initial add - go fmt on grpc
Change-Id: Ib0afadd2fe5571d1456a091f94f5644458f7d3f4
diff --git a/vendor/golang.org/x/net/http2/http2.go b/vendor/golang.org/x/net/http2/http2.go
new file mode 100644
index 0000000..bdaba1d
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/http2.go
@@ -0,0 +1,384 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package http2 implements the HTTP/2 protocol.
+//
+// This package is low-level and intended to be used directly by very
+// few people. Most users will use it indirectly through the automatic
+// use by the net/http package (from Go 1.6 and later).
+// For use in earlier Go versions see ConfigureServer. (Transport support
+// requires Go 1.6 or later)
+//
+// See https://http2.github.io/ for more information on HTTP/2.
+//
+// See https://http2.golang.org/ for a test server running this code.
+//
+package http2 // import "golang.org/x/net/http2"
+
+import (
+ "bufio"
+ "crypto/tls"
+ "errors"
+ "fmt"
+ "io"
+ "net/http"
+ "os"
+ "sort"
+ "strconv"
+ "strings"
+ "sync"
+
+ "golang.org/x/net/http/httpguts"
+)
+
+var (
+ VerboseLogs bool
+ logFrameWrites bool
+ logFrameReads bool
+ inTests bool
+)
+
+func init() {
+ e := os.Getenv("GODEBUG")
+ if strings.Contains(e, "http2debug=1") {
+ VerboseLogs = true
+ }
+ if strings.Contains(e, "http2debug=2") {
+ VerboseLogs = true
+ logFrameWrites = true
+ logFrameReads = true
+ }
+}
+
+const (
+ // ClientPreface is the string that must be sent by new
+ // connections from clients.
+ ClientPreface = "PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n"
+
+ // SETTINGS_MAX_FRAME_SIZE default
+ // http://http2.github.io/http2-spec/#rfc.section.6.5.2
+ initialMaxFrameSize = 16384
+
+ // NextProtoTLS is the NPN/ALPN protocol negotiated during
+ // HTTP/2's TLS setup.
+ NextProtoTLS = "h2"
+
+ // http://http2.github.io/http2-spec/#SettingValues
+ initialHeaderTableSize = 4096
+
+ initialWindowSize = 65535 // 6.9.2 Initial Flow Control Window Size
+
+ defaultMaxReadFrameSize = 1 << 20
+)
+
+var (
+ clientPreface = []byte(ClientPreface)
+)
+
+type streamState int
+
+// HTTP/2 stream states.
+//
+// See http://tools.ietf.org/html/rfc7540#section-5.1.
+//
+// For simplicity, the server code merges "reserved (local)" into
+// "half-closed (remote)". This is one less state transition to track.
+// The only downside is that we send PUSH_PROMISEs slightly less
+// liberally than allowable. More discussion here:
+// https://lists.w3.org/Archives/Public/ietf-http-wg/2016JulSep/0599.html
+//
+// "reserved (remote)" is omitted since the client code does not
+// support server push.
+const (
+ stateIdle streamState = iota
+ stateOpen
+ stateHalfClosedLocal
+ stateHalfClosedRemote
+ stateClosed
+)
+
+var stateName = [...]string{
+ stateIdle: "Idle",
+ stateOpen: "Open",
+ stateHalfClosedLocal: "HalfClosedLocal",
+ stateHalfClosedRemote: "HalfClosedRemote",
+ stateClosed: "Closed",
+}
+
+func (st streamState) String() string {
+ return stateName[st]
+}
+
+// Setting is a setting parameter: which setting it is, and its value.
+type Setting struct {
+ // ID is which setting is being set.
+ // See http://http2.github.io/http2-spec/#SettingValues
+ ID SettingID
+
+ // Val is the value.
+ Val uint32
+}
+
+func (s Setting) String() string {
+ return fmt.Sprintf("[%v = %d]", s.ID, s.Val)
+}
+
+// Valid reports whether the setting is valid.
+func (s Setting) Valid() error {
+ // Limits and error codes from 6.5.2 Defined SETTINGS Parameters
+ switch s.ID {
+ case SettingEnablePush:
+ if s.Val != 1 && s.Val != 0 {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ case SettingInitialWindowSize:
+ if s.Val > 1<<31-1 {
+ return ConnectionError(ErrCodeFlowControl)
+ }
+ case SettingMaxFrameSize:
+ if s.Val < 16384 || s.Val > 1<<24-1 {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ }
+ return nil
+}
+
+// A SettingID is an HTTP/2 setting as defined in
+// http://http2.github.io/http2-spec/#iana-settings
+type SettingID uint16
+
+const (
+ SettingHeaderTableSize SettingID = 0x1
+ SettingEnablePush SettingID = 0x2
+ SettingMaxConcurrentStreams SettingID = 0x3
+ SettingInitialWindowSize SettingID = 0x4
+ SettingMaxFrameSize SettingID = 0x5
+ SettingMaxHeaderListSize SettingID = 0x6
+)
+
+var settingName = map[SettingID]string{
+ SettingHeaderTableSize: "HEADER_TABLE_SIZE",
+ SettingEnablePush: "ENABLE_PUSH",
+ SettingMaxConcurrentStreams: "MAX_CONCURRENT_STREAMS",
+ SettingInitialWindowSize: "INITIAL_WINDOW_SIZE",
+ SettingMaxFrameSize: "MAX_FRAME_SIZE",
+ SettingMaxHeaderListSize: "MAX_HEADER_LIST_SIZE",
+}
+
+func (s SettingID) String() string {
+ if v, ok := settingName[s]; ok {
+ return v
+ }
+ return fmt.Sprintf("UNKNOWN_SETTING_%d", uint16(s))
+}
+
+var (
+ errInvalidHeaderFieldName = errors.New("http2: invalid header field name")
+ errInvalidHeaderFieldValue = errors.New("http2: invalid header field value")
+)
+
+// validWireHeaderFieldName reports whether v is a valid header field
+// name (key). See httpguts.ValidHeaderName for the base rules.
+//
+// Further, http2 says:
+// "Just as in HTTP/1.x, header field names are strings of ASCII
+// characters that are compared in a case-insensitive
+// fashion. However, header field names MUST be converted to
+// lowercase prior to their encoding in HTTP/2. "
+func validWireHeaderFieldName(v string) bool {
+ if len(v) == 0 {
+ return false
+ }
+ for _, r := range v {
+ if !httpguts.IsTokenRune(r) {
+ return false
+ }
+ if 'A' <= r && r <= 'Z' {
+ return false
+ }
+ }
+ return true
+}
+
+func httpCodeString(code int) string {
+ switch code {
+ case 200:
+ return "200"
+ case 404:
+ return "404"
+ }
+ return strconv.Itoa(code)
+}
+
+// from pkg io
+type stringWriter interface {
+ WriteString(s string) (n int, err error)
+}
+
+// A gate lets two goroutines coordinate their activities.
+type gate chan struct{}
+
+func (g gate) Done() { g <- struct{}{} }
+func (g gate) Wait() { <-g }
+
+// A closeWaiter is like a sync.WaitGroup but only goes 1 to 0 (open to closed).
+type closeWaiter chan struct{}
+
+// Init makes a closeWaiter usable.
+// It exists because so a closeWaiter value can be placed inside a
+// larger struct and have the Mutex and Cond's memory in the same
+// allocation.
+func (cw *closeWaiter) Init() {
+ *cw = make(chan struct{})
+}
+
+// Close marks the closeWaiter as closed and unblocks any waiters.
+func (cw closeWaiter) Close() {
+ close(cw)
+}
+
+// Wait waits for the closeWaiter to become closed.
+func (cw closeWaiter) Wait() {
+ <-cw
+}
+
+// bufferedWriter is a buffered writer that writes to w.
+// Its buffered writer is lazily allocated as needed, to minimize
+// idle memory usage with many connections.
+type bufferedWriter struct {
+ w io.Writer // immutable
+ bw *bufio.Writer // non-nil when data is buffered
+}
+
+func newBufferedWriter(w io.Writer) *bufferedWriter {
+ return &bufferedWriter{w: w}
+}
+
+// bufWriterPoolBufferSize is the size of bufio.Writer's
+// buffers created using bufWriterPool.
+//
+// TODO: pick a less arbitrary value? this is a bit under
+// (3 x typical 1500 byte MTU) at least. Other than that,
+// not much thought went into it.
+const bufWriterPoolBufferSize = 4 << 10
+
+var bufWriterPool = sync.Pool{
+ New: func() interface{} {
+ return bufio.NewWriterSize(nil, bufWriterPoolBufferSize)
+ },
+}
+
+func (w *bufferedWriter) Available() int {
+ if w.bw == nil {
+ return bufWriterPoolBufferSize
+ }
+ return w.bw.Available()
+}
+
+func (w *bufferedWriter) Write(p []byte) (n int, err error) {
+ if w.bw == nil {
+ bw := bufWriterPool.Get().(*bufio.Writer)
+ bw.Reset(w.w)
+ w.bw = bw
+ }
+ return w.bw.Write(p)
+}
+
+func (w *bufferedWriter) Flush() error {
+ bw := w.bw
+ if bw == nil {
+ return nil
+ }
+ err := bw.Flush()
+ bw.Reset(nil)
+ bufWriterPool.Put(bw)
+ w.bw = nil
+ return err
+}
+
+func mustUint31(v int32) uint32 {
+ if v < 0 || v > 2147483647 {
+ panic("out of range")
+ }
+ return uint32(v)
+}
+
+// bodyAllowedForStatus reports whether a given response status code
+// permits a body. See RFC 7230, section 3.3.
+func bodyAllowedForStatus(status int) bool {
+ switch {
+ case status >= 100 && status <= 199:
+ return false
+ case status == 204:
+ return false
+ case status == 304:
+ return false
+ }
+ return true
+}
+
+type httpError struct {
+ msg string
+ timeout bool
+}
+
+func (e *httpError) Error() string { return e.msg }
+func (e *httpError) Timeout() bool { return e.timeout }
+func (e *httpError) Temporary() bool { return true }
+
+var errTimeout error = &httpError{msg: "http2: timeout awaiting response headers", timeout: true}
+
+type connectionStater interface {
+ ConnectionState() tls.ConnectionState
+}
+
+var sorterPool = sync.Pool{New: func() interface{} { return new(sorter) }}
+
+type sorter struct {
+ v []string // owned by sorter
+}
+
+func (s *sorter) Len() int { return len(s.v) }
+func (s *sorter) Swap(i, j int) { s.v[i], s.v[j] = s.v[j], s.v[i] }
+func (s *sorter) Less(i, j int) bool { return s.v[i] < s.v[j] }
+
+// Keys returns the sorted keys of h.
+//
+// The returned slice is only valid until s used again or returned to
+// its pool.
+func (s *sorter) Keys(h http.Header) []string {
+ keys := s.v[:0]
+ for k := range h {
+ keys = append(keys, k)
+ }
+ s.v = keys
+ sort.Sort(s)
+ return keys
+}
+
+func (s *sorter) SortStrings(ss []string) {
+ // Our sorter works on s.v, which sorter owns, so
+ // stash it away while we sort the user's buffer.
+ save := s.v
+ s.v = ss
+ sort.Sort(s)
+ s.v = save
+}
+
+// validPseudoPath reports whether v is a valid :path pseudo-header
+// value. It must be either:
+//
+// *) a non-empty string starting with '/'
+// *) the string '*', for OPTIONS requests.
+//
+// For now this is only used a quick check for deciding when to clean
+// up Opaque URLs before sending requests from the Transport.
+// See golang.org/issue/16847
+//
+// We used to enforce that the path also didn't start with "//", but
+// Google's GFE accepts such paths and Chrome sends them, so ignore
+// that part of the spec. See golang.org/issue/19103.
+func validPseudoPath(v string) bool {
+ return (len(v) > 0 && v[0] == '/') || v == "*"
+}