diff --git a/vendor/github.com/uber/jaeger-client-go/thrift/header_transport.go b/vendor/github.com/uber/jaeger-client-go/thrift/header_transport.go
new file mode 100644
index 0000000..f5736df
--- /dev/null
+++ b/vendor/github.com/uber/jaeger-client-go/thrift/header_transport.go
@@ -0,0 +1,810 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+package thrift
+
+import (
+	"bufio"
+	"bytes"
+	"compress/zlib"
+	"context"
+	"encoding/binary"
+	"errors"
+	"fmt"
+	"io"
+	"io/ioutil"
+)
+
+// Size in bytes for 32-bit ints.
+const size32 = 4
+
+type headerMeta struct {
+	MagicFlags   uint32
+	SequenceID   int32
+	HeaderLength uint16
+}
+
+const headerMetaSize = 10
+
+type clientType int
+
+const (
+	clientUnknown clientType = iota
+	clientHeaders
+	clientFramedBinary
+	clientUnframedBinary
+	clientFramedCompact
+	clientUnframedCompact
+)
+
+// Constants defined in THeader format:
+// https://github.com/apache/thrift/blob/master/doc/specs/HeaderFormat.md
+const (
+	THeaderHeaderMagic  uint32 = 0x0fff0000
+	THeaderHeaderMask   uint32 = 0xffff0000
+	THeaderFlagsMask    uint32 = 0x0000ffff
+	THeaderMaxFrameSize uint32 = 0x3fffffff
+)
+
+// THeaderMap is the type of the header map in THeader transport.
+type THeaderMap map[string]string
+
+// THeaderProtocolID is the wrapped protocol id used in THeader.
+type THeaderProtocolID int32
+
+// Supported THeaderProtocolID values.
+const (
+	THeaderProtocolBinary  THeaderProtocolID = 0x00
+	THeaderProtocolCompact THeaderProtocolID = 0x02
+	THeaderProtocolDefault                   = THeaderProtocolBinary
+)
+
+// Declared globally to avoid repetitive allocations, not really used.
+var globalMemoryBuffer = NewTMemoryBuffer()
+
+// Validate checks whether the THeaderProtocolID is a valid/supported one.
+func (id THeaderProtocolID) Validate() error {
+	_, err := id.GetProtocol(globalMemoryBuffer)
+	return err
+}
+
+// GetProtocol gets the corresponding TProtocol from the wrapped protocol id.
+func (id THeaderProtocolID) GetProtocol(trans TTransport) (TProtocol, error) {
+	switch id {
+	default:
+		return nil, NewTApplicationException(
+			INVALID_PROTOCOL,
+			fmt.Sprintf("THeader protocol id %d not supported", id),
+		)
+	case THeaderProtocolBinary:
+		return NewTBinaryProtocolTransport(trans), nil
+	case THeaderProtocolCompact:
+		return NewTCompactProtocol(trans), nil
+	}
+}
+
+// THeaderTransformID defines the numeric id of the transform used.
+type THeaderTransformID int32
+
+// THeaderTransformID values.
+//
+// Values not defined here are not currently supported, namely HMAC and Snappy.
+const (
+	TransformNone THeaderTransformID = iota // 0, no special handling
+	TransformZlib                           // 1, zlib
+)
+
+var supportedTransformIDs = map[THeaderTransformID]bool{
+	TransformNone: true,
+	TransformZlib: true,
+}
+
+// TransformReader is an io.ReadCloser that handles transforms reading.
+type TransformReader struct {
+	io.Reader
+
+	closers []io.Closer
+}
+
+var _ io.ReadCloser = (*TransformReader)(nil)
+
+// NewTransformReaderWithCapacity initializes a TransformReader with expected
+// closers capacity.
+//
+// If you don't know the closers capacity beforehand, just use
+//
+//     &TransformReader{Reader: baseReader}
+//
+// instead would be sufficient.
+func NewTransformReaderWithCapacity(baseReader io.Reader, capacity int) *TransformReader {
+	return &TransformReader{
+		Reader:  baseReader,
+		closers: make([]io.Closer, 0, capacity),
+	}
+}
+
+// Close calls the underlying closers in appropriate order,
+// stops at and returns the first error encountered.
+func (tr *TransformReader) Close() error {
+	// Call closers in reversed order
+	for i := len(tr.closers) - 1; i >= 0; i-- {
+		if err := tr.closers[i].Close(); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+// AddTransform adds a transform.
+func (tr *TransformReader) AddTransform(id THeaderTransformID) error {
+	switch id {
+	default:
+		return NewTApplicationException(
+			INVALID_TRANSFORM,
+			fmt.Sprintf("THeaderTransformID %d not supported", id),
+		)
+	case TransformNone:
+		// no-op
+	case TransformZlib:
+		readCloser, err := zlib.NewReader(tr.Reader)
+		if err != nil {
+			return err
+		}
+		tr.Reader = readCloser
+		tr.closers = append(tr.closers, readCloser)
+	}
+	return nil
+}
+
+// TransformWriter is an io.WriteCloser that handles transforms writing.
+type TransformWriter struct {
+	io.Writer
+
+	closers []io.Closer
+}
+
+var _ io.WriteCloser = (*TransformWriter)(nil)
+
+// NewTransformWriter creates a new TransformWriter with base writer and transforms.
+func NewTransformWriter(baseWriter io.Writer, transforms []THeaderTransformID) (io.WriteCloser, error) {
+	writer := &TransformWriter{
+		Writer:  baseWriter,
+		closers: make([]io.Closer, 0, len(transforms)),
+	}
+	for _, id := range transforms {
+		if err := writer.AddTransform(id); err != nil {
+			return nil, err
+		}
+	}
+	return writer, nil
+}
+
+// Close calls the underlying closers in appropriate order,
+// stops at and returns the first error encountered.
+func (tw *TransformWriter) Close() error {
+	// Call closers in reversed order
+	for i := len(tw.closers) - 1; i >= 0; i-- {
+		if err := tw.closers[i].Close(); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+// AddTransform adds a transform.
+func (tw *TransformWriter) AddTransform(id THeaderTransformID) error {
+	switch id {
+	default:
+		return NewTApplicationException(
+			INVALID_TRANSFORM,
+			fmt.Sprintf("THeaderTransformID %d not supported", id),
+		)
+	case TransformNone:
+		// no-op
+	case TransformZlib:
+		writeCloser := zlib.NewWriter(tw.Writer)
+		tw.Writer = writeCloser
+		tw.closers = append(tw.closers, writeCloser)
+	}
+	return nil
+}
+
+// THeaderInfoType is the type id of the info headers.
+type THeaderInfoType int32
+
+// Supported THeaderInfoType values.
+const (
+	_            THeaderInfoType = iota // Skip 0
+	InfoKeyValue                        // 1
+	// Rest of the info types are not supported.
+)
+
+// THeaderTransport is a Transport mode that implements THeader.
+//
+// Note that THeaderTransport handles frame and zlib by itself,
+// so the underlying transport should be a raw socket transports (TSocket or TSSLSocket),
+// instead of rich transports like TZlibTransport or TFramedTransport.
+type THeaderTransport struct {
+	SequenceID int32
+	Flags      uint32
+
+	transport TTransport
+
+	// THeaderMap for read and write
+	readHeaders  THeaderMap
+	writeHeaders THeaderMap
+
+	// Reading related variables.
+	reader *bufio.Reader
+	// When frame is detected, we read the frame fully into frameBuffer.
+	frameBuffer bytes.Buffer
+	// When it's non-nil, Read should read from frameReader instead of
+	// reader, and EOF error indicates end of frame instead of end of all
+	// transport.
+	frameReader io.ReadCloser
+
+	// Writing related variables
+	writeBuffer     bytes.Buffer
+	writeTransforms []THeaderTransformID
+
+	clientType clientType
+	protocolID THeaderProtocolID
+	cfg        *TConfiguration
+
+	// buffer is used in the following scenarios to avoid repetitive
+	// allocations, while 4 is big enough for all those scenarios:
+	//
+	// * header padding (max size 4)
+	// * write the frame size (size 4)
+	buffer [4]byte
+}
+
+var _ TTransport = (*THeaderTransport)(nil)
+
+// Deprecated: Use NewTHeaderTransportConf instead.
+func NewTHeaderTransport(trans TTransport) *THeaderTransport {
+	return NewTHeaderTransportConf(trans, &TConfiguration{
+		noPropagation: true,
+	})
+}
+
+// NewTHeaderTransportConf creates THeaderTransport from the
+// underlying transport, with given TConfiguration attached.
+//
+// If trans is already a *THeaderTransport, it will be returned as is,
+// but with TConfiguration overridden by the value passed in.
+//
+// The protocol ID in TConfiguration is only useful for client transports.
+// For servers,
+// the protocol ID will be overridden again to the one set by the client,
+// to ensure that servers always speak the same dialect as the client.
+func NewTHeaderTransportConf(trans TTransport, conf *TConfiguration) *THeaderTransport {
+	if ht, ok := trans.(*THeaderTransport); ok {
+		ht.SetTConfiguration(conf)
+		return ht
+	}
+	PropagateTConfiguration(trans, conf)
+	return &THeaderTransport{
+		transport:    trans,
+		reader:       bufio.NewReader(trans),
+		writeHeaders: make(THeaderMap),
+		protocolID:   conf.GetTHeaderProtocolID(),
+		cfg:          conf,
+	}
+}
+
+// Open calls the underlying transport's Open function.
+func (t *THeaderTransport) Open() error {
+	return t.transport.Open()
+}
+
+// IsOpen calls the underlying transport's IsOpen function.
+func (t *THeaderTransport) IsOpen() bool {
+	return t.transport.IsOpen()
+}
+
+// ReadFrame tries to read the frame header, guess the client type, and handle
+// unframed clients.
+func (t *THeaderTransport) ReadFrame(ctx context.Context) error {
+	if !t.needReadFrame() {
+		// No need to read frame, skipping.
+		return nil
+	}
+
+	// Peek and handle the first 32 bits.
+	// They could either be the length field of a framed message,
+	// or the first bytes of an unframed message.
+	var buf []byte
+	var err error
+	// This is also usually the first read from a connection,
+	// so handle retries around socket timeouts.
+	_, deadlineSet := ctx.Deadline()
+	for {
+		buf, err = t.reader.Peek(size32)
+		if deadlineSet && isTimeoutError(err) && ctx.Err() == nil {
+			// This is I/O timeout and we still have time,
+			// continue trying
+			continue
+		}
+		// For anything else, do not retry
+		break
+	}
+	if err != nil {
+		return err
+	}
+
+	frameSize := binary.BigEndian.Uint32(buf)
+	if frameSize&VERSION_MASK == VERSION_1 {
+		t.clientType = clientUnframedBinary
+		return nil
+	}
+	if buf[0] == COMPACT_PROTOCOL_ID && buf[1]&COMPACT_VERSION_MASK == COMPACT_VERSION {
+		t.clientType = clientUnframedCompact
+		return nil
+	}
+
+	// At this point it should be a framed message,
+	// sanity check on frameSize then discard the peeked part.
+	if frameSize > THeaderMaxFrameSize || frameSize > uint32(t.cfg.GetMaxFrameSize()) {
+		return NewTProtocolExceptionWithType(
+			SIZE_LIMIT,
+			errors.New("frame too large"),
+		)
+	}
+	t.reader.Discard(size32)
+
+	// Read the frame fully into frameBuffer.
+	_, err = io.CopyN(&t.frameBuffer, t.reader, int64(frameSize))
+	if err != nil {
+		return err
+	}
+	t.frameReader = ioutil.NopCloser(&t.frameBuffer)
+
+	// Peek and handle the next 32 bits.
+	buf = t.frameBuffer.Bytes()[:size32]
+	version := binary.BigEndian.Uint32(buf)
+	if version&THeaderHeaderMask == THeaderHeaderMagic {
+		t.clientType = clientHeaders
+		return t.parseHeaders(ctx, frameSize)
+	}
+	if version&VERSION_MASK == VERSION_1 {
+		t.clientType = clientFramedBinary
+		return nil
+	}
+	if buf[0] == COMPACT_PROTOCOL_ID && buf[1]&COMPACT_VERSION_MASK == COMPACT_VERSION {
+		t.clientType = clientFramedCompact
+		return nil
+	}
+	if err := t.endOfFrame(); err != nil {
+		return err
+	}
+	return NewTProtocolExceptionWithType(
+		NOT_IMPLEMENTED,
+		errors.New("unsupported client transport type"),
+	)
+}
+
+// endOfFrame does end of frame handling.
+//
+// It closes frameReader, and also resets frame related states.
+func (t *THeaderTransport) endOfFrame() error {
+	defer func() {
+		t.frameBuffer.Reset()
+		t.frameReader = nil
+	}()
+	return t.frameReader.Close()
+}
+
+func (t *THeaderTransport) parseHeaders(ctx context.Context, frameSize uint32) error {
+	if t.clientType != clientHeaders {
+		return nil
+	}
+
+	var err error
+	var meta headerMeta
+	if err = binary.Read(&t.frameBuffer, binary.BigEndian, &meta); err != nil {
+		return err
+	}
+	frameSize -= headerMetaSize
+	t.Flags = meta.MagicFlags & THeaderFlagsMask
+	t.SequenceID = meta.SequenceID
+	headerLength := int64(meta.HeaderLength) * 4
+	if int64(frameSize) < headerLength {
+		return NewTProtocolExceptionWithType(
+			SIZE_LIMIT,
+			errors.New("header size is larger than the whole frame"),
+		)
+	}
+	headerBuf := NewTMemoryBuffer()
+	_, err = io.CopyN(headerBuf, &t.frameBuffer, headerLength)
+	if err != nil {
+		return err
+	}
+	hp := NewTCompactProtocol(headerBuf)
+	hp.SetTConfiguration(t.cfg)
+
+	// At this point the header is already read into headerBuf,
+	// and t.frameBuffer starts from the actual payload.
+	protoID, err := hp.readVarint32()
+	if err != nil {
+		return err
+	}
+	t.protocolID = THeaderProtocolID(protoID)
+
+	var transformCount int32
+	transformCount, err = hp.readVarint32()
+	if err != nil {
+		return err
+	}
+	if transformCount > 0 {
+		reader := NewTransformReaderWithCapacity(
+			&t.frameBuffer,
+			int(transformCount),
+		)
+		t.frameReader = reader
+		transformIDs := make([]THeaderTransformID, transformCount)
+		for i := 0; i < int(transformCount); i++ {
+			id, err := hp.readVarint32()
+			if err != nil {
+				return err
+			}
+			transformIDs[i] = THeaderTransformID(id)
+		}
+		// The transform IDs on the wire was added based on the order of
+		// writing, so on the reading side we need to reverse the order.
+		for i := transformCount - 1; i >= 0; i-- {
+			id := transformIDs[i]
+			if err := reader.AddTransform(id); err != nil {
+				return err
+			}
+		}
+	}
+
+	// The info part does not use the transforms yet, so it's
+	// important to continue using headerBuf.
+	headers := make(THeaderMap)
+	for {
+		infoType, err := hp.readVarint32()
+		if errors.Is(err, io.EOF) {
+			break
+		}
+		if err != nil {
+			return err
+		}
+		if THeaderInfoType(infoType) == InfoKeyValue {
+			count, err := hp.readVarint32()
+			if err != nil {
+				return err
+			}
+			for i := 0; i < int(count); i++ {
+				key, err := hp.ReadString(ctx)
+				if err != nil {
+					return err
+				}
+				value, err := hp.ReadString(ctx)
+				if err != nil {
+					return err
+				}
+				headers[key] = value
+			}
+		} else {
+			// Skip reading info section on the first
+			// unsupported info type.
+			break
+		}
+	}
+	t.readHeaders = headers
+
+	return nil
+}
+
+func (t *THeaderTransport) needReadFrame() bool {
+	if t.clientType == clientUnknown {
+		// This is a new connection that's never read before.
+		return true
+	}
+	if t.isFramed() && t.frameReader == nil {
+		// We just finished the last frame.
+		return true
+	}
+	return false
+}
+
+func (t *THeaderTransport) Read(p []byte) (read int, err error) {
+	// Here using context.Background instead of a context passed in is safe.
+	// First is that there's no way to pass context into this function.
+	// Then, 99% of the case when calling this Read frame is already read
+	// into frameReader. ReadFrame here is more of preventing bugs that
+	// didn't call ReadFrame before calling Read.
+	err = t.ReadFrame(context.Background())
+	if err != nil {
+		return
+	}
+	if t.frameReader != nil {
+		read, err = t.frameReader.Read(p)
+		if err == nil && t.frameBuffer.Len() <= 0 {
+			// the last Read finished the frame, do endOfFrame
+			// handling here.
+			err = t.endOfFrame()
+		} else if err == io.EOF {
+			err = t.endOfFrame()
+			if err != nil {
+				return
+			}
+			if read == 0 {
+				// Try to read the next frame when we hit EOF
+				// (end of frame) immediately.
+				// When we got here, it means the last read
+				// finished the previous frame, but didn't
+				// do endOfFrame handling yet.
+				// We have to read the next frame here,
+				// as otherwise we would return 0 and nil,
+				// which is a case not handled well by most
+				// protocol implementations.
+				return t.Read(p)
+			}
+		}
+		return
+	}
+	return t.reader.Read(p)
+}
+
+// Write writes data to the write buffer.
+//
+// You need to call Flush to actually write them to the transport.
+func (t *THeaderTransport) Write(p []byte) (int, error) {
+	return t.writeBuffer.Write(p)
+}
+
+// Flush writes the appropriate header and the write buffer to the underlying transport.
+func (t *THeaderTransport) Flush(ctx context.Context) error {
+	if t.writeBuffer.Len() == 0 {
+		return nil
+	}
+
+	defer t.writeBuffer.Reset()
+
+	switch t.clientType {
+	default:
+		fallthrough
+	case clientUnknown:
+		t.clientType = clientHeaders
+		fallthrough
+	case clientHeaders:
+		headers := NewTMemoryBuffer()
+		hp := NewTCompactProtocol(headers)
+		hp.SetTConfiguration(t.cfg)
+		if _, err := hp.writeVarint32(int32(t.protocolID)); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+		if _, err := hp.writeVarint32(int32(len(t.writeTransforms))); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+		for _, transform := range t.writeTransforms {
+			if _, err := hp.writeVarint32(int32(transform)); err != nil {
+				return NewTTransportExceptionFromError(err)
+			}
+		}
+		if len(t.writeHeaders) > 0 {
+			if _, err := hp.writeVarint32(int32(InfoKeyValue)); err != nil {
+				return NewTTransportExceptionFromError(err)
+			}
+			if _, err := hp.writeVarint32(int32(len(t.writeHeaders))); err != nil {
+				return NewTTransportExceptionFromError(err)
+			}
+			for key, value := range t.writeHeaders {
+				if err := hp.WriteString(ctx, key); err != nil {
+					return NewTTransportExceptionFromError(err)
+				}
+				if err := hp.WriteString(ctx, value); err != nil {
+					return NewTTransportExceptionFromError(err)
+				}
+			}
+		}
+		padding := 4 - headers.Len()%4
+		if padding < 4 {
+			buf := t.buffer[:padding]
+			for i := range buf {
+				buf[i] = 0
+			}
+			if _, err := headers.Write(buf); err != nil {
+				return NewTTransportExceptionFromError(err)
+			}
+		}
+
+		var payload bytes.Buffer
+		meta := headerMeta{
+			MagicFlags:   THeaderHeaderMagic + t.Flags&THeaderFlagsMask,
+			SequenceID:   t.SequenceID,
+			HeaderLength: uint16(headers.Len() / 4),
+		}
+		if err := binary.Write(&payload, binary.BigEndian, meta); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+		if _, err := io.Copy(&payload, headers); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+
+		writer, err := NewTransformWriter(&payload, t.writeTransforms)
+		if err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+		if _, err := io.Copy(writer, &t.writeBuffer); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+		if err := writer.Close(); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+
+		// First write frame length
+		buf := t.buffer[:size32]
+		binary.BigEndian.PutUint32(buf, uint32(payload.Len()))
+		if _, err := t.transport.Write(buf); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+		// Then write the payload
+		if _, err := io.Copy(t.transport, &payload); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+
+	case clientFramedBinary, clientFramedCompact:
+		buf := t.buffer[:size32]
+		binary.BigEndian.PutUint32(buf, uint32(t.writeBuffer.Len()))
+		if _, err := t.transport.Write(buf); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+		fallthrough
+	case clientUnframedBinary, clientUnframedCompact:
+		if _, err := io.Copy(t.transport, &t.writeBuffer); err != nil {
+			return NewTTransportExceptionFromError(err)
+		}
+	}
+
+	select {
+	default:
+	case <-ctx.Done():
+		return NewTTransportExceptionFromError(ctx.Err())
+	}
+
+	return t.transport.Flush(ctx)
+}
+
+// Close closes the transport, along with its underlying transport.
+func (t *THeaderTransport) Close() error {
+	if err := t.Flush(context.Background()); err != nil {
+		return err
+	}
+	return t.transport.Close()
+}
+
+// RemainingBytes calls underlying transport's RemainingBytes.
+//
+// Even in framed cases, because of all the possible compression transforms
+// involved, the remaining frame size is likely to be different from the actual
+// remaining readable bytes, so we don't bother to keep tracking the remaining
+// frame size by ourselves and just use the underlying transport's
+// RemainingBytes directly.
+func (t *THeaderTransport) RemainingBytes() uint64 {
+	return t.transport.RemainingBytes()
+}
+
+// GetReadHeaders returns the THeaderMap read from transport.
+func (t *THeaderTransport) GetReadHeaders() THeaderMap {
+	return t.readHeaders
+}
+
+// SetWriteHeader sets a header for write.
+func (t *THeaderTransport) SetWriteHeader(key, value string) {
+	t.writeHeaders[key] = value
+}
+
+// ClearWriteHeaders clears all write headers previously set.
+func (t *THeaderTransport) ClearWriteHeaders() {
+	t.writeHeaders = make(THeaderMap)
+}
+
+// AddTransform add a transform for writing.
+func (t *THeaderTransport) AddTransform(transform THeaderTransformID) error {
+	if !supportedTransformIDs[transform] {
+		return NewTProtocolExceptionWithType(
+			NOT_IMPLEMENTED,
+			fmt.Errorf("THeaderTransformID %d not supported", transform),
+		)
+	}
+	t.writeTransforms = append(t.writeTransforms, transform)
+	return nil
+}
+
+// Protocol returns the wrapped protocol id used in this THeaderTransport.
+func (t *THeaderTransport) Protocol() THeaderProtocolID {
+	switch t.clientType {
+	default:
+		return t.protocolID
+	case clientFramedBinary, clientUnframedBinary:
+		return THeaderProtocolBinary
+	case clientFramedCompact, clientUnframedCompact:
+		return THeaderProtocolCompact
+	}
+}
+
+func (t *THeaderTransport) isFramed() bool {
+	switch t.clientType {
+	default:
+		return false
+	case clientHeaders, clientFramedBinary, clientFramedCompact:
+		return true
+	}
+}
+
+// SetTConfiguration implements TConfigurationSetter.
+func (t *THeaderTransport) SetTConfiguration(cfg *TConfiguration) {
+	PropagateTConfiguration(t.transport, cfg)
+	t.cfg = cfg
+}
+
+// THeaderTransportFactory is a TTransportFactory implementation to create
+// THeaderTransport.
+//
+// It also implements TConfigurationSetter.
+type THeaderTransportFactory struct {
+	// The underlying factory, could be nil.
+	Factory TTransportFactory
+
+	cfg *TConfiguration
+}
+
+// Deprecated: Use NewTHeaderTransportFactoryConf instead.
+func NewTHeaderTransportFactory(factory TTransportFactory) TTransportFactory {
+	return NewTHeaderTransportFactoryConf(factory, &TConfiguration{
+		noPropagation: true,
+	})
+}
+
+// NewTHeaderTransportFactoryConf creates a new *THeaderTransportFactory with
+// the given *TConfiguration.
+func NewTHeaderTransportFactoryConf(factory TTransportFactory, conf *TConfiguration) TTransportFactory {
+	return &THeaderTransportFactory{
+		Factory: factory,
+
+		cfg: conf,
+	}
+}
+
+// GetTransport implements TTransportFactory.
+func (f *THeaderTransportFactory) GetTransport(trans TTransport) (TTransport, error) {
+	if f.Factory != nil {
+		t, err := f.Factory.GetTransport(trans)
+		if err != nil {
+			return nil, err
+		}
+		return NewTHeaderTransportConf(t, f.cfg), nil
+	}
+	return NewTHeaderTransportConf(trans, f.cfg), nil
+}
+
+// SetTConfiguration implements TConfigurationSetter.
+func (f *THeaderTransportFactory) SetTConfiguration(cfg *TConfiguration) {
+	PropagateTConfiguration(f.Factory, f.cfg)
+	f.cfg = cfg
+}
+
+var (
+	_ TConfigurationSetter = (*THeaderTransportFactory)(nil)
+	_ TConfigurationSetter = (*THeaderTransport)(nil)
+)