diff --git a/vendor/github.com/golang/protobuf/ptypes/any.go b/vendor/github.com/golang/protobuf/ptypes/any.go
new file mode 100644
index 0000000..70276e8
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/any.go
@@ -0,0 +1,141 @@
+// Go support for Protocol Buffers - Google's data interchange format
+//
+// Copyright 2016 The Go Authors.  All rights reserved.
+// https://github.com/golang/protobuf
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+package ptypes
+
+// This file implements functions to marshal proto.Message to/from
+// google.protobuf.Any message.
+
+import (
+	"fmt"
+	"reflect"
+	"strings"
+
+	"github.com/golang/protobuf/proto"
+	"github.com/golang/protobuf/ptypes/any"
+)
+
+const googleApis = "type.googleapis.com/"
+
+// AnyMessageName returns the name of the message contained in a google.protobuf.Any message.
+//
+// Note that regular type assertions should be done using the Is
+// function. AnyMessageName is provided for less common use cases like filtering a
+// sequence of Any messages based on a set of allowed message type names.
+func AnyMessageName(any *any.Any) (string, error) {
+	if any == nil {
+		return "", fmt.Errorf("message is nil")
+	}
+	slash := strings.LastIndex(any.TypeUrl, "/")
+	if slash < 0 {
+		return "", fmt.Errorf("message type url %q is invalid", any.TypeUrl)
+	}
+	return any.TypeUrl[slash+1:], nil
+}
+
+// MarshalAny takes the protocol buffer and encodes it into google.protobuf.Any.
+func MarshalAny(pb proto.Message) (*any.Any, error) {
+	value, err := proto.Marshal(pb)
+	if err != nil {
+		return nil, err
+	}
+	return &any.Any{TypeUrl: googleApis + proto.MessageName(pb), Value: value}, nil
+}
+
+// DynamicAny is a value that can be passed to UnmarshalAny to automatically
+// allocate a proto.Message for the type specified in a google.protobuf.Any
+// message. The allocated message is stored in the embedded proto.Message.
+//
+// Example:
+//
+//   var x ptypes.DynamicAny
+//   if err := ptypes.UnmarshalAny(a, &x); err != nil { ... }
+//   fmt.Printf("unmarshaled message: %v", x.Message)
+type DynamicAny struct {
+	proto.Message
+}
+
+// Empty returns a new proto.Message of the type specified in a
+// google.protobuf.Any message. It returns an error if corresponding message
+// type isn't linked in.
+func Empty(any *any.Any) (proto.Message, error) {
+	aname, err := AnyMessageName(any)
+	if err != nil {
+		return nil, err
+	}
+
+	t := proto.MessageType(aname)
+	if t == nil {
+		return nil, fmt.Errorf("any: message type %q isn't linked in", aname)
+	}
+	return reflect.New(t.Elem()).Interface().(proto.Message), nil
+}
+
+// UnmarshalAny parses the protocol buffer representation in a google.protobuf.Any
+// message and places the decoded result in pb. It returns an error if type of
+// contents of Any message does not match type of pb message.
+//
+// pb can be a proto.Message, or a *DynamicAny.
+func UnmarshalAny(any *any.Any, pb proto.Message) error {
+	if d, ok := pb.(*DynamicAny); ok {
+		if d.Message == nil {
+			var err error
+			d.Message, err = Empty(any)
+			if err != nil {
+				return err
+			}
+		}
+		return UnmarshalAny(any, d.Message)
+	}
+
+	aname, err := AnyMessageName(any)
+	if err != nil {
+		return err
+	}
+
+	mname := proto.MessageName(pb)
+	if aname != mname {
+		return fmt.Errorf("mismatched message type: got %q want %q", aname, mname)
+	}
+	return proto.Unmarshal(any.Value, pb)
+}
+
+// Is returns true if any value contains a given message type.
+func Is(any *any.Any, pb proto.Message) bool {
+	// The following is equivalent to AnyMessageName(any) == proto.MessageName(pb),
+	// but it avoids scanning TypeUrl for the slash.
+	if any == nil {
+		return false
+	}
+	name := proto.MessageName(pb)
+	prefix := len(any.TypeUrl) - len(name)
+	return prefix >= 1 && any.TypeUrl[prefix-1] == '/' && any.TypeUrl[prefix:] == name
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/any/any.pb.go b/vendor/github.com/golang/protobuf/ptypes/any/any.pb.go
new file mode 100644
index 0000000..78ee523
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/any/any.pb.go
@@ -0,0 +1,200 @@
+// Code generated by protoc-gen-go. DO NOT EDIT.
+// source: google/protobuf/any.proto
+
+package any
+
+import (
+	fmt "fmt"
+	proto "github.com/golang/protobuf/proto"
+	math "math"
+)
+
+// Reference imports to suppress errors if they are not otherwise used.
+var _ = proto.Marshal
+var _ = fmt.Errorf
+var _ = math.Inf
+
+// This is a compile-time assertion to ensure that this generated file
+// is compatible with the proto package it is being compiled against.
+// A compilation error at this line likely means your copy of the
+// proto package needs to be updated.
+const _ = proto.ProtoPackageIsVersion3 // please upgrade the proto package
+
+// `Any` contains an arbitrary serialized protocol buffer message along with a
+// URL that describes the type of the serialized message.
+//
+// Protobuf library provides support to pack/unpack Any values in the form
+// of utility functions or additional generated methods of the Any type.
+//
+// Example 1: Pack and unpack a message in C++.
+//
+//     Foo foo = ...;
+//     Any any;
+//     any.PackFrom(foo);
+//     ...
+//     if (any.UnpackTo(&foo)) {
+//       ...
+//     }
+//
+// Example 2: Pack and unpack a message in Java.
+//
+//     Foo foo = ...;
+//     Any any = Any.pack(foo);
+//     ...
+//     if (any.is(Foo.class)) {
+//       foo = any.unpack(Foo.class);
+//     }
+//
+//  Example 3: Pack and unpack a message in Python.
+//
+//     foo = Foo(...)
+//     any = Any()
+//     any.Pack(foo)
+//     ...
+//     if any.Is(Foo.DESCRIPTOR):
+//       any.Unpack(foo)
+//       ...
+//
+//  Example 4: Pack and unpack a message in Go
+//
+//      foo := &pb.Foo{...}
+//      any, err := ptypes.MarshalAny(foo)
+//      ...
+//      foo := &pb.Foo{}
+//      if err := ptypes.UnmarshalAny(any, foo); err != nil {
+//        ...
+//      }
+//
+// The pack methods provided by protobuf library will by default use
+// 'type.googleapis.com/full.type.name' as the type URL and the unpack
+// methods only use the fully qualified type name after the last '/'
+// in the type URL, for example "foo.bar.com/x/y.z" will yield type
+// name "y.z".
+//
+//
+// JSON
+// ====
+// The JSON representation of an `Any` value uses the regular
+// representation of the deserialized, embedded message, with an
+// additional field `@type` which contains the type URL. Example:
+//
+//     package google.profile;
+//     message Person {
+//       string first_name = 1;
+//       string last_name = 2;
+//     }
+//
+//     {
+//       "@type": "type.googleapis.com/google.profile.Person",
+//       "firstName": <string>,
+//       "lastName": <string>
+//     }
+//
+// If the embedded message type is well-known and has a custom JSON
+// representation, that representation will be embedded adding a field
+// `value` which holds the custom JSON in addition to the `@type`
+// field. Example (for message [google.protobuf.Duration][]):
+//
+//     {
+//       "@type": "type.googleapis.com/google.protobuf.Duration",
+//       "value": "1.212s"
+//     }
+//
+type Any struct {
+	// A URL/resource name that uniquely identifies the type of the serialized
+	// protocol buffer message. The last segment of the URL's path must represent
+	// the fully qualified name of the type (as in
+	// `path/google.protobuf.Duration`). The name should be in a canonical form
+	// (e.g., leading "." is not accepted).
+	//
+	// In practice, teams usually precompile into the binary all types that they
+	// expect it to use in the context of Any. However, for URLs which use the
+	// scheme `http`, `https`, or no scheme, one can optionally set up a type
+	// server that maps type URLs to message definitions as follows:
+	//
+	// * If no scheme is provided, `https` is assumed.
+	// * An HTTP GET on the URL must yield a [google.protobuf.Type][]
+	//   value in binary format, or produce an error.
+	// * Applications are allowed to cache lookup results based on the
+	//   URL, or have them precompiled into a binary to avoid any
+	//   lookup. Therefore, binary compatibility needs to be preserved
+	//   on changes to types. (Use versioned type names to manage
+	//   breaking changes.)
+	//
+	// Note: this functionality is not currently available in the official
+	// protobuf release, and it is not used for type URLs beginning with
+	// type.googleapis.com.
+	//
+	// Schemes other than `http`, `https` (or the empty scheme) might be
+	// used with implementation specific semantics.
+	//
+	TypeUrl string `protobuf:"bytes,1,opt,name=type_url,json=typeUrl,proto3" json:"type_url,omitempty"`
+	// Must be a valid serialized protocol buffer of the above specified type.
+	Value                []byte   `protobuf:"bytes,2,opt,name=value,proto3" json:"value,omitempty"`
+	XXX_NoUnkeyedLiteral struct{} `json:"-"`
+	XXX_unrecognized     []byte   `json:"-"`
+	XXX_sizecache        int32    `json:"-"`
+}
+
+func (m *Any) Reset()         { *m = Any{} }
+func (m *Any) String() string { return proto.CompactTextString(m) }
+func (*Any) ProtoMessage()    {}
+func (*Any) Descriptor() ([]byte, []int) {
+	return fileDescriptor_b53526c13ae22eb4, []int{0}
+}
+
+func (*Any) XXX_WellKnownType() string { return "Any" }
+
+func (m *Any) XXX_Unmarshal(b []byte) error {
+	return xxx_messageInfo_Any.Unmarshal(m, b)
+}
+func (m *Any) XXX_Marshal(b []byte, deterministic bool) ([]byte, error) {
+	return xxx_messageInfo_Any.Marshal(b, m, deterministic)
+}
+func (m *Any) XXX_Merge(src proto.Message) {
+	xxx_messageInfo_Any.Merge(m, src)
+}
+func (m *Any) XXX_Size() int {
+	return xxx_messageInfo_Any.Size(m)
+}
+func (m *Any) XXX_DiscardUnknown() {
+	xxx_messageInfo_Any.DiscardUnknown(m)
+}
+
+var xxx_messageInfo_Any proto.InternalMessageInfo
+
+func (m *Any) GetTypeUrl() string {
+	if m != nil {
+		return m.TypeUrl
+	}
+	return ""
+}
+
+func (m *Any) GetValue() []byte {
+	if m != nil {
+		return m.Value
+	}
+	return nil
+}
+
+func init() {
+	proto.RegisterType((*Any)(nil), "google.protobuf.Any")
+}
+
+func init() { proto.RegisterFile("google/protobuf/any.proto", fileDescriptor_b53526c13ae22eb4) }
+
+var fileDescriptor_b53526c13ae22eb4 = []byte{
+	// 185 bytes of a gzipped FileDescriptorProto
+	0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xff, 0xe2, 0x92, 0x4c, 0xcf, 0xcf, 0x4f,
+	0xcf, 0x49, 0xd5, 0x2f, 0x28, 0xca, 0x2f, 0xc9, 0x4f, 0x2a, 0x4d, 0xd3, 0x4f, 0xcc, 0xab, 0xd4,
+	0x03, 0x73, 0x84, 0xf8, 0x21, 0x52, 0x7a, 0x30, 0x29, 0x25, 0x33, 0x2e, 0x66, 0xc7, 0xbc, 0x4a,
+	0x21, 0x49, 0x2e, 0x8e, 0x92, 0xca, 0x82, 0xd4, 0xf8, 0xd2, 0xa2, 0x1c, 0x09, 0x46, 0x05, 0x46,
+	0x0d, 0xce, 0x20, 0x76, 0x10, 0x3f, 0xb4, 0x28, 0x47, 0x48, 0x84, 0x8b, 0xb5, 0x2c, 0x31, 0xa7,
+	0x34, 0x55, 0x82, 0x49, 0x81, 0x51, 0x83, 0x27, 0x08, 0xc2, 0x71, 0xca, 0xe7, 0x12, 0x4e, 0xce,
+	0xcf, 0xd5, 0x43, 0x33, 0xce, 0x89, 0xc3, 0x31, 0xaf, 0x32, 0x00, 0xc4, 0x09, 0x60, 0x8c, 0x52,
+	0x4d, 0xcf, 0x2c, 0xc9, 0x28, 0x4d, 0xd2, 0x4b, 0xce, 0xcf, 0xd5, 0x4f, 0xcf, 0xcf, 0x49, 0xcc,
+	0x4b, 0x47, 0xb8, 0xa8, 0x00, 0x64, 0x7a, 0x31, 0xc8, 0x61, 0x8b, 0x98, 0x98, 0xdd, 0x03, 0x9c,
+	0x56, 0x31, 0xc9, 0xb9, 0x43, 0x8c, 0x0a, 0x80, 0x2a, 0xd1, 0x0b, 0x4f, 0xcd, 0xc9, 0xf1, 0xce,
+	0xcb, 0x2f, 0xcf, 0x0b, 0x01, 0x29, 0x4d, 0x62, 0x03, 0xeb, 0x35, 0x06, 0x04, 0x00, 0x00, 0xff,
+	0xff, 0x13, 0xf8, 0xe8, 0x42, 0xdd, 0x00, 0x00, 0x00,
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/any/any.proto b/vendor/github.com/golang/protobuf/ptypes/any/any.proto
new file mode 100644
index 0000000..4932942
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/any/any.proto
@@ -0,0 +1,154 @@
+// Protocol Buffers - Google's data interchange format
+// Copyright 2008 Google Inc.  All rights reserved.
+// https://developers.google.com/protocol-buffers/
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+syntax = "proto3";
+
+package google.protobuf;
+
+option csharp_namespace = "Google.Protobuf.WellKnownTypes";
+option go_package = "github.com/golang/protobuf/ptypes/any";
+option java_package = "com.google.protobuf";
+option java_outer_classname = "AnyProto";
+option java_multiple_files = true;
+option objc_class_prefix = "GPB";
+
+// `Any` contains an arbitrary serialized protocol buffer message along with a
+// URL that describes the type of the serialized message.
+//
+// Protobuf library provides support to pack/unpack Any values in the form
+// of utility functions or additional generated methods of the Any type.
+//
+// Example 1: Pack and unpack a message in C++.
+//
+//     Foo foo = ...;
+//     Any any;
+//     any.PackFrom(foo);
+//     ...
+//     if (any.UnpackTo(&foo)) {
+//       ...
+//     }
+//
+// Example 2: Pack and unpack a message in Java.
+//
+//     Foo foo = ...;
+//     Any any = Any.pack(foo);
+//     ...
+//     if (any.is(Foo.class)) {
+//       foo = any.unpack(Foo.class);
+//     }
+//
+//  Example 3: Pack and unpack a message in Python.
+//
+//     foo = Foo(...)
+//     any = Any()
+//     any.Pack(foo)
+//     ...
+//     if any.Is(Foo.DESCRIPTOR):
+//       any.Unpack(foo)
+//       ...
+//
+//  Example 4: Pack and unpack a message in Go
+//
+//      foo := &pb.Foo{...}
+//      any, err := ptypes.MarshalAny(foo)
+//      ...
+//      foo := &pb.Foo{}
+//      if err := ptypes.UnmarshalAny(any, foo); err != nil {
+//        ...
+//      }
+//
+// The pack methods provided by protobuf library will by default use
+// 'type.googleapis.com/full.type.name' as the type URL and the unpack
+// methods only use the fully qualified type name after the last '/'
+// in the type URL, for example "foo.bar.com/x/y.z" will yield type
+// name "y.z".
+//
+//
+// JSON
+// ====
+// The JSON representation of an `Any` value uses the regular
+// representation of the deserialized, embedded message, with an
+// additional field `@type` which contains the type URL. Example:
+//
+//     package google.profile;
+//     message Person {
+//       string first_name = 1;
+//       string last_name = 2;
+//     }
+//
+//     {
+//       "@type": "type.googleapis.com/google.profile.Person",
+//       "firstName": <string>,
+//       "lastName": <string>
+//     }
+//
+// If the embedded message type is well-known and has a custom JSON
+// representation, that representation will be embedded adding a field
+// `value` which holds the custom JSON in addition to the `@type`
+// field. Example (for message [google.protobuf.Duration][]):
+//
+//     {
+//       "@type": "type.googleapis.com/google.protobuf.Duration",
+//       "value": "1.212s"
+//     }
+//
+message Any {
+  // A URL/resource name that uniquely identifies the type of the serialized
+  // protocol buffer message. The last segment of the URL's path must represent
+  // the fully qualified name of the type (as in
+  // `path/google.protobuf.Duration`). The name should be in a canonical form
+  // (e.g., leading "." is not accepted).
+  //
+  // In practice, teams usually precompile into the binary all types that they
+  // expect it to use in the context of Any. However, for URLs which use the
+  // scheme `http`, `https`, or no scheme, one can optionally set up a type
+  // server that maps type URLs to message definitions as follows:
+  //
+  // * If no scheme is provided, `https` is assumed.
+  // * An HTTP GET on the URL must yield a [google.protobuf.Type][]
+  //   value in binary format, or produce an error.
+  // * Applications are allowed to cache lookup results based on the
+  //   URL, or have them precompiled into a binary to avoid any
+  //   lookup. Therefore, binary compatibility needs to be preserved
+  //   on changes to types. (Use versioned type names to manage
+  //   breaking changes.)
+  //
+  // Note: this functionality is not currently available in the official
+  // protobuf release, and it is not used for type URLs beginning with
+  // type.googleapis.com.
+  //
+  // Schemes other than `http`, `https` (or the empty scheme) might be
+  // used with implementation specific semantics.
+  //
+  string type_url = 1;
+
+  // Must be a valid serialized protocol buffer of the above specified type.
+  bytes value = 2;
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/doc.go b/vendor/github.com/golang/protobuf/ptypes/doc.go
new file mode 100644
index 0000000..c0d595d
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/doc.go
@@ -0,0 +1,35 @@
+// Go support for Protocol Buffers - Google's data interchange format
+//
+// Copyright 2016 The Go Authors.  All rights reserved.
+// https://github.com/golang/protobuf
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+/*
+Package ptypes contains code for interacting with well-known types.
+*/
+package ptypes
diff --git a/vendor/github.com/golang/protobuf/ptypes/duration.go b/vendor/github.com/golang/protobuf/ptypes/duration.go
new file mode 100644
index 0000000..26d1ca2
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/duration.go
@@ -0,0 +1,102 @@
+// Go support for Protocol Buffers - Google's data interchange format
+//
+// Copyright 2016 The Go Authors.  All rights reserved.
+// https://github.com/golang/protobuf
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+package ptypes
+
+// This file implements conversions between google.protobuf.Duration
+// and time.Duration.
+
+import (
+	"errors"
+	"fmt"
+	"time"
+
+	durpb "github.com/golang/protobuf/ptypes/duration"
+)
+
+const (
+	// Range of a durpb.Duration in seconds, as specified in
+	// google/protobuf/duration.proto. This is about 10,000 years in seconds.
+	maxSeconds = int64(10000 * 365.25 * 24 * 60 * 60)
+	minSeconds = -maxSeconds
+)
+
+// validateDuration determines whether the durpb.Duration is valid according to the
+// definition in google/protobuf/duration.proto. A valid durpb.Duration
+// may still be too large to fit into a time.Duration (the range of durpb.Duration
+// is about 10,000 years, and the range of time.Duration is about 290).
+func validateDuration(d *durpb.Duration) error {
+	if d == nil {
+		return errors.New("duration: nil Duration")
+	}
+	if d.Seconds < minSeconds || d.Seconds > maxSeconds {
+		return fmt.Errorf("duration: %v: seconds out of range", d)
+	}
+	if d.Nanos <= -1e9 || d.Nanos >= 1e9 {
+		return fmt.Errorf("duration: %v: nanos out of range", d)
+	}
+	// Seconds and Nanos must have the same sign, unless d.Nanos is zero.
+	if (d.Seconds < 0 && d.Nanos > 0) || (d.Seconds > 0 && d.Nanos < 0) {
+		return fmt.Errorf("duration: %v: seconds and nanos have different signs", d)
+	}
+	return nil
+}
+
+// Duration converts a durpb.Duration to a time.Duration. Duration
+// returns an error if the durpb.Duration is invalid or is too large to be
+// represented in a time.Duration.
+func Duration(p *durpb.Duration) (time.Duration, error) {
+	if err := validateDuration(p); err != nil {
+		return 0, err
+	}
+	d := time.Duration(p.Seconds) * time.Second
+	if int64(d/time.Second) != p.Seconds {
+		return 0, fmt.Errorf("duration: %v is out of range for time.Duration", p)
+	}
+	if p.Nanos != 0 {
+		d += time.Duration(p.Nanos) * time.Nanosecond
+		if (d < 0) != (p.Nanos < 0) {
+			return 0, fmt.Errorf("duration: %v is out of range for time.Duration", p)
+		}
+	}
+	return d, nil
+}
+
+// DurationProto converts a time.Duration to a durpb.Duration.
+func DurationProto(d time.Duration) *durpb.Duration {
+	nanos := d.Nanoseconds()
+	secs := nanos / 1e9
+	nanos -= secs * 1e9
+	return &durpb.Duration{
+		Seconds: secs,
+		Nanos:   int32(nanos),
+	}
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/duration/duration.pb.go b/vendor/github.com/golang/protobuf/ptypes/duration/duration.pb.go
new file mode 100644
index 0000000..0d681ee
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/duration/duration.pb.go
@@ -0,0 +1,161 @@
+// Code generated by protoc-gen-go. DO NOT EDIT.
+// source: google/protobuf/duration.proto
+
+package duration
+
+import (
+	fmt "fmt"
+	proto "github.com/golang/protobuf/proto"
+	math "math"
+)
+
+// Reference imports to suppress errors if they are not otherwise used.
+var _ = proto.Marshal
+var _ = fmt.Errorf
+var _ = math.Inf
+
+// This is a compile-time assertion to ensure that this generated file
+// is compatible with the proto package it is being compiled against.
+// A compilation error at this line likely means your copy of the
+// proto package needs to be updated.
+const _ = proto.ProtoPackageIsVersion3 // please upgrade the proto package
+
+// A Duration represents a signed, fixed-length span of time represented
+// as a count of seconds and fractions of seconds at nanosecond
+// resolution. It is independent of any calendar and concepts like "day"
+// or "month". It is related to Timestamp in that the difference between
+// two Timestamp values is a Duration and it can be added or subtracted
+// from a Timestamp. Range is approximately +-10,000 years.
+//
+// # Examples
+//
+// Example 1: Compute Duration from two Timestamps in pseudo code.
+//
+//     Timestamp start = ...;
+//     Timestamp end = ...;
+//     Duration duration = ...;
+//
+//     duration.seconds = end.seconds - start.seconds;
+//     duration.nanos = end.nanos - start.nanos;
+//
+//     if (duration.seconds < 0 && duration.nanos > 0) {
+//       duration.seconds += 1;
+//       duration.nanos -= 1000000000;
+//     } else if (durations.seconds > 0 && duration.nanos < 0) {
+//       duration.seconds -= 1;
+//       duration.nanos += 1000000000;
+//     }
+//
+// Example 2: Compute Timestamp from Timestamp + Duration in pseudo code.
+//
+//     Timestamp start = ...;
+//     Duration duration = ...;
+//     Timestamp end = ...;
+//
+//     end.seconds = start.seconds + duration.seconds;
+//     end.nanos = start.nanos + duration.nanos;
+//
+//     if (end.nanos < 0) {
+//       end.seconds -= 1;
+//       end.nanos += 1000000000;
+//     } else if (end.nanos >= 1000000000) {
+//       end.seconds += 1;
+//       end.nanos -= 1000000000;
+//     }
+//
+// Example 3: Compute Duration from datetime.timedelta in Python.
+//
+//     td = datetime.timedelta(days=3, minutes=10)
+//     duration = Duration()
+//     duration.FromTimedelta(td)
+//
+// # JSON Mapping
+//
+// In JSON format, the Duration type is encoded as a string rather than an
+// object, where the string ends in the suffix "s" (indicating seconds) and
+// is preceded by the number of seconds, with nanoseconds expressed as
+// fractional seconds. For example, 3 seconds with 0 nanoseconds should be
+// encoded in JSON format as "3s", while 3 seconds and 1 nanosecond should
+// be expressed in JSON format as "3.000000001s", and 3 seconds and 1
+// microsecond should be expressed in JSON format as "3.000001s".
+//
+//
+type Duration struct {
+	// Signed seconds of the span of time. Must be from -315,576,000,000
+	// to +315,576,000,000 inclusive. Note: these bounds are computed from:
+	// 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
+	Seconds int64 `protobuf:"varint,1,opt,name=seconds,proto3" json:"seconds,omitempty"`
+	// Signed fractions of a second at nanosecond resolution of the span
+	// of time. Durations less than one second are represented with a 0
+	// `seconds` field and a positive or negative `nanos` field. For durations
+	// of one second or more, a non-zero value for the `nanos` field must be
+	// of the same sign as the `seconds` field. Must be from -999,999,999
+	// to +999,999,999 inclusive.
+	Nanos                int32    `protobuf:"varint,2,opt,name=nanos,proto3" json:"nanos,omitempty"`
+	XXX_NoUnkeyedLiteral struct{} `json:"-"`
+	XXX_unrecognized     []byte   `json:"-"`
+	XXX_sizecache        int32    `json:"-"`
+}
+
+func (m *Duration) Reset()         { *m = Duration{} }
+func (m *Duration) String() string { return proto.CompactTextString(m) }
+func (*Duration) ProtoMessage()    {}
+func (*Duration) Descriptor() ([]byte, []int) {
+	return fileDescriptor_23597b2ebd7ac6c5, []int{0}
+}
+
+func (*Duration) XXX_WellKnownType() string { return "Duration" }
+
+func (m *Duration) XXX_Unmarshal(b []byte) error {
+	return xxx_messageInfo_Duration.Unmarshal(m, b)
+}
+func (m *Duration) XXX_Marshal(b []byte, deterministic bool) ([]byte, error) {
+	return xxx_messageInfo_Duration.Marshal(b, m, deterministic)
+}
+func (m *Duration) XXX_Merge(src proto.Message) {
+	xxx_messageInfo_Duration.Merge(m, src)
+}
+func (m *Duration) XXX_Size() int {
+	return xxx_messageInfo_Duration.Size(m)
+}
+func (m *Duration) XXX_DiscardUnknown() {
+	xxx_messageInfo_Duration.DiscardUnknown(m)
+}
+
+var xxx_messageInfo_Duration proto.InternalMessageInfo
+
+func (m *Duration) GetSeconds() int64 {
+	if m != nil {
+		return m.Seconds
+	}
+	return 0
+}
+
+func (m *Duration) GetNanos() int32 {
+	if m != nil {
+		return m.Nanos
+	}
+	return 0
+}
+
+func init() {
+	proto.RegisterType((*Duration)(nil), "google.protobuf.Duration")
+}
+
+func init() { proto.RegisterFile("google/protobuf/duration.proto", fileDescriptor_23597b2ebd7ac6c5) }
+
+var fileDescriptor_23597b2ebd7ac6c5 = []byte{
+	// 190 bytes of a gzipped FileDescriptorProto
+	0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xff, 0xe2, 0x92, 0x4b, 0xcf, 0xcf, 0x4f,
+	0xcf, 0x49, 0xd5, 0x2f, 0x28, 0xca, 0x2f, 0xc9, 0x4f, 0x2a, 0x4d, 0xd3, 0x4f, 0x29, 0x2d, 0x4a,
+	0x2c, 0xc9, 0xcc, 0xcf, 0xd3, 0x03, 0x8b, 0x08, 0xf1, 0x43, 0xe4, 0xf5, 0x60, 0xf2, 0x4a, 0x56,
+	0x5c, 0x1c, 0x2e, 0x50, 0x25, 0x42, 0x12, 0x5c, 0xec, 0xc5, 0xa9, 0xc9, 0xf9, 0x79, 0x29, 0xc5,
+	0x12, 0x8c, 0x0a, 0x8c, 0x1a, 0xcc, 0x41, 0x30, 0xae, 0x90, 0x08, 0x17, 0x6b, 0x5e, 0x62, 0x5e,
+	0x7e, 0xb1, 0x04, 0x93, 0x02, 0xa3, 0x06, 0x6b, 0x10, 0x84, 0xe3, 0x54, 0xc3, 0x25, 0x9c, 0x9c,
+	0x9f, 0xab, 0x87, 0x66, 0xa4, 0x13, 0x2f, 0xcc, 0xc0, 0x00, 0x90, 0x48, 0x00, 0x63, 0x94, 0x56,
+	0x7a, 0x66, 0x49, 0x46, 0x69, 0x92, 0x5e, 0x72, 0x7e, 0xae, 0x7e, 0x7a, 0x7e, 0x4e, 0x62, 0x5e,
+	0x3a, 0xc2, 0x7d, 0x05, 0x25, 0x95, 0x05, 0xa9, 0xc5, 0x70, 0x67, 0xfe, 0x60, 0x64, 0x5c, 0xc4,
+	0xc4, 0xec, 0x1e, 0xe0, 0xb4, 0x8a, 0x49, 0xce, 0x1d, 0x62, 0x6e, 0x00, 0x54, 0xa9, 0x5e, 0x78,
+	0x6a, 0x4e, 0x8e, 0x77, 0x5e, 0x7e, 0x79, 0x5e, 0x08, 0x48, 0x4b, 0x12, 0x1b, 0xd8, 0x0c, 0x63,
+	0x40, 0x00, 0x00, 0x00, 0xff, 0xff, 0xdc, 0x84, 0x30, 0xff, 0xf3, 0x00, 0x00, 0x00,
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/duration/duration.proto b/vendor/github.com/golang/protobuf/ptypes/duration/duration.proto
new file mode 100644
index 0000000..975fce4
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/duration/duration.proto
@@ -0,0 +1,117 @@
+// Protocol Buffers - Google's data interchange format
+// Copyright 2008 Google Inc.  All rights reserved.
+// https://developers.google.com/protocol-buffers/
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+syntax = "proto3";
+
+package google.protobuf;
+
+option csharp_namespace = "Google.Protobuf.WellKnownTypes";
+option cc_enable_arenas = true;
+option go_package = "github.com/golang/protobuf/ptypes/duration";
+option java_package = "com.google.protobuf";
+option java_outer_classname = "DurationProto";
+option java_multiple_files = true;
+option objc_class_prefix = "GPB";
+
+// A Duration represents a signed, fixed-length span of time represented
+// as a count of seconds and fractions of seconds at nanosecond
+// resolution. It is independent of any calendar and concepts like "day"
+// or "month". It is related to Timestamp in that the difference between
+// two Timestamp values is a Duration and it can be added or subtracted
+// from a Timestamp. Range is approximately +-10,000 years.
+//
+// # Examples
+//
+// Example 1: Compute Duration from two Timestamps in pseudo code.
+//
+//     Timestamp start = ...;
+//     Timestamp end = ...;
+//     Duration duration = ...;
+//
+//     duration.seconds = end.seconds - start.seconds;
+//     duration.nanos = end.nanos - start.nanos;
+//
+//     if (duration.seconds < 0 && duration.nanos > 0) {
+//       duration.seconds += 1;
+//       duration.nanos -= 1000000000;
+//     } else if (durations.seconds > 0 && duration.nanos < 0) {
+//       duration.seconds -= 1;
+//       duration.nanos += 1000000000;
+//     }
+//
+// Example 2: Compute Timestamp from Timestamp + Duration in pseudo code.
+//
+//     Timestamp start = ...;
+//     Duration duration = ...;
+//     Timestamp end = ...;
+//
+//     end.seconds = start.seconds + duration.seconds;
+//     end.nanos = start.nanos + duration.nanos;
+//
+//     if (end.nanos < 0) {
+//       end.seconds -= 1;
+//       end.nanos += 1000000000;
+//     } else if (end.nanos >= 1000000000) {
+//       end.seconds += 1;
+//       end.nanos -= 1000000000;
+//     }
+//
+// Example 3: Compute Duration from datetime.timedelta in Python.
+//
+//     td = datetime.timedelta(days=3, minutes=10)
+//     duration = Duration()
+//     duration.FromTimedelta(td)
+//
+// # JSON Mapping
+//
+// In JSON format, the Duration type is encoded as a string rather than an
+// object, where the string ends in the suffix "s" (indicating seconds) and
+// is preceded by the number of seconds, with nanoseconds expressed as
+// fractional seconds. For example, 3 seconds with 0 nanoseconds should be
+// encoded in JSON format as "3s", while 3 seconds and 1 nanosecond should
+// be expressed in JSON format as "3.000000001s", and 3 seconds and 1
+// microsecond should be expressed in JSON format as "3.000001s".
+//
+//
+message Duration {
+
+  // Signed seconds of the span of time. Must be from -315,576,000,000
+  // to +315,576,000,000 inclusive. Note: these bounds are computed from:
+  // 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
+  int64 seconds = 1;
+
+  // Signed fractions of a second at nanosecond resolution of the span
+  // of time. Durations less than one second are represented with a 0
+  // `seconds` field and a positive or negative `nanos` field. For durations
+  // of one second or more, a non-zero value for the `nanos` field must be
+  // of the same sign as the `seconds` field. Must be from -999,999,999
+  // to +999,999,999 inclusive.
+  int32 nanos = 2;
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/empty/empty.pb.go b/vendor/github.com/golang/protobuf/ptypes/empty/empty.pb.go
new file mode 100644
index 0000000..b4eb03e
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/empty/empty.pb.go
@@ -0,0 +1,83 @@
+// Code generated by protoc-gen-go. DO NOT EDIT.
+// source: google/protobuf/empty.proto
+
+package empty
+
+import (
+	fmt "fmt"
+	proto "github.com/golang/protobuf/proto"
+	math "math"
+)
+
+// Reference imports to suppress errors if they are not otherwise used.
+var _ = proto.Marshal
+var _ = fmt.Errorf
+var _ = math.Inf
+
+// This is a compile-time assertion to ensure that this generated file
+// is compatible with the proto package it is being compiled against.
+// A compilation error at this line likely means your copy of the
+// proto package needs to be updated.
+const _ = proto.ProtoPackageIsVersion3 // please upgrade the proto package
+
+// A generic empty message that you can re-use to avoid defining duplicated
+// empty messages in your APIs. A typical example is to use it as the request
+// or the response type of an API method. For instance:
+//
+//     service Foo {
+//       rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
+//     }
+//
+// The JSON representation for `Empty` is empty JSON object `{}`.
+type Empty struct {
+	XXX_NoUnkeyedLiteral struct{} `json:"-"`
+	XXX_unrecognized     []byte   `json:"-"`
+	XXX_sizecache        int32    `json:"-"`
+}
+
+func (m *Empty) Reset()         { *m = Empty{} }
+func (m *Empty) String() string { return proto.CompactTextString(m) }
+func (*Empty) ProtoMessage()    {}
+func (*Empty) Descriptor() ([]byte, []int) {
+	return fileDescriptor_900544acb223d5b8, []int{0}
+}
+
+func (*Empty) XXX_WellKnownType() string { return "Empty" }
+
+func (m *Empty) XXX_Unmarshal(b []byte) error {
+	return xxx_messageInfo_Empty.Unmarshal(m, b)
+}
+func (m *Empty) XXX_Marshal(b []byte, deterministic bool) ([]byte, error) {
+	return xxx_messageInfo_Empty.Marshal(b, m, deterministic)
+}
+func (m *Empty) XXX_Merge(src proto.Message) {
+	xxx_messageInfo_Empty.Merge(m, src)
+}
+func (m *Empty) XXX_Size() int {
+	return xxx_messageInfo_Empty.Size(m)
+}
+func (m *Empty) XXX_DiscardUnknown() {
+	xxx_messageInfo_Empty.DiscardUnknown(m)
+}
+
+var xxx_messageInfo_Empty proto.InternalMessageInfo
+
+func init() {
+	proto.RegisterType((*Empty)(nil), "google.protobuf.Empty")
+}
+
+func init() { proto.RegisterFile("google/protobuf/empty.proto", fileDescriptor_900544acb223d5b8) }
+
+var fileDescriptor_900544acb223d5b8 = []byte{
+	// 148 bytes of a gzipped FileDescriptorProto
+	0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xff, 0xe2, 0x92, 0x4e, 0xcf, 0xcf, 0x4f,
+	0xcf, 0x49, 0xd5, 0x2f, 0x28, 0xca, 0x2f, 0xc9, 0x4f, 0x2a, 0x4d, 0xd3, 0x4f, 0xcd, 0x2d, 0x28,
+	0xa9, 0xd4, 0x03, 0x73, 0x85, 0xf8, 0x21, 0x92, 0x7a, 0x30, 0x49, 0x25, 0x76, 0x2e, 0x56, 0x57,
+	0x90, 0xbc, 0x53, 0x19, 0x97, 0x70, 0x72, 0x7e, 0xae, 0x1e, 0x9a, 0xbc, 0x13, 0x17, 0x58, 0x36,
+	0x00, 0xc4, 0x0d, 0x60, 0x8c, 0x52, 0x4f, 0xcf, 0x2c, 0xc9, 0x28, 0x4d, 0xd2, 0x4b, 0xce, 0xcf,
+	0xd5, 0x4f, 0xcf, 0xcf, 0x49, 0xcc, 0x4b, 0x47, 0x58, 0x53, 0x50, 0x52, 0x59, 0x90, 0x5a, 0x0c,
+	0xb1, 0xed, 0x07, 0x23, 0xe3, 0x22, 0x26, 0x66, 0xf7, 0x00, 0xa7, 0x55, 0x4c, 0x72, 0xee, 0x10,
+	0x13, 0x03, 0xa0, 0xea, 0xf4, 0xc2, 0x53, 0x73, 0x72, 0xbc, 0xf3, 0xf2, 0xcb, 0xf3, 0x42, 0x40,
+	0xea, 0x93, 0xd8, 0xc0, 0x06, 0x18, 0x03, 0x02, 0x00, 0x00, 0xff, 0xff, 0x64, 0xd4, 0xb3, 0xa6,
+	0xb7, 0x00, 0x00, 0x00,
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/empty/empty.proto b/vendor/github.com/golang/protobuf/ptypes/empty/empty.proto
new file mode 100644
index 0000000..03cacd2
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/empty/empty.proto
@@ -0,0 +1,52 @@
+// Protocol Buffers - Google's data interchange format
+// Copyright 2008 Google Inc.  All rights reserved.
+// https://developers.google.com/protocol-buffers/
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+syntax = "proto3";
+
+package google.protobuf;
+
+option csharp_namespace = "Google.Protobuf.WellKnownTypes";
+option go_package = "github.com/golang/protobuf/ptypes/empty";
+option java_package = "com.google.protobuf";
+option java_outer_classname = "EmptyProto";
+option java_multiple_files = true;
+option objc_class_prefix = "GPB";
+option cc_enable_arenas = true;
+
+// A generic empty message that you can re-use to avoid defining duplicated
+// empty messages in your APIs. A typical example is to use it as the request
+// or the response type of an API method. For instance:
+//
+//     service Foo {
+//       rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
+//     }
+//
+// The JSON representation for `Empty` is empty JSON object `{}`.
+message Empty {}
diff --git a/vendor/github.com/golang/protobuf/ptypes/timestamp.go b/vendor/github.com/golang/protobuf/ptypes/timestamp.go
new file mode 100644
index 0000000..8da0df0
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/timestamp.go
@@ -0,0 +1,132 @@
+// Go support for Protocol Buffers - Google's data interchange format
+//
+// Copyright 2016 The Go Authors.  All rights reserved.
+// https://github.com/golang/protobuf
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+package ptypes
+
+// This file implements operations on google.protobuf.Timestamp.
+
+import (
+	"errors"
+	"fmt"
+	"time"
+
+	tspb "github.com/golang/protobuf/ptypes/timestamp"
+)
+
+const (
+	// Seconds field of the earliest valid Timestamp.
+	// This is time.Date(1, 1, 1, 0, 0, 0, 0, time.UTC).Unix().
+	minValidSeconds = -62135596800
+	// Seconds field just after the latest valid Timestamp.
+	// This is time.Date(10000, 1, 1, 0, 0, 0, 0, time.UTC).Unix().
+	maxValidSeconds = 253402300800
+)
+
+// validateTimestamp determines whether a Timestamp is valid.
+// A valid timestamp represents a time in the range
+// [0001-01-01, 10000-01-01) and has a Nanos field
+// in the range [0, 1e9).
+//
+// If the Timestamp is valid, validateTimestamp returns nil.
+// Otherwise, it returns an error that describes
+// the problem.
+//
+// Every valid Timestamp can be represented by a time.Time, but the converse is not true.
+func validateTimestamp(ts *tspb.Timestamp) error {
+	if ts == nil {
+		return errors.New("timestamp: nil Timestamp")
+	}
+	if ts.Seconds < minValidSeconds {
+		return fmt.Errorf("timestamp: %v before 0001-01-01", ts)
+	}
+	if ts.Seconds >= maxValidSeconds {
+		return fmt.Errorf("timestamp: %v after 10000-01-01", ts)
+	}
+	if ts.Nanos < 0 || ts.Nanos >= 1e9 {
+		return fmt.Errorf("timestamp: %v: nanos not in range [0, 1e9)", ts)
+	}
+	return nil
+}
+
+// Timestamp converts a google.protobuf.Timestamp proto to a time.Time.
+// It returns an error if the argument is invalid.
+//
+// Unlike most Go functions, if Timestamp returns an error, the first return value
+// is not the zero time.Time. Instead, it is the value obtained from the
+// time.Unix function when passed the contents of the Timestamp, in the UTC
+// locale. This may or may not be a meaningful time; many invalid Timestamps
+// do map to valid time.Times.
+//
+// A nil Timestamp returns an error. The first return value in that case is
+// undefined.
+func Timestamp(ts *tspb.Timestamp) (time.Time, error) {
+	// Don't return the zero value on error, because corresponds to a valid
+	// timestamp. Instead return whatever time.Unix gives us.
+	var t time.Time
+	if ts == nil {
+		t = time.Unix(0, 0).UTC() // treat nil like the empty Timestamp
+	} else {
+		t = time.Unix(ts.Seconds, int64(ts.Nanos)).UTC()
+	}
+	return t, validateTimestamp(ts)
+}
+
+// TimestampNow returns a google.protobuf.Timestamp for the current time.
+func TimestampNow() *tspb.Timestamp {
+	ts, err := TimestampProto(time.Now())
+	if err != nil {
+		panic("ptypes: time.Now() out of Timestamp range")
+	}
+	return ts
+}
+
+// TimestampProto converts the time.Time to a google.protobuf.Timestamp proto.
+// It returns an error if the resulting Timestamp is invalid.
+func TimestampProto(t time.Time) (*tspb.Timestamp, error) {
+	ts := &tspb.Timestamp{
+		Seconds: t.Unix(),
+		Nanos:   int32(t.Nanosecond()),
+	}
+	if err := validateTimestamp(ts); err != nil {
+		return nil, err
+	}
+	return ts, nil
+}
+
+// TimestampString returns the RFC 3339 string for valid Timestamps. For invalid
+// Timestamps, it returns an error message in parentheses.
+func TimestampString(ts *tspb.Timestamp) string {
+	t, err := Timestamp(ts)
+	if err != nil {
+		return fmt.Sprintf("(%v)", err)
+	}
+	return t.Format(time.RFC3339Nano)
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/timestamp/timestamp.pb.go b/vendor/github.com/golang/protobuf/ptypes/timestamp/timestamp.pb.go
new file mode 100644
index 0000000..31cd846
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/timestamp/timestamp.pb.go
@@ -0,0 +1,179 @@
+// Code generated by protoc-gen-go. DO NOT EDIT.
+// source: google/protobuf/timestamp.proto
+
+package timestamp
+
+import (
+	fmt "fmt"
+	proto "github.com/golang/protobuf/proto"
+	math "math"
+)
+
+// Reference imports to suppress errors if they are not otherwise used.
+var _ = proto.Marshal
+var _ = fmt.Errorf
+var _ = math.Inf
+
+// This is a compile-time assertion to ensure that this generated file
+// is compatible with the proto package it is being compiled against.
+// A compilation error at this line likely means your copy of the
+// proto package needs to be updated.
+const _ = proto.ProtoPackageIsVersion3 // please upgrade the proto package
+
+// A Timestamp represents a point in time independent of any time zone
+// or calendar, represented as seconds and fractions of seconds at
+// nanosecond resolution in UTC Epoch time. It is encoded using the
+// Proleptic Gregorian Calendar which extends the Gregorian calendar
+// backwards to year one. It is encoded assuming all minutes are 60
+// seconds long, i.e. leap seconds are "smeared" so that no leap second
+// table is needed for interpretation. Range is from
+// 0001-01-01T00:00:00Z to 9999-12-31T23:59:59.999999999Z.
+// By restricting to that range, we ensure that we can convert to
+// and from  RFC 3339 date strings.
+// See [https://www.ietf.org/rfc/rfc3339.txt](https://www.ietf.org/rfc/rfc3339.txt).
+//
+// # Examples
+//
+// Example 1: Compute Timestamp from POSIX `time()`.
+//
+//     Timestamp timestamp;
+//     timestamp.set_seconds(time(NULL));
+//     timestamp.set_nanos(0);
+//
+// Example 2: Compute Timestamp from POSIX `gettimeofday()`.
+//
+//     struct timeval tv;
+//     gettimeofday(&tv, NULL);
+//
+//     Timestamp timestamp;
+//     timestamp.set_seconds(tv.tv_sec);
+//     timestamp.set_nanos(tv.tv_usec * 1000);
+//
+// Example 3: Compute Timestamp from Win32 `GetSystemTimeAsFileTime()`.
+//
+//     FILETIME ft;
+//     GetSystemTimeAsFileTime(&ft);
+//     UINT64 ticks = (((UINT64)ft.dwHighDateTime) << 32) | ft.dwLowDateTime;
+//
+//     // A Windows tick is 100 nanoseconds. Windows epoch 1601-01-01T00:00:00Z
+//     // is 11644473600 seconds before Unix epoch 1970-01-01T00:00:00Z.
+//     Timestamp timestamp;
+//     timestamp.set_seconds((INT64) ((ticks / 10000000) - 11644473600LL));
+//     timestamp.set_nanos((INT32) ((ticks % 10000000) * 100));
+//
+// Example 4: Compute Timestamp from Java `System.currentTimeMillis()`.
+//
+//     long millis = System.currentTimeMillis();
+//
+//     Timestamp timestamp = Timestamp.newBuilder().setSeconds(millis / 1000)
+//         .setNanos((int) ((millis % 1000) * 1000000)).build();
+//
+//
+// Example 5: Compute Timestamp from current time in Python.
+//
+//     timestamp = Timestamp()
+//     timestamp.GetCurrentTime()
+//
+// # JSON Mapping
+//
+// In JSON format, the Timestamp type is encoded as a string in the
+// [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format. That is, the
+// format is "{year}-{month}-{day}T{hour}:{min}:{sec}[.{frac_sec}]Z"
+// where {year} is always expressed using four digits while {month}, {day},
+// {hour}, {min}, and {sec} are zero-padded to two digits each. The fractional
+// seconds, which can go up to 9 digits (i.e. up to 1 nanosecond resolution),
+// are optional. The "Z" suffix indicates the timezone ("UTC"); the timezone
+// is required. A proto3 JSON serializer should always use UTC (as indicated by
+// "Z") when printing the Timestamp type and a proto3 JSON parser should be
+// able to accept both UTC and other timezones (as indicated by an offset).
+//
+// For example, "2017-01-15T01:30:15.01Z" encodes 15.01 seconds past
+// 01:30 UTC on January 15, 2017.
+//
+// In JavaScript, one can convert a Date object to this format using the
+// standard [toISOString()](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/toISOString]
+// method. In Python, a standard `datetime.datetime` object can be converted
+// to this format using [`strftime`](https://docs.python.org/2/library/time.html#time.strftime)
+// with the time format spec '%Y-%m-%dT%H:%M:%S.%fZ'. Likewise, in Java, one
+// can use the Joda Time's [`ISODateTimeFormat.dateTime()`](
+// http://www.joda.org/joda-time/apidocs/org/joda/time/format/ISODateTimeFormat.html#dateTime--
+// ) to obtain a formatter capable of generating timestamps in this format.
+//
+//
+type Timestamp struct {
+	// Represents seconds of UTC time since Unix epoch
+	// 1970-01-01T00:00:00Z. Must be from 0001-01-01T00:00:00Z to
+	// 9999-12-31T23:59:59Z inclusive.
+	Seconds int64 `protobuf:"varint,1,opt,name=seconds,proto3" json:"seconds,omitempty"`
+	// Non-negative fractions of a second at nanosecond resolution. Negative
+	// second values with fractions must still have non-negative nanos values
+	// that count forward in time. Must be from 0 to 999,999,999
+	// inclusive.
+	Nanos                int32    `protobuf:"varint,2,opt,name=nanos,proto3" json:"nanos,omitempty"`
+	XXX_NoUnkeyedLiteral struct{} `json:"-"`
+	XXX_unrecognized     []byte   `json:"-"`
+	XXX_sizecache        int32    `json:"-"`
+}
+
+func (m *Timestamp) Reset()         { *m = Timestamp{} }
+func (m *Timestamp) String() string { return proto.CompactTextString(m) }
+func (*Timestamp) ProtoMessage()    {}
+func (*Timestamp) Descriptor() ([]byte, []int) {
+	return fileDescriptor_292007bbfe81227e, []int{0}
+}
+
+func (*Timestamp) XXX_WellKnownType() string { return "Timestamp" }
+
+func (m *Timestamp) XXX_Unmarshal(b []byte) error {
+	return xxx_messageInfo_Timestamp.Unmarshal(m, b)
+}
+func (m *Timestamp) XXX_Marshal(b []byte, deterministic bool) ([]byte, error) {
+	return xxx_messageInfo_Timestamp.Marshal(b, m, deterministic)
+}
+func (m *Timestamp) XXX_Merge(src proto.Message) {
+	xxx_messageInfo_Timestamp.Merge(m, src)
+}
+func (m *Timestamp) XXX_Size() int {
+	return xxx_messageInfo_Timestamp.Size(m)
+}
+func (m *Timestamp) XXX_DiscardUnknown() {
+	xxx_messageInfo_Timestamp.DiscardUnknown(m)
+}
+
+var xxx_messageInfo_Timestamp proto.InternalMessageInfo
+
+func (m *Timestamp) GetSeconds() int64 {
+	if m != nil {
+		return m.Seconds
+	}
+	return 0
+}
+
+func (m *Timestamp) GetNanos() int32 {
+	if m != nil {
+		return m.Nanos
+	}
+	return 0
+}
+
+func init() {
+	proto.RegisterType((*Timestamp)(nil), "google.protobuf.Timestamp")
+}
+
+func init() { proto.RegisterFile("google/protobuf/timestamp.proto", fileDescriptor_292007bbfe81227e) }
+
+var fileDescriptor_292007bbfe81227e = []byte{
+	// 191 bytes of a gzipped FileDescriptorProto
+	0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xff, 0xe2, 0x92, 0x4f, 0xcf, 0xcf, 0x4f,
+	0xcf, 0x49, 0xd5, 0x2f, 0x28, 0xca, 0x2f, 0xc9, 0x4f, 0x2a, 0x4d, 0xd3, 0x2f, 0xc9, 0xcc, 0x4d,
+	0x2d, 0x2e, 0x49, 0xcc, 0x2d, 0xd0, 0x03, 0x0b, 0x09, 0xf1, 0x43, 0x14, 0xe8, 0xc1, 0x14, 0x28,
+	0x59, 0x73, 0x71, 0x86, 0xc0, 0xd4, 0x08, 0x49, 0x70, 0xb1, 0x17, 0xa7, 0x26, 0xe7, 0xe7, 0xa5,
+	0x14, 0x4b, 0x30, 0x2a, 0x30, 0x6a, 0x30, 0x07, 0xc1, 0xb8, 0x42, 0x22, 0x5c, 0xac, 0x79, 0x89,
+	0x79, 0xf9, 0xc5, 0x12, 0x4c, 0x0a, 0x8c, 0x1a, 0xac, 0x41, 0x10, 0x8e, 0x53, 0x1d, 0x97, 0x70,
+	0x72, 0x7e, 0xae, 0x1e, 0x9a, 0x99, 0x4e, 0x7c, 0x70, 0x13, 0x03, 0x40, 0x42, 0x01, 0x8c, 0x51,
+	0xda, 0xe9, 0x99, 0x25, 0x19, 0xa5, 0x49, 0x7a, 0xc9, 0xf9, 0xb9, 0xfa, 0xe9, 0xf9, 0x39, 0x89,
+	0x79, 0xe9, 0x08, 0x27, 0x16, 0x94, 0x54, 0x16, 0xa4, 0x16, 0x23, 0x5c, 0xfa, 0x83, 0x91, 0x71,
+	0x11, 0x13, 0xb3, 0x7b, 0x80, 0xd3, 0x2a, 0x26, 0x39, 0x77, 0x88, 0xc9, 0x01, 0x50, 0xb5, 0x7a,
+	0xe1, 0xa9, 0x39, 0x39, 0xde, 0x79, 0xf9, 0xe5, 0x79, 0x21, 0x20, 0x3d, 0x49, 0x6c, 0x60, 0x43,
+	0x8c, 0x01, 0x01, 0x00, 0x00, 0xff, 0xff, 0xbc, 0x77, 0x4a, 0x07, 0xf7, 0x00, 0x00, 0x00,
+}
diff --git a/vendor/github.com/golang/protobuf/ptypes/timestamp/timestamp.proto b/vendor/github.com/golang/protobuf/ptypes/timestamp/timestamp.proto
new file mode 100644
index 0000000..eafb3fa
--- /dev/null
+++ b/vendor/github.com/golang/protobuf/ptypes/timestamp/timestamp.proto
@@ -0,0 +1,135 @@
+// Protocol Buffers - Google's data interchange format
+// Copyright 2008 Google Inc.  All rights reserved.
+// https://developers.google.com/protocol-buffers/
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+syntax = "proto3";
+
+package google.protobuf;
+
+option csharp_namespace = "Google.Protobuf.WellKnownTypes";
+option cc_enable_arenas = true;
+option go_package = "github.com/golang/protobuf/ptypes/timestamp";
+option java_package = "com.google.protobuf";
+option java_outer_classname = "TimestampProto";
+option java_multiple_files = true;
+option objc_class_prefix = "GPB";
+
+// A Timestamp represents a point in time independent of any time zone
+// or calendar, represented as seconds and fractions of seconds at
+// nanosecond resolution in UTC Epoch time. It is encoded using the
+// Proleptic Gregorian Calendar which extends the Gregorian calendar
+// backwards to year one. It is encoded assuming all minutes are 60
+// seconds long, i.e. leap seconds are "smeared" so that no leap second
+// table is needed for interpretation. Range is from
+// 0001-01-01T00:00:00Z to 9999-12-31T23:59:59.999999999Z.
+// By restricting to that range, we ensure that we can convert to
+// and from  RFC 3339 date strings.
+// See [https://www.ietf.org/rfc/rfc3339.txt](https://www.ietf.org/rfc/rfc3339.txt).
+//
+// # Examples
+//
+// Example 1: Compute Timestamp from POSIX `time()`.
+//
+//     Timestamp timestamp;
+//     timestamp.set_seconds(time(NULL));
+//     timestamp.set_nanos(0);
+//
+// Example 2: Compute Timestamp from POSIX `gettimeofday()`.
+//
+//     struct timeval tv;
+//     gettimeofday(&tv, NULL);
+//
+//     Timestamp timestamp;
+//     timestamp.set_seconds(tv.tv_sec);
+//     timestamp.set_nanos(tv.tv_usec * 1000);
+//
+// Example 3: Compute Timestamp from Win32 `GetSystemTimeAsFileTime()`.
+//
+//     FILETIME ft;
+//     GetSystemTimeAsFileTime(&ft);
+//     UINT64 ticks = (((UINT64)ft.dwHighDateTime) << 32) | ft.dwLowDateTime;
+//
+//     // A Windows tick is 100 nanoseconds. Windows epoch 1601-01-01T00:00:00Z
+//     // is 11644473600 seconds before Unix epoch 1970-01-01T00:00:00Z.
+//     Timestamp timestamp;
+//     timestamp.set_seconds((INT64) ((ticks / 10000000) - 11644473600LL));
+//     timestamp.set_nanos((INT32) ((ticks % 10000000) * 100));
+//
+// Example 4: Compute Timestamp from Java `System.currentTimeMillis()`.
+//
+//     long millis = System.currentTimeMillis();
+//
+//     Timestamp timestamp = Timestamp.newBuilder().setSeconds(millis / 1000)
+//         .setNanos((int) ((millis % 1000) * 1000000)).build();
+//
+//
+// Example 5: Compute Timestamp from current time in Python.
+//
+//     timestamp = Timestamp()
+//     timestamp.GetCurrentTime()
+//
+// # JSON Mapping
+//
+// In JSON format, the Timestamp type is encoded as a string in the
+// [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format. That is, the
+// format is "{year}-{month}-{day}T{hour}:{min}:{sec}[.{frac_sec}]Z"
+// where {year} is always expressed using four digits while {month}, {day},
+// {hour}, {min}, and {sec} are zero-padded to two digits each. The fractional
+// seconds, which can go up to 9 digits (i.e. up to 1 nanosecond resolution),
+// are optional. The "Z" suffix indicates the timezone ("UTC"); the timezone
+// is required. A proto3 JSON serializer should always use UTC (as indicated by
+// "Z") when printing the Timestamp type and a proto3 JSON parser should be
+// able to accept both UTC and other timezones (as indicated by an offset).
+//
+// For example, "2017-01-15T01:30:15.01Z" encodes 15.01 seconds past
+// 01:30 UTC on January 15, 2017.
+//
+// In JavaScript, one can convert a Date object to this format using the
+// standard [toISOString()](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/toISOString]
+// method. In Python, a standard `datetime.datetime` object can be converted
+// to this format using [`strftime`](https://docs.python.org/2/library/time.html#time.strftime)
+// with the time format spec '%Y-%m-%dT%H:%M:%S.%fZ'. Likewise, in Java, one
+// can use the Joda Time's [`ISODateTimeFormat.dateTime()`](
+// http://www.joda.org/joda-time/apidocs/org/joda/time/format/ISODateTimeFormat.html#dateTime--
+// ) to obtain a formatter capable of generating timestamps in this format.
+//
+//
+message Timestamp {
+
+  // Represents seconds of UTC time since Unix epoch
+  // 1970-01-01T00:00:00Z. Must be from 0001-01-01T00:00:00Z to
+  // 9999-12-31T23:59:59Z inclusive.
+  int64 seconds = 1;
+
+  // Non-negative fractions of a second at nanosecond resolution. Negative
+  // second values with fractions must still have non-negative nanos values
+  // that count forward in time. Must be from 0 to 999,999,999
+  // inclusive.
+  int32 nanos = 2;
+}