check point physical quickstart
diff --git a/QUICKSTART_PHYSICAL.md b/QUICKSTART_PHYSICAL.md
new file mode 100644
index 0000000..6d12583
--- /dev/null
+++ b/QUICKSTART_PHYSICAL.md
@@ -0,0 +1,54 @@
+# Quick Start for Physical CORD POD
+This guide is meant to enable the user to utilize the artifacts of this
+repository to to deploy CORD on to a physical hardware rack. The artifacts in
+this repository will deploy CORD against a standard physical rack wired
+according to the **best practices** as defined in this document.
+
+## Physical configuration
+
+
+As depicted in the diagram above the base model for the CORD POD deployment
+contains:
+- 4 OF switches comprising the leaf - spine fabric utilized for data traffic
+- 4 compute nodes with with 2 40G ports and 2 1G ports
+- 1 top of rack (TOR) switch utilized for management communications
+
+The best practices in terms of connecting the components of the CORD POD
+include:
+- Leaf nodes are connected to the spines nodes starting at the highest port
+number on the leaf.
+- For a given leaf node, its connection to the spine nodes terminate on the
+same port number on each spine.
+- Leaf *n* connections to spine nodes terminate at port *n* on each spine
+node.
+- Leaf spine switches are connected into the management TOR starting from the
+highest port number.
+- Compute nodes 40G interfaces are named *eth0* and *eth1*.
+- Compute nodes 10G interfaces are named *eth2* and *eth3*.
+- Compute node *n* is connected to the management TOR switch on port *n*,
+egressing from the compute node at *eth2*.
+- Compute node *n* is connected to its primary leaf, egressing at *eth0* and terminating on the leaf at port *n*.
+- Compute node *n* is connected to its secondary leaf, egressing at *eth1* and
+terminating on the leaf at port *n*.
+- *eth3* on the head node is the uplink from the POD to the Internet.
+
+The following assumptions are made about the phyical CORD POD being deployed:
+- The leaf - spine switchs are Accton 6712s
+- The compute nodes are using 40G Intel NIC cards
+- The compute node that is to be designated the *head node* has
+Ubuntu 14.04 LTS installed.
+
+## Bootstrapping the Head Node
+The head node is the key to the physical deployment of a CORD POD. The
+automated deployment of the physical POD is designed such that the head node is
+manually deployed, with the aid of automation tools, such as Ansible and from
+this head node the rest of the POD deployment is automated.
+
+The head node can be deployed either from a node outside the CORD POD or by
+deploying from the head the head node. The procedure in each scenario is
+slightly different because during the bootstrapping of the head node it is
+possible that the interfaces needed to be renamed and the system to be
+rebooted.
+
+### Bootstrapping the Head Node from Outside the POD
+To deploy the head node it is assumed that the node is reachable from outside
diff --git a/doc/images/physical.graffle b/doc/images/physical.graffle
new file mode 100644
index 0000000..0cecc95
--- /dev/null
+++ b/doc/images/physical.graffle
Binary files differ
diff --git a/doc/images/physical.png b/doc/images/physical.png
new file mode 100644
index 0000000..7584944
--- /dev/null
+++ b/doc/images/physical.png
Binary files differ
