diff --git a/vendor/github.com/davecgh/go-spew/spew/doc.go b/vendor/github.com/davecgh/go-spew/spew/doc.go
new file mode 100644
index 0000000..aacaac6
--- /dev/null
+++ b/vendor/github.com/davecgh/go-spew/spew/doc.go
@@ -0,0 +1,211 @@
+/*
+ * Copyright (c) 2013-2016 Dave Collins <dave@davec.name>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+Package spew implements a deep pretty printer for Go data structures to aid in
+debugging.
+
+A quick overview of the additional features spew provides over the built-in
+printing facilities for Go data types are as follows:
+
+	* Pointers are dereferenced and followed
+	* Circular data structures are detected and handled properly
+	* Custom Stringer/error interfaces are optionally invoked, including
+	  on unexported types
+	* Custom types which only implement the Stringer/error interfaces via
+	  a pointer receiver are optionally invoked when passing non-pointer
+	  variables
+	* Byte arrays and slices are dumped like the hexdump -C command which
+	  includes offsets, byte values in hex, and ASCII output (only when using
+	  Dump style)
+
+There are two different approaches spew allows for dumping Go data structures:
+
+	* Dump style which prints with newlines, customizable indentation,
+	  and additional debug information such as types and all pointer addresses
+	  used to indirect to the final value
+	* A custom Formatter interface that integrates cleanly with the standard fmt
+	  package and replaces %v, %+v, %#v, and %#+v to provide inline printing
+	  similar to the default %v while providing the additional functionality
+	  outlined above and passing unsupported format verbs such as %x and %q
+	  along to fmt
+
+Quick Start
+
+This section demonstrates how to quickly get started with spew.  See the
+sections below for further details on formatting and configuration options.
+
+To dump a variable with full newlines, indentation, type, and pointer
+information use Dump, Fdump, or Sdump:
+	spew.Dump(myVar1, myVar2, ...)
+	spew.Fdump(someWriter, myVar1, myVar2, ...)
+	str := spew.Sdump(myVar1, myVar2, ...)
+
+Alternatively, if you would prefer to use format strings with a compacted inline
+printing style, use the convenience wrappers Printf, Fprintf, etc with
+%v (most compact), %+v (adds pointer addresses), %#v (adds types), or
+%#+v (adds types and pointer addresses):
+	spew.Printf("myVar1: %v -- myVar2: %+v", myVar1, myVar2)
+	spew.Printf("myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)
+	spew.Fprintf(someWriter, "myVar1: %v -- myVar2: %+v", myVar1, myVar2)
+	spew.Fprintf(someWriter, "myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)
+
+Configuration Options
+
+Configuration of spew is handled by fields in the ConfigState type.  For
+convenience, all of the top-level functions use a global state available
+via the spew.Config global.
+
+It is also possible to create a ConfigState instance that provides methods
+equivalent to the top-level functions.  This allows concurrent configuration
+options.  See the ConfigState documentation for more details.
+
+The following configuration options are available:
+	* Indent
+		String to use for each indentation level for Dump functions.
+		It is a single space by default.  A popular alternative is "\t".
+
+	* MaxDepth
+		Maximum number of levels to descend into nested data structures.
+		There is no limit by default.
+
+	* DisableMethods
+		Disables invocation of error and Stringer interface methods.
+		Method invocation is enabled by default.
+
+	* DisablePointerMethods
+		Disables invocation of error and Stringer interface methods on types
+		which only accept pointer receivers from non-pointer variables.
+		Pointer method invocation is enabled by default.
+
+	* DisablePointerAddresses
+		DisablePointerAddresses specifies whether to disable the printing of
+		pointer addresses. This is useful when diffing data structures in tests.
+
+	* DisableCapacities
+		DisableCapacities specifies whether to disable the printing of
+		capacities for arrays, slices, maps and channels. This is useful when
+		diffing data structures in tests.
+
+	* ContinueOnMethod
+		Enables recursion into types after invoking error and Stringer interface
+		methods. Recursion after method invocation is disabled by default.
+
+	* SortKeys
+		Specifies map keys should be sorted before being printed. Use
+		this to have a more deterministic, diffable output.  Note that
+		only native types (bool, int, uint, floats, uintptr and string)
+		and types which implement error or Stringer interfaces are
+		supported with other types sorted according to the
+		reflect.Value.String() output which guarantees display
+		stability.  Natural map order is used by default.
+
+	* SpewKeys
+		Specifies that, as a last resort attempt, map keys should be
+		spewed to strings and sorted by those strings.  This is only
+		considered if SortKeys is true.
+
+Dump Usage
+
+Simply call spew.Dump with a list of variables you want to dump:
+
+	spew.Dump(myVar1, myVar2, ...)
+
+You may also call spew.Fdump if you would prefer to output to an arbitrary
+io.Writer.  For example, to dump to standard error:
+
+	spew.Fdump(os.Stderr, myVar1, myVar2, ...)
+
+A third option is to call spew.Sdump to get the formatted output as a string:
+
+	str := spew.Sdump(myVar1, myVar2, ...)
+
+Sample Dump Output
+
+See the Dump example for details on the setup of the types and variables being
+shown here.
+
+	(main.Foo) {
+	 unexportedField: (*main.Bar)(0xf84002e210)({
+	  flag: (main.Flag) flagTwo,
+	  data: (uintptr) <nil>
+	 }),
+	 ExportedField: (map[interface {}]interface {}) (len=1) {
+	  (string) (len=3) "one": (bool) true
+	 }
+	}
+
+Byte (and uint8) arrays and slices are displayed uniquely like the hexdump -C
+command as shown.
+	([]uint8) (len=32 cap=32) {
+	 00000000  11 12 13 14 15 16 17 18  19 1a 1b 1c 1d 1e 1f 20  |............... |
+	 00000010  21 22 23 24 25 26 27 28  29 2a 2b 2c 2d 2e 2f 30  |!"#$%&'()*+,-./0|
+	 00000020  31 32                                             |12|
+	}
+
+Custom Formatter
+
+Spew provides a custom formatter that implements the fmt.Formatter interface
+so that it integrates cleanly with standard fmt package printing functions. The
+formatter is useful for inline printing of smaller data types similar to the
+standard %v format specifier.
+
+The custom formatter only responds to the %v (most compact), %+v (adds pointer
+addresses), %#v (adds types), or %#+v (adds types and pointer addresses) verb
+combinations.  Any other verbs such as %x and %q will be sent to the the
+standard fmt package for formatting.  In addition, the custom formatter ignores
+the width and precision arguments (however they will still work on the format
+specifiers not handled by the custom formatter).
+
+Custom Formatter Usage
+
+The simplest way to make use of the spew custom formatter is to call one of the
+convenience functions such as spew.Printf, spew.Println, or spew.Printf.  The
+functions have syntax you are most likely already familiar with:
+
+	spew.Printf("myVar1: %v -- myVar2: %+v", myVar1, myVar2)
+	spew.Printf("myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)
+	spew.Println(myVar, myVar2)
+	spew.Fprintf(os.Stderr, "myVar1: %v -- myVar2: %+v", myVar1, myVar2)
+	spew.Fprintf(os.Stderr, "myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)
+
+See the Index for the full list convenience functions.
+
+Sample Formatter Output
+
+Double pointer to a uint8:
+	  %v: <**>5
+	 %+v: <**>(0xf8400420d0->0xf8400420c8)5
+	 %#v: (**uint8)5
+	%#+v: (**uint8)(0xf8400420d0->0xf8400420c8)5
+
+Pointer to circular struct with a uint8 field and a pointer to itself:
+	  %v: <*>{1 <*><shown>}
+	 %+v: <*>(0xf84003e260){ui8:1 c:<*>(0xf84003e260)<shown>}
+	 %#v: (*main.circular){ui8:(uint8)1 c:(*main.circular)<shown>}
+	%#+v: (*main.circular)(0xf84003e260){ui8:(uint8)1 c:(*main.circular)(0xf84003e260)<shown>}
+
+See the Printf example for details on the setup of variables being shown
+here.
+
+Errors
+
+Since it is possible for custom Stringer/error interfaces to panic, spew
+detects them and handles them internally by printing the panic information
+inline with the output.  Since spew is intended to provide deep pretty printing
+capabilities on structures, it intentionally does not return any errors.
+*/
+package spew