diff --git a/vendor/github.com/opencord/voltha-lib-go/v2/pkg/log/log.go b/vendor/github.com/opencord/voltha-lib-go/v2/pkg/log/log.go
new file mode 100644
index 0000000..fe3a4e0
--- /dev/null
+++ b/vendor/github.com/opencord/voltha-lib-go/v2/pkg/log/log.go
@@ -0,0 +1,763 @@
+/*
+ * Copyright 2018-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//Package log provides a structured Logger interface implemented using zap logger. It provides the following capabilities:
+//1. Package level logging - a go package can register itself (AddPackage) and have a logger created for that package.
+//2. Dynamic log level change - for all registered packages (SetAllLogLevel)
+//3. Dynamic log level change - for a given package (SetPackageLogLevel)
+//4. Provides a default logger for unregistered packages
+//5. Allow key-value pairs to be added to a logger(UpdateLogger) or all loggers (UpdateAllLoggers) at run time
+//6. Add to the log output the location where the log was invoked (filename.functionname.linenumber)
+//
+// Using package-level logging (recommended approach).  In the examples below, log refers to this log package.
+// 1.  In the appropriate package add the following in the init section of the package.  The log level can be changed
+// and any number of default fields can be added as well. The log level specifies the lowest log level that will be
+// in the output while the fields will be automatically added to all log printouts.
+//
+//	log.AddPackage(mylog.JSON, log.WarnLevel, log.Fields{"anyFieldName": "any value"})
+//
+//2. In the calling package, just invoke any of the publicly available functions of the logger.  Here is an  example
+// to write an Info log with additional fields:
+//
+//log.Infow("An example", mylog.Fields{"myStringOutput": "output", "myIntOutput": 2})
+//
+//3. To dynamically change the log level, you can use 1)SetLogLevel from inside your package or 2) SetPackageLogLevel
+// from anywhere or 3)  SetAllLogLevel from anywhere.
+//
+
+package log
+
+import (
+	"errors"
+	"fmt"
+	zp "go.uber.org/zap"
+	zc "go.uber.org/zap/zapcore"
+	"path"
+	"runtime"
+	"strings"
+)
+
+const (
+	// DebugLevel logs a message at debug level
+	DebugLevel = iota
+	// InfoLevel logs a message at info level
+	InfoLevel
+	// WarnLevel logs a message at warning level
+	WarnLevel
+	// ErrorLevel logs a message at error level
+	ErrorLevel
+	// PanicLevel logs a message, then panics.
+	PanicLevel
+	// FatalLevel logs a message, then calls os.Exit(1).
+	FatalLevel
+)
+
+// CONSOLE formats the log for the console, mostly used during development
+const CONSOLE = "console"
+
+// JSON formats the log using json format, mostly used by an automated logging system consumption
+const JSON = "json"
+
+// Logger represents an abstract logging interface.  Any logging implementation used
+// will need to abide by this interface
+type Logger interface {
+	Debug(...interface{})
+	Debugln(...interface{})
+	Debugf(string, ...interface{})
+	Debugw(string, Fields)
+
+	Info(...interface{})
+	Infoln(...interface{})
+	Infof(string, ...interface{})
+	Infow(string, Fields)
+
+	Warn(...interface{})
+	Warnln(...interface{})
+	Warnf(string, ...interface{})
+	Warnw(string, Fields)
+
+	Error(...interface{})
+	Errorln(...interface{})
+	Errorf(string, ...interface{})
+	Errorw(string, Fields)
+
+	Fatal(...interface{})
+	Fatalln(...interface{})
+	Fatalf(string, ...interface{})
+	Fatalw(string, Fields)
+
+	With(Fields) Logger
+
+	// The following are added to be able to use this logger as a gRPC LoggerV2 if needed
+	//
+	Warning(...interface{})
+	Warningln(...interface{})
+	Warningf(string, ...interface{})
+
+	// V reports whether verbosity level l is at least the requested verbose level.
+	V(l int) bool
+}
+
+// Fields is used as key-value pairs for structured logging
+type Fields map[string]interface{}
+
+var defaultLogger *logger
+var cfg zp.Config
+
+var loggers map[string]*logger
+var cfgs map[string]zp.Config
+
+type logger struct {
+	log    *zp.SugaredLogger
+	parent *zp.Logger
+}
+
+func intToAtomicLevel(l int) zp.AtomicLevel {
+	switch l {
+	case DebugLevel:
+		return zp.NewAtomicLevelAt(zc.DebugLevel)
+	case InfoLevel:
+		return zp.NewAtomicLevelAt(zc.InfoLevel)
+	case WarnLevel:
+		return zp.NewAtomicLevelAt(zc.WarnLevel)
+	case ErrorLevel:
+		return zp.NewAtomicLevelAt(zc.ErrorLevel)
+	case PanicLevel:
+		return zp.NewAtomicLevelAt(zc.PanicLevel)
+	case FatalLevel:
+		return zp.NewAtomicLevelAt(zc.FatalLevel)
+	}
+	return zp.NewAtomicLevelAt(zc.ErrorLevel)
+}
+
+func intToLevel(l int) zc.Level {
+	switch l {
+	case DebugLevel:
+		return zc.DebugLevel
+	case InfoLevel:
+		return zc.InfoLevel
+	case WarnLevel:
+		return zc.WarnLevel
+	case ErrorLevel:
+		return zc.ErrorLevel
+	case PanicLevel:
+		return zc.PanicLevel
+	case FatalLevel:
+		return zc.FatalLevel
+	}
+	return zc.ErrorLevel
+}
+
+func levelToInt(l zc.Level) int {
+	switch l {
+	case zc.DebugLevel:
+		return DebugLevel
+	case zc.InfoLevel:
+		return InfoLevel
+	case zc.WarnLevel:
+		return WarnLevel
+	case zc.ErrorLevel:
+		return ErrorLevel
+	case zc.PanicLevel:
+		return PanicLevel
+	case FatalLevel:
+		return FatalLevel
+	}
+	return ErrorLevel
+}
+
+func getDefaultConfig(outputType string, level int, defaultFields Fields) zp.Config {
+	return zp.Config{
+		Level:            intToAtomicLevel(level),
+		Encoding:         outputType,
+		Development:      true,
+		OutputPaths:      []string{"stdout"},
+		ErrorOutputPaths: []string{"stderr"},
+		InitialFields:    defaultFields,
+		EncoderConfig: zc.EncoderConfig{
+			LevelKey:       "level",
+			MessageKey:     "msg",
+			TimeKey:        "ts",
+			StacktraceKey:  "stacktrace",
+			LineEnding:     zc.DefaultLineEnding,
+			EncodeLevel:    zc.LowercaseLevelEncoder,
+			EncodeTime:     zc.ISO8601TimeEncoder,
+			EncodeDuration: zc.SecondsDurationEncoder,
+			EncodeCaller:   zc.ShortCallerEncoder,
+		},
+	}
+}
+
+// SetLogger needs to be invoked before the logger API can be invoked.  This function
+// initialize the default logger (zap's sugaredlogger)
+func SetDefaultLogger(outputType string, level int, defaultFields Fields) (Logger, error) {
+	// Build a custom config using zap
+	cfg = getDefaultConfig(outputType, level, defaultFields)
+
+	l, err := cfg.Build()
+	if err != nil {
+		return nil, err
+	}
+
+	defaultLogger = &logger{
+		log:    l.Sugar(),
+		parent: l,
+	}
+
+	return defaultLogger, nil
+}
+
+// AddPackage registers a package to the log map.  Each package gets its own logger which allows
+// its config (loglevel) to be changed dynamically without interacting with the other packages.
+// outputType is JSON, level is the lowest level log to output with this logger and defaultFields is a map of
+// key-value pairs to always add to the output.
+// Note: AddPackage also returns a reference to the actual logger.  If a calling package uses this reference directly
+//instead of using the publicly available functions in this log package then a number of functionalities will not
+// be available to it, notably log tracing with filename.functionname.linenumber annotation.
+//
+// pkgNames parameter should be used for testing only as this function detects the caller's package.
+func AddPackage(outputType string, level int, defaultFields Fields, pkgNames ...string) (Logger, error) {
+	if cfgs == nil {
+		cfgs = make(map[string]zp.Config)
+	}
+	if loggers == nil {
+		loggers = make(map[string]*logger)
+	}
+
+	var pkgName string
+	for _, name := range pkgNames {
+		pkgName = name
+		break
+	}
+	if pkgName == "" {
+		pkgName, _, _, _ = getCallerInfo()
+	}
+
+	if _, exist := loggers[pkgName]; exist {
+		return loggers[pkgName], nil
+	}
+
+	cfgs[pkgName] = getDefaultConfig(outputType, level, defaultFields)
+
+	l, err := cfgs[pkgName].Build()
+	if err != nil {
+		return nil, err
+	}
+
+	loggers[pkgName] = &logger{
+		log:    l.Sugar(),
+		parent: l,
+	}
+	return loggers[pkgName], nil
+}
+
+//UpdateAllLoggers create new loggers for all registered pacakges with the defaultFields.
+func UpdateAllLoggers(defaultFields Fields) error {
+	for pkgName, cfg := range cfgs {
+		for k, v := range defaultFields {
+			if cfg.InitialFields == nil {
+				cfg.InitialFields = make(map[string]interface{})
+			}
+			cfg.InitialFields[k] = v
+		}
+		l, err := cfg.Build()
+		if err != nil {
+			return err
+		}
+
+		loggers[pkgName] = &logger{
+			log:    l.Sugar(),
+			parent: l,
+		}
+	}
+	return nil
+}
+
+// Return a list of all packages that have individually-configured loggers
+func GetPackageNames() []string {
+	i := 0
+	keys := make([]string, len(loggers))
+	for k := range loggers {
+		keys[i] = k
+		i++
+	}
+	return keys
+}
+
+// UpdateLogger deletes the logger associated with a caller's package and creates a new logger with the
+// defaultFields.  If a calling package is holding on to a Logger reference obtained from AddPackage invocation, then
+// that package needs to invoke UpdateLogger if it needs to make changes to the default fields and obtain a new logger
+// reference
+func UpdateLogger(defaultFields Fields) (Logger, error) {
+	pkgName, _, _, _ := getCallerInfo()
+	if _, exist := loggers[pkgName]; !exist {
+		return nil, errors.New(fmt.Sprintf("package-%s-not-registered", pkgName))
+	}
+
+	// Build a new logger
+	if _, exist := cfgs[pkgName]; !exist {
+		return nil, errors.New(fmt.Sprintf("config-%s-not-registered", pkgName))
+	}
+
+	cfg := cfgs[pkgName]
+	for k, v := range defaultFields {
+		if cfg.InitialFields == nil {
+			cfg.InitialFields = make(map[string]interface{})
+		}
+		cfg.InitialFields[k] = v
+	}
+	l, err := cfg.Build()
+	if err != nil {
+		return nil, err
+	}
+
+	// Set the logger
+	loggers[pkgName] = &logger{
+		log:    l.Sugar(),
+		parent: l,
+	}
+	return loggers[pkgName], nil
+}
+
+func setLevel(cfg zp.Config, level int) {
+	switch level {
+	case DebugLevel:
+		cfg.Level.SetLevel(zc.DebugLevel)
+	case InfoLevel:
+		cfg.Level.SetLevel(zc.InfoLevel)
+	case WarnLevel:
+		cfg.Level.SetLevel(zc.WarnLevel)
+	case ErrorLevel:
+		cfg.Level.SetLevel(zc.ErrorLevel)
+	case PanicLevel:
+		cfg.Level.SetLevel(zc.PanicLevel)
+	case FatalLevel:
+		cfg.Level.SetLevel(zc.FatalLevel)
+	default:
+		cfg.Level.SetLevel(zc.ErrorLevel)
+	}
+}
+
+//SetPackageLogLevel dynamically sets the log level of a given package to level.  This is typically invoked at an
+// application level during debugging
+func SetPackageLogLevel(packageName string, level int) {
+	// Get proper config
+	if cfg, ok := cfgs[packageName]; ok {
+		setLevel(cfg, level)
+	}
+}
+
+//SetAllLogLevel sets the log level of all registered packages to level
+func SetAllLogLevel(level int) {
+	// Get proper config
+	for _, cfg := range cfgs {
+		setLevel(cfg, level)
+	}
+}
+
+//GetPackageLogLevel returns the current log level of a package.
+func GetPackageLogLevel(packageName ...string) (int, error) {
+	var name string
+	if len(packageName) == 1 {
+		name = packageName[0]
+	} else {
+		name, _, _, _ = getCallerInfo()
+	}
+	if cfg, ok := cfgs[name]; ok {
+		return levelToInt(cfg.Level.Level()), nil
+	}
+	return 0, errors.New(fmt.Sprintf("unknown-package-%s", name))
+}
+
+//GetDefaultLogLevel gets the log level used for packages that don't have specific loggers
+func GetDefaultLogLevel() int {
+	return levelToInt(cfg.Level.Level())
+}
+
+//SetLogLevel sets the log level for the logger corresponding to the caller's package
+func SetLogLevel(level int) error {
+	pkgName, _, _, _ := getCallerInfo()
+	if _, exist := cfgs[pkgName]; !exist {
+		return errors.New(fmt.Sprintf("unregistered-package-%s", pkgName))
+	}
+	cfg := cfgs[pkgName]
+	setLevel(cfg, level)
+	return nil
+}
+
+//SetDefaultLogLevel sets the log level used for packages that don't have specific loggers
+func SetDefaultLogLevel(level int) {
+	setLevel(cfg, level)
+}
+
+// CleanUp flushed any buffered log entries. Applications should take care to call
+// CleanUp before exiting.
+func CleanUp() error {
+	for _, logger := range loggers {
+		if logger != nil {
+			if logger.parent != nil {
+				if err := logger.parent.Sync(); err != nil {
+					return err
+				}
+			}
+		}
+	}
+	if defaultLogger != nil {
+		if defaultLogger.parent != nil {
+			if err := defaultLogger.parent.Sync(); err != nil {
+				return err
+			}
+		}
+	}
+	return nil
+}
+
+func getCallerInfo() (string, string, string, int) {
+	// Since the caller of a log function is one stack frame before (in terms of stack higher level) the log.go
+	// filename, then first look for the last log.go filename and then grab the caller info one level higher.
+	maxLevel := 3
+	skiplevel := 3 // Level with the most empirical success to see the last log.go stack frame.
+	pc := make([]uintptr, maxLevel)
+	n := runtime.Callers(skiplevel, pc)
+	packageName := ""
+	funcName := ""
+	fileName := ""
+	var line int
+	if n == 0 {
+		return packageName, fileName, funcName, line
+	}
+	frames := runtime.CallersFrames(pc[:n])
+	var frame runtime.Frame
+	var foundFrame runtime.Frame
+	more := true
+	for more {
+		frame, more = frames.Next()
+		_, fileName = path.Split(frame.File)
+		if fileName != "log.go" {
+			foundFrame = frame // First frame after log.go in the frame stack
+			break
+		}
+	}
+	parts := strings.Split(foundFrame.Function, ".")
+	pl := len(parts)
+	if pl >= 2 {
+		funcName = parts[pl-1]
+		if parts[pl-2][0] == '(' {
+			packageName = strings.Join(parts[0:pl-2], ".")
+		} else {
+			packageName = strings.Join(parts[0:pl-1], ".")
+		}
+	}
+
+	if strings.HasSuffix(packageName, ".init") {
+		packageName = strings.TrimSuffix(packageName, ".init")
+	}
+
+	if strings.HasSuffix(fileName, ".go") {
+		fileName = strings.TrimSuffix(fileName, ".go")
+	}
+
+	return packageName, fileName, funcName, foundFrame.Line
+}
+
+func getPackageLevelSugaredLogger() *zp.SugaredLogger {
+	pkgName, fileName, funcName, line := getCallerInfo()
+	if _, exist := loggers[pkgName]; exist {
+		return loggers[pkgName].log.With("caller", fmt.Sprintf("%s.%s:%d", fileName, funcName, line))
+	}
+	return defaultLogger.log.With("caller", fmt.Sprintf("%s.%s:%d", fileName, funcName, line))
+}
+
+func getPackageLevelLogger() Logger {
+	pkgName, _, _, _ := getCallerInfo()
+	if _, exist := loggers[pkgName]; exist {
+		return loggers[pkgName]
+	}
+	return defaultLogger
+}
+
+func serializeMap(fields Fields) []interface{} {
+	data := make([]interface{}, len(fields)*2)
+	i := 0
+	for k, v := range fields {
+		data[i] = k
+		data[i+1] = v
+		i = i + 2
+	}
+	return data
+}
+
+// With returns a logger initialized with the key-value pairs
+func (l logger) With(keysAndValues Fields) Logger {
+	return logger{log: l.log.With(serializeMap(keysAndValues)...), parent: l.parent}
+}
+
+// Debug logs a message at level Debug on the standard logger.
+func (l logger) Debug(args ...interface{}) {
+	l.log.Debug(args...)
+}
+
+// Debugln logs a message at level Debug on the standard logger with a line feed. Default in any case.
+func (l logger) Debugln(args ...interface{}) {
+	l.log.Debug(args...)
+}
+
+// Debugw logs a message at level Debug on the standard logger.
+func (l logger) Debugf(format string, args ...interface{}) {
+	l.log.Debugf(format, args...)
+}
+
+// Debugw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Debugw(msg string, keysAndValues Fields) {
+	l.log.Debugw(msg, serializeMap(keysAndValues)...)
+}
+
+// Info logs a message at level Info on the standard logger.
+func (l logger) Info(args ...interface{}) {
+	l.log.Info(args...)
+}
+
+// Infoln logs a message at level Info on the standard logger with a line feed. Default in any case.
+func (l logger) Infoln(args ...interface{}) {
+	l.log.Info(args...)
+	//msg := fmt.Sprintln(args...)
+	//l.sourced().Info(msg[:len(msg)-1])
+}
+
+// Infof logs a message at level Info on the standard logger.
+func (l logger) Infof(format string, args ...interface{}) {
+	l.log.Infof(format, args...)
+}
+
+// Infow logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Infow(msg string, keysAndValues Fields) {
+	l.log.Infow(msg, serializeMap(keysAndValues)...)
+}
+
+// Warn logs a message at level Warn on the standard logger.
+func (l logger) Warn(args ...interface{}) {
+	l.log.Warn(args...)
+}
+
+// Warnln logs a message at level Warn on the standard logger with a line feed. Default in any case.
+func (l logger) Warnln(args ...interface{}) {
+	l.log.Warn(args...)
+}
+
+// Warnf logs a message at level Warn on the standard logger.
+func (l logger) Warnf(format string, args ...interface{}) {
+	l.log.Warnf(format, args...)
+}
+
+// Warnw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Warnw(msg string, keysAndValues Fields) {
+	l.log.Warnw(msg, serializeMap(keysAndValues)...)
+}
+
+// Error logs a message at level Error on the standard logger.
+func (l logger) Error(args ...interface{}) {
+	l.log.Error(args...)
+}
+
+// Errorln logs a message at level Error on the standard logger with a line feed. Default in any case.
+func (l logger) Errorln(args ...interface{}) {
+	l.log.Error(args...)
+}
+
+// Errorf logs a message at level Error on the standard logger.
+func (l logger) Errorf(format string, args ...interface{}) {
+	l.log.Errorf(format, args...)
+}
+
+// Errorw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Errorw(msg string, keysAndValues Fields) {
+	l.log.Errorw(msg, serializeMap(keysAndValues)...)
+}
+
+// Fatal logs a message at level Fatal on the standard logger.
+func (l logger) Fatal(args ...interface{}) {
+	l.log.Fatal(args...)
+}
+
+// Fatalln logs a message at level Fatal on the standard logger with a line feed. Default in any case.
+func (l logger) Fatalln(args ...interface{}) {
+	l.log.Fatal(args...)
+}
+
+// Fatalf logs a message at level Fatal on the standard logger.
+func (l logger) Fatalf(format string, args ...interface{}) {
+	l.log.Fatalf(format, args...)
+}
+
+// Fatalw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Fatalw(msg string, keysAndValues Fields) {
+	l.log.Fatalw(msg, serializeMap(keysAndValues)...)
+}
+
+// Warning logs a message at level Warn on the standard logger.
+func (l logger) Warning(args ...interface{}) {
+	l.log.Warn(args...)
+}
+
+// Warningln logs a message at level Warn on the standard logger with a line feed. Default in any case.
+func (l logger) Warningln(args ...interface{}) {
+	l.log.Warn(args...)
+}
+
+// Warningf logs a message at level Warn on the standard logger.
+func (l logger) Warningf(format string, args ...interface{}) {
+	l.log.Warnf(format, args...)
+}
+
+// V reports whether verbosity level l is at least the requested verbose level.
+func (l logger) V(level int) bool {
+	return l.parent.Core().Enabled(intToLevel(level))
+}
+
+// With returns a logger initialized with the key-value pairs
+func With(keysAndValues Fields) Logger {
+	return logger{log: getPackageLevelSugaredLogger().With(serializeMap(keysAndValues)...), parent: defaultLogger.parent}
+}
+
+// Debug logs a message at level Debug on the standard logger.
+func Debug(args ...interface{}) {
+	getPackageLevelSugaredLogger().Debug(args...)
+}
+
+// Debugln logs a message at level Debug on the standard logger.
+func Debugln(args ...interface{}) {
+	getPackageLevelSugaredLogger().Debug(args...)
+}
+
+// Debugf logs a message at level Debug on the standard logger.
+func Debugf(format string, args ...interface{}) {
+	getPackageLevelSugaredLogger().Debugf(format, args...)
+}
+
+// Debugw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func Debugw(msg string, keysAndValues Fields) {
+	getPackageLevelSugaredLogger().Debugw(msg, serializeMap(keysAndValues)...)
+}
+
+// Info logs a message at level Info on the standard logger.
+func Info(args ...interface{}) {
+	getPackageLevelSugaredLogger().Info(args...)
+}
+
+// Infoln logs a message at level Info on the standard logger.
+func Infoln(args ...interface{}) {
+	getPackageLevelSugaredLogger().Info(args...)
+}
+
+// Infof logs a message at level Info on the standard logger.
+func Infof(format string, args ...interface{}) {
+	getPackageLevelSugaredLogger().Infof(format, args...)
+}
+
+//Infow logs a message with some additional context. The variadic key-value
+//pairs are treated as they are in With.
+func Infow(msg string, keysAndValues Fields) {
+	getPackageLevelSugaredLogger().Infow(msg, serializeMap(keysAndValues)...)
+}
+
+// Warn logs a message at level Warn on the standard logger.
+func Warn(args ...interface{}) {
+	getPackageLevelSugaredLogger().Warn(args...)
+}
+
+// Warnln logs a message at level Warn on the standard logger.
+func Warnln(args ...interface{}) {
+	getPackageLevelSugaredLogger().Warn(args...)
+}
+
+// Warnf logs a message at level Warn on the standard logger.
+func Warnf(format string, args ...interface{}) {
+	getPackageLevelSugaredLogger().Warnf(format, args...)
+}
+
+// Warnw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func Warnw(msg string, keysAndValues Fields) {
+	getPackageLevelSugaredLogger().Warnw(msg, serializeMap(keysAndValues)...)
+}
+
+// Error logs a message at level Error on the standard logger.
+func Error(args ...interface{}) {
+	getPackageLevelSugaredLogger().Error(args...)
+}
+
+// Errorln logs a message at level Error on the standard logger.
+func Errorln(args ...interface{}) {
+	getPackageLevelSugaredLogger().Error(args...)
+}
+
+// Errorf logs a message at level Error on the standard logger.
+func Errorf(format string, args ...interface{}) {
+	getPackageLevelSugaredLogger().Errorf(format, args...)
+}
+
+// Errorw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func Errorw(msg string, keysAndValues Fields) {
+	getPackageLevelSugaredLogger().Errorw(msg, serializeMap(keysAndValues)...)
+}
+
+// Fatal logs a message at level Fatal on the standard logger.
+func Fatal(args ...interface{}) {
+	getPackageLevelSugaredLogger().Fatal(args...)
+}
+
+// Fatalln logs a message at level Fatal on the standard logger.
+func Fatalln(args ...interface{}) {
+	getPackageLevelSugaredLogger().Fatal(args...)
+}
+
+// Fatalf logs a message at level Fatal on the standard logger.
+func Fatalf(format string, args ...interface{}) {
+	getPackageLevelSugaredLogger().Fatalf(format, args...)
+}
+
+// Fatalw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func Fatalw(msg string, keysAndValues Fields) {
+	getPackageLevelSugaredLogger().Fatalw(msg, serializeMap(keysAndValues)...)
+}
+
+// Warning logs a message at level Warn on the standard logger.
+func Warning(args ...interface{}) {
+	getPackageLevelSugaredLogger().Warn(args...)
+}
+
+// Warningln logs a message at level Warn on the standard logger.
+func Warningln(args ...interface{}) {
+	getPackageLevelSugaredLogger().Warn(args...)
+}
+
+// Warningf logs a message at level Warn on the standard logger.
+func Warningf(format string, args ...interface{}) {
+	getPackageLevelSugaredLogger().Warnf(format, args...)
+}
+
+// V reports whether verbosity level l is at least the requested verbose level.
+func V(level int) bool {
+	return getPackageLevelLogger().V(level)
+}