# Copyright 2019-present Open Networking Foundation
#
# SPDX-License-Identifier: Apache-2.0

# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
# Modified for SEBA in a Box by Open Networking Foundation

# To quickly see what options are active in this file, use this command:
#   egrep -v '#|^ *$' /etc/ppp/pppoe-options

# Use the modem control lines.  On Ultrix, this option implies hardware
# flow control, as for the crtscts option.  (This option is not fully
# implemented.)
modem

# If this option is given, pppd will send an LCP echo-request frame to the
# peer every n seconds. Normally the peer should respond to the echo-request
# by sending an echo-reply. This option can be used with the
# lcp-echo-failure option to detect that the peer is no longer connected.
lcp-echo-interval 5

# If this option is given, pppd will presume the peer to be dead if n
# LCP echo-requests are sent without receiving a valid LCP echo-reply.
# If this happens, pppd will terminate the connection.  Use of this
# option requires a non-zero value for the lcp-echo-interval parameter.
# This option can be used to enable pppd to terminate after the physical
# connection has been broken (e.g., the modem has hung up) in
# situations where no hardware modem control lines are available.
lcp-echo-failure 12

# Disable the IPXCP and IPX protocols.
noipx

# Disable negotiation of Van Jacobson style IP header compression (use
# default, i.e. no compression).
-vj

# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
# Two Servers can be remotely configured
ms-dns 8.8.8.8
ms-dns 8.8.4.4

# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
# notation (e.g. 255.255.255.0).
netmask 255.255.255.0

# Other options
asyncmap 0
crtscts
lock
hide-password
require-chap
nobsdcomp
noccp
novj

# Increase debugging level (same as -d).  If this option is given, pppd
# will log the contents of all control packets sent or received in a
# readable form.  The packets are logged through syslog with facility
# daemon and level debug.
debug
logfile /var/log/pppoe-server-log