
{#
Copyright 2017-present Open Networking Foundation

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
#}


[DEFAULT]

#
# From keystone
#

# A "shared secret" that can be used to bootstrap Keystone. This "token" does
# not represent a user, and carries no explicit authorization. If set to
# `None`, the value is ignored and the `admin_token` log in mechanism is
# effectively disabled. To completely disable `admin_token` in production
# (highly recommended), remove AdminTokenAuthMiddleware from your paste
# application pipelines (for example, in keystone-paste.ini). (string value)
#admin_token = <None>
admin_token = ADMIN_TOKEN

# The base public endpoint URL for Keystone that is advertised to clients
# (NOTE: this does NOT affect how Keystone listens for connections). Defaults
# to the base host URL of the request. E.g. a request to
# http://server:5000/v3/users will default to http://server:5000. You should
# only need to set this value if the base URL contains a path (e.g. /prefix/v3)
# or the endpoint should be found on a different server. (string value)
#public_endpoint = <None>

# The base admin endpoint URL for Keystone that is advertised to clients (NOTE:
# this does NOT affect how Keystone listens for connections). Defaults to the
# base host URL of the request. E.g. a request to http://server:35357/v3/users
# will default to http://server:35357. You should only need to set this value
# if the base URL contains a path (e.g. /prefix/v3) or the endpoint should be
# found on a different server. (string value)
#admin_endpoint = <None>

# Maximum depth of the project hierarchy, excluding the project acting as a
# domain at the top of the hierarchy. WARNING: setting it to a large value may
# adversely impact  performance. (integer value)
#max_project_tree_depth = 5

# Limit the sizes of user & project ID/names. (integer value)
#max_param_size = 64

# Similar to max_param_size, but provides an exception for token values.
# (integer value)
#max_token_size = 8192

# Similar to the member_role_name option, this represents the default role ID
# used to associate users with their default projects in the v2 API. This will
# be used as the explicit role where one is not specified by the v2 API.
# (string value)
#member_role_id = 9fe2ff9ee4384b1894a90878d3e92bab

# This is the role name used in combination with the member_role_id option; see
# that option for more detail. (string value)
#member_role_name = _member_

# The value passed as the keyword "rounds" to passlib's encrypt method.
# (integer value)
# Minimum value: 1000
# Maximum value: 100000
#crypt_strength = 10000

# The maximum number of entities that will be returned in a collection, with no
# limit set by default. This global limit may be then overridden for a specific
# driver, by specifying a list_limit in the appropriate section (e.g.
# [assignment]). (integer value)
#list_limit = <None>

# Set this to false if you want to enable the ability for user, group and
# project entities to be moved between domains by updating their domain_id.
# Allowing such movement is not recommended if the scope of a domain admin is
# being restricted by use of an appropriate policy file (see
# policy.v3cloudsample as an example). This ability is deprecated and will be
# removed in a future release. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#domain_id_immutable = true

# If set to true, strict password length checking is performed for password
# manipulation. If a password exceeds the maximum length, the operation will
# fail with an HTTP 403 Forbidden error. If set to false, passwords are
# automatically truncated to the maximum length. (boolean value)
#strict_password_check = false

# The HTTP header used to determine the scheme for the original request, even
# if it was removed by an SSL terminating proxy. (string value)
#secure_proxy_ssl_header = HTTP_X_FORWARDED_PROTO

# If set to true the server will return information in the response that may
# allow an unauthenticated or authenticated user to get more information than
# normal, such as why authentication failed. This may be useful for debugging
# but is insecure. (boolean value)
#insecure_debug = false

#
# From keystone.notifications
#

# Default publisher_id for outgoing notifications (string value)
#default_publisher_id = <None>

# Define the notification format for Identity Service events. A "basic"
# notification has information about the resource being operated on. A "cadf"
# notification has the same information, as well as information about the
# initiator of the event. (string value)
# Allowed values: basic, cadf
#notification_format = basic

# Define the notification options to opt-out from. The value expected is:
# identity.<resource_type>.<operation>. This field can be set multiple times in
# order to add more notifications to opt-out from. For example:
#  notification_opt_out=identity.user.created
#  notification_opt_out=identity.authenticate.success (multi valued)
#notification_opt_out =

#
# From oslo.log
#

# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
#debug = false

# If set to false, the logging level will be set to WARNING instead of the
# default INFO level. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#verbose = true

# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, logging_context_format_string). (string value)
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>

# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S

# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>

# (Optional) The base directory used for relative log_file  paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>
log_dir = /var/log/keystone

# Uses logging handler designed to watch file system. When log file is moved or
# removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and
# Linux platform is used. This option is ignored if log_config_append is set.
# (boolean value)
#watch_log_file = false

# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append
# is set. (boolean value)
#use_syslog = false

# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER

# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = true

# Format string to use for log messages with context. (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

# Format string to use for log messages when context is undefined. (string
# value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

# Additional data to append to log message when logging level for the message
# is DEBUG. (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

# Prefix each line of exception output with this format. (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. (string value)
#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO

# Enables or disables publication of error events. (boolean value)
#publish_errors = false

# The format for an instance that is passed with the log message. (string
# value)
#instance_format = "[instance: %(uuid)s] "

# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "

# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false

#
# From oslo.messaging
#

# Size of RPC connection pool. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
#rpc_conn_pool_size = 30

# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address. (string value)
#rpc_zmq_bind_address = *

# MatchMaker driver. (string value)
# Allowed values: redis, dummy
#rpc_zmq_matchmaker = redis

# Type of concurrency used. Either "native" or "eventlet" (string value)
#rpc_zmq_concurrency = eventlet

# Number of ZeroMQ contexts, defaults to 1. (integer value)
#rpc_zmq_contexts = 1

# Maximum number of ingress messages to locally buffer per topic. Default is
# unlimited. (integer value)
#rpc_zmq_topic_backlog = <None>

# Directory for holding IPC sockets. (string value)
#rpc_zmq_ipc_dir = /var/run/openstack

# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
# "host" option, if running Nova. (string value)
#rpc_zmq_host = localhost

# Seconds to wait before a cast expires (TTL). The default value of -1
# specifies an infinite linger period. The value of 0 specifies no linger
# period. Pending messages shall be discarded immediately when the socket is
# closed. Only supported by impl_zmq. (integer value)
#rpc_cast_timeout = -1

# The default number of seconds that poll should wait. Poll raises timeout
# exception when timeout expired. (integer value)
#rpc_poll_timeout = 1

# Expiration timeout in seconds of a name service record about existing target
# ( < 0 means no timeout). (integer value)
#zmq_target_expire = 120

# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
# value)
#use_pub_sub = true

# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
#rpc_zmq_min_port = 49152

# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
#rpc_zmq_max_port = 65536

# Number of retries to find free port number before fail with ZMQBindError.
# (integer value)
#rpc_zmq_bind_port_retries = 100

# Size of executor thread pool. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64

# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60

# A URL representing the messaging driver to use and its full configuration. If
# not set, we fall back to the rpc_backend option and driver specific
# configuration. (string value)
#transport_url = <None>

# The messaging driver to use, defaults to rabbit. Other drivers include amqp
# and zmq. (string value)
#rpc_backend = rabbit

# The default exchange under which topics are scoped. May be overridden by an
# exchange name specified in the transport_url option. (string value)
#control_exchange = keystone

#
# From oslo.service.service
#

# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
# <start>:<end>, where 0 results in listening on a random tcp port number;
# <port> results in listening on the specified port number (and not enabling
# backdoor if that port is in use); and <start>:<end> results in listening on
# the smallest unused port number within the specified range of port numbers.
# The chosen port is displayed in the service's log file. (string value)
#backdoor_port = <None>

# Enable eventlet backdoor, using the provided path as a unix socket that can
# receive connections. This option is mutually exclusive with 'backdoor_port'
# in that only one should be provided. If both are provided then the existence
# of this option overrides the usage of that option. (string value)
#backdoor_socket = <None>

# Enables or disables logging values of all registered options when starting a
# service (at DEBUG level). (boolean value)
#log_options = true

# Specify a timeout after which a gracefully shutdown server will exit. Zero
# value means endless wait. (integer value)
#graceful_shutdown_timeout = 60


[assignment]

#
# From keystone
#

# Entrypoint for the assignment backend driver in the keystone.assignment
# namespace. Only an SQL driver is supplied. If an assignment driver is not
# specified, the identity driver will choose the assignment driver (driver
# selection based on `[identity]/driver` option is deprecated and will be
# removed in the "O" release). (string value)
#driver = <None>

# A list of role names which are prohibited from being an implied role. (list
# value)
#prohibited_implied_role = admin


[auth]

#
# From keystone
#

# Allowed authentication methods. (list value)
#methods = external,password,token,oauth1

# Entrypoint for the password auth plugin module in the keystone.auth.password
# namespace. (string value)
#password = <None>

# Entrypoint for the token auth plugin module in the keystone.auth.token
# namespace. (string value)
#token = <None>

# Entrypoint for the external (REMOTE_USER) auth plugin module in the
# keystone.auth.external namespace. Supplied drivers are DefaultDomain and
# Domain. The default driver is DefaultDomain. (string value)
#external = <None>

# Entrypoint for the oAuth1.0 auth plugin module in the keystone.auth.oauth1
# namespace. (string value)
#oauth1 = <None>


[cache]

#
# From oslo.cache
#

# Prefix for building the configuration dictionary for the cache region. This
# should not need to be changed unless there is another dogpile.cache region
# with the same configuration name. (string value)
#config_prefix = cache.oslo

# Default TTL, in seconds, for any cached item in the dogpile.cache region.
# This applies to any cached method that doesn't have an explicit cache
# expiration time defined for it. (integer value)
#expiration_time = 600

# Dogpile.cache backend module. It is recommended that Memcache with pooling
# (oslo_cache.memcache_pool) or Redis (dogpile.cache.redis) be used in
# production deployments.  Small workloads (single process) like devstack can
# use the dogpile.cache.memory backend. (string value)
#backend = dogpile.cache.null

# Arguments supplied to the backend module. Specify this option once per
# argument to be passed to the dogpile.cache backend. Example format:
# "<argname>:<value>". (multi valued)
#backend_argument =

# Proxy classes to import that will affect the way the dogpile.cache backend
# functions. See the dogpile.cache documentation on changing-backend-behavior.
# (list value)
#proxies =

# Global toggle for caching. (boolean value)
#enabled = false

# Extra debugging from the cache backend (cache keys, get/set/delete/etc
# calls). This is only really useful if you need to see the specific cache-
# backend get/set/delete calls with the keys/values.  Typically this should be
# left set to false. (boolean value)
#debug_cache_backend = false

# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
# oslo_cache.memcache_pool backends only). (list value)
#memcache_servers = localhost:11211

# Number of seconds memcached server is considered dead before it is tried
# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
# (integer value)
#memcache_dead_retry = 300

# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
# oslo_cache.memcache_pool backends only). (integer value)
#memcache_socket_timeout = 3

# Max total number of open connections to every memcached server.
# (oslo_cache.memcache_pool backend only). (integer value)
#memcache_pool_maxsize = 10

# Number of seconds a connection to memcached is held unused in the pool before
# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
#memcache_pool_unused_timeout = 60

# Number of seconds that an operation will wait to get a memcache client
# connection. (integer value)
#memcache_pool_connection_get_timeout = 10


[catalog]

#
# From keystone
#

# Catalog template file name for use with the template catalog backend. (string
# value)
#template_file = default_catalog.templates

# Entrypoint for the catalog backend driver in the keystone.catalog namespace.
# Supplied drivers are kvs, sql, templated, and endpoint_filter.sql (string
# value)
#driver = sql

# Toggle for catalog caching. This has no effect unless global caching is
# enabled. (boolean value)
#caching = true

# Time to cache catalog data (in seconds). This has no effect unless global and
# catalog caching are enabled. (integer value)
#cache_time = <None>

# Maximum number of entities that will be returned in a catalog collection.
# (integer value)
#list_limit = <None>


[cors]

#
# From oslo.middleware
#

# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. (list value)
#allowed_origin = <None>

# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true

# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token

# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600

# Indicate which methods can be used during the actual request. (list value)
#allow_methods = GET,PUT,POST,DELETE,PATCH

# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name


[cors.subdomain]

#
# From oslo.middleware
#

# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. (list value)
#allowed_origin = <None>

# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true

# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token

# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600

# Indicate which methods can be used during the actual request. (list value)
#allow_methods = GET,PUT,POST,DELETE,PATCH

# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name


[credential]

#
# From keystone
#

# Entrypoint for the credential backend driver in the keystone.credential
# namespace. (string value)
#driver = sql


[database]

#
# From oslo.db
#

# The file name to use with SQLite. (string value)
# Deprecated group/name - [DEFAULT]/sqlite_db
#sqlite_db = oslo.sqlite

# If True, SQLite uses synchronous mode. (boolean value)
# Deprecated group/name - [DEFAULT]/sqlite_synchronous
#sqlite_synchronous = true

# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy

# The SQLAlchemy connection string to use to connect to the database. (string
# value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>
#connection = sqlite:////var/lib/keystone/keystone.db

connection = mysql+pymysql://keystone:password@localhost/keystone

# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>

# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set
# by the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL

# Timeout before idle SQL connections are reaped. (integer value)
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
#idle_timeout = 3600

# Minimum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
# Deprecated group/name - [DATABASE]/sql_min_pool_size
#min_pool_size = 1

# Maximum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
#max_pool_size = <None>

# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10

# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10

# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50

# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0

# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false

# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>

# Enable the experimental use of database reconnect on connection lost.
# (boolean value)
#use_db_reconnect = false

# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1

# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true

# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10

# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20


[domain_config]

#
# From keystone
#

# Entrypoint for the domain config backend driver in the
# keystone.resource.domain_config namespace. (string value)
#driver = sql

# Toggle for domain config caching. This has no effect unless global caching is
# enabled. (boolean value)
#caching = true

# TTL (in seconds) to cache domain config data. This has no effect unless
# domain config caching is enabled. (integer value)
#cache_time = 300


[endpoint_filter]

#
# From keystone
#

# Entrypoint for the endpoint filter backend driver in the
# keystone.endpoint_filter namespace. (string value)
#driver = sql

# Toggle to return all active endpoints if no filter exists. (boolean value)
#return_all_endpoints_if_no_filter = true


[endpoint_policy]

#
# From keystone
#

# Enable endpoint_policy functionality. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The option to enable the OS-ENDPOINT-POLICY extension has been
# deprecated in the M release and will be removed in the O release. The OS-
# ENDPOINT-POLICY extension will be enabled by default.
#enabled = true

# Entrypoint for the endpoint policy backend driver in the
# keystone.endpoint_policy namespace. (string value)
#driver = sql


[eventlet_server]

#
# From keystone
#

# The number of worker processes to serve the public eventlet application.
# Defaults to number of CPUs (minimum of 2). (integer value)
# Deprecated group/name - [DEFAULT]/public_workers
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#public_workers = <None>

# The number of worker processes to serve the admin eventlet application.
# Defaults to number of CPUs (minimum of 2). (integer value)
# Deprecated group/name - [DEFAULT]/admin_workers
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#admin_workers = <None>

# The IP address of the network interface for the public service to listen on.
# (string value)
# Deprecated group/name - [DEFAULT]/bind_host
# Deprecated group/name - [DEFAULT]/public_bind_host
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#public_bind_host = 0.0.0.0

# The port number which the public service listens on. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/public_port
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#public_port = 5000

# The IP address of the network interface for the admin service to listen on.
# (string value)
# Deprecated group/name - [DEFAULT]/bind_host
# Deprecated group/name - [DEFAULT]/admin_bind_host
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#admin_bind_host = 0.0.0.0

# The port number which the admin service listens on. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/admin_port
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#admin_port = 35357

# If set to false, disables keepalives on the server; all connections will be
# closed after serving one request. (boolean value)
#wsgi_keep_alive = true

# Timeout for socket operations on a client connection. If an incoming
# connection is idle for this number of seconds it will be closed. A value of
# "0" means wait forever. (integer value)
#client_socket_timeout = 900

# Set this to true if you want to enable TCP_KEEPALIVE on server sockets, i.e.
# sockets used by the Keystone wsgi server for client connections. (boolean
# value)
# Deprecated group/name - [DEFAULT]/tcp_keepalive
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#tcp_keepalive = false

# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Only
# applies if tcp_keepalive is true. Ignored if system does not support it.
# (integer value)
# Deprecated group/name - [DEFAULT]/tcp_keepidle
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#tcp_keepidle = 600


[eventlet_server_ssl]

#
# From keystone
#

# Toggle for SSL support on the Keystone eventlet servers. (boolean value)
# Deprecated group/name - [ssl]/enable
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#enable = false

# Path of the certfile for SSL. For non-production environments, you may be
# interested in using `keystone-manage ssl_setup` to generate self-signed
# certificates. (string value)
# Deprecated group/name - [ssl]/certfile
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#certfile = /etc/keystone/ssl/certs/keystone.pem

# Path of the keyfile for SSL. (string value)
# Deprecated group/name - [ssl]/keyfile
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#keyfile = /etc/keystone/ssl/private/keystonekey.pem

# Path of the CA cert file for SSL. (string value)
# Deprecated group/name - [ssl]/ca_certs
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#ca_certs = /etc/keystone/ssl/certs/ca.pem

# Require client certificate. (boolean value)
# Deprecated group/name - [ssl]/cert_required
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#cert_required = false


[federation]

#
# From keystone
#

# Entrypoint for the federation backend driver in the keystone.federation
# namespace. (string value)
#driver = sql

# Value to be used when filtering assertion parameters from the environment.
# (string value)
#assertion_prefix =

# Value to be used to obtain the entity ID of the Identity Provider from the
# environment (e.g. if using the mod_shib plugin this value is `Shib-Identity-
# Provider`). (string value)
#remote_id_attribute = <None>

# A domain name that is reserved to allow federated ephemeral users to have a
# domain concept. Note that an admin will not be able to create a domain with
# this name or update an existing domain to this name. You are not advised to
# change this value unless you really have to. (string value)
#federated_domain_name = Federated

# A list of trusted dashboard hosts. Before accepting a Single Sign-On request
# to return a token, the origin host must be a member of the trusted_dashboard
# list. This configuration option may be repeated for multiple values. For
# example: trusted_dashboard=http://acme.com/auth/websso
# trusted_dashboard=http://beta.com/auth/websso (multi valued)
#trusted_dashboard =

# Location of Single Sign-On callback handler, will return a token to a trusted
# dashboard host. (string value)
#sso_callback_template = /etc/keystone/sso_callback_template.html


[fernet_tokens]

#
# From keystone
#

# Directory containing Fernet token keys. (string value)
#key_repository = /etc/keystone/fernet-keys/

# This controls how many keys are held in rotation by keystone-manage
# fernet_rotate before they are discarded. The default value of 3 means that
# keystone will maintain one staged key, one primary key, and one secondary
# key. Increasing this value means that additional secondary keys will be kept
# in the rotation. (integer value)
#max_active_keys = 3


[identity]

#
# From keystone
#

# This references the domain to use for all Identity API v2 requests (which are
# not aware of domains). A domain with this ID will be created for you by
# keystone-manage db_sync in migration 008. The domain referenced by this ID
# cannot be deleted on the v3 API, to prevent accidentally breaking the v2 API.
# There is nothing special about this domain, other than the fact that it must
# exist to order to maintain support for your v2 clients. (string value)
#default_domain_id = default

# A subset (or all) of domains can have their own identity driver, each with
# their own partial configuration options, stored in either the resource
# backend or in a file in a domain configuration directory (depending on the
# setting of domain_configurations_from_database). Only values specific to the
# domain need to be specified in this manner. This feature is disabled by
# default; set to true to enable. (boolean value)
#domain_specific_drivers_enabled = false

# Extract the domain specific configuration options from the resource backend
# where they have been stored with the domain data. This feature is disabled by
# default (in which case the domain specific options will be loaded from files
# in the domain configuration directory); set to true to enable. (boolean
# value)
#domain_configurations_from_database = false

# Path for Keystone to locate the domain specific identity configuration files
# if domain_specific_drivers_enabled is set to true. (string value)
#domain_config_dir = /etc/keystone/domains

# Entrypoint for the identity backend driver in the keystone.identity
# namespace. Supplied drivers are ldap and sql. (string value)
#driver = sql

# Toggle for identity caching. This has no effect unless global caching is
# enabled. (boolean value)
#caching = true

# Time to cache identity data (in seconds). This has no effect unless global
# and identity caching are enabled. (integer value)
#cache_time = 600

# Maximum supported length for user passwords; decrease to improve performance.
# (integer value)
# Maximum value: 4096
#max_password_length = 4096

# Maximum number of entities that will be returned in an identity collection.
# (integer value)
#list_limit = <None>


[identity_mapping]

#
# From keystone
#

# Entrypoint for the identity mapping backend driver in the
# keystone.identity.id_mapping namespace. (string value)
#driver = sql

# Entrypoint for the public ID generator for user and group entities in the
# keystone.identity.id_generator namespace. The Keystone identity mapper only
# supports generators that produce no more than 64 characters. (string value)
#generator = sha256

# The format of user and group IDs changed in Juno for backends that do not
# generate UUIDs (e.g. LDAP), with keystone providing a hash mapping to the
# underlying attribute in LDAP. By default this mapping is disabled, which
# ensures that existing IDs will not change. Even when the mapping is enabled
# by using domain specific drivers, any users and groups from the default
# domain being handled by LDAP will still not be mapped to ensure their IDs
# remain backward compatible. Setting this value to False will enable the
# mapping for even the default LDAP driver. It is only safe to do this if you
# do not already have assignments for users and groups from the default LDAP
# domain, and it is acceptable for Keystone to provide the different IDs to
# clients than it did previously. Typically this means that the only time you
# can set this value to False is when configuring a fresh installation.
# (boolean value)
#backward_compatible_ids = true


[kvs]

#
# From keystone
#

# Extra dogpile.cache backend modules to register with the dogpile.cache
# library. (list value)
#backends =

# Prefix for building the configuration dictionary for the KVS region. This
# should not need to be changed unless there is another dogpile.cache region
# with the same configuration name. (string value)
#config_prefix = keystone.kvs

# Toggle to disable using a key-mangling function to ensure fixed length keys.
# This is toggle-able for debugging purposes, it is highly recommended to
# always leave this set to true. (boolean value)
#enable_key_mangler = true

# Default lock timeout (in seconds) for distributed locking. (integer value)
#default_lock_timeout = 5


[ldap]

#
# From keystone
#

# URL(s) for connecting to the LDAP server. Multiple LDAP URLs may be specified
# as a comma separated string. The first URL to successfully bind is used for
# the connection. (string value)
#url = ldap://localhost

# User BindDN to query the LDAP server. (string value)
#user = <None>

# Password for the BindDN to query the LDAP server. (string value)
#password = <None>

# LDAP server suffix (string value)
#suffix = cn=example,cn=com

# If true, will add a dummy member to groups. This is required if the
# objectclass for groups requires the "member" attribute. (boolean value)
#use_dumb_member = false

# DN of the "dummy member" to use when "use_dumb_member" is enabled. (string
# value)
#dumb_member = cn=dumb,dc=nonexistent

# Delete subtrees using the subtree delete control. Only enable this option if
# your LDAP server supports subtree deletion. (boolean value)
#allow_subtree_delete = false

# The LDAP scope for queries, "one" represents oneLevel/singleLevel and "sub"
# represents subtree/wholeSubtree options. (string value)
# Allowed values: one, sub
#query_scope = one

# Maximum results per page; a value of zero ("0") disables paging. (integer
# value)
#page_size = 0

# The LDAP dereferencing option for queries. The "default" option falls back to
# using default dereferencing configured by your ldap.conf. (string value)
# Allowed values: never, searching, always, finding, default
#alias_dereferencing = default

# Sets the LDAP debugging level for LDAP calls. A value of 0 means that
# debugging is not enabled. This value is a bitmask, consult your LDAP
# documentation for possible values. (integer value)
#debug_level = <None>

# Override the system's default referral chasing behavior for queries. (boolean
# value)
#chase_referrals = <None>

# Search base for users. Defaults to the suffix value. (string value)
#user_tree_dn = <None>

# LDAP search filter for users. (string value)
#user_filter = <None>

# LDAP objectclass for users. (string value)
#user_objectclass = inetOrgPerson

# LDAP attribute mapped to user id. WARNING: must not be a multivalued
# attribute. (string value)
#user_id_attribute = cn

# LDAP attribute mapped to user name. (string value)
#user_name_attribute = sn

# LDAP attribute mapped to user description. (string value)
#user_description_attribute = description

# LDAP attribute mapped to user email. (string value)
#user_mail_attribute = mail

# LDAP attribute mapped to password. (string value)
#user_pass_attribute = userPassword

# LDAP attribute mapped to user enabled flag. (string value)
#user_enabled_attribute = enabled

# Invert the meaning of the boolean enabled values. Some LDAP servers use a
# boolean lock attribute where "true" means an account is disabled. Setting
# "user_enabled_invert = true" will allow these lock attributes to be used.
# This setting will have no effect if "user_enabled_mask" or
# "user_enabled_emulation" settings are in use. (boolean value)
#user_enabled_invert = false

# Bitmask integer to indicate the bit that the enabled value is stored in if
# the LDAP server represents "enabled" as a bit on an integer rather than a
# boolean. A value of "0" indicates the mask is not used. If this is not set to
# "0" the typical value is "2". This is typically used when
# "user_enabled_attribute = userAccountControl". (integer value)
#user_enabled_mask = 0

# Default value to enable users. This should match an appropriate int value if
# the LDAP server uses non-boolean (bitmask) values to indicate if a user is
# enabled or disabled. If this is not set to "True" the typical value is "512".
# This is typically used when "user_enabled_attribute = userAccountControl".
# (string value)
#user_enabled_default = True

# List of attributes stripped off the user on update. (list value)
#user_attribute_ignore = default_project_id

# LDAP attribute mapped to default_project_id for users. (string value)
#user_default_project_id_attribute = <None>

# Allow user creation in LDAP backend. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Write support for Identity LDAP backends has been deprecated in the M
# release and will be removed in the O release.
#user_allow_create = true

# Allow user updates in LDAP backend. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Write support for Identity LDAP backends has been deprecated in the M
# release and will be removed in the O release.
#user_allow_update = true

# Allow user deletion in LDAP backend. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Write support for Identity LDAP backends has been deprecated in the M
# release and will be removed in the O release.
#user_allow_delete = true

# If true, Keystone uses an alternative method to determine if a user is
# enabled or not by checking if they are a member of the
# "user_enabled_emulation_dn" group. (boolean value)
#user_enabled_emulation = false

# DN of the group entry to hold enabled users when using enabled emulation.
# (string value)
#user_enabled_emulation_dn = <None>

# Use the "group_member_attribute" and "group_objectclass" settings to
# determine membership in the emulated enabled group. (boolean value)
#user_enabled_emulation_use_group_config = false

# List of additional LDAP attributes used for mapping additional attribute
# mappings for users. Attribute mapping format is <ldap_attr>:<user_attr>,
# where ldap_attr is the attribute in the LDAP entry and user_attr is the
# Identity API attribute. (list value)
#user_additional_attribute_mapping =

# Search base for groups. Defaults to the suffix value. (string value)
#group_tree_dn = <None>

# LDAP search filter for groups. (string value)
#group_filter = <None>

# LDAP objectclass for groups. (string value)
#group_objectclass = groupOfNames

# LDAP attribute mapped to group id. (string value)
#group_id_attribute = cn

# LDAP attribute mapped to group name. (string value)
#group_name_attribute = ou

# LDAP attribute mapped to show group membership. (string value)
#group_member_attribute = member

# LDAP attribute mapped to group description. (string value)
#group_desc_attribute = description

# List of attributes stripped off the group on update. (list value)
#group_attribute_ignore =

# Allow group creation in LDAP backend. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Write support for Identity LDAP backends has been deprecated in the M
# release and will be removed in the O release.
#group_allow_create = true

# Allow group update in LDAP backend. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Write support for Identity LDAP backends has been deprecated in the M
# release and will be removed in the O release.
#group_allow_update = true

# Allow group deletion in LDAP backend. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Write support for Identity LDAP backends has been deprecated in the M
# release and will be removed in the O release.
#group_allow_delete = true

# Additional attribute mappings for groups. Attribute mapping format is
# <ldap_attr>:<user_attr>, where ldap_attr is the attribute in the LDAP entry
# and user_attr is the Identity API attribute. (list value)
#group_additional_attribute_mapping =

# CA certificate file path for communicating with LDAP servers. (string value)
#tls_cacertfile = <None>

# CA certificate directory path for communicating with LDAP servers. (string
# value)
#tls_cacertdir = <None>

# Enable TLS for communicating with LDAP servers. (boolean value)
#use_tls = false

# Specifies what checks to perform on client certificates in an incoming TLS
# session. (string value)
# Allowed values: demand, never, allow
#tls_req_cert = demand

# Enable LDAP connection pooling. (boolean value)
#use_pool = true

# Connection pool size. (integer value)
#pool_size = 10

# Maximum count of reconnect trials. (integer value)
#pool_retry_max = 3

# Time span in seconds to wait between two reconnect trials. (floating point
# value)
#pool_retry_delay = 0.1

# Connector timeout in seconds. Value -1 indicates indefinite wait for
# response. (integer value)
#pool_connection_timeout = -1

# Connection lifetime in seconds. (integer value)
#pool_connection_lifetime = 600

# Enable LDAP connection pooling for end user authentication. If use_pool is
# disabled, then this setting is meaningless and is not used at all. (boolean
# value)
#use_auth_pool = true

# End user auth connection pool size. (integer value)
#auth_pool_size = 100

# End user auth connection lifetime in seconds. (integer value)
#auth_pool_connection_lifetime = 60

# If the members of the group objectclass are user IDs rather than DNs, set
# this to true. This is the case when using posixGroup as the group objectclass
# and OpenDirectory. (boolean value)
#group_members_are_ids = false


[matchmaker_redis]

#
# From oslo.messaging
#

# Host to locate redis. (string value)
#host = 127.0.0.1

# Use this port to connect to redis host. (port value)
# Minimum value: 0
# Maximum value: 65535
#port = 6379

# Password for Redis server (optional). (string value)
#password =

# List of Redis Sentinel hosts (fault tolerance mode) e.g.
# [host:port, host1:port ... ] (list value)
#sentinel_hosts =

# Redis replica set name. (string value)
#sentinel_group_name = oslo-messaging-zeromq

# Time in ms to wait between connection attempts. (integer value)
#wait_timeout = 500

# Time in ms to wait before the transaction is killed. (integer value)
#check_timeout = 20000

# Timeout in ms on blocking socket operations (integer value)
#socket_timeout = 1000


[memcache]

#
# From keystone
#

# Memcache servers in the format of "host:port". (list value)
#servers = localhost:11211

# Number of seconds memcached server is considered dead before it is tried
# again. This is used by the key value store system (e.g. token pooled
# memcached persistence backend). (integer value)
#dead_retry = 300

# Timeout in seconds for every call to a server. This is used by the key value
# store system (e.g. token pooled memcached persistence backend). (integer
# value)
#socket_timeout = 3

# Max total number of open connections to every memcached server. This is used
# by the key value store system (e.g. token pooled memcached persistence
# backend). (integer value)
#pool_maxsize = 10

# Number of seconds a connection to memcached is held unused in the pool before
# it is closed. This is used by the key value store system (e.g. token pooled
# memcached persistence backend). (integer value)
#pool_unused_timeout = 60

# Number of seconds that an operation will wait to get a memcache client
# connection. This is used by the key value store system (e.g. token pooled
# memcached persistence backend). (integer value)
#pool_connection_get_timeout = 10


[oauth1]

#
# From keystone
#

# Entrypoint for the OAuth backend driver in the keystone.oauth1 namespace.
# (string value)
#driver = sql

# Duration (in seconds) for the OAuth Request Token. (integer value)
#request_token_duration = 28800

# Duration (in seconds) for the OAuth Access Token. (integer value)
#access_token_duration = 86400


[os_inherit]

#
# From keystone
#

# role-assignment inheritance to projects from owning domain or from projects
# higher in the hierarchy can be optionally disabled. In the future, this
# option will be removed and the hierarchy will be always enabled. (boolean
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The option to enable the OS-INHERIT extension has been deprecated in
# the M release and will be removed in the O release. The OS-INHERIT extension
# will be enabled by default.
#enabled = true


[oslo_messaging_amqp]

#
# From oslo.messaging
#

# address prefix used when sending to a specific server (string value)
# Deprecated group/name - [amqp1]/server_request_prefix
#server_request_prefix = exclusive

# address prefix used when broadcasting to all servers (string value)
# Deprecated group/name - [amqp1]/broadcast_prefix
#broadcast_prefix = broadcast

# address prefix when sending to any server in group (string value)
# Deprecated group/name - [amqp1]/group_request_prefix
#group_request_prefix = unicast

# Name for the AMQP container (string value)
# Deprecated group/name - [amqp1]/container_name
#container_name = <None>

# Timeout for inactive connections (in seconds) (integer value)
# Deprecated group/name - [amqp1]/idle_timeout
#idle_timeout = 0

# Debug: dump AMQP frames to stdout (boolean value)
# Deprecated group/name - [amqp1]/trace
#trace = false

# CA certificate PEM file to verify server certificate (string value)
# Deprecated group/name - [amqp1]/ssl_ca_file
#ssl_ca_file =

# Identifying certificate PEM file to present to clients (string value)
# Deprecated group/name - [amqp1]/ssl_cert_file
#ssl_cert_file =

# Private key PEM file used to sign cert_file certificate (string value)
# Deprecated group/name - [amqp1]/ssl_key_file
#ssl_key_file =

# Password for decrypting ssl_key_file (if encrypted) (string value)
# Deprecated group/name - [amqp1]/ssl_key_password
#ssl_key_password = <None>

# Accept clients using either SSL or plain TCP (boolean value)
# Deprecated group/name - [amqp1]/allow_insecure_clients
#allow_insecure_clients = false

# Space separated list of acceptable SASL mechanisms (string value)
# Deprecated group/name - [amqp1]/sasl_mechanisms
#sasl_mechanisms =

# Path to directory that contains the SASL configuration (string value)
# Deprecated group/name - [amqp1]/sasl_config_dir
#sasl_config_dir =

# Name of configuration file (without .conf suffix) (string value)
# Deprecated group/name - [amqp1]/sasl_config_name
#sasl_config_name =

# User name for message broker authentication (string value)
# Deprecated group/name - [amqp1]/username
#username =

# Password for message broker authentication (string value)
# Deprecated group/name - [amqp1]/password
#password =


[oslo_messaging_notifications]

#
# From oslo.messaging
#

# The Drivers(s) to handle sending notifications. Possible values are
# messaging, messagingv2, routing, log, test, noop (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
#driver =

# A URL representing the messaging driver to use for notifications. If not set,
# we fall back to the same configuration used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
#transport_url = <None>

# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
#topics = notifications


[oslo_messaging_rabbit]

#
# From oslo.messaging
#

# Use durable queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_durable_queues
# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
#amqp_durable_queues = false

# Auto-delete queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_auto_delete
#amqp_auto_delete = false

# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_version
#kombu_ssl_version =

# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
#kombu_ssl_keyfile =

# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
#kombu_ssl_certfile =

# SSL certification authority file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
#kombu_ssl_ca_certs =

# How long to wait before reconnecting in response to an AMQP consumer cancel
# notification. (floating point value)
# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
#kombu_reconnect_delay = 1.0

# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
# be used. This option may notbe available in future versions. (string value)
#kombu_compression = <None>

# How long to wait a missing client beforce abandoning to send it its replies.
# This value should not be longer than rpc_response_timeout. (integer value)
# Deprecated group/name - [DEFAULT]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60

# Determines how the next RabbitMQ node is chosen in case the one we are
# currently connected to becomes unavailable. Takes effect only if more than
# one RabbitMQ node is provided in config. (string value)
# Allowed values: round-robin, shuffle
#kombu_failover_strategy = round-robin

# The RabbitMQ broker address where a single node is used. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_host
#rabbit_host = localhost

# The RabbitMQ broker port where a single node is used. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/rabbit_port
#rabbit_port = 5672

# RabbitMQ HA cluster host:port pairs. (list value)
# Deprecated group/name - [DEFAULT]/rabbit_hosts
#rabbit_hosts = $rabbit_host:$rabbit_port

# Connect over SSL for RabbitMQ. (boolean value)
# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
#rabbit_use_ssl = false

# The RabbitMQ userid. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_userid
#rabbit_userid = guest

# The RabbitMQ password. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_password
#rabbit_password = guest

# The RabbitMQ login method. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_login_method
#rabbit_login_method = AMQPLAIN

# The RabbitMQ virtual host. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
#rabbit_virtual_host = /

# How frequently to retry connecting with RabbitMQ. (integer value)
#rabbit_retry_interval = 1

# How long to backoff for between retries when connecting to RabbitMQ. (integer
# value)
# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
#rabbit_retry_backoff = 2

# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
# (integer value)
#rabbit_interval_max = 30

# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
# count). (integer value)
# Deprecated group/name - [DEFAULT]/rabbit_max_retries
#rabbit_max_retries = 0

# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
# is no longer controlled by the x-ha-policy argument when declaring a queue.
# If you just want to make sure that all queues (except  those with auto-
# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
#rabbit_ha_queues = false

# Positive integer representing duration in seconds for queue TTL (x-expires).
# Queues which are unused for the duration of the TTL are automatically
# deleted. The parameter affects only reply and fanout queues. (integer value)
# Minimum value: 1
#rabbit_transient_queues_ttl = 1800

# Specifies the number of messages to prefetch. Setting to zero allows
# unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0

# Number of seconds after which the Rabbit broker is considered down if
# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
# value)
#heartbeat_timeout_threshold = 60

# How often times during the heartbeat_timeout_threshold we check the
# heartbeat. (integer value)
#heartbeat_rate = 2

# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
# Deprecated group/name - [DEFAULT]/fake_rabbit
#fake_rabbit = false

# Maximum number of channels to allow (integer value)
#channel_max = <None>

# The maximum byte size for an AMQP frame (integer value)
#frame_max = <None>

# How often to send heartbeats for consumer's connections (integer value)
#heartbeat_interval = 1

# Enable SSL (boolean value)
#ssl = <None>

# Arguments passed to ssl.wrap_socket (dict value)
#ssl_options = <None>

# Set socket timeout in seconds for connection's socket (floating point value)
#socket_timeout = 0.25

# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
# value)
#tcp_user_timeout = 0.25

# Set delay for reconnection to some host which has connection error (floating
# point value)
#host_connection_reconnect_delay = 0.25

# Maximum number of connections to keep queued. (integer value)
#pool_max_size = 10

# Maximum number of connections to create above `pool_max_size`. (integer
# value)
#pool_max_overflow = 0

# Default number of seconds to wait for a connections to available (integer
# value)
#pool_timeout = 30

# Lifetime of a connection (since creation) in seconds or None for no
# recycling. Expired connections are closed on acquire. (integer value)
#pool_recycle = 600

# Threshold at which inactive (since release) connections are considered stale
# in seconds or None for no staleness. Stale connections are closed on acquire.
# (integer value)
#pool_stale = 60

# Persist notification messages. (boolean value)
#notification_persistence = false

# Exchange name for for sending notifications (string value)
#default_notification_exchange = ${control_exchange}_notification

# Max number of not acknowledged message which RabbitMQ can send to
# notification listener. (integer value)
#notification_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# notification, -1 means infinite retry. (integer value)
#default_notification_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# notification message (floating point value)
#notification_retry_delay = 0.25

# Time to live for rpc queues without consumers in seconds. (integer value)
#rpc_queue_expiration = 60

# Exchange name for sending RPC messages (string value)
#default_rpc_exchange = ${control_exchange}_rpc

# Exchange name for receiving RPC replies (string value)
#rpc_reply_exchange = ${control_exchange}_rpc_reply

# Max number of not acknowledged message which RabbitMQ can send to rpc
# listener. (integer value)
#rpc_listener_prefetch_count = 100

# Max number of not acknowledged message which RabbitMQ can send to rpc reply
# listener. (integer value)
#rpc_reply_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# reply. -1 means infinite retry during rpc_timeout (integer value)
#rpc_reply_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# reply. (floating point value)
#rpc_reply_retry_delay = 0.25

# Reconnecting retry count in case of connectivity problem during sending RPC
# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
# request could be processed more then one time (integer value)
#default_rpc_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending RPC
# message (floating point value)
#rpc_retry_delay = 0.25


[oslo_middleware]

#
# From oslo.middleware
#

# The maximum body size for each  request, in bytes. (integer value)
# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
# Deprecated group/name - [DEFAULT]/max_request_body_size
#max_request_body_size = 114688

# The HTTP Header that will be used to determine what the original request
# protocol scheme was, even if it was hidden by an SSL termination proxy.
# (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#secure_proxy_ssl_header = X-Forwarded-Proto


[oslo_policy]

#
# From oslo.policy
#

# The JSON file that defines policies. (string value)
# Deprecated group/name - [DEFAULT]/policy_file
#policy_file = policy.json

# Default rule. Enforced when a requested rule is not found. (string value)
# Deprecated group/name - [DEFAULT]/policy_default_rule
#policy_default_rule = default

# Directories where policy configuration files are stored. They can be relative
# to any directory in the search path defined by the config_dir option, or
# absolute paths. The file defined by policy_file must exist for these
# directories to be searched.  Missing or empty directories are ignored. (multi
# valued)
# Deprecated group/name - [DEFAULT]/policy_dirs
#policy_dirs = policy.d


[paste_deploy]

#
# From keystone
#

# Name of the paste configuration file that defines the available pipelines.
# (string value)
#config_file = keystone-paste.ini


[policy]

#
# From keystone
#

# Entrypoint for the policy backend driver in the keystone.policy namespace.
# Supplied drivers are rules and sql. (string value)
#driver = sql

# Maximum number of entities that will be returned in a policy collection.
# (integer value)
#list_limit = <None>


[resource]

#
# From keystone
#

# Entrypoint for the resource backend driver in the keystone.resource
# namespace. Only an SQL driver is supplied. If a resource driver is not
# specified, the assignment driver will choose the resource driver. (string
# value)
#driver = <None>

# Toggle for resource caching. This has no effect unless global caching is
# enabled. (boolean value)
# Deprecated group/name - [assignment]/caching
#caching = true

# TTL (in seconds) to cache resource data. This has no effect unless global
# caching is enabled. (integer value)
# Deprecated group/name - [assignment]/cache_time
#cache_time = <None>

# Maximum number of entities that will be returned in a resource collection.
# (integer value)
# Deprecated group/name - [assignment]/list_limit
#list_limit = <None>

# Name of the domain that owns the `admin_project_name`. Defaults to None.
# (string value)
#admin_project_domain_name = <None>

# Special project for performing administrative operations on remote services.
# Tokens scoped to this project will contain the key/value
# `is_admin_project=true`. Defaults to None. (string value)
#admin_project_name = <None>

# Whether the names of projects are restricted from containing url reserved
# characters. If set to new, attempts to create or update a project with a url
# unsafe name will return an error. In addition, if set to strict, attempts to
# scope a token using an unsafe project name will return an error. (string
# value)
# Allowed values: off, new, strict
#project_name_url_safe = off

# Whether the names of domains are restricted from containing url reserved
# characters. If set to new, attempts to create or update a domain with a url
# unsafe name will return an error. In addition, if set to strict, attempts to
# scope a token using a domain name which is unsafe will return an error.
# (string value)
# Allowed values: off, new, strict
#domain_name_url_safe = off


[revoke]

#
# From keystone
#

# Entrypoint for an implementation of the backend for persisting revocation
# events in the keystone.revoke namespace. Supplied drivers are kvs and sql.
# (string value)
#driver = sql

# This value (calculated in seconds) is added to token expiration before a
# revocation event may be removed from the backend. (integer value)
#expiration_buffer = 1800

# Toggle for revocation event caching. This has no effect unless global caching
# is enabled. (boolean value)
#caching = true

# Time to cache the revocation list and the revocation events (in seconds).
# This has no effect unless global and token caching are enabled. (integer
# value)
# Deprecated group/name - [token]/revocation_cache_time
#cache_time = 3600


[role]

#
# From keystone
#

# Entrypoint for the role backend driver in the keystone.role namespace.
# Supplied drivers are ldap and sql. (string value)
#driver = <None>

# Toggle for role caching. This has no effect unless global caching is enabled.
# (boolean value)
#caching = true

# TTL (in seconds) to cache role data. This has no effect unless global caching
# is enabled. (integer value)
#cache_time = <None>

# Maximum number of entities that will be returned in a role collection.
# (integer value)
#list_limit = <None>


[saml]

#
# From keystone
#

# Default TTL, in seconds, for any generated SAML assertion created by
# Keystone. (integer value)
#assertion_expiration_time = 3600

# Binary to be called for XML signing. Install the appropriate package, specify
# absolute path or adjust your PATH environment variable if the binary cannot
# be found. (string value)
#xmlsec1_binary = xmlsec1

# Path of the certfile for SAML signing. For non-production environments, you
# may be interested in using `keystone-manage pki_setup` to generate self-
# signed certificates. Note, the path cannot contain a comma. (string value)
#certfile = /etc/keystone/ssl/certs/signing_cert.pem

# Path of the keyfile for SAML signing. Note, the path cannot contain a comma.
# (string value)
#keyfile = /etc/keystone/ssl/private/signing_key.pem

# Entity ID value for unique Identity Provider identification. Usually FQDN is
# set with a suffix. A value is required to generate IDP Metadata. For example:
# https://keystone.example.com/v3/OS-FEDERATION/saml2/idp (string value)
#idp_entity_id = <None>

# Identity Provider Single-Sign-On service value, required in the Identity
# Provider's metadata. A value is required to generate IDP Metadata. For
# example: https://keystone.example.com/v3/OS-FEDERATION/saml2/sso (string
# value)
#idp_sso_endpoint = <None>

# Language used by the organization. (string value)
#idp_lang = en

# Organization name the installation belongs to. (string value)
#idp_organization_name = <None>

# Organization name to be displayed. (string value)
#idp_organization_display_name = <None>

# URL of the organization. (string value)
#idp_organization_url = <None>

# Company of contact person. (string value)
#idp_contact_company = <None>

# Given name of contact person (string value)
#idp_contact_name = <None>

# Surname of contact person. (string value)
#idp_contact_surname = <None>

# Email address of contact person. (string value)
#idp_contact_email = <None>

# Telephone number of contact person. (string value)
#idp_contact_telephone = <None>

# The contact type describing the main point of contact for the identity
# provider. (string value)
# Allowed values: technical, support, administrative, billing, other
#idp_contact_type = other

# Path to the Identity Provider Metadata file. This file should be generated
# with the keystone-manage saml_idp_metadata command. (string value)
#idp_metadata_path = /etc/keystone/saml2_idp_metadata.xml

# The prefix to use for the RelayState SAML attribute, used when generating ECP
# wrapped assertions. (string value)
#relay_state_prefix = ss:mem:


[shadow_users]

#
# From keystone
#

# Entrypoint for the shadow users backend driver in the
# keystone.identity.shadow_users namespace. (string value)
#driver = sql


[signing]

#
# From keystone
#

# Path of the certfile for token signing. For non-production environments, you
# may be interested in using `keystone-manage pki_setup` to generate self-
# signed certificates. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: PKI token support has been deprecated in the M release and will be
# removed in the O release. Fernet or UUID tokens are recommended.
#certfile = /etc/keystone/ssl/certs/signing_cert.pem

# Path of the keyfile for token signing. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: PKI token support has been deprecated in the M release and will be
# removed in the O release. Fernet or UUID tokens are recommended.
#keyfile = /etc/keystone/ssl/private/signing_key.pem

# Path of the CA for token signing. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: PKI token support has been deprecated in the M release and will be
# removed in the O release. Fernet or UUID tokens are recommended.
#ca_certs = /etc/keystone/ssl/certs/ca.pem

# Path of the CA key for token signing. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: PKI token support has been deprecated in the M release and will be
# removed in the O release. Fernet or UUID tokens are recommended.
#ca_key = /etc/keystone/ssl/private/cakey.pem

# Key size (in bits) for token signing cert (auto generated certificate).
# (integer value)
# Minimum value: 1024
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: PKI token support has been deprecated in the M release and will be
# removed in the O release. Fernet or UUID tokens are recommended.
#key_size = 2048

# Days the token signing cert is valid for (auto generated certificate).
# (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: PKI token support has been deprecated in the M release and will be
# removed in the O release. Fernet or UUID tokens are recommended.
#valid_days = 3650

# Certificate subject (auto generated certificate) for token signing. (string
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: PKI token support has been deprecated in the M release and will be
# removed in the O release. Fernet or UUID tokens are recommended.
#cert_subject = /C=US/ST=Unset/L=Unset/O=Unset/CN=www.example.com


[ssl]

#
# From keystone
#

# Path of the CA key file for SSL. (string value)
#ca_key = /etc/keystone/ssl/private/cakey.pem

# SSL key length (in bits) (auto generated certificate). (integer value)
# Minimum value: 1024
#key_size = 1024

# Days the certificate is valid for once signed (auto generated certificate).
# (integer value)
#valid_days = 3650

# SSL certificate subject (auto generated certificate). (string value)
#cert_subject = /C=US/ST=Unset/L=Unset/O=Unset/CN=localhost


[token]
provider = fernet

#
# From keystone
#

# External auth mechanisms that should add bind information to token, e.g.,
# kerberos,x509. (list value)
#bind =

# Enforcement policy on tokens presented to Keystone with bind information. One
# of disabled, permissive, strict, required or a specifically required bind
# mode, e.g., kerberos or x509 to require binding to that authentication.
# (string value)
#enforce_token_bind = permissive

# Amount of time a token should remain valid (in seconds). (integer value)
#expiration = 3600

# Controls the token construction, validation, and revocation operations.
# Entrypoint in the keystone.token.provider namespace. Core providers are
# [fernet|pkiz|pki|uuid]. (string value)
#provider = uuid

# Entrypoint for the token persistence backend driver in the
# keystone.token.persistence namespace. Supplied drivers are kvs, memcache,
# memcache_pool, and sql. (string value)
#driver = sql

# Toggle for token system caching. This has no effect unless global caching is
# enabled. (boolean value)
#caching = true

# Time to cache tokens (in seconds). This has no effect unless global and token
# caching are enabled. (integer value)
#cache_time = <None>

# Revoke token by token identifier. Setting revoke_by_id to true enables
# various forms of enumerating tokens, e.g. `list tokens for user`. These
# enumerations are processed to determine the list of tokens to revoke. Only
# disable if you are switching to using the Revoke extension with a backend
# other than KVS, which stores events in memory. (boolean value)
#revoke_by_id = true

# Allow rescoping of scoped token. Setting allow_rescoped_scoped_token to false
# prevents a user from exchanging a scoped token for any other token. (boolean
# value)
#allow_rescope_scoped_token = true

# The hash algorithm to use for PKI tokens. This can be set to any algorithm
# that hashlib supports. WARNING: Before changing this value, the auth_token
# middleware must be configured with the hash_algorithms, otherwise token
# revocation will not be processed correctly. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: PKI token support has been deprecated in the M release and will be
# removed in the O release. Fernet or UUID tokens are recommended.
#hash_algorithm = md5

# Add roles to token that are not explicitly added, but that are linked
# implicitly to other roles. (boolean value)
#infer_roles = true


[tokenless_auth]

#
# From keystone
#

# The list of trusted issuers to further filter the certificates that are
# allowed to participate in the X.509 tokenless authorization. If the option is
# absent then no certificates will be allowed. The naming format for the
# attributes of a Distinguished Name(DN) must be separated by a comma and
# contain no spaces. This configuration option may be repeated for multiple
# values. For example: trusted_issuer=CN=john,OU=keystone,O=openstack
# trusted_issuer=CN=mary,OU=eng,O=abc (multi valued)
#trusted_issuer =

# The protocol name for the X.509 tokenless authorization along with the option
# issuer_attribute below can look up its corresponding mapping. (string value)
#protocol = x509

# The issuer attribute that is served as an IdP ID for the X.509 tokenless
# authorization along with the protocol to look up its corresponding mapping.
# It is the environment variable in the WSGI environment that references to the
# issuer of the client certificate. (string value)
#issuer_attribute = SSL_CLIENT_I_DN


[trust]

#
# From keystone
#

# Delegation and impersonation features can be optionally disabled. (boolean
# value)
#enabled = true

# Enable redelegation feature. (boolean value)
#allow_redelegation = false

# Maximum depth of trust redelegation. (integer value)
#max_redelegation_count = 3

# Entrypoint for the trust backend driver in the keystone.trust namespace.
# (string value)
#driver = sql

[extra_headers]
Distribution = Ubuntu