diff --git a/vendor/golang.org/x/net/http2/writesched.go b/vendor/golang.org/x/net/http2/writesched.go
new file mode 100644
index 0000000..f24d2b1
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/writesched.go
@@ -0,0 +1,248 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import "fmt"
+
+// WriteScheduler is the interface implemented by HTTP/2 write schedulers.
+// Methods are never called concurrently.
+type WriteScheduler interface {
+	// OpenStream opens a new stream in the write scheduler.
+	// It is illegal to call this with streamID=0 or with a streamID that is
+	// already open -- the call may panic.
+	OpenStream(streamID uint32, options OpenStreamOptions)
+
+	// CloseStream closes a stream in the write scheduler. Any frames queued on
+	// this stream should be discarded. It is illegal to call this on a stream
+	// that is not open -- the call may panic.
+	CloseStream(streamID uint32)
+
+	// AdjustStream adjusts the priority of the given stream. This may be called
+	// on a stream that has not yet been opened or has been closed. Note that
+	// RFC 7540 allows PRIORITY frames to be sent on streams in any state. See:
+	// https://tools.ietf.org/html/rfc7540#section-5.1
+	AdjustStream(streamID uint32, priority PriorityParam)
+
+	// Push queues a frame in the scheduler. In most cases, this will not be
+	// called with wr.StreamID()!=0 unless that stream is currently open. The one
+	// exception is RST_STREAM frames, which may be sent on idle or closed streams.
+	Push(wr FrameWriteRequest)
+
+	// Pop dequeues the next frame to write. Returns false if no frames can
+	// be written. Frames with a given wr.StreamID() are Pop'd in the same
+	// order they are Push'd. No frames should be discarded except by CloseStream.
+	Pop() (wr FrameWriteRequest, ok bool)
+}
+
+// OpenStreamOptions specifies extra options for WriteScheduler.OpenStream.
+type OpenStreamOptions struct {
+	// PusherID is zero if the stream was initiated by the client. Otherwise,
+	// PusherID names the stream that pushed the newly opened stream.
+	PusherID uint32
+}
+
+// FrameWriteRequest is a request to write a frame.
+type FrameWriteRequest struct {
+	// write is the interface value that does the writing, once the
+	// WriteScheduler has selected this frame to write. The write
+	// functions are all defined in write.go.
+	write writeFramer
+
+	// stream is the stream on which this frame will be written.
+	// nil for non-stream frames like PING and SETTINGS.
+	stream *stream
+
+	// done, if non-nil, must be a buffered channel with space for
+	// 1 message and is sent the return value from write (or an
+	// earlier error) when the frame has been written.
+	done chan error
+}
+
+// StreamID returns the id of the stream this frame will be written to.
+// 0 is used for non-stream frames such as PING and SETTINGS.
+func (wr FrameWriteRequest) StreamID() uint32 {
+	if wr.stream == nil {
+		if se, ok := wr.write.(StreamError); ok {
+			// (*serverConn).resetStream doesn't set
+			// stream because it doesn't necessarily have
+			// one. So special case this type of write
+			// message.
+			return se.StreamID
+		}
+		return 0
+	}
+	return wr.stream.id
+}
+
+// isControl reports whether wr is a control frame for MaxQueuedControlFrames
+// purposes. That includes non-stream frames and RST_STREAM frames.
+func (wr FrameWriteRequest) isControl() bool {
+	return wr.stream == nil
+}
+
+// DataSize returns the number of flow control bytes that must be consumed
+// to write this entire frame. This is 0 for non-DATA frames.
+func (wr FrameWriteRequest) DataSize() int {
+	if wd, ok := wr.write.(*writeData); ok {
+		return len(wd.p)
+	}
+	return 0
+}
+
+// Consume consumes min(n, available) bytes from this frame, where available
+// is the number of flow control bytes available on the stream. Consume returns
+// 0, 1, or 2 frames, where the integer return value gives the number of frames
+// returned.
+//
+// If flow control prevents consuming any bytes, this returns (_, _, 0). If
+// the entire frame was consumed, this returns (wr, _, 1). Otherwise, this
+// returns (consumed, rest, 2), where 'consumed' contains the consumed bytes and
+// 'rest' contains the remaining bytes. The consumed bytes are deducted from the
+// underlying stream's flow control budget.
+func (wr FrameWriteRequest) Consume(n int32) (FrameWriteRequest, FrameWriteRequest, int) {
+	var empty FrameWriteRequest
+
+	// Non-DATA frames are always consumed whole.
+	wd, ok := wr.write.(*writeData)
+	if !ok || len(wd.p) == 0 {
+		return wr, empty, 1
+	}
+
+	// Might need to split after applying limits.
+	allowed := wr.stream.flow.available()
+	if n < allowed {
+		allowed = n
+	}
+	if wr.stream.sc.maxFrameSize < allowed {
+		allowed = wr.stream.sc.maxFrameSize
+	}
+	if allowed <= 0 {
+		return empty, empty, 0
+	}
+	if len(wd.p) > int(allowed) {
+		wr.stream.flow.take(allowed)
+		consumed := FrameWriteRequest{
+			stream: wr.stream,
+			write: &writeData{
+				streamID: wd.streamID,
+				p:        wd.p[:allowed],
+				// Even if the original had endStream set, there
+				// are bytes remaining because len(wd.p) > allowed,
+				// so we know endStream is false.
+				endStream: false,
+			},
+			// Our caller is blocking on the final DATA frame, not
+			// this intermediate frame, so no need to wait.
+			done: nil,
+		}
+		rest := FrameWriteRequest{
+			stream: wr.stream,
+			write: &writeData{
+				streamID:  wd.streamID,
+				p:         wd.p[allowed:],
+				endStream: wd.endStream,
+			},
+			done: wr.done,
+		}
+		return consumed, rest, 2
+	}
+
+	// The frame is consumed whole.
+	// NB: This cast cannot overflow because allowed is <= math.MaxInt32.
+	wr.stream.flow.take(int32(len(wd.p)))
+	return wr, empty, 1
+}
+
+// String is for debugging only.
+func (wr FrameWriteRequest) String() string {
+	var des string
+	if s, ok := wr.write.(fmt.Stringer); ok {
+		des = s.String()
+	} else {
+		des = fmt.Sprintf("%T", wr.write)
+	}
+	return fmt.Sprintf("[FrameWriteRequest stream=%d, ch=%v, writer=%v]", wr.StreamID(), wr.done != nil, des)
+}
+
+// replyToWriter sends err to wr.done and panics if the send must block
+// This does nothing if wr.done is nil.
+func (wr *FrameWriteRequest) replyToWriter(err error) {
+	if wr.done == nil {
+		return
+	}
+	select {
+	case wr.done <- err:
+	default:
+		panic(fmt.Sprintf("unbuffered done channel passed in for type %T", wr.write))
+	}
+	wr.write = nil // prevent use (assume it's tainted after wr.done send)
+}
+
+// writeQueue is used by implementations of WriteScheduler.
+type writeQueue struct {
+	s []FrameWriteRequest
+}
+
+func (q *writeQueue) empty() bool { return len(q.s) == 0 }
+
+func (q *writeQueue) push(wr FrameWriteRequest) {
+	q.s = append(q.s, wr)
+}
+
+func (q *writeQueue) shift() FrameWriteRequest {
+	if len(q.s) == 0 {
+		panic("invalid use of queue")
+	}
+	wr := q.s[0]
+	// TODO: less copy-happy queue.
+	copy(q.s, q.s[1:])
+	q.s[len(q.s)-1] = FrameWriteRequest{}
+	q.s = q.s[:len(q.s)-1]
+	return wr
+}
+
+// consume consumes up to n bytes from q.s[0]. If the frame is
+// entirely consumed, it is removed from the queue. If the frame
+// is partially consumed, the frame is kept with the consumed
+// bytes removed. Returns true iff any bytes were consumed.
+func (q *writeQueue) consume(n int32) (FrameWriteRequest, bool) {
+	if len(q.s) == 0 {
+		return FrameWriteRequest{}, false
+	}
+	consumed, rest, numresult := q.s[0].Consume(n)
+	switch numresult {
+	case 0:
+		return FrameWriteRequest{}, false
+	case 1:
+		q.shift()
+	case 2:
+		q.s[0] = rest
+	}
+	return consumed, true
+}
+
+type writeQueuePool []*writeQueue
+
+// put inserts an unused writeQueue into the pool.
+func (p *writeQueuePool) put(q *writeQueue) {
+	for i := range q.s {
+		q.s[i] = FrameWriteRequest{}
+	}
+	q.s = q.s[:0]
+	*p = append(*p, q)
+}
+
+// get returns an empty writeQueue.
+func (p *writeQueuePool) get() *writeQueue {
+	ln := len(*p)
+	if ln == 0 {
+		return new(writeQueue)
+	}
+	x := ln - 1
+	q := (*p)[x]
+	(*p)[x] = nil
+	*p = (*p)[:x]
+	return q
+}