[CORD-2809] Synchronizer OLTDevice in VOLTHA
Change-Id: Ie4f2e10efd035e3fcb6066e5f7bd859179fa2fea
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..e1591ca
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,13 @@
+
+ISVENV := $(shell python -c 'import sys; print ("1" if hasattr(sys, "real_prefix") else "0")')
+
+build:
+ docker build -t xosproject/volt-synchronizer:candidate -f xos/synchronizer/Dockerfile.synchronizer ./xos/synchronizer/
+
+test:
+ifeq ($(ISVENV), 1)
+ pip install requests-mock
+ pushd xos/synchronizer/steps/; nosetests test_sync_olt_device.py; popd;
+else
+ @echo "Please activate the virtualenv and the required libraries, you can do that using the 'scripts/setup_venv.sh' tool in the 'xos' repo"
+endif
diff --git a/samples/README.md b/samples/README.md
new file mode 100644
index 0000000..da8db0e
--- /dev/null
+++ b/samples/README.md
@@ -0,0 +1,4 @@
+# Setup the vOLT Service to work with VOLTHA
+
+The TOSCA recipes in this directory are intended to support development,
+but they can be used as a starting point to configure a real deployment.
\ No newline at end of file
diff --git a/samples/olt_device.yaml b/samples/olt_device.yaml
new file mode 100644
index 0000000..e5e898c
--- /dev/null
+++ b/samples/olt_device.yaml
@@ -0,0 +1,41 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @olt_device.yaml http://192.168.99.100:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/voltservice.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ device#olt:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: test_olt
+ device_type: simulated_olt
+ host: 172.17.0.1
+ port: 50060
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
diff --git a/samples/volt_service.yaml b/samples/volt_service.yaml
new file mode 100644
index 0000000..e0a3b93
--- /dev/null
+++ b/samples/volt_service.yaml
@@ -0,0 +1,31 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @volt_service.yaml http://192.168.99.100:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/voltservice.yaml
+description: Updates the existing vOLT service with deployment specific data
+topology_template:
+ node_templates:
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+ voltha_url: 10.128.22.3:8882
+ p_onos_url: 192.168.99.100:31181
+ p_onos_user: karaf
+ p_onos_pass: karaf
diff --git a/xos/synchronizer/models/volt.xproto b/xos/synchronizer/models/volt.xproto
index 68c4352..651957e 100644
--- a/xos/synchronizer/models/volt.xproto
+++ b/xos/synchronizer/models/volt.xproto
@@ -4,6 +4,15 @@
message VOLTService (Service){
option verbose_name = "vOLT Service";
option kind = "vOLT";
+
+ required string voltha_url = 2 [max_length = 254, null = False, db_index = False, blank = False];
+ optional string voltha_user = 3 [max_length = 254, null = True, db_index = False, blank = True];
+ optional string voltha_pass = 4 [max_length = 254, null = True, db_index = False, blank = True];
+ required string p_onos_url = 5 [max_length = 254, null = False, db_index = False, blank = False];
+ optional string p_onos_user = 6 [max_length = 254, null = True, db_index = False, blank = True];
+ optional string p_onos_pass = 7 [max_length = 254, null = True, db_index = False, blank = True];
+
+ required string onu_provisioning = 8 [default = "allow_all", choices = "(('allow_all', 'Allow All'), ('pre_provisioned', 'Pre-provisione'), ('oss', 'OSS'))", null = False, db_index = False, blank = False];
}
message VOLTServiceInstance (ServiceInstance){
@@ -11,25 +20,42 @@
option owner_class_name = "VOLTService";
option verbose_name = "vOLT Service Instance";
- required string onu_type = 2 [help_text = "ONU Type", default = "v-ontani", null = False, db_index = False, blank = False];
- optional string description = 3 [max_length = 254, null = True, db_index = False, blank = True];
+ optional string description = 1 [max_length = 254, null = True, db_index = False, blank = True];
}
-message VOLTDevice (XOSBase){
- option verbose_name = "vOLT Device";
+message OLTDevice (XOSBase){
+ option verbose_name = "OLT Device";
+ option description="Represents a physical OLT device";
required manytoone volt_service->VOLTService:volt_devices = 1 [db_index = True, null = False, blank = False];
required string name = 2 [help_text = "name of device", max_length = 254, null = False, db_index = False, blank = False];
- required string device_id = 3 [help_text = "Device ID", max_length = 254, null = False, db_index = False, blank = False];
- required string device_type = 4 [help_text = "Device Type", default = "asfvolt16_olt", max_length = 254, null = False, db_index = False, blank = False];
- required string host = 5 [help_text = "Host", max_length = 254, null = False, db_index = False, blank = False];
- required int32 port = 6 [help_text = "Fabric port", null = False, db_index = False, blank = False];
+ required string device_type = 3 [help_text = "Device Type", default = "asfvolt16_olt", max_length = 254, null = False, db_index = False, blank = False];
+ required string host = 4 [help_text = "Host", max_length = 254, null = False, db_index = False, blank = False];
+ required int32 port = 5 [help_text = "Fabric port", null = False, db_index = False, blank = False];
+
+ optional string device_id = 10 [help_text = "Device ID", null = True, db_index = False, blank = False, feedback_state = True];
+ optional string admin_state = 11 [help_text = "admin_state", null = True, db_index = False, blank = False, feedback_state = True];
+ optional string oper_status = 12 [help_text = "oper_status", null = True, db_index = False, blank = False, feedback_state = True];
+ optional string of_id = 13 [help_text = "openflow id", null = True, db_index = False, blank = False, feedback_state = True];
+
+ required string uplink = 14 [default="129", help_text = "uplink port", null = False, db_index = False, blank = False];
+ required string vlan = 15 [default="3", help_text = "same as S-Tag", null = True, db_index = False, blank = False];
+ required string driver = 16 [default="pmc-olt", help_text = "Olt driver", null = True, db_index = False, blank = False];
}
-message VOLTDevicePort (XOSBase){
- option verbose_name = "vOLT Device Port";
+message ONUDevice (XOSBase){
+ option verbose_name = "ONU Device";
+ option description = "Represents a physical ONU device";
- required manytoone volt_device->VOLTDevice:ports = 1 [db_index = True, null = False, blank = False];
- required string port_id = 2 [help_text = "Port ID", max_length = 254, null = False, db_index = False, blank = False, tosca_key = True];
- required int32 s_tag = 3 [help_text = "S Tag", null = False, db_index = False, blank = False];
+ required manytoone volt_device->OLTDevice:onu_devices = 1 [db_index = True, null = False, blank = False];
+ required string serial_number = 1 [max_length = 254, null = False, db_index = False, blank = False];
+}
+
+message PONPort (XOSBase){
+ option verbose_name = "PON Port";
+
+ required string name = 1 [db_index = True, null = False, blank = False];
+ required manytoone volt_device->OLTDevice:ports = 2 [db_index = True, null = False, blank = False];
+ required string port_id = 3 [help_text = "Port ID (Feedback State)", max_length = 254, null = False, db_index = False, blank = False, tosca_key = True];
+ required int32 s_tag = 4 [help_text = "S Tag", null = False, db_index = False, blank = False];
}
diff --git a/xos/synchronizer/pull_steps/pull_olts.py b/xos/synchronizer/pull_steps/pull_olts.py
new file mode 100644
index 0000000..3ab76e0
--- /dev/null
+++ b/xos/synchronizer/pull_steps/pull_olts.py
@@ -0,0 +1,28 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from synchronizers.new_base.pullstep import PullStep
+from synchronizers.new_base.modelaccessor import OLTDevice
+
+from xosconfig import Config
+from multistructlog import create_logger
+
+log = create_logger(Config().get('logging'))
+
+class OLTDevicePullStep(PullStep):
+ def __init__(self):
+ super(OLTDevicePullStep, self).__init__(observed_model=OLTDevice)
+
+ def pull_records(self):
+ log.info("pulling OLT devices from VOLTHA")
diff --git a/xos/synchronizer/steps/sync_olt_device.py b/xos/synchronizer/steps/sync_olt_device.py
new file mode 100644
index 0000000..591f7f9
--- /dev/null
+++ b/xos/synchronizer/steps/sync_olt_device.py
@@ -0,0 +1,182 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+from synchronizers.new_base.SyncInstanceUsingAnsible import SyncStep
+from synchronizers.new_base.modelaccessor import OLTDevice
+
+from xosconfig import Config
+from multistructlog import create_logger
+from time import sleep
+import requests
+from requests.auth import HTTPBasicAuth
+
+log = create_logger(Config().get('logging'))
+
+class SyncOLTDevice(SyncStep):
+ provides = [OLTDevice]
+
+ observes = OLTDevice
+
+ @staticmethod
+ def format_url(url):
+ if 'http' in url:
+ return url
+ else:
+ return 'http://%s' % url
+
+ @staticmethod
+ def get_voltha_info(o):
+ return {
+ 'url': SyncOLTDevice.format_url(o.volt_service.voltha_url),
+ 'user': o.volt_service.voltha_user,
+ 'pass': o.volt_service.voltha_pass
+ }
+
+ @staticmethod
+ def get_p_onos_info(o):
+ return {
+ 'url': SyncOLTDevice.format_url(o.volt_service.p_onos_url),
+ 'user': o.volt_service.p_onos_user,
+ 'pass': o.volt_service.p_onos_pass
+ }
+
+ @staticmethod
+ def get_of_id_from_device(o):
+ voltha_url = SyncOLTDevice.get_voltha_info(o)['url']
+
+ r = requests.get(voltha_url + "/api/v1/logical_devices")
+
+ if r.status_code != 200:
+ raise Exception("Failed to retrieve logical devices from VOLTHA: %s" % r.text)
+
+ res = r.json()
+
+ for ld in res["items"]:
+ if ld["root_device_id"] == o.device_id:
+ return ld["id"]
+ raise Exception("Can't find a logical device for device id: %s" % o.device_id)
+
+
+ def sync_record(self, o):
+ log.info("sync'ing device", object=str(o), **o.tologdict())
+
+ voltha_url = self.get_voltha_info(o)['url']
+
+ data = {
+ "type": o.device_type,
+ "host_and_port": "%s:%s" % (o.host, o.port)
+ }
+
+ if o.device_type == 'simulated_olt':
+ # simulated devices won't accept host and port, for testing only
+ data.pop('host_and_port')
+ data['mac_address'] = "00:0c:e2:31:40:00"
+
+ log.info("pushing olt to voltha", data=data)
+
+ r = requests.post(voltha_url + "/api/v1/devices", json=data)
+
+ if r.status_code != 200:
+ raise Exception("Failed to add device: %s" % r.text)
+
+ log.info("add device response", text=r.text)
+
+ res = r.json()
+
+ print log.info("add device json res", res=res)
+
+ if not res['id']:
+ raise Exception('VOLTHA Device Id is empty, this probably means that the device is already provisioned in VOLTHA')
+ else:
+ o.device_id = res['id'];
+
+ # enable device
+
+ r = requests.post(voltha_url + "/api/v1/devices/" + o.device_id + "/enable")
+
+ if r.status_code != 200:
+ raise Exception("Failed to enable device: %s" % r.text)
+
+ # read state
+ r = requests.get(voltha_url + "/api/v1/devices/" + o.device_id).json()
+ while r['oper_status'] == "ACTIVATING":
+ log.info("Waiting for device %s (%s) to activate" % (o.name, o.device_id))
+ sleep(5)
+ r = requests.get(voltha_url + "/api/v1/devices/" + o.device_id).json()
+
+ o.admin_state = r['admin_state']
+ o.oper_status = r['oper_status']
+
+ # find of_id of device
+ o.of_id = self.get_of_id_from_device(o)
+ o.save()
+
+ # add device info to P-ONOS
+ data = {
+ "devices": {
+ o.of_id: {
+ "basic": {
+ "driver": o.driver
+ },
+ "accessDevice": {
+ "uplink": o.uplink,
+ "vlan": o.vlan
+ }
+ }
+ }
+ }
+
+ onos= self.get_p_onos_info(o)
+
+ r = requests.post(onos['url'] + '/onos/v1/network/configuration/', data=json.dumps(data), auth=HTTPBasicAuth(onos['user'], onos['pass']))
+
+ if r.status_code != 200:
+ log.error(r.text)
+ raise Exception("Failed to add device %s into ONOS" % o.name)
+ else:
+ try:
+ print r.json()
+ except Exception:
+ print r.text
+
+ def delete_record(self, o):
+
+ voltha_url = self.get_voltha_info(o)['url']
+ onos = self.get_p_onos_info(o)
+ if not o.device_id:
+ log.error("Device %s has no device_id" % o.name)
+
+ else:
+
+ # remove the device from ONOS
+ r = requests.delete(onos['url'] + '/onos/v1/network/configuration/devices/' + o.of_id, auth=HTTPBasicAuth(onos['user'], onos['pass']))
+
+ if r.status_code != 200:
+ log.error("Failed to remove device from ONOS: %s - %s" % (o.name, o.of_id), rest_responese=r.text, rest_status_code=r.status_code)
+ raise Exception("Failed to remove device in ONOS")
+
+ # disable the device
+ r = requests.post(voltha_url + "/api/v1/devices/" + o.device_id + "/disable")
+
+ if r.status_code != 200:
+ log.error("Failed to disable device in VOLTHA: %s - %s" % (o.name, o.device_id), rest_responese=r.text, rest_status_code=r.status_code)
+ raise Exception("Failed to disable device in VOLTHA")
+
+ # delete the device
+ r = requests.delete(voltha_url + "/api/v1/devices/" + o.device_id + "/delete")
+
+ if r.status_code != 200:
+ log.error("Failed to delete device in VOLTHA: %s - %s" % (o.name, o.device_id), rest_responese=r.text, rest_status_code=r.status_code)
+ raise Exception("Failed to delete device in VOLTHA")
diff --git a/xos/synchronizer/steps/sync_volt_service.py b/xos/synchronizer/steps/sync_volt_service.py
new file mode 100644
index 0000000..cae1ea3
--- /dev/null
+++ b/xos/synchronizer/steps/sync_volt_service.py
@@ -0,0 +1,61 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+from synchronizers.new_base.SyncInstanceUsingAnsible import SyncStep
+from synchronizers.new_base.modelaccessor import VOLTService
+
+from xosconfig import Config
+from multistructlog import create_logger
+from time import sleep
+import requests
+from requests.auth import HTTPBasicAuth
+
+log = create_logger(Config().get('logging'))
+
+class SyncOLTService(SyncStep):
+ provides = [VOLTService]
+
+ observes = VOLTService
+
+ @staticmethod
+ def format_url(url):
+ if 'http' in url:
+ return url
+ else:
+ return 'http://%s' % url
+
+ @staticmethod
+ def get_p_onos_info(o):
+ return {
+ 'url': SyncOLTDevice.format_url(o.volt_service.p_onos_url),
+ 'user': o.volt_service.p_onos_user,
+ 'pass': o.volt_service.p_onos_pass
+ }
+
+ def sync_record(self, o):
+ log.info("sync'ing olt service", object=str(o), **o.tologdict())
+
+ if o.onu_provisioning == "allow_all":
+ # tell ONOS to create the ONU device (POST xosapi/v1/volt/onudevices)
+ pass
+ if o.onu_provisioning == "pre_provisioned" or o.onu_provisioning == "oss":
+ # tell ONOS to update the ONU device (POST xosapi/v1/volt/onudevices/<id>)
+ # NOTE ONOS will need to find the <id>
+ # NOTE if onu_provisioning == oss then XOS will need to make a call to the oss server to validate the onu
+ pass
+
+
+ def delete_record(self, o):
+ pass
diff --git a/xos/synchronizer/steps/test_sync_olt_device.py b/xos/synchronizer/steps/test_sync_olt_device.py
new file mode 100644
index 0000000..4163e32
--- /dev/null
+++ b/xos/synchronizer/steps/test_sync_olt_device.py
@@ -0,0 +1,188 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import unittest
+from mock import patch, call, Mock, PropertyMock
+import requests_mock
+
+import os, sys
+
+# Hack to load synchronizer framework
+test_path=os.path.abspath(os.path.dirname(os.path.realpath(__file__)))
+xos_dir=os.path.join(test_path, "../../..")
+if not os.path.exists(os.path.join(test_path, "new_base")):
+ xos_dir=os.path.join(test_path, "../../../../../../orchestration/xos/xos")
+sys.path.append(xos_dir)
+sys.path.append(os.path.join(xos_dir, 'synchronizers', 'new_base'))
+# END Hack to load synchronizer framework
+
+# Setting up the config module
+from xosconfig import Config
+config = os.path.join(test_path, "../model_policies/test_config.yaml")
+Config.clear()
+Config.init(config, "synchronizer-config-schema.yaml")
+# END Setting up the config module
+
+from sync_olt_device import SyncOLTDevice
+
+class TestSyncOLTDevice(unittest.TestCase):
+
+ def setUp(self):
+ # create a mock service instance
+ o = Mock()
+ o.volt_service.voltha_url = "voltha_url"
+ o.volt_service.voltha_user = "voltha_user"
+ o.volt_service.voltha_pass = "voltha_pass"
+ o.volt_service.p_onos_url = "p_onos_url"
+ o.volt_service.p_onos_user = "p_onos_user"
+ o.volt_service.p_onos_pass = "p_onos_pass"
+
+ o.device_type = "ponsim_olt"
+ o.host = "172.17.0.1"
+ o.port = "50060"
+ o.uplink = "129"
+ o.vlan = "3"
+ o.driver = "pmc-olt"
+
+ o.tologdict.return_value = {'name': "Mock VOLTServiceInstance"}
+
+ o.save.return_value = "Saved"
+
+ self.o = o
+
+ def tearDown(self):
+ self.o = None
+
+ def test_format_url(self):
+ url = SyncOLTDevice.format_url("onf.com")
+ self.assertEqual(url, "http://onf.com")
+ url = SyncOLTDevice.format_url("http://onf.com")
+ self.assertEqual(url, "http://onf.com")
+
+ def test_get_voltha_info(self):
+ voltha_dict = SyncOLTDevice.get_voltha_info(self.o)
+
+ self.assertEqual(voltha_dict["url"], "http://voltha_url")
+ self.assertEqual(voltha_dict["user"], "voltha_user")
+ self.assertEqual(voltha_dict["pass"], "voltha_pass")
+
+ def test_get_onos_info(self):
+ p_onos_dict = SyncOLTDevice.get_p_onos_info(self.o)
+
+ self.assertEqual(p_onos_dict["url"], "http://p_onos_url")
+ self.assertEqual(p_onos_dict["user"], "p_onos_user")
+ self.assertEqual(p_onos_dict["pass"], "p_onos_pass")
+
+ @requests_mock.Mocker()
+ def test_get_of_id_from_device(self, m):
+ logical_devices = {
+ "items": [
+ {"root_device_id": "123", "id": "abc"},
+ {"root_device_id": "0001cc4974a62b87", "id": "0001000000000001"}
+ ]
+ }
+ m.get("http://voltha_url/api/v1/logical_devices", status_code=200, json=logical_devices)
+ self.o.device_id = "123"
+ of_id = SyncOLTDevice.get_of_id_from_device(self.o)
+ self.assertEqual(of_id, "abc")
+
+ with self.assertRaises(Exception) as e:
+ self.o.device_id = "idonotexist"
+ SyncOLTDevice.get_of_id_from_device(self.o)
+ self.assertEqual(e.exception.message, "Can't find a logical device for device id: idonotexist")
+
+ @requests_mock.Mocker()
+ def test_sync_record_fail_add(self, m):
+ """
+ Should print an error if we can't add the device in VOLTHA
+ """
+ m.post("http://voltha_url/api/v1/devices", status_code=500, text="MockError")
+
+ with self.assertRaises(Exception) as e:
+ SyncOLTDevice().sync_record(self.o)
+ self.assertEqual(e.exception.message, "Failed to add device: MockError")
+
+ @requests_mock.Mocker()
+ def test_sync_record_fail_no_id(self, m):
+ """
+ Should print an error if VOLTHA does not return the device id
+ """
+ m.post("http://voltha_url/api/v1/devices", status_code=200, json={"id": ""})
+
+ with self.assertRaises(Exception) as e:
+ SyncOLTDevice().sync_record(self.o)
+ self.assertEqual(e.exception.message, "VOLTHA Device Id is empty, this probably means that the device is already provisioned in VOLTHA")
+
+ @requests_mock.Mocker()
+ def test_sync_record_fail_enable(self, m):
+ """
+ Should print an error if device.enable fails
+ """
+ m.post("http://voltha_url/api/v1/devices", status_code=200, json={"id": "123"})
+ m.post("http://voltha_url/api/v1/devices/123/enable", status_code=500, text="EnableError")
+
+ with self.assertRaises(Exception) as e:
+ SyncOLTDevice().sync_record(self.o)
+ self.assertEqual(e.exception.message, "Failed to enable device: EnableError")
+
+ @requests_mock.Mocker()
+ def test_sync_record_success(self, m):
+ """
+ If device.enable succed should fetch the state, retrieve the of_id and push it to ONOS
+ """
+ m.post("http://voltha_url/api/v1/devices", status_code=200, json={"id": "123"})
+ m.post("http://voltha_url/api/v1/devices/123/enable", status_code=200)
+ m.get("http://voltha_url/api/v1/devices/123", json={"oper_status": "ENABLED", "admin_state": "ACTIVE"})
+ logical_devices = {
+ "items": [
+ {"root_device_id": "123", "id": "abc"},
+ {"root_device_id": "0001cc4974a62b87", "id": "0001000000000001"}
+ ]
+ }
+ m.get("http://voltha_url/api/v1/logical_devices", status_code=200, json=logical_devices)
+
+ def match_onos_req(req):
+ r = req.json()['devices']
+ if not r['abc']:
+ return False
+ else:
+ if not r['abc']['basic']['driver'] == 'pmc-olt':
+ return False
+ if not r['abc']['accessDevice']['vlan'] == "3" or not r['abc']['accessDevice']['uplink'] == "129":
+ return False
+ return True
+
+ m.post("http://p_onos_url/onos/v1/network/configuration/", status_code=200, additional_matcher=match_onos_req, json={})
+
+ SyncOLTDevice().sync_record(self.o)
+ self.assertEqual(self.o.admin_state, "ACTIVE")
+ self.assertEqual(self.o.oper_status, "ENABLED")
+ self.assertEqual(self.o.of_id, "abc")
+ self.o.save.assert_called_once()
+
+ @requests_mock.Mocker()
+ def test_delete_record(self, m):
+ self.o.of_id = "abc"
+ self.o.device_id = "123"
+
+ m.delete("http://p_onos_url/onos/v1/network/configuration/devices/abc", status_code=200)
+ m.post("http://voltha_url/api/v1/devices/123/disable", status_code=200)
+ m.delete("http://voltha_url/api/v1/devices/123/delete", status_code=200)
+
+ SyncOLTDevice().delete_record(self.o)
+
+ # we don't need to assert here, if there are no exceptions it succeded
+
+if __name__ == "__main__":
+ unittest.main()
\ No newline at end of file
diff --git a/xos/synchronizer/volt_config.yaml b/xos/synchronizer/volt_config.yaml
index 12003cb..b3209aa 100644
--- a/xos/synchronizer/volt_config.yaml
+++ b/xos/synchronizer/volt_config.yaml
@@ -22,6 +22,26 @@
- VOLTService
- VOLTServiceInstance
- ServiceInstanceLink
+ - OLTDevice
dependency_graph: "/opt/xos/synchronizers/volt/model-deps"
model_policies_dir: "/opt/xos/synchronizers/volt/model_policies"
models_dir: "/opt/xos/synchronizers/volt/models"
+steps_dir: "/opt/xos/synchronizers/volt/steps"
+pull_steps_dir: "/opt/xos/synchronizers/volt/pull_steps"
+
+logging:
+ version: 1
+ handlers:
+ console:
+ class: logging.StreamHandler
+ file:
+ class: logging.handlers.RotatingFileHandler
+ filename: /var/log/xos.log
+ maxBytes: 10485760
+ backupCount: 5
+ loggers:
+ 'multistructlog':
+ handlers:
+ - console
+ - file
+ level: DEBUG