NewRoute().Path(tpl)
+}
+
+// PathPrefix registers a new route with a matcher for the URL path prefix.
+// See Route.PathPrefix().
+func (r *Router) PathPrefix(tpl string) *Route {
+ return r.NewRoute().PathPrefix(tpl)
+}
+
+// Queries registers a new route with a matcher for URL query values.
+// See Route.Queries().
+func (r *Router) Queries(pairs ...string) *Route {
+ return r.NewRoute().Queries(pairs...)
+}
+
+// Schemes registers a new route with a matcher for URL schemes.
+// See Route.Schemes().
+func (r *Router) Schemes(schemes ...string) *Route {
+ return r.NewRoute().Schemes(schemes...)
+}
+
+// BuildVarsFunc registers a new route with a custom function for modifying
+// route variables before building a URL.
+func (r *Router) BuildVarsFunc(f BuildVarsFunc) *Route {
+ return r.NewRoute().BuildVarsFunc(f)
+}
+
+// Walk walks the router and all its sub-routers, calling walkFn for each route
+// in the tree. The routes are walked in the order they were added. Sub-routers
+// are explored depth-first.
+func (r *Router) Walk(walkFn WalkFunc) error {
+ return r.walk(walkFn, []*Route{})
+}
+
+// SkipRouter is used as a return value from WalkFuncs to indicate that the
+// router that walk is about to descend down to should be skipped.
+var SkipRouter = errors.New("skip this router")
+
+// WalkFunc is the type of the function called for each route visited by Walk.
+// At every invocation, it is given the current route, and the current router,
+// and a list of ancestor routes that lead to the current route.
+type WalkFunc func(route *Route, router *Router, ancestors []*Route) error
+
+func (r *Router) walk(walkFn WalkFunc, ancestors []*Route) error {
+ for _, t := range r.routes {
+ if t.regexp == nil || t.regexp.path == nil || t.regexp.path.template == "" {
+ continue
+ }
+
+ err := walkFn(t, r, ancestors)
+ if err == SkipRouter {
+ continue
+ }
+ for _, sr := range t.matchers {
+ if h, ok := sr.(*Router); ok {
+ err := h.walk(walkFn, ancestors)
+ if err != nil {
+ return err
+ }
+ }
+ }
+ if h, ok := t.handler.(*Router); ok {
+ ancestors = append(ancestors, t)
+ err := h.walk(walkFn, ancestors)
+ if err != nil {
+ return err
+ }
+ ancestors = ancestors[:len(ancestors)-1]
+ }
+ }
+ return nil
+}
+
+// ----------------------------------------------------------------------------
+// Context
+// ----------------------------------------------------------------------------
+
+// RouteMatch stores information about a matched route.
+type RouteMatch struct {
+ Route *Route
+ Handler http.Handler
+ Vars map[string]string
+}
+
+type contextKey int
+
+const (
+ varsKey contextKey = iota
+ routeKey
+)
+
+// Vars returns the route variables for the current request, if any.
+func Vars(r *http.Request) map[string]string {
+ if rv := context.Get(r, varsKey); rv != nil {
+ return rv.(map[string]string)
+ }
+ return nil
+}
+
+// CurrentRoute returns the matched route for the current request, if any.
+// This only works when called inside the handler of the matched route
+// because the matched route is stored in the request context which is cleared
+// after the handler returns, unless the KeepContext option is set on the
+// Router.
+func CurrentRoute(r *http.Request) *Route {
+ if rv := context.Get(r, routeKey); rv != nil {
+ return rv.(*Route)
+ }
+ return nil
+}
+
+func setVars(r *http.Request, val interface{}) {
+ if val != nil {
+ context.Set(r, varsKey, val)
+ }
+}
+
+func setCurrentRoute(r *http.Request, val interface{}) {
+ if val != nil {
+ context.Set(r, routeKey, val)
+ }
+}
+
+// ----------------------------------------------------------------------------
+// Helpers
+// ----------------------------------------------------------------------------
+
+// cleanPath returns the canonical path for p, eliminating . and .. elements.
+// Borrowed from the net/http package.
+func cleanPath(p string) string {
+ if p == "" {
+ return "/"
+ }
+ if p[0] != '/' {
+ p = "/" + p
+ }
+ np := path.Clean(p)
+ // path.Clean removes trailing slash except for root;
+ // put the trailing slash back if necessary.
+ if p[len(p)-1] == '/' && np != "/" {
+ np += "/"
+ }
+
+ return np
+}
+
+// uniqueVars returns an error if two slices contain duplicated strings.
+func uniqueVars(s1, s2 []string) error {
+ for _, v1 := range s1 {
+ for _, v2 := range s2 {
+ if v1 == v2 {
+ return fmt.Errorf("mux: duplicated route variable %q", v2)
+ }
+ }
+ }
+ return nil
+}
+
+// checkPairs returns the count of strings passed in, and an error if
+// the count is not an even number.
+func checkPairs(pairs ...string) (int, error) {
+ length := len(pairs)
+ if length%2 != 0 {
+ return length, fmt.Errorf(
+ "mux: number of parameters must be multiple of 2, got %v", pairs)
+ }
+ return length, nil
+}
+
+// mapFromPairsToString converts variadic string parameters to a
+// string to string map.
+func mapFromPairsToString(pairs ...string) (map[string]string, error) {
+ length, err := checkPairs(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ m := make(map[string]string, length/2)
+ for i := 0; i < length; i += 2 {
+ m[pairs[i]] = pairs[i+1]
+ }
+ return m, nil
+}
+
+// mapFromPairsToRegex converts variadic string paramers to a
+// string to regex map.
+func mapFromPairsToRegex(pairs ...string) (map[string]*regexp.Regexp, error) {
+ length, err := checkPairs(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ m := make(map[string]*regexp.Regexp, length/2)
+ for i := 0; i < length; i += 2 {
+ regex, err := regexp.Compile(pairs[i+1])
+ if err != nil {
+ return nil, err
+ }
+ m[pairs[i]] = regex
+ }
+ return m, nil
+}
+
+// matchInArray returns true if the given string value is in the array.
+func matchInArray(arr []string, value string) bool {
+ for _, v := range arr {
+ if v == value {
+ return true
+ }
+ }
+ return false
+}
+
+// matchMapWithString returns true if the given key/value pairs exist in a given map.
+func matchMapWithString(toCheck map[string]string, toMatch map[string][]string, canonicalKey bool) bool {
+ for k, v := range toCheck {
+ // Check if key exists.
+ if canonicalKey {
+ k = http.CanonicalHeaderKey(k)
+ }
+ if values := toMatch[k]; values == nil {
+ return false
+ } else if v != "" {
+ // If value was defined as an empty string we only check that the
+ // key exists. Otherwise we also check for equality.
+ valueExists := false
+ for _, value := range values {
+ if v == value {
+ valueExists = true
+ break
+ }
+ }
+ if !valueExists {
+ return false
+ }
+ }
+ }
+ return true
+}
+
+// matchMapWithRegex returns true if the given key/value pairs exist in a given map compiled against
+// the given regex
+func matchMapWithRegex(toCheck map[string]*regexp.Regexp, toMatch map[string][]string, canonicalKey bool) bool {
+ for k, v := range toCheck {
+ // Check if key exists.
+ if canonicalKey {
+ k = http.CanonicalHeaderKey(k)
+ }
+ if values := toMatch[k]; values == nil {
+ return false
+ } else if v != nil {
+ // If value was defined as an empty string we only check that the
+ // key exists. Otherwise we also check for equality.
+ valueExists := false
+ for _, value := range values {
+ if v.MatchString(value) {
+ valueExists = true
+ break
+ }
+ }
+ if !valueExists {
+ return false
+ }
+ }
+ }
+ return true
+}
diff --git a/config-generator/vendor/github.com/gorilla/mux/regexp.go b/config-generator/vendor/github.com/gorilla/mux/regexp.go
new file mode 100644
index 0000000..08710bc
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/mux/regexp.go
@@ -0,0 +1,312 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+ "bytes"
+ "fmt"
+ "net/http"
+ "net/url"
+ "regexp"
+ "strconv"
+ "strings"
+)
+
+// newRouteRegexp parses a route template and returns a routeRegexp,
+// used to match a host, a path or a query string.
+//
+// It will extract named variables, assemble a regexp to be matched, create
+// a "reverse" template to build URLs and compile regexps to validate variable
+// values used in URL building.
+//
+// Previously we accepted only Python-like identifiers for variable
+// names ([a-zA-Z_][a-zA-Z0-9_]*), but currently the only restriction is that
+// name and pattern can't be empty, and names can't contain a colon.
+func newRouteRegexp(tpl string, matchHost, matchPrefix, matchQuery, strictSlash bool) (*routeRegexp, error) {
+ // Check if it is well-formed.
+ idxs, errBraces := braceIndices(tpl)
+ if errBraces != nil {
+ return nil, errBraces
+ }
+ // Backup the original.
+ template := tpl
+ // Now let's parse it.
+ defaultPattern := "[^/]+"
+ if matchQuery {
+ defaultPattern = "[^?&]*"
+ } else if matchHost {
+ defaultPattern = "[^.]+"
+ matchPrefix = false
+ }
+ // Only match strict slash if not matching
+ if matchPrefix || matchHost || matchQuery {
+ strictSlash = false
+ }
+ // Set a flag for strictSlash.
+ endSlash := false
+ if strictSlash && strings.HasSuffix(tpl, "/") {
+ tpl = tpl[:len(tpl)-1]
+ endSlash = true
+ }
+ varsN := make([]string, len(idxs)/2)
+ varsR := make([]*regexp.Regexp, len(idxs)/2)
+ pattern := bytes.NewBufferString("")
+ pattern.WriteByte('^')
+ reverse := bytes.NewBufferString("")
+ var end int
+ var err error
+ for i := 0; i < len(idxs); i += 2 {
+ // Set all values we are interested in.
+ raw := tpl[end:idxs[i]]
+ end = idxs[i+1]
+ parts := strings.SplitN(tpl[idxs[i]+1:end-1], ":", 2)
+ name := parts[0]
+ patt := defaultPattern
+ if len(parts) == 2 {
+ patt = parts[1]
+ }
+ // Name or pattern can't be empty.
+ if name == "" || patt == "" {
+ return nil, fmt.Errorf("mux: missing name or pattern in %q",
+ tpl[idxs[i]:end])
+ }
+ // Build the regexp pattern.
+ fmt.Fprintf(pattern, "%s(?P<%s>%s)", regexp.QuoteMeta(raw), varGroupName(i/2), patt)
+
+ // Build the reverse template.
+ fmt.Fprintf(reverse, "%s%%s", raw)
+
+ // Append variable name and compiled pattern.
+ varsN[i/2] = name
+ varsR[i/2], err = regexp.Compile(fmt.Sprintf("^%s$", patt))
+ if err != nil {
+ return nil, err
+ }
+ }
+ // Add the remaining.
+ raw := tpl[end:]
+ pattern.WriteString(regexp.QuoteMeta(raw))
+ if strictSlash {
+ pattern.WriteString("[/]?")
+ }
+ if matchQuery {
+ // Add the default pattern if the query value is empty
+ if queryVal := strings.SplitN(template, "=", 2)[1]; queryVal == "" {
+ pattern.WriteString(defaultPattern)
+ }
+ }
+ if !matchPrefix {
+ pattern.WriteByte('$')
+ }
+ reverse.WriteString(raw)
+ if endSlash {
+ reverse.WriteByte('/')
+ }
+ // Compile full regexp.
+ reg, errCompile := regexp.Compile(pattern.String())
+ if errCompile != nil {
+ return nil, errCompile
+ }
+ // Done!
+ return &routeRegexp{
+ template: template,
+ matchHost: matchHost,
+ matchQuery: matchQuery,
+ strictSlash: strictSlash,
+ regexp: reg,
+ reverse: reverse.String(),
+ varsN: varsN,
+ varsR: varsR,
+ }, nil
+}
+
+// routeRegexp stores a regexp to match a host or path and information to
+// collect and validate route variables.
+type routeRegexp struct {
+ // The unmodified template.
+ template string
+ // True for host match, false for path or query string match.
+ matchHost bool
+ // True for query string match, false for path and host match.
+ matchQuery bool
+ // The strictSlash value defined on the route, but disabled if PathPrefix was used.
+ strictSlash bool
+ // Expanded regexp.
+ regexp *regexp.Regexp
+ // Reverse template.
+ reverse string
+ // Variable names.
+ varsN []string
+ // Variable regexps (validators).
+ varsR []*regexp.Regexp
+}
+
+// Match matches the regexp against the URL host or path.
+func (r *routeRegexp) Match(req *http.Request, match *RouteMatch) bool {
+ if !r.matchHost {
+ if r.matchQuery {
+ return r.matchQueryString(req)
+ }
+
+ return r.regexp.MatchString(req.URL.Path)
+ }
+
+ return r.regexp.MatchString(getHost(req))
+}
+
+// url builds a URL part using the given values.
+func (r *routeRegexp) url(values map[string]string) (string, error) {
+ urlValues := make([]interface{}, len(r.varsN))
+ for k, v := range r.varsN {
+ value, ok := values[v]
+ if !ok {
+ return "", fmt.Errorf("mux: missing route variable %q", v)
+ }
+ urlValues[k] = value
+ }
+ rv := fmt.Sprintf(r.reverse, urlValues...)
+ if !r.regexp.MatchString(rv) {
+ // The URL is checked against the full regexp, instead of checking
+ // individual variables. This is faster but to provide a good error
+ // message, we check individual regexps if the URL doesn't match.
+ for k, v := range r.varsN {
+ if !r.varsR[k].MatchString(values[v]) {
+ return "", fmt.Errorf(
+ "mux: variable %q doesn't match, expected %q", values[v],
+ r.varsR[k].String())
+ }
+ }
+ }
+ return rv, nil
+}
+
+// getURLQuery returns a single query parameter from a request URL.
+// For a URL with foo=bar&baz=ding, we return only the relevant key
+// value pair for the routeRegexp.
+func (r *routeRegexp) getURLQuery(req *http.Request) string {
+ if !r.matchQuery {
+ return ""
+ }
+ templateKey := strings.SplitN(r.template, "=", 2)[0]
+ for key, vals := range req.URL.Query() {
+ if key == templateKey && len(vals) > 0 {
+ return key + "=" + vals[0]
+ }
+ }
+ return ""
+}
+
+func (r *routeRegexp) matchQueryString(req *http.Request) bool {
+ return r.regexp.MatchString(r.getURLQuery(req))
+}
+
+// braceIndices returns the first level curly brace indices from a string.
+// It returns an error in case of unbalanced braces.
+func braceIndices(s string) ([]int, error) {
+ var level, idx int
+ var idxs []int
+ for i := 0; i < len(s); i++ {
+ switch s[i] {
+ case '{':
+ if level++; level == 1 {
+ idx = i
+ }
+ case '}':
+ if level--; level == 0 {
+ idxs = append(idxs, idx, i+1)
+ } else if level < 0 {
+ return nil, fmt.Errorf("mux: unbalanced braces in %q", s)
+ }
+ }
+ }
+ if level != 0 {
+ return nil, fmt.Errorf("mux: unbalanced braces in %q", s)
+ }
+ return idxs, nil
+}
+
+// varGroupName builds a capturing group name for the indexed variable.
+func varGroupName(idx int) string {
+ return "v" + strconv.Itoa(idx)
+}
+
+// ----------------------------------------------------------------------------
+// routeRegexpGroup
+// ----------------------------------------------------------------------------
+
+// routeRegexpGroup groups the route matchers that carry variables.
+type routeRegexpGroup struct {
+ host *routeRegexp
+ path *routeRegexp
+ queries []*routeRegexp
+}
+
+// setMatch extracts the variables from the URL once a route matches.
+func (v *routeRegexpGroup) setMatch(req *http.Request, m *RouteMatch, r *Route) {
+ // Store host variables.
+ if v.host != nil {
+ host := getHost(req)
+ matches := v.host.regexp.FindStringSubmatchIndex(host)
+ if len(matches) > 0 {
+ extractVars(host, matches, v.host.varsN, m.Vars)
+ }
+ }
+ // Store path variables.
+ if v.path != nil {
+ matches := v.path.regexp.FindStringSubmatchIndex(req.URL.Path)
+ if len(matches) > 0 {
+ extractVars(req.URL.Path, matches, v.path.varsN, m.Vars)
+ // Check if we should redirect.
+ if v.path.strictSlash {
+ p1 := strings.HasSuffix(req.URL.Path, "/")
+ p2 := strings.HasSuffix(v.path.template, "/")
+ if p1 != p2 {
+ u, _ := url.Parse(req.URL.String())
+ if p1 {
+ u.Path = u.Path[:len(u.Path)-1]
+ } else {
+ u.Path += "/"
+ }
+ m.Handler = http.RedirectHandler(u.String(), 301)
+ }
+ }
+ }
+ }
+ // Store query string variables.
+ for _, q := range v.queries {
+ queryURL := q.getURLQuery(req)
+ matches := q.regexp.FindStringSubmatchIndex(queryURL)
+ if len(matches) > 0 {
+ extractVars(queryURL, matches, q.varsN, m.Vars)
+ }
+ }
+}
+
+// getHost tries its best to return the request host.
+func getHost(r *http.Request) string {
+ if r.URL.IsAbs() {
+ return r.URL.Host
+ }
+ host := r.Host
+ // Slice off any port information.
+ if i := strings.Index(host, ":"); i != -1 {
+ host = host[:i]
+ }
+ return host
+
+}
+
+func extractVars(input string, matches []int, names []string, output map[string]string) {
+ matchesCount := 0
+ prevEnd := -1
+ for i := 2; i < len(matches) && matchesCount < len(names); i += 2 {
+ if prevEnd < matches[i+1] {
+ value := input[matches[i]:matches[i+1]]
+ output[names[matchesCount]] = value
+ prevEnd = matches[i+1]
+ matchesCount++
+ }
+ }
+}
diff --git a/config-generator/vendor/github.com/gorilla/mux/route.go b/config-generator/vendor/github.com/gorilla/mux/route.go
new file mode 100644
index 0000000..6c53f9f
--- /dev/null
+++ b/config-generator/vendor/github.com/gorilla/mux/route.go
@@ -0,0 +1,634 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+ "errors"
+ "fmt"
+ "net/http"
+ "net/url"
+ "regexp"
+ "strings"
+)
+
+// Route stores information to match a request and build URLs.
+type Route struct {
+ // Parent where the route was registered (a Router).
+ parent parentRoute
+ // Request handler for the route.
+ handler http.Handler
+ // List of matchers.
+ matchers []matcher
+ // Manager for the variables from host and path.
+ regexp *routeRegexpGroup
+ // If true, when the path pattern is "/path/", accessing "/path" will
+ // redirect to the former and vice versa.
+ strictSlash bool
+ // If true, when the path pattern is "/path//to", accessing "/path//to"
+ // will not redirect
+ skipClean bool
+ // If true, this route never matches: it is only used to build URLs.
+ buildOnly bool
+ // The name used to build URLs.
+ name string
+ // Error resulted from building a route.
+ err error
+
+ buildVarsFunc BuildVarsFunc
+}
+
+func (r *Route) SkipClean() bool {
+ return r.skipClean
+}
+
+// Match matches the route against the request.
+func (r *Route) Match(req *http.Request, match *RouteMatch) bool {
+ if r.buildOnly || r.err != nil {
+ return false
+ }
+ // Match everything.
+ for _, m := range r.matchers {
+ if matched := m.Match(req, match); !matched {
+ return false
+ }
+ }
+ // Yay, we have a match. Let's collect some info about it.
+ if match.Route == nil {
+ match.Route = r
+ }
+ if match.Handler == nil {
+ match.Handler = r.handler
+ }
+ if match.Vars == nil {
+ match.Vars = make(map[string]string)
+ }
+ // Set variables.
+ if r.regexp != nil {
+ r.regexp.setMatch(req, match, r)
+ }
+ return true
+}
+
+// ----------------------------------------------------------------------------
+// Route attributes
+// ----------------------------------------------------------------------------
+
+// GetError returns an error resulted from building the route, if any.
+func (r *Route) GetError() error {
+ return r.err
+}
+
+// BuildOnly sets the route to never match: it is only used to build URLs.
+func (r *Route) BuildOnly() *Route {
+ r.buildOnly = true
+ return r
+}
+
+// Handler --------------------------------------------------------------------
+
+// Handler sets a handler for the route.
+func (r *Route) Handler(handler http.Handler) *Route {
+ if r.err == nil {
+ r.handler = handler
+ }
+ return r
+}
+
+// HandlerFunc sets a handler function for the route.
+func (r *Route) HandlerFunc(f func(http.ResponseWriter, *http.Request)) *Route {
+ return r.Handler(http.HandlerFunc(f))
+}
+
+// GetHandler returns the handler for the route, if any.
+func (r *Route) GetHandler() http.Handler {
+ return r.handler
+}
+
+// Name -----------------------------------------------------------------------
+
+// Name sets the name for the route, used to build URLs.
+// If the name was registered already it will be overwritten.
+func (r *Route) Name(name string) *Route {
+ if r.name != "" {
+ r.err = fmt.Errorf("mux: route already has name %q, can't set %q",
+ r.name, name)
+ }
+ if r.err == nil {
+ r.name = name
+ r.getNamedRoutes()[name] = r
+ }
+ return r
+}
+
+// GetName returns the name for the route, if any.
+func (r *Route) GetName() string {
+ return r.name
+}
+
+// ----------------------------------------------------------------------------
+// Matchers
+// ----------------------------------------------------------------------------
+
+// matcher types try to match a request.
+type matcher interface {
+ Match(*http.Request, *RouteMatch) bool
+}
+
+// addMatcher adds a matcher to the route.
+func (r *Route) addMatcher(m matcher) *Route {
+ if r.err == nil {
+ r.matchers = append(r.matchers, m)
+ }
+ return r
+}
+
+// addRegexpMatcher adds a host or path matcher and builder to a route.
+func (r *Route) addRegexpMatcher(tpl string, matchHost, matchPrefix, matchQuery bool) error {
+ if r.err != nil {
+ return r.err
+ }
+ r.regexp = r.getRegexpGroup()
+ if !matchHost && !matchQuery {
+ if len(tpl) == 0 || tpl[0] != '/' {
+ return fmt.Errorf("mux: path must start with a slash, got %q", tpl)
+ }
+ if r.regexp.path != nil {
+ tpl = strings.TrimRight(r.regexp.path.template, "/") + tpl
+ }
+ }
+ rr, err := newRouteRegexp(tpl, matchHost, matchPrefix, matchQuery, r.strictSlash)
+ if err != nil {
+ return err
+ }
+ for _, q := range r.regexp.queries {
+ if err = uniqueVars(rr.varsN, q.varsN); err != nil {
+ return err
+ }
+ }
+ if matchHost {
+ if r.regexp.path != nil {
+ if err = uniqueVars(rr.varsN, r.regexp.path.varsN); err != nil {
+ return err
+ }
+ }
+ r.regexp.host = rr
+ } else {
+ if r.regexp.host != nil {
+ if err = uniqueVars(rr.varsN, r.regexp.host.varsN); err != nil {
+ return err
+ }
+ }
+ if matchQuery {
+ r.regexp.queries = append(r.regexp.queries, rr)
+ } else {
+ r.regexp.path = rr
+ }
+ }
+ r.addMatcher(rr)
+ return nil
+}
+
+// Headers --------------------------------------------------------------------
+
+// headerMatcher matches the request against header values.
+type headerMatcher map[string]string
+
+func (m headerMatcher) Match(r *http.Request, match *RouteMatch) bool {
+ return matchMapWithString(m, r.Header, true)
+}
+
+// Headers adds a matcher for request header values.
+// It accepts a sequence of key/value pairs to be matched. For example:
+//
+// r := mux.NewRouter()
+// r.Headers("Content-Type", "application/json",
+// "X-Requested-With", "XMLHttpRequest")
+//
+// The above route will only match if both request header values match.
+// If the value is an empty string, it will match any value if the key is set.
+func (r *Route) Headers(pairs ...string) *Route {
+ if r.err == nil {
+ var headers map[string]string
+ headers, r.err = mapFromPairsToString(pairs...)
+ return r.addMatcher(headerMatcher(headers))
+ }
+ return r
+}
+
+// headerRegexMatcher matches the request against the route given a regex for the header
+type headerRegexMatcher map[string]*regexp.Regexp
+
+func (m headerRegexMatcher) Match(r *http.Request, match *RouteMatch) bool {
+ return matchMapWithRegex(m, r.Header, true)
+}
+
+// HeadersRegexp accepts a sequence of key/value pairs, where the value has regex
+// support. For example:
+//
+// r := mux.NewRouter()
+// r.HeadersRegexp("Content-Type", "application/(text|json)",
+// "X-Requested-With", "XMLHttpRequest")
+//
+// The above route will only match if both the request header matches both regular expressions.
+// It the value is an empty string, it will match any value if the key is set.
+func (r *Route) HeadersRegexp(pairs ...string) *Route {
+ if r.err == nil {
+ var headers map[string]*regexp.Regexp
+ headers, r.err = mapFromPairsToRegex(pairs...)
+ return r.addMatcher(headerRegexMatcher(headers))
+ }
+ return r
+}
+
+// Host -----------------------------------------------------------------------
+
+// Host adds a matcher for the URL host.
+// It accepts a template with zero or more URL variables enclosed by {}.
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next dot.
+//
+// - {name:pattern} matches the given regexp pattern.
+//
+// For example:
+//
+// r := mux.NewRouter()
+// r.Host("www.example.com")
+// r.Host("{subdomain}.domain.com")
+// r.Host("{subdomain:[a-z]+}.domain.com")
+//
+// Variable names must be unique in a given route. They can be retrieved
+// calling mux.Vars(request).
+func (r *Route) Host(tpl string) *Route {
+ r.err = r.addRegexpMatcher(tpl, true, false, false)
+ return r
+}
+
+// MatcherFunc ----------------------------------------------------------------
+
+// MatcherFunc is the function signature used by custom matchers.
+type MatcherFunc func(*http.Request, *RouteMatch) bool
+
+// Match returns the match for a given request.
+func (m MatcherFunc) Match(r *http.Request, match *RouteMatch) bool {
+ return m(r, match)
+}
+
+// MatcherFunc adds a custom function to be used as request matcher.
+func (r *Route) MatcherFunc(f MatcherFunc) *Route {
+ return r.addMatcher(f)
+}
+
+// Methods --------------------------------------------------------------------
+
+// methodMatcher matches the request against HTTP methods.
+type methodMatcher []string
+
+func (m methodMatcher) Match(r *http.Request, match *RouteMatch) bool {
+ return matchInArray(m, r.Method)
+}
+
+// Methods adds a matcher for HTTP methods.
+// It accepts a sequence of one or more methods to be matched, e.g.:
+// "GET", "POST", "PUT".
+func (r *Route) Methods(methods ...string) *Route {
+ for k, v := range methods {
+ methods[k] = strings.ToUpper(v)
+ }
+ return r.addMatcher(methodMatcher(methods))
+}
+
+// Path -----------------------------------------------------------------------
+
+// Path adds a matcher for the URL path.
+// It accepts a template with zero or more URL variables enclosed by {}. The
+// template must start with a "/".
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next slash.
+//
+// - {name:pattern} matches the given regexp pattern.
+//
+// For example:
+//
+// r := mux.NewRouter()
+// r.Path("/products/").Handler(ProductsHandler)
+// r.Path("/products/{key}").Handler(ProductsHandler)
+// r.Path("/articles/{category}/{id:[0-9]+}").
+// Handler(ArticleHandler)
+//
+// Variable names must be unique in a given route. They can be retrieved
+// calling mux.Vars(request).
+func (r *Route) Path(tpl string) *Route {
+ r.err = r.addRegexpMatcher(tpl, false, false, false)
+ return r
+}
+
+// PathPrefix -----------------------------------------------------------------
+
+// PathPrefix adds a matcher for the URL path prefix. This matches if the given
+// template is a prefix of the full URL path. See Route.Path() for details on
+// the tpl argument.
+//
+// Note that it does not treat slashes specially ("/foobar/" will be matched by
+// the prefix "/foo") so you may want to use a trailing slash here.
+//
+// Also note that the setting of Router.StrictSlash() has no effect on routes
+// with a PathPrefix matcher.
+func (r *Route) PathPrefix(tpl string) *Route {
+ r.err = r.addRegexpMatcher(tpl, false, true, false)
+ return r
+}
+
+// Query ----------------------------------------------------------------------
+
+// Queries adds a matcher for URL query values.
+// It accepts a sequence of key/value pairs. Values may define variables.
+// For example:
+//
+// r := mux.NewRouter()
+// r.Queries("foo", "bar", "id", "{id:[0-9]+}")
+//
+// The above route will only match if the URL contains the defined queries
+// values, e.g.: ?foo=bar&id=42.
+//
+// It the value is an empty string, it will match any value if the key is set.
+//
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next slash.
+//
+// - {name:pattern} matches the given regexp pattern.
+func (r *Route) Queries(pairs ...string) *Route {
+ length := len(pairs)
+ if length%2 != 0 {
+ r.err = fmt.Errorf(
+ "mux: number of parameters must be multiple of 2, got %v", pairs)
+ return nil
+ }
+ for i := 0; i < length; i += 2 {
+ if r.err = r.addRegexpMatcher(pairs[i]+"="+pairs[i+1], false, false, true); r.err != nil {
+ return r
+ }
+ }
+
+ return r
+}
+
+// Schemes --------------------------------------------------------------------
+
+// schemeMatcher matches the request against URL schemes.
+type schemeMatcher []string
+
+func (m schemeMatcher) Match(r *http.Request, match *RouteMatch) bool {
+ return matchInArray(m, r.URL.Scheme)
+}
+
+// Schemes adds a matcher for URL schemes.
+// It accepts a sequence of schemes to be matched, e.g.: "http", "https".
+func (r *Route) Schemes(schemes ...string) *Route {
+ for k, v := range schemes {
+ schemes[k] = strings.ToLower(v)
+ }
+ return r.addMatcher(schemeMatcher(schemes))
+}
+
+// BuildVarsFunc --------------------------------------------------------------
+
+// BuildVarsFunc is the function signature used by custom build variable
+// functions (which can modify route variables before a route's URL is built).
+type BuildVarsFunc func(map[string]string) map[string]string
+
+// BuildVarsFunc adds a custom function to be used to modify build variables
+// before a route's URL is built.
+func (r *Route) BuildVarsFunc(f BuildVarsFunc) *Route {
+ r.buildVarsFunc = f
+ return r
+}
+
+// Subrouter ------------------------------------------------------------------
+
+// Subrouter creates a subrouter for the route.
+//
+// It will test the inner routes only if the parent route matched. For example:
+//
+// r := mux.NewRouter()
+// s := r.Host("www.example.com").Subrouter()
+// s.HandleFunc("/products/", ProductsHandler)
+// s.HandleFunc("/products/{key}", ProductHandler)
+// s.HandleFunc("/articles/{category}/{id:[0-9]+}"), ArticleHandler)
+//
+// Here, the routes registered in the subrouter won't be tested if the host
+// doesn't match.
+func (r *Route) Subrouter() *Router {
+ router := &Router{parent: r, strictSlash: r.strictSlash}
+ r.addMatcher(router)
+ return router
+}
+
+// ----------------------------------------------------------------------------
+// URL building
+// ----------------------------------------------------------------------------
+
+// URL builds a URL for the route.
+//
+// It accepts a sequence of key/value pairs for the route variables. For
+// example, given this route:
+//
+// r := mux.NewRouter()
+// r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+// Name("article")
+//
+// ...a URL for it can be built using:
+//
+// url, err := r.Get("article").URL("category", "technology", "id", "42")
+//
+// ...which will return an url.URL with the following path:
+//
+// "/articles/technology/42"
+//
+// This also works for host variables:
+//
+// r := mux.NewRouter()
+// r.Host("{subdomain}.domain.com").
+// HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+// Name("article")
+//
+// // url.String() will be "http://news.domain.com/articles/technology/42"
+// url, err := r.Get("article").URL("subdomain", "news",
+// "category", "technology",
+// "id", "42")
+//
+// All variables defined in the route are required, and their values must
+// conform to the corresponding patterns.
+func (r *Route) URL(pairs ...string) (*url.URL, error) {
+ if r.err != nil {
+ return nil, r.err
+ }
+ if r.regexp == nil {
+ return nil, errors.New("mux: route doesn't have a host or path")
+ }
+ values, err := r.prepareVars(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ var scheme, host, path string
+ if r.regexp.host != nil {
+ // Set a default scheme.
+ scheme = "http"
+ if host, err = r.regexp.host.url(values); err != nil {
+ return nil, err
+ }
+ }
+ if r.regexp.path != nil {
+ if path, err = r.regexp.path.url(values); err != nil {
+ return nil, err
+ }
+ }
+ return &url.URL{
+ Scheme: scheme,
+ Host: host,
+ Path: path,
+ }, nil
+}
+
+// URLHost builds the host part of the URL for a route. See Route.URL().
+//
+// The route must have a host defined.
+func (r *Route) URLHost(pairs ...string) (*url.URL, error) {
+ if r.err != nil {
+ return nil, r.err
+ }
+ if r.regexp == nil || r.regexp.host == nil {
+ return nil, errors.New("mux: route doesn't have a host")
+ }
+ values, err := r.prepareVars(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ host, err := r.regexp.host.url(values)
+ if err != nil {
+ return nil, err
+ }
+ return &url.URL{
+ Scheme: "http",
+ Host: host,
+ }, nil
+}
+
+// URLPath builds the path part of the URL for a route. See Route.URL().
+//
+// The route must have a path defined.
+func (r *Route) URLPath(pairs ...string) (*url.URL, error) {
+ if r.err != nil {
+ return nil, r.err
+ }
+ if r.regexp == nil || r.regexp.path == nil {
+ return nil, errors.New("mux: route doesn't have a path")
+ }
+ values, err := r.prepareVars(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ path, err := r.regexp.path.url(values)
+ if err != nil {
+ return nil, err
+ }
+ return &url.URL{
+ Path: path,
+ }, nil
+}
+
+// GetPathTemplate returns the template used to build the
+// route match.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a path.
+func (r *Route) GetPathTemplate() (string, error) {
+ if r.err != nil {
+ return "", r.err
+ }
+ if r.regexp == nil || r.regexp.path == nil {
+ return "", errors.New("mux: route doesn't have a path")
+ }
+ return r.regexp.path.template, nil
+}
+
+// GetHostTemplate returns the template used to build the
+// route match.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a host.
+func (r *Route) GetHostTemplate() (string, error) {
+ if r.err != nil {
+ return "", r.err
+ }
+ if r.regexp == nil || r.regexp.host == nil {
+ return "", errors.New("mux: route doesn't have a host")
+ }
+ return r.regexp.host.template, nil
+}
+
+// prepareVars converts the route variable pairs into a map. If the route has a
+// BuildVarsFunc, it is invoked.
+func (r *Route) prepareVars(pairs ...string) (map[string]string, error) {
+ m, err := mapFromPairsToString(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ return r.buildVars(m), nil
+}
+
+func (r *Route) buildVars(m map[string]string) map[string]string {
+ if r.parent != nil {
+ m = r.parent.buildVars(m)
+ }
+ if r.buildVarsFunc != nil {
+ m = r.buildVarsFunc(m)
+ }
+ return m
+}
+
+// ----------------------------------------------------------------------------
+// parentRoute
+// ----------------------------------------------------------------------------
+
+// parentRoute allows routes to know about parent host and path definitions.
+type parentRoute interface {
+ getNamedRoutes() map[string]*Route
+ getRegexpGroup() *routeRegexpGroup
+ buildVars(map[string]string) map[string]string
+}
+
+// getNamedRoutes returns the map where named routes are registered.
+func (r *Route) getNamedRoutes() map[string]*Route {
+ if r.parent == nil {
+ // During tests router is not always set.
+ r.parent = NewRouter()
+ }
+ return r.parent.getNamedRoutes()
+}
+
+// getRegexpGroup returns regexp definitions from this route.
+func (r *Route) getRegexpGroup() *routeRegexpGroup {
+ if r.regexp == nil {
+ if r.parent == nil {
+ // During tests router is not always set.
+ r.parent = NewRouter()
+ }
+ regexp := r.parent.getRegexpGroup()
+ if regexp == nil {
+ r.regexp = new(routeRegexpGroup)
+ } else {
+ // Copy.
+ r.regexp = &routeRegexpGroup{
+ host: regexp.host,
+ path: regexp.path,
+ queries: regexp.queries,
+ }
+ }
+ }
+ return r.regexp
+}
diff --git a/config-generator/vendor/github.com/kelseyhightower/envconfig/.travis.yml b/config-generator/vendor/github.com/kelseyhightower/envconfig/.travis.yml
new file mode 100644
index 0000000..e15301a
--- /dev/null
+++ b/config-generator/vendor/github.com/kelseyhightower/envconfig/.travis.yml
@@ -0,0 +1,7 @@
+language: go
+
+go:
+ - 1.4
+ - 1.5
+ - 1.6
+ - tip
diff --git a/config-generator/vendor/github.com/kelseyhightower/envconfig/LICENSE b/config-generator/vendor/github.com/kelseyhightower/envconfig/LICENSE
new file mode 100644
index 0000000..4bfa7a8
--- /dev/null
+++ b/config-generator/vendor/github.com/kelseyhightower/envconfig/LICENSE
@@ -0,0 +1,19 @@
+Copyright (c) 2013 Kelsey Hightower
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+of the Software, and to permit persons to whom the Software is furnished to do
+so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
diff --git a/config-generator/vendor/github.com/kelseyhightower/envconfig/MAINTAINERS b/config-generator/vendor/github.com/kelseyhightower/envconfig/MAINTAINERS
new file mode 100644
index 0000000..6527a9f
--- /dev/null
+++ b/config-generator/vendor/github.com/kelseyhightower/envconfig/MAINTAINERS
@@ -0,0 +1,2 @@
+Kelsey Hightower kelsey.hightower@gmail.com github.com/kelseyhightower
+Travis Parker travis.parker@gmail.com github.com/teepark
diff --git a/config-generator/vendor/github.com/kelseyhightower/envconfig/README.md b/config-generator/vendor/github.com/kelseyhightower/envconfig/README.md
new file mode 100644
index 0000000..dd516a2
--- /dev/null
+++ b/config-generator/vendor/github.com/kelseyhightower/envconfig/README.md
@@ -0,0 +1,161 @@
+# envconfig
+
+[](https://travis-ci.org/kelseyhightower/envconfig)
+
+```Go
+import "github.com/kelseyhightower/envconfig"
+```
+
+## Documentation
+
+See [godoc](http://godoc.org/github.com/kelseyhightower/envconfig)
+
+## Usage
+
+Set some environment variables:
+
+```Bash
+export MYAPP_DEBUG=false
+export MYAPP_PORT=8080
+export MYAPP_USER=Kelsey
+export MYAPP_RATE="0.5"
+export MYAPP_TIMEOUT="3m"
+export MYAPP_USERS="rob,ken,robert"
+```
+
+Write some code:
+
+```Go
+package main
+
+import (
+ "fmt"
+ "log"
+ "time"
+
+ "github.com/kelseyhightower/envconfig"
+)
+
+type Specification struct {
+ Debug bool
+ Port int
+ User string
+ Users []string
+ Rate float32
+ Timeout time.Duration
+}
+
+func main() {
+ var s Specification
+ err := envconfig.Process("myapp", &s)
+ if err != nil {
+ log.Fatal(err.Error())
+ }
+ format := "Debug: %v\nPort: %d\nUser: %s\nRate: %f\nTimeout: %s\n"
+ _, err = fmt.Printf(format, s.Debug, s.Port, s.User, s.Rate)
+ if err != nil {
+ log.Fatal(err.Error())
+ }
+
+ fmt.Println("Users:")
+ for _, u := range s.Users {
+ fmt.Printf(" %s\n", u)
+ }
+}
+```
+
+Results:
+
+```Bash
+Debug: false
+Port: 8080
+User: Kelsey
+Rate: 0.500000
+Timeout: 3m0s
+Users:
+ rob
+ ken
+ robert
+```
+
+## Struct Tag Support
+
+Envconfig supports the use of struct tags to specify alternate, default, and required
+environment variables.
+
+For example, consider the following struct:
+
+```Go
+type Specification struct {
+ MultiWordVar string `envconfig:"multi_word_var"`
+ DefaultVar string `default:"foobar"`
+ RequiredVar string `required:"true"`
+ IgnoredVar string `ignored:"true"`
+}
+```
+
+Envconfig will process value for `MultiWordVar` by populating it with the
+value for `MYAPP_MULTI_WORD_VAR`.
+
+```Bash
+export MYAPP_MULTI_WORD_VAR="this will be the value"
+
+# export MYAPP_MULTIWORDVAR="and this will not"
+```
+
+If envconfig can't find an environment variable value for `MYAPP_DEFAULTVAR`,
+it will populate it with "foobar" as a default value.
+
+If envconfig can't find an environment variable value for `MYAPP_REQUIREDVAR`,
+it will return an error when asked to process the struct.
+
+If envconfig can't find an environment variable in the form `PREFIX_MYVAR`, and there
+is a struct tag defined, it will try to populate your variable with an environment
+variable that directly matches the envconfig tag in your struct definition:
+
+```shell
+export SERVICE_HOST=127.0.0.1
+export MYAPP_DEBUG=true
+```
+```Go
+type Specification struct {
+ ServiceHost string `envconfig:"SERVICE_HOST"`
+ Debug bool
+}
+```
+
+Envconfig won't process a field with the "ignored" tag set to "true", even if a corresponding
+environment variable is set.
+
+## Supported Struct Field Types
+
+envconfig supports supports these struct field types:
+
+ * string
+ * int8, int16, int32, int64
+ * bool
+ * float32, float64
+
+Embedded structs using these fields are also supported.
+
+## Custom Decoders
+
+Any field whose type (or pointer-to-type) implements `envconfig.Decoder` can
+control its own deserialization:
+
+```Bash
+export DNS_SERVER=8.8.8.8
+```
+
+```Go
+type IPDecoder net.IP
+
+func (ipd *IPDecoder) Decode(value string) error {
+ *ipd = IPDecoder(net.ParseIP(value))
+ return nil
+}
+
+type DNSConfig struct {
+ Address IPDecoder `envconfig:"DNS_SERVER"`
+}
+```
diff --git a/config-generator/vendor/github.com/kelseyhightower/envconfig/doc.go b/config-generator/vendor/github.com/kelseyhightower/envconfig/doc.go
new file mode 100644
index 0000000..f28561c
--- /dev/null
+++ b/config-generator/vendor/github.com/kelseyhightower/envconfig/doc.go
@@ -0,0 +1,8 @@
+// Copyright (c) 2013 Kelsey Hightower. All rights reserved.
+// Use of this source code is governed by the MIT License that can be found in
+// the LICENSE file.
+
+// Package envconfig implements decoding of environment variables based on a user
+// defined specification. A typical use is using environment variables for
+// configuration settings.
+package envconfig
diff --git a/config-generator/vendor/github.com/kelseyhightower/envconfig/envconfig.go b/config-generator/vendor/github.com/kelseyhightower/envconfig/envconfig.go
new file mode 100644
index 0000000..1daf389
--- /dev/null
+++ b/config-generator/vendor/github.com/kelseyhightower/envconfig/envconfig.go
@@ -0,0 +1,201 @@
+// Copyright (c) 2013 Kelsey Hightower. All rights reserved.
+// Use of this source code is governed by the MIT License that can be found in
+// the LICENSE file.
+
+package envconfig
+
+import (
+ "errors"
+ "fmt"
+ "reflect"
+ "strconv"
+ "strings"
+ "syscall"
+ "time"
+)
+
+// ErrInvalidSpecification indicates that a specification is of the wrong type.
+var ErrInvalidSpecification = errors.New("specification must be a struct pointer")
+
+// A ParseError occurs when an environment variable cannot be converted to
+// the type required by a struct field during assignment.
+type ParseError struct {
+ KeyName string
+ FieldName string
+ TypeName string
+ Value string
+}
+
+// A Decoder is a type that knows how to de-serialize environment variables
+// into itself.
+type Decoder interface {
+ Decode(value string) error
+}
+
+func (e *ParseError) Error() string {
+ return fmt.Sprintf("envconfig.Process: assigning %[1]s to %[2]s: converting '%[3]s' to type %[4]s", e.KeyName, e.FieldName, e.Value, e.TypeName)
+}
+
+// Process populates the specified struct based on environment variables
+func Process(prefix string, spec interface{}) error {
+ s := reflect.ValueOf(spec)
+
+ if s.Kind() != reflect.Ptr {
+ return ErrInvalidSpecification
+ }
+ s = s.Elem()
+ if s.Kind() != reflect.Struct {
+ return ErrInvalidSpecification
+ }
+ typeOfSpec := s.Type()
+ for i := 0; i < s.NumField(); i++ {
+ f := s.Field(i)
+ if !f.CanSet() || typeOfSpec.Field(i).Tag.Get("ignored") == "true" {
+ continue
+ }
+
+ if typeOfSpec.Field(i).Anonymous && f.Kind() == reflect.Struct {
+ embeddedPtr := f.Addr().Interface()
+ if err := Process(prefix, embeddedPtr); err != nil {
+ return err
+ }
+ f.Set(reflect.ValueOf(embeddedPtr).Elem())
+ }
+
+ alt := typeOfSpec.Field(i).Tag.Get("envconfig")
+ fieldName := typeOfSpec.Field(i).Name
+ if alt != "" {
+ fieldName = alt
+ }
+ key := strings.ToUpper(fmt.Sprintf("%s_%s", prefix, fieldName))
+ // `os.Getenv` cannot differentiate between an explicitly set empty value
+ // and an unset value. `os.LookupEnv` is preferred to `syscall.Getenv`,
+ // but it is only available in go1.5 or newer.
+ value, ok := syscall.Getenv(key)
+ if !ok && alt != "" {
+ key := strings.ToUpper(fieldName)
+ value, ok = syscall.Getenv(key)
+ }
+
+ def := typeOfSpec.Field(i).Tag.Get("default")
+ if def != "" && !ok {
+ value = def
+ }
+
+ req := typeOfSpec.Field(i).Tag.Get("required")
+ if !ok && def == "" {
+ if req == "true" {
+ return fmt.Errorf("required key %s missing value", key)
+ }
+ continue
+ }
+
+ err := processField(value, f)
+ if err != nil {
+ return &ParseError{
+ KeyName: key,
+ FieldName: fieldName,
+ TypeName: f.Type().String(),
+ Value: value,
+ }
+ }
+ }
+ return nil
+}
+
+// MustProcess is the same as Process but panics if an error occurs
+func MustProcess(prefix string, spec interface{}) {
+ if err := Process(prefix, spec); err != nil {
+ panic(err)
+ }
+}
+
+func processField(value string, field reflect.Value) error {
+ typ := field.Type()
+
+ decoder := decoderFrom(field)
+ if decoder != nil {
+ return decoder.Decode(value)
+ }
+
+ if typ.Kind() == reflect.Ptr {
+ typ = typ.Elem()
+ if field.IsNil() {
+ field.Set(reflect.New(typ))
+ }
+ field = field.Elem()
+ }
+
+ switch typ.Kind() {
+ case reflect.String:
+ field.SetString(value)
+ case reflect.Int, reflect.Int8, reflect.Int16, reflect.Int32, reflect.Int64:
+ var (
+ val int64
+ err error
+ )
+ if field.Kind() == reflect.Int64 && typ.PkgPath() == "time" && typ.Name() == "Duration" {
+ var d time.Duration
+ d, err = time.ParseDuration(value)
+ val = int64(d)
+ } else {
+ val, err = strconv.ParseInt(value, 0, typ.Bits())
+ }
+ if err != nil {
+ return err
+ }
+
+ field.SetInt(val)
+ case reflect.Uint, reflect.Uint8, reflect.Uint16, reflect.Uint32, reflect.Uint64:
+ val, err := strconv.ParseUint(value, 0, typ.Bits())
+ if err != nil {
+ return err
+ }
+ field.SetUint(val)
+ case reflect.Bool:
+ val, err := strconv.ParseBool(value)
+ if err != nil {
+ return err
+ }
+ field.SetBool(val)
+ case reflect.Float32, reflect.Float64:
+ val, err := strconv.ParseFloat(value, typ.Bits())
+ if err != nil {
+ return err
+ }
+ field.SetFloat(val)
+ case reflect.Slice:
+ vals := strings.Split(value, ",")
+ sl := reflect.MakeSlice(typ, len(vals), len(vals))
+ for i, val := range vals {
+ err := processField(val, sl.Index(i))
+ if err != nil {
+ return err
+ }
+ }
+ field.Set(sl)
+ }
+
+ return nil
+}
+
+func decoderFrom(field reflect.Value) Decoder {
+ if field.CanInterface() {
+ dec, ok := field.Interface().(Decoder)
+ if ok {
+ return dec
+ }
+ }
+
+ // also check if pointer-to-type implements Decoder,
+ // and we can get a pointer to our field
+ if field.CanAddr() {
+ field = field.Addr()
+ dec, ok := field.Interface().(Decoder)
+ if ok {
+ return dec
+ }
+ }
+
+ return nil
+}