diff --git a/vendor/google.golang.org/grpc/resolver/dns/dns_resolver.go b/vendor/google.golang.org/grpc/resolver/dns/dns_resolver.go
new file mode 100644
index 0000000..297492e
--- /dev/null
+++ b/vendor/google.golang.org/grpc/resolver/dns/dns_resolver.go
@@ -0,0 +1,457 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package dns implements a dns resolver to be installed as the default resolver
+// in grpc.
+package dns
+
+import (
+	"context"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"net"
+	"os"
+	"strconv"
+	"strings"
+	"sync"
+	"time"
+
+	"google.golang.org/grpc/grpclog"
+	"google.golang.org/grpc/internal/backoff"
+	"google.golang.org/grpc/internal/grpcrand"
+	"google.golang.org/grpc/resolver"
+)
+
+func init() {
+	resolver.Register(NewBuilder())
+}
+
+const (
+	defaultPort       = "443"
+	defaultFreq       = time.Minute * 30
+	defaultDNSSvrPort = "53"
+	golang            = "GO"
+	// txtPrefix is the prefix string to be prepended to the host name for txt record lookup.
+	txtPrefix = "_grpc_config."
+	// In DNS, service config is encoded in a TXT record via the mechanism
+	// described in RFC-1464 using the attribute name grpc_config.
+	txtAttribute = "grpc_config="
+)
+
+var (
+	errMissingAddr = errors.New("dns resolver: missing address")
+
+	// Addresses ending with a colon that is supposed to be the separator
+	// between host and port is not allowed.  E.g. "::" is a valid address as
+	// it is an IPv6 address (host only) and "[::]:" is invalid as it ends with
+	// a colon as the host and port separator
+	errEndsWithColon = errors.New("dns resolver: missing port after port-separator colon")
+)
+
+var (
+	defaultResolver netResolver = net.DefaultResolver
+	// To prevent excessive re-resolution, we enforce a rate limit on DNS
+	// resolution requests.
+	minDNSResRate = 30 * time.Second
+)
+
+var customAuthorityDialler = func(authority string) func(ctx context.Context, network, address string) (net.Conn, error) {
+	return func(ctx context.Context, network, address string) (net.Conn, error) {
+		var dialer net.Dialer
+		return dialer.DialContext(ctx, network, authority)
+	}
+}
+
+var customAuthorityResolver = func(authority string) (netResolver, error) {
+	host, port, err := parseTarget(authority, defaultDNSSvrPort)
+	if err != nil {
+		return nil, err
+	}
+
+	authorityWithPort := net.JoinHostPort(host, port)
+
+	return &net.Resolver{
+		PreferGo: true,
+		Dial:     customAuthorityDialler(authorityWithPort),
+	}, nil
+}
+
+// NewBuilder creates a dnsBuilder which is used to factory DNS resolvers.
+func NewBuilder() resolver.Builder {
+	return &dnsBuilder{minFreq: defaultFreq}
+}
+
+type dnsBuilder struct {
+	// minimum frequency of polling the DNS server.
+	minFreq time.Duration
+}
+
+// Build creates and starts a DNS resolver that watches the name resolution of the target.
+func (b *dnsBuilder) Build(target resolver.Target, cc resolver.ClientConn, opts resolver.BuildOption) (resolver.Resolver, error) {
+	host, port, err := parseTarget(target.Endpoint, defaultPort)
+	if err != nil {
+		return nil, err
+	}
+
+	// IP address.
+	if net.ParseIP(host) != nil {
+		host, _ = formatIP(host)
+		addr := []resolver.Address{{Addr: host + ":" + port}}
+		i := &ipResolver{
+			cc: cc,
+			ip: addr,
+			rn: make(chan struct{}, 1),
+			q:  make(chan struct{}),
+		}
+		cc.NewAddress(addr)
+		go i.watcher()
+		return i, nil
+	}
+
+	// DNS address (non-IP).
+	ctx, cancel := context.WithCancel(context.Background())
+	d := &dnsResolver{
+		freq:                 b.minFreq,
+		backoff:              backoff.Exponential{MaxDelay: b.minFreq},
+		host:                 host,
+		port:                 port,
+		ctx:                  ctx,
+		cancel:               cancel,
+		cc:                   cc,
+		t:                    time.NewTimer(0),
+		rn:                   make(chan struct{}, 1),
+		disableServiceConfig: opts.DisableServiceConfig,
+	}
+
+	if target.Authority == "" {
+		d.resolver = defaultResolver
+	} else {
+		d.resolver, err = customAuthorityResolver(target.Authority)
+		if err != nil {
+			return nil, err
+		}
+	}
+
+	d.wg.Add(1)
+	go d.watcher()
+	return d, nil
+}
+
+// Scheme returns the naming scheme of this resolver builder, which is "dns".
+func (b *dnsBuilder) Scheme() string {
+	return "dns"
+}
+
+type netResolver interface {
+	LookupHost(ctx context.Context, host string) (addrs []string, err error)
+	LookupSRV(ctx context.Context, service, proto, name string) (cname string, addrs []*net.SRV, err error)
+	LookupTXT(ctx context.Context, name string) (txts []string, err error)
+}
+
+// ipResolver watches for the name resolution update for an IP address.
+type ipResolver struct {
+	cc resolver.ClientConn
+	ip []resolver.Address
+	// rn channel is used by ResolveNow() to force an immediate resolution of the target.
+	rn chan struct{}
+	q  chan struct{}
+}
+
+// ResolveNow resend the address it stores, no resolution is needed.
+func (i *ipResolver) ResolveNow(opt resolver.ResolveNowOption) {
+	select {
+	case i.rn <- struct{}{}:
+	default:
+	}
+}
+
+// Close closes the ipResolver.
+func (i *ipResolver) Close() {
+	close(i.q)
+}
+
+func (i *ipResolver) watcher() {
+	for {
+		select {
+		case <-i.rn:
+			i.cc.NewAddress(i.ip)
+		case <-i.q:
+			return
+		}
+	}
+}
+
+// dnsResolver watches for the name resolution update for a non-IP target.
+type dnsResolver struct {
+	freq       time.Duration
+	backoff    backoff.Exponential
+	retryCount int
+	host       string
+	port       string
+	resolver   netResolver
+	ctx        context.Context
+	cancel     context.CancelFunc
+	cc         resolver.ClientConn
+	// rn channel is used by ResolveNow() to force an immediate resolution of the target.
+	rn chan struct{}
+	t  *time.Timer
+	// wg is used to enforce Close() to return after the watcher() goroutine has finished.
+	// Otherwise, data race will be possible. [Race Example] in dns_resolver_test we
+	// replace the real lookup functions with mocked ones to facilitate testing.
+	// If Close() doesn't wait for watcher() goroutine finishes, race detector sometimes
+	// will warns lookup (READ the lookup function pointers) inside watcher() goroutine
+	// has data race with replaceNetFunc (WRITE the lookup function pointers).
+	wg                   sync.WaitGroup
+	disableServiceConfig bool
+}
+
+// ResolveNow invoke an immediate resolution of the target that this dnsResolver watches.
+func (d *dnsResolver) ResolveNow(opt resolver.ResolveNowOption) {
+	select {
+	case d.rn <- struct{}{}:
+	default:
+	}
+}
+
+// Close closes the dnsResolver.
+func (d *dnsResolver) Close() {
+	d.cancel()
+	d.wg.Wait()
+	d.t.Stop()
+}
+
+func (d *dnsResolver) watcher() {
+	defer d.wg.Done()
+	for {
+		select {
+		case <-d.ctx.Done():
+			return
+		case <-d.t.C:
+		case <-d.rn:
+			if !d.t.Stop() {
+				// Before resetting a timer, it should be stopped to prevent racing with
+				// reads on it's channel.
+				<-d.t.C
+			}
+		}
+
+		result, sc := d.lookup()
+		// Next lookup should happen within an interval defined by d.freq. It may be
+		// more often due to exponential retry on empty address list.
+		if len(result) == 0 {
+			d.retryCount++
+			d.t.Reset(d.backoff.Backoff(d.retryCount))
+		} else {
+			d.retryCount = 0
+			d.t.Reset(d.freq)
+		}
+		d.cc.NewServiceConfig(sc)
+		d.cc.NewAddress(result)
+
+		// Sleep to prevent excessive re-resolutions. Incoming resolution requests
+		// will be queued in d.rn.
+		t := time.NewTimer(minDNSResRate)
+		select {
+		case <-t.C:
+		case <-d.ctx.Done():
+			t.Stop()
+			return
+		}
+	}
+}
+
+func (d *dnsResolver) lookupSRV() []resolver.Address {
+	var newAddrs []resolver.Address
+	_, srvs, err := d.resolver.LookupSRV(d.ctx, "grpclb", "tcp", d.host)
+	if err != nil {
+		grpclog.Infof("grpc: failed dns SRV record lookup due to %v.\n", err)
+		return nil
+	}
+	for _, s := range srvs {
+		lbAddrs, err := d.resolver.LookupHost(d.ctx, s.Target)
+		if err != nil {
+			grpclog.Infof("grpc: failed load balancer address dns lookup due to %v.\n", err)
+			continue
+		}
+		for _, a := range lbAddrs {
+			a, ok := formatIP(a)
+			if !ok {
+				grpclog.Errorf("grpc: failed IP parsing due to %v.\n", err)
+				continue
+			}
+			addr := a + ":" + strconv.Itoa(int(s.Port))
+			newAddrs = append(newAddrs, resolver.Address{Addr: addr, Type: resolver.GRPCLB, ServerName: s.Target})
+		}
+	}
+	return newAddrs
+}
+
+func (d *dnsResolver) lookupTXT() string {
+	ss, err := d.resolver.LookupTXT(d.ctx, txtPrefix+d.host)
+	if err != nil {
+		grpclog.Infof("grpc: failed dns TXT record lookup due to %v.\n", err)
+		return ""
+	}
+	var res string
+	for _, s := range ss {
+		res += s
+	}
+
+	// TXT record must have "grpc_config=" attribute in order to be used as service config.
+	if !strings.HasPrefix(res, txtAttribute) {
+		grpclog.Warningf("grpc: TXT record %v missing %v attribute", res, txtAttribute)
+		return ""
+	}
+	return strings.TrimPrefix(res, txtAttribute)
+}
+
+func (d *dnsResolver) lookupHost() []resolver.Address {
+	var newAddrs []resolver.Address
+	addrs, err := d.resolver.LookupHost(d.ctx, d.host)
+	if err != nil {
+		grpclog.Warningf("grpc: failed dns A record lookup due to %v.\n", err)
+		return nil
+	}
+	for _, a := range addrs {
+		a, ok := formatIP(a)
+		if !ok {
+			grpclog.Errorf("grpc: failed IP parsing due to %v.\n", err)
+			continue
+		}
+		addr := a + ":" + d.port
+		newAddrs = append(newAddrs, resolver.Address{Addr: addr})
+	}
+	return newAddrs
+}
+
+func (d *dnsResolver) lookup() ([]resolver.Address, string) {
+	newAddrs := d.lookupSRV()
+	// Support fallback to non-balancer address.
+	newAddrs = append(newAddrs, d.lookupHost()...)
+	if d.disableServiceConfig {
+		return newAddrs, ""
+	}
+	sc := d.lookupTXT()
+	return newAddrs, canaryingSC(sc)
+}
+
+// formatIP returns ok = false if addr is not a valid textual representation of an IP address.
+// If addr is an IPv4 address, return the addr and ok = true.
+// If addr is an IPv6 address, return the addr enclosed in square brackets and ok = true.
+func formatIP(addr string) (addrIP string, ok bool) {
+	ip := net.ParseIP(addr)
+	if ip == nil {
+		return "", false
+	}
+	if ip.To4() != nil {
+		return addr, true
+	}
+	return "[" + addr + "]", true
+}
+
+// parseTarget takes the user input target string and default port, returns formatted host and port info.
+// If target doesn't specify a port, set the port to be the defaultPort.
+// If target is in IPv6 format and host-name is enclosed in square brackets, brackets
+// are stripped when setting the host.
+// examples:
+// target: "www.google.com" defaultPort: "443" returns host: "www.google.com", port: "443"
+// target: "ipv4-host:80" defaultPort: "443" returns host: "ipv4-host", port: "80"
+// target: "[ipv6-host]" defaultPort: "443" returns host: "ipv6-host", port: "443"
+// target: ":80" defaultPort: "443" returns host: "localhost", port: "80"
+func parseTarget(target, defaultPort string) (host, port string, err error) {
+	if target == "" {
+		return "", "", errMissingAddr
+	}
+	if ip := net.ParseIP(target); ip != nil {
+		// target is an IPv4 or IPv6(without brackets) address
+		return target, defaultPort, nil
+	}
+	if host, port, err = net.SplitHostPort(target); err == nil {
+		if port == "" {
+			// If the port field is empty (target ends with colon), e.g. "[::1]:", this is an error.
+			return "", "", errEndsWithColon
+		}
+		// target has port, i.e ipv4-host:port, [ipv6-host]:port, host-name:port
+		if host == "" {
+			// Keep consistent with net.Dial(): If the host is empty, as in ":80", the local system is assumed.
+			host = "localhost"
+		}
+		return host, port, nil
+	}
+	if host, port, err = net.SplitHostPort(target + ":" + defaultPort); err == nil {
+		// target doesn't have port
+		return host, port, nil
+	}
+	return "", "", fmt.Errorf("invalid target address %v, error info: %v", target, err)
+}
+
+type rawChoice struct {
+	ClientLanguage *[]string        `json:"clientLanguage,omitempty"`
+	Percentage     *int             `json:"percentage,omitempty"`
+	ClientHostName *[]string        `json:"clientHostName,omitempty"`
+	ServiceConfig  *json.RawMessage `json:"serviceConfig,omitempty"`
+}
+
+func containsString(a *[]string, b string) bool {
+	if a == nil {
+		return true
+	}
+	for _, c := range *a {
+		if c == b {
+			return true
+		}
+	}
+	return false
+}
+
+func chosenByPercentage(a *int) bool {
+	if a == nil {
+		return true
+	}
+	return grpcrand.Intn(100)+1 <= *a
+}
+
+func canaryingSC(js string) string {
+	if js == "" {
+		return ""
+	}
+	var rcs []rawChoice
+	err := json.Unmarshal([]byte(js), &rcs)
+	if err != nil {
+		grpclog.Warningf("grpc: failed to parse service config json string due to %v.\n", err)
+		return ""
+	}
+	cliHostname, err := os.Hostname()
+	if err != nil {
+		grpclog.Warningf("grpc: failed to get client hostname due to %v.\n", err)
+		return ""
+	}
+	var sc string
+	for _, c := range rcs {
+		if !containsString(c.ClientLanguage, golang) ||
+			!chosenByPercentage(c.Percentage) ||
+			!containsString(c.ClientHostName, cliHostname) ||
+			c.ServiceConfig == nil {
+			continue
+		}
+		sc = string(*c.ServiceConfig)
+		break
+	}
+	return sc
+}