initial add - go fmt on grpc
Change-Id: Ib0afadd2fe5571d1456a091f94f5644458f7d3f4
diff --git a/vendor/golang.org/x/net/http2/hpack/huffman.go b/vendor/golang.org/x/net/http2/hpack/huffman.go
new file mode 100644
index 0000000..b412a96
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/huffman.go
@@ -0,0 +1,222 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package hpack
+
+import (
+ "bytes"
+ "errors"
+ "io"
+ "sync"
+)
+
+var bufPool = sync.Pool{
+ New: func() interface{} { return new(bytes.Buffer) },
+}
+
+// HuffmanDecode decodes the string in v and writes the expanded
+// result to w, returning the number of bytes written to w and the
+// Write call's return value. At most one Write call is made.
+func HuffmanDecode(w io.Writer, v []byte) (int, error) {
+ buf := bufPool.Get().(*bytes.Buffer)
+ buf.Reset()
+ defer bufPool.Put(buf)
+ if err := huffmanDecode(buf, 0, v); err != nil {
+ return 0, err
+ }
+ return w.Write(buf.Bytes())
+}
+
+// HuffmanDecodeToString decodes the string in v.
+func HuffmanDecodeToString(v []byte) (string, error) {
+ buf := bufPool.Get().(*bytes.Buffer)
+ buf.Reset()
+ defer bufPool.Put(buf)
+ if err := huffmanDecode(buf, 0, v); err != nil {
+ return "", err
+ }
+ return buf.String(), nil
+}
+
+// ErrInvalidHuffman is returned for errors found decoding
+// Huffman-encoded strings.
+var ErrInvalidHuffman = errors.New("hpack: invalid Huffman-encoded data")
+
+// huffmanDecode decodes v to buf.
+// If maxLen is greater than 0, attempts to write more to buf than
+// maxLen bytes will return ErrStringLength.
+func huffmanDecode(buf *bytes.Buffer, maxLen int, v []byte) error {
+ rootHuffmanNode := getRootHuffmanNode()
+ n := rootHuffmanNode
+ // cur is the bit buffer that has not been fed into n.
+ // cbits is the number of low order bits in cur that are valid.
+ // sbits is the number of bits of the symbol prefix being decoded.
+ cur, cbits, sbits := uint(0), uint8(0), uint8(0)
+ for _, b := range v {
+ cur = cur<<8 | uint(b)
+ cbits += 8
+ sbits += 8
+ for cbits >= 8 {
+ idx := byte(cur >> (cbits - 8))
+ n = n.children[idx]
+ if n == nil {
+ return ErrInvalidHuffman
+ }
+ if n.children == nil {
+ if maxLen != 0 && buf.Len() == maxLen {
+ return ErrStringLength
+ }
+ buf.WriteByte(n.sym)
+ cbits -= n.codeLen
+ n = rootHuffmanNode
+ sbits = cbits
+ } else {
+ cbits -= 8
+ }
+ }
+ }
+ for cbits > 0 {
+ n = n.children[byte(cur<<(8-cbits))]
+ if n == nil {
+ return ErrInvalidHuffman
+ }
+ if n.children != nil || n.codeLen > cbits {
+ break
+ }
+ if maxLen != 0 && buf.Len() == maxLen {
+ return ErrStringLength
+ }
+ buf.WriteByte(n.sym)
+ cbits -= n.codeLen
+ n = rootHuffmanNode
+ sbits = cbits
+ }
+ if sbits > 7 {
+ // Either there was an incomplete symbol, or overlong padding.
+ // Both are decoding errors per RFC 7541 section 5.2.
+ return ErrInvalidHuffman
+ }
+ if mask := uint(1<<cbits - 1); cur&mask != mask {
+ // Trailing bits must be a prefix of EOS per RFC 7541 section 5.2.
+ return ErrInvalidHuffman
+ }
+
+ return nil
+}
+
+type node struct {
+ // children is non-nil for internal nodes
+ children *[256]*node
+
+ // The following are only valid if children is nil:
+ codeLen uint8 // number of bits that led to the output of sym
+ sym byte // output symbol
+}
+
+func newInternalNode() *node {
+ return &node{children: new([256]*node)}
+}
+
+var (
+ buildRootOnce sync.Once
+ lazyRootHuffmanNode *node
+)
+
+func getRootHuffmanNode() *node {
+ buildRootOnce.Do(buildRootHuffmanNode)
+ return lazyRootHuffmanNode
+}
+
+func buildRootHuffmanNode() {
+ if len(huffmanCodes) != 256 {
+ panic("unexpected size")
+ }
+ lazyRootHuffmanNode = newInternalNode()
+ for i, code := range huffmanCodes {
+ addDecoderNode(byte(i), code, huffmanCodeLen[i])
+ }
+}
+
+func addDecoderNode(sym byte, code uint32, codeLen uint8) {
+ cur := lazyRootHuffmanNode
+ for codeLen > 8 {
+ codeLen -= 8
+ i := uint8(code >> codeLen)
+ if cur.children[i] == nil {
+ cur.children[i] = newInternalNode()
+ }
+ cur = cur.children[i]
+ }
+ shift := 8 - codeLen
+ start, end := int(uint8(code<<shift)), int(1<<shift)
+ for i := start; i < start+end; i++ {
+ cur.children[i] = &node{sym: sym, codeLen: codeLen}
+ }
+}
+
+// AppendHuffmanString appends s, as encoded in Huffman codes, to dst
+// and returns the extended buffer.
+func AppendHuffmanString(dst []byte, s string) []byte {
+ rembits := uint8(8)
+
+ for i := 0; i < len(s); i++ {
+ if rembits == 8 {
+ dst = append(dst, 0)
+ }
+ dst, rembits = appendByteToHuffmanCode(dst, rembits, s[i])
+ }
+
+ if rembits < 8 {
+ // special EOS symbol
+ code := uint32(0x3fffffff)
+ nbits := uint8(30)
+
+ t := uint8(code >> (nbits - rembits))
+ dst[len(dst)-1] |= t
+ }
+
+ return dst
+}
+
+// HuffmanEncodeLength returns the number of bytes required to encode
+// s in Huffman codes. The result is round up to byte boundary.
+func HuffmanEncodeLength(s string) uint64 {
+ n := uint64(0)
+ for i := 0; i < len(s); i++ {
+ n += uint64(huffmanCodeLen[s[i]])
+ }
+ return (n + 7) / 8
+}
+
+// appendByteToHuffmanCode appends Huffman code for c to dst and
+// returns the extended buffer and the remaining bits in the last
+// element. The appending is not byte aligned and the remaining bits
+// in the last element of dst is given in rembits.
+func appendByteToHuffmanCode(dst []byte, rembits uint8, c byte) ([]byte, uint8) {
+ code := huffmanCodes[c]
+ nbits := huffmanCodeLen[c]
+
+ for {
+ if rembits > nbits {
+ t := uint8(code << (rembits - nbits))
+ dst[len(dst)-1] |= t
+ rembits -= nbits
+ break
+ }
+
+ t := uint8(code >> (nbits - rembits))
+ dst[len(dst)-1] |= t
+
+ nbits -= rembits
+ rembits = 8
+
+ if nbits == 0 {
+ break
+ }
+
+ dst = append(dst, 0)
+ }
+
+ return dst, rembits
+}