diff --git a/vendor/google.golang.org/grpc/resolver/resolver.go b/vendor/google.golang.org/grpc/resolver/resolver.go
new file mode 100644
index 0000000..03567d7
--- /dev/null
+++ b/vendor/google.golang.org/grpc/resolver/resolver.go
@@ -0,0 +1,263 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package resolver defines APIs for name resolution in gRPC.
+// All APIs in this package are experimental.
+package resolver
+
+import (
+	"context"
+	"net"
+
+	"google.golang.org/grpc/attributes"
+	"google.golang.org/grpc/credentials"
+	"google.golang.org/grpc/serviceconfig"
+)
+
+var (
+	// m is a map from scheme to resolver builder.
+	m = make(map[string]Builder)
+	// defaultScheme is the default scheme to use.
+	defaultScheme = "passthrough"
+)
+
+// TODO(bar) install dns resolver in init(){}.
+
+// Register registers the resolver builder to the resolver map. b.Scheme will be
+// used as the scheme registered with this builder.
+//
+// NOTE: this function must only be called during initialization time (i.e. in
+// an init() function), and is not thread-safe. If multiple Resolvers are
+// registered with the same name, the one registered last will take effect.
+func Register(b Builder) {
+	m[b.Scheme()] = b
+}
+
+// Get returns the resolver builder registered with the given scheme.
+//
+// If no builder is register with the scheme, nil will be returned.
+func Get(scheme string) Builder {
+	if b, ok := m[scheme]; ok {
+		return b
+	}
+	return nil
+}
+
+// SetDefaultScheme sets the default scheme that will be used. The default
+// default scheme is "passthrough".
+//
+// NOTE: this function must only be called during initialization time (i.e. in
+// an init() function), and is not thread-safe. The scheme set last overrides
+// previously set values.
+func SetDefaultScheme(scheme string) {
+	defaultScheme = scheme
+}
+
+// GetDefaultScheme gets the default scheme that will be used.
+func GetDefaultScheme() string {
+	return defaultScheme
+}
+
+// AddressType indicates the address type returned by name resolution.
+//
+// Deprecated: use Attributes in Address instead.
+type AddressType uint8
+
+const (
+	// Backend indicates the address is for a backend server.
+	//
+	// Deprecated: use Attributes in Address instead.
+	Backend AddressType = iota
+	// GRPCLB indicates the address is for a grpclb load balancer.
+	//
+	// Deprecated: use Attributes in Address instead.
+	GRPCLB
+)
+
+// Address represents a server the client connects to.
+// This is the EXPERIMENTAL API and may be changed or extended in the future.
+type Address struct {
+	// Addr is the server address on which a connection will be established.
+	Addr string
+
+	// ServerName is the name of this address.
+	// If non-empty, the ServerName is used as the transport certification authority for
+	// the address, instead of the hostname from the Dial target string. In most cases,
+	// this should not be set.
+	//
+	// If Type is GRPCLB, ServerName should be the name of the remote load
+	// balancer, not the name of the backend.
+	//
+	// WARNING: ServerName must only be populated with trusted values. It
+	// is insecure to populate it with data from untrusted inputs since untrusted
+	// values could be used to bypass the authority checks performed by TLS.
+	ServerName string
+
+	// Attributes contains arbitrary data about this address intended for
+	// consumption by the load balancing policy.
+	Attributes *attributes.Attributes
+
+	// Type is the type of this address.
+	//
+	// Deprecated: use Attributes instead.
+	Type AddressType
+
+	// Metadata is the information associated with Addr, which may be used
+	// to make load balancing decision.
+	//
+	// Deprecated: use Attributes instead.
+	Metadata interface{}
+}
+
+// BuildOption is a type alias of BuildOptions for legacy reasons.
+//
+// Deprecated: use BuildOptions instead.
+type BuildOption = BuildOptions
+
+// BuildOptions includes additional information for the builder to create
+// the resolver.
+type BuildOptions struct {
+	// DisableServiceConfig indicates whether a resolver implementation should
+	// fetch service config data.
+	DisableServiceConfig bool
+	// DialCreds is the transport credentials used by the ClientConn for
+	// communicating with the target gRPC service (set via
+	// WithTransportCredentials). In cases where a name resolution service
+	// requires the same credentials, the resolver may use this field. In most
+	// cases though, it is not appropriate, and this field may be ignored.
+	DialCreds credentials.TransportCredentials
+	// CredsBundle is the credentials bundle used by the ClientConn for
+	// communicating with the target gRPC service (set via
+	// WithCredentialsBundle). In cases where a name resolution service
+	// requires the same credentials, the resolver may use this field. In most
+	// cases though, it is not appropriate, and this field may be ignored.
+	CredsBundle credentials.Bundle
+	// Dialer is the custom dialer used by the ClientConn for dialling the
+	// target gRPC service (set via WithDialer). In cases where a name
+	// resolution service requires the same dialer, the resolver may use this
+	// field. In most cases though, it is not appropriate, and this field may
+	// be ignored.
+	Dialer func(context.Context, string) (net.Conn, error)
+}
+
+// State contains the current Resolver state relevant to the ClientConn.
+type State struct {
+	// Addresses is the latest set of resolved addresses for the target.
+	Addresses []Address
+
+	// ServiceConfig contains the result from parsing the latest service
+	// config.  If it is nil, it indicates no service config is present or the
+	// resolver does not provide service configs.
+	ServiceConfig *serviceconfig.ParseResult
+
+	// Attributes contains arbitrary data about the resolver intended for
+	// consumption by the load balancing policy.
+	Attributes *attributes.Attributes
+}
+
+// ClientConn contains the callbacks for resolver to notify any updates
+// to the gRPC ClientConn.
+//
+// This interface is to be implemented by gRPC. Users should not need a
+// brand new implementation of this interface. For the situations like
+// testing, the new implementation should embed this interface. This allows
+// gRPC to add new methods to this interface.
+type ClientConn interface {
+	// UpdateState updates the state of the ClientConn appropriately.
+	UpdateState(State)
+	// ReportError notifies the ClientConn that the Resolver encountered an
+	// error.  The ClientConn will notify the load balancer and begin calling
+	// ResolveNow on the Resolver with exponential backoff.
+	ReportError(error)
+	// NewAddress is called by resolver to notify ClientConn a new list
+	// of resolved addresses.
+	// The address list should be the complete list of resolved addresses.
+	//
+	// Deprecated: Use UpdateState instead.
+	NewAddress(addresses []Address)
+	// NewServiceConfig is called by resolver to notify ClientConn a new
+	// service config. The service config should be provided as a json string.
+	//
+	// Deprecated: Use UpdateState instead.
+	NewServiceConfig(serviceConfig string)
+	// ParseServiceConfig parses the provided service config and returns an
+	// object that provides the parsed config.
+	ParseServiceConfig(serviceConfigJSON string) *serviceconfig.ParseResult
+}
+
+// Target represents a target for gRPC, as specified in:
+// https://github.com/grpc/grpc/blob/master/doc/naming.md.
+// It is parsed from the target string that gets passed into Dial or DialContext by the user. And
+// grpc passes it to the resolver and the balancer.
+//
+// If the target follows the naming spec, and the parsed scheme is registered with grpc, we will
+// parse the target string according to the spec. e.g. "dns://some_authority/foo.bar" will be parsed
+// into &Target{Scheme: "dns", Authority: "some_authority", Endpoint: "foo.bar"}
+//
+// If the target does not contain a scheme, we will apply the default scheme, and set the Target to
+// be the full target string. e.g. "foo.bar" will be parsed into
+// &Target{Scheme: resolver.GetDefaultScheme(), Endpoint: "foo.bar"}.
+//
+// If the parsed scheme is not registered (i.e. no corresponding resolver available to resolve the
+// endpoint), we set the Scheme to be the default scheme, and set the Endpoint to be the full target
+// string. e.g. target string "unknown_scheme://authority/endpoint" will be parsed into
+// &Target{Scheme: resolver.GetDefaultScheme(), Endpoint: "unknown_scheme://authority/endpoint"}.
+type Target struct {
+	Scheme    string
+	Authority string
+	Endpoint  string
+}
+
+// Builder creates a resolver that will be used to watch name resolution updates.
+type Builder interface {
+	// Build creates a new resolver for the given target.
+	//
+	// gRPC dial calls Build synchronously, and fails if the returned error is
+	// not nil.
+	Build(target Target, cc ClientConn, opts BuildOptions) (Resolver, error)
+	// Scheme returns the scheme supported by this resolver.
+	// Scheme is defined at https://github.com/grpc/grpc/blob/master/doc/naming.md.
+	Scheme() string
+}
+
+// ResolveNowOption is a type alias of ResolveNowOptions for legacy reasons.
+//
+// Deprecated: use ResolveNowOptions instead.
+type ResolveNowOption = ResolveNowOptions
+
+// ResolveNowOptions includes additional information for ResolveNow.
+type ResolveNowOptions struct{}
+
+// Resolver watches for the updates on the specified target.
+// Updates include address updates and service config updates.
+type Resolver interface {
+	// ResolveNow will be called by gRPC to try to resolve the target name
+	// again. It's just a hint, resolver can ignore this if it's not necessary.
+	//
+	// It could be called multiple times concurrently.
+	ResolveNow(ResolveNowOptions)
+	// Close closes the resolver.
+	Close()
+}
+
+// UnregisterForTesting removes the resolver builder with the given scheme from the
+// resolver map.
+// This function is for testing only.
+func UnregisterForTesting(scheme string) {
+	delete(m, scheme)
+}