diff --git a/vendor/github.com/coreos/etcd/raft/rawnode.go b/vendor/github.com/coreos/etcd/raft/rawnode.go
new file mode 100644
index 0000000..925cb85
--- /dev/null
+++ b/vendor/github.com/coreos/etcd/raft/rawnode.go
@@ -0,0 +1,266 @@
+// Copyright 2015 The etcd Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package raft
+
+import (
+	"errors"
+
+	pb "github.com/coreos/etcd/raft/raftpb"
+)
+
+// ErrStepLocalMsg is returned when try to step a local raft message
+var ErrStepLocalMsg = errors.New("raft: cannot step raft local message")
+
+// ErrStepPeerNotFound is returned when try to step a response message
+// but there is no peer found in raft.prs for that node.
+var ErrStepPeerNotFound = errors.New("raft: cannot step as peer not found")
+
+// RawNode is a thread-unsafe Node.
+// The methods of this struct correspond to the methods of Node and are described
+// more fully there.
+type RawNode struct {
+	raft       *raft
+	prevSoftSt *SoftState
+	prevHardSt pb.HardState
+}
+
+func (rn *RawNode) newReady() Ready {
+	return newReady(rn.raft, rn.prevSoftSt, rn.prevHardSt)
+}
+
+func (rn *RawNode) commitReady(rd Ready) {
+	if rd.SoftState != nil {
+		rn.prevSoftSt = rd.SoftState
+	}
+	if !IsEmptyHardState(rd.HardState) {
+		rn.prevHardSt = rd.HardState
+	}
+	if rn.prevHardSt.Commit != 0 {
+		// In most cases, prevHardSt and rd.HardState will be the same
+		// because when there are new entries to apply we just sent a
+		// HardState with an updated Commit value. However, on initial
+		// startup the two are different because we don't send a HardState
+		// until something changes, but we do send any un-applied but
+		// committed entries (and previously-committed entries may be
+		// incorporated into the snapshot, even if rd.CommittedEntries is
+		// empty). Therefore we mark all committed entries as applied
+		// whether they were included in rd.HardState or not.
+		rn.raft.raftLog.appliedTo(rn.prevHardSt.Commit)
+	}
+	if len(rd.Entries) > 0 {
+		e := rd.Entries[len(rd.Entries)-1]
+		rn.raft.raftLog.stableTo(e.Index, e.Term)
+	}
+	if !IsEmptySnap(rd.Snapshot) {
+		rn.raft.raftLog.stableSnapTo(rd.Snapshot.Metadata.Index)
+	}
+	if len(rd.ReadStates) != 0 {
+		rn.raft.readStates = nil
+	}
+}
+
+// NewRawNode returns a new RawNode given configuration and a list of raft peers.
+func NewRawNode(config *Config, peers []Peer) (*RawNode, error) {
+	if config.ID == 0 {
+		panic("config.ID must not be zero")
+	}
+	r := newRaft(config)
+	rn := &RawNode{
+		raft: r,
+	}
+	lastIndex, err := config.Storage.LastIndex()
+	if err != nil {
+		panic(err) // TODO(bdarnell)
+	}
+	// If the log is empty, this is a new RawNode (like StartNode); otherwise it's
+	// restoring an existing RawNode (like RestartNode).
+	// TODO(bdarnell): rethink RawNode initialization and whether the application needs
+	// to be able to tell us when it expects the RawNode to exist.
+	if lastIndex == 0 {
+		r.becomeFollower(1, None)
+		ents := make([]pb.Entry, len(peers))
+		for i, peer := range peers {
+			cc := pb.ConfChange{Type: pb.ConfChangeAddNode, NodeID: peer.ID, Context: peer.Context}
+			data, err := cc.Marshal()
+			if err != nil {
+				panic("unexpected marshal error")
+			}
+
+			ents[i] = pb.Entry{Type: pb.EntryConfChange, Term: 1, Index: uint64(i + 1), Data: data}
+		}
+		r.raftLog.append(ents...)
+		r.raftLog.committed = uint64(len(ents))
+		for _, peer := range peers {
+			r.addNode(peer.ID)
+		}
+	}
+
+	// Set the initial hard and soft states after performing all initialization.
+	rn.prevSoftSt = r.softState()
+	if lastIndex == 0 {
+		rn.prevHardSt = emptyState
+	} else {
+		rn.prevHardSt = r.hardState()
+	}
+
+	return rn, nil
+}
+
+// Tick advances the internal logical clock by a single tick.
+func (rn *RawNode) Tick() {
+	rn.raft.tick()
+}
+
+// TickQuiesced advances the internal logical clock by a single tick without
+// performing any other state machine processing. It allows the caller to avoid
+// periodic heartbeats and elections when all of the peers in a Raft group are
+// known to be at the same state. Expected usage is to periodically invoke Tick
+// or TickQuiesced depending on whether the group is "active" or "quiesced".
+//
+// WARNING: Be very careful about using this method as it subverts the Raft
+// state machine. You should probably be using Tick instead.
+func (rn *RawNode) TickQuiesced() {
+	rn.raft.electionElapsed++
+}
+
+// Campaign causes this RawNode to transition to candidate state.
+func (rn *RawNode) Campaign() error {
+	return rn.raft.Step(pb.Message{
+		Type: pb.MsgHup,
+	})
+}
+
+// Propose proposes data be appended to the raft log.
+func (rn *RawNode) Propose(data []byte) error {
+	return rn.raft.Step(pb.Message{
+		Type: pb.MsgProp,
+		From: rn.raft.id,
+		Entries: []pb.Entry{
+			{Data: data},
+		}})
+}
+
+// ProposeConfChange proposes a config change.
+func (rn *RawNode) ProposeConfChange(cc pb.ConfChange) error {
+	data, err := cc.Marshal()
+	if err != nil {
+		return err
+	}
+	return rn.raft.Step(pb.Message{
+		Type: pb.MsgProp,
+		Entries: []pb.Entry{
+			{Type: pb.EntryConfChange, Data: data},
+		},
+	})
+}
+
+// ApplyConfChange applies a config change to the local node.
+func (rn *RawNode) ApplyConfChange(cc pb.ConfChange) *pb.ConfState {
+	if cc.NodeID == None {
+		rn.raft.resetPendingConf()
+		return &pb.ConfState{Nodes: rn.raft.nodes()}
+	}
+	switch cc.Type {
+	case pb.ConfChangeAddNode:
+		rn.raft.addNode(cc.NodeID)
+	case pb.ConfChangeAddLearnerNode:
+		rn.raft.addLearner(cc.NodeID)
+	case pb.ConfChangeRemoveNode:
+		rn.raft.removeNode(cc.NodeID)
+	case pb.ConfChangeUpdateNode:
+		rn.raft.resetPendingConf()
+	default:
+		panic("unexpected conf type")
+	}
+	return &pb.ConfState{Nodes: rn.raft.nodes()}
+}
+
+// Step advances the state machine using the given message.
+func (rn *RawNode) Step(m pb.Message) error {
+	// ignore unexpected local messages receiving over network
+	if IsLocalMsg(m.Type) {
+		return ErrStepLocalMsg
+	}
+	if pr := rn.raft.getProgress(m.From); pr != nil || !IsResponseMsg(m.Type) {
+		return rn.raft.Step(m)
+	}
+	return ErrStepPeerNotFound
+}
+
+// Ready returns the current point-in-time state of this RawNode.
+func (rn *RawNode) Ready() Ready {
+	rd := rn.newReady()
+	rn.raft.msgs = nil
+	return rd
+}
+
+// HasReady called when RawNode user need to check if any Ready pending.
+// Checking logic in this method should be consistent with Ready.containsUpdates().
+func (rn *RawNode) HasReady() bool {
+	r := rn.raft
+	if !r.softState().equal(rn.prevSoftSt) {
+		return true
+	}
+	if hardSt := r.hardState(); !IsEmptyHardState(hardSt) && !isHardStateEqual(hardSt, rn.prevHardSt) {
+		return true
+	}
+	if r.raftLog.unstable.snapshot != nil && !IsEmptySnap(*r.raftLog.unstable.snapshot) {
+		return true
+	}
+	if len(r.msgs) > 0 || len(r.raftLog.unstableEntries()) > 0 || r.raftLog.hasNextEnts() {
+		return true
+	}
+	if len(r.readStates) != 0 {
+		return true
+	}
+	return false
+}
+
+// Advance notifies the RawNode that the application has applied and saved progress in the
+// last Ready results.
+func (rn *RawNode) Advance(rd Ready) {
+	rn.commitReady(rd)
+}
+
+// Status returns the current status of the given group.
+func (rn *RawNode) Status() *Status {
+	status := getStatus(rn.raft)
+	return &status
+}
+
+// ReportUnreachable reports the given node is not reachable for the last send.
+func (rn *RawNode) ReportUnreachable(id uint64) {
+	_ = rn.raft.Step(pb.Message{Type: pb.MsgUnreachable, From: id})
+}
+
+// ReportSnapshot reports the status of the sent snapshot.
+func (rn *RawNode) ReportSnapshot(id uint64, status SnapshotStatus) {
+	rej := status == SnapshotFailure
+
+	_ = rn.raft.Step(pb.Message{Type: pb.MsgSnapStatus, From: id, Reject: rej})
+}
+
+// TransferLeader tries to transfer leadership to the given transferee.
+func (rn *RawNode) TransferLeader(transferee uint64) {
+	_ = rn.raft.Step(pb.Message{Type: pb.MsgTransferLeader, From: transferee})
+}
+
+// ReadIndex requests a read state. The read state will be set in ready.
+// Read State has a read index. Once the application advances further than the read
+// index, any linearizable read requests issued before the read request can be
+// processed safely. The read state will have the same rctx attached.
+func (rn *RawNode) ReadIndex(rctx []byte) {
+	_ = rn.raft.Step(pb.Message{Type: pb.MsgReadIndex, Entries: []pb.Entry{{Data: rctx}}})
+}